Hi there.
I am trying to install 4.1.1 Rom, and I've got this problem, no matters which rom I choose. Here are the steps I follow:
1.- Install Official 2.3.6 firmware with Odin
2.- Install Clockworkmod with Odin
3.- Go into Recovery Mode and follow the install instructions from the ROM (wipe data..., install from sd card)
4.- And here it goes. I got "Samsung Galaxy Logo - ROM Logo - Installation init" again and again. The installation shows log messages that I don't have enough time to read (something about E unknown, or can't mount. I've tried flashing with dbdata.rfs.tar, but with no luck)
Any help? Thanks in advance.
Reflash you have to flash twice and also I recommend flashing on top is cm not GB as it seems to stop imei issues
Sent from my Awesome I9000 running Slim Bean
Keep pressed the Recovery Combo until you see the Samsung Galaxy S first screen. It will force to enter Recovery mode.
Then wipe again and reflash
Instead of directly installing clockwork mod, install the cf-root kernel instead, which gives you root and CWM. That's what I normally do anyway.
He/ She doesn't need too there flashing straight to another ROM don't need root
Sent from my Awesome I9000 running Slim Bean
Thank you all for the replies.
I'll try them tonight and I'll let you know if it works out
It does that to me everytime I want to upgrade frome Gb to ICS or ICS to JB
I pull out the battery to stop the bootloop, then put it back in and get in recovery mode with three-buttons combo, then flash again the rom, it shouldnt bootloop again.
I started with last solution (remove battery and flash rom again) and it has worked out! The thing is that after removing the battery and flashing it again, "another" recovery mod is loaded and then it all goes perfect. So, thanks all for the help!
Yes as it changes the partition table and needs a different recovery to handle it properly
Sent from my Awesome I9000 running Slim Bean
Related
Hi,
after flashing from TeamRocket ICS 1.3b (which worked very well for me) to MIUI 4 Note v8 to get Livewings Edition ( I used cwm for that, but did all wipes properly) I stuck at the Logo mentioned in the threadtitle.
The problem is now: I cant get out of this.
cwm works fine, but I cant start any Rom. Tried to flash several ones, but I still keep stucking...
Has someone an idea ?
Laus007 said:
Hi,
after flashing from TeamRocket ICS 1.3b (which worked very well for me) to MIUI 4 Note v8 to get Livewings Edition ( I used cwm for that, but did all wipes properly) I stuck at the Logo mentioned in the threadtitle.
The problem is now: I cant get out of this.
cwm works fine, but I cant start any Rom. Tried to flash several ones, but I still keep stucking...
Has someone an idea ?
Click to expand...
Click to collapse
Try downloading abyss kernel 3.9 and flash it in recovery and stay in recovery and reboot recovery. Then flash any rom after wiping all the cache and dalvik and data before final rebooting the system (after flashing the rom)
This should work !!
Is it possible to flash a stock rom with odin to get back to out of the box ?
im also stuck in a bootloop when i tried flashing a stockrom over ics rom
please help
poope said:
Is it possible to flash a stock rom with odin to get back to out of the box ?
im also stuck in a bootloop when i tried flashing a stockrom over ics rom
please help
Click to expand...
Click to collapse
Use the above method i mentioned. It should work.
If nothing works then flash any rootable rom via PC Odin and you will be back to stock and then can root again and flash any other rom of your choice! Check out Dr Ketan's guide in the stickies post in development section of note forum !
got also the same predicament, just stuck in Samsung Galaxy N7000 bootup logo screen after I went to the recovery mode to format/system, format/cache..
I tried to follow the instructions actually on how to upgrade my CheckRom RevoHd v5 to Version 6...
The instructions were to format /system and format /cache... then copy the ROM to a new folder in the internal SD card...
Now the question is.. how can I copy the CheckRom RevoHD version 6.zip if I can't even boot back in recovery mode..
when I booted back.. it just stucks on that bootup logo screen.. ..
Bro how much time did you wait ? I was having the same problem! At least thats what i used to think... But turns out that the first boot takes REALLY long... took me approx 25 mins with rocketrom v22
If nothing works then flash any rootable rom via PC Odin and you will be back to stock and then can root again and flash any other rom of your choice!
Click to expand...
Click to collapse
Thanks but i'm still stuck in bootloop after flashing a stockrom with odin.
letters_to_cleo said:
got also the same predicament, just stuck in Samsung Galaxy N7000 bootup logo screen after I went to the recovery mode to format/system, format/cache..
I tried to follow the instructions actually on how to upgrade my CheckRom RevoHd v5 to Version 6...
The instructions were to format /system and format /cache... then copy the ROM to a new folder in the internal SD card...
Now the question is.. how can I copy the CheckRom RevoHD version 6.zip if I can't even boot back in recovery mode..
when I booted back.. it just stucks on that bootup logo screen.. ..
Click to expand...
Click to collapse
to boot in recovery press and hold volume up home button and power button all at same time in any screen and keep pressing till the time the samsung logo again shows up. Then leave the buttons...it should now boot in recovery.
abhisahara said:
to boot in recovery press and hold volume up home button and power button all at same time in any screen and keep pressing till the time the samsung logo again shows up. Then leave the buttons...it should now boot in recovery.
Click to expand...
Click to collapse
I already did that sir but It would really not open up recovery mode. I can however go to Download mode(with the Volume down) but what good is that anyway, right?
anyway, I have already fix my issue by reflashing it back via PC Odin...
I guess its either the instructions of flashing to the new version of CheckRom RevoHd v.6 is pretty much vague (though I really followed it to a tee) or simply the instructions are not that just well emphasized...
can you direct me to the rom you flashed via odin?
I tried flashing stock rom but i'm still in bootloop
Razor-1911 said:
Bro how much time did you wait ? I was having the same problem! At least thats what i used to think... But turns out that the first boot takes REALLY long... took me approx 25 mins with rocketrom v22
Click to expand...
Click to collapse
Was waiting for 2,5 hours , but I will try the Steps with Abyss kernel.
EDIT:
Can confirm that your method worked @ abhisahara.
Thank you very much !
poope said:
can you direct me to the rom you flashed via odin?
I tried flashing stock rom but i'm still in bootloop
Click to expand...
Click to collapse
Download any of the directly rootable rom from Dr Ketan's guide here- http://forum.xda-developers.com/showthread.php?t=1424997
and flash via PC odin !
Thanks, i'm out of bootloop, but i now i have the null keyboard error
edit solved: forgot to flash csc aswell
see my sig
what you need now to download a GB custom kernel then flash it with the current cwm: then do the following to get it right and rooted ics
1-right after flash the GB kernel go to advance and then reboot recovery.
2-boot into the new recovery flash any custom rom like darkynote.
3-bootup get mobile odin and get the chainfire repack ics LP1.
4-start mobile odin flash the chainfire repack and make sure all the boxes are ticked and wipe data also ticked.
5-after the flash is done it will reboot auto in to cwm flash the miui and all is done.
this log steps I'm telling you to follow so you won't encounter the banry count and yellow triangle.
enjoy
Hi all. I also have the same problem. Initially I'm using LiquidSmooth rom. And then I went to Criskelo rom to try the rom...and didn't like it. And I tried to restore to LiquidSmooth and failed. Now I'm stuck in bootloader and when I try to flash anything on CWM, it hangs. Even if I leave it for awhile on the menu, it'll hang too. What should I do?
Stuck on Samsung Startup Screen
I tried various Stock Roms, but unable to go ahead of Samsung bootcreen. I can get into recovery menu & also download screen, so I assume my Note is not bricked. However I tried to flash old directly rootable GB ROM, ICS ROM, Latest GB ROM(Wipe) but nothing works. While flashing latest GB ROM "N7000XXLC1 (Wipe)" ODIN was stuck in data.fs, so flash was incomplete, In other ROMS flash was complete but I was stuck on Startup screen. I tried flashing "Q1_20110914_16GB.pit" file also but no luck. I also flashed Abyss Note Kernel 3.9 & 4.2 in ICS ROM, but I don't know how to flash this kernel in GB ROM as I'm unable to get into external memory card where I transferred kernel zip file. Please help me save my Note.
I was recently using Stunner ICS but decided I wanted to go back to stock and start over. I downloaded the stock N7000XXKJ4_N7000OXXKJ4 firmware and installed it through odin. I did not receive any errors on the phone or on my PC. But now it seems like my phone is stuck in a boot loop. It just keeps showing the samsung boot animation over and over. I used the download jig to get into download mode and tried redoing the firmware twice already with no luck. One thing I did notice is that the jig is no longer resetting the binary counter. Does anyone have any other ideas or is my phone possibly bricked?
This is supposed to be in Q& A section... Anyways... Did you try wipe?
Sent from my GT-N7000 using xda premium
What worked for me having the same problem recently is go to Recovery mode (Volume up + home + power) and you'll see this funny kinda recovery, not at all CWM Do a data wipe/factory reset and then reboot.
Same thing happened with me yesterday, wipe in recovery fixed the problem
priyanv said:
This is supposed to be in Q& A section... Anyways... Did you try wipe?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I'm sorry. Mods please move to appropirate section.
Thank you guys. I was beginning to freak out. I was trying to do the recovery menu but couldn't get it to work. I thought the recovery menu was also hosed but I had the wrong buttons. All is good now! thank you so much!
First thing you need to do if you want to get back GB, flash abyss 3.9 redpill kernel.
After that flash GB rom.
So later you can flash whatever kernel you want
Sent from my GT-N7000 using xda premium
Hanging at Samsung logo; can't boot into recovery; am I bricked???
Hi guys...
I've been semi bricked for about 18 hours now. And it's starting to look like it's a full-brick.
I had the latest Gingerbread ROCKET ROM on my Samsung Galaxy Note GT-N7000, with the latest Franco kernel in place.
I thought I'd give the ICS version of ROCKET ROM a go. Flashed Abyss4.2 kernel without any hassles. Used 'advanced' to boot into recovery. Did my various wipes. Flashed the ICS Rocket Rom zip. And got caught up in the recurring boot-up, mostly upgrade, run, reboot cycle that's been described in many places.
Didn't panic.
Booted into recovery again, and flashed the ICS Rocket Rom again.
But this time, it wouldn't go past the SAMSUNG logo.
Still, I could boot into recovery.
Which I did.
And I tried to restore my Gingerbread build from Nandroid.
Tried it. But it hung on the Samsung logo again.
With one key difference... Now, no matter how much I try, I can't boot into recovery.
I *CAN* boot into 'download' mode. So I've used PC Odin to try and inject a rooted Gingerbread rom into the phone.
The instructions tell me to wait for the phone to reboot twice. Sadly, it tries its first reboot, and doesn't get past the Samsung logo. And that's where it hangs. No recovery mode either.
What shall I do??? Oh, woe is me. Etcetera.
--------------------------------------------------------
UPDATE
--------------------------------------------------------
I found a version of Abyss 4.2 kernel in tar format. I flashed it via PC ODIN, and I now seem to have a phone that can boot again.
Not much more to report at the moment, cos the battery is on about 3%, so I'm charging it now before delving further. Will give more feedback once the battery's up and running again.
Here's a link to the Abyss file: http://forum.xda-developers.com/attachment.php?attachmentid=1072122&d=1337500067
I tried all of this, was on stock ICS 4.0.3 and had it rooted.
I tried to restore a backup which was sadly on GB and then the restore of /data failed
I then tried to flash paranoid custom rom and it was successful but the phone never went any further than SAMSUNG GALAXY NOTE GT-N7000 logo
I then Flashed a direct rootable stock rom via PC odin and all was well but the phone would never go any further than the logo before mentioned
I tried flashing AbyssNote kernel via pc odin but the CWM recovery menu kept on rebooting hence leaving me with not particular choice to select
Tried wiping data, cache mem, dalvik cache but no use and now i am on stock recovery menu. please help me out
i have this Samsung i9220 china i try to flash upgrade the firmware with Odin3 v1.85 . i got stock phone can't power non recover modem non booting logo , does anyone have any ideas ?
Hi all,
A few weeks back , While trying to restore a Nandroid backup of rooted 2.3.6 Gingerbread Samsung stock XXJVU firmware, I accidentally ended up bricking my device. On of the helpful community members at XDA directed me to flash with Ezbase here and I could get my phone up and running. I stopped trying ICS roms back then, but I'd like to try a few ones now, particularly TiramiSlim v2. Can I flash the ROM right away from CWM recovery( it's not the latest version ) on top of the EZBase 2.3.3 that I am running right now or should I first restore my Nandroid backup to get to Gingerbread 2.6.6 XXJVU before flashing ?
No you can go straight ahead just remember backup efs and when going from GB to ICS the phone will reboot half way through install just go back into recovery and reflash
Sent from my Awesome I9000 running Slim Bean
Hampstead. teduredi
Latrop said:
No you can go straight ahead just remember backup efs and when going from GB to ICS the phone will reboot half way through install just go back into recovery and reflash
Sent from my Awesome I9000 running Slim Bean
Click to expand...
Click to collapse
Hey thanks for the reply. I tried to flash a CM9 nightly by going into CWM and tried to install the zip from sd card(after wiping cache and data 2-3 times) but every time, the phone shuts down seconds after the installation begins. After this the phone continues to run in a bootloop (the cyanogen splash screen followed by a very quick flash of some scrolling text ) and i cannot even enter recovery. I have to flash the EZbase ROM and then the CFROOT kernel again to get to CWM and on reflashing the entire cycle repeats itself. Any ideas why this could be happening ?
You have to remove the battery then enter cwm then reflash it reboots due to a change in the partition table
Sent from my Awesome I9000 running Slim Bean
Just got my Galaxy S back from my Mum today (After I bricked it and sent for repair) she got a note2 omg... Decided to flash a custom rom..
Here goes..
First I followed this guide completelyhttp://http://wiki.cyanogenmod.org/wiki/Samsung_Galaxy_S:_Full_Update_Guide. After I flash the CM 10, my recovery was upgraded to v6.0.1.5 after reboot. But I cannot get pass the recovery. I will have the cm boot animation, then back to recovery again. Tried reflashing the rom, doesnt say any errors but still gets stuck at recovery.
Then I went thru the method at the wiki.cyanogenmod again and successfully flashed cwm recovery 2.5 again. Tried flashing the CM10 rom again but this time round, It shows a long error message ending with "status 7"
I am still able to go into download mode.
Was on stock unrooted 2.3.3 DXJV9.
I made the super no.1 noob mistake of not making a backup........... But, why is rooting and flashing of this phone so hard.....
Pls, any help is greatly appreciated.
Btw, I have manage to flash the stock image via odin but is still stuck in a boot loop.. after Odin completed and reboot, I am back into the stock recovery with the below error messages.
It will work
scpion said:
Btw, I have manage to flash the stock image via odin but is still stuck in a boot loop.. after Odin completed and reboot, I am back into the stock recovery with the below error messages.
Click to expand...
Click to collapse
When u see red error message in stock recovery........u just wipe cache and reboot.......it will work.....
i have wiped everything many times over. but I am still stuck in the bootloop. the red error messages looked serious though.
try this
scpion said:
i have wiped everything many times over. but I am still stuck in the bootloop. the red error messages looked serious though.
Click to expand...
Click to collapse
U just use GB jw4(your region) ROM (don't use single file like PDA).........you use files separately like this [PDA,phone,CSC,pit(512 or 513)]...............use Odin 1.85 for flashing files......,when u complete the flashing it automatically reboot to fulfill the flashing...........then also it gives red error means........ clear only wipe cache and don't clear wipe all data...........reboot your system..... I think this will work for u...........:fingers-crossed:
Thanks. Have it solved. Flashed with another rom with seperate files. I was using the the all in one previously. Got it to run CM10 nightly though till now still not too sure how... But, I m real happy now. It works great so far and I couldnt understand why Sammy refuse to roll out official ones even for 4.0..
Still trying to figure out how to root, flash SGS though.. I have done so for many other device but by far,... this phone is the most complicating....
Aj rocker root
By processor only we not getting stock ICS rom but we getting custom ROM by hacking processor.............
For rooting the ROM u want to be in stock GB ROM like 2.3.5 or 2.3.6 and then u want to download this file(http://download.chainfire.eu/132/CF-Root/SGS/CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip)............. after download u want to open Odin 1.85 and select PDA then choose the downloaded file...........select start to flash the file.........reboot and enjoy the root bosssss......if u like this press thanks:fingers-crossed:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Try to see if you can flash another custom Rom, if that works then it could be that your files are corrupted..
Have you stated your problem over at CM forums..
# Sent from my blazing slimbean SGS i9000 using Tapatalk 2 #
scpion said:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Click to expand...
Click to collapse
OK fine first u want to know something boss......... every firmware having different layout........ correct procedure of flashing is u want to go step by step for enjoy the full features of the ROM ....... u r in GB ROM means then next u want to go ICS ROM........If u r in ICS ROM means then next u want to go jellybean rom and this the correct procedure to use new ROM without the problems...........:good:
scpion said:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Click to expand...
Click to collapse
OK fine first u want to know something boss......... every firmware having different layout........ correct procedure of flashing is u want to go step by step for enjoy the full features of the ROM ....... u r in GB ROM means then next u want to go ICS ROM........If u r in ICS ROM means then next u want to go jellybean rom and this the correct procedure to use new ROM without the problems...........:good:
Most times from GB to JB u have 2 flash custom 2, 3 times. So its normal when flashing custom the first time it takes u to bootanimation and hangs (take out battery and go to recovery with 3 button combo and flash again till it says install is completed) or directly into recovery.
If u wanna flash other jb rom just full wipe and flash new custom. Make sure u make a nandroid backup so u can go back easily
Madam/Sirs;
I decided to flash into a CM9 however when im trying to install the zip folder my phone suddenly restarted continuously.
i cannot enter in the CWM because after 2 seconds it will restart continuously .. it does have this red exclamation point with
the android logo. please help me . Thanks !
More info needed:
What ROM are you coming from?
Did you clear Cache/Dalvik and do Factory Reset before flashing a new ROM?
ICS/JB use different partitions. You are currently in a bootloop (most likely). You need to flash the ROM twice (first flash is repartitioning only). Pull the battery, hold volume keys, power on. In CWM flash this very same ROM one more time. If you can't get to CWM for some reason, just use One-click back to Stock ROM, flash Corn kernel, update to ICS/JB. Easy to understand step-by-step Guide here. I personally don't recommend ICS on Captivate because of EU bug.