Hey everyone.. I've been combing through forums for the past 5 hours trying to help out a buddy. He picked up an unlocked Verizon XT862 a while back, but we're having a heck of a time getting it on Manitoba's MTS network (partnered with Rogers in Manitoba, Canada). I put on .890, then rooted, safestraped, and tried Steel Droid. It won't find the MTS gsm network. I even have tried screwing around with a 883 radio and modified build.prop. It would be great if I could just run the Bell XT860 firmware as that would probably do it, but I have heard that's impossible. So has Verizon just locked the ever locking crap out of this things GSM or what? Any way I can get voice/sms/data working up here on this thing? I desperately need some help. Thanks!
System version
5.6.890.XT862.Verizon.en.US
Model number
DROID3
Android version
2.3.4
Baseband version
N_03.18.29P
Kernel version
2.6.35.7-g790a33c
[email protected] #1
Build number
5.5.1_84_D3G-55
ERI version
5
PRL version
58008
i dont think verizon locked anything.... Im using a GSM simcard in Lithuania without any problems, try switching your phone Network Mode to Global or GSM/UMTS
Hm.. Okay thanks. I'm just reloading the SBF to get it back to stock. It will find Rogers, but I can never get it to see MTS for some reason. I will keep trying.
So I reloaded the SBF and same issues. When this phone is on Network Mode: GSM/UMTS , it finds Rogers 3G and 2G. If I pick Rogers 3G, I don't get any service. It just has the red No over the signal bars. If I switch it to Network Mode: Global, it gets almost full signal strength, but in *#*#4636#*#* its using the CDMA network. If I change the preferred network type to GSM only, it never finds anything (assuming its only looking for Verizon?). If I try GSM auto (PRL), then it doesn't find anything either. I just don't get why its not finding our MTS 3G network in Network Mode: GSM/UMTS.
Try these apns
http://www.howardforums.com/showthread.php/1709183-MTS-APN-settings
Sent from my XT860 using xda premium
Yeah I have the apns from MTS already. It still doesn't seem to find MTS though. Only Rogers comes up after network scans. I'm going to try to modify the build.prop.
HiQ said:
Yeah I have the apns from MTS already. It still doesn't seem to find MTS though. Only Rogers comes up after network scans. I'm going to try to modify the build.prop.
Click to expand...
Click to collapse
Does it use the Rogers network, or have its own? What spectrum does it use? Are you sure the d3 supports its spectrum? I didn't see that info in my good search, although I did see they have a legacy cdma network, can you find that?
Sent from my XT860 using xda premium
Endoroid: Thanks for the help. Yeah they used to be purely CDMA (EVDO and 1x), but they decided to partner with Rogers in Manitoba and share the HSPA+ (21Mbps) towers. As taken from their website: Please note that any unlocked device must support 4G North American Frequencies (850Mhz), older GSM devices will not function on our new 4G network. You can find out if your device is 4G compliant by reviewing the phone's settings.
So it looks like they operate on the 850Mhz spectrum, which should be fine for the quad band XT862. I'm not 100% sure if the network search should show up MTS 3G or not. I don't have an official MTS GSM phone to check it with. It does find the following two networls:
CAN Rogers Wireless Inc. 3G (302-720)
CAN Rogers Wireless Inc. 2G (302-720)
I would assume I should see something like: CAN MTS Wireless Inc. 3G (something here), but nothing ever shows up. If I select either of the Roger's networks, nothing ever happens. It just has the red block over the signal bars and it never grabs a signal. Then I randomly get the following popup:
Network Error
No GSM/UMTS networks were found. Would you like to switch to the Global mode?
I've had it pull the 1x legacy MTS CDMA network before. I think that might have been in Global mode.
So confused.
Okay I'm RSD'ing VRZ_XT862_5.5.1_84_D3G-55_1FF_01.xml back onto this thing. That should get me back to stock, right? I don't know why it doesn't just work with the stock setup. I really should, shouldn't it? It's unlocked, just load the apns and go? Weird. Does RSD'ing that file reset the radios and everything? I'm not sure what all has been messed with on this thing. I'd like it back to virgin if possible.
Edit: So I reload that file and it boots up asking about international roaming. I agree and it pulls a network. It's MTS 1x CDMA though. I put it to GSM/UMTS and do a network search and the two Rogers networks show up again. If I pick one of them, I instantly get a notification bar error about no service and selected network unable... I have an MTS SIM in this thing and the mts apn entered. So weird.
My buddy said at one point while he was messing with it, he had it find the MTS gsm network. He can't remember what rom or what he had done, but he still couldn't get data working. Only voice/sms. Should I try a different rom? Any suggestions?
HiQ said:
Okay I'm RSD'ing VRZ_XT862_5.5.1_84_D3G-55_1FF_01.xml back onto this thing. That should get me back to stock, right? I don't know why it doesn't just work with the stock setup. I really should, shouldn't it? It's unlocked, just load the apns and go? Weird. Does RSD'ing that file reset the radios and everything? I'm not sure what all has been messed with on this thing. I'd like it back to virgin if possible.
Edit: So I reload that file and it boots up asking about international roaming. I agree and it pulls a network. It's MTS 1x CDMA though. I put it to GSM/UMTS and do a network search and the two Rogers networks show up again. If I pick one of them, I instantly get a notification bar error about no service and selected network unable... I have an MTS SIM in this thing and the mts apn entered. So weird.
My buddy said at one point while he was messing with it, he had it find the MTS gsm network. He can't remember what rom or what he had done, but he still couldn't get data working. Only voice/sms. Should I try a different rom? Any suggestions?
Click to expand...
Click to collapse
I dont think rom will matter. You could try editing the build.prop. Change default network mode from 7 to 3 and verizon global phone from 1 to 0. These are the changes needed to get d3(cdma)roms to work on my xt860(GSM) .
You could add the apns to /system/etc/apns-conf.xml I don't think that will make any difference as it should read it from the sim, but never hurts to try.
Sent from my XT860 using xda premium
That's exactly what I've been trying in regards to the build.prop. Doesn't seem like it ends up doing anything thouhg. Not sure. I will definitely try adding the apns to that other file though. Thanks again!
Ya im sort of at a loss. I've only ever used my device on the bell network(the carrier I bought it from) so I've never had to deal with this issue. Hopefully someone with more experience in this will pipe up
Sent from my XT860 using xda premium
Endoroid said:
Ya im sort of at a loss. I've only ever used my device on the bell network(the carrier I bought it from) so I've never had to deal with this issue. Hopefully someone with more experience in this will pipe up
Sent from my XT860 using xda premium
Click to expand...
Click to collapse
For some reason I recall reading about XT862 users having to flash something like the XT883 radio to access GSM networks? Or am I mixed up...
LaZiODROID said:
For some reason I recall reading about XT862 users having to flash something like the XT883 radio to access GSM networks? Or am I mixed up...
Click to expand...
Click to collapse
Hmmm... That might actually make sense. It's supposed to be locked against us gsm networks, but I wonder if it extends to Canadian networks as well. Maybe take a look in the unlock for at&t thread
Sent from my GT-P5113 using xda premium
---------- Post added at 08:51 PM ---------- Previous post was at 08:50 PM ----------
http://forum.xda-developers.com/showthread.php?t=1406812
Sent from my GT-P5113 using xda premium
Endoroid said:
Hmmm... That might actually make sense. It's supposed to be locked against us gsm networks, but I wonder if it extends to Canadian networks as well. Maybe take a look in the unlock for at&t thread
Sent from my GT-P5113 using xda premium
---------- Post added at 08:51 PM ---------- Previous post was at 08:50 PM ----------
http://forum.xda-developers.com/showthread.php?t=1406812
Sent from my GT-P5113 using xda premium
Click to expand...
Click to collapse
Hey guys.. I had sifted through most of that thread and attempted the radio and build.prop flash, but I was still having troubles. Maybe I'll give it another go. Thanks!
I'm trying to follow this post: http://forum.xda-developers.com/showpost.php?p=24176930&postcount=176 because I've never put .906 on this thing. I can get the chinese ota to install with rsd fine, but I'm having troubles getting the XT883 OTA.zip to flash. It errors out while installing with safe mode on. Should I be running a different recovery? Also, whenever I try to launch recovery from startup, it just triangle ! errors and dies. Something must be missing. Should I have CMW recovery on this thing instead or any ideas?
Data connection DROID 3
HiQ said:
That's exactly what I've been trying in regards to the build.prop. Doesn't seem like it ends up doing anything thouhg. Not sure. I will definitely try adding the apns to that other file though. Thanks again!
Click to expand...
Click to collapse
I'm having the exact same problem.
I have an unlocked DROID 3, which is working perfectly fine for voice and SMS, but no Data.
I've tried flashing the XT883 radio img, which did nothing.
I'm thinking I might just flash the whole XT883 ROM onto it, maybe it'll make a difference?
But, in regards to your case, I do recall that someone mentioned not being able to get a data connection in Canada, en they had to play around with the libmoto_ril.so file.
Here's the thread:
http://forum.xda-developers.com/showthread.php?t=1406812&page=33
It's apparently been test fro Bells and Rogers.
Hope that helps.
Cheerrs.
I just read in another thread about the stock verizon rom screwing with gsm. Trust big red. Maybe try a custom. Eclipse of mavrom are the most stable gb roms
Sent from my XT860 using xda premium
+1 for both of those roms
Sent from my HTC Raider
Endoroid said:
I just read in another thread about the stock verizon rom screwing with gsm. Trust big red. Maybe try a custom. Eclipse of mavrom are the most stable gb roms
Sent from my XT860 using xda premium
Click to expand...
Click to collapse
Flashed XT883 ROM. No luck.
Only change is that it's automatically getting the default APN's for the network. But no DATA.
At this point, Could it be a hardware issue? My voice and sms radio is working perfectly, are they linked? WIFI works fine.
Such a nice phone. pity.
Cheers.
Related
Installed Overcome 1.6.3 and Kernal 2.1.6 to my TMOUSA TAB. I also Unlocked via RotoHammer Hex Edit fix. I put in a Canadian Telus SIM card but the phone always gets signal and but it shows its on Roaming and wont make a phone call with the App. Do I need to reflash a different modem file that is compatible with Canadian Networks? Thanks!!
curlydingle said:
Installed Overcome 1.6.3 and Kernal 2.1.6 to my TMOUSA TAB. I also Unlocked via RotoHammer Hex Edit fix. I put in a Canadian Telus SIM card but the phone always gets signal and but it shows its on Roaming and wont make a phone call with the App. Do I need to reflash a different modem file that is compatible with Canadian Networks? Thanks!!
Click to expand...
Click to collapse
follow the howto unlock phone calls guide under xda galaxy tab bible, and try flashing the (modem_bell_i9000) modem.bin provided. (works great for me under overcome 1.6.4).
And if you would like to return the favor... and if you have a 5ghz dual-band router, please read my XDA post about Galaxy Tab Wireless-N at 5ghz. I could really use some constructive feedback there.
I hate to tell you this but unless you switch to Wind, you are SOL with Telus as they use the same spectrum as Bell/ATT/Rogers etc. Wind is like TMO in the states.
Sent from my GT-P1000 using XDA Premium App
slimdizzy said:
I hate to tell you this but unless you switch to Wind, you are SOL with Telus as they use the same spectrum as Bell/ATT/Rogers etc. Wind is like TMO in the states.
Click to expand...
Click to collapse
So the Tmobile versions don't support the other bands? If that is the case, I didn't know that.
I think Mobilicity.ca works on the same (AWS?) frequency as WIND also though.
commenter said:
So the Tmobile versions don't support the other bands? If that is the case, I didn't know that.
I think Mobilicity.ca works on the same (AWS?) frequency as WIND also though.
Click to expand...
Click to collapse
Maybe. I can't see them working on some other frequency that nobody else uses. Maybe phone their tech support and ask if a TMob phone will work? Good luck to you.
Sent from my GT-P1000 using XDA Premium App
The only way to get voice on your t-mobile tab is to find the roto modem switcher thread, and flash the roto-2g modem from there. Don't bother with the switch set up, because you won't get 3g anyway.
Is there a XT860 Radio Image or sbf / fastboot file that
will work on gsm (U.S. Bands, I.E. T-Mobile)?
instead of the chinese one, you know!
We have fastboot files from Brazil, Argentina and Mexico. All of these will work on an XT860 and GSM bands. Check out this thread for details and downloads:
http://forum.xda-developers.com/showthread.php?t=1370721
As far as I know, these will not give you H+, only 3G speeds. Currently the only way to have H+ on an XT860 is to be on the Bell Firmware, which we do NOT yet have an SBF for.
Hope that helps.
gbarayah said:
We have fastboot files from Brazil, Argentina and Mexico. All of these will work on an XT860 and GSM bands. Check out this thread for details and downloads:
http://forum.xda-developers.com/showthread.php?t=1370721
As far as I know, these will not give you H+, only 3G speeds. Currently the only way to have H+ on an XT860 is to be on the Bell Firmware, which we do NOT yet have an SBF for.
Hope that helps.
Click to expand...
Click to collapse
i could flash em :/
If you have an xt860 afaik any firmware will work on american gsm though T-Mobile will ply get edge speeds. If you have an xt862 I do not know if xt860 radio.img will work on an xt862. They have different radio hardware
Sent from my XT860 using xda premium
Endoroid said:
If you have an xt860 afaik any firmware will work on american gsm though T-Mobile will ply get edge speeds. If you have an xt862 I do not know if xt860 radio.img will work on an xt862. They have different radio hardware
Sent from my XT860 using xda premium
Click to expand...
Click to collapse
afaik they all have the exact same hardware, idk i have a 62, but i want a better radio, the chinese is INDECIPHERABLE :/, i would like 3g going on tmo which i'm pretty sure possible just not on the chinese radio image, also i can flash the 60's image, i just need a proper(er) img (Hopefully bell's) And a build prop to go with it, i'm making a "Ghetto Fastboot"
ericerk said:
afaik they all have the exact same hardware, idk i have a 62, but i want a better radio, the chinese is INDECIPHERABLE :/, i would like 3g going on tmo which i'm pretty sure possible just not on the chinese radio image, also i can flash the 60's image, i just need a proper(er) img (Hopefully bell's) And a build prop to go with it, i'm making a "Ghetto Fastboot"
Click to expand...
Click to collapse
As far as I know the best you can do with T-Mobile is edge speeds due to them using a band neither device ca use. I wish you the best of luck, if you succeed im sure others would be interested in your results
Sent from my XT860 using xda premium
Endoroid said:
As far as I know the best you can do with T-Mobile is edge speeds due to them using a band neither device ca use. I wish you the best of luck, if you succeed im sure others would be interested in your results
Sent from my XT860 using xda premium
Click to expand...
Click to collapse
Thanks!! we'll see how it goes
T-Mobile uses 1700 MHz for its 3G. These phones do not have compatibility with that frequency. This is what I was trying to tell you before, when I said T-Mobile's 4G is not compatible: it's the same exact network. 3G=4G, only they call it 4G when your phone is capable of greater speeds due to more advanced radio technology, not a different frequency.
T-Mobile only uses 1900 MHz for Edge, and 2100 won't work because it's 4G only, and won't work if you don't also have access to 1700, which is for both 3G and 4G. I hope this makes sense.
I'm glad you made your own thread to deal with this issue, and I hope I am wrong and that someone more knowledgeable comes along and corrects me and tells us all how to make it work. If you figure it out I will apologize as well. However, I just want it to be clear that no one who has made gsm work on the D3 has been able to (let alone interested in) getting 3G/4G to work on T-Mobile. I have assumed it is because it's an incompatibility problem between the hardware of these phones and the network you're trying to use.
Even if you had an xt860, it wouldn't work on 3G on T-Mobile, so using their radio.img and build.prop won't help on the xt862. Just because you can flash them doesn't mean they will work.
By all means, please post results and let me know if I'm wrong. As I said, I would prefer to be wrong in this case, but I don't think I am.
By the way, the xt883 radio.img shouldn't change the functionality of the phone beyond letting it connect to gsm in the US. I really don't see what your gripe is with it. Not that I'm offended or something; who cares. But I use it every day and haven't seen any results worth frowning over, let alone trying to switch to the xt860's which is not at all compatible with CDMA.
BenSWoodruff said:
T-Mobile uses 1700 MHz for its 3G. These phones do not have compatibility with that frequency. This is what I was trying to tell you before, when I said T-Mobile's 4G is not compatible: it's the same exact network. 3G=4G, only they call it 4G when your phone is capable of greater speeds due to more advanced radio technology, not a different frequency.
T-Mobile only uses 1900 MHz for Edge, and 2100 won't work because it's 4G only, and won't work if you don't also have access to 1700, which is for both 3G and 4G. I hope this makes sense.
I'm glad you made your own thread to deal with this issue, and I hope I am wrong and that someone more knowledgeable comes along and corrects me and tells us all how to make it work. If you figure it out I will apologize as well. However, I just want it to be clear that no one who has made gsm work on the D3 has been able to (let alone interested in) getting 3G/4G to work on T-Mobile. I have assumed it is because it's an incompatibility problem between the hardware of these phones and the network you're trying to use.
Even if you had an xt860, it wouldn't work on 3G on T-Mobile, so using their radio.img and build.prop won't help on the xt862. Just because you can flash them doesn't mean they will work.
By all means, please post results and let me know if I'm wrong. As I said, I would prefer to be wrong in this case, but I don't think I am.
By the way, the xt883 radio.img shouldn't change the functionality of the phone beyond letting it connect to gsm in the US. I really don't see what your gripe is with it. Not that I'm offended or something; who cares. But I use it every day and haven't seen any results worth frowning over, let alone trying to switch to the xt860's which is not at all compatible with CDMA.
Click to expand...
Click to collapse
That's how i've understood it, our devices lack the 1700 band. It will work on t-mobile network, but only at edge speeds. I do believe this has been tried. I also don't think an xt860 radio.img will work as expected on an xt862, but i wish him the best of luck. I would like to use t-mobile when i travel to the states, they have a really good pay per day plan compared to others i looked at(although for a week at a time i can live with edge speeds). and yes, xt860 is GSM only if the flash does work there will be no CDMA functionality
bp.img VS radio.img
What is the difference between bp.img and radio.img ?
Is it the same file ?
SX86 said:
What is the difference between bp.img and radio.img ?
Is it the same file ?
Click to expand...
Click to collapse
Open in a Hex Editor to compare. I don't think they are the same... I took apart all of the files in the latest Bell update with no success, as well I tried dd'ing all of the different partition blocks to my phone just before sending it into the shop to get Bell firmware re-loaded onto it and didn't get any luck... in the end it was basically an encrypted bootloader problem.
If we can get the phone bootloader-unlocked we *might* be able to use some of the dd images that were created (I have each partition from bell 2.3.4) flashed through RSD then do the upgrade to the latest Bell, which overwrites the radio and boot partitions...
Let me know if anybody is interested in them. Please note, they the whole partitions and have extra padding on them. Also, I think I missed /preinstall, but I can't remember.
I created a new thread for this... again it's the original Bell stuff 2.3.4. I can probably do the same thing for the current Firmware as well.
Please see http://forum.xda-developers.com/showthread.php?t=1449027 for the 2.3.4 dd images
I've never seen/heard of that first one you mentioned before.
Sent while mobile using Tapatalk.
BenSWoodruff said:
I've never seen/heard of that first one you mentioned before.
Sent while mobile using Tapatalk.
Click to expand...
Click to collapse
its in a candian rom, no its not the same, don't try to flash you'll mess up ur phone
So... did anyone try the XT860 radio on the XT862?
Have anyone got HTC Vivid worked for T-mobile 4G. I always get "E". I heard LTE (1700/2100) can be used for Tmobile 4G after flash a tmobile 4G radio. Is this kind of radio available for Vivid?
http://forum.xda-developers.com/showthread.php?t=1507825
http://forum.xda-developers.com/showpost.php?p=23522477&postcount=113
Ive wondered the same thing myself but found nothing but you can also use straight talk or h20 wireless if you are tired of Edge.
Sent from my HTC PH39100 using xda premium
Brightxda said:
Have anyone got HTC Vivid worked for T-mobile 4G. I always get "E". I heard LTE (1700/2100) can be used for Tmobile 4G after flash a tmobile 4G radio. Is this kind of radio available for Vivid?
http://forum.xda-developers.com/showthread.php?t=1507825
http://forum.xda-developers.com/showpost.php?p=23522477&postcount=113
Click to expand...
Click to collapse
I don't think anyone has discovered a radio yet that will allow us to use t mobile...I'm no dev so I really don't know what it takes to make a radio compatible...but if you want (risk bricking your device) you can experiment and flash some t mobile HTC radios...maybe like the sensations or something...idk
Sent from my HTC PH39100 using Tapatalk 2
I've got a Vivid on T-Mobile..haven't need to swap radios or anything. i get tmobile 4g just fine, only problem i have with mine is SMS occasionally hangs making me have to factory reset and reinstall a rom
Wolf61477 said:
I've got a Vivid on T-Mobile..haven't need to swap radios or anything. i get tmobile 4g just fine, only problem i have with mine is SMS occasionally hangs making me have to factory reset and reinstall a rom
Click to expand...
Click to collapse
That's interesting. Does you Vivid show 4G icon? How do you know it is 4G.
T-mobile uses UMTS/AWS: 1700/2100 Mhz for 3G/4G (not really 4G though), while Vivid 4G in AT&T uses LTE/700 MHz Class 17, 1700/2100 MHz. I don’t think you can use Vivid in T-mobile 4G, not even 3G, unless you flash a correct T-mobile radio.
I think the most possible working radio in Vivid for T-mobile 4G is HTC Amaze. It has UMTS: 850, (AWS) 1700/2100, 1900, 2100MHz. I am not daring to try it.
"H" icon and speedtest give speeds of 8-10mb/s down and 2mb/s up, faster than what my T-Mobile G2 was giving me.. i think on stock ics rom it was showing 4g icon but i havent used it in a while
Wolf61477 said:
"H" icon and speedtest give speeds of 8-10mb/s down and 2mb/s up, faster than what my T-Mobile G2 was giving me.. i think on stock ics rom it was showing 4g icon but i havent used it in a while
Click to expand...
Click to collapse
That's weird. I don't know how you can get 4G. I hope someone (Dev) can explain it. I always get "E" with 150kb down and 120kb up. I am in a stock ICS though. There was a thread discussed the possiblilty:
http://forum.xda-developers.com/showthread.php?t=1548553
Wolf61477 said:
"H" icon and speedtest give speeds of 8-10mb/s down and 2mb/s up, faster than what my T-Mobile G2 was giving me.. i think on stock ics rom it was showing 4g icon but i havent used it in a while
Click to expand...
Click to collapse
What ROM, radio, and kernel combo are you using?
I almost temped to try the amaze radio but I would have to read more up on it.Whats the worst could happen brick my phone and have to run the ruu.what do you guys think?
Sent from my HTC Holiday using xda premium
Mjones307 said:
I almost temped to try the amaze radio but I would have to read more up on it.Whats the worst could happen brick my phone and have to run the ruu.what do you guys think?
Sent from my HTC Holiday using xda premium
Click to expand...
Click to collapse
I have no clue what the ramifications are. Are the platforms the same?
I'm still interested in what combo is used above.
So I pulled radio.img from the Amaze factory ROM: RUBY_ICS_35_S_TMOUS_2.14.531.3_R2_Radio_1.14.550L.17DC_30.78.550L.15_release_262141_signed.zip
According to this, the radio is 1.14.550L.17DC_30.78.550L.15. I did a fastboot flash (fastboot flash radio radio.img) and it did it, had progress bars on the screen, and the cmd prompt windows said OKAY. However, when I go into Settings > About Phone > Software Info > More, the Baseband still shows 3.02.4740.14_34.22.701040.19, and I still have the E at the top.
It was worth a shot...
**EDIT**
Fastboot output:
Code:
fastboot.exe flash radio radio.img
sending 'radio' (21997 KB)... OKAY
writing 'radio'... OKAY
I get the green progress bar during sending, and then the red progress bar during writing, so I thought it worked.
cougar694u said:
What ROM, radio, and kernel combo are you using?
Click to expand...
Click to collapse
All in the screenshots.. ive not changed out the radio at all, using Virtuous Inquisition and at the time it was probably one of the older Kozmic kernels
Same baseband as mine. I might try this ROM & Kernel combo to see if I get the H. You said 'at the time', are you using a different combo now and still getting HSPA+?
Another question I had was regarding your SMS issue, do you still have it? Mine generally works for a few days, the any SMS I send is stuck in 'Pending'. If I reboot, the first message (or oldest in the queue) will go out, but no others. If I do a full wipe in recovery, SMS works again.
cougar694u said:
Same baseband as mine. I might try this ROM & Kernel combo to see if I get the H. You said 'at the time', are you using a different combo now and still getting HSPA+?
Another question I had was regarding your SMS issue, do you still have it? Mine generally works for a few days, the any SMS I send is stuck in 'Pending'. If I reboot, the first message (or oldest in the queue) will go out, but no others. If I do a full wipe in recovery, SMS works again.
Click to expand...
Click to collapse
still using kozmics kernel, just updated and i still get hspa+, as for the sms issues, yes i still have the problems where it gets stuck on sending and even when i restart that txt usually does not go through and i end up having to do a factory reset or restore a backup and it works again for a while, then quits..i just rinse and repeat when this happens
Gonna test the ROM & kernel shortly. Was hoping for a fix for the SMS issue, but been using gvoice as a workaround.
---------- Post added at 02:17 PM ---------- Previous post was at 01:45 PM ----------
Running Virtuous Inquisition v4.0.2.1 & KozmiKKernel RC2 and still only have the E. I tried changing the bearer for the APN to eHRPD & LTE, but I lose mobile data, I have to leave it as Unspecified.
What does it show for Mobile network type in Settings > About phone > Status?
Man this SMS issue is annoying. Took backup, full wipe, loaded Virtuous ROM, SMS worked fine, backup of Virtuous, wipe, restore of Stock ICS, no SMS
when im at home i usually get stuck on edge only..when i leave home im able to pick up 3g and 4g..took these screenshots today while i was out
That's awesome. Maybe I didn't leave mine on long enough? On the Note & Skyrocket threads, people mentioned signal degradation. I normally only get EDGE inside my work, but 4G outside the building. I tested outside the building, but reflashed to stock after. The non-working contacts autofill killed me. Now the no sms is killing me, maybe I'll try virtuous again shortly.
Only difference I see is that ? in the square after T-Mobile, and 0 dBm
Sent from my HTC PH39100 using xda app-developers app
cougar694u said:
Only difference I see is that ? in the square after T-Mobile, and 0 dBm
View attachment 1238535
Sent from my HTC PH39100 using xda app-developers app
Click to expand...
Click to collapse
that's weird..did you go to settings/more.../mobile network/network operators and search for network?
Anyone know whether or not data works on the new KEXEC builds on a XT862 unlocked for GSM? I'm thinking about switching over to the KEXEC CM10, but want to know if i could still use data. If not, I'll stick with current ROM.
Yes I use T-Mobile. Look for 883 build.props in the thread.
Sent from my XT862 using xda app-developers app
MrObvious said:
Yes I use T-Mobile. Look for 883 build.props in the thread.
Sent from my XT862 using xda app-developers app
Click to expand...
Click to collapse
well i'm sorry to say that in the last year i have been tried all of the available CM9 roms, none of them have a 3G ability to a xt860.....
jawsofire said:
Anyone know whether or not data works on the new KEXEC builds on a XT862 unlocked for GSM? I'm thinking about switching over to the KEXEC CM10, but want to know if i could still use data. If not, I'll stick with current ROM.
Click to expand...
Click to collapse
Yes the xt862 has data on kexec. http://forum.xda-developers.com/showthread.php?t=1989359 here is my info and files about it.
boazal said:
well i'm sorry to say that in the last year i have been tried all of the available CM9 roms, none of them have a 3G ability to a xt860.....
Click to expand...
Click to collapse
The 862 and 860 are different phones. Other people have been able to get 3G on the 860 from what I've seen, or at least Edge.
Skreelink said:
Yes the xt862 has data on kexec. http://forum.xda-developers.com/showthread.php?t=1989359 here is my info and files about it.
Click to expand...
Click to collapse
From what I'm reading, I need to switch radios. I'm running the XT862 Radio unlocked for US GSM. Would that still work or do I have to flash the a different radio?
jawsofire said:
From what I'm reading, I need to switch radios. I'm running the XT862 Radio unlocked for US GSM. Would that still work or do I have to flash the a different radio?
Click to expand...
Click to collapse
What system do you have in your Setings, About, Status? It should tell you the radio version there. If you use T-Mobile/AT&T then it's probably the 883 and you can find the appropriate build.prop for any ROM.
MrObvious said:
What system do you have in your Setings, About, Status? It should tell you the radio version there. If you use T-Mobile/AT&T then it's probably the 883 and you can find the appropriate build.prop for any ROM.
Click to expand...
Click to collapse
I have the XT862 Radio.
jawsofire said:
I have the XT862 Radio.
Click to expand...
Click to collapse
Then if you are trying to use AT&T/T-Mobile you need the 883 radio/build.prop.
MrObvious said:
Then if you are trying to use AT&T/T-Mobile you need the 883 radio/build.prop.
Click to expand...
Click to collapse
It seems like there are a large handful of people having connection issues with the 883 radio. I think I'll just stick with the XT862 radio. I could always give it a try and if it doesn't work, SBF back to stock.
jawsofire said:
It seems like there are a large handful of people having connection issues with the 883 radio. I think I'll just stick with the XT862 radio. I could always give it a try and if it doesn't work, SBF back to stock.
Click to expand...
Click to collapse
The XT883 radio is ONLY required if you're using domestic GSM, such as AT&T or T-Mobile. The XT862 stock radio has an MNC block on 310 (US gsm carriers) but will be unlocked for all foreign carriers, this ensures the D3 is not used in the US on major competitors
Also, if you test the XT883 radio.. why not just reflash the stock radio instead of an entire SBF? I've done this several times. Just make sure you have a backup of the stock build.prop and restore as you flash radios. I have a build.prop.cdma and build.prop.gsm in /system and just take off the corresponding type for the one I want to use. I've uploaded the stock XT862 radio before.
I currently use the XT883 radio and have no issues with connectivity, I've also written a build.prop for use with the XT883 radio on kexec roms and has no issues either. HSPA data everywhere.
883 worked fine for me on that ROM.
Sent from my DROID3 using xda app-developers app
Skreelink said:
The XT883 radio is ONLY required if you're using domestic GSM, such as AT&T or T-Mobile. The XT862 stock radio has an MNC block on 310 (US gsm carriers) but will be unlocked for all foreign carriers, this ensures the D3 is not used in the US on major competitors
Also, if you test the XT883 radio.. why not just reflash the stock radio instead of an entire SBF? I've done this several times. Just make sure you have a backup of the stock build.prop and restore as you flash radios. I have a build.prop.cdma and build.prop.gsm in /system and just take off the corresponding type for the one I want to use. I've uploaded the stock XT862 radio before.
I currently use the XT883 radio and have no issues with connectivity, I've also written a build.prop for use with the XT883 radio on kexec roms and has no issues either. HSPA data everywhere.
Click to expand...
Click to collapse
My phone is unlocked to use the XT862 Radio for US GSM (Don't ask how, not at liberty to say at this moment). That is why I'm asking these questions. I don't want to have to re-flash and loss the unlock like I did with my Droid 4.
jawsofire said:
My phone is unlocked to use the XT862 Radio for US GSM (Don't ask how, not at liberty to say at this moment). That is why I'm asking these questions. I don't want to have to re-flash and loss the unlock like I did with my Droid 4.
Click to expand...
Click to collapse
Besides the 883 radio? Cool. When you can you should share.
Sent from my DROID3 using xda app-developers app
I'll give it a try since I have multiple slots with safestrap. Guess I'll be the first to test. I'll let you guys know how it turns out.
Works fine with the XT862 Radio. Some things I've noticed:
Not very responsive
Picking up HDSPA and 3G instead of just 3G
Only getting 1 bar of signal instead of 4
I flashed the latest build which was CM10.1. I had some problem with the recovery since I previously had clockwork recovery installed. Upon starting the phone, I had 2 force closes(Media and Phone). Once the ROM gets smoothed out and has camera working, I'll make the final switch.
jawsofire said:
Works fine with the XT862 Radio. Some things I've noticed:
Not very responsive
Picking up HDSPA and 3G instead of just 3G
Only getting 1 bar of signal instead of 4
I flashed the latest build which was CM10.1. I had some problem with the recovery since I previously had clockwork recovery installed. Upon starting the phone, I had 2 force closes(Media and Phone). Once the ROM gets smoothed out and has camera working, I'll make the final switch.
Click to expand...
Click to collapse
HSDPA *is* 3G.
HSDPA is in the same line as UMTS, which was technically the first 3g, then HSDPA/HSUPA were developed on that technology, then HSPA, HSPA+, then dual band HSPA+ which tops at 42Mbps. They're all technically the 3g (or 3.5g if you would) standard. Albeit T-Mobile and AT&T boast their HSPA networks as '4G' cause it looks better in marketing.
The Droid 3 supports up to HSPA 14.4Mbps.
Getting 1 bar instead of 4 is normal if you haven't modified the build.prop in a stock rom, there's a line verizon had added in to make the signal look bad (although looking in status shows normal signal levels, it's just cosmetic). On a kexec rom, if your build.prop hasn't been edited correctly to have the signal fix (which is under mobile networks) it'll also be stuck at one bar instead of normal. Although, if you're somehow using the stock XT862 radio, there should be no required edits to the build.prop to get proper GSM signal bars in a Kexec rom...
Skreelink said:
HSDPA *is* 3G.
HSDPA is in the same line as UMTS, which was technically the first 3g, then HSDPA/HSUPA were developed on that technology, then HSPA, HSPA+, then dual band HSPA+ which tops at 42Mbps. They're all technically the 3g (or 3.5g if you would) standard. Albeit T-Mobile and AT&T boast their HSPA networks as '4G' cause it looks better in marketing.
The Droid 3 supports up to HSPA 14.4Mbps.
Getting 1 bar instead of 4 is normal if you haven't modified the build.prop in a stock rom, there's a line verizon had added in to make the signal look bad (although looking in status shows normal signal levels, it's just cosmetic). On a kexec rom, if your build.prop hasn't been edited correctly to have the signal fix (which is under mobile networks) it'll also be stuck at one bar instead of normal. Although, if you're somehow using the stock XT862 radio, there should be no required edits to the build.prop to get proper GSM signal bars in a Kexec rom...
Click to expand...
Click to collapse
The only change I've made to my build.prop is ro.mot.phonemode.vzwglobalphone=0.
jawsofire said:
The only change I've made to my build.prop is ro.mot.phonemode.vzwglobalphone=0.
Click to expand...
Click to collapse
Well, since you seem to be the only person ever to use the stock xt862 radio on us gsm (without proof), and do not feel compelled to share how, we cannot help. I cannot work to fix something without any knowledge of howto, considering the radio lock is in the signed radio.img, radiocomm cannot modify it, as with the d2g, the lock was in the nvitems, which can be edited. Also, the radio.img cannot be modified and flashed, as the signed keys wont match the locked bootloader and will cause brick.
So unless you can provide proof/method of using the stock xt862 radio on us gsm, sorry... My guess is you actually have the xt883 radio and your build.prop just says xt862. Sorry for stating it like this, but I can claim to use the d3 on lte, until proof and method are given, there is a very thin margin of trust.
Skreelink said:
Well, since you seem to be the only person ever to use the stock xt862 radio on us gsm (without proof), and do not feel compelled to share how, we cannot help. I cannot work to fix something without any knowledge of howto, considering the radio lock is in the signed radio.img, radiocomm cannot modify it, as with the d2g, the lock was in the nvitems, which can be edited. Also, the radio.img cannot be modified and flashed, as the signed keys wont match the locked bootloader and will cause brick.
So unless you can provide proof/method of using the stock xt862 radio on us gsm, sorry... My guess is you actually have the xt883 radio and your build.prop just says xt862. Sorry for stating it like this, but I can claim to use the d3 on lte, until proof and method are given, there is a very thin margin of trust.
Click to expand...
Click to collapse
http://imgur.com/a/5NkVv
There is some proof. I know it's hard to prove other things, but I promised not to say anything. I don't want to get anyone in trouble. I can provide more screenshots, but that is about it.
Edited..
Since lots of ppl already reported that this method doesn't work...
I just read this post in redmondpie..
and I saw the comment and one of them is trying on S4 Sprint..
II really want to try this.. but my wife brought her S4 Sprint with her so I couldn't try this at the moment..
Maybe someone would like to try this out and report this discovery?
so here's the Link:
http://goo.gl/SN8Yx
Tried it when I read it doesn't work for us
Sent from my SPH-L720 using xda premium
Be very carefully doing this on sprint S4 it may brick it cause this process only works for ATT- T-Mobile GSM phones only
I also tried it to many times with no luck I wish this worked.
Sent from my SPH-L720 using xda premium
Hello. Some one try to flash radio firmware from verizon sgs4(it has unlocked gsm) ? it work for nexus but vice verca
This method DOES NOT work. Sprint BLOCKS US GSM carriers. To get an international unlock you need to call sprint and ask for one. At this time there is NO way to get US GSM signal on the sprint S4.
EDIT: Apparently this will make your phone unable to connect to a femtocell. Be careful
Do not try this mod. It will mess up your phone and how it connects to the Sprint Airave.
trouthunter7 said:
Do not try this mod. It will mess up your phone and how it connects to the Sprint Airave.
Click to expand...
Click to collapse
I noticed this. Any way to revert this? Or will I have to go into sprint?
ehaalandtluk said:
I noticed this. Any way to revert this? Or will I have to go into sprint?
Click to expand...
Click to collapse
Not that I am aware of. I am trying a complete factory reset of the phone. I will post my results when I can.
trouthunter7 said:
Not that I am aware of. I am trying a complete factory reset of the phone. I will post my results when I can.
Click to expand...
Click to collapse
Please let me know how the factory reset works out for you. My phone is officially messed up. My 3g was not working at all. I would only connect LTE. After troubleshooting forever with sprint, my 3G is working again but it is very slow. I also notice that it does not auto roam to Verizon at all.
spydc said:
Please let me know how the factory reset works out for you. My phone is officially messed up. My 3g was not working at all. I would only connect LTE. After troubleshooting forever with sprint, my 3G is working again but it is very slow. I also notice that it does not auto roam to Verizon at all.
Click to expand...
Click to collapse
Updated: I have rebooted the phone next to the booster and then did a firmware update, PRL Update and rebooted the phone. It appears to be connecting again.
trouthunter7 said:
Updated: I have rebooted the phone next to the booster and then did a firmware update, PRL Update and rebooted the phone. It appears to be connecting again.
Click to expand...
Click to collapse
How was the speed though? It may show "3G" but my guess is that it's really 2G speed or something on TW.
yujioh said:
How was the speed though? It may show "3G" but my guess is that it's really 2G speed or something on TW.
Click to expand...
Click to collapse
I've had massive issues with my 3g after this method. The 3g is super slow and I know something is not right. Is there an app that displays the cdma band that the phone is currently operating on? I read somewhere that it screws up the phones ability to access the cdma 850 band.
Sent from my SPH-L720 using xda app-developers app
What we really need to do, is find a way to undo this. Even though my phone appears to be working. I really wish I had never tried this and could go back.
Yes I hope someone figures it out. Reflashing the stock software is not enough
Sent from my SPH-L720 using xda app-developers app
spydc said:
Yes I hope someone figures it out. Reflashing the stock software is not enough
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Update: My phone appears to be staying connected to the Airave and getting a very good signal. Data speeds were never really affected just terrible connections. :good:
I tried this also and it messed up my 3g speeds, after much searching, reading ,and experimenting,i did a SCRTN which restored modem ,lesson learned
Sent from my SPH-L720 using xda app-developers app
There is another thread that is similar to this for unlocking the sim. I tried it, and possible messed my phone up. I was getting slow 3g speeds and mobile data drop outs. I fixed my issue by doing a complete factory reset/ clearing NVRAM. This is how I did it:
Dial ##786#
Choose Reset
Enter MSL
Here is the thread I mentioned just in case one of you wants to look at it. http://forum.xda-developers.com/showthread.php?t=2282683
##786# as far as I know will restore your phone to stock .
##72786# should reset your network settings. Just make sure you are in a working 3G coverage area or have a WiFi connection or it wont re-activate. This method does not put your phone back to stock...just reactivates it on the network.
Sorry for the unusable info...
But i got this news from Sprint Htc One thread, that they are able to unlocked the device by simply rooting the phone and sending a line in terminal...
Is it possible to do this with ours?
thatotherguy.. said:
1. You should be rooted
2. Download https://play.google.com/store/apps/details?id=jackpal.androidterm
3. Run Terminal Emulator
4. Type "su" (excluding quotation marks) and grant it superuser permission
5. Type "am start com.redbend.vdmc/com.htc.omadm.test.TestMainActivity" (excluding quotation marks)
6. You will get menu on your HTC
7. In that menu, select "API", then scroll down 'till almost end and select "simlock"
8. Reboot the phone and hopefully it would accept GSM SIM
9. Enter *#*#4636#*#* in your dialer
10.In the phone information section(the first one) set preferred network type to something that is GSM specific: "WCDMA Preferred", for example. The phone will switch to GSM mode
Sent from my HTCONE using Tapatalk 4 Beta
Click to expand...
Click to collapse
Sent from my GT-P6800 using Tapatalk HD