Odin doesn't detect my device / CM9 update fail - Galaxy Tab Q&A, Help & Troubleshooting

I tried to upgrade to CM9 (before on 2.3.3) on my GT-P1000 but when i Choose the zip from the sdcard it directly boots with CM9 startup screen and reboot again and again.
Please Help me! I can get to Download Mode but Odin doesn't detect my device (I think that's because of zadig).
I'm begging you please help me (even to get back to 2.3) i'm out of phone now
PS: I followed instructions here : wiki.cyanogenmod.com/wiki/Samsung_Galaxy_Tab_(GSM):_Full_Update_Guide

probably the well known boot loop?
Did you try booting to recovery and flash one more time?

OMG thank you so much i pressed on the power button and the volume up button at the same time (where as i must press the volume up later) that's why i can't get to recovery mode
You saved my life thank you!! :good::good::laugh::laugh:

Related

[Q] Flash Custom ROM with Odin?

Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
If you can get into download mode (power off, hold V+/V-, insert USB), you can try flashing a ROM via Heimdall. Apex 12.5 has a package you can flash from Heimdall.
You can also try Mosaic 9, as that has an Odin-based installer package.
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
yes you can, use the link below and download any of the latest rom with bootloader based on odin.
http://forum.xda-developers.com/showthread.php?t=1300843
Galaxy Grand Bricked
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
KrisjNoel said:
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
Click to expand...
Click to collapse
Read above, the answer was given.
http://forum.xda-developers.com/showthread.php?t=1300843
same problem but on a different device its gt-i9070 by samsung I download ROMs already but cant flash them there is absolute no custom recovery for this model tried anything and everything on google and xda , any solution to apply ROM not using recovery
Is this file can use to flash i9300??? Where can i get custom rom for gt-i9300 that flash via odin...bcoz my s3 also cannot boot to recovery mode to hard reset
Hey,
I'm using samsung galaxy star s5282. I rooted this phone 2 days ago. Everything went good until today when i was i my class it suddenly switched off. When i rebooted it, it hang on the samsung logo.
I tried to boot into cwm recovery mode by pressing v+, home, power but it boots into default system recovery mode.
I again flashed cwm recovery many times using odin but it dosent work. Odin shows pass but when i reboot my phone in cwm recovery mode my phone enters in default system recovery mode.
What should i do please please please help.....
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
applies to all recoveries
cheers
bhavnoor singh
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
Surenda 1863,
I had exactly the same problem and it took me almost one week of fiiddling and searching the Web to solve it.
The solution was in front me since day ONE : install ODIN on the PC !
In my case, I had I had accidentally wiped out the stock ROM and the tablet was hopelessly frozen on the download mode. I couldn't turn it off to boot it back with any of the usual buttons ( Volume , Home, Power)
I made the wrong assumption that since my PC didn't see the tablet, it couldn't connect to Odin either . I was wrong!
Here is what you have to do:
1. Install Odin on your PC. Connect the tablet to it. You will see that Odin sees the tablet because there will be a caption saying "added" on the top left.
2. Press the AP tab button at the right to go to the location where your Stock ROM is. The stock ROM file will have an MD5 ending.
3 Once the file is loaded (next to the AP button) just press Start. You will see the DOWNLOAD bar gradually filling up on the tablet and at the top left of ODIN.
4. When the operation is terminated, you will see a caption " PASSED" at the top left of he Odin screen and the tablet will automatically boot up to the HOME screen.
As simple as this! I didn't even have to worry about flashing the TWRP ( or CWR) recovery system, probably because the OS ROM was already wiped out. May be your case is different. I only know that in my case it worked like a charm.
Ittiandro

[Q] Power reset or unknown upload mode after flashing CM10

Hello guys!
While flashing to CM10 from CM9, my phone rebooted and stopped into screen "Power Reset or Unknown upload mode", no keys are pressed while booting. Any ideas how to fix this? I discharged battery completely and put it again but still this screen shows up.
any idea?
try to enter download mode it seems that kernel is broken
Sent from my GT-I9001 using xda premium
Enter download mode, and then using odin just install any custom firmware or a stock firmware !
Hope it helps ! :fingers-crossed:
i've tried home + vol down+ power button
only logo of Samsung showed up, after that annoying message "Power reset......"
any idea?
Are you able to boot into CWM? if yes, ask someone if he can take your sd card and download a CWMflashable zip to it. The plug it into your own phone and flash... :fingers are crossed for you:
------------------------------
working on:
SuperRom64 (2.3.6)
Project Stock (4.0.4)
whatever i'd press, all the time i see samsung logo and after 30 secs an error message.
1. Switch off your mobile.
2. Now, press and hold the volume up key and the power button. Leave both buttons when you see the SAMSUNG logo.
3. After "Galaxy S" splash screen you will get a white box and android logo image like below,then press menu soft key and wait some second.
4. If you boot into recovery, then wipe everything and then flash the ROM.
And it seems that you have managed to brick your mobile ! But try this I hope it solves your problem.
Doesnt work ;/ will try with jig
HAve the same problem
baju said:
Doesnt work ;/ will try with jig
Click to expand...
Click to collapse
Hello Well I got the same message when trying to install a rom to my i9003 and after trying many times i was able to get to CWM by presing the volume up + power and menu, thank god I always have a back up Rom in the SD so i was able to reinstall evrything... hope this works for you..

[Q] Soft Bricked Mini2?... Help plz

Hi guys, so i got a new Mini2, and... messed with it, pulled a firmware version from a dif zone by mistake... after i had cwm jena and clockworkz working, installed that asian firmware, and never got the phone to work again, tried several stock rom installs (17 and counting, with/without jena firmware download also), it just keeps doing the boot loop, and i can't access the Recovery menu (vol +/- home power buttons at start).
I've been reading all the meaningful threads here, tried doing button combination with battery, without and nothing seems to work.
Any and all help will be greatly appreciated.
Take it to samsung service senter if u got warranty and if isnt try to use another mini 2 battery but I think it may not work and try to press all butoms at same time for 2min and if nothing work buy or make a JTag
Sent from my GT-S6500D using xda app-developers app
go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot (ofc when samsung logo will appear don't hold keys). Try few times and it will work, if not 1st then another time. Do factory restet, reboot phone and take off battery. Turn on in download mode and install MD1 XEO stock and do again factory reset using trick from above (go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot.)
Worked...
brainscollector said:
go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot (ofc when samsung logo will appear don't hold keys). Try few times and it will work, if not 1st then another time. Do factory restet, reboot phone and take off battery. Turn on in download mode and install MD1 XEO stock and do again factory reset using trick from above (go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot.)
Click to expand...
Click to collapse
You sir... you are my new hero! key trick is pressing the recovery combination quick before logo appears and ... guess what i was holding the damn buttons so hard i was thinking they'd eventually lose pressure
My mini2 is alive :angel:
I'm glad to help you cheers
I have similar problem:
1. no recovery mode, only download mode
2. no matter what stock firmware I flash using odin I get bootloop
I tried the trick to go download mode > reject codition and then press the recovery mode combination but did not work
I wonder if there is a Cyanogen firmware in tar.md5 format so I can flash with odin ?
mihaivt said:
I have similar problem:
1. no recovery mode, only download mode
2. no matter what stock firmware I flash using odin I get bootloop
I tried the trick to go download mode > reject codition and then press the recovery mode combination but did not work
I wonder if there is a Cyanogen firmware in tar.md5 format so I can flash with odin ?
Click to expand...
Click to collapse
Did flash a incompatible kernel? Try flashing stock kernel, recovery adn ROM.

[Q] Help unbricking Samsung Galaxy Ace S5830

Hello everyone,
I've been using this community for a while, but this is my first post. One or two months ago I successfully rooted my Samsung Galaxy Ace S5830 and installed Imaginary ICS Final along with CWM Recovery 5.0.2.6. Everything worked fine but today I decided to update to a 4.4 custom rom. I installed CM 11 from this post http://forum.xda-developers.com/showthread.php?t=2659269, but after selecting my language a popup apeared which said "The setup aplication has stopped working", so I looked for another ROM. I found this one http://forum.xda-developers.com/showthread.php?t=2684893, but it required TWRP Recovery to be installed. I downloaded it, copied it to my SD and tried to install it form CWM 5.0.2.6.
Now, my phone goes into a blue screen whether I try to boot normally or into the recovery menu and I don't now how to solve it. Since I can boot into download mode, I've tried using Odin, but it doesn't recognize my phone. Can anyone help me, please? Thanks a lot in advance.
PS: I'm using Windows 8.1 x64.
EDIT: Now Odin recognizes it, but it gets stuck in "<1> setup connection...".
EDIT 2: I've solved it flashing through Odin with a PC running a clean installation of Windows 7.
de1mos said:
Hello everyone,
I've been using this community for a while, but this is my first post. One or two months ago I successfully rooted my Samsung Galaxy Ace S5830 and installed Imaginary ICS Final along with CWM Recovery 5.0.2.6. Everything worked fine but today I decided to update to a 4.4 custom rom. I installed CM 11 from this post http://forum.xda-developers.com/showthread.php?t=2659269, but after selecting my language a popup apeared which said "The setup aplication has stopped working", so I looked for another ROM. I found this one http://forum.xda-developers.com/showthread.php?t=2684893, but it required TWRP Recovery to be installed. I downloaded it, copied it to my SD and tried to install it form CWM 5.0.2.6.
Now, my phone goes into a blue screen whether I try to boot normally or into the recovery menu and I don't now how to solve it. Since I can boot into download mode, I've tried using Odin, but it doesn't recognize my phone. Can anyone help me, please? Thanks a lot in advance.
PS: I'm using Windows 8.1 x64.
EDIT: Now Odin recognizes it, but it gets stuck in "<1> setup connection...".
Click to expand...
Click to collapse
You usually get the "setup connection" error when you are in the Emergency Download Mode instead of Download Mode. You go to Emergency Download Mode by holding down Volume Up + Volume Down + Home Button + Power Button in which it loads a screen that says "Emergency Download Mode" and you go to Download mode by holding down Volume Down + Home Button + Power Button in which it does load the correct download screen with the yellowish message that say "Downloading…". Please make sure you are going to the Download Mode. Then try to flash again. Do post the result. Hope I Helped
Phone should detect in odin if you've Installed proper drivers for your phone.
Try this guide,
http://forum.xda-developers.com/showthread.php?t=2609021
Sent from my Galaxy Ace GT-S5830 using xda app-developers app
mahithm said:
You usually get the "setup connection" error when you are in the Emergency Download Mode instead of Download Mode. You go to Emergency Download Mode by holding down Volume Up + Volume Down + Home Button + Power Button in which it loads a screen that says "Emergency Download Mode" and you go to Download mode by holding down Volume Down + Home Button + Power Button in which it does load the correct download screen with the yellowish message that say "Downloading…". Please make sure you are going to the Download Mode. Then try to flash again. Do post the result. Hope I Helped
Click to expand...
Click to collapse
You're right, I was entering Emergency Download Mode (the one which says ARM9 mode). However, if I enter the normal download mode and plug my phone, Odin doesn't recognize it and Windows shows a message in the traybar which says "Can't recognize USB device".
brijeshep said:
Phone should detect in odin if you've Installed proper drivers for your phone.
Try this guide,
http://forum.xda-developers.com/showthread.php?t=2609021
Sent from my Galaxy Ace GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
I've followed it step by step and Odin still doesn't recognize my phone.
de1mos said:
You're right, I was entering Emergency Download Mode (the one which says ARM9 mode). However, if I enter the normal download mode and plug my phone, Odin doesn't recognize it and Windows shows a message in the traybar which says "Can't recognize USB device".
I've followed it step by step and Odin still doesn't recognize my phone.
Click to expand...
Click to collapse
Try this link on how to install stock rom using odin along with all firmwares. Go to the "Preparation" section where you will find all the necessary downloads including the drivers.
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Do post the result. Hope I Helped
Thanks a lot, but I've solved it flashing through Odin with a PC running a clean installation of Windows 7.
de1mos said:
Thanks a lot, but I've solved it flashing through Odin with a PC running a clean installation of Windows 7.
Click to expand...
Click to collapse
Glad to hear that buddy
try updating ur drivers online first, go to the download mode by pressing the vol up, down and the power button simultaneously, and then odin vud recognise it..
when u have successfully installed the stock rom from Odin, go to recoverymode, then to clockworkmod, remove cahe and dalvik data and then install the rom that u want.
This shud do as it worked for me..
Hit the "Thanks" button if it helped..
ShardulS. said:
try updating ur drivers online first, go to the download mode by pressing the vol up, down and the power button simultaneously, and then odin vud recognise it..
when u have successfully installed the stock rom from Odin, go to recoverymode, then to clockworkmod, remove cahe and dalvik data and then install the rom that u want.
This shud do as it worked for me..
Hit the "Thanks" button if it helped..
Click to expand...
Click to collapse
Bro, this question is solved. See "Edit 2" in the question where the author has specified what he did to solve this problem.

is that my phone hard bricked?

i have MINI 2 6500 . this is my mom phone. its have been rooted with cwm 6.0.4.4 , i dont know where the problem start but my phone cannot start and just vibrated.. booting up and after samsung logo its just restarted.. i tried to get into recouvery mode, but its dissapointed me.. nothing happened when i press UP KEY+HOME+POWER. i tried to get into download mode, its succesfull BUT, after 10 sec its automacally restart and vibrated again.. how to solve this problem.. PLEASE!!
What happened before this happened?
And is it on stock rom?
Don'T ForgeT TO PresS ThankS
Sent from my device GT-S5570I in my own words
Its stock rom and rooted..
After root did it boot?
Don'T ForgeT TO PresS ThankS
Sent from my device GT-S5570I in my own words
biso46 said:
After root did it boot?
Don'T ForgeT TO PresS ThankS
Sent from my device GT-S5570I in my own words
Click to expand...
Click to collapse
yeah.. its working fine for a year. but suddenly its just stuck like that..
Does your phone boots on recovery?
If yes, try to flash a custom rom.
If you don't want custom rom search for your country's stock rom and use odin to flash it.
Don'T ForgeT TO PresS ThankS
Sent from my device GT-S5570I in my own words
biso46 said:
Does your phone boots on recovery?
If yes, try to flash a custom rom.
If you don't want custom rom search for your country's stock rom and use odin to flash it.
Don'T ForgeT TO PresS ThankS
Sent from my device GT-S5570I in my own words
Click to expand...
Click to collapse
BRO.. i already explain my problem there.. can you read before answer .. NOTING HAPPENED WHEN I TRYING TO GET INTO RECOVERY MODE
Btw, recovery mode on your phone is with volume up + volume down + home + power !!!!!!
Sry for misreading before last post.
Btw= by the way
Don'T ForgeT TO PresS ThankS
Sent from my device GT-S5570I in my own words
You can read this post
http://forum.xda-developers.com/showthread.php?t=2707219
Maybe it help you.
Maybe you have to flash recovery again
blanxlr said:
Maybe you have to flash recovery again
Click to expand...
Click to collapse
i try flash the new recovery, but when i get into download mode its just only 10 second after that its restart.. i cant do anything anymore
Try just keep holding the keys to get into recovery for several loops, eventually it should go into recovery and then start getting stock rom flashed. If this doesn't work, try j-tagging (only last resort tho)
Current phone: rooted Samsung galaxy mini 2
Current rom: cm 11
Current recovery: CWM 6.0.4.7
Current tablet: unrooted Samsung galaxy tab 3, 8.0
Dont forget to press thanks if I helped ☺☺☺
berloss said:
You can read this post
http://forum.xda-developers.com/showthread.php?t=2707219
Maybe it help you.
Click to expand...
Click to collapse
Not help...
I use CM10.1 improved 07 / 07 build and CWM v5 , probably due to a weak battery and phone suddenly turn off and turn on again but what happens after that is constantly vibrating , black screen and the phone fails to boot . First I tried to remove the battery and put it back the phone turns on its own without pressing the power button , then just like the above , continuous vibration ...
I tried other things , removing all installed on the phone and silence for 1 day . Replacing the battery , try to enter download mode , recovery , could but after a few seconds that happens is the same.
One thing , when I try to press the power button continuously , the mobile phone can boot successfully , and I try to enter download mode and flash a stock rom by pressing the power button continuously until the process is completed but did not help .
My conclusion is that the power button problem , or it may damage the IC associated with it . Any suggestions ? please enlightenment , gan .. thanks
SOLUTION
I have the same bug. And I mean that when I try to enter in the recovery mode, nothing happens.
If you have the same error , please continue reading this , if not, do everything else.
To force the phone to boot into recovery, you should be able to enter , first, in the download mode.
Please flash before , clockworkmod recovery. (I recomend 6.0.3.3)
Before you have flashed cwm, go to download mode again.
At the first screen, you will see an warning message. Now is the time to press some keys... see bellow (TIP: please do not skip the message with the volume up key ! )
Press the home button + volume down + volume up (home+down+up)
Note: You need to press the up+down , and hold it at the same time with the phone vibration.
Release the keys on the samsung logo screen. If you see under the ,,samsung galaxy mini 2,, an logo with clockworkmod. The problem is solved.
If you see the RAMDUMP mode, instead the recovery, go there to see my solution > http://forum.xda-developers.com/showthread.php?t=2707219
IMPORTANT! > If you still see an black screen , instead samsung logo, please repeat all steps. It worked for me 100% after some long time.
He is trying to open recovery mode with vol up + home + power.
RECOVERY MODE IN GALAXY MINI 2 IS WITH VOL UP + VOL DOWN + HOME + POWER!!!!!!.
My friend has this mob btw.
----------------------------------------------------------------------------
Don'T ForgeT TO PresS ThankS
Sent from my device GT-S5570I in my own words
biso46 said:
RECOVERY MODE IN GALAXY MINI 2 IS WITH VOL UP + VOL DOWN + HOME + POWER!!!!!!
Click to expand...
Click to collapse
PLEASE READ WHAT I SAID BEFORE POST SOME WRONG THINGS !
I write a method to enter in recovery from download mode, when you can't acces it directly!
MaDaLiNoSt said:
PLEASE READ WHAT I SAID BEFORE POST SOME WRONG THINGS !
I write a method to enter in recovery from download mode, when you can't acces it directly!
Click to expand...
Click to collapse
He said that he tried to enter recovery with vol up + home + power without vol down.
AnY OF MY PostS ArE PosteD TO BE ThankeD NoT TO BE MonitoreD

Categories

Resources