Hi guys im after some help. Ive been running Darkys Rom 10.2 for a while on my SGS but it started crashing so i decided to do a factory restore, the issue is that now when it reboots i just get a screen of white static. I also have lost the recovery screen. The only screen i can access is the download screen.
Therefore i was after someone to point me in a direction of a stock rom that i can install via odin in order to just get the phone working again
Cheers Recard
Hey
You can flash 2.3.6 form the link below..
tchindalia said:
Hey
You can flash 2.3.6 form the link below..
Click to expand...
Click to collapse
Thanks chief all sorted!!
Related
ok hello guys i have an international version not the at and t anyways yesterday i used mobile odin pro and flashed to the new ics germany update it was very nice but then i went to a site called rootgalaxynote and installed a cm9 for the Chinese leaked ICS before installing it i backed it with CMW and then i went to recovery mode and installed the CM9 rom but when it was finished it started booting then booted again and again i tried to restore the CMW backup but at the end it said SYSTEM RESTORE FAILED ! tried flashing it withh pc odin but it gets stuck at nand write pleeeeease help pleeeease help i will do anything to fix my phone
Deademon said:
ok hello guys i have an international version not the at and t anyways yesterday i used mobile odin pro and flashed to the new ics germany update it was very nice but then i went to a site called rootgalaxynote and installed a cm9 for the Chinese leaked ICS before installing it i backed it with CMW and then i went to recovery mode and installed the CM9 rom but when it was finished it started booting then booted again and again i tried to restore the CMW backup but at the end it said SYSTEM RESTORE FAILED ! tried flashing it withh pc odin but it gets stuck at nand write pleeeeease help pleeeease help i will do anything to fix my phone
Click to expand...
Click to collapse
Can you access recovery? I am kind of in a similar situation but I have no access to recovery only download mode.
jwais said:
Can you access recovery? I am kind of in a similar situation but I have no access to recovery only download mode.
Click to expand...
Click to collapse
Op flashed Chinese leak...which has kernel known to brick phones
Note_E said:
Op flashed Chinese leak...which has kernel known to brick phones
Click to expand...
Click to collapse
i used to be able to enter recovery mode but now i went to a store to fix it and they tried to return it to the original samsung software in says AN ERROR OCCURRED WHLIE UPGRADING FIRMWARE what should i do ?
Deademon said:
i used to be able to enter recovery mode but now i went to a store to fix it and they tried to return it to the original samsung software in says AN ERROR OCCURRED WHLIE UPGRADING FIRMWARE what should i do ?
Click to expand...
Click to collapse
They borked your phone by doing that. Samsung repair. You can try pit file followed by stock gb buts its hit or miss
heimdel should help you. i dont have much time to explain. check how heimdell works. factory.rs and zimage file is enough to flash from heimdell rest leave them blank. take the good working base. you can also take the new PLY ics base. it should work
When im in recovery mode it keeps looping or restarting as i press up down or anything.
Im following this post. I flashed a stock rom then installed CWM to come to this problem. I have the international note.
Id be nice for any troubleshooting or tips for this issue
how about download mode? if you could, flash a stock gb rom via pc odin and start over.
Wouldnt that bring me back to where i was before?
It only happens after i instal CWM so perhaps im using an outdated kernal for CWM?
more like using an outdated CWM. Kernel shouldnt affect it.
You could just flash a kernel in ODIN, Something like speedmod, It will root and give working CWM, aswell as some cool kernel tweaks.
Its easier than flashing a whole firmware package
Wont flashing via odin give me the triangle?
Also how would i go around using it for this ROM?
It tells me to use abyss to do a full wipe...
Hey man ! How did you get on ? All sorted now i hope ?
Renren1403 said:
When im in recovery mode it keeps looping or restarting as i press up down or anything.
Im following this post. I flashed a stock rom then installed CWM to come to this problem. I have the international note.
Id be nice for any troubleshooting or tips for this issue
Click to expand...
Click to collapse
When you install CWM from dr.ketans link, I think that you have touch CWM, try using your fingers not hardware keys (vol up/down).
Thanks its working now i think . besides maps and K air not updating thank you everyone!
Hi guys :laugh: i'm new here... and i have a big problem: my galaxy note stays bricked on the initial logo (Samsung galaxy n7000) ..... i tried to flash with odin a stock gingerbread rom but it stucks at factory.fs
i tried to to flash it with cmw but it still stucks at the initial logo
i ve tried everything...... can you please help me?
p.s i can still enter in download mode odin
I think if u can search a thread where dr ketan has given expert advice
Also if u cud post how did u brick ur phone it will help experts in solving ur prblm
Edit see this http://forum.xda-developers.com/showthread.php?t=1912417
Sent from my GT-N7000 using xda premium
razorgtr14 said:
Hi guys :laugh: i'm new here... and i have a big problem: my galaxy note stays bricked on the initial logo (Samsung galaxy n7000) ..... i tried to flash with odin a stock gingerbread rom but it stucks at factory.fs
i tried to to flash it with cmw but it still stucks at the initial logo
i ve tried everything...... can you please help me?
p.s i can still enter in download mode odin
Click to expand...
Click to collapse
yeah ... as sitanshu91 asked,,,
u need to let us know what u did before it got stuck at the LOGO ?
razorgtr14 said:
Hi guys :laugh: i'm new here... and i have a big problem: my galaxy note stays bricked on the initial logo (Samsung galaxy n7000) ..... i tried to flash with odin a stock gingerbread rom but it stucks at factory.fs
i tried to to flash it with cmw but it still stucks at the initial logo
i ve tried everything...... can you please help me?
p.s i can still enter in download mode odin
Click to expand...
Click to collapse
Hi there, did you try to flash on an unsafe kernel? Please read the numerous posts on Safe / Unsafe kernels, then consult Chasmodo's excellent Kernel Repository.
Before flashing a ROM, I would suggest you download the Abyss 4.2 kernel (tar file), you can search and find this on XDA.
Connect your Note to Odin and flash the Abyss 4.2 tar file. This will install a safe (Gingerbread) kernel. Again there are posts on how to do this.
Enter Recovery and flash your ROM of choice.
Remember to ALWAYS flash on a safe kernel. If you are not sure, please check.
I hope this helps. Please hit THANKS if it did.
Thanks for posting you all,
I was flashing a new rom with cwm and suddently appeared an error: E: can't...
I took off the battery and put it again and reboot it again...
And so it stucked at the initial logo.
P.S: i had a cooked rom before that happened
razorgtr14 said:
Thanks for posting you all,
I was flashing a new rom with cwm and suddently appeared an error: E: can't...
I took off the battery and put it again and reboot it again...
And so it stucked at the initial logo.
P.S: i had a cooked rom before that happened
Click to expand...
Click to collapse
But, what new ROM were you flashing and what were you on prior? You have to explain yourself better. Did you do a factory reset/wipe data on a PURELY STOCK ROM or did you use philz kernel or a CM9/10 variant or something else?
razorgtr14 said:
Thanks for posting you all,
I was flashing a new rom with cwm and suddently appeared an error: E: can't...
I took off the battery and put it again and reboot it again...
And so it stucked at the initial logo.
P.S: i had a cooked rom before that happened
Click to expand...
Click to collapse
Sounds to me as if you flashed from an unsafe kernel. You must ALWAYS check the kernel is safe before you flash.
I would recommend you flash a safe kernel (via Recovery or Odin - there are guides on both methods). Abyss 4.2 is my personal choice.
Then, when the kernel has been flashed, reboot back to Recovery before flashing a ROM. Do not got straight to ROM flash.
These steps should help.
thanks for your help but there s still a problem... if a flash a rom with odin it stucks at factory.fs..
i did everything and at last i used the adb program and i removed the old partition like factory.fs and created new one..... after that i converted them in ext4 by going in (cwm recovery) mounts and storage and check format /data and format /system...
after that i installed the cm 9 Nightlies and the phone worked again =D
so...after that.... i installed odin mobile pro and Odin Flash Kernel for GT-N7000 ...then i downloaded a stock rom ics (N7000XXLRG_N7000DBTLRG_DBT) and i flashed it with odin mobiel pro =)
everything was working fine until it stopped at installing or updating (i don't know) the new applications like kies,Smemo ecc.....
and now i don't know what to do...
Can you help me please? i don't want to throw away a galaxy note......
razorgtr14 said:
thanks for your help but there s still a problem... if a flash a rom with odin it stucks at factory.fs..
i did everything and at last i used the adb program and i removed the old partition like factory.fs and created new one..... after that i converted them in ext4 by going in (cwm recovery) mounts and storage and check format /data and format /system...
after that i installed the cm 9 Nightlies and the phone worked again =D
so...after that.... i installed odin mobile pro and Odin Flash Kernel for GT-N7000 ...then i downloaded a stock rom ics (N7000XXLRG_N7000DBTLRG_DBT) and i flashed it with odin mobiel pro =)
everything was working fine until it stopped at installing or updating (i don't know) the new applications like kies,Smemo ecc.....
and now i don't know what to do...
Can you help me please? i don't want to throw away a galaxy note......
Click to expand...
Click to collapse
Flash back to cm base. If you have damaged emmc its likely you won't be able to run stock roms anymore because of the damaged space. ie. Stock rom 600-800mb, cm based 150mb
Sent from my GT-N7000 using xda premium
Thanks for your replay....
uau...so i can't use stock roms anymore.... but i can still flash other cooked roms like crash rom or king rom?
razorgtr14 said:
Thanks for your replay....
uau...so i can't use stock roms anymore.... but i can still flash other cooked roms like crash rom or king rom?
Click to expand...
Click to collapse
He is saying you can use any CM based ROM. Crash and such are still based on stock Samsung and pretty big in size. Maybe try something like SlimBean.
i have a rooted Galaxy Note N7000 with RocketRom v3 final by eybee. it has been smooth since then, but yesterday i have installed chainfire 3d on it. it says a warning that if i reboot it will stucked on reboot logo(maybe you have seen this for those who used chainfire3d already).
Now my phone got stucked up on boot logo. Please tell me what should i do? i have tried to repair it, i thought it was soft bricked, but i can't repair it anymore. any help please..thank you in advance..
What all have you done till now?
voidjov said:
i have a rooted Galaxy Note N7000 with RocketRom v3 final by eybee. it has been smooth since then, but yesterday i have installed chainfire 3d on it. it says a warning that if i reboot it will stucked on reboot logo(maybe you have seen this for those who used chainfire3d already).
Now my phone got stucked up on boot logo. Please tell me what should i do? i have tried to repair it, i thought it was soft bricked, but i can't repair it anymore. any help please..thank you in advance..
Click to expand...
Click to collapse
AFAIK, Chainfire 3D does not work on leaked JB roms..
nokiamodeln91 said:
What all have you done till now?
Click to expand...
Click to collapse
none until now. i really can't find any solution for this. please help me..
Shyam said:
AFAIK, Chainfire 3D does not work on leaked JB roms..
Click to expand...
Click to collapse
my bad.. but now i know. can someone help me resolve my problem?i can't use my phone..
voidjov said:
my bad.. but now i know. can someone help me resolve my problem?i can't use my phone..
Click to expand...
Click to collapse
Can you go into download mode?
And when yes: did you try to install a Stock Rom (with Odin on PC and download mode on your device)?
Find the thread by Dr Chetan who have provided all the procedure for going back to normal GB rooted rom...
Find his tool box too....
Sent from my GT-N7000 using xda premium
voidjov said:
none until now. i really can't find any solution for this. please help me..
Click to expand...
Click to collapse
if you can boot into recovery flash the Rocket Rom again using Wipes
ThaiDai said:
Can you go into download mode?
And when yes: did you try to install a Stock Rom (with Odin on PC and download mode on your device)?
Click to expand...
Click to collapse
yes i have done it already, but it shows FAIL on the upper left box when done.
voidjov said:
yes i have done it already, but it shows FAIL on the upper left box when done.
Click to expand...
Click to collapse
odin logs please
can you boot into recovery? did you try flashing the rocket rom again?
i have resolved it!!!
This may kindly serve as a reference to others. i did nothing, when i was so desperate and nothing seemed to work with my problem, i have tried to format the cache,system,preload,etc. on the recovery mode. then i installed the custom rom again and BOOM! now i can use my phone like it was never done to the latter stage hehe. by the way thanks to you all who posts their help, i have tried those too but at this time may desperation luckily works. thank you all!
may be next time before flashing anything using CWM, make a nandroid backup to revert back in case of disaster
Hello
I Flashed a rom on my galaxy s and it started bootloop , so i tried flashing a stock firmware downloaded from samfirmware but it still has the same problem , it wont start and goes on bootloop ! after flashing the stock rom it went into the recovery and there were some errors there like cant mount system etc.
What should i do now ? Please Help :|
Thanks in advance
xp3rto said:
Hello
I Flashed a rom on my galaxy s and it started bootloop , so i tried flashing a stock firmware downloaded from samfirmware but it still has the same problem , it wont start and goes on bootloop ! after flashing the stock rom it went into the recovery and there were some errors there like cant mount system etc.
What should i do now ? Please Help :|
Thanks in advance
Click to expand...
Click to collapse
This is for S plus but it shall work for you too: http://forum.xda-developers.com/showthread.php?t=1660596.
xp3rto said:
Hello
I Flashed a rom on my galaxy s and it started bootloop , so i tried flashing a stock firmware downloaded from samfirmware but it still has the same problem , it wont start and goes on bootloop ! after flashing the stock rom it went into the recovery and there were some errors there like cant mount system etc.
What should i do now ? Please Help :|
Thanks in advance
Click to expand...
Click to collapse
You Must Install Stock ROM ( 3 Files ) and when you install 3 files ROM , Every things Should be Ok.
xp3rto said:
Hello
I Flashed a rom on my galaxy s and it started bootloop , so i tried flashing a stock firmware downloaded from samfirmware but it still has the same problem , it wont start and goes on bootloop ! after flashing the stock rom it went into the recovery and there were some errors there like cant mount system etc.
What should i do now ? Please Help :|
Thanks in advance
Click to expand...
Click to collapse
Hey there,
Did you flash an ICS/JB rom first before trying to return to stock?
If you did, no worries, it can be easily fixed
I think what you're missing is a file called dbsdata.rfs.tar (I'm not quite sure where to find a link, will update if I see it)
Pretty much the data partition in ICS onwards is different to that of GB, and so therefore it'll cause your phone to bootloop if you have the incorrect data partition.
Download dbsdata.rfs.tar from somewhere and flash it in download mode through Odin.
Try that and please report back
(By the way, don't panic if it bootloops after installing a custom rom. Just take out the battery, go back into recovery and flash again.)
Sent from my GT-I9000