Google Now working on stock rooted OTA ICS on Droid 4! - Motorola Droid 4

New XDA contributor! Found a way to get Google Now to work on my stock rooted OTA ICS Droid 4. Used Droid RAZR bootstrap for ICS and it worked on my D4 flawlessly. Boot to recovery through the app and flashed the Mickey version 7 without issue...hope this helps! If not...you know what to do, admins....

Link please
Koragus said:
New XDA contributor! Found a way to get Google Now to work on my stock rooted OTA ICS Droid 4. Used Droid RAZR bootstrap for ICS and it worked on my D4 flawlessly. Boot to recovery through the app and flashed the Mickey version 7 without issue...hope this helps! If not...you know what to do, admins....
Click to expand...
Click to collapse
can you give a link?

Can't. Too newbie...disallowed. Found at RAZR forums....
Be strong and very Koragus!
....to those who know, keep your head up high...

Koragus said:
Can't. Too newbie...disallowed. Found at RAZR forums....
Click to expand...
Click to collapse
you can always cut and paste the url, then remove the http:// and replace the dots in the beginning of the url with spaces. for example - the link to this thread would be: forum xda-developers com/newreply.php?do=newreply&p=30651238

Thanks for the heads up! Here it is, then...
www razrforums com/forum/droid-razr-ics-development/1676-bootstrapper-ics.html
Be strong and very Koragus!
....to those who know, keep your head up high...

Koragus said:
New XDA contributor! Found a way to get Google Now to work on my stock rooted OTA ICS Droid 4. Used Droid RAZR bootstrap for ICS and it worked on my D4 flawlessly. Boot to recovery through the app and flashed the Mickey version 7 without issue...hope this helps! If not...you know what to do, admins....
Click to expand...
Click to collapse
Pretty noobish here...I've rooted my D4 and got the bootsrap and installed the apk, I reboot with it, but what do I do next? Step by step? Thanks.

Here's the thread link:
forum xda-developers com/showthread.php?p=29756226#post29756226
...download proper zip (I used version 7), reboot recovery, install zip from download location...hit install...
PM me if necessary...
Be strong and very Koragus, my ninja...

Koragus said:
Here's the thread link:
forum xda-developers com/showthread.php?p=29756226#post29756226
...download proper zip (I used version 7), reboot recovery, install zip from download location...hit install...
PM me if necessary...
Be strong and very Koragus, my ninja...
Click to expand...
Click to collapse
I saw the safestrap links and didn't know if I needed that but I got it! Just did as you said above, got the bootstrap apk, installed it, told it to bootstrap recovery then reboot to it and loaded the apk for mk7 google now rebooted and it works! yayyyy I've wanted this on my phone really bad for a long time and although D4 may not ever have JB this will suffice for now many thanks!

Congrats! Happy modding!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Koragus said:
Congrats! Happy modding!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Here's the link..
http://forum.xda-developers.com/showthread.php?p=29756226#post29756226

audinutt said:
Here's the link..
http://forum.xda-developers.com/showthread.php?p=29756226#post29756226
Click to expand...
Click to collapse
google now made my bluetooth act funky when trying voice commands, tried to use bootstrap to recover my backup and it failed on system.
I am now doing a fastboot restore
you have been warned.

I know the feeling...been through that with my Atrix, Bionics, RAZR, etc...thank God for the fast boot files! I'll grab those now...
Any additional details would be helpful. Did you try to flash the restore to stock file before trying to flash your back up? And did you use bootstrap to make the original back up or safestrap?
Thanks

Koragus said:
I know the feeling...been through that with my Atrix, Bionics, RAZR, etc...thank God for the fast boot files! I'll grab those now...
Any additional details would be helpful. Did you try to flash the restore to stock file before trying to flash your back up? And did you use bootstrap to make the original back up or safestrap?
Thanks
Click to expand...
Click to collapse
I made the backup with the razr bootstrap, tried to restore the backup, it failed on restoring system.
I restored data manually (advanced) then it would go to the red M screen, then a blank screen with the backlight on.
I tried booting into stock recovery and a factory reset, didn't work.
Fastboot did though
-Rich

I flashed the mikeyxda's version 7 online/offline with Safestrap to my safe system and it caused my safe system to boot loop. Unsafe system is working ok however.

robsharp78 said:
I flashed the mikeyxda's version 7 online/offline with Safestrap to my safe system and it caused my safe system to boot loop. Unsafe system is working ok however.
Click to expand...
Click to collapse
I flashed this to the unsafe...no problems encountered.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

audinutt said:
I made the backup with the razr bootstrap, tried to restore the backup, it failed on restoring system.
I restored data manually (advanced) then it would go to the red M screen, then a blank screen with the backlight on.
I tried booting into stock recovery and a factory reset, didn't work.
Fastboot did though
-Rich
Click to expand...
Click to collapse
But did you try flashing the stock zip in the same thread as the google now files? I would hope that file would have solved your problem without the need for rsd....
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

bootloop
Bootlooped me on safe partition on safe strap

Koragus said:
I flashed this to the unsafe...no problems encountered.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
How did you flash mikeyxda's version 7 online/offline to your stock unsafe ROM? Did you install a ROM to the safe side and flash that? When I attempt to flash a zip to the unsafe I get the warning that I cannot flash a .zip in unsafe mode.

aplus01 said:
How did you flash mikeyxda's version 7 online/offline to your stock unsafe ROM? Did you install a ROM to the safe side and flash that? When I attempt to flash a zip to the unsafe I get the warning that I cannot flash a .zip in unsafe mode.
Click to expand...
Click to collapse
He used bootstrap, not safestrap, a completely different recovery.

tcrews said:
He used bootstrap, not safestrap, a completely different recovery.
Click to expand...
Click to collapse
Yeah, I might have caused some confusion by saying "unsafe" . My apologies.
Sent from my Jellybean-ed Skyrocket using Tapatalk 2

Related

[RECOVERY] ClockWorkMOD 3.0.2.4 - 4/17/11 - i9020T & i9020A & i9023

We all know this is Koush's Work But Just Figured I Would Post It Up Here in case anyone needs it............
Thank you. Is there anyway to flash through Rom Manager
Sent from my Nexus S using Tapatalk
Zehlek said:
Thank you. Is there anyway to flash through Rom Manager
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
yea it should b the first option in the menu
aam6906 said:
yea it should b the first option in the menu
Click to expand...
Click to collapse
I flashed it, but now I am unable to boot into recovery. It takes me to the bootloader instead.
The only way I can get back into recovery is to flash and older version of CWM. Is anyone else having this issue?
Same problem here, with i9020.
i've a german nexus s (.23) it works very well!
RickROM said:
I flashed it, but now I am unable to boot into recovery. It takes me to the bootloader instead.
The only way I can get back into recovery is to flash and older version of CWM. Is anyone else having this issue?
Click to expand...
Click to collapse
I had that problem and I just flashed it a second time in rom manager and it works
Sent from my Nexus S using Tapatalk
Zehlek said:
I had that problem and I just flashed it a second time in rom manager and it works
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
I flashed it multiple times in ROM Manager, and I could never get it to work. I will try again later.
Fix permissions then reboot, I had the same issue and that fixed it
Sent from my Nexus S using XDA Premium App
Im having the same issue can't boot into recovery now
Where can we find the changelog?
Darrien13 said:
Im having the same issue can't boot into recovery now
Click to expand...
Click to collapse
I have the same proble. I have to flash back to CWM 3.0.0.0 to able to go to recovery mode. I'm not sure whether it's becuase I rooted my wiht this methode "Root & custom recovery WITHOUT oem unlock & wipe ".
Any suggestion? Or just stay with CMW 3.0.0.0?
You can try this one. In the same forum. http://forum.xda-developers.com/showthread.php?t=988686
yup it killed my recovery mode too. reverting back!
brrip said:
yup it killed my recovery mode too. reverting back!
Click to expand...
Click to collapse
It also killed my recovery.
This killed my recovery too. I did as Suprakarma suggested and all is well.
From within RomManager, run the fix permissions script.
(This had a problem on my device, it appears it doesn't like the BusyBox that Titanium Backup installed, so I had to install a new copy from the market).
Once that script's finished, reboot, then reinstall recovery from Rom Manager. Boot into recovery.
Hope that helps.
nop working i fix permition and flash recovery and stell same no working
Sent from my Nexus S using XDA Premium App
Just out of curiousity, can anyone confirm if this recovery works on the i9023 or i9020a?
Sent from my Nexus S using Tapatalk
I am back on 3.0.0.5 after trying to fix permissions. I will try again later.
we can always use an extra mirror
some times Koush website goes down for long period of times

Confused?

Okay right about now i am really confused about flashing roms on droid 3,
ok so i have root access now what recovery should i put?
and here is my big question.
can i flash dark droid or steel droid regardless of system?
my phone says .866 and droid steel says i need .890?
am confused on this part,
sorry for the stupid questions.
Yes you do need .890, and I recommend that you install the tweaked bp tools bootstrap by hashcode to get cwm, it saved my softbricked droid3
Sent from my DROID3 using XDA App
jojo4747 said:
Yes you do need .890, and I recommend that you install the tweaked bp tools bootstrap by hashcode to get cwm, it saved my softbricked droid3
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
Not gunna lie im a lil confused too..what's the point of flashing the tweaked one if when you flash a new rom it overwrites it? So you can't access cwr from bp tools then
/droid3
under settings, about phone, your system version is .866? i think we were .959 and now we're .890. Yes, you would want to use hashcodes modified version of koush's bootstrap.
beard0 said:
Not gunna lie im a lil confused too..what's the point of flashing the tweaked one if when you flash a new rom it overwrites it? So you can't access cwr from bp tools then
/droid3
Click to expand...
Click to collapse
Basically installed on your phone as an app, and you re-bootstrap/recovery after you flash your custom rom so you can create new backups/restore/flash update .zip files ect. After the rom is flashed as well... if you think you wont have any issues ever after, by all means, brave the world without your cwm recovery on there... but that kinda seems like you'd be sinking your d*** in looseness w/o a rubber... and no body likes that itch in the AM...
Sent from my DROID3 using Tapatalk
Seirÿu said:
Basically installed on your phone as an app, and you re-bootstrap/recovery after you flash your custom rom so you can create new backups/restore/flash update .zip files ect. After the rom is flashed as well... if you think you wont have any issues ever after, by all means, brave the world without your cwm recovery on there... but that kinda seems like you'd be sinking your d*** in looseness w/o a rubber... and no body likes that itch in the AM...
Sent from my DROID3 using Tapatalk
Click to expand...
Click to collapse
Not saying it wont be usefull but if you can manage to navigate to the bootstrap app and hit the button for bootstrap recovery..why can't you just hit the button for reboot recovery? I guess im just missing my unlucked bootloader from my incredible lol I used to screw with my phone so much lol
But why does no one wipe for any of these roms?
And what is safe strap exactly?
/droid3
IF you can access the app, yes you could just hit reboot recovery. If youre bootlooping or something you can go into recovery and select bp tools and that reboots into the same recovery as selecing reboot recovery in cwm. and the safestrap is different from the tweaked bootstrap. the safestrap boots from /preinstall or something. Also, you should wipe especially after switching to/from CM7
MrJudylicious said:
IF you can access the app, yes you could just hit reboot recovery. If youre bootlooping or something you can go into recovery and select bp tools and that reboots into the same recovery as selecing reboot recovery in cwm. and the safestrap is different from the tweaked bootstrap. the safestrap boots from /preinstall or something. Also, you should wipe especially after switching to/from CM7
Click to expand...
Click to collapse
This. ^^^
Basically you want it if you can't actually boot your phone.
if you don't redo your recovery and just rely on clicking those buttons when you need them from the app... you'll be stuck if you bootloop and have to flash the sbf in order to get your phone back. I much rather restore from recovery and have 99% of my phone data back with no issues.
The safestrap and 2nd Int. stuff is wicked cool, I just wish i knew more about that... I couldn't really help describe that part lol.

Two ROMS on one device

How can I install two ROMS (MavROM and ICS) on my D3? one in SAFE MODE and one without.
what programs to use?
I already have MAVROM installed with SAFESTRAP from hashcode, but if i disable it, i get the stock rom.
thank you.
You have to use a bootstrap to flash your nonsafe before you install safestrap
Sent from my XT860 using xda premium
can you direct me to a link to that application? all I can find is safestrap from hashcode.
i have this one: "Droid3CWBootstrap"
http://www.appbrain.com/app/droid-x-recovery-bootstrap/com.koushikdutta.droidx.bootstrap
but how can I install zip with it?
I'm sorry I didn't see your last PMs
Anyway.
1) Start in stock ROM http://forum.xda-developers.com/showthread.php?t=1336980
(Or your non-safe ROM in safestrap and then remove safestrap)
2) After root, download bootstrap (I uploaded it) http://www.mediafire.com/?3u8xhmsp3lg5yfx
3) Install the APK and open the bootstrap app. Press install recovery then reboot recovery. You're now in bootstrap, not from using vol -+ etc (from your PM)
4) Flash mavrom using their CWM Recovery instructions
5) Once you got it setup, remove bootstrap app and install safestrap http://goo.gl/1pr5T
6) Reboot into safestrap and switch to safe system. Make a backup if you want before swithing. The switch will backup your current ROM (data), which is mavrom. Once in safe-system you can now flash ICS using the instructions. This will flash ICS in a different place. When you go back to non-safe system your mavrom will be restored.
Hope it's clear now
thank you. sorry i "attacked" you with a lot of PMs. i tought you had enough
i will try it tomorrow.
bogdan_wrc said:
thank you. sorry i "attacked" you with a lot of PMs. i tought you had enough
i will try it tomorrow.
Click to expand...
Click to collapse
Np aside from the fact that I'm not on XDA all day the notification is very small - most of the time I don't see it until the next day
Will this method work with Liberty as well? I have never installed safestrap, but have bootstrap installed. I thought that I had read that safestrap does not work with Liberty ROM.
Sent from my DROID3 using XDA App
zzandrewst said:
Will this method work with Liberty as well? I have never installed safestrap, but have bootstrap installed. I thought that I had read that safestrap does not work with Liberty ROM.
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
Afaik hashcode fixed safestrap to work with all roms
Sent from my XT860 using xda premium
Endoroid said:
Afaik hashcode fixed safestrap to work with all roms
Sent from my XT860 using xda premium
Click to expand...
Click to collapse
Great! I will give it a try, basically I would just install safestrap and use Liberty as my non-safe and then flash cm7 for my safe right?
Sent from my DROID3 using XDA App
zzandrewst said:
Great! I will give it a try, basically I would just install safestrap and use Liberty as my non-safe and then flash cm7 for my safe right?
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
you can't flash nonsafe with safestrap. Gotta use a bootstrap to flash your nonsafe, then install safestrap for flash safesystem. But yes, i have liberty as my nonsafe and ics as my safe
Last time i tried to install MAVROM using CWM, i got the following error:
E:signature verification failed
when updating zip from card.
Installation aborted
what to do?
I dont have the INSTALL from zip option, just UPDATE from zip.
that why i used safestrap.
but if I want to install the boot animation from RAZR, now in which location shall I do that? it used to be in /system/media folder. still there?
thank you, i managed to install both one successfully.
bogdan_wrc said:
Last time i tried to install MAVROM using CWM, i got the following error:
E:signature verification failed
when updating zip from card.
Installation aborted
Click to expand...
Click to collapse
I think thats because you tried to flash using original recovery, you said something with -+ volume buttons?
Please be careful when doing this. While you "can" run 2 custom roms at once it is not what the safestrap system is designed for. Your non-safe rom should be stock and unaltered as it is what will save you from a fastboot flash should your safe rom go bad.
Sent from my HP Touchpad using Tapatalk.
calash said:
Please be careful when doing this. While you "can" run 2 custom roms at once it is not what the safestrap system is designed for. Your non-safe rom should be stock and unaltered as it is what will save you from a fastboot flash should your safe rom go bad.
Sent from my HP Touchpad using Tapatalk.
Click to expand...
Click to collapse
Well there's no reason to have the stock rom on non-safe "in case things go bad" because you can also just use "easy unbrick" which will put your phone back to stock just as fast as switching from safe to non safe.
As said before the only reason where this would be handy is when an official OTA is released, although i heard you need to uninstall safestrap for it to work
calash said:
Please be careful when doing this. While you "can" run 2 custom roms at once it is not what the safestrap system is designed for. Your non-safe rom should be stock and unaltered as it is what will save you from a fastboot flash should your safe rom go bad.
Sent from my HP Touchpad using Tapatalk.
Click to expand...
Click to collapse
Really a fastboot flash isn't such a big deal. I've done it more times than I can count. Takes 10 minutes. Id rather have my fav rom in nonsafe so I can use safe to testing new roms and new ics builds
Sent from my XT860 using xda premium
Is this dual boot system possible for my phone ? I would like to switch froyo and cynaogenmod !
Sent from my Optimus Me using XDA App
DoubleYouPee said:
Well there's no reason to have the stock rom on non-safe "in case things go bad" because you can also just use "easy unbrick" which will put your phone back to stock just as fast as switching from safe to non safe.
As said before the only reason where this would be handy is when an official OTA is released, although i heard you need to uninstall safestrap for it to work
Click to expand...
Click to collapse
I think you miss a key point. When you boot safestrap it starts in the non-safe system no matter what you do. Depending on your mode it then moves you to a totally separate partition on the device, preventing you from doing any harm to the boot rom.
The non-safe is key for the entire system to work. Yes it can be any rom, but you do put yourself at risk of losing two installs, including all the data.
Easy unbrick may be as fast to get to stock, but to rebuild back to where you were is going to take a lot longer.
In the end I am just advising caution, not telling people what to do. It does go against what the system was designed for and people should be aware of that before jumping off the ledge.
I understand, but now I have to go back to bootstrap to do essentially the same thing
Not sure if I follow you..
If you are only working in Safe-mode Rom the worst you can do is blow that rom up. Fixing it is just a matter of restoring your last backup via Safestrap recovery.
The problem with working in non-safe rom is that you can blow up both and lose your recovery. From that point you have to do Fastboot, install bootstrap, restore non-safe backup, install SafeStrap, restore Safemode backup.
Unless I am not understanding you correctly.

[How To] CWM Recovery

With the new boot loader unlock it comes time to use a recovery other than safe strap. The easiest way to flash a custom recovery, in this case, clockwordmod recovery, is to simply download ROM Manager and use it to flash the Motorola Photon Q version of CWM Recovery. I flashed it and booted into it and haven't experienced any problems as of yet so for those looking for a custom recovery straight out of the gate, this is for you.
Sent from my MB886 using xda premium
Nice i don't know if i should try it or wait for an official one for our device. In the mean time back to my nexus 4
Sent from my MB886 using xda premium
If you really want to give it a spin you can always flash the Photon Q version otherwise I'm sure there will be an official version ported soon
Sent from my MB886 using xda premium
Dumb question...... if I uninstall ss and install cwm will I lose the current ROM im using?
Sent from my MB886 using xda app-developers app
You'll have to reinstall yes.
Sent from my JokerMATRIX HD MAXX
Dumb question part 2..... uninstall ss first and then install cwm? Also erase all ROM slots before uninstalling? Thanks!
Sent from my MB886 using xda app-developers app
Yea make sure to erase the rom slots. I forgot to and uninstalled then was missing quite a bit of space lol.
Sent from my JokerMATRIX HD MAXX
I was thinking it might be a good idea lol. Thanks!
Sent from my MB886 using xda app-developers app
it actually works. lol
freshlycutlawn said:
With the new boot loader unlock it comes time to use a recovery other than safe strap. The easiest way to flash a custom recovery, in this case, clockwordmod recovery, is to simply download ROM Manager and use it to flash the Motorola Photon Q version of CWM Recovery. I flashed it and booted into it and haven't experienced any problems as of yet so for those looking for a custom recovery straight out of the gate, this is for you.
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
Have you flashed anything with it?
I haven't actually tried yet flashing a ROM but since I'm on stock and don't want to flash white yet I haven't had the opportunity, as long as its flashing to the device it should work with no problems
Sent from my MB886 using xda premium
freshlycutlawn said:
I haven't actually tried yet flashing a ROM but since I'm on stock and don't want to flash white yet I haven't had the opportunity, as long as its flashing to the device it should work with no problems
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
So far, i have installed the cwm for the photon q like you, and made a back up through it. Im going to see if it will restore from it as well. ill keep everyone updated.:good:
:edit: I sucessfully backed up my stock JB rom, wiped everything, and restored everything back and everythings perfect... I dont know what else to try before attempting to flash using the photon CWM. any ideas?
I uses the photon q recovery to backup & restore, and haven't had any issues yet. No ROM flashing for the time being, just haven't tried it yet.
Sent from my MB886 using xda premium
I Flashes AOSPizza and was getting a bootloop, had to start the phone in DB Mode from the Fastboot menu to get it to start up, charging my battery and will be restoring original at&t firmware as soon as possible....Dont need a brick just bought this!
I'm on aosp pizza but I reverted to the stock jelly bean system. Mounted system installed the aosp ROM the Mexico firmware was giving me hell except with cm 10
Sent from my Nexus 4 using xda app-developers app
DaveNavy said:
I Flashes AOSPizza and was getting a bootloop, had to start the phone in DB Mode from the Fastboot menu to get it to start up, charging my battery and will be restoring original at&t firmware as soon as possible....Dont need a brick just bought this!
Click to expand...
Click to collapse
Did you try to go back into CWM and wipe everything again after the boot loops? That sometimes helps when it is boot looping after an install.
bconcio said:
Did you try to go back into CWM and wipe everything again after the boot loops? That sometimes helps when it is boot looping after an install.
Click to expand...
Click to collapse
I tried the same thing with cm10, i tried 3 times and got bootloops on each, in the end, at least we know the back up and restore function works well.:good:
jbatacan said:
I tried the same thing with cm10, i tried 3 times and got bootloops on each, in the end, at least we know the back up and restore function works well.:good:
Click to expand...
Click to collapse
I'm Stock Again, Restart always sent me to fastboot with a failed flash error, I could back out of it to the pizza ROM each time however I don't want to depend on my phone booting incorrectly so I used RSD and I'm stock again, I'm going to give it another try tonight.
UPDATE...Reflashed everything started over and everything works PERFECT Yippie!!! I'm very pleased!!!!
Running AOSPizza and Loving it!
DaveNavy said:
I'm Stock Again, Restart always sent me to fastboot with a failed flash error, I could back out of it to the pizza ROM each time however I don't want to depend on my phone booting incorrectly so I used RSD and I'm stock again, I'm going to give it another try tonight.
UPDATE...Reflashed everything started over and everything works PERFECT Yippie!!! I'm very pleased!!!!
Running AOSPizza and Loving it!
Click to expand...
Click to collapse
So what was your full procedure? I want to try this and try to install CM10 later.
From what I read, you installed the Photon Q CWM, installed Pizza through that, got boot loops, flashed back to stock, then installed Pizza again?
bconcio said:
So what was your full procedure? I want to try this and try to install CM10 later.
From what I read, you installed the Photon Q CWM, installed Pizza through that, got boot loops, flashed back to stock, then installed Pizza again?
Click to expand...
Click to collapse
Fastboot was kicking errors and was boot looping into fastboot with firmware flash fail, I found however I could start into AOSPizza in DB mode (Safe Mode) , so I did that, charged up the phone 100% then used RSDLite and Reflashed Stock current firmware, it however does not re-lock the bootloader as some have mentioned might be the case in other post's, from there I started up the phone,turned on usb debug, used "motochopper" to root it, then installed Rom Manager from the market, flashed clockwork to device with the Photo Q CWM , copied AOSPixxaV1.zip ( The ROM ) and GappizzaV1.zip to the Phones internal storage not on the external SD memory card, from there went to clockwork mod on my atrix opened up the program and selected to reboot into recovery, went to the mounts and storage then select Mount System then go back then install zip from sd card then choose zip from sd card, then scroll to your rom and select it and it will flash when its complete you will go back and go to reboot system now, it will ask you if you want to bypass stock recovery on boot select it and your phone will reboot into AOSPizza......Have Fun!

[TWRP][RECOVERY] ODIN .TAR (2.7.1.0) for I9505G GE Galaxy S IV

Hey Everyone the folks over at TEAM WIN RECOVERY PROJECT put together an image file for TWRP recovery for the I9505G. I take NO CREDIT for this but I did convert the image into an ODIN flashable .TAR file because an ODIN tar was not available on TWRP website. I have tested and flashed this on my Locked Bootloader and Stock Google Edition Galaxy S IV running 4.2.2. Please make sure you Unlock the Bootloader if you want to Root your phone, the Root will not work if you try to install it from Recovery on reboot.
As Always I am not responsible if you brick your phone doing any modification
HOW TO INSTALL
Open up ODIN and click on PDA
Select Recovery.tar from the attachment you downloaded
Make sure ONLY "AUTO REBOOT" is checked
Click START
After you see the PASS on Odin and "Removed" Unplug
Power Off or Pull the battery
Use Volume Up and the Power till you see the SAMSUNG logo and let go of all. Wait for TWRP to boot, it took a little longer so your not stuck, just be patient.
8/30/2023 / 2.6.1.0
10/14/2013 / 2.6.3.0
07/21/2014 / 2.7.1.0
UPDATED TWRP IMAGES AND .TAR ODIN FILES http://techerrata.com/browse/twrp2/jgedlte
-----------------------------------------
KNOWN ISSUES For 2.6.0.0 & 2.6.1.0: 8/31/2023 ( post any help info on further releases ) UPDATE 7/21/2014 I have not been using the I9505G for awhile now so I am not sure of any issues or bugs on the latest releases please post them in the thread.
I have used TWRP from the Team Win site and the Odin package image I put together here and I have noticed and reported 2 bugs. The first is you can get stuck on TWRP screen booting into recovery, just pull the battery or reflash again until it boots up. The second is that when you restore sometimes you will get a FAIL immediately, don't panic, (1) reflash a ROM, and Restore or (2), pull battery and reboot back into recovery and Restore or (3) wipe and then Restore.
This build has some minor issues but if you follow this guide you will be OK.
Thanks to the Folks at TEAM WIN RECOVERY PROJECT and Chahk
MJ (attached file is for 2.6.0.0) PLEASE DO NOT USE ATTACHED RECOVERY PLEASE USE THE LINK ABOVE FOR OFFICIAL TWRP RECOVERY
MJHawaii said:
Hey Everyone the folks over at TEAM WIN RECOVERY PROJECT put together an image file for TWRP recovery for the I9505G. I take NO CREDIT for this but I did convert the image into an ODIN flashable .TAR file because an ODIN tar was not available on TWRP website. I have tested and flashed this on my Locked Bootloader and Stock Google Edition Galaxy S IV running 4.2.2. Please make sure you Unlock the Bootloader if you want to Root your phone, the Root will not work if you try to install it from Recovery on reboot.
As Always I am not responsible if you brick your phone doing any modification
HOW TO INSTALL
Open up ODIN and click on PDA
Select Recovery.tar from the attachment you downloaded
Make sure ONLY "AUTO REBOOT" is checked
Click START
After you see the PASS on Odin and "Removed" Unplug
Power Off or Pull the battery
Use Volume Up and the Power till you see the SAMSUNG logo and let go of all. Wait for TWRP to boot, it took a little longer so your not stuck, just be patient.
Thanks to the Folks at TEAM WIN RECOVERY PROJECT and Chahk
MJ
Click to expand...
Click to collapse
Thank you! Will try it out after work. Have you tried to perform a full nandroid backup?
---------- Post added at 11:48 AM ---------- Previous post was at 10:57 AM ----------
I just installed it via Goomanager app. =)
Sent from my GT-I9505G using xda premium
taney said:
Thank you! Will try it out after work. Have you tried to perform a full nandroid backup?
---------- Post added at 11:48 AM ---------- Previous post was at 10:57 AM ----------
I just installed it via Goomanager app. =)
Sent from my GT-I9505G using xda premium
Click to expand...
Click to collapse
I did not try to do a Nandroid this was the image from Team Wins website so I don't think you will have any backup issues like some did with the I9505 image. Goo Manager is always the best option but a .tar comes in handy at times that is the only reason I converted their image.
Sent from my GT-I9505G using Tapatalk 2
This is big news, but the lack of replies has me worried. I need more brave souls to flash before me.
BTW, did this trip your counter MJ?
Apologies if I am completely wrong - but does this mean that if I use this recovery my phone will be 100% identical to the official S4GE? I assume that would make a lot more stable and efficient than the current dumbs we have been leaked?
Thanks in advance!
ldjalal said:
Apologies if I am completely wrong - but does this mean that if I use this recovery my phone will be 100% identical to the official S4GE? I assume that would make a lot more stable and efficient than the current dumbs we have been leaked?
Thanks in advance!
Click to expand...
Click to collapse
From my understanding this is just a TWRP recovery. It's not something that will make your phone a stock S4GE because this is a custom recovery. It's a custom recovery for the S4GE GT-I9505G.
qnet said:
From my understanding this is just a TWRP recovery. It's not something that will make your phone a stock S4GE because this is a custom recovery. It's a custom recovery for the S4GE GT-I9505G.
Click to expand...
Click to collapse
Ohh OK, so this is just a TWRP recovery for an official S4GE? Thank you for clearing that up.
jpculp said:
This is big news, but the lack of replies has me worried. I need more brave souls to flash before me.
BTW, did this trip your counter MJ?
Click to expand...
Click to collapse
I put everything in the OP guys this is just recovery you can flash from Odin. I have tested and flashed this on my own I9505G this is NOT for the I9505
Sent from my GT-I9505G using Tapatalk 2
Flashing the .img with Heimdall is another option.
EDIT: http://forum.xda-developers.com/showthread.php?t=2370101
irishrally said:
Flashing the .img with Heimdall is another option.
EDIT: http://forum.xda-developers.com/showthread.php?t=2370101
Click to expand...
Click to collapse
Odin is easier for most Windows users because of its GUI, using standard USB drivers, and not having to mess around with Command Prompt.
Chahk said:
Odin is easier for most Windows users because of its GUI, using standard USB drivers, and not having to mess around with Command Prompt.
Click to expand...
Click to collapse
I agree Heimdal is great but most people prefer and use Odin
Sent from my GT-I9505G using Tapatalk 2
Can any one confirm this is working ?
Anyone can confirm this works ? (GT-I9505G)
(backup and restore works ?)
Thanks
imneo1 said:
Anyone can confirm this works ? (GT-I9505G)
(backup and restore works ?)
Thanks
Click to expand...
Click to collapse
Backups work I have not tried to restore though
MJHawaii said:
Backups work I have not tried to restore though
Click to expand...
Click to collapse
Full restore as well as partial work fine.
Chahk said:
Full restore as well as partial work fine.
Click to expand...
Click to collapse
Yep I did multiple backups, restore, and even flashing test zips upcoming ROMs for the I9505G. Make sure your following us in the GENERAL section here in Discussion I9505G there is a lot happening.
http://forum.xda-developers.com/showthread.php?t=2381339
Sent from my GT-I9505G using Tapatalk 2
Edit...done
Sent from my GT-I9505G using Tapatalk 2
MJHawaii said:
Edit...done
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
I have used odin to flash this TAR File and it passes but when I boot into my recovery it is still the stock recovery. My bootloader in unlocked but Secure Boot is Enabled. I think the secure boot may be why it is not flashing correctly. If so how to I disable secure boot?
jedinegotiator said:
I have used odin to flash this TAR File and it passes but when I boot into my recovery it is still the stock recovery. My bootloader in unlocked but Secure Boot is Enabled. I think the secure boot may be why it is not flashing correctly. If so how to I disable secure boot?
Click to expand...
Click to collapse
This is a known issue with TWRP even if you download the image directly. Keep rebooting to recovery it will work...eventually. I already submitted this to Team Win.
Sent from my GT-I9505G using Tapatalk 2
Updated guys 2.6.1.0 is out with new IMG and .tar files hopefully this new update fixes the freezing when we boot into TWRP I will be testing it.
Please report back on your experience.
Sent from my GT-I9505G using Tapatalk 2
MJHawaii said:
Updated guys 2.6.1.0 is out with new IMG and .tar files hopefully this new update fixes the freezing when we boot into TWRP I will be testing it.
Please report back on your experience.
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
If there is no difference between that .img and the one downloaded from goo.manager, Its freezing under advanced settings. Cant restore defaults. It froze on me trying to do a back up. Im sure there are several other issues as I have not had a chance to review the thread in general section yet, but just a few results from my own experience.
EDIT: I stand corrected, I thought I was getting freezes, I let it sit and it finally completed.

Categories

Resources