DarkTremor script - Galaxy Ace S5830 Q&A, Help & Troubleshooting

Hi,
Can someone tell me if the DarkTremor script is already included in these Roms : The SGSIII and the XperiaTized ?
Or need to flash this : http://forum.xda-developers.com/showthread.php?t=715940 ?
'Cause people tells me that i just have to tick "Dt auto start" in the "tweaks", but a2sd gui doesn't work : even if i've got the good settings, when i move my apps in the internal memory, the apps doesn't move on the second partition, but in the... internal memory ^^"
If someone can help me,
Thanks

I hope i can help u.
I think that DT script was not installed in those ROM.
Xperiatized is CM base ROM, so u just can use S2E instead of DT Script, its much easier.
But in SGS III, u can use DT Script, this is my step to apply DT:
1. Make sure u have a second partition in sd card.
2. Boot to cwm, remmember to MOUNT DATA, MOUNT SYSTEM
3. Then, flash DT Script
4. Reboot
5. Yes, u have to tick DT auto start
6. Install A2SD GUI move app to sd, move dalvik cache to SD
7. Finish.
Edit: I'm sorry, turn out xperiatized base on stock ROM
Hope i can help

Hi,
XperiaTized supports DarkTremor script ?
I'll follow your instructions =)
Thank you very much, you help me a lot !

I've got a problem : after flashing DarkTremor script and tick "DT : AutoStart" in Tweak, when i launch a2sd gui, the app tells me i have a version of DarkTremor behind 2.7.5.2, whereas i flashed the 2.7.5.3 ! ( http://forum.xda-developers.com/showthread.php?t=715940 )
I don't understand this time...
If u can help me,
Thanks

https://www.dropbox.com/sh/e22w3wr3h0bf9x0/NKL2GcnIP9
Download the tools from there..
And follow the steps above, its work for me..
Don't care Xperiatized support DT or not, just flash dt script, and it will work..

Which one i have to flash ?
Yesterday i flashed the second and that didn't work...
And, is it dangerous ? 'Cause i have already flashed DarkTremor script, so can i flashed it one more time ?
N.B. : I use the SGSIII Rom.
Thank you

Follow the steps i provide in post #2
Flash this dtapps2sd-2.7.5.3-beta04-signed.zip (DT Script)
U must install A2SD GUI to make it work..
Yeah, its not dangerous..
Remember to MOUNT SYSTEM AND DATA, if u forget to do it, the script will not work..
PS. I forgot it many times

But yesterday i flashed dtapps2sd-2.7.5.3-beta04-signed.zip ( with mount system and mount data before ) but when i open A2SD GUI, the app tells me that the version of the Darktremor script is under 2.7.5.2... So i could not use A2sd gui...
I'll try again,
Thank you

Do u use a2sd gui i provided in the link above?
If the problem still persist, i can't help u more.
Maybe we should wait other experts answer here.

Yeah i used this one
I tryed again, but the problem is not resolved
Anyway, i will flash an other Rom 'cause i don't like this one very much ^^'
Thank you for your help !

But do you know if XperiaTized V12 supports the DarkTremor Script ?

Related

[Guide] CM6 Installation with a2sd and swap

I was trying to upgrade to CM6 from CM5 and was facing lot of issues so I followed below process and got it worked. I thought of sharing it with everybody as lot of person are having issues.
I know most of the information is available on XDA but not on a single place.
I have made a separate thread because A2sd and SWAP are not supported by CM6 officially.
This is not an official method of installing CM6, this is how I got it worked and you can use it for reference.
1) Preperation: You need to get the below mention files, Please get these files from below mentioned thread:
a) CM6 and Gaaps
b) CustomMTD Patch - You only need FR-recovery and FR-boot latest version.
c) Script for a2sd and swap - get the latest script.
d) Fastboot - Fastboot should be setup and working, If you are on Linux go here
e) SD Card Partition - If you are not sure how to partition the sd card. If you want to use a2sd and swap, please partition your sd-card.​Store all files on root of sd-card.
2) Connect the phone to PC, do not mount the phone.
3) Wipe the phone:
a) Boot into recovery(reboot while holding home and power). Wipe everything.
b) Boot in fastboot mode. (reboot while holding back and power)
Enter the command in terminal or command prompt on the PC
fastboot erase system -w​ c) reboot into recovery.​
4) Install the custom MTD. (If you already have custom MTD then this step is not required.)
a) Flash customMTD fr-recovery file.
b) Reboot into recovery.​
5) Install CM6 Gapps and boot loader.
a) Flash CM6
b) Flash Gapps
c) Flash Boot Loader fr-boot file
d) reboot phone​
6) Once phone is booted and you are on the home screen, go to
CyanogenMod Settings > Application Settings > Install location - Set Install location as Internal, make sure allow application moving is not checked.
CyanogenMod Settings > Performance Settings - make sure that Compcache, JIT, dithering is not checked. If something is checked please uncheck it.
Lock home in memory can be checked, but some guys has reported that it drains a lot of battery.
Reboot the phone.
7) Go to terminal type below code
su
sh /sdcard/fr-patch140.txt a2sd​
It will ask if you want to install a2sd, type Y and press enter. Once APKManager is installed, type quit to exit.
Reboot the phone.
8) If you are not using a2sd and want to setup swap, please enter the below command in the terminal otherwise continue to step 9.
su
sh /sdcard/fr-patch140.txt sdext​
reboot the phone.
9) Go to terminal type below code
su
sh /sdcard/fr-patch140.txt swap​
It will ask for swappiness, I use 60 there, but its your own preference. After that it will ask you if you want to use swap-file, press n and enter.
After this enter below to terminal
Free​If you get swap setup it will show in front of swap in terminal, if the result show zero swap then reboot and do the step 9 again.
Now you have a CM6 with apps2sd and swap. All the newly installed apps will automatically go to ext.
If you don't like 3d gallery and want it to replace it with old gallery..This has been provided by ZilverZurfarn on CM6 thread.
Extract Gallery.apk from a older CM update (like 5.0.8) somewhere (c:\temp in the example below)
Using adb:
adb remount
adb shell rm /system/app/Gallery3D.apk
adb push c:\temp\Gallery.apk /system/app/Gallery.apk​
Also there are some apps which I don't prefer, as I don't use android native keyboard, Android browser, POP email, amazon MP3 etc. So I have created a script for my use which has been shared and it can be run from the terminal..
download remove-app-v1.0.txt and store it to root of your sd card. than enter below commands in terminal
su
sh /sdcard/remove-app-v1.0.txt​
currently this script will remove below mention apps based on user input.
Amazon MP3, Live Wallpaper picker, CM Wallpapers, POP Email, Android Native Browser, Android Native Onscreen Keyboard, Genie Widget...
Note: - Before removing browser and keyboard please make sure you have a replacement for them.
I do not take any credit for work, its just a reference for installing CM6. Thanks to Cyanogen and team, Firerat, Lbcoder for producing these amazing roms and methods.....
Please provide your feedback and suggestion for the guide.
If you like my guide and want to Donate
Can I have swap without app2sd?
I skipped the app2sd part, but the swap wouldn't work.
it didn't ask me about the swap file.
It ended with:
use
/system/bin/swappy on # to turn swap on
supa2001 said:
Can I have swap without app2sd?
I skipped the app2sd part, but the swap wouldn't work.
it didn't ask me about the swap file.
It ended with:
use
/system/bin/swappy on # to turn swap on
Click to expand...
Click to collapse
Yes, swap can be there without A2sd..
Do you have Fr-Patch139.txt script or any other version...could you please reboot and so the step 8 again
I did it many times
Do I need to create some files like userinit ?
Thanks for replying.
supa2001 said:
I did it many times
Do I need to create some files like userinit ?
Thanks for replying.
Click to expand...
Click to collapse
Try below command:
sh /sdcard/fr-patch139.txt sdext​
reboot the phone
sh /sdcard/fr-patch139.txt swap​
If this doesn't work, could you please pass on the message you are getting from the script.
G1sanju said:
Try below command:
sh /sdcard/fr-patch139.txt sdext​
reboot the phone
sh /sdcard/fr-patch139.txt swap​
If this doesn't work, could you please pass on the message you are getting from the script.
Click to expand...
Click to collapse
It works now. Thanks.
What does sdext do ?
When I ran sdext, it said "danger detected" though, is it still safe?
Same thing appeared when I did swap.
G1sanju said:
I was trying to upgrade to CM6 from CM5 and was facing lot of issues so I followed below process and got it worked. I thought of sharing it with everybody as lot of person are having issues.
I know most of the information is available on XDA but not on a single place.
I have made a separate thread because A2sd and SWAP are not supported by CM6 officially.
This is not an official method of installing CM6, this is how I got it worked and you can use it for reference.
1) Preperation: You need to get the below mention files, Please get these files from below mentioned thread:
a) CM6 and Gaaps
b) CustomMTD Patch - You only need FR-recovery and FR-boot latest version.
c) Script for a2sd and swap - get the latest script.
d) Fastboot - Fastboot should be setup and working, If you are on Linux go here
d) SD Card Partition - If you are not sure how to partition the sd card. If you want to use a2sd and swap, please partition your sd-card.​Store all files on root of sd-card.
2) Connect the phone to PC, do not mount the phone.
3) Wipe the phone:
a) Boot into recovery(reboot while holding home and power). Wipe everything.
b) Boot in fastboot mode. (reboot while holding back and power)
Enter the command in terminal or command prompt on the PC
fastboot erase system -w​ c) reboot into recovery.​
4) Install the custom MTD. (If you already have custom MTD then this step is not required.)
a) Flash customMTD fr-recovery file.
b) Reboot into recovery.​
5) Install CM6 Gapps and boot loader.
a) Flash CM6
b) Flash Gapps
c) Flash Boot Loader fr-boot file
d) reboot phone​
6) Once phone is booted and you are on the home screen, go to
CyanogenMod Settings > Application Settings > Install location - Set Install location as Internal, make sure allow application moving is not checked.
CyanogenMod Settings > Performance Settings - make sure that Compcache, JIT, dithering is not checked. If something is checked please uncheck it.
Lock home in memory can be checked, but some guys has reported that it drains a lot of battery.
Reboot the phone.
7) Go to terminal type below code
su
sh /sdcard/fr-patch139.txt a2sd​
It will ask if you want to install a2sd, type Y and press enter. Once APKManager is installed, type quit to exit.
Reboot the phone.
8) Go to terminal type below code
su
sh /sdcard/fr-patch139.txt swap​
It will ask for swappiness, I use 60 there, but its your own preference. After that it will ask you if you want to use swap-file, press n and enter.
After this enter below to terminal
Free​If you get swap setup it will show in front of swap in terminal, if the result show zero swap then reboot and do the step 8 again.
Now you have a CM6 with apps2sd and swap. All the newly installed apps will automatically go to ext.
If you don't like 3d gallery and want it to replace it with old gallery..This has been provided by ZilverZurfarn on CM6 thread.
Extract Gallery.apk from a older CM update (like 5.0.8) somewhere (c:\temp in the example below)
Using adb:
adb remount
adb shell rm /system/app/Gallery3D.apk
adb push c:\temp\Gallery.apk /system/app/Gallery.apk​I do not take any credit for work, its just a reference for installing CM6. Thanks to Cyanogen and team, Firerat for producing these amazing roms and methods.....
Please provide your feedback and suggestion for the guide.
Click to expand...
Click to collapse
Thanks mate this will really help me to put my apps on SDcard..as past days m really trying to get my phone memory safe...
supa2001 said:
It works now. Thanks.
What does sdext do ?
When I ran sdext, it said "danger detected" though, is it still safe?
Same thing appeared when I did swap.
Click to expand...
Click to collapse
"danger detected" message is for SPL, It checks for the SPL first and you have danger spl installed.
By default CM6 does not mount ext partition as it does not support a2sd right now. sdext creates a mount point for ext partition. a2sd internally does that but as you are not using a2sd this was not done.
vermaekansh said:
Thanks mate this will really help me to put my apps on SDcard..as past days m really trying to get my phone memory safe...
Click to expand...
Click to collapse
Thanks, If you use this guide then please provide your feedback and suggestion towards it.
Sorry, but is there a script to disable swap? I am gonna do some test to see what works best.
Thanks.
supa2001 said:
Sorry, but is there a script to disable swap? I am gonna do some test to see what works best.
Thanks.
Click to expand...
Click to collapse
In the terminal
sh /sdcard/fr-patch139.txt rev swap​
this will turn the swap off.
Watch out...newbie in the room
Okay, you are going to love this.... I'm sorry if this is too long but I hope you can help a newbie trying to learn this stuff!
I am REALLY new to all this, and did a Root and Rom Update as the Unlockr.com videos taught me, to get CM6. And then also added the gapps file because I read a thread that that was needed to get gmail and the market on my phone. Once rebooted, everything worked ok but slow. Then I noticed that my gmail wasn't syncing, and then it started to force close. So I did a wipe and loaded CM5 because I saw on a thread that that was faster for the G1. With all of this, after reading your thread and suggestion, I am wondering...
1. Is CM6 slow for you?
2. Should I have loaded gapps? IS that how to get gmail and should it sync automatically? If not, is there a way to make it?
3. Should I stick with CM5 or try CM6 following these suggestions??
And big ones.... I wish there was a website somewhere with definitions to all the terms and apps used. Lol.. I Google all of them but don't always find anything that actually describes what they are.
Swap and app2sd were mentioned on the video instructions for loading a new ROM but do they automatically come in the ROM zip files? Because in the video they didn't load them separately. They partition the card "for" them, but don't show installing them. Obviously I assume App2sd is a program to store your apps on your sd card. Is this something that I SHOULD install? Is swap something I should install?
And what is a CustomMTD Patch? Annnnnnd, what is fastboot??
I know this is a lot of questions... I decided to ask them all here because they pertain to this thread because I'm wondering if I should do this...
Thanks for any and all answers!
I would assume that you have a G1, and my answer is based on that assumption. If you have different phone let me know.
1. Is CM6 slow for you?
If I don't use a2sd and swap, answer is yes. I install lot of apps, with cutomMTD it works fine in starts but slows down after some time. With a2sd and swap it is worth a try.​
2. Should I have loaded gapps? IS that how to get gmail and should it sync automatically? If not, is there a way to make it?
CM roms does not distribute google apps with the rom as its not legal. So if you want gapps then yes that file has to be flashed. CM6 can be run without gapps, but you won't get gmail, market etc..once you have gmail it should sync automatically.​
3. Should I stick with CM5 or try CM6 following these suggestions??
CM5 is quite stable rom and runs fine. Choice is yours...CM6 is in initial stages, but is good too...I go with CM5 for my daily driver as a2sd is not officially supported. It will be there in CM6.1....​
And what is a CustomMTD Patch? Annnnnnd, what is fastboot??
G1 was build with a low memory and the way internal memory has been partition todays rom can't fit into it. That's why dangerSPL, but there is a risk involved in installing dangerSPL. If you don't follow the instruction you can brick your phone. CustomMTD is a safe method. This increase the size of data partition so you can install more apps internally. link for that thread is in first post.​
a2sd is a way to store apps on sdcard, sdcard needs to be partitioned to support that..step 1 - e in my guide. That's a manual way of doing it. If you have AmanRA recovery then it will have a menu option for that. Most of the rom supports it automatically, so if you have sd card partition then rom will automatically do that.
CM6 does not support a2sd so it has to done in different way. CM5 supports it but in settings - application - a2sd has to be checked on to move your apps to sdcard.​
Swap is kind of extra memory to help running the applications. if you run multiple application together then you need swap on CM5 and CM6.​
G1sanju said:
CM5 is quite stable rom and runs fine. Choice is yours...CM6 is in initial stages, but is good too...I go with CM5 for my daily driver as a2sd is not officially supported. It will be there in CM6.1....​
Click to expand...
Click to collapse
So when CM6.1 is comming out for G1..do you have nay idea about HCTCLAY's ROM over CM6
vermaekansh said:
So when CM6.1 is comming out for G1..do you have nay idea about HCTCLAY's ROM over CM6
Click to expand...
Click to collapse
Nope I don't follow htcclay but it is based on CM so should be updated
Sent from my HTC Dream using XDA App
G1sanju said:
Nope I don't follow htcclay but it is based on CM so should be updated
Sent from my HTC Dream using XDA App
Click to expand...
Click to collapse
No hard feeling for CM but for me htcclay's ROM's are more stable than CM's.....any release date for CM6.1 for G1?
vermaekansh said:
No hard feeling for CM but for me htcclay's ROM's are more stable than CM's.....any release date for CM6.1 for G1?
Click to expand...
Click to collapse
Roms are personal preferences, I also tried lot of roms before settling on CM... and for CM there are no eta it will be released when it's done...
Sent from my HTC Dream using XDA App
WOW!
THANK YOU!!! You are awesome for going through all of those!
Yes, it is a G1.
Are there any features in CM6 that aren't in CM5, or is it faster than CM5 with the ap2sd & swap?
I believe I partitioned the sd card when I loaded the CM6 ROM.
So I'd like to try the CM6 with the ap2sd, swap and the CustomMTD. I do have the AmanRA recovery, but not sure about how to select the ap2sd.
Any chance you would tell me how to get the ap2sd, swap and CustomMTD on the phone if I have already Flashed CM6 on there?
Thanks again, regardless. The info you gave me helped me learn a little more. I'm still a bit confused about what fastboot is though. But I will just keep at it and keep learning!
Are there any features in CM6 that aren't in CM5, or is it faster than CM5 with the ap2sd & swap?
CM6 is based on froyo, latest version of android...its good and yes speed is comparable. Also CM has added new stuff in it, like fully customizable power bar and other stuff...Full changelog is there in CM6 thread.​
I believe I partitioned the sd card when I loaded the CM6 ROM.
So I'd like to try the CM6 with the ap2sd, swap and the CustomMTD. I do have the AmanRA recovery, but not sure about how to select the ap2sd.
For CM6 a2sd is through script, instruction is in first post. I have included customMTD also there. So if you follow the guide, you will be having customMTD, a2sd and swap...swap require an partition on your sdcard, if you don't have that partition then it will ask for swap file.​
Any chance you would tell me how to get the ap2sd, swap and CustomMTD on the phone if I have already Flashed CM6 on there?
you can wipe and start over again, first post should be good for you.​
Thanks again, regardless. The info you gave me helped me learn a little more. I'm still a bit confused about what fastboot is though. But I will just keep at it and keep learning!
Oh I forgot about the fastboot, fastboot and adb are tool, which give an option to control, flash and do other thing on the phone from PC. The link for setup guide is in first post.​
Thanks again!!
Man! You are great! Thanks again for all your help! Now let's see if I can manage to follow your thread and not brick my phone! Lol
Until next time....

[ROM][19 Sep]VIBES v1.6|Rooted|App2SD|Wifi-Tether|RAM Optimized|Fast|Updatable

Important Notice Due to my exams i wont be available till 25th. I have tried to make instructions as clear as possible still if anyone is having problems u can use 1.2, 1.2.1, 1.5, 1.5.1 all stable.1.5 and 1.2.1 have most positive feedbacks.
Or Go for my SUPER STABLE and Successful FROYO (android 2.2.1)build HERE :: CLICK HERE
Dear friends ..
You need a rooted wildfire for this...
Thanks frnds for ur interest and testing support ::
HIGHLY RECOMMENDED I can't say it enough be it this or any other ROM, Always Back-up your current stable ROM with Nandroid.
IMP IMP IMP::Please format your SD card to FAT32 before flashing and remove all partitioning.This way you wont have Boot Loop Trouble.
To Flash the zip file needs to be copied to root of ur Sd card and flashed from recovery.
You can also use Koush's Fake Flash.
This ROM wont delete ur personal data from your sd card.
Its better to Wipe ur Caches from recovery menu before flashing. Recommended.
DOWNLOAD the ROM.Complete Following steps.Same steps for all ROMs here.
# Flash the ROM and Make the first boot (will take little time).
# Reboot Once. Now Boot into RECOVERY..and complete following Steps::
HOW TO SET UP SD CARD FOR APP2SD to work properly​A. backup your sd card to your computer, as partitioning will wipe the entire card.(Just to be super safe::Format your card to FAT32 on your PC and then insert it into ur Buzz/Wildfire)
B. Reboot into recovery
c. Select partition sdcard
d. Again select partition sd card.
e. Follow the instructions on the phone to partition your sd card. You can optionally set a swap file while you are partitioning your sd card.
Recommended setting (Swap=0, Ext=256, rest=fat32)
F. In the partition sdcard menu, select sd:ext2 to ext3. Follow the instructions on the screen.
G. ONLY FOR Vibes v1.1 Others skip this step nly perform this step if you want ext4 and your rom supports it: in the partition sdcard menu, select sd:ext3 to ext4. Follow the instructions on the sdcard.​H. Press the up volume button on the phone to go back to the main menu.
I. Reboot and viola you are done.
Or Do it THE GEEK WAY
Click to expand...
Click to collapse
LOTS of partitioning trouble causes phone to have boot trouble.
1. Please before flashing remove your partitions you had created earlier.
2. Then Format to FAT32.
Its just partitioning problem i have checked the ROM friends once u partition ur card..then formatting will clean only one partition other is still unusable you have to remove partion. then Format to Fat32 and boot.
HERE ARE SOME INSTRUCTIONS AND A TOOL that will solve ur problems once and for all..
and after this partition removal, ur card is fat32 again ..this time just create a partition with recommended setting (swap=0 and ext=256)..try ext2 first.
Click to expand...
Click to collapse
Vibes v1.6 Released GET IT HERE
# APN/Mobile network Fixed
# Market Patched - u can see apps u could not earlier.
# App2Sd improved and better.
# Advanced Task Killer
# AndroZip, TuneIn Radio added.
# Google Maps fixed and better. Navigation now works even outside US.Cache on SD.
# ROMmanager.
# PowerBoot Menu-Reboot, Recovery, Bootloader, WipeData, Shutdown and Schedule Reboots.
# Wireless Tether.
# A small surprise.
Vibes v1.5.1:: Don't have many feedbacks but up for Vibes v1.5 :: Download
Vibes v1.5 was reported to be stable:: Link Updated:lease format ur sd Card to Fat32 befor flashing and remove Partition.
v1.2.1 (With App2SD) GET IT HERE... For those who want to have a stable working ROM as back up before flashing various other Roms.
v 1.2 (Without App2SD) GET IT HERE.
# Everything same as v1.1 -minus the problems and some cosmetic changes.
# app2sd removed - not many need it.
v1.1 with a new Kernel here. Reported Working well
EDit: Do report Errors and problems friends coz thats when a rom can be improved.
For boot Loop TRY THIS..
v0.9
Edit: almost everything working except soundhound and terminal apps which can be uninstalled..
My Sincere thanks to early testers
adeadrat
leegreggs
rolks
747 Driver
johi69
QAD3R Tested v1.6 See his post.
Click to expand...
Click to collapse
For customizations and probable errors :
> For your FONT Tweaking and Changing needs GO HERE. and HERE.
> If you have market problems try flashing this just like Rom..Market FIX
LOG is HERE​
> Google Maps update error is Google Problem. Get This MOD
It also Enables worldwide Navigation using google maps.
Caches on SD so memory is saved and should enable multitouch. Read about it.
Rom is clean..Goodies can be added from market.
Usual warning.. your device is your responsibility..
TO DO:::
1>>If all works well will try to make weather animations working for home screen...
2>>Many more but 1>> is top priority if all goes well.
Special Add On Packages::
Adblock toggle on:: prevents those annoying ads from being displayed.
Adblock toggle off:: Get those ads back.
Just flash these files like rom and Done.
hi......seems rather intresting .....
leegreggs said:
hi......seems rather intresting .....
Click to expand...
Click to collapse
well the one who tests this will tell..
will flash it and see if it is stable
leegreggs said:
will flash it and see if it is stable
Click to expand...
Click to collapse
Awesome thanks mate link will be up in 18 minutes.. Thanks mate post ur findings..
will do......
also have a go at doing my own rom too
could try it out too.. have my phone in clockwork recovery just waiting to flash something fun -_-
leegreggs said:
will do......
also have a go at doing my own rom too
Click to expand...
Click to collapse
HEY WISH U ALL THE BEST..LINK is up now..
adeadrat said:
could try it out too.. have my phone in clockwork recovery just waiting to flash something fun -_-
Click to expand...
Click to collapse
Thanks Mate awesome..LINK is up now..
cheers mate ....will give it a go and get back and keep you informed to how it acts
Boots up just fine got some errors in the logcat but evrythings seems to work will keep using this until I keep working on my own ROM or CM6 is out
logcat if you want it: http://pastebin.com/9hQ7dEsb
clean install....no errors of yet, only soundhoud f.c
will keep you informed
adeadrat said:
Boots up just fine got some errors in the logcat but evrythings seems to work will keep using this until I keep working on my own ROM or CM6 is out
logcat if you want it: http://pastebin.com/9hQ7dEsb
Click to expand...
Click to collapse
Awesome dude thanks for the info..most of all Lovely for the logcat.. will see what can be done..
Now will work to remove errors and will post one with some good modifications soon.. God bless ya ..
Thanks again..
leegreggs said:
clean install....no errors of yet, only soundhoud f.c
will keep you informed
Click to expand...
Click to collapse
Thanks dude... ok will get a newer version of soundhound and see..
Awesome dude lovely for the info....
altight dude....
just noticed when trying to up date apps i.e google maps, superuser etc , it comes back as cannot install .......
not a big problem but just thought id give you the feedback mate
leegreggs said:
altight dude....
just noticed when trying to up date apps i.e google maps, superuser etc , it comes back as cannot install .......
not a big problem but just thought id give you the feedback mate
Click to expand...
Click to collapse
perhaps Flashing this ZIP file can help.. flash it like a rom
GET IT HERE
cheers mate , shall let you know.....rom seems speedy ....good work
leegreggs said:
cheers mate , shall let you know.....rom seems speedy ....good work
Click to expand...
Click to collapse
Thanx mate now working to make it better.. EDIT its 2:30 am here ..friends got to sleep.. sorry if u have any trouble and i am not able to help but i will be back online in 7 hrs see ya all then..
will try, post comments later
leegreggs said:
cheers mate , shall let you know.....rom seems speedy ....good work
Click to expand...
Click to collapse
i hope that the market problem is solved for you . if yes then i will include it in my new update .. that is coming soon..
will test it later

[Q] latest MIUI vs EXT2 partition and A2SD, problem

Hi!
Quick question to everybody. Recently I've installed MIUI 1.5.20 on my MM, before that parted SD into FAT32(7GB, primaty+active)+EXT2(1GB, primary). Now in Settings>System>SD, in section A2SD+ it says "This device does not support A2SD+", is there something more that I should have done to make it work properly?
DrNO[PL] said:
Hi!
Quick question to everybody. Recently I've installed MIUI 1.5.20 on my MM, before that parted SD into FAT32(7GB, primaty+active)+EXT2(1GB, primary). Now in Settings>System>SD, in section A2SD+ it says "This device does not support A2SD+", is there something more that I should have done to make it work properly?
Click to expand...
Click to collapse
Nothing is wrong with it as far as I know. I had the same "issue" as well and my ext2 partition worked fine. I think it might just be because of the ext2 partition not being a native feature to the Milestone? Everything is fine though, don't worry
ok... so how can I check if it works? afaik it should hold apps relocated to SD, so if i go via root explorer to sd-ext folder (mount point), .apks should be there, right?
DrNO[PL] said:
ok... so how can I check if it works? afaik it should hold apps relocated to SD, so if i go via root explorer to sd-ext folder (mount point), .apks should be there, right?
Click to expand...
Click to collapse
Yes. Also you can try looking at /system/app and it might be there as well.
thx a 1M going to try it out... after reflashing with own-modified version from a scratch :]
unfortunately, /sd-ext is still empty.
ok, can any one tell me what are the correct steps, am I missing something? here is what i did:
1. factory reset (org froyo)
2. partitioned SD:
a) FAT32 7GB primary active
b) EXT2 1GB primary
3. rsd lite > g.o.t. 2.2.1 + open recovery 1.46 + or-extfs-update2 + V6supercharge
4. full wipe
5. applied miui 1.5.20 + minor fixes
should it work already(?)
DrNO[PL] said:
unfortunately, /sd-ext is still empty.
ok, can any one tell me what are the correct steps, am I missing something? here is what i did:
1. factory reset (org froyo)
2. partitioned SD:
a) FAT32 7GB primary active
b) EXT2 1GB primary
3. rsd lite > g.o.t. 2.2.1 + open recovery 1.46 + or-extfs-update2 + V6supercharge
4. full wipe
5. applied miui 1.5.20 + minor fixes
should it work already(?)
Click to expand...
Click to collapse
Which MIUI are you using? Did you try rebooting the phone after you restored all your apps?
PROBLEM SOLVED
it's latest MIUI 1.5.20, solution as follows:
1. after installing MIUI, flash via AOR >>THIS script
2. reboot device to the OS and instal (from market) "A2SDGUI"
3. reboot device (just to be sure)
4. njoy
later in mentioned app, you can set dalvik location and/or initiate swap
(@Admins/Mods: for me thread to be closed, thx)
thanks goes to skwara for advice, tkirton for script and skadude66 for trying to help
DrNO[PL] said:
PROBLEM SOLVED
it's latest MIUI 1.5.20, solution as follows:
1. after installing MIUI, flash via AOR >>THIS script
2. reboot device to the OS and instal (from market) "A2SDGUI"
3. reboot device (just to be sure)
4. njoy
later in mentioned app, you can set dalvik location and/or initiate swap
(@Admins/Mods: for me thread to be closed, thx)
thanks goes to skwara for advice, tkirton for script and skadude66 for trying to help
Click to expand...
Click to collapse
Glad it works I'm guessing when you say latest 1.5.20, you're talking about miuiandroid.com's version of MIUI? Because eybee1970's version includes automatic app2ext scripts and shouldn't be that hard to use.
right... you asked about whose release is it, it's not quite original, but based on it. skwara@android.com.pl makes PL version better suited to our local demands, there's no preinstalled app2ext. maybe that's even better, rom is lighter, and more open to your own way of customisation ;P hope someone will find this thread useful if he/she is not using eybee1970's version

[ROM] NeoFroyo V0.1 for Xperia X1 [17-08-2011]

Initial Release V0.1:
This ROM is english only and has several tweaks inbuilt. Try it out yourself and you will be amazed of the overall speed. Maybe I will support more languages later (have to talk to Infinimint about this -> maybe he has enough CPU power and time + nerves to compile it in each language). Till then if you are searching for another language then move elsewhere to find your ROM...
you can find more informations here: http://www.neopeek.com/viewtopic.php?f=14&t=7524
**************************************
* Installing instructions :
1- Format SDcard To 4 Partitions :
- 1- partition: FAT32 (SDcard / Rest)
- 2- partition: EXT2 (System / about 250 MB )
- 3- partition: EXT2 (Data / about 450 MB)
- 4- partition: EXT2 (Cache / about 100 MB)
* Make sure That all partitions are set PRIMARY ..
***********************************************************************
2- Extract & Copy Npkboot Folder and Neofroyo-v01.zip to root SDcard ..
3- Run Haret & wait till it ask you to press Volume Down shortly to launch ClockworkMod Recovery ..
4- While In recovery menu , choose " install zip from SD card >>
choose zip from sdcard and select " Neofroyo-v01.zip " ..
-Then return back to main menu using " ok "
5- Check mounts (Mounts and storage menu), and make sure that system is mounted.
6- Install Gapps like you installed the build (point 4)
-Then return back to main menu using " ok "
- i fyou want you can instal neolang to have the build in other language, but maybe you will lose speed and stability (not sure).
7- reboot system now
8- Run " HARET.exe " & leave it to continue booting into Android ...
** For More info see http://www.neopeek.com/viewtopic.php?f=14&t=6630
***********************************************************************
* Attached Kernel is highly overclocked , it may not work with all kovsky devices , so if it doesn't work with you, try to change the overclocking value from 652 to 614 mhz in startup.txt ..
- If it is still not working , replace this kernel with "Turbo kernel" attached to package ..
***********************************************************************
Download: http://hotfile.com/dl/127082063/c9fda77/CWM_NeoFroyoV01X1.rar.html
Reported Bugs
Terminal Emulator and Quickpic not working: Oooops I forgot to exclude 'em! Just uninstall them via Settings and reinstall at least QuickPic again from Market -> not a serious bug, is it?
Credits & Thank You's:
Neopeek-Team for testing
XDAndroid-Team
Cyanogen + Team
Anybody else whom I forgot.
**********************************
I'm Not responsible for any damage for your device ....
Im not a dev, just put stuff together credit goes to all authors just posting here to spread the word, so if you have errors, please report in the threads linked above =).
sorry man, but this isn't right!
sure. you say all credits go to the devs in the very last paragraph.
but until there you make it look like you compiled this rom yourself by using simple c/p of neopeeks original post...
1- Format SDcard To 4 Partitions :
- 1- partition: EXT2 (System / about 250 MB )
- 2- partition: EXT2 (Data / about 450 MB)
- 3- partition: EXT2 (Cache / about 100 MB)
- 4- partition: FAT32 (SDcard / Rest)
Click to expand...
Click to collapse
this is wrong, fat32 needs to be first partition, otherwise windows won't recognize it anymore.
i don't know which gapps you put into this package, but it's certainly not the one neopeek tells you in cwm-thread. the meta-inf isn't replaced.
Is that any difference between this and THIS
jerrytan93 said:
Is that any difference between this and THIS
Click to expand...
Click to collapse
no difference, I just made all the steps for you so you just have to unzip the files and copy them in root of SDcard
ooooppssii daily i seemed to have made a new thread for something which is already thereE!
to bad wifi isnt working
It is, just get the right kernel, ygge or latest glemsom (19.08.)
but glemsom ain't so good for me:
- wifi working***
- system a bit snappier (or just wishful thinking?)
- permanent hiss from loudspeaker
- battery always full
- had to change cpu-freq to 652, phone kept freezing with 672
- sys-process-gapps fc's now and then
*** i didn't reinstall the rom, just changed kernel & wiped dalvik cache. So i don't know if something extra is left from ygge-kernel.
edit:
took longer, but it froze again. 633 mhz now.
Click to expand...
Click to collapse
Hi there!
It works fantastically, but I don't know if this build is supposed to have fixed this issue, I'm still having the hardware keyboard death problem. So I tried to implement ygge's keyboard-as-modules kernel, and when deleting the current modules, I have an error saying that they can't be removed because this is a Read-only file system. (like this: "cannot remove 'nameofthemodule.ko': Read-only file system")
It is not the first time I try to use this kernel, and the previous times, I could delete them without any trouble (through terminal emulator). I have tried with terminal emulator as a root, with other file explorers as a root and seems to be difficult to erase them. Is there any other solution? Oh, and I have already tried reinstalling again, but I guess I can't reinstall with ygge's kernel with keyboard as modules since I won't be able to press volume down to enter Recovery mode, am I right? Thanks.
Thanks in advance!
I already posted this issue twice in neopeek's forum, without any luck
Felipaoo said:
Hi there!
It works fantastically, but I don't know if this build is supposed to have fixed this issue, I'm still having the hardware keyboard death problem. So I tried to implement ygge's keyboard-as-modules kernel, and when deleting the current modules, I have an error saying that they can't be removed because this is a Read-only file system. (like this: "cannot remove 'nameofthemodule.ko': Read-only file system")
It is not the first time I try to use this kernel, and the previous times, I could delete them without any trouble (through terminal emulator). I have tried with terminal emulator as a root, with other file explorers as a root and seems to be difficult to erase them. Is there any other solution? Oh, and I have already tried reinstalling again, but I guess I can't reinstall with ygge's kernel with keyboard as modules since I won't be able to press volume down to enter Recovery mode, am I right? Thanks.
Thanks in advance!
I already posted this issue twice in neopeek's forum, without any luck
Click to expand...
Click to collapse
My X1i accept calls and wifi does not work, do not help any modifications.
Does someone else have this hardware key's freezing problem as well? How did you fix it? The current solution of the kernel with keyboard separated as modules doesn't seem to be working here
Felipaoo said:
Does someone else have this hardware key's freezing problem as well? How did you fix it? The current solution of the kernel with keyboard separated as modules doesn't seem to be working here
Click to expand...
Click to collapse
the fix doesnt work for me neither
Guy this is NEOPEEKS BUILD why u say its yours not fair......
ilgreco112 said:
the fix doesnt work for me neither
Click to expand...
Click to collapse
So what did you do? Use another build?
Felipaoo said:
So what did you do? Use another build?
Click to expand...
Click to collapse
Actually I'm not using android since I had too much problems with it

[Q] How to make a2sd darktremor work on official Gb2.3.6 DDKQ8??

Hi
This is my First post hope i will get a good reply from u guys in xda!!
I updated my phone via kies to official Indian Gb 2.3.6 with ddkq8..
But i don't know how to make a2sd darktremor (with ext4) to work with ddkq8..pls say which cf kernal to use??and some times i get busy box not installed & also about BLN,..i don't understand basically what a2sd darktremor needs to work with..!!Pls say the procedure to follow on newly flashed official gb 2.3.6 with ddkq8??,..do i need to root first before doing the procedure or will i be rooted while flashing cf kernal!! And pls provide me the necessary download links!!
Thanks!!
use link2sd
Flash CF-Root, then Flash a2sd.
How to
Here you have some instructions and infos abauth a2sd
Download script:
http://forum.xda-developers.com/showthread.php?t=715940
instructions page:
http://forum.xda-developers.com/showpost.php?p=7021325&postcount=2
NOTE: ROMS THAT ARE ORM (ORIGINAL ROM FROM MANUFACTURER...ALSO KNOWN AS STOCK ROMS) WILL NOT RUN ANY VERSION OF APPS2SD EXCEPT FROYO.
The code to launch Apps2SD is not present in the init.rc. The only way Apps2SD will work with a Stock ROM is if the init.rc has been modified with the commands to run Apps2SD.

Categories

Resources