Hey XDA, it's been a while. I tried to flash stock JF6 on my cappy last night and things went to hell.
The phone now only starts up for a forced download mode (inserting battery while holding volume buttons). When attached to Odin3-One-Click, it can begin the reset but crashes to a solid grey/pink/red screen when installing factoryfs.rfs, and then refuses to start up again for a couple of minutes. The previous ROM was cognition 4, I believe, alongside the CogKernel. I'm working with Windows 7 x64, which I understand can cause problems, but I don't really have a choice here.
I've uninstalled and reinstalled the Samsung drivers from the official Odin3 thread, restarting between each step. I've tried changing USB ports. I've also tried to flash with Heimdall, but it only sees the device as "Gadget Serial" and can't work with it.
What do I try next? When the phone comes back to life I'll be trying Odin with compatibility mode, but I don't know what else to do. Please save me!
Are you flashing with or without bootloaders? If without, try flashing a stock rom with them.
Also, look in my signature for the "Captivate Connection Issues" thread. That has some additional things you might be able to try.
jmtheiss said:
Are you flashing with or without bootloaders? If without, try flashing a stock rom with them.
Also, look in my signature for the "Captivate Connection Issues" thread. That has some additional things you might be able to try.
Click to expand...
Click to collapse
I'm using the Odin3 from DG's page: http://forum.xda-developers.com/showthread.php?t=731989
I do not get to choose what installs, however, I have Odin3v1.85 Multi Downloader that allows me to select files. Could you link me to a ROM that I should use?
Try GB 2.3.5 i897ucKK4
Sent from my SAMSUNG-SGH-I897 using xda premium
4-2ndtwin said:
Try GB 2.3.5 i897ucKK4
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
Ok, my question then would be - Bootloaders or no bootloaders? (I'm assuming I should go with bootloaders unless told otherwise)
EDIT: Bigger problem - the phone is taking longer and longer to recover from crashes. Last time I only waited a matter of minutes before it could get back to download mode, this time I've waited 20 and it still hasn't fixed itself.
U may have some hardware issues then.
But if it gets going u will need the GB Bootloaders in order to run GB.
Sent from my SAMSUNG-SGH-I897 using xda premium
Damn, it's really unresponsive now. 50 minutes wasn't enough this time. I'm getting worried, I can't remember how many tries it took last night, and I really need my phone back. A failed flash during the transfer of factoryfs.rfs shouldn't hardbrick anything, should it?
Nope. That should not at all. Just a failure during the boot.bin and/or sbl.bin would cause a hard brick...or mismatched bootloaders between froyo and gb.
Which specific Odin3 one click did u use ?? Gotta link to it or the thread ??
BTW I haven't even tried GB yet. I'm still waiting for it to "cool down" from the last crash. I don't know why it's doing this now, since I had it in download mode an hour and a half ago and didn't crash it or anything.
4-2ndtwin said:
Which specific Odin3 one click did u use ?? Gotta link to it or the thread ??
Click to expand...
Click to collapse
The one specified in my second post: http://forum.xda-developers.com/showthread.php?t=731989
^
Ok thx. Just wanted to make sure it wasn't the Stock jf6 with the "3 button fix".
Well i hope it gets going for ya. Not sure what could be the problem.....do u have another battery to try out in the phone ?? -- Just tryin to think of what may have gone awry.
Sent from my SAMSUNG-SGH-I897 using xda premium
I don't think it's the battery, though just before I flashed I had a 0% battery level erroneously detected.
UPDATE: The device is starting again, but now it only shows up in windows as "unknown device" and windows reports that it's malfunctioning. I'm restarting now.
Sorry for the double post, I think this is relevant though.
Now that the phone powers on to the download screen, I can plug it in to the computer but now receive an "Unknown Device!" error. Honestly this is just ridiculous, especially since I had no trouble transferring some of the Odin files. I'm downloading Puppy Linux now to see if Heimdall will pull me out of this.
UPDATE: The first time I started Heimdall on Linux it was able to detect the phone, but failed after the LOKE handshake part. Now it no longer sees the phone. I'm beginning to think there's something wrong with the USB port, even though it worked fine for file transfers just 2 days ago.
UPDATE 2: Good news everyone! The same linux install on a different laptop was able to see the device, and Heimdall could get all the way to "rebooting device" using the cyanogenmod kernel. However, the CM package doesn't seem to include bootloaders, so I can't actually start up the phone after downloading. I just realized that 4-2 also linked to Heimdall compatible bootloaders, so I'll be trying those now.
Jergling said:
Sorry for the double post, I think this is relevant though.
Now that the phone powers on to the download screen, I can plug it in to the computer but now receive an "Unknown Device!" error. Honestly this is just ridiculous, especially since I had no trouble transferring some of the Odin files. I'm downloading Puppy Linux now to see if Heimdall will pull me out of this.
UPDATE: The first time I started Heimdall on Linux it was able to detect the phone, but failed after the LOKE handshake part. Now it no longer sees the phone. I'm beginning to think there's something wrong with the USB port, even though it worked fine for file transfers just 2 days ago.
UPDATE 2: Good news everyone! The same linux install on a different laptop was able to see the device, and Heimdall could get all the way to "rebooting device" using the cyanogenmod kernel. However, the CM package doesn't seem to include bootloaders, so I can't actually start up the phone after downloading. I just realized that 4-2 also linked to Heimdall compatible bootloaders, so I'll be trying those now.
Click to expand...
Click to collapse
UPDATE 3: It turned out the problem was with the first laptop's USB setup. Every port is attached to an internal replicator, which I believe was the problem. I hooked it up to an old Toshiba and the Heimdall version of UCKK4 installed flawlessly. Now I'm running CM9 and it's amazing. Thanks 4-2ndtwin!
Related
Hey there, i have searched around for a day or so and found a similar post on here but no real answers thus far. There is a ton of information out there so i may have missed it but my phone is having issues so i really need to wipe and go back to stock, then update from there...
Running Cognition v2.2 Beta5.5 UCJ16. Love the rom but i have had some issues and decided to upgrade to the new Cog rom then found out i cant without going back to stock first. Tried to do that with "Odin" but i get the USB not recognized when going into download mode, Odin will not pick up the phone. I did read the entire Odin faq and saw that other ppl have had this issue but did not really find a solution. I can get into dl mode fine and i've never ever had an issue with my cpu not picking up the phone via the USB until now. Tried the adb reboot, volume buttons, everything in the faq, it's a no go & all my drivers are up to date. So far i can't do anything and it's getting a bit frustrating lol.. I rooted with the Galaxy S One click Root by TGA_Gunnman, not sure if that helps any.
Any help would be appreciated, thanks in advance!!
Also meant to ask, if i can't go upgrade to the new version of cognition can i flash from that one to a different rom and them maybe back to 2.1? I'm not a noob to rooting and flashing i did my last 2 phones and have rooted this one, i haven't had one single problem with anything of my phones until this one...
Try a different us port the ones on the back seem to work better
Already tried that same result, it won't recognize the device. I have to go out of town in a few days and need my phone to quit acting up lol. If i can't get it resolved by tomorrow i guess i'll just start trying to flash other roms and see if i can find one it will take and go from there..
CoolhandLocke said:
Already tried that same result, it won't recognize the device. I have to go out of town in a few days and need my phone to quit acting up lol. If i can't get it resolved by tomorrow i guess i'll just start trying to flash other roms and see if i can find one it will take and go from there..
Click to expand...
Click to collapse
Usb debugging turned on? You have odin opened up BEFORE you put your phone in download mode? Technically you don't have to odin to stock you just have to odin to a Rom that has 2e recovery. So you could try that if you can't get one click odin to work.
Sent from my SAMSUNG-SGH-I897 using XDA App
Yes i tried it with de-bugging turned on and odin running before hand. Pretty much tried everything in the Odin thread and about everything else i could find with google. The phone's just acting funky and not accepting it
CoolhandLocke said:
Yes i tried it with de-bugging turned on and odin running before hand. Pretty much tried everything in the Odin thread and about everything else i could find with google. The phone's just acting funky and not accepting it
Click to expand...
Click to collapse
How are you putting your phone into download mode?
Sent from my SAMSUNG-SGH-I897 using XDA App
I'm getting into download mode through doing the volume up/down then inserting the usb cable with the sim and everything out. I believe it's method 3 listed in the Odin post, it does go into download mode but i still get "USB not recognized" from both the front and back ports..
Finally got it fixed! Just tried it out on my friends laptop and everything worked flawlessly. Must be a problem in my Desktops USB somewhere but it is still odd as it worked fine and still does, just didn't work with Odin. I've seen other people with the same issue hopefully someone else can learn from my mistakes....Just try another PC lol.
CoolhandLocke said:
Finally got it fixed! Just tried it out on my friends laptop and everything worked flawlessly. Must be a problem in my Desktops USB somewhere but it is still odd as it worked fine and still does, just didn't work with Odin. I've seen other people with the same issue hopefully someone else can learn from my mistakes....Just try another PC lol.
Click to expand...
Click to collapse
I am glad you got it working cause I had ran completely out of ideas lol
Sent from my SAMSUNG-SGH-I897 using XDA App
Not to extend the thread but in my previous post i forgot to add, Thank you to all of you who tried to help!
Hey folks. I'm hoping to get through this in one piece, with one walkthrough.
I recently messed up in flashing a Rom to my Captivate. It cleared the phone of firmware and left me with the AT&T splash screen.
I bought a jig, and am now at the "Downloading..." screen and am trying to take this slowly to ensure a properly functioning phone (I've been without for two weeks now).
I've read through the sticky post [link]http://forum.xda-developers.com/showthread.php?t=884364[/link] and have most of the downloads. The Odin link is dead, and I don't have the proper version (I used a version I later found out was bad).
What I'm hoping for is to get someone to show me where the proper version of Odin is, and maybe give me a quick guide to doing this for a Rogers Galaxy S Captivate.
I hope I'm not coming off as lazy, but I tried this solo, and it went awry. Thanks for any help in advance.
This is the link for Odin. http://forum.xda-developers.com/showthread.php?t=731989
You want to Open Odin, then use the jig to put the phone in download mode, connect usb to your computer and wait until odin recognizes your phone. Click Start and sit back and wait. You should then be able to put whatever rom you want on the sd card and flash
Okay. I got the proper download, and used Odin. It reported success.
I haven't unplugged the phone from the computer yet, but it's also not showing as a drive on my computer. I'm at the stage where I'm supposed to root the phone after using Odin and before flashing.
Should I unplug the phone, or is that going to send me back to square one?
JavaMac said:
Okay. I got the proper download, and used Odin. It reported success.
I haven't unplugged the phone from the computer yet, but it's also not showing as a drive on my computer. I'm at the stage where I'm supposed to root the phone after using Odin and before flashing.
Should I unplug the phone, or is that going to send me back to square one?
Click to expand...
Click to collapse
If you used that Odin 1 click you will have the AT&T version, it will work but you will have the AT&T boot up screen. After it is finished your phone should reboot by itself. If it didn't try pulling the battery and then turn it back on.
Driver Installation Issue at Fault?
Okay, so I'm starting to wonder what's going on with the communication between my phone and my computer. I have the drivers, but when I try to install them (64 bit, for a dual-core, right?), it claims to fail.
I think maybe that this is the reason I can't get the computer to recognize the drive. Also, when plugged in last time, it said it failed to install drivers again. Even when the phone was operational, I had issues with that.
So . . . I'm wondering if maybe I solve that and the issue becomes seamless. Any thoughts on this would be appreciated, as it seems I'm stuck until I get the phone to register. Even Odin won't see it now, although I've already passed that step. F-Bomb.
Did you get the drivers right from samsung web site if not thats why they wont install i had same thing when i got my cappy.
I got drivers from.samsung.com installed em worked perfect sence. i kept the download saved had to install em a few times over the last 9 or so months. Only because of all the dam software hardware i run. Good luck
Sent from my GT-I9000 using XDA App
Just because it's a dual core processor in the computer doesn't mean you have a 64 bit OS.
You might want to know what version of windows you have...just a thought.
Okay . . . I can't seem to resolve this driver problem, nor can I move forward in the previous issue of getting my phone back to a functional state.
I can't imagine what I'm doing wrong that everyone else managed to avoid. Could I maybe request some one-on-one time with an experienced Rogers user? Just to recall the exact steps they took in order to successfully UNSCREW their phone.
Again, I appreciate all the help. Every post is making progress. I'm just frustrated at my ineptness with solid state installations.
I'm still not able to install the drivers or get my computer to register the phone as a drive. I did a bit more reading, but I've found nothing but different driver links. Has anyone else had this installation failure?
I have had driver problems before...try plugging up phone; on computer control panel, device managment , go to were it has device (just click then till se something about samsung) then uninstall drivers, next unplug phone, reinstall drivers that are on design gears (developer) thread for odin one click, next plug up phone sbf it will say new hardware and install drivers then see if that works... Ps if need to just pm me and I will get back to you to try and help
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
A side note: I just tried it from my computer and the link if good and they work
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Try it again, however this time plug your USB cable into the USB port in the back of the computer.
Drivers were installed properly with Toolbox. Thanks for the help
Hey there, i am feeling somewhat overwhelmed with all of the advice going on out there and need someone who can give me the answer to my specific problem hardware wise without breaking a sweat...
I flashed a froyo 2.2 rom onto my phone a while ago, recently all of my apps stopped working, and i could no longer install any apps.
Couple days ago i tried openning gmail and the screen went black and gave me the bzzzzzz...............................bzzz...bzzz...
vibrating error that you usually get when an app crashes.
Now the phone continues doing that even when booted up and stuff
It starts right after the S screen and repeats until the battery is removed.
My phone can't get into download or reset mode using the 3 button method so i bought a jig off of ebay, works like a charm.
however NOW, i cannot get the computer to see the phone; both when it is on and attached and in download mode and attached. Odin can't see it, neither can Kies.
If i can get either to see it, i can look up the flashing process to make sure everything is right.... but as of yet nothing i am doing is making a difference.
Thanks for any help
Ok, I'd focus on odin so disable Kies (in task manager processes - all the kies processes).
Then I would 1) reinstall the drivers (standalone ones) 2) Have a few versions of odin to try (like 1.3, 1.7 and ez odin) 3) Clean your usb port on the phone (and computer maybe too - whats the harm?).
Usually if you are sure the drivers are Ok then you should be able to odin working with a nice clean port. They are more sensitive to dirt/moisture or whatever than they should be.
Try that and let us know...
BTW Some people think that the order is important but I've never noticed that. I always have odin open and then connect it but cant hurt to try the other way around too.
Hey thanks alot,
I am at work right now but i am optimistic about trying that out lol.
Just so i know for when the time comes and if Odin works, what files do i need to flash it? .pit, .tar and anything else specific for Bell Canada?
I only ask because you are with Bell so it is probably a very simple answer for you. Otherwise I am sure i can find it elsewhere.
Thanks,
I'll keep you updated
Josh
Download the complete jl2 rom from link I posted yesterday (search my posts) with repartition ticked, then flash the kc1 rom from stock rom link on xda or at samfirmware.com and flash without repartition if you want the latest. You could just try the kc1 step but I you need to repartition.
Sent from my GT-I9000M using XDA Premium App
Hey man,
my phone has never been sent in for repairs or replaced...
I was reading one of your other posts and you advised another member to send it in and maybe they will replace/update hardware?
I have still had my phone for less than a year so sending it in will be no problem at all...
Should i flash to the latest myself or return to stock and send it in?
I really appreciate your help.
Thanks
Well he knows his is broken as he can see that his internal memory reads 0 (which means its cooked - ask me how I know...) and he was trying to fix it in a round about way. Or there was the guy who flashed a captivate rom - that was just a big no-no.
You might just have a corrupt partition or some other corruption in the file system. I seem to get that all the time and its a pain but very fixable .
Alright, sooo
-uninstall Kies
-install drivers only
-try to connect to Odin
-If succesful flash with Odin
-dance with joy
Got it, I will update you later when i get home.
Thanks
installed drivers on my work computer (32 bit windows xp) and nothing... I've tried phone off, phone on, phone in d/l mode... It doesn't pick up anything...
I can try it on my Windows 7 comp at home and see if that works but i'm wondering what the worst case scenario is just bringing into Bell and having them fix it... Am i looking at charges, warranty voiding, etc.. etc... to have it fixed or could i BS my way out of it?
Fuuuuuuuuuuuuuuuuuu
pretty sure i flashed the wrong firmware on my phone, when it boots up it says GT-I9000 not GT-I9000M.
It worked fine for like 6 months so i never questioned it... damn damn damn
Not to be completely devious but i got an extended warranty that replaces the phone due to water damage, theft, etc. etc...
If there is no other way should i take advantage of that?
I would hate to jump to one of those actions but i am somewhat panicking becuase i made a super-noob mistake and effed up my phone....
I9000 firmware is completely compatible. The text you see is from the kernel which are always for i9000 unless you have one of the three bell firmwares. So that's not the issue.
Sent from my GT-I9000M using XDA Premium App
RogueCow27 said:
Not to be completely devious but i got an extended warranty that replaces the phone due to water damage, theft, etc. etc...
If there is no other way should i take advantage of that?
I would hate to jump to one of those actions but i am somewhat panicking becuase i made a super-noob mistake and effed up my phone....
Click to expand...
Click to collapse
I would keep trying. I have gotten warranty before and I was in the same predicament as you almost except I knew that the internal memory was dead. But that was also around the time when most of the I9000M models were dying. They might be checking more now.
If you get odin to flash a stock rom then you can go for it but by then you should be able to fix it.
Sent from my GT-I9000M using XDA Premium App
Alright i will keep trying.
As far as the firmware goes, my gf and i both have the same phone, but she kept heres official and i put custom roms on mine (just the 2.2 because it wasn't available)
We are both on bell canada so i asked her to boot up her phone and the beginning message on hers says GT-I9000M so it freaked me out lol
I will try on my home computer,
keep your fingers crossed for me
Alright, so Odin can now see my phone (it was the damn cord, my Win 7 comp couldnt see it but my xp work laptop can)
Which firmware would you recomend flashing? Stock gingerbread or a slight variation?
I am at work right now so i can wait a bit for a good response. It'd really help me out if you could provide links and tips to the best firmware out right now (i have no problem flashing a custom ROM if it is good).
Thanks alot,
Josh
Succesfully Flashes Gingerbread 2.3.4
Thanks for all your help!!!
how did you manage to see it in odin?
i have te same problem with restarting just after first screen (after flashing to gingerbread) but i cant see it in odin so i cant flash it again?
when i connect it when turned off, a small icon appears with usb connected sound but its still not visible.
Is it maybe my win7?
help, anyone please
Did you start in Download mod? Did you kill the Kies processes in you Win7 task manager ?
If yes, sometimes Windows takes time to install the drivers (be sure ton be connected to the internet), you should also close and relaunch Odin.
i launched download mode with sdk, and now i cant start it.
i went to another pc with xp. it installs drivers but odin cant recognize it.
Well i did it on my work XP computer becuase WIN 7 wasn't recognizing it. But it turns out the whole time the cable i was using would connect to charge, but not act as a pc connection.
hey guys i have a captivate that i tried flashing and was successful then i tried again and the screen went black. im not sure if my battery died during the process or what but idk what to do. I cant get into recovery mode, i can only get into downloading mode but none of the odin's ive downloaded have recognized my device today. they worked fine yesterday. then i tried "hemidall one click" to try and get it back to stock but no luck. also when i try to power on I get the "Cornkernel" loading screen since that was the kernel i had loaded when it was working, but it fills the bar then shuts off. so it seems like im going to be at the mercy of a computer program since i am unable to access anything on the phone, right? I recently upgraded to gingerbread before all of the flashing of the new roms. all i want is to get back to either froyo or gingerbread, i dont really care, heck ill even take 2.1 at this point. if anyone knows whats going on and can help me thatd be great.
Thanks
Remember to use a rear usb hub for destop and run as admin. Heimdall will mess up your odin drivers.
You may also want to check out the captivate connection issues thread.
Also, to clarify further on prbassplayer's point about Heimdall, it will write its drivers over the drivers assigned to the USB port you are plugged into when it detects your phone. So if you have 4 USB ports and you use port 3 for Heimdall, it would look like this:
1 - Odin port
2 - Odin port
3 - Heimdall port
4 - Odin port
All this means is that you'll need to be aware of the port you used with Heimdall, or just reinstall the odin drivers (they'll overwrite the Heimdall setup).
OK so i tried what you mentioned in that thread on the connection issue and unfortunately it didn't work. is there a way i could start fresh? like delete all the drivers from my computer and then try it again, or do u not think that would work? im open to any ideas/suggestions right now because i hate having an extra paperweight and the thought of buying a new phone.
Don't know if this'll help or even why it worked for me but, when I had problems with odin recognizing my phone, I reinstalled/repaired samsung kies and odin would work for at least one flash.
Note: used full odin (not oneclick)
Good luck
hey guys thanks a bunch i finally got it to work. i had to use a different computer like you said. What a great feeling to have a functional phone again..
Thanks Again!!
So i got the phone back up and running android 2.1 and I would like to get it back to the stock 2.3 I had before the whole mess of rooting and stuff. but when i try to upgrade with kies or straight on the phone it ends up failing and telling me to try it again. any ideas why this is happening? or how to fix it.
blackjack54 said:
So i got the phone back up and running android 2.1 and I would like to get it back to the stock 2.3 I had before the whole mess of rooting and stuff. but when i try to upgrade with kies or straight on the phone it ends up failing and telling me to try it again. any ideas why this is happening? or how to fix it.
Click to expand...
Click to collapse
Kies sucks lol
look at my sig the first "go to" has the One Click Odin file to get you to stock and rooted 2.3 ...should take no more then 5 mins to do it
the link on that page for the 1 click odin doesnt work.
Try looking >>HERE<<. There are more one clicks there than you will ever need (hopefully)
Thanks I think I might try one of those. But considering what happened earlier in the week i want to clarify/ask a few ?s about that page. How do I know which Gingerbread to use of the 3 listed? How do I know whether or not to click the one with or without the bootloader? I'm new at this with android but I used to flash roms on my old windows mobile htc TILT.
blackjack54 said:
Thanks I think I might try one of those. But considering what happened earlier in the week i want to clarify/ask a few ?s about that page. How do I know which Gingerbread to use of the 3 listed? How do I know whether or not to click the one with or without the bootloader? I'm new at this with android but I used to flash roms on my old windows mobile htc TILT.
Click to expand...
Click to collapse
if you have never flashed GB bootloaders, you need to. Just oonce will work from that time forward. After you flash bootloaders, it's best to avoid them. A bad bootloader flash is one of the few things that will turn a Captivate into a paperwight. About which GB to use, I would say KK4. Its the same as the Official KK4 that was released. So to recap, flash bootloaders only once, then use no bootloader packages after that.
Im not sure if I unlocked them or not honestly. I know i had the phone rooted at one point and was running Cerberus rom. is there any way for me to check?
If you don't know, flash them.
ok i apologize in advance if this is a stupid obvious question..i got the odin one click and i was looking at the page u referred to me to and im wondering what the kernel is for? you cant place it in the odin one click obviously so is that just to keep things together or do i actually need it?
The kernel links are just to use if you want to root the stock rom. You have to use full Odin for those. Stick with the one click until you feel more comfortable in flashing AND do a lot research before your next flash.
so i got the KK1 gingerbread working and everything seems to work fine but now my data doesnt work. So I cant get ATT 3g or edge or anything the only internet i recieve is wifi. anyone know why this is? or how to fix it. ive tried a reboot and nothing ive tried changing the settings under network settings.
Before ppl start asking me, this is what happened. I gave my Cappy to my daughter and after months of running Dlev Rom, I decided to upgrade to ICS. She was not happy with the rom and wanted to go back to gingerbread. I tried downgrading via recovery but had issues with the downgrade. Long story short....ignorant me, I used Odin and end it up with eclair.
Now here is where the problem started. The phone was succesfully flashed with eclair but button combo wasnt working at all. So, I rooted first and then with adb, I adb reboot download, then once in download, I flashed ginger bootloaders and thats how i end it up with the infamous phone /!\ comp. soft brick. Since originally i had no button combo working, I cant get into download mode. My comp just wont recognize the Cappy.
I have searched for hours and tried all ways possible to get into DL mode but "nada"! Even with Odin opened or heimdall, batt out, batt in, all combinations of buttons...nada (nothing), no luck. Also tried the program by Adam to unbrick the Cappy (that I've found searching) but still nada! I have windows 7 with java and that program by Adam just wont work on my comp.
Can someone try to help me on what can I do without sending my daughter's Cappy to a shop...lol?
Edit: In this post I explain what got "me" out of the softbrick after 2 days of trying! It might not work for who ever falls in a similar situation and even mayb is not a proper way of doing things, but it worked on my end!!! http://forum.xda-developers.com/showpost.php?p=26305016&postcount=23
You can use that screen as a download mode.
Remove Java. And then go download Java JRE.
Java JRE 32 bit
Java JRE 64 bit
Try going and grabbing the Heimdall KK4 1 click. Or you could try any of the Gingerbread Heimdall packages in the OneClick Master Collection
I think you'll be fine to run Heimdall after the Java reinstall.
Red_81 said:
Try this:
Take out battery
Plug in usb cable
Hold volume+ and volume-
Pop in battery
This should take you straight into download mode. Just have to flash a new ROM/Stock Image
This came from another post about 10 down from yours.
Click to expand...
Click to collapse
Lol....Trust me, I've done that and all ways possible. At least the phone isnt hard bricked. All i need is DL mode and I should be good! Thx sweety!
Baby Liz Sandra said:
Before ppl start asking me, this is what happened. I gave my Cappy to my daughter and after months of running Dlev Rom, I decided to upgrade to ICS. She was not happy with the rom and wanted to go back to gingerbread. I tried downgrading via recovery but had issues with the downgrade. Long story short....ignorant me, I used Odin and end it up with eclair.
Now here is where the problem started. The phone was succesfully flashed with eclair but button combo wasnt working at all. So, I rooted first and then with adb, I adb reboot download, then once in download, I flashed ginger bootloaders and thats how i end it up with the infamous phone /!\ comp. soft brick. Since originally i had no button combo working, I cant get into download mode. My comp just wont recognize the Cappy.
I have searched for hours and tried all ways possible to get into DL mode but "nada"! Even with Odin opened or heimdall, batt out, batt in, all combinations of buttons...nada (nothing), no luck. Also tried the program by Adam to unbrick the Cappy (that I've found searching) but still nada! I have windows 7 with java and that program by Adam just wont work on my comp.
Can someone try to help me on what can I do without sending my daughter's Cappy to a shop...lol?
Click to expand...
Click to collapse
The [Phone /!\ Computer] screen is another method of Download Mode. You should still get Odin to recognize the phone. If Odin recognizes the phone, you should flash KI2 from This thread, since it has CWM injected. Once you have CWM, you have a clean slate to install any ROM you desire.
If Odin does NOT recognize you phone no matter which USB port you connect the phone to (as it happened to me once), you could try what I did. I downloaded Windows installer for Ubuntu Desktop, and that got me Linux. Once I had Linux, flashed KB2 from the ROM thread linked above. Why Linux? Because I never got Heimdall to work on Windows, but I did on Linux. After my phone was completely stock, I followed the instructions on TRusello's Guide to Flashing ANY ROM to get my phone set up the way I wanted.
I'm sure there are faster ways than the one I just gave you, but I can vouch that my method works, and you might get your phone sorted out while you wait for a better response. Good luck!
That will teach me to edit my post without refreshing first!
kafepuya said:
The [Phone /!\ Computer] screen is another method of Download Mode. You should still get Odin to recognize the phone. If Odin recognizes the phone, you should flash KI2 from This thread, since it has CWM injected. Once you have CWM, you have a clean slate to install any ROM you desire.
If Odin does NOT recognize you phone no matter which USB port you connect the phone to (as it happened to me once), you could try what I did. I downloaded Windows installer for Ubuntu Desktop, and that got me Linux. Once I had Linux, flashed KB2 from the ROM thread linked above. Why Linux? Because I never got Heimdall to work on Windows, but I did on Linux. After my phone was completely stock, I followed the instructions on TRusello's Guide to Flashing ANY ROM to get my phone set up the way I wanted.
I'm sure there are faster ways than the one I just gave you, but I can vouch that my method works, and you might get your phone sorted out while you wait for a better response. Good luck!
Click to expand...
Click to collapse
Yeeee....finally someone with a good heart and willing to share knowledge!!! And BTW, yes I tried all usb ports. The difference between your comp and mine is that I can run heimdall but like I said, way i plug the usb, my comp nor heimdall and/or Odin recognize the phone after the brick.
I'm not home at the moment but thank you from the bottom of my heart for your info. I'll get home kind of late tonight but I will follow your info to the tee and keep u post it...if u dont mind!
Thx and a kiss for you sweety!
Sent from my SGS II 4G using XDA Premium App
Heimdall and odin use different drivers, Once you install Heimdal and use your phone on a USB port, that USB port will only work with Heimdall. Odin will no longer work on that USB port, Until you uninstall the heimdall drivers
TRusselo said:
Heimdall and odin use different drivers, Once you install Heimdal and use your phone on a USB port, that USB port will only work with Heimdall. Odin will no longer work on that USB port, Until you uninstall the heimdall drivers
Click to expand...
Click to collapse
Short and sweet...i installed ubuntu last night on my pc and I thought i lost windows. Did some search and I can choose when my pc start up either W7 or ubuntu. Went to bed at 4am trying to install java to ubuntu with no luck. To b honest, i'm about to quit trying to get this phone in DL mode. My daughter hates me and my husband told me, u messed it up...u fix it! Agh!!!!! I'm trying again but if I cant get it to work I rather just buy my kid a new phone....and thats a shame because that Cappy has been a warrior!
Any other method to get DL mode??? PLEASE...SOMEONE????
Once you're at that screen, it is download mode. You could try a jig. You can build one or buy one.
Did you reinstall java on Windows 7 and then try Heimdall?
Red_81 said:
Once you're at that screen, it is download mode. You could try a jig. You can build one or buy one.
Did you reinstall java on Windows 7 and then try Heimdall?
Click to expand...
Click to collapse
Yes I did and pc still not recognize device. Tried all ports and different usb cable...still no go!
Did device manager not recognize it or Odin/Heimdall not recognize it? I know my system wouldn't show it was connected but Odin/Heimdall still would.
Red_81 said:
Did device manager not recognize it or Odin/Heimdall not recognize it? I know my system wouldn't show it was connected but Odin/Heimdall still would.
Click to expand...
Click to collapse
Neither one recognize the device. With Odin you're supposse to see the yellow light meaning its connected...but nothing, and with heimdall clearly says disconected. I am sooo exausted looking for an answer as to what to do to get this phone on DL mode! I've used both programs in the past but the phone just dont want to come alive!
I understand how frustrating it can be to get a phone to respond.
I went back to your first post to make sure I didn't miss anything and I realized what the issue might be. Since the phone was upgraded to ICS it wouldn't be using the standard captivate drivers any more.
Let's try this:
Download and install the Android SDK
Add the Google USB Driver
Try ODIN/Heimdall again.
I think I had a similar issue when I was reverting a phone from CM7 back to Stock captivate.
Red_81 said:
I understand how frustrating it can be to get a phone to respond.
I went back to your first post to make sure I didn't miss anything and I realized what the issue might be. Since the phone was upgraded to ICS it wouldn't be using the standard captivate drivers any more.
Let's try this:
Download and install the Android SDK
Add the Google USB Driver
Try ODIN/Heimdall again.
I think I had a similar issue when I was reverting a phone from CM7 back to Stock captivate.
Click to expand...
Click to collapse
Oookkkk...will give this a try! Thank you.
Baby Liz Sandra said:
Oookkkk...will give this a try! Thank you.
Click to expand...
Click to collapse
I think it will work. Sorry it took so long for me to realize it. I actually had to do the same procedure within the last week but less sleep + work + cold is making me a little foggy.
Red_81 said:
I think it will work. Sorry it took so long for me to realize it. I actually had to do the same procedure within the last week but less sleep + work + cold is making me a little foggy.
Click to expand...
Click to collapse
Just finished installing both...restarting pc now and will report back. Thank you yet again!
Baby Liz Sandra said:
Just finished installing both...restarting pc now and will report back. Thank you yet again!
Click to expand...
Click to collapse
Ok...thats it! That did not work either. I connected my SGS II just to see if my pc would recognize the phone, and indeed my pc picked up the device as well as my husband's Sensation. So thats it! Just called Radio Shack for a jig and the guy never heard of that...lmao! You guys should see my daughter's look at me....awh!
Anyway...I'm subscribed to this thread so if anyone has another bright idea I'll give it a shot. Thanks again!
Sorry that didn't work either. Here's another thread about connection issues to the computer. I hope this helps
http://forum.xda-developers.com/showthread.php?t=1351224
Red_81 said:
Sorry that didn't work either. Here's another thread about connection issues to the computer. I hope this helps
http://forum.xda-developers.com/showthread.php?t=1351224
Click to expand...
Click to collapse
Well...thank you! Don't know if i should keep DLing stuff to my pc. Now I have ubuntu, sdk manager, hemidall, dont know how many odins, etc. My husband just ask me for a new pc because he tried to uninstall ubuntu and he was unsuccesfull at it. Now this softbrick is gonna cause me some major issues family wise. This really sucks! But hey, me been a female, I just learned that nothing is impossible for us. If my hubbie dont wanna help me...I'll get it done one way or another. I will see my daughter smile....believe that!!!!!
Thank you!
I have a 2.5 year old daughter and would do anything to see her smile.
Here is a guy here on XDA who makes the jigs. However, I still believe you just have a driver issue. At this point I can only say to take off all the drivers, odin, and heimdall and start fresh.
http://forum.xda-developers.com/member.php?u=500006
I used his kindle fire cable and it was great.