Database Develop

[Q] Rooting Moto Milestone. Is it like climbing MT. Everest?

HI people. First of XDA Forum and Dev as you guy's are doing a great job.
Secondly i have this Motorola Milestone GSM version. I am stuck on Android 2.1, as every one how fast Motorola release Android updates for their smartphones. I have gone through lot of Rooting guides but i haven't tried one yet.
As there are lot of Rooting guides and ROM for Motorola milestone on XDA as well, i am kind confuse how to do rooting and how to use a ultimate ROM on Milestone.
If you guy's can look at my Moto version as given below and can suggest me some step by step guide and Some Good ROMS as well i will be very thankful to you guys'
I know there are lot of other users who have asked same question but i want it kind simple and crisp.
Model Number
Milestone
Firmware Version
2.1-update1
Firmware Configuration Versio n
GAS_EMEA_USASHLS00RTINT_P016
Baseband Version
3GSMEPU91A_U_91.07.56I
Kernel Version
2.6.29-omap1
Build Number
SHOLS_U2_02.36.0
Click to expand...
Click to collapse

Most one-click-rooters work fine with the Milestone and it doesn't get any easier then running an app .
That's how I did my at least.

I have used universal root, but that doesn't allow APP2SD and using custom ROMS. So i want complete rooting so that i can load custom roms.

gaggid said:
I have used universal root, but that doesn't allow APP2SD and using custom ROMS. So i want complete rooting so that i can load custom roms.
Click to expand...
Click to collapse
Yes it does...
The problem is that:
-for APP2SD you must have ext2 partition which you probably didnt create and for Custom ROMS you have to load the vulnerable recovery...which you probably didnt do...as well
Just my supposing...Corect me if I'm wrong!

First, ( I think) you have to flash vulnerable recovery, then root. There is also a beta 2.2.1 beta sbf available. after achieving root, you can google GOT TEAM ANDROID and click the first link which should lead to their blog - http://www.google.ca/url?sa=t&sourc...BQ82GR7pNmLJSfPpg&sig2=Jd4iM6Nov5eYhJa2yrZLGg and there should be further instructions there. Good luck ( remember I think these are true, not 100% sure)

mohitrocks said:
First, ( I think) you have to flash vulnerable recovery, then root. There is also a beta 2.2.1 beta sbf available. after achieving root, you can google GOT TEAM ANDROID and click the first link which should lead to their blog - and there should be further instructions there. Good luck ( remember I think these are true, not 100% sure)
Click to expand...
Click to collapse
Can you guide me through on how to do
Flash Vulnerable Reovery.
How to root Milestone
What is SBF and how to use it.
What GOT TEAM ANDROID and why i need them?

If your milestone is anything like mine (I use the milestone available from telus, in canada), then your service provider may have added an un-root and return-to-factory-bootloader check on every boot.
in which case, you would need to install the OpenRecovery backup tool onto your sd card (it's an update.zip file + OpenRecovery directory), then flash a vulnerable bootloader using spf. reboot the phone (as is necessary when doing this flash), and as the system is coming up, start up into recovery (by pressing+holding the camera button, waiting for the yellow triangle w/"!", then pressing vol+ and the camera button), then execute update.zip
drop to terminal, and depending on your model, the .sh file that's un-rooting your phone may be in a different location, and simply rename the file, delete it, or make it non-executable.
Good luck!

Mystik said:
If your milestone is anything like mine (I use the milestone available from telus, in canada), then your service provider may have added an un-root and return-to-factory-bootloader check on every boot.
drop to terminal, and depending on your model, the .sh file that's un-rooting your phone may be in a different location, and simply rename the file, delete it, or make it non-executable.
!
Click to expand...
Click to collapse
I just bought the telus milestone a few days ago and am looking to bypass the update.zip when I go into recovery by permanently replacing the stock recovery with a custom recovery, would disabling this .sh file aid me in this respect?
Where could I find it?

I think i found complete guide for doing this.
Hope it will work.
Which ROM is best for Milestone ?
I am not talking about jazzy ROMs, i want a ROM with all cool features + stable functionality

i always have a hard time rooting Milestones :/

Still not able to get any strong good references on Hacking Milestone.

Need help from Root Froyo user

Hey all so I currently have an unlocked bootloader, rooted Nexus One still running the Stock Froyo 2.2.2. and I decided to finally upgrade to the OTA Gingerbread update but have a problem.
The OTA update restarts my phone with a triangle with an "!" inside it and an Android next to it, so I decided to try a manual update as described here.
Everything went well until the installation itself, during the install I kept getting some sort of error stating Twitter.apk in the system directory could not be authenticated.
So here's the problem, with Titanium Backup I made the stupid mistake of uninstalling it and not backing it up when I first rooted a while ago. I thought I could just reinstall it from the market but I get the same error. The only solution I can think of is if someone running a Nexus One Stock Froyo could possibly send me the Titanium Backup files of Twitter, hopefully this would make it work, otherwise I don't think I could ever update.

Since your bootloader is unlocked, you can use fastboot to install a custom recovery and then flash whatever you want (including a stock image)...
Sent from my Nexus One using XDA Premium App

danger-rat said:
Since your bootloader is unlocked, you can use fastboot to install a custom recovery and then flash whatever you want (including a stock image)...
Sent from my Nexus One using XDA Premium App
Click to expand...
Click to collapse
Thanks for the response, but I'm having trouble figuring some of this stuff, after spending some time with the search option here in XDA:
1. I don't the difference between custom recovery and flashing an image.
2. I can't find a simple stock Gingerbread image (thought its called ROM?) Details in posts tend to be vague for people that are learning this stuff, like me.
3. Many people have written to use Amron_ra 2.2.1 but I don't know the specifics of each ROM are (ex. if its Froyo based, Gingerbread based, etc.)
4. Would using ROM Manager be a good method to use any ROM or is it limited?
I'm essentially looking for an effective method to upgrading to a clean Gingerbread, since doing it the normal way won't work on my phone (as stated in my first post).

1 - Recovery, bootloader, and 'ROM' are two different partitions on you phone. Once you break security on one, you can use it to break the security on the other. In your case, the security on your bootloader is broken (unlocked), so you can use it to install new software on the other partitions.
2 - See bullet 4 on the first post of this thread:
http://forum.xda-developers.com/showthread.php?t=1005591
3 - For recovery you have 2 choices, Amon Ra or Clockwork, If you go with Clockwork, I recommend you stay away from 3.x versions. Unless the ROM you want to install says otherwise, either of these recoveries will work.
4 - ROM Manger will work. It's an easy way to achieve results, but unless you know what you are doing, it's also an easy way to screw things up.
I suggest you take it a step at at a time, and really understand what you are doing. Reading the wiki is always a good start, then ask specific questions...
http://forum.xda-developers.com/wiki/index.php?title=File:Nexus_One.png

Thanks Danger, I made the jump to Cyanogen 7, RC-4 via ROM Manager and couldn't be happier! Only problem is the known audio bug for Nexus One (person on other end of a call hears a lot of static sometimes, and have to recall them). The forced apps2sd is by far my most favourite feature, especially since the N1 internal space is pretty horrible, I've moved most of my apps2sd and haven't had any problems thus far.
Thanks for recommending CM7, I just wish their website listed the full features for newbies like me.

Thanks danger-rat http://www.nexusoneforum.net/forum/...lick-doesnt-work-gingerbread-2.html#post93952
I downgraded my gingerbread to froyo
Was pulling my hair out with a lame guide in the general section

Congrats!!
Sent from my Nexus One using XDA Premium App

Need to Re-root devices

Good Morning/Afternoon Everyone viewing.
I have the Motorola Atrix (ATT) and the Samsung Galaxy Tab (Sprint), Both had root at one point, but thanks to Firmware updates, neither are rooted.
I originally rooted my Tablet with z4root, which worked as expected and perfectly. Once I updated to sprints latest (Firmware 2.2.1, Kernel 2.6.32.9, Build Number SPH-P100.EB28) I lost root. So, z4root worked originally, I tried it again, and now, it runs, it flashes that it is acquiring root shell, installs the Superuser App then the App (z4root v1.3.0.) ends and brings back to the home screen. No Reboot, nothing else. I fire up a Terminal and it's normal, $, not root, #. I've tried running z4root a few times, using perm and even temp root options, have performed a factory reset, and nothing has worked. So, with all this hassle thus far, I'm reaching out. I've searched a bit and started getting pretty confused on what does and does not work, so is there anyone out there who can point me to the correct thread or at least toss out a Method that Does in fact work for my version, I would be extremely Jazzed, Happy, Appreciative, Might get a Cat and name it after you (And I am allergic to those beasts.).
As for the Atrix, I am more pressed to root the tab as I would like to start playing with Custom ROMs on it (Cyanogen 7 looks like fun.). But Wanting root back on the Atrix would be nice so I can switch from using PdaNet to using Barnacle again. Same experience with z4root, it originally worked, now, no go. Atrix info is Firmware at 2.2.1, System Version: 4.1.57.MB860.ATT.en.US, Kernel: 2.6.32.9-00005-gde8e6dc, and Build number: OLYFR_U4_1.5.7.
Any help provided, again, would be greatly Appreciated.

Double posted for some reason.

z4root doesn't work on newer firmwares. Try looking superoneclick with temproot. Or you could use oldin to revert to the original firmware and use Z4 to root then install custom rom that is 2.2.1 base then updated latest firmware as the developer updates it.
Google your devices and got these results.
Atrix. http://www.youtube.com/watch?v=A_JINF__UKg
Sprint tab. http://www.galaxytabs.com/2011/02/how-to-root-the-galaxy-tab-with-super-one-click/
#1 rule of Android - if you're running a hacked / rooted system, NEVER
apply an update until someone you trust has confirmed it's hackable!

Thank you Jerry, I ran across a thread earlier on taking the tab back to eb24 from 28, so I will do so tonight. The Atrix ill conquer next. =)
- Knox
Sent from my MB860 using Tapatalk

Don't forget to give a thanks for those that help.

jerrycycle said:
Don't forget to give a thanks for those that help.
Click to expand...
Click to collapse
Was not aware I actually had to click the "Thanks" Button (Did not see it in TapaTalk.) and got a bit grumpy at first due to me saying Thanks but you posted this reply. I hit the button, Thanks again.

ICS working for Bell XT860 without SBF change

Hey Guys, I don't think this has been posted before, so thought I'd share. I managed to get CM9 working with my Bell XT860 *without* needing to change up the phone using another country's fastboot file.
My phone was Bell 2.3.6, rooted, otherwise stock. I used Hashcode's safestrap to make a nandroid backup and install the latest patched CM9 from Rick#2 available here: http://forum.xda-developers.com/showthread.php?t=1465297
I actually didn't expect it to boot up, but thought I'd give it a go since even if it failed the worst that could happen is that I'd have to SBF anyways.
At first it was a black screen, I had to do a battery pull. After the battery went back in, it started booting up with the animation screen, which showed multiple times over about 5-10 minutes. Then the phone started up Ice Cream Sandwich!
I've been testing it out a bit.. not much yet, but Market is working, data 3g seems to be working 2700 kbps up / 1341 kbps down (with a server that's super far away, 321ms ping). GPS is working... Wifi good. Camera does not work.
Wow, I never expected this. I think this gives hope to those who want to try out Ice Cream Sandwich but still want the ability to go back to stock. Or am I missing something?

ncho2233 said:
Hey Guys, I don't think this has been posted before, so thought I'd share. I managed to get CM9 working with my Bell XT860 *without* needing to change up the phone using another country's fastboot file.
My phone was Bell 2.3.6, rooted, otherwise stock. I used Hashcode's safestrap to make a nandroid backup and install the latest patched CM9 from Rick#2 available here: http://forum.xda-developers.com/showthread.php?t=1465297
I actually didn't expect it to boot up, but thought I'd give it a go since even if it failed the worst that could happen is that I'd have to SBF anyways.
At first it was a black screen, I had to do a battery pull. After the battery went back in, it started booting up with the animation screen, which showed multiple times over about 5-10 minutes. Then the phone started up Ice Cream Sandwich!
I've been testing it out a bit.. not much yet, but Market is working, data 3g seems to be working 2700 kbps up / 1341 kbps down (with a server that's super far away, 321ms ping). GPS is working... Wifi good. Camera does not work.
Wow, I never expected this. I think this gives hope to those who want to try out Ice Cream Sandwich but still want the ability to go back to stock. Or am I missing something?
Click to expand...
Click to collapse
If you bootloop while in safe mode DON'T SBF. Safestrap works by renaming /system to /systemorig and making /preinstall your new /system.
This means when you're in safemode you can always access recovery. So if you bootloop just battery pull to get out of the loop and then you'll e able to hit menu and enter safestrap. Either flash a different rom or return to nonsafe. If you are using safestrap 1.08 and not 1.08d you can't even flash nonsafe mode (1.08d is tweaked to allow advanced user to flash over their nonsafe, for example I have both liberty and eclipse roms on my phone no stock at all)
Also first boot of a rom always takes a long time. After that it should boot much faster
As another note if you do manage to screw up /systemorig somehow you can use motofastboot utility to flash just the system.img part of the SBF package. This will only replace the rom, then you just reboot, install safestrap and restore you backup.
Sent from my XT860 using xda premium

Wow, thanks for the warning, very good information! It's so good to be able to try some custom roms again. I'm out of CM9 already for lack of camera but so far am really impressed with Liberty, it's like my phone has come to life again. Very quick and responsive, amazing ability to customize as well.

Endoroid said:
If you bootloop while in safe mode DON'T SBF. Safestrap works by renaming /system to /systemorig and making /preinstall your new /system.
This means when you're in safemode you can always access recovery. So if you bootloop just battery pull to get out of the loop and then you'll e able to hit menu and enter safestrap. Either flash a different rom or return to nonsafe. If you are using safestrap 1.08 and not 1.08d you can't even flash nonsafe mode (1.08d is tweaked to allow advanced user to flash over their nonsafe, for example I have both liberty and eclipse roms on my phone no stock at all)
Also first boot of a rom always takes a long time. After that it should boot much faster
As another note if you do manage to screw up /systemorig somehow you can use motofastboot utility to flash just the system.img part of the SBF package. This will only replace the rom, then you just reboot, install safestrap and restore you backup.
Sent from my XT860 using xda premium
Click to expand...
Click to collapse
hi there ,i using 1.08d and try to flash willis111's bell 2.3.6 rom ,and I want to flash it to the orig system ,not the preinstall ,but every I flashed it ,the my xt860 restart and into the ori rom(2.3.5 bra),not the bell 2.3.6.
here is what i do
1 restart my xt860,and press menu
2 in the safestrap,wipe date ,format system ,then in advance flash .zip nonsafe
3 restart my xt860,and still the 2.3.5 bra rom ..
sorry for my bad English ,and great thx
---------- Post added at 04:44 AM ---------- Previous post was at 04:29 AM ----------
Endoroid said:
(1.08d is tweaked to allow advanced user to flash over their nonsafe, for example I have both liberty and eclipse roms on my phone no stock at all)
Click to expand...
Click to collapse
all I want to know is how to ....thxxxxxxxxx

That's how it should be done
Last time I flashed my /systemorig was before 1.08d had been released so I did it co ming off a fresh fastboot flash using bootstrap to flash liberty, then installed safestrap. I haven't found a rom to replace liberty in my /systemorig yet so I haven't tried the advance flash yet. Sorry.
Sent from my XT860 using xda premium

newaxis said:
hi there ,i using 1.08d and try to flash willis111's bell 2.3.6 rom
Click to expand...
Click to collapse
Hi
i' desperate for willis111's bell 2.3.6 rom but can't download from rapidshar, there is a way you upload the file to non-repidsher site?
Thanks ahead

Planning to get back on OTA

So its been awhile since I flashed a ROM to my BIONIC. That was back before ICS was even released for the BIONIC. So I started looking at updating to one of the more stable ROMS that has way better performance that this stock one. Currently I have 6.7.232 on my phone and I would like advice on which ROMs are best for this device. I have looked into some such as Gameblur, Raging Bionic, and Icarus HD. Thus far I havent really decided on one but I have noticed that some of them are on Jelly Bean. I am not sure if I have to return to the OTA path to update to any of these. I also have Safestrap 3.11 installed. Any advice would be appreciated. thanks.

Any help out there?? Thanks.

HarielA4 said:
I have looked into some such as Gameblur, Raging Bionic, and Icarus HD. Thus far I havent really decided on one but I have noticed that some of them are on Jelly Bean. I am not sure if I have to return to the OTA path to update to any of these. I also have Safestrap 3.11 installed. Any advice would be appreciated. thanks.
Click to expand...
Click to collapse
Well Gameblur and Raging Bionic both require one to be on the 98.72.22 Moto 4.1.2 Jellybean update. Incarus HD however is ICS base and can be flashed with your current setup.
If you are destine to update your stock side I would first prep what you currently have on there right now. See this HERE for getting stuff ready.
I would backup anything on the internal storage before hand and make sure that you have a full battery.
You will find the proper FXZ files HERE. If you are on 6.7.2-223 update then use the one for 4.0.4. It would be easier to root again through the update process. After you have completed the restore processes and root through the HOB. Make sure you have VooDoo Root Keeper installed on your phone to back up Root and to disable Root. Then with a good Data connection you are going to take the update Via OTA. Once the update is complete and you are fully booted up. Use VooDoo to restore your Root and test using root explore or NoFrills CPU.

nobe1976 said:
See this HERE for getting stuff ready.
Click to expand...
Click to collapse
The link provided there has a post from the OP that states House of Bionic is discontinued and to use House of Moto. Should I do that?
Secondly I havent for sure decided which Rom I will be moving to. I feel that the interface I have been using is kinda laggy. I installed Next launcher to see if that made a difference and it was more responsive but still my system memory usage skyrockets after a couple hours and sometimes the only way to resolve it is to restart the device. Any recommendations as to which Rom I should move to?

HarielA4 said:
The link provided there has a post from the OP that states House of Bionic is discontinued and to use House of Moto. Should I do that?
Click to expand...
Click to collapse
You can try using the House of Moto stuff also depending on what you feel more comfortable on using. The HOM was desighned to have one interface for all Moto devices instead of each having its own individual setup. I would still use HOB for your purpose only because I don't know if he added in the script to root the device, which was made for ICS versions not JB hence the discontinued portion of it.
HarielA4 said:
Secondly I havent for sure decided which Rom I will be moving to. I feel that the interface I have been using is kinda laggy. I installed Next launcher to see if that made a difference and it was more responsive but still my system memory usage skyrockets after a couple hours and sometimes the only way to resolve it is to restart the device. Any recommendations as to which Rom I should move to?
Click to expand...
Click to collapse
I have tested and played around with a lot of different ROMs and tweaks to find the one that I am ultimately satisfied with. Flying Jelly, well the name speaks for itself, Rage, and GameBlur (which I had minor help in) all work fine for there purpose.. One must pick and choose which one suits there purpose. So my suggestion would be to install SafeStrap 3.60, which is the latest updated one, and create a few slots and run each the same as you would Stock or any other firmware to measure which one suits your needs.....

In a previous post you wrote "If you are on 6.7.2-223 update then use the one for 4.0.4.". I went to the FXZ site and it shows that the 4.04 rom has version 6.7.223 on it already. I already have root. Why would I need to install the same version again and reinstall root to get on the OTA. I just want to make sure I understand this to avoid making mistakes. Thanks.

Then if you feel confedent that all will go well then just install Voodoo to backup and disable root. Take the OTA update and see if it will install. The most that will happen is that if it detects that something is missing from the current firmware you have the installation process will fail and reboot back into what you currently have. At that point you will have to FXZ your stock back to the way it was installed originally, root, then backup root and disable, then take the OTA. ICS is way easier to root then JB. I have kept Root before via OTA when I got it, so I know it Voodoo will keep the backup and install it..

nobe1976 said:
Then if you feel confedent that all will go well then just install Voodoo to backup and disable root. Take the OTA update and see if it will install. The most that will happen is that if it detects that something is missing from the current firmware you have the installation process will fail and reboot back into what you currently have. At that point you will have to FXZ your stock back to the way it was installed originally, root, then backup root and disable, then take the OTA. ICS is way easier to root then JB. I have kept Root before via OTA when I got it, so I know it Voodoo will keep the backup and install it..
Click to expand...
Click to collapse
I think I miscommunicated what my question was. The instructions say to install the FXZ for the 4.0.4 that has the same version of Android OS that is currently installed. the further instructions say to install the OTA from verizon but everytime I check for an update nothing shows up on my phone. Where else can I get the OTA?
In addition I want to know what I should do about safestrap. Should I remove it before installing the OTA or is it fine to leave as is when I go to install the OTA?

OK... If you cannot even get Big Red to send you the update. You can fxz the update, but at that point you will loose root, but have the option to keep your current data. Go see House of Moto or House of Bionic over at droidrazr.com
As far as Safestrap I would just uninstall recovery through the app the reboot so it clears out before the fxz process.
$3π+ £®m€ ×X× BiOπI¢ oπ $ø|/|£ťhïñğ ¢ű$ț¤|/|

fyi I think he took House of Bionic down, didn't see a link. I can however attest that House of Moto worked perfectly fine. Flashed fresh .232 and VZW sent me the OTA (I tried voodoo rootkeeper before updating). I did lose root despite following all of the steps. To get it back your best bet is to boot up a live Ubuntu disc. I tried the VM that someone compiled but it kept failing.
PS: nobe1976, how the hell did you fit 3 ROMS on your phone? I can only fit one ROM (besides obviously stock). Wish we could install ROMs through safestrap to SD (internal or external).

mikemikemikexxx said:
fyi I think he took House of Bionic down, didn't see a link. I can however attest that House of Moto worked perfectly fine. Flashed fresh .232 and VZW sent me the OTA (I tried voodoo rootkeeper before updating). I did lose root despite following all of the steps. To get it back your best bet is to boot up a live Ubuntu disc. I tried the VM that someone compiled but it kept failing.
PS: nobe1976, how the hell did you fit 3 ROMS on your phone? I can only fit one ROM (besides obviously stock). Wish we could install ROMs through safestrap to SD (internal or external).
Click to expand...
Click to collapse
This is the Exploit I have been using the past few days.. HERE.
However Samuri didn't remove the HOB site, He just doesn't maintain it as much since HOM. Here is the LINK to that f needed.