Database Develop

HELP! I can't boot my tab and I can't get into recovery!

Step by step what I did:
I rooted my tab via this tutorial: http://forum.xda-developers.com/showthread.php?t=812367
I then installed bootstrap (http://forum.xda-developers.com/showthread.php?t=981307), and after going through the steps and restarting I can't get into recovery or anything. It just sits at the logo.
How do I just reset it to factory?

If I completly broke this I think I'm going to puke... Can somebody give me a little bit of hope or help?

obihann said:
Step by step what I did:
I rooted my tab via this tutorial: http://forum.xda-developers.com/showthread.php?t=812367
I then installed bootstrap (http://forum.xda-developers.com/showthread.php?t=981307), and after going through the steps and restarting I can't get into recovery or anything. It just sits at the logo.
How do I just reset it to factory?
Click to expand...
Click to collapse
1st question .. is your tab unlock ?
2nd if not , means you gonna reflash your stock rom again via odin
3th . maybe you can use P1_add_hidden.pit via odin and press start and maybe its work , but 80% its work if didn't work u have to go for step 2

k0sh said:
1st question .. is your tab unlock ?
2nd if not , means you gonna reflash your stock rom again via odin
3th . maybe you can use P1_add_hidden.pit via odin and press start and maybe its work , but 80% its work if didn't work u have to go for step 2
Click to expand...
Click to collapse
My tab is unlocked. So I'm going to have to reflash my stock rom using odin? Where is the best place to track down the froyo rom for my tab?

obihann said:
My tab is unlocked. So I'm going to have to reflash my stock rom using odin? Where is the best place to track down the froyo rom for my tab?
Click to expand...
Click to collapse
I just found these links which may help:
http://forum.xda-developers.com/showthread.php?t=889165
http://forum.xda-developers.com/showthread.php?t=888071
Am I correct these should help?

Obihannm, I did the same yesterday.
You need the original stock firmware for your galaxy and Odin for flash it again.
Look for sam firmware in the google to grab your stock kernel, tools and guides for recovery.
With luck and patience, it is possible ressurrect your tab, but It will back unrooted and maybe you get a locked bootloader.

Just go here and follow attached guide guide.

Thanks guys, I will be up late trying this for sure. I noticed that this probably should live within the QA area not Genreal, so if a Mod or Admin wants to move it, please do.

TheATHEiST said:
Just go here and follow attached guide guide.
Click to expand...
Click to collapse
That would end up with me having gingerbread correct? Should I try to first restore it to factory since right now I can't even enter recovery? Or is it a moot point and I may as well go forward get gingerbread on it?

k0sh said:
1st question .. is your tab unlock ?
2nd if not , means you gonna reflash your stock rom again via odin
3th . maybe you can use P1_add_hidden.pit via odin and press start and maybe its work , but 80% its work if didn't work u have to go for step 2
Click to expand...
Click to collapse
wait by unlocked do you mean rooted? it is rooted but that is it...

obihann said:
That would end up with me having gingerbread correct? Should I try to first restore it to factory since right now I can't even enter recovery? Or is it a moot point and I may as well go forward get honeycomb on it?
Click to expand...
Click to collapse
You dont need to enter any recovery at all. Just "download" mode.
Go and read the guide.

TheATHEiST said:
You dont need to enter any recovery at all. Just "download" mode.
Go and read the guide.
Click to expand...
Click to collapse
OK, a few deep breaths and some "reading" (a new concept for me it seems) later I think I have a bit of a better understanding.
So reading through the overcome guide and a few other threads I think my issue is I must have had a protected bootloader, and that bootstrap program would have frigid that up (there probably was a warning if I slowed down). So that means my issue is my bootloader... Am I correct thus far?
If this is true, does this mean my current rom is actually fine, and fixing my bootloader is my #1 goal?
From there I can insteall the overcome rom, the normal gingerbread rom, or go back to stock? As I see it overcome/gingerbread is the best option.

Just install the stock rom, once back to normal if you have a locked bootloader patch it
All that you need in one handy page
http://forum.xda-developers.com/wiki/index.php?title=File:SamsungGalaxyTab.png

TheATHEiST said:
You dont need to enter any recovery at all. Just "download" mode.
Go and read the guide.
Click to expand...
Click to collapse
I read through the guide you linked to as well as this one (http://forum.xda-developers.com/showthread.php?t=1078622). You suggest I only need to access "download" mode, which I discovered how to do last night. Should Heimdall or other applications be able to see my device via download mode? Or is there a step I am missing.
As well I noticed in the guide you linked me it references patching the bootloader if it is locked, do I need to patch my bootloader or replace it completely as it seems to be broken?
I want to learn this stuff, this I read, and now I am asking. Again all help is appreciated.

Heimdall doesn't seem to do anything at all. I followed the guides as I best understood, and when it came time to hit the start button it instantly said completed with no actual results...
Any ideas?

a coworker was nice enough to help me out, using the stock rom with an unlocked bootloader he was able to bring it back for me. I'm now running froyo, rooted, and a unlocked boot loader so I should have no issues putting overcome on it.

Noob HELP! : Softbricked my GTAB 8.9 GT-P7300... :(

First off, I'd like to thank everyone for their very useful posts! I 'kinda' understand now what everyone here is talking about...Kinda...
Anyway, I just bought my 8.9 around two weeks ago and decided to upgrade my OS to 3.2. I tried it through Kies, but Kies was not able to recognize my device, tried OTA update but was not able to connect to server...So I tried manually updating it myself, and now, based on what I read here, I think I softbricked my GTAB...The boot screen keeps loading and it does not want to push through...
My TAB is not rooted, and based from the threads that I have read here, i need to root my TAB first but unfortunately, I could not do that anymore..
Can someone please help me out? Noob here...Would really appreciate a step-by-step Noob guide on how to fix my tab...Thank you so much in advance!

JRV78 said:
First off, I'd like to thank everyone for their very useful posts! I 'kinda' understand now what everyone here is talking about...Kinda...
Anyway, I just bought my 8.9 around two weeks ago and decided to upgrade my OS to 3.2. I tried it through Kies, but Kies was not able to recognize my device, tried OTA update but was not able to connect to server...So I tried manually updating it myself, and now, based on what I read here, I think I softbricked my GTAB...The boot screen keeps loading and it does not want to push through...
My TAB is not rooted, and based from the threads that I have read here, i need to root my TAB first but unfortunately, I could not do that anymore..
Can someone please help me out? Noob here...Would really appreciate a step-by-step Noob guide on how to fix my tab...Thank you so much in advance!
Click to expand...
Click to collapse
Is this a 3G or Wi-Fi only model?
Sent from my GT-P7310

3G model...

JRV78 said:
3G model...
Click to expand...
Click to collapse
To restore functionality (and I mean to enter the ROM itself) you must use ODIN. There are several images to select in the Development forum for your 7300 unit. A how-to use it is also available in my signature's guide. Don't worry about your SDcard contents, ODIN doesn't touch them, but it does delete the apps.

ok, i tried odin3 v1.85 and I downloaded a stock rom from sammy thats suppose to be compatible for my region. ODIN status was fail after a few seconds and I got a 'binary' error message in my TAB.
I'll try and read your how-to use now..
My tabs not rooted...will that be a problem?

JRV78 said:
ok, i tried odin3 v1.85 and I downloaded a stock rom from sammy thats suppose to be compatible for my region. ODIN status was fail after a few seconds and I got a 'binary' error message in my TAB.
I'll try and read your how-to use now..
My tabs not rooted...will that be a problem?
Click to expand...
Click to collapse
No, root is independent of the device's bootloader, so no, it is not related. You can try any image as long as it's 7300.

sorry, noob question...when you say 'image', your talking about the .tar file right? so as long as its 7300, it should work?
i have the: P7300XWKK5_P7300ODDKJ1_P7300XXKJ6_HOME.tar.md5

IT WORKED!!!!!!!
Thanks nirogu325!!! I will spread the word!!!

JRV78 said:
sorry, noob question...when you say 'image', your talking about the .tar file right? so as long as its 7300, it should work?
i have the: P7300XWKK5_P7300ODDKJ1_P7300XXKJ6_HOME.tar.md5
Click to expand...
Click to collapse
Yes, the biggest-size file.
JRV78 said:
IT WORKED!!!!!!!
Thanks nirogu325!!! I will spread the word!!!
Click to expand...
Click to collapse
No worries. Good to know it worked! Enjoy!

[Q] How to root galaxy note GT-N7000BDULB3 version

Hello xda developers
I am wondering if someone can answer a few questions i have about rooting my samsung note?
I'm in Australia and just got my note with vodafone on Saturday. I have been doing some searching in the dev section and I haven't found my kernel version (2.6.35.7-N7000BDULB3-CL977082) to download from dr.ketan I have also searched for it on sammobile.com with no luck also.
So from the above statement does anyone know where i can get a copy of it from or know how i can backup mine from my phone atm?
I have found a root solution however It is for the GT-N7000 model which is at rootgalaxynote.com/galaxy-note-root/how-to-root-galaxy-note-gt-n7000-method-2odinheimdall
If I followed this above method would I end up bricking the phone as the phone version are different? I found nothing on a search when comparing the two
Sorry for an the essay of a post too.

Looks like you're the only guy in the whole wide world with the exotic N7000BDULB3 GB, mate.
https://www.google.com/search?client=opera&rls=en&q=N7000BDULB3&sourceid=opera&ie=utf-8&oe=utf-8
Anyway, you can always flash and root and older Rom, then upgrade to whatever you want whilst keeping your root. Here's a little guide to downgrading and rooting I wrote some time ago, hope it helps.
You'll have a rooted KK9 rom after you're done. Then you can download any new GB version (LC1 is the latest) from here and flash it with Mobile Odin, with Everroot and Inject Superuser options ticked. That will keep your root.
Good luck.

chasmodo said:
Looks like you're the only guy in the whole wide world with the exotic N7000BDULB3 GB, mate.
https://www.google.com/search?client=opera&rls=en&q=N7000BDULB3&sourceid=opera&ie=utf-8&oe=utf-8
Anyway, you can always flash and root and older Rom, then upgrade to whatever you want whilst keeping your root. Here's a little guide to downgrading and rooting I wrote some time ago, hope it helps.
You'll have a rooted KK9 rom after you're done. Then you can download any new GB version (LC1 is the latest) from here and flash it with Mobile Odin, with Everroot and Inject Superuser options ticked. That will keep your root.
Good luck.
Click to expand...
Click to collapse
Thanks for your help I will try it as soon as I get some more free time.

I have read your post y'day, but have not replied b'coz, i was waiting for input.
As you have describe method is not safe, It will give you raise flash counter
here is review of one user from thread you have mentioned.
raj says:
March 26, 2012 at 9:42 pm
Thanks so much, and your posts are one of the easiest to follow and gives a great head start for noobs! Great Job really!
I used this method and now I see a yellow triangle.
1. Will this yellow triangle during boot up, disappear if I follow your unroot method?
2. Will my phone can be updated to ICS once Samsung officially provides upgrade to ICS for Galaxy Note?
3. I tried SetCPU, the phone became very hot, when I over clocked and it just hang. I brought it back to normal.
4. What are all the other useful, important things we can do after root, other than installing Titanium Backup etc.
Click to expand...
Click to collapse
So just follow what chasmodo have advised you.

dr.ketan said:
I have read your post y'day, but have not replied b'coz, i was waiting for input.
As you have describe method is not safe, It will give you raise flash counter
here is review of one user from thread you have mentioned.
So just follow what chasmodo have advised you.
Click to expand...
Click to collapse
Thanks for all the input really appreciated, will let ya know how i go on the weekend when i have some time to do it

chasmodo said:
Looks like you're the only guy in the whole wide world with the exotic N7000BDULB3 GB, mate.
https://www.google.com/search?client=opera&rls=en&q=N7000BDULB3&sourceid=opera&ie=utf-8&oe=utf-8
Anyway, you can always flash and root and older Rom, then upgrade to whatever you want whilst keeping your root. Here's a little guide to downgrading and rooting I wrote some time ago, hope it helps.
You'll have a rooted KK9 rom after you're done. Then you can download any new GB version (LC1 is the latest) from here and flash it with Mobile Odin, with Everroot and Inject Superuser options ticked. That will keep your root.
Good luck.
Click to expand...
Click to collapse
This might be a stupid question chasmodo so bare with me.
With the KKA firmware when extracted I get the 2 files like you said the .tar.md5 and the dll file.
In odin do i just select the .tar.md5 file under the pda option? or do i have to put the dll file in an option as well.

mattybxda said:
In odin do i just select the .tar.md5 file under the pda option? or do i have to put the dll file in an option as well.
Click to expand...
Click to collapse
Just load .tar.md5 in PDA and you're good to go.

chasmodo said:
Just load .tar.md5 in PDA and you're good to go.
Click to expand...
Click to collapse
Just tried it and it FAILED please help?

mattybxda said:
Just tried it and it FAILED please help?
Click to expand...
Click to collapse
Ok so Im trying to flash to the new UK firmware now and see if it loads up if it does i will try replace the kernel to get root that way and report back.

mattybxda said:
Ok so Im trying to flash to the new UK firmware now and see if it loads up if it does i will try replace the kernel to get root that way and report back.
Click to expand...
Click to collapse
Didnt work guys , any ideas on what i can do now.

dr.ketan said:
I have read your post y'day, but have not replied b'coz, i was waiting for input.
As you have describe method is not safe, It will give you raise flash counter
here is review of one user from thread you have mentioned.
So just follow what chasmodo have advised you.
Click to expand...
Click to collapse
Hi dr ketan
Have you got any advice for me im stuck atm, my downgrade didnt work :'( it fails at the kernel part is there away around this?

mattybxda said:
Hi dr ketan
Have you got any advice for me im stuck atm, my downgrade didnt work :'( it fails at the kernel part is there away around this?
Click to expand...
Click to collapse
Do you have Sammy drivers installed on your PC? This is important. From Dr Ketan's guide:
"Install Kies on your computer, connect your phone and make sure that all the drivers installed correctly."

chasmodo said:
Do you have Sammy drivers installed on your PC? This is important. From Dr Ketan's guide:
"Install Kies on your computer, connect your phone and make sure that all the drivers installed correctly."
Click to expand...
Click to collapse
Yeh i have kies on the computer, all was working when i was using kies before.
I
'm tried a different firmware version now so once it downloads i hope it works fingers crossed anyways. If that doesnt any more ideas?

mattybxda said:
Yeh i have kies on the computer, all was working when i was using kies before.
I
'm tried a different firmware version now so once it downloads i hope it works fingers crossed anyways. If that doesnt any more ideas?
Click to expand...
Click to collapse
Yeah...try a different PC Odin version if it fails again.

chasmodo said:
Yeah...try a different PC Odin version if it fails again.
Click to expand...
Click to collapse
Thanks I will try that now I think i am also going to try uninstalling Kies then reinstalling it just as a per-caution. Will let ya know how i go.

mattybxda said:
Thanks I will try that now I think i am also going to try uninstalling Kies then reinstalling it just as a per-caution. Will let ya know how i go.
Click to expand...
Click to collapse
Also make sure that Kies is not running when you are PC Odining (ctrl+alt+del+end process).

chasmodo said:
Also make sure that Kies is not running when you are PC Odining (ctrl+alt+del+end process).
Click to expand...
Click to collapse
Thanks for the tip before about the process seemed to get further now.
Problem now it seems to be getting stuck at setup connection in odin?
the set that seems to be stuck is the setupconnection... should i just close odin and re-try?

mattybxda said:
Thanks for the tip before about the process seemed to get further now.
Problem now it seems to be getting stuck at setup connection in odin?
the set that seems to be stuck is the setupconnection... should i just close odin and re-try?
Click to expand...
Click to collapse
Did you start Odin first, then plug your Note into USB slot? Does Odin show the yellow field with the COM number in it?

chasmodo said:
Did you start Odin first, then plug your Note into USB slot? Does Odin show the yellow field with the COM number in it?
Click to expand...
Click to collapse
I have got the yellow com box wich on my computer says com4.
using odin v1.87 instead odin 1.85 like before.
using the firmware like u suggested to downgrade too as well.
seem to fail when it goes to boot.ini and the kernel section just fails there?
Think I should try flash a kernel or something?

mattybxda said:
I have got the yellow com box wich on my computer says com4.
using odin v1.87 instead odin 1.85 like before.
using the firmware like u suggested to downgrade too as well.
seem to fail when it goes to boot.ini and the kernel section just fails there?
Think I should try flash a kernel or something?
Click to expand...
Click to collapse
Don't know what else to suggest at this point. I'd leave it as it is and wait for Dr. Ketan to bail you out.
@Dr. Ketan:
Mum, help us, we're stuck here!

[Q] Help. Device [SM-G900A] stuck in Black-and-Blue bootloop and soft brick.

This is common for failure when modifying firmware with Odin. Black-and-Blue is what I call the error. My screen has gone black after a failure after the color Samsung animation, and the blue boot light is looping. I tried following instructions on how to un-brick it. They are all the same though. Odin, firmware. But what had caused the problem was this exactly. I need a way to fix this. Unless it is just easier to bring it in for maintenance. (I have not tripped Knox as I was only installing Firmware.) I cannot connect to Kies. I can access Stock Recovery and download mode. Can anyone suggest anything different than this method?
I am a new user at XDA but I am not new to Android or the Forums. I know many things, so you don't have to be too lament.
ALL HELP IS GREATLY APPRECIATED, AS I MUST HAVE THIS SOLUTION BY 2 DAYS

ElectricBiskitz said:
This is common for failure when modifying firmware with Odin. Black-and-Blue is what I call the error. My screen has gone black after a failure after the color Samsung animation, and the blue boot light is looping. I tried following instructions on how to un-brick it. They are all the same though. Odin, firmware. But what had caused the problem was this exactly. I need a way to fix this. Unless it is just easier to bring it in for maintenance. (I have not tripped Knox as I was only installing Firmware.) I cannot connect to Kies. I can access Stock Recovery and download mode. Can anyone suggest anything different than this method?
I am a new user at XDA but I am not new to Android or the Forums. I know many things, so you don't have to be too lament.
ALL HELP IS GREATLY APPRECIATED, AS I MUST HAVE THIS SOLUTION BY 2 DAYS
Click to expand...
Click to collapse
Head down to this thread http://forum.xda-developers.com/att...to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120 and scroll down to the notes section and download the G900A_Downgrade_to_NCE.tar. Boot into download mode and flash using the pda slot in ODIN. Take both OTA's and youll be back on latest stock firmware.

Thanks
Thanks for responding. I have gotten it fixed. I installed an older kernel.

ElectricBiskitz said:
Thanks for responding. I have gotten it fixed. I installed an older kernel.
Click to expand...
Click to collapse
I've got the same problem. Do you mind sharing some details on how you got the older kernel?

Yes
ElectricBiskitz said:
Thanks for responding. I have gotten it fixed. I installed an older kernel.
Click to expand...
Click to collapse
Go to this linked site -> http://forum.xda-developers.com/att...to-root-g900aucu2aoa1-4-4-4-2-3-2015-t3021120
Here you'll find how to root. Go to the troubleshooting section and download a tar called G900A_Downgrade_to_NCE.tar to your computer. Then inject to AP in Odin.
Hope this will work! ?

Stuck on the black screen - power on doesn't work, only Recovery and Download works

Hello.
I've been playing with some custom ROMs, recoveries, etc. on S10 SM-G973F. Every time something went wrong I was able to flash stock Android 11 ROM with Odin and run the system after that. But not anymore...
At this moment I have access to Recovery Mode (stock, TWRP, LineageOS... whichever I flash with Odin) and Download Mode. When I try to power on the phone with button or with an option Boot to System from Recovery the phone turns off and nothing else happens. Black screen only, no vibration, etc.
I tried to format data and cache in Stock Recovery and TWRP. I tried to flash many time, changed USB cable, change USB port... nothing helps.
What is strange that after I flash the stock recovery the phone boots one time displaying the unlocked bootloader warning, Samsung logo and Android robot icon with an Erasing sign... but just for a 1-2s, very short time. Before the problem occurred the Erasing took much much more time. After that one time I cannot make to display bootloader unlocked warning and Samsung logo any more, no matter which ROM or recovery I flash.

Maybe you can try installing the original firmware and start over again.

That is what I do in the first place, I try to flash the original firmware with Odin. I use the same files as before. The only difference I can see is that after the flashing the Erase progress was very long and now it is only 1-2s and the phone turns off.

Ok, I've found my mistake and a solution. I will post it here if anyone else has a similar problem.
So while I was playing with different ROMs one of them had an instruction to flash G973FXXSCFUH5-twrp_flashable.zip that included:
modem.bin
dt.img
dtbo.img
cm.bin
sboot.bin
up_param.bin
keystorage.bin
uh.bin
The zip included was to an older firmware G973FXXSCFUH5, while I was already on newer G973FXXSEFUJ2. But the TWRP that I used to flash the zip did not protest and the process finished well. Causing the problems above of course.
Don't know why but flashing the whole original G973FXXSEFUJ2 firmware with Odin was not enough. But when I flashed G973FXXSEFUJ2-twrp_flashable.zip from the TWRP worked and made the phone operational again.

hello, I am in the same situation after having wanted to install blastui I find myself with the possibility of starting only in dow load or in twrp. Can you help me

FabienGege said:
hello, I am in the same situation after having wanted to install blastui I find myself with the possibility of starting only in dow load or in twrp. Can you help me
Click to expand...
Click to collapse
0. Make sure your phone is charged!
1. Check your current SW# in Download mode (the number stands for the number or letter in firmware code, the 5th sign from the end in hexadecimal, for example SW# 14 is E in G973FXXSEFUJ2_G973FOXMEFUJ2)
2. Find the proper version of bootloader and modem in ....-twrp_flashable.zip format (check here: https://github.com/corsicanu/9820-bootloaders_and_modems/releases)
3. Flash and run TWRP recovery.
4. Flash the zip file from #2.
Flashing the stock firmware with Odin was not enough for me. Flashing with TWRP made the S10 back to alive.

.

Doman said:
0. Make sure your phone is charged!
1. Check your current SW# in Download mode (the number stands for the number or letter in firmware code, the 5th sign from the end in hexadecimal, for example SW# 14 is E in G973FXXSEFUJ2_G973FOXMEFUJ2)
2. Find the proper version of bootloader and modem in ....-twrp_flashable.zip format (check here: https://github.com/corsicanu/9820-bootloaders_and_modems/releases)
3. Flash and run TWRP recovery.
4. Flash the zip file from #2.
Flashing the stock firmware with Odin was not enough for me. Flashing with TWRP made the S10 back to alive.
Click to expand...
Click to collapse
Hello brother can you please explain it again to me? My English is terrible and i hope you understand that.

Mohammed_9564 said:
Hello brother can you please explain it again to me? My English is terrible and i hope you understand that.
Click to expand...
Click to collapse
There is not much more to explain, just follow the steps I pointed. If any of them are not clear enough just ask, but I tried to make them as simple as possible If your English is not to well just try to use Google Translator.

Doman said:
There is not much more to explain, just follow the steps I pointed. If any of them are not clear enough just ask, but I tried to make them as simple as possible If your English is not to well just try to
Doman said:
There is not much more to explain, just follow the steps I pointed. If any of them are not clear enough just ask, but I tried to make them as simple as possible If your English is not to well just try to use Google Translator.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Oh man Thanks a lot for your reply i actually managed to do it 2 days ago and it worked thanks to your help again, but i have another question if it's not too much trouble for you, how can i go back to the stock room ? Can i just do it via Odin or is there another way to do it.

Mohammed_9564 said:
Oh man Thanks a lot for your reply i actually managed to do it 2 days ago and it worked thanks to your help again, but i have another question if it's not too much trouble for you, how can i go back to the stock room ? Can i just do it via Odin or is there another way to do it.
Click to expand...
Click to collapse
Best way to go back to stock rom is simply flash it with Odin from original files available from Samsung, for example on SamMobile:
https://www.sammobile.com/samsung/galaxy-s10/firmware/#SM-G973F

Doman said:
Best way to go back to stock rom is simply flash it with Odin from original files available from Samsung, for example on SamMobile:
https://www.sammobile.com/samsung/galaxy-s10/firmware/#SM-G973
Click to expand...
Click to collapse
Thanks for the help brother I appreciate it

For months I've tried searching for a solution to fix my SM-N976U that stopped booting up. None of the symptoms shared fully matched what I was experiencing, so every fix I attempted didn't get her fully functioning again, eventually I gave up trying, stuffed the phone in a drawer and just bought another one. Today I stumbled upon your post and every symptom you described fit exactly with what happen to me, I mean to the T, minus the model and fw version. So I grabbed my SM-N976U one more time and followed your solution... and guess what??? I am now a proud owner of 2 note 10 plus'!!!
Thank you so much for taking the time to share your experience and solution!! Cheers to you bud! Have a great New Year!

Thank you~! my s10 plus is back!