ok so heres the deal. i already have the file downloaded via the updater in the settings already to get installed. but i used rom toolkit to modify my status bar and install a custom bootanimation as well as a few other things like that. do i have to use rsd lite and a full 902 fxz file to do a full sweep and clean recovery before installing 905? also does it require me to uninstall safestrap? i'm not entirely sure if anyone else has answered these questions as i don't know if anyone else has done these kind of things before upgrading to 905. i plan on installing the ICS leak after installing 905 thats why i wish to know these things as i'd rather not screw up my phone after i've put so much time and effort into making it the way i want it you know? OH one other question! i know that the ICS leak is rootable does that mean safestrap is also ICS leak friendly?
I believe you should be able to just run the update and the Bionic will reboot into stock recovery. I would create a nandroid just to be safe so you can restore if something goes wrong. I read somewhere that the ICS leak requires you to eliminate safestrap though I am not sure if that is true or not.
I decidex to go thd longer safer route of rsd lol. But i rooted the leak and safestrapped it and it still works so yay!!!! Lol
Sent from my DROID BIONIC using XDA
So you can successfully dual boot with safe strap on the leak? Great to hear!
I think I bricked my Bionic and need help :crying:
I was running 905 perfcectly and wanted to upgrade to ICS 230 leak so I did a nandroid with bootstrap.
I followed instructions and everything went perfectly, I had my ICS running very good (with full root and all) but I wanted to go back, since I wasm't productive enough with the new layouts and stuff so I installed Bootstrap and retored my old nandroid backup... BIG MISTAKE. The restore went ok, but when rebooting it stuck in a blank screen (for 30 minutes) until I decided to reboot it. and same thing. From there I can't go ahead. I've tried to glash back to 905 and even ICS (from stock recovery) with the Status 7 error, I started in fastboot and tryied RSDLite to go to stock 902 and failed (Failed flashing process. 1/22 flash mbm "allow-mbmloader-flashing-mbm.bin" Phone returned FAILED) and nothing seems to work.
Any helps or ideas are welcomed, I think I might have bricked it bad.....
Trying to restore a Gingerbread nandroid over ICS leak is a bad idea.
Did you get your phone fixed?
If not, PM me and I will get you back on track...I hope.
eye__dea said:
Trying to restore a Gingerbread nandroid over ICS leak is a bad idea.
Did you get your phone fixed?
If not, PM me and I will get you back on track...I hope.
Click to expand...
Click to collapse
I know.. newbie mistake!!!
I did something like that my self. I have been flashing stuff since the original droid. I messed up and didnt do a backup in recovery. I ended up flashing back to stock .902 using rsd and doing the whole process again. Good luck hopefully you have it fixed by now.
Try RSDlite again with a fully-charged battery, low battery level has been the major cause of flash failures on the Bionic
Note that you won't be able to charge with a bricked Bionic, you either need a wall charger, ask someone to do it for you, or buy another battery from Verizon.
I'd say get to 100% with a wall charger, then FXZ to 902, then apply the 905 update (via OTA or from SD in stock recovery, root, backup with OTA root keeper, then apply the newest leak (232). You should have a fully working phone, but if you wanna go back to the gingerbread stuff, DO NOT flash the leak. Whatever ROMs you use must be made for whatever stock OS version you have. If it's made for 902 or 905 it won't work after you've updated to ICS. If the ROM is made for 2233 or 230 or 232 and so on, it won't work until you've updated the stock OS to one of those builds, or just an ICS build in general (most likely).
You can go back to 902 from any of the leaks.
Sent from my DROID BIONIC using Tapatalk 2. Running 232 currently.
I have had only one time bricking my bionic.
I was on a cross country flight and ran my battery down to not be able to flash. I was also unable to charge my phone because I had just deleted everything from stock recovery (my first problem). RSD would not work because I had no charge on my phone, and Nothing I did would charge my phone. I know nobody else that owns a bionic so they could charge my battery.
I went to Verizon and explained some bull**** story of my phone just not turning on and they were willing to send me a refurbished phone. I asked if it was at all possible for them to trade me batteries for my Bionic. He allowed me to trade batteries from the store model and came home flashed .902 with RSD Lite and have had no problems since.
I recently downloaded and installed ICS 6.7.2231 from my SD on my Bionic and everything went flawlessly. Was wondering if there if there is a way to go back to stock .902 or .905 GB, and how can I put a newer version of ICS on my Bionic without screwing it up. I am fairly computer and phone knowledgable but am a little new to flashing and installing from SD, and not completely sure what FXZ is or how to do it.
Thanks for your help:fingers-crossed:
dawg799
dawg799 said:
I recently downloaded and installed ICS 6.7.2231 from my SD on my Bionic and everything went flawlessly. Was wondering if there if there is a way to go back to stock .902 or .905 GB, and how can I put a newer version of ICS on my Bionic without screwing it up. I am fairly computer and phone knowledgable but am a little new to flashing and installing from SD, and not completely sure what FXZ is or how to do it.
Thanks for your help:fingers-crossed:
dawg799
Click to expand...
Click to collapse
There are several good links all over this forum with detailed instruction is on how to fxz your Bionic back to 902. That is what you will need to do, then you Cancun update to 905 again and flash 232 in stock recovery if you would like.
http://forum.xda-developers.com/showthread.php?t=1729929
That link has all the files you need to FXZ back to 902 and update to 905. Then you can just follow the steps and replace that leak file and use which ever you like.
http://forum.xda-developers.com/showthread.php?t=1507798
That link has step by step instructions on how to fxz your phone. Both of those link were found on these forums, just search a bit next time and you will find your answers.
Yesterday i flashed if i remember the 223 leak. I flashed from 905, rooted with razor ics root. I went in to sqlite and changed the setting to get the free hotspot and than rebooted. Now on my top banner the wifi icon and my signal icon stay gray! They never got to blue! I have data service but the are always gray. Also later my signal strength went noticeably lower than before i flashed! Any help would be great! ...... also i just noticed that my browser is talking! Had chrome installed, couldn't find anything in the settings so i uninstalled and went to reinstall. Play store says that NOW its not compatible with my device! And now my stock browser is talking to me! PLEASE HELP!!!!!!
Sent from my DROID BIONIC using xda app-developers app
One thing at a tine.
Browser talking - check you're accessibility settings, see if Talkback is enabled.
For the GNow, that does not come with the ICS leaks. Either you installed an unofficial leak, or you installed GNow before the leak, or you installed it after the leak. There is a thread in XDA that details how to get GNow working in ICS.
For the sqlite mod, change the string back. Foxfi is free, doesn't require root, and works.
Sent from my rooted BIONIC running ICS 6.7.235 via Tapatalk 2
Thanks, I FXZed back and reloaded everything no sqlite no root and everything seems good! Still lost data for a while last night but l don't have great service at home! Might root later today, we'll see!
Sent from my DROID BIONIC using xda app-developers app
I do have one more question! If i go from .233 can i just flash .235 or do i need to FXZ again?
Sent from my DROID BIONIC using xda app-developers app
Each time you try to flash a new ics leak you HAVE TO FLASH BACK TO 902/905
if you flash to 235 YOU CAN NOT FLASH BACK TO 902/905 but you can only move foward
I recommend you stay on 232 unless you dont care about flashing back to gb
bhp117 said:
Each time you try to flash a new ics leak you HAVE TO FLASH BACK TO 902/905
if you flash to 235 YOU CAN NOT FLASH BACK TO 902/905 but you can only move foward
I recommend you stay on 232 unless you dont care about flashing back to gb
Click to expand...
Click to collapse
If people are going to keep stating this, then they need to qualify it with the fact that you can still install GB roms on the safe side. You can even put .905 stock back on safe or unsafe using the backup restore within Safestrap (if you have the stock .905 backup file that is). There's a lot of scare about .235, but all you have to do is change how you flash and you don't "lose" anything. **Wonder if I will have to make another tutorial for people on .235...goodness**
What? We have a locked boot loader... can't run .235 on one side and .905 on the other lol
What he said was correct.. you cannot use RSD lite to fxz back to .902/.905 with .235 so unless you're a fool don't make the move... 232 is great
Finally Iced Out Legitimately... Bionic is back
You cannot go back to fully stock Gingerbread anything once you flash .235 so for the sake of newer users being thrown off the upgrade path and not being able to FXZ back to .905 we all should just leave it at that.
cnorman76 said:
I do have one more question! If i go from .233 can i just flash .235 or do i need to FXZ again?
Sent from my DROID BIONIC using xda app-developers app
Click to expand...
Click to collapse
I think you've gotten the gist of the info, but I'll reiterate.
You have to be on .905 to flash any of the current ICS leaks (and there is a 99% chance of that being true with any future leaks / soak tests / final OTA b/c .905 is the current official OS version for the BIONIC.
You can flash .235 off of .905, but once you are in .235, you cannot restore your phone to .905 via FXZ, and you cannot try to fool the system with a simple Nandroid backup of .905 that you restore over .235. The reason is that the update script also looks to patch several things.
First of all, no update script ever includes the boot.img of the version that is being installed. It includes a patch file that requires you to have either the boot.img of the system that you are coming from, or the system that you are going to. Any other version and it throws up an error and does not allow the update to continue. IOW, if, say, leak .241 comes out, and you're on .235, you have no way to getting .241 without using a method to make the .241 kernel. You cannot flash the .905 kernel onto a .235 system - it trips eFuse and bricks the phone. You have no .241 kernel to install b/c, as I said, the update only includes a patch file, not the full kernel.
Second, even provide that you pass that (which in theory you might as you are on a .235 leak with only .905 /system restored from a Nandroid backup, and if the new leak uses the exact same kernel you'll pass), it also verifies every file in /system that it is going to patch, along with every file in /preinstall that you are going to patch. Restoring that Nandroid backup does wonders for having the .905 /system on your phone, but the current leak you are on has already patched several files in /preinstall, so those signatures will not match, and you'll fail the verification step, and ultimately the update will fail.
For the record, a typical FXZ flashes 17 different partitions on our phones. Nandroid backups on the BIONIC typically can only make backups of 3-4 of those partitions. We have figured out ways to grab a few more of them, but we are still stuck at grabbing a couple of them, and there are 4-5 that we cannot grab from our phones at all.
Since the folks with RAZRs went through something very similar in May and June, mattlgroff figured out a way to fool the update into thinking you have all the components correct in place that need to be there, and the update proceeds. Thus far, after bricking my phone trying to FXZ back to .905 / .902, I used a script to get back on .235, then verified that the move to reinstall the .235 leak works. If another leak is found, then I can test the second part of the script, that which allows new leaks to be installed. The script does not allow any older ICS leak to be installed, and currently there is no way to go back to a previous leak nor a previous GB stock FXZ at all. Even if we had a .223X ICS FXZ or a .22X ICS FXZ or a .230/.232 FXZ, they would not work on a phone that has been updated to .235.
That is why we're saying hold off unless you're 100% positive you're willing to accept the risk - this is way beyond the risk associated with rooting your phone. If Motorola makes the next leak force the phone to have components from .905 that we cannot flash into a .235 upgraded phone, I (and several others that have taken the plunge) might be permanently stuck on .235 until an FXZ for a version of ICS higher than or equal to .235 is released. And that typically takes 6-8 weeks.
HTH
crobs808 said:
If people are going to keep stating this, then they need to qualify it with the fact that you can still install GB roms on the safe side. You can even put .905 stock back on safe or unsafe using the backup restore within Safestrap (if you have the stock .905 backup file that is). There's a lot of scare about .235, but all you have to do is change how you flash and you don't "lose" anything. **Wonder if I will have to make another tutorial for people on .235...goodness**
Click to expand...
Click to collapse
Make a guide if you will and state the proper steps to do so
I had one issue with. 232. I noticed the lock screen is useless. My home button unlicked the screen plus the notification bar scrolled down to unlock also lol. Other that that it amazing
Sent from my DROID BIONIC using xda app-developers app
dblkspecial said:
I had one issue with. 232. I noticed the lock screen is useless. My home button unlicked the screen plus the notification bar scrolled down to unlock also lol. Other that that it amazing
Sent from my DROID BIONIC using xda app-developers app
Click to expand...
Click to collapse
i noticed that the other day when I got a text while my screen was locked. I naturally pulled the notification bar down and noticed that I didn't unlock my phone at first. Tried it just now and it's unlocking without swiping to unlock. My home button doesn't do anything howerver.
hey guys im on ics leak woke up this mornign phone passes motorola dual core boot and then goes to black screen.
phone can get into fastboot and even stock recovery but nothing else past that. any help? tried house of bionic with no
go. i was on .235 leak. olease help i really need a working phone
The .235 leak cannot be flashed back to .905 with RSD Lite or anything. In addition, you probably can't re-flash .235 in stock recovery. Your phone is bricked until an ICS FXZ is released, as far as I know.
Actually I fixed it today. Took SD card out loaded leaked rom direct to SD card and then loaded in stock recovery thank god I got out of that trouble.
Sent from my DROID BIONIC using xda app-developers app