Hey, everyone.
I just bought an ATT Samsung Focus S i937 off of eBay. It was locked when I received it, so I plunked down 25 bucks and unlocked it. I'm using it on Telus and so far all is well, except for WiFi connection sharing/tethering.
When I try to enable internet sharing, I get a message saying "Connection not shared. To enable tethering on this device go to (ATT's website) or dial 611."
Basically, it sounds like I need to have an ATT tethering plan to enable this on my phone, but since I'm not an ATT customer, there's not mch I can do.
I was wondering if there is a workaround for this. Please let me know!
Thanks,
Taylor
TaylorofCanada said:
Hey, everyone.
I just bought an ATT Samsung Focus S i937 off of eBay. It was locked when I received it, so I plunked down 25 bucks and unlocked it. I'm using it on Telus and so far all is well, except for WiFi connection sharing/tethering.
When I try to enable internet sharing, I get a message saying "Connection not shared. To enable tethering on this device go to (ATT's website) or dial 611."
Basically, it sounds like I need to have an ATT tethering plan to enable this on my phone, but since I'm not an ATT customer, there's not mch I can do.
I was wondering if there is a workaround for this. Please let me know!
Thanks,
Taylor
Click to expand...
Click to collapse
firstly DO NOT INSTALL THE SAMSUNG UPDATE!! and if updating the OSan have it unlocked already read This Website and use the relock prevent + edit your hosts file
Absolutely back up your device at every stage using This Guide
So follow these steps
unlock the device Here follow the instructions which includes installing the diagnostic tool and install XAP deployer or XAP handler Here or Here With the XAP file deployer in the WP7 SDK
Then install WP7 Root Tools Here
Then install WP Bazaar market Here
Open Root Tools, and give Bazaar higher level privileges
Find WinTT on the Bazaar market and install it
Open Root Tools, and give WinTT higher level privileges
you may need to restart to get WinTT working
go through WinTT and turn on ICS
Done
Wow thanks.
That's very complete. One questions though... I didn't mention this, but I am a registered WP7 dev and can unlock this device using my dev access. Can I load any of the XAPs directly instead of having to crack my phone?
Thanks,
Taylor
Yeah, you have limited access to installing xaps, but you will still need to interop unlock and use root tools to give higher level access to WinTT, so your best starting from scratch,
Sent from my SGH-i937 using XDA Windows Phone 7 App
Unable to understand the process
I have purchased an Samsung Focus S i937 locked to AT&T. I have purchased an unlock code and have successfully unlocked my phone. Im also unable to use the Internet Sharing feature of my phone. Firstly, I am not a technical guy hence im unable to understand the process stated by you. Secondly, I wanted to find out that does following the process given by you, expose my device to get BRICKED as I am able to understand that involved a JAIL BREAK of the device. Does it have any other side effects.? Like effecting the radio signals or any other such problem.
Thanks
abhijeetmohan06 said:
I have purchased an Samsung Focus S i937 locked to AT&T. I have purchased an unlock code and have successfully unlocked my phone. Im also unable to use the Internet Sharing feature of my phone. Firstly, I am not a technical guy hence im unable to understand the process stated by you. Secondly, I wanted to find out that does following the process given by you, expose my device to get BRICKED as I am able to understand that involved a JAIL BREAK of the device. Does it have any other side effects.? Like effecting the radio signals or any other such problem.
Thanks
Click to expand...
Click to collapse
ok, first things first.
You won't brick your device, at worst a hardrest all remove all changes you can do, our device, the focus S, isn't fully unlocked, so there are limitations to the amount of damage you can do by arseing it up. With that behind us you have to learn what you are about to do, there isn't a simple way.
So, start by knowing these basics, then read through the guide, any bits you don't understand feel free to ask.
1, AT&T locked your internet connection sharing, so you must re enable that
2, To enable ICS, you must make changes to the registry
3, Microsoft locked you out of making changes to the registry, so you must gain access to do it
4, AT&T left a security hole allowing us to make changes to allow us to change things like registry
5, using that hole we can install software that will give us more access, that software can then allow us to remove the AT&T lock on ics
These things you must do, there is no magic answer, there has been some short cuts made but this in some cases has had a negative effect, such as losing 3g, doing as I said will not have any effect on your signal or anything else
Sent from my Samsung Focus S using XDA Windows Phone 7 App
Have you guys noticed any of the following....
issues after the above procedures were applied (a big thanks to all the brainiacs who know how to hack this stuff):
Slowed Internet Connection
Lower Strength of GPS Signal
Less accuracy and trouble sometime finding location
Less accuracy while using maps because of the above statement
Not complaining, just curious. Thanks to all.:good:
7carisfast said:
issues after the above procedures were applied (a big thanks to all the brainiacs who know how to hack this stuff):
Slowed Internet Connection
Lower Strength of GPS Signal
Less accuracy and trouble sometime finding location
Less accuracy while using maps because of the above statement
Not complaining, just curious. Thanks to all.:good:
Click to expand...
Click to collapse
theres nothing in the code that should have done that, the XML import only fiddles with interop unlock
im not 100% sure what WTT changes but I know the entries it should be fiddling with and shouldnt make any difference, although its been suggested the ICS code does mess with the 3G signal ive not heard anything at all to suggest that it effects GPS as well.
See This Thread for details, ive copied the relevant bits here but all thanks should go to those on the original thread
Option 1
---- 11.3. If your device is not locked to a specific operator, you can use the Samsung Network Profile app (for 1st generation) or Wireless Manager (for 2nd generation)
-------- 11.3.1. Uninstall the Samsung Network Profile / Wireless Manager app.
-------- 11.3.2. Download and install the latest version of the Samsung Network Profile / Wireless Manager app from the Marketplace.
-------- 11.3.3. Open the Samsung Network Profile / Wireless Manager app.
-------- 11.3.4. Select a different Network Operator.
-------- 11.3.5. Now Select your own Network Operator again.
-------- 11.3.6. Exit the Network Profile / Wireless Manager app.
Option 2
Resolve Samsung connection problems
A lot of Samsung owners have complained here about connection problems. They blamed Interop Unlock, but apparently this has more to do with enabling "Internet Connection Sharing" than with "Interop Unlock". You should be able to recover the connection, apply this:
1. Start Diagnosis App> *#32489# ***DOES NOT WORK ON i937***
2. Tap "Back" 2 times to go back to Phone Control
3. Choose: [7] Network Control
4. Choose: [1] GFC
5. Choose: [3] Setting Cancellation
Wait for it to say success, then reboot.
GPS is a completely passive function, I don't have a problem with this, HSDPA may have issues for reasons unknown but using this method doesn't effect mine, perhaps its carrier specific..
dazza9075 said:
theres nothing in the code that should have done that, the XML import only fiddles with interop unlock
im not 100% sure what WTT changes but I know the entries it should be fiddling with and shouldnt make any difference, although its been suggested the ICS code does mess with the 3G signal ive not heard anything at all to suggest that it effects GPS as well.
See This Thread for details, ive copied the relevant bits here but all thanks should go to those on the original thread
Option 1
---- 11.3. If your device is not locked to a specific operator, you can use the Samsung Network Profile app (for 1st generation) or Wireless Manager (for 2nd generation)
-------- 11.3.1. Uninstall the Samsung Network Profile / Wireless Manager app.
-------- 11.3.2. Download and install the latest version of the Samsung Network Profile / Wireless Manager app from the Marketplace.
-------- 11.3.3. Open the Samsung Network Profile / Wireless Manager app.
-------- 11.3.4. Select a different Network Operator.
-------- 11.3.5. Now Select your own Network Operator again.
-------- 11.3.6. Exit the Network Profile / Wireless Manager app.
Option 2
Resolve Samsung connection problems
A lot of Samsung owners have complained here about connection problems. They blamed Interop Unlock, but apparently this has more to do with enabling "Internet Connection Sharing" than with "Interop Unlock". You should be able to recover the connection, apply this:
1. Start Diagnosis App> *#32489#
2. Tap "Back" 2 times to go back to Phone Control
3. Choose: [7] Network Control
4. Choose: [1] GFC
5. Choose: [3] Setting Cancellation
Wait for it to say success, then reboot.
GPS is a completely passive function, I don't have a problem with this, HSDPA may have issues for reasons unknown but using this method doesn't effect mine, perhaps its carrier specific..
Click to expand...
Click to collapse
Thanks for the info. I'll see if it helps. Just as FYI, the code *#32489# does not appear to work on the i937.
7carisfast said:
Thanks for the info. I'll see if it helps. Just as FYI, the code *#32489# does not appear to work on the i937.
Click to expand...
Click to collapse
indeed, so it would seem, many of the diagnostic codes have been disabled which is a pain, even the ones that are left don't always do what you expect them to do
8773 update
dazza9075 said:
firstly DO NOT INSTALL THE SAMSUNG UPDATE!! and if updating the OSan have it unlocked already read This Website and use the relock prevent + edit your hosts file
Absolutely back up your device at every stage using This Guide
So follow these steps
unlock the device Here follow the instructions which includes installing the diagnostic tool and install XAP deployer or XAP handler Here or Here With the XAP file deployer in the WP7 SDK
Then install WP7 Root Tools Here
Then install WP Bazaar market Here
Open Root Tools, and give Bazaar higher level privileges
Find WinTT on the Bazaar market and install it
Open Root Tools, and give WinTT higher level privileges
you may need to restart to get WinTT working
go through WinTT and turn on ICS
Done
Click to expand...
Click to collapse
What if I have already updated to version 7.10.8773.98, is there any other possible way? I don't need any other features. Thanks in advance.
If you have updated the OS and NOT the samsung firmware then reapply the windows break interop unlock, be sure to keep it off the inernet by disabling all coms and then apply the relock prevent xap. if you have applied the Samsung firmware and didn't have it already unlocked or you didn't have a back up, your screwed
Sent from my Samsung Focus S using XDA Windows Phone 7 App
dazza9075 said:
If you have updated the OS and NOT the samsung firmware then reapply the windows break interop unlock, be sure to keep it off the inernet by disabling all coms and then apply the relock prevent xap. if you have applied the Samsung firmware and didn't have it already unlocked or you didn't have a back up, your screwed
Sent from my Samsung Focus S using XDA Windows Phone 7 App
Click to expand...
Click to collapse
First of all I just want to say thanks that you're trying to help me, but I just didn't understand many things u said, I'm not really into technical stuff, but I'll tell you what info I have, in hope of u helping me better.
I don't live in the US and I bought the phone from ebay and it was unlocked and it works perfectly over 2 carriers here in my country, and I have never encountered any problems with it except for the internet sharing feature.
And about 3 months ago the phone notified my to a system upgrade from version 7.10.7740 to version 7.10.8107 then immediatly to version 7.10.8773.98. now I'm guessing these are OS firmwares not samsung software.
but I've noticed something, when I setup my phone for the first time I used a US hotmail account but before I connect to the internet the ICS feature worked, but once I signed in it gave me the dial 611 or go to att.com/mywireless message.
So I am guessing if I restore the device and sign in with a non US hotmail account may result in the feature to be unlocked. The only thing keeping me from trying this because I'll have to redownload all my apps again and reorganize my contacts again. if there's a way to avoid that or someone has tried it please do tell.
Again thanks for your reply.
kholio88 said:
First of all I just want to say thanks that you're trying to help me, but I just didn't understand many things u said, I'm not really into technical stuff, but I'll tell you what info I have, in hope of u helping me better.
I don't live in the US and I bought the phone from ebay and it was unlocked and it works perfectly over 2 carriers here in my country, and I have never encountered any problems with it except for the internet sharing feature.
And about 3 months ago the phone notified my to a system upgrade from version 7.10.7740 to version 7.10.8107 then immediatly to version 7.10.8773.98. now I'm guessing these are OS firmwares not samsung software.
but I've noticed something, when I setup my phone for the first time I used a US hotmail account but before I connect to the internet the ICS feature worked, but once I signed in it gave me the dial 611 or go to att.com/mywireless message.
So I am guessing if I restore the device and sign in with a non US hotmail account may result in the feature to be unlocked. The only thing keeping me from trying this because I'll have to redownload all my apps again and reorganize my contacts again. if there's a way to avoid that or someone has tried it please do tell.
Again thanks for your reply.
Click to expand...
Click to collapse
ok, no problem
can you go to your device settings, in the about section can you tell me your OS version and your firmware version
Samsung Firware Update
dazza9075 said:
ok, no problem
can you go to your device settings, in the about section can you tell me your OS version and your firmware version
Click to expand...
Click to collapse
Dazza,
Kudos for your help as you personally worked with me through this information. Not sure the Samsung update is a concern as I'm running fw2103.11.10.1 and everything works great.
Thanks again.
dazza9075 said:
ok, no problem
can you go to your device settings, in the about section can you tell me your OS version and your firmware version
Click to expand...
Click to collapse
OS version: 7.10.8773.98
Firmware version: 2103.12.05.2
kholio88 said:
OS version: 7.10.8773.98
Firmware version: 2103.12.05.2
Click to expand...
Click to collapse
im afraid to say your firmware is locked,
2103.11.10.1 is unlock-able, im pretty sure anything from xxxx.12.xx.x upwards is locked down solid
I don't suppose you made a backup? if you haven't then there is nothing you can do
the Samsung firmware update was released as a separate update at the same time as the tango 8773 build, it tried to install on mine after the 8773 build
Found a solution =D
dazza9075 said:
im afraid to say your firmware is locked,
2103.11.10.1 is unlock-able, im pretty sure anything from xxxx.12.xx.x upwards is locked down solid
I don't suppose you made a backup? if you haven't then there is nothing you can do
the Samsung firmware update was released as a separate update at the same time as the tango 8773 build, it tried to install on mine after the 8773 build
Click to expand...
Click to collapse
I'm really sorry for the late reply, was busy at work. but during that time I might have found a "Glitch" or a workaround to enable it and I have tested it many times and it works.
Well there are two ways:
1st one which is a sure thing:
1) Turn off the phone, then turn on again.
2) Once the phone is turned on, immediately go to settings>internet sharing and turn it on and BOOM there you go :laugh:
* I have tried this method over a dozen times and it works every single time
** The point here is that you have to enable it immediately after the phone is turned on, I think it happens because the phone doesn't have enough time to send the info. to the servers to know that it's not enabled by default.
2nd one which was succesful over 75% of the time:
1) Go to Settings>cellular>Turn Off, Wait like 5-10 seconds and turn on again.
2) Go to Internet sharing> Turn on, and enjoy :fingers-crossed:
***I don't know why do they work or how, may be it's a Glitch like I said before but the point is they do work
I hope that I've helped someone out there and Thanks to everyone who tried to help me
kholio88 said:
I'm really sorry for the late reply, was busy at work. but during that time I might have found a "Glitch" or a workaround to enable it and I have tested it many times and it works.
Well there are two ways:
1st one which is a sure thing:
1) Turn off the phone, then turn on again.
2) Once the phone is turned on, immediately go to settings>internet sharing and turn it on and BOOM there you go :laugh:
* I have tried this method over a dozen times and it works every single time
** The point here is that you have to enable it immediately after the phone is turned on, I think it happens because the phone doesn't have enough time to send the info. to the servers to know that it's not enabled by default.
2nd one which was succesful over 75% of the time:
1) Go to Settings>cellular>Turn Off, Wait like 5-10 seconds and turn on again.
2) Go to Internet sharing> Turn on, and enjoy :fingers-crossed:
***I don't know why do they work or how, may be it's a Glitch like I said before but the point is they do work
I hope that I've helped someone out there and Thanks to everyone who tried to help me
Click to expand...
Click to collapse
nice find, ICS is disabled locally only, it doesn't have anything to send, the only thing I can think of that makes sense is that the service hasn't been initialised and doesn't call the reg entries that disables ICS, by turning it on manually ASAP it perhaps catches it out. if you enable it, then disable it, can you still enable it again in that session or do you need to restart?
dazza9075 said:
nice find, ICS is disabled locally only, it doesn't have anything to send, the only thing I can think of that makes sense is that the service hasn't been initialised and doesn't call the reg entries that disables ICS, by turning it on manually ASAP it perhaps catches it out. if you enable it, then disable it, can you still enable it again in that session or do you need to restart?
Click to expand...
Click to collapse
Well I tried that, but there is no definite answer to it, sometimes I turn it on and off on and off many times without needing to restart and throughout the whole day, and sometimes it works once and doesn't at the second try. So it all comes down to luck, but still better than nothing
Now the thing is I'm afraid that when the 7.8 update comes, they would fix this glitch =D Haha.
Related
Hello Everyone.
I'm new to the forum and this is my first post, although have been reading and applying a lot of knowledge you guys have! the forum is great!
Anyway, I have an unlocked HTC TyTN II, everything worked fine and I overall very satisfied with the device...
I made a foolish thing! I installed the "Wefi" utility and after playing with it for a little while, I didn't like the thing.. so, I decided to uninstall it.. however, now I find that my kaiser cannot longer connect automatically to my wireless networks after resume.. Now I only get the notification that it has found available wireless networks and, even though I chose not to show the message anymore, it does it every time, and when it does not, the phone doesn't connect to my WiFi.. so I need to do it manually... which is very annoying..
I already restored original registry keys under HLM\Comm\TNETW12511\Parms with no luck so far...
What can I do?... I'm still on the original WM 6.0, have not loaded any ROM changes yet..
Your help would be highly appreciated.
Thanks!
Oscar
Fix for auto connect problem after removing WeFi
My name is Galia Finkelstein and I work at the support desk at WeFi. This doesn't happen anymore on the new version that's been released so for the older version we have a version fix for the problem with the automatic connection, just run this file and you should be good to go http://wefi.com/static/RestoreZCAutoConnect.exe
If I can assist with anything else please drop me a line at [email protected].
WeFi post-uninstall problems
Hi!
I am sufferring from the same problems as "obadillo" - see above.
I downloaded and installed the latest version of WeFi, but after a couple of days of use, I found that I didn't like it, and it also took up too much of my valuable "today" screen space.
After uninstalling, I found that firstly, all my previous wi-fi settings had been lost (WEP keys for my home network, my work network etc etc), and secondly, even after re-enterring these details, my device (HTC Touch UK Version - Orange UK) - (running WM6 Pro) refused to auto-connect when I switch the WiFi on.
After reading the reply from Galia (directly above my post), I downloaded and ran the executable, but found that it made no difference.
Any ideas anyone? I did email Wefi's support email address, but as yet have received no reply.
Thanks in advance!
I have also tried this fix with no success (running WM5). I have also sent an email to wefi support. No response. I would recommend you stay away from this software.
We-Fi Latest Version
I have found a (kind of) solution! I have installed the latest version of We-Fi (downloaded from their website), and then DEselected it in my Today programs. So even though its not in use, its wifi parameters still overrule the PPCs local params. This seems to allow me to switch on and off WiFi WITHOUT using the WeFi software, and it now autoconnects, even with the several wireless networks I have stored, whenever I switch WiFi on, it may take a few seconds to connect, but it now does every time.
Not the greatest "solution", but at least the problem is partially solved.
But as the good man above says, unless you're VERY sure you want to install WeFi, do not install, because you will lose ALL preexisiting WiFi connections and settings etc..
Have a good one!
-=namwollem=-
Hello again, XDA devs!
I also had the problem and I'm struggling with Amir, some guy from the WeFi staff, to get the problem solved or at least recognized.
I left a complete description on my blog with links to people having problems. Here's the article (without links):
Before you consider installing WeFi on your Windows Mobile device, you might want to read this cautiously and save yourself some problems.
If you have not yet tried it, you're not missing much. Although promising, the app takes over your device. It controls your today screen, messes up your wi-fi parameters and some rarer stability issues were also reported.
First, the app needs .Net CF v.2.0, something that takes space and puts more useless crap on your device. Then the app doesn't just find networks and connect to them. Instead it overrides your wi-fi parameters and inserts its own code, thus the uninstallation problems. WeFi also takes a lot of your today screen's estate for basically nothing. How much screen space? Take a look.
Upon uninstalling it, many noticed their devices stopped automatically connecting to wireless networks, among other, rarer problems. The only known fix to the problem is to hard-reset your device and to stay the **** away from this app. We also saw a link to a .exe file somewhere but no one left feedback about it so we assume it's just as good as WeFi. You might also reinstall it, hide it and use it to take care of the wi-fi stuff or go in Settings>Connections>Wi-Fi everytime to select a network to connect to.
The developers were quick to comment about the problem and said they are working on it (see the first comment to this post). However their product page doesn't mention the problem yet and people still get caught. I left them feedback about *some* of the concerned device, assuming it's not all of them, hoping for a change. Feel free to do the same and put some pressure on these guys too.
You might also read one of those threads and see for yourself.
-Nico
Click to expand...
Click to collapse
Full article: http://nicbou.com/2008/07/09/do-not-install…-you-pocket-pcdo-not-install-wefi-on-you-pocket-pc/
I'm trying to get the warning to reach all the download spots, if you guys feel like helping. This is just unacceptable, let's do something about it!
Haim head of WeFi Windows Mobile development team here
Hello all,
First, let me assure you all that we are doing our best to solve any user problem as quickly as possible.
Out of the thousands of mobile users we have, there are really only a few users who complained about this problem.
We released a fix that you can find in: http://www.wefi.com/download/client/RestoreZCAutoConnect.exe
which after executing and doing soft reset should solve the problem.
As our support team explained to “primemaps” via e-mails (sent in 08/07) this fix only works if you uninstall WeFi first.
What you are all describing is that ZeroConfig stopped auto connecting.
By avoiding the manipulation of ZeroConfig default timeouts in our next version (which should be released in about 2 weeks from now), this should not happen anymore.
If this does not help you or you have encountered any other problem – please send me an email to [email protected] and I promise a fast response,
it would help if you mentioned your WeFi version, Device model and ActiveSync version.
I hope you would all choose to install our next version and enjoy the many benefits it can bring you.
Haim
Can't work with it and can't work without it
With my HTC TyTN II I had similar problems as others have described, or maybe even worse: I could no longer work to any wireless networks. It would disconnect in less than one second every time.
I did a hard reset and that didn't work!
I also tried the "fix" the WeFi representative suggested but that didn't help at all either.
What finally helped me was Namwollem's solution: Install WeFi again and removed it from the Today screen (but kept it installed).
I can't help wonder if WeFi changes something in the ROM since a hard reset didn't even fix it.
One of these days I will have to install the ROM all over and see if it makes a difference, but I wish I could avoid that!
I hope others won't be stupid like me and install this #$%[email protected]#&$ software!
Nothing helps for my Diamond to restore Wifi signal
I have Htc diamond with newest Rom downloaded from htc.com.
My problem is that since i installed aplication WEFI(older version) and uninstalled it, i cannot see ANY available wifi networks.. I tried alot of things. I tried soft reset, hard reset, i installed WEFI (newest version) , in moments wifi works and shows available networks and i can connect, but after it doesnt work again.. I would say it shows networks only ocasionally(even if im always surrounded by at least 10 hotspots). I installed newest Rom again, i installed old official ROM, i always put mamximum performance instead of battery, and still i have no results/cannot see ANY available networks). I have a feeling like i really have a hardware problem with wifi now..But again i think whatever it is its caused by this aplication WEFI. Does anylone have any ideas? i saw some Rafael radio ROM , maybe i can try to install that?
Thanks
AArrrggghh!
This god-awful program rears its ugly head again! I have solved the problem totally now by getting a new handset!! Now I have my Touch HD (Blackstone), one thing I WILL NOT do is install this garbage!! A quick search thru the forums here will reveal a small and very useful program which will with one click switch-on WiFi (and auto connect to the signal it finds if stored in your preferred networks) and with another click will switch WiFi off! Its called AKWifiToggle, and while no where near as fancy as WeFi, IT WORKS and DOESN'T MUCK UP YOUR PHONE!!!
Does anyone know if XDA developers have any intent to create an app that would allow us to force the HTC Hero (CDMA for Sprint), and future Sprint Android phones, to roam? Service is weak in my office and I would love to force it to roam.
Thanks!
Would love to have the ability to force roam.
I would love to have the ability to force roam. Sounds like I'm in the same boat. At work i get like 1/2 bar of reception, while my roaming reception is full bars. My centro had the ability to force it to roam which really saved me but my hero doesn't. I would love if an app made this possible with maybe a toggle switch widget. Not sure if you would need root access for this or not. Could someone elighten us as to whether or not this can be done and if someone is already looking into the issue?
totally on the same boat. this is a must have.
it was done easily on my sprint touch on winmo =/
I would love this ability as well.
^^ Bump ^^
Same problem here!
Same here...while I don't know anything about rooting, I would imagine it wouldn't be that difficult for someone with some skill to allow roam only if it was a setting originally there and disabled before release..
Had this for my Pre. Definately would make my Hero much more usable. I actually believe my battery would last over a day if someone could create this.
Ok, we need to bump this thread. I just switched from my Q9c that had full signal while roaming at my
house (otherwise, no service from sprint). I got my Hero yesterday, and I can't get service PERIOD. I
am willing to pay, and so are a lot of others, for an app for the Hero to force roam. Willing to pay damn good money here.
PLEASE, someone chime in on this.
Yes I need this app I would so pay for this I only need it at my home and I'm paying for air rave bump bump bump
Someone seems to be trying http://www.mail-archive.com/[email protected]/msg16197.html
I have noticed something.......if I turn on wifi in my home rather than use the data it finds roaming network 50% less. If I leave an app running that consistently taps the data which can be expensive unless you have unlimited it seems to hold the roaming signal in place until the data connection goes dormant.
bump?Anything?
Bumpity bump. This is the only thing stopping me from getting a Hero (or another Android phone).
I am honestly shocked noone has come up with this yet. This is definately one instance where Android fails. Im bout ready to jump ship to big red.
pahick said:
I am honestly shocked noone has come up with this yet. This is definately one instance where Android fails. Im bout ready to jump ship to big red.
Click to expand...
Click to collapse
I'm surprised as well. I think I'm going to get the Pre for now, and if there is ever a fix for this, then I'll move over to an Android phone. I'd like to contribute to a solution, but unfortunately time is hard to come by (the same I'm sure for many people).
I upgraded to Android and love it but hate the no forced roaming crap so I had to trade my other phones for a TP2 but I can't activate it until I get my stupid $100 MIR back from Sprint. So I suffer....
V.A.T.Juice said:
Someone seems to be trying http://www.mail-archive.com/[email protected]/msg16197.html
I have noticed something.......if I turn on wifi in my home rather than use the data it finds roaming network 50% less. If I leave an app running that consistently taps the data which can be expensive unless you have unlimited it seems to hold the roaming signal in place until the data connection goes dormant.
Click to expand...
Click to collapse
So the link you provided above...is guy that barking up the wrong tree?
Alright folks..I think i may have stumbled upon a workaround to force roaming!!
Procedure:
1. Download and install the diagnostics drivers for the Hero
2. Download the latest version of QPST (i'm using 2.7 build 323)
3. On your phone make sure USB debugging is turned on and push ##3424# in your phone keypad
4. Plug your phone in via USB and install the diagnostics drivers when prompted
5. If you've installed the drivers correctly, you should be able to go to Device Manager in control panel and see it registered as a COM port/USB diagnostic device
6. Next open QPST Service Programming>Connection>New. You should see your phone/COM port and you obviously choose that.
7. Choose "Read from phone" in the lower left hand of the window, after which you'll be prompted for your service programming code/MSL (Google your way to find it if you don't already have it)
8. Whence you have entered that code you'll see your phone info around
9. Go to the System tab (5th tab in my setup)
10. NOW..what worked for me was this setup: Preferred Mode: Digital Only (upon further investigation, apparently "Automatic" works as well) Band Preference: A Only (as a side note B Only worked for me as well) Roam Preference: Automatic
11. Press Write to Phone
12. Reboot your phone
That should do it!! If alls done right you should see the familiar Roam triangle over your service bars! Hope it works fer ya..to change back from roaming only change everything back to Automatic.
*DISCLAIMER*: I've been messing around with my phone's service programming quite a bit so this may only work for me cuz of some erroneous change I made to the internals. Also I've only tried this in an area that I know I can get signal at, so whether it is TRULY roaming, I don't know. All I do know is that it says Roaming in my phone's Status
KERKEDAGAIN said:
Alright folks..I think i may have stumbled upon a workaround to force roaming!!
Procedure:
1. Download and install the diagnostics drivers for the Hero
2. Download the latest version of QPST (i'm using 2.7 build 323)
3. On your phone make sure USB debugging is turned on and push ##3424# in your phone keypad
4. Plug your phone in via USB and install the diagnostics drivers when prompted
5. If you've installed the drivers correctly, you should be able to go to Device Manager in control panel and see it registered as a COM port/USB diagnostic device
6. Next open QPST Service Programming>Connection>New. You should see your phone/COM port and you obviously choose that.
7. Choose "Read from phone" in the lower left hand of the window, after which you'll be prompted for your service programming code/MSL (Google your way to find it if you don't already have it)
8. Whence you have entered that code you'll see your phone info around
9. Go to the System tab (5th tab in my setup)
10. NOW..what worked for me was this setup: Preferred Mode: Digital Only (upon further investigation, apparently "Automatic" works as well) Band Preference: A Only (as a side note B Only worked for me as well) Roam Preference: Automatic
11. Press Write to Phone
12. Reboot your phone
That should do it!! If alls done right you should see the familiar Roam triangle over your service bars! Hope it works fer ya..to change back from roaming only change everything back to Automatic.
*DISCLAIMER*: I've been messing around with my phone's service programming quite a bit so this may only work for me cuz of some erroneous change I made to the internals. Also I've only tried this in an area that I know I can get signal at, so whether it is TRULY roaming, I don't know. All I do know is that it says Roaming in my phone's Status
Click to expand...
Click to collapse
Has anyone tried this yet? I don't have my cable available now to do so myself, but hopefully I can get it this weekend.
links
links please.....
At various points my Focus S seems to lose the ability to use it's data connection- either Wifi or 3G. I can't work out why- has anyone else experienced this? Web pages don't load, etc.
I installed a patch that allowed me to use Internet Sharing, I'm concerned this might have been the cause of it...
I've found that if I do not reboot my phone at least once a day I get random problems like that.
untogether said:
At various points my Focus S seems to lose the ability to use it's data connection- either Wifi or 3G. I can't work out why- has anyone else experienced this? Web pages don't load, etc.
I installed a patch that allowed me to use Internet Sharing, I'm concerned this might have been the cause of it...
Click to expand...
Click to collapse
I don't reboot my phone all that often. I've never seen it lose ALL data connection capability tho...
A regular power cycle doesn't hurt tho...
Can this be the issue?
I'm experiencing the same thing, but mainly when I'm connected to 3G. My phone shows it has full bars and 3G or 4G availability but I find 60% of the time my phone has little to no data going to my phone, so none of my apps or news feeds get updated or they get updated slowly. When I'm on wifi the phone works flawlessly.
I read this article,
http://pocketnow.com/windows-phone/hack-fixes-mms-on-unlocked-samsung-wp7-handsets
One of the odder quirks of Windows Phone 7 to appear since the platform's launch has been the absence of Automatic Data Configuration for users who swap SIM chips and network-hop with their unlocked handsets.
ADC should let the phone communicate with the network it's connected to in order to retrieve all the settings it needs in order to use the network's services. Samsung defended disabling ADC by saying that its phones are intended to only be used with a specific carrier
Now I know this is talking about MMS, but does anyone think it's related to 3G connectivity from a different service provider?
i am having the same problem, it started 2 days ago after i unlocked my phone, at&t gave me the unlock code, i had to enable hot spot & de brand by loading a file, i don't have problem with WiFi just 4G, it will be fixed if i re start the phone.
problem for me with wifi+3G
Not sure if this is the same as the OP. I run with both WiFi and 3G enabled most of the time. Basically everything will be working fine for a while, then I'll try to open a web page from Twitter and it will time out. Sometimes retrying will work, but it will take an abnormally long time to load the page. Other times it never works, and when I go to another app (e.g. mail) and try to sync, and that will also time out. When that happens I usually turn off either WiFi or 3G, then toggle the state of the one I left on (e.g. turn 3G off, then back on), and it clears up. I've never needed to reboot the phone. I don't have ICS enabled, but my phone is fully unlocked.
I've guessed this problem was caused by a lost or bad connection on one of the wireless protocols (like WiFi), where the phone thinks it is connected to WiFi and won't switch over to the other protocol (3G).
One more thing: I'm running 8107 and I don't remember this issue occurring before the upgrade.
M
mlekas said:
Not sure if this is the same as the OP. I run with both WiFi and 3G enabled most of the time. Basically everything will be working fine for a while, then I'll try to open a web page from Twitter and it will time out. Sometimes retrying will work, but it will take an abnormally long time to load the page. Other times it never works, and when I go to another app (e.g. mail) and try to sync, and that will also time out. When that happens I usually turn off either WiFi or 3G, then toggle the state of the one I left on (e.g. turn 3G off, then back on), and it clears up. I've never needed to reboot the phone. I don't have ICS enabled, but my phone is fully unlocked.
I've guessed this problem was caused by a lost or bad connection on one of the wireless protocols (like WiFi), where the phone thinks it is connected to WiFi and won't switch over to the other protocol (3G).
One more thing: I'm running 8107 and I don't remember this issue occurring before the upgrade.
M
Click to expand...
Click to collapse
I have the EXACT same issue as you state here. The problem has existed since day one with this phone. I updated through to 8107 and the issues still exist.
So now for some interesting/good news... my dad works for a large company that has direct access to AT&T Wireless Engineers, so he got in contact with an an engineer and explained this issue as both him and I experience the same issues. The engineer was able to get a hold of a Samsung Focus S and experienced the same problems for himself. He then escalated the issue directly to Samsung who in-turn escalated this to Microsoft. Apparently Microsoft claimed the issue was theirs and they are now working on an update to rectify the problem. Samsung also apparently has some updates that they were going to push but have since held off on pushing them until Microsoft has the fix for this data issue fixed.
I've been so frustrated by these issues and the lack of information regarding them that I thought you might be interested in knowing that Samsung, Microsoft, and AT&T ARE working to get the problem resolved.
Wow! This is really great news as I am having the exact same problem. I usually just on and back off Airplane mode and that fixes it, but its a real hassle. So, the word is that Samsung is, possibly, combining all the current issues like this data, the extra settings/quirky display, and the 8107/disappearing keyboard all in to one?
matt
The AT&T engineer didn't say what was going to be included in the Samsung update, just that Samsung was holding off on releasing the update until after Microsoft supplied a fix for the data issues. Hopefully Samsung's update fixes all of the Focus S quirks (data issues, delayed keyboard sounds, quirky display/auto brightness) in one shot.
Thanks for posting this, i feel better that Microsoft & Samsung are working on fixing this issue.
Any updates/news about this specific issue? I have the exact issue with my Focus S since I got my phone
I too have been having this issue and still haven't found a solution. I hope Samsung and Microsoft come up with a solution soon because it is very irritating.
Keep this post updated
trupajay said:
I too have been having this issue and still haven't found a solution. I hope Samsung and Microsoft come up with a solution soon because it is very irritating.
Keep this post updated
Click to expand...
Click to collapse
Am I mistaken...but the majority of people posting in this thread, have the problem after installing something non standard?
8107 is not released by Samsung/AT&T, so the possibility that an associated file is not included, does exist.
Was the hotspot patch and official release, or was it intended for sideload or something?
I'm just curious. I had the luxary to have my Dell Venue Pro sent to Microsoft and examined by the Test and OEM team for WP. This was several months ago. They were able to determine I had used the force update trick to update my Device. From pieces of various emails, I was able determine the update included multiple files. The multiple files consisted of Device specific instructions and additional files needed for the that operator, in addition to the Update provided by MS.
If this is the case, forcing an update into place may indeed load the update, but it might not include other needed files.
Now, I'm not an expert, a dev or anything else important. I cannot validate that what I said is true. But, i do have the benefit of having my older device looked at by MS several months ago. This does not prove 2+2=4. But it does raise enough doubt in my mind that I won't be foruce updating my devices until alot more people get a look at this methodology and perhaps come up with some answers, or at least explanations.
Does the internet connection issue appear only after the forced 8107 update?
I had been using a Chevron-unlocked Samsung Focus S on the 7720 and had experienced no issues. Just updated to 8107 following Heathcliff74's method so I hope this issue doesn't start to plague me.
Also, has anyone had success with voluptuary's wifi internet connection sharing and interop-unlock method? I am hesitant to apply that hack exactly because of worries about issues with internet...
I'm a big chicken. I am just going to wait for AT&T to release the update. I just have this funny feeling that there's a little something extra included with the at&t update. I've done plenty of customizing over the years, but just have a feeling about this. I do wish they would step on it, though.
matt
Sent from my SGH-i937 using XDA Windows Phone 7 App
Extra as in something to block out interop unlocks (bad) or firmware updates (good)? Definitely hoping for a camera firmware upgrade.....
armodons said:
Extra as in something to block out interop unlocks (bad) or firmware updates (good)? Definitely hoping for to get a camera firmware upgrade.....
Click to expand...
Click to collapse
when I said extra, I meant a focus s specific file that might act as a customization or configuration file. I don't think a block file of any sort might be included. But I do know that at&t is proprietary enough to want a unique identifier of some sort. In Gen 1, at&t had special builds just for them, turning on or off features. I know the hd7 had a specific 'config' type file, as did the venue pro. Would I call these extra files? No. I would call them required files. Build 8107 was a single build for WP. Do you think that all phones with mango had the same needs, samex files, same configs? Or is it possible that a related file acted as a config or control.
I'm not smart enough to know for sure. My gut says...maybe. .
Same Problem
Any news on this? I am having the same issue on my Focus S
gravitynoise said:
Any news on this? I am having the same issue on my Focus S
Click to expand...
Click to collapse
We just need AT&T to release the update. That's all. Rumor is all comes with the Tango update.
matt
Sent from my SGH-i937 using XDA Windows Phone 7 App
I hope so. Thanks for the fast response
So yeah, assuming their efforts is successful and they manage to set up their wifi to deny access to rooted devices, is there anyway around this without unrooting?
Apoplectic1 said:
So yeah, assuming their efforts is successful and they manage to set up their wifi to deny access to rooted devices, is there anyway around this without unrooting?
Click to expand...
Click to collapse
There used to be a module called Root Cloack(er) for Xposed frameworks that hides root, don`t know if there is a version for Marsmellow though. Its here on the XDA forums somewhere.
But how? I can't think of any way to detect a rooted/jailbroken phone from a Wifi connection, without you having to install or run some other piece of software/script that would give them that information.
revrenhex said:
But how? I can't think of any way to detect a rooted/jailbroken phone from a Wifi connection, without you having to install or run some other piece of software/script that would give them that information.
Click to expand...
Click to collapse
I'm not sure. I would not put it past my company to make us install such a script in order to access wifi.
Many places are doing this. Detecting root is simple. Even Snapchat and others are doing it. Heck they are even looking for xposed and won't work if detected.
You would be amazed at what info people can get from your device when it's connected to wifi
zelendel said:
Many places are doing this. Detecting root is simple. Even Snapchat and others are doing it. Heck they are even looking for xposed and won't work if detected.
You would be amazed at what info people can get from your device when it's connected to wifi
Click to expand...
Click to collapse
a lot of info sure... But an app running on your phone detecting it, vs detecting that something is installed simply by connecting to their network? Your phone passes along a lot of info... but not installed binaries?
I could see them maybe having a black list, like if you're connecting the the exposed repositories your likely rooted... but if you are not using programs that require root access and communicate over the network, how are they doing this?
scryan said:
a lot of info sure... But an app running on your phone detecting it, vs detecting that something is installed simply by connecting to their network? Your phone passes along a lot of info... but not installed binaries?
I could see them maybe having a black list, like if you're connecting the the exposed repositories your likely rooted... but if you are not using programs that require root access and communicate over the network, how are they doing this?
Click to expand...
Click to collapse
A simple request for the info. Have you ever looked at a logcat and saw everything running. I could be gone for weeks and come home and tell you every device that has ever connected to my network the whole time I was gone and with the right things in place could even tell if they are rooted or jailbroken
I can see the same as the poster above me on our network, it is not hard at all. And if we had such a policy and you used a cloaker I would have you fired.
Their network, their rules. I really don't think you should do this.
zelendel said:
A simple request for the info. Have you ever looked at a logcat and saw everything running. I could be gone for weeks and come home and tell you every device that has ever connected to my network the whole time I was gone and with the right things in place could even tell if they are rooted or jailbroken
Click to expand...
Click to collapse
Can you provide any links or further detail? Obviously by viewing system logs you can tell whats running.... but I have never seen any standard network function to request a connected device to send logs without permission? Google searching the topic provides little info as its saturated with info on how to root, and using root for ad blocking.
Even a brief overview of the setup you would use to check? What are "the right things" and what "place" would the need to be in?
scryan said:
Can you provide any links or further detail? Obviously by viewing system logs you can tell whats running.... but I have never seen any standard network function to request a connected device to send logs without permission? Google searching the topic provides little info as its saturated with info on how to root, and using root for ad blocking.
Even a brief overview of the setup you would use to check? What are "the right things" and what "place" would the need to be in?
Click to expand...
Click to collapse
I wont get into it too deeply as I have my guys that watch this site as well and If they go around my security setup like with exchange pin request or using some devices on my network I will fire them on the spot. Lets just say the router logs everything that is done on the network. Connect your device to your wifi and then watch a logcat. You should be able to see what you are looking for.
Understand that unless approved by me no device can connect to my network. With the right router you can see everything about a device. you wont find much info on google as things like this are kept close to the chest with the IT crowd
zelendel said:
I wont get into it too deeply as I have my guys that watch this site as well and If they go around my security setup like with exchange pin request or using some devices on my network I will fire them on the spot. Lets just say the router logs everything that is done on the network. Connect your device to your wifi and then watch a logcat. You should be able to see what you are looking for.
Understand that unless approved by me no device can connect to my network. With the right router you can see everything about a device. you wont find much info on google as things like this are kept close to the chest with the IT crowd
Click to expand...
Click to collapse
No one here is trying to connect to your network. It's XDA and people are curious. I agree that it's silly to circumvent measures used by the company you work for (assuming you want to keep working there), but I also find it strange that you connect to a network and have that router, etc tell if your phone has a specific binary and apk. Is that what you are claiming happens?
gee2012 said:
There used to be a module called Root Cloack(er) for Xposed frameworks that hides root, don`t know if there is a version for Marsmellow though. Its here on the XDA forums somewhere.
Click to expand...
Click to collapse
This is not possible to limit an android version via network traffic, the best they could do is catch you updating cyanogenmod and ban your mac by guessing that your rooted, but its so much work, its a bunch of empty threats.
mwalt2 said:
No one here is trying to connect to your network. It's XDA and people are curious. I agree that it's silly to circumvent measures used by the company you work for (assuming you want to keep working there), but I also find it strange that you connect to a network and have that router, etc tell if your phone has a specific binary and apk. Is that what you are claiming happens?
Click to expand...
Click to collapse
It can yes. And you are right this is XDA but you would be amazed at what info is not shared here or anywhere except between IT managers or other devs.
Once connected to a network it is not that hard to get everything from a device. This is why all the warnings about connecting to open networks. While Open networks are more of a risk it goes to show that anything can be done.
This has been a practice for a very long time even back to the WM days when roms encluded time bombs that would make the rom not work after a set time and date.
zelendel said:
It can yes. And you are right this is XDA but you would be amazed at what info is not shared here or anywhere except between IT managers or other devs.
Once connected to a network it is not that hard to get everything from a device. This is why all the warnings about connecting to open networks. While Open networks are more of a risk it goes to show that anything can be done.
This has been a practice for a very long time even back to the WM days when roms encluded time bombs that would make the rom not work after a set time and date.
Click to expand...
Click to collapse
It's all smoke and mirrors to me until someone explains how it's possible to read files on a device by a user just connecting to a network and providing no further interaction. Sure you can get the device MAC, name, etc, but that's not how I read your statements. As mentioned in the post above yours, you can guess on network traffic, etc, but I really doubt anyone can "know everything".
Loved the HTC Diamond and TP2 [emoji1]
mwalt2 said:
It's all smoke and mirrors to me until someone explains how it's possible to read files on a device by a user just connecting to a network and providing no further interaction. Sure you can get the device MAC, name, etc, but that's not how I read your statements. As mentioned in the post above yours, you can guess on network traffic, etc, but I really doubt anyone can "know everything".
Loved the HTC Diamond and TP2 [emoji1]
Click to expand...
Click to collapse
Its not guessing network traffic. You can tell exactly what sites they go to. You can tell if they are using a mobile or desktop browser. (same way the carriers do it to prevent teethering)
All it takes is being connected to a network to be infected with a virus. Just how do you think that happens?
No one is gonna explain it. Just like we dont allow talks about network penetration. There are just something that are best not out in public view.
Here is an older example of how they detected jailbroken iphones on school networks.
zelendel said:
Its not guessing network traffic. You can tell exactly what sites they go to. You can tell if they are using a mobile or desktop browser. (same way the carriers do it to prevent teethering)
All it takes is being connected to a network to be infected with a virus. Just how do you think that happens?
No one is gonna explain it. Just like we dont allow talks about network penetration. There are just something that are best not out in public view.
Click to expand...
Click to collapse
I am specifically referring to detecting that a binary and an apk exist on a device SOLELY based on establishing a network connection (not viruses, not websites visited...user does nothing and no new code/software runs on the device). That does not seem probable to me.
It may just be semantics, but that's how I interpreted your original statement.
Of course network admins can see what sites users visit, what browser they use, etc and there is no guessing - only logs [emoji3]. I was using guessing in different sense (ie, you see something "suspicious" and draw conclusions).
Wow.... if i ever get fired after i found out they are 'reading' files on my device... this will be case for a courtn no doubt! I'm sure (at least where i live) the one that fires you based on such actions will have a big problem!
mwalt2 said:
I am specifically referring to detecting that a binary and an apk exist on a device SOLELY based on establishing a network connection (not viruses, not websites visited...user does nothing and no new code/software runs on the device). That does not seem probable to me.
It may just be semantics, but that's how I interpreted your original statement.
Of course network admins can see what sites users visit, what browser they use, etc and there is no guessing - only logs [emoji3]. I was using guessing in different sense (ie, you see something "suspicious" and draw conclusions).
Click to expand...
Click to collapse
If you read the link they showed how to detect cydia which showed them it was jailbroken. The same thing can be done on android.
Droidphilev said:
Wow.... if i ever get fired after i found out they are 'reading' files on my device... this will be case for a courtn no doubt! I'm sure (at least where i live) the one that fires you based on such actions will have a big problem!
Click to expand...
Click to collapse
You would lose. When you agree to use their network you agree to all their rules. This is the main reason for things like Knox. As more and more place move to a "right to work" setup where they dont need a reason to fire you at all. I would be careful about what rules one does break. Gone are the days where we could get away with things like this.
You know this got me thinking. Maybe I will play around with my network and see what I can find out. I have to block root and xposed users anyway so this would be a great challenge. Might be awhile as I revert all my PC back to windows 7.
From an IT perspective, a rooted device provides little to no security. That's why most mobile device management (MDM) products include a feature that let IT block rooted devices from connecting to the secure network or accessing corporate assets. But these products must be able to detect rooted devices before they can block them, and there are ways users can get around those detection mechanisms. Organizations that rely on MDM alone to detect rooted devices should be aware of these limitations.
http://searchmobilecomputing.techta...evice-risks-include-network-access-data-theft
zelendel said:
If you read the link they showed how to detect cydia which showed them it was jailbroken. The same thing can be done on Android.
Click to expand...
Click to collapse
I didn't see a link in Tapatalk or Chrome mobile. As for me, I see no reason why I'd ever want to connect my personal smartphone to my work network. Thanks for the discussion.
zelendel said:
...snip...
Click to expand...
Click to collapse
You made me VERY curious! I will try to call HR department of the company i work for today to ask how this works for us
If i get fired because of this phonecall i will try to get you fired for making me curious
Hi, I desperately need some support as my device refuses to sign in in both Youtube and Play Store. I'm therefore unable to use both these apps. An error message keeps saying I'm offline and proposes to retry, but it simply never works whatever I do.
Issue has been going on since many weeks; I googles and tried many suggestions without any success.
Before I do a hard reset, has anyone an idea what this can be?
The amazing part is that my daughter's tab (Galaxy S2) is also having the same issue since some time! She has her own google account. What the heck is going on?
Thanks!
Prerna said:
Hi, I desperately need some support as my device refuses to sign in in both Youtube and Play Store. I'm therefore unable to use both these apps. An error message keeps saying I'm offline and proposes to retry, but it simply never works whatever I do.
Issue has been going on since many weeks; I googles and tried many suggestions without any success.
Before I do a hard reset, has anyone an idea what this can be?
The amazing part is that my daughter's tab (Galaxy S2) is also having the same issue since some time! She has her own google account. What the heck is going on?
Thanks!
Click to expand...
Click to collapse
This may be an bug in the updated version of google play store or YouTube..Have you tried to sign in specific apps usning another google account you have..Also try to clear cached data of phone as well as clear data of those apps* you can also uninstall updates of those apps and force stop or disable them and after enabling again try to access*..Also might be network related issue sometimes weaken network shows such type of errors..Try to acees with high speed wifi or data with maximum signal..Even if problem exist then simply reset is last option for you..
DroidHackeR said:
This may be an bug in the updated version of google play store or YouTube..Have you tried to sign in specific apps using another google account you have..Also try to clear cached data of phone as well as clear data of those apps* you can also uninstall updates of those apps and force stop or disable them and after enabling again try to access*..Also might be network related issue sometimes weaken network shows such type of errors..Try to acces with high speed wifi or data with maximum signal..Even if problem exist then simply reset is last option for you..
Click to expand...
Click to collapse
Hi, I tried most of the solutions you're are mentioning, without any success. What I find interesting is what you wrote about weak network. I cancelled my cable connection at home some time back and using instead a 4G modem. Could that really be the culprit, knowing the coverage is medium? It sounds to me strange that such possibility exists, also I often go out and have full 4G network for hours sometimes and still it doesn't work. Interestingly enough, every about once per month it suddenly works, and I'm able to update my apps and also access my account in Youtube. It'll work for 2-3 days, until it's again the same bad. Really boring and would love to understand this issue better so as to possibly fix it. Thank you.
Prerna said:
Hi, I tried most of the solutions you're are mentioning, without any success. What I find interesting is what you wrote about weak network. I cancelled my cable connection at home some time back and using instead a 4G modem. Could that really be the culprit, knowing the coverage is medium? It sounds to me strange that such possibility exists, also I often go out and have full 4G network for hours sometimes and still it doesn't work. Interestingly enough, every about once per month it suddenly works, and I'm able to update my apps and also access my account in Youtube. It'll work for 2-3 days, until it's again the same bad. Really boring and would love to understand this issue better so as to possibly fix it. Thank you.
Click to expand...
Click to collapse
1)It's possible sometimes your networks proxy enforce your google id not to be sign in into specific apps you have mentioned and yes sometimes low network coverage also causes the issues like offline or sign in errors like please check network connection due wireless functionality limitations
2)I am curious about one thing if you have tried almost all the solutions found on google as well as your own, is it that much impossible for you to make backup of your current imp data and give a try to hard reset?? If i am not wrong, please give it a try because sometimes software glitches also causes the app crashes or network errors
3) Next thing sometimes your stock software gets corrupted due to some fatal malwares so many system apps as well as third party apps pretended to show errors like unfortunately process is stopped also some network related issue, so one solution you can try is to re-apply or update your current stock firmware..i.e. if update is unavailable you can fresh install same firmware version again on your phone which most of the times resolves the issue
4) As i mentioned in my first post you should give a try to any high speed mobile network like LTE or 5ghz band Wi-Fi which gives constant access to internet connection which probably help you to figure out exact issue i.e. with modems or connection your using or with your device itseld due to corrupted software
5)Please mention your device model no,country,your mobile network provider information so that it would be easy to figure out your issue
Thank you. Yes, a hard reset could solve it although I'd like to avoid it if possible. I will try ASAP on a solid wifi and see. I forgot to mention an important point: my daughter's tablet (Galaxy S2 pro) has got the same issue, and it started near about the same time like it did to me. She has her own Google ID, and she uses a different set of apps. Will report whenever I can test on a wifi.
My mobile provider is Salt Mobile here in Switzerland, and my Note 5 is a generic one bought in UAE. I run Dr. Ketan rom of about 8 months ago.
Prerna said:
Thank you. Yes, a hard reset could solve it although I'd like to avoid it if possible. I will try ASAP on a solid wifi and see. I forgot to mention an important point: my daughter's tablet (Galaxy S2 pro) has got the same issue, and it started near about the same time like it did to me. She has her own Google ID, and she uses a different set of apps. Will report whenever I can test on a wifi.
My mobile provider is Salt Mobile here in Switzerland, and my Note 5 is a generic one bought in UAE. I run Dr. Ketan rom of about 8 months ago.
Click to expand...
Click to collapse
1)Ohhhk now i got, i assume you might be using Indian Variant with indian mobile network providers as per your username 'prerna'
so your device might be factory unlocked SM-N920C
2)So you should try on any faster network provider or incase wifi to check if problem is due to weak singal strength or specific with your device software integration
3) And i think you should give a try to dr.ketan's nougat rom which is based on latest nougat firmware which will might help you to overcome your issue as new base,new kernel will help you to get stable connectivity
4)If your running dr.ketans MM 6.0.1 based rom then download latest N5 nougat rom to flash
5)I know u might not new in flashing custom roms ad your running a custom one only from 8 months but once again be sure to enable 'oem unlocking' and 'usb debugging' options from developers option before flashing latest twrp version(Don't worry u can flash dr.ketans rom using any 3.0 twrp version ur running now but if latest version with stability and improvements available for your device then you can install it as per your requirement) if your running old one or before flashing nougat based N5 rom by dr.ketan