Installing fastbook - Dell Streak 7

I'm trying to install the latest ROM - I have followed the instructions, but when I try and run setup to install the drivers, Windows tells me that it has found fastbook, I get the windows driver install prompt - I select next, it obviously looks for the driver - and then I get the message - Cannot Install this Hardware. This therefore means that the drivers do not install and I get the message "Please Plug-in your Device!!" I hit OK - it tells me the same again and again - and the rollsback the driver install. Any ideas on how I can overcome? Thanks.

leighv said:
I'm trying to install the latest ROM - I have followed the instructions, but when I try and run setup to install the drivers, Windows tells me that it has found fastbook, I get the windows driver install prompt - I select next, it obviously looks for the driver - and then I get the message - Cannot Install this Hardware. This therefore means that the drivers do not install and I get the message "Please Plug-in your Device!!" I hit OK - it tells me the same again and again - and the rollsback the driver install. Any ideas on how I can overcome? Thanks.
Click to expand...
Click to collapse
I really hope your on a mobile device that is auto correcting "fastboot" as "fast book":thumbdown:
You have to manually point windows to the folder you have the drivers unpacked onto your computer
Search the forums...... even read the stickies section. This has been described in full detail several times.
This took me a minute to search, copy, paste:
http://forum.xda-developers.com/showthread.php?t=1395964
There is a link there to install drivers, do some reading, the streak is not as common a development as other more popular devices.
The drivers should be located in the nvflash package you say you are trying to install. Again, point windows to the folder the drivers are in.
I will not provide step by step instructions as I myself and many before me have already done so. Give yourself a half hour of reading through the posts and you will more then likely find exactly what you are looking for.
Sent from my Galaxy Nexus using xda premium

ElfinJNoty said:
Give yourself a half hour of reading through the posts and you will more then likely find exactly what you are looking for.
Click to expand...
Click to collapse
you're being way too lenient with the n00bs, half an hour of reading through forums? seriously, this is the same guy who apparently put a 128gb sdcard in a streak 7 and made it apparently work, I deem this thread closed as the amount of others that contain information to the questions asked

Question answered above. Please search thoroughly in future before creating threads.
Thread closed.

Related

Stuck on rooting

I was following this guide:
http://wiki.cyanogenmod.com/index.p...eam_Firmware_to_CyanogenMod#Rooting_the_phone
Everything worked out okay until I got to the section about rooting. Because I live in Hawaii, I have no 3G network and must sign in to my Google account through WiFi. That's when I got linked to this guide:
http://modmygphone.com/forums/showpost.php?p=51891&postcount=12|
...and everything went downwards from there. I could not understand what this guide was talking about. There were downloads sending me to links. There were links sending me to downloads. I wound up visiting dozens of external links and downloading dozens of .zip files with no clue whatsoever as to where to put them. I still have no idea what this guid is talking about.
Can anybody help me get past the Google sign in screen so I can continue with the CyanogenMod guide?
You don't need 3G to sign in, Edge or even GPRS is just fine. Do you really need to activate by Wi-Fi?
Did you set-up ADB? This is crucial, you 100% need it.
The guide you linked to is one the most comprehensive that've seen up-to date. To use that guide, you do NOT need to download anything, everything is done by typing in few commands on your phone and then on your computer.
To me, it sounds like you have problems setting up your ADB and there are good guides for that as well, even the one in the linked thread is pretty good.
Basically, to set up your ADB you need to
Download ADB first.
Install Drivers
Point your computer to ADB (Path variable)
Connect your phone and hack away.
Follow only one guide.. do not wander off and download all kinds of zip files.
I think I got to that step somewhere in that second guide I linked to. I clicked on "Windows USB driver" assuming it was just one file, but instead it sent me to this page:
http://developer.android.com/sdk/win-usb.html
I decided to read that page and download the SDK file here:
http://developer.android.com/sdk/index.html
I think this is exactly where I left off because this was where I started getting confused. I did not know how to install the program or where to install it in (Windows 7 64-bit). I'm also having a hard time getting my computer to recognize my SD card/phone (it charges, but it won't recognize it as an external drive anymore).

[HELP]cmd adb error msg...

I already have my pc setup with adb. It appears to be working just fine. I'm trying to setup adb on my laptop and is running into all types of problems. I've downloaded the sdk and ran the sdk setup.exe and downloaded all the latest files, and of course the usb driver. I was able to successfully install the driver and was able to connect my G1 for file transfer. I've followed the guide info to the letter but for some strange reason I get the following:
Code:
* daemon not running. starting it now *
* daemon started successfully *
error: device not found
I've already tried uninstalling the newest driver and installing the working one from my pc, then I tried downloading a driver that was listed by a user in this thread. Still no luck. Any advice would be greatly appreciated!
SG_Shadow said:
I already have my pc setup with adb. It appears to be working just fine. I'm trying to setup adb on my laptop and is running into all types of problems. I've downloaded the sdk and ran the sdk setup.exe and downloaded all the latest files, and of course the usb driver. I was able to successfully install the driver and was able to connect my G1 for file transfer. I've followed the guide info to the letter but for some strange reason I get the following:
Code:
* daemon not running. starting it now *
* daemon started successfully *
error: device not found
I've already tried uninstalling the newest driver and installing the working one from my pc, then I tried downloading a driver that was listed by a user in this thread. Still no luck. Any advice would be greatly appreciated!
Click to expand...
Click to collapse
plug your phone in
get working drivers
install linux, it works better
I already have my pc setup with adb. It appears to be working just fine. I'm trying to setup adb on my laptop and is running into all types of problem
Click to expand...
Click to collapse
[*]plug your phone in
[*]get working drivers
[*]install linux, it works better
Click to expand...
Click to collapse
u forgot a step.
[*]post in the correct forum
Firerat said:
plug your phone in
get working drivers
install linux, it works better
Click to expand...
Click to collapse
1) Done [Don't insult me!]
2) Tried 3 different drivers. All allowed me to connect my G1 to transfer files, but not ADB.
3) ...shouldn't have to install linux. My pc (running windows abviously) works just fine. My laptop, running windows, should work the same.
Thanks for the assistance though...
Daneshm90 said:
u forgot a step.
[*]post in the correct forum
Click to expand...
Click to collapse
Fail!
SG_Shadow said:
1) Done [Don't insult me!]
2) Tried 3 different drivers. All allowed me to connect my G1 to transfer files, but not ADB.
3) ...shouldn't have to install linux. My pc (running windows abviously) works just fine. My laptop, running windows, should work the same.
Thanks for the assistance though...
Fail!
Click to expand...
Click to collapse
read the adb for dummies thread, post in that thread...........................
and
your welcome.
would you like me to wipe your nose as well?
This IS in the wrong forum.
Moved.
Firerat said:
read the adb for dummies thread, post in that thread...........................
and
your welcome.
would you like me to wipe your nose as well?
Click to expand...
Click to collapse
I really wouldn't except this behavior from you, but I see we all fall from grace every now and again. I've posted in that thread already, no one can seem to come up with an intelligent response. I followed all the instructions in both adb help threads for proper installation on my laptop. If you don't know the answer to what I'm seeking, I would honestly prefer you not to reply at all. Don't assume I'm the typical xda idiot, assume I'm the most intelligent person you've ever spoke to, then go from there with your next reply.
SG_Shadow said:
I really wouldn't except this behavior from you, but I see we all fall from grace every now and again. I've posted in that thread already, no one can seem to come up with an intelligent response. I followed all the instructions in both adb help threads for proper installation on my laptop. If you don't know the answer to what I'm seeking, I would honestly prefer you not to reply at all. Don't assume I'm the typical xda idiot, assume I'm the most intelligent person you've ever spoke to, then go from there with your next reply.
Click to expand...
Click to collapse
you posted a couple of hours ago, duplicating posts might be considered spam
you didn't really give any useful information in your post(s)
and if I were to assume your were, then this is just some boring role play thing at a job interview or something, as you wouldn't really need anyones help on this.
Everyone, Chill it.
We don't need a flame war.
Check your firewall. Make sure it's not blocking the connection. Also, are you using the same USB cord on both machines?
ivanmmj said:
Everyone, Chill it.
We don't need a flame war.
Check your firewall. Make sure it's not blocking the connection. Also, are you using the same USB cord on both machines?
Click to expand...
Click to collapse
Thank you for trying to "actually" assist me. I am using the exact same usb cable on purpose to rule that out as a reason. I've also recently update both computers to the latest norton antivirus. Like I stated the drivers install on the laptop and I'm able to connect the G1 for file transfers, so I assume the driver is working but when I type in adb device or adb shell in cmd, I get the no device msg. I'm really stumped with this one...
*Update* My norton did remove adb.exe from windows\system32 on both computers, but I was able to restore that file on both. Like I said, my pc works just fine, laptop no good...
And point 3
Install linux ( ubuntu 10.4 )
Just give it 10gb
It will eliminate hardware faults as being the problem
The android developer has a tutorial for 10.4, so it should be easy
( no need for drivers, aparently 10.4 ships with the android udev rule )
the driver for file transfer isnt the same as the driver for adb....so your logic is flawed
seriously tho, use linux...wubi is pretty good now and u only need 4-10gb if u are only using it for android stuff
in my experience, windows, especially where norton is used, randomly breaks adb
The file transfer is done using the standard windows mass storage driver, not an android specific driver. Even if it's the same norton, try disabling it and see what happens. Also, trying removing the driver completely and reinstalling it again. I've had the issue happen also only when in windows and it's always something random.
virtualbox _should_ ( I think ) let you 'see' the Android Phone regardless of the drivers being installed on the Windows host
But, I have not tested that
Did you ever get this to work, I have the same issue?
I'm having the same issue, I'm trying to use ADB with my TF300T from a Windows 7 64 bit system. Always get the error adb error.
I have a couple of questions will this work correctly with a 64bit O.S?
Also the part of the instructions that reference SDCARD are they talking about the directory on my ASUS /sdcard/ or are they talking about the physical card?
Just need to know does it require you to have a sdcard in the ASUS to use adb?
May sound like fundamental questions to a lot of you, however I have combed through these forums as well as others all over the web, and the majority of instructions seem to be lacking the basics.
Thank you,
I have Ubuntu at work should I run ADB through this?
I have Ubuntu at work
It's a bit of a process according to the instructions that I have on the
screen right now to setup ADB through this, is there any gotchas that I should
know about before attempting this?
This is running on a VM on one of my servers. What I'm looking for is any known compatibility issues with versions of ADB and the Asus TF300T running .26
Thanks in advance.
Nordis

Cannot open ddms.bat in order to take screenshots on Nexus One

I wanted to take screenshots of my Nexus One (2.2 FRF91/T-Mobile/Stock) but I'm just a newbie so I followed the guide on andriodcentral Anrdroid 101 tips. (Sorry I can't link to it since I'm a new user on these forums
That guide led me to another guide on how to install the sdk
When I tried to pull my 3rd party apps, cmd didnt do anything it simply said "0 pulled, 0 skipped", however I was able to pull my standard apps. I'm confident the sdk was installed correctly though.
I'm using a laptop with Windows 7 64bit and an AMD processor, I'm not sure if that information is helpful or not
I've already downloaded and installed the android 2.2 sdk, java runtime environment, java development kit. I've also properly installed the ADB drivers for the Nexus One. I also downloaded Eclispe but when I tried to run it, the application won't open. I have a feeling its because I didn't install it properly.
My problem now is that the ddms.bat (Dalvik Debug Monitor) won't open when I double click on it. I tried to right click and run as administrator but that didn't work either. In both cases when I try to open it, a cmd windows opens for a fraction of a second and then closes before I can read it. So I googled it and found a website that seemed to be able to solve the problem but its geared towards linux users.
I specifically followed these directions "To fix this a replace of the bundled swt is needed. The file is located under android-sdk-linux_x86-1.5_r3/tools/lib/. Rename swt.jar to swt_32b.jar. Next download swt for your platform. I have used swt-3.4.2-gtk-linux-x86_64.zip. Unpack the file swt.jar in the zipfile to android-sdk-linux_x86-1.5_r3/tools/lib/ and finally start ddms" but that didnt work either. So now my android-sdk-windows/tools/lib/x86_64 is full of other files rather than just having that swt.jar file.
Can anyone please help on getting ddms.bat to open or on how to get eclipse to open?, I'm so close to being able to take screenshots.
Some notes:
1.I'm not interested in rooting (too worried about bricking my phone), so please don't recommend that I root first.
2. USB debugging was ON when I tried it
TaeKwonDonkey said:
1.I'm not interested in rooting (too worried about bricking my phone), so please don't recommend that I root first.
Click to expand...
Click to collapse
Do you have the right drivers installed?
When your phone is on, plugged in, SD not mounted, and USB turned on, you should see "Android Phone" and "Android Composite ADB Interface" underneath that.
If you don't want to root (it's so easy and painless if you can follow instructions) then I don't know what to tell you other than:
1. Install "USB Deview" and remove all HTC/Google/Android related drivers.
2. Completely uninstall and wipe out the SDK stuff.
3. Rebooted, and reinstall Android SDK, and make sure that Windows7 installs the right drivers.
Installing the SDK is no more difficult than installing any other piece of software. If you've got Java installed, and you've plugged your phone in, and debugging is turned on, what *should* happen when you double-click ddms.bat is, the command prompt window opens, but then the Debug utility should open.
I had the screenshots stuff working before I ever rooted.
I followed the steps here: http://www.knowyourcell.com/google/...take_screenshots_on_the_google_nexus_one.html
Rooting is easy and painless. If you root, you don't have to flash a custom ROM or anything, but then you can install an app that you simply open, enable, then whenever you're doing something that you want to take a screenshot of, you shake the phone, and there it is.

Lenovo Ideapad K1 One-Click Root (Mostly)

First, please forgive me if this is posted in the wrong section. It seemed most appropriate.
Second, I take no credit for anything here except for writing the .bat file here used to do the work, as well as assembling the files as per the original post.
All credit goes to djmwj and his article found here:
http://rootzwiki.com/topic/8722-lenovo-ideapad-k1-rooting-guide-messy/
As the title states, it was very messy. The OP figured out how to make it go, but it was a bit fuzzy to follow. So, I thought I'd help folks out a bit and clean things up.
So, I took the instructions presented in the OP, and condensed them into one download with one .bat that does everything from start to finish, minus installing the respective drivers for ADB and NVFlash. However, the drivers are included in the download.
Instructions:
1. Extract K1Root.rar to the directory of your choosing.
2. Connect your tablet to your PC with the USB cable.
3. With your tablet off, press POWER+VOL_UP+VOL_DOWN until the screen turns on, but displays only black.
4. Windows should detect the device, but not install drivers.
5. Go into device manager, select the APX device, choose update drivers, and install the drivers from the aptly named NVFlash_Drivers folder.
6. Open up the NVFLASH_HOME folder and run the file K1Flash.bat
7. Make your desired choices when prompted, and enjoy.
Notes (PLEASE READ BEFORE USING):
THERE MAY BE BUGS! I used it on my own stuff before releasing, and all of the essential components work as they should, however, there may possibly be a minor hiccup somewhere in the script. This should not damage anything. If you have doubts, you're welcome to examine the .bat and check it for yourself.
Please be gentle. I am not a full-time developer. I just wrote this to help make the process simpler for people.
The OP suggests you download and read the partition table, and then name the backup files based on that. This script names the backup files based on the flash.cfg script referenced in the OP, which is what controls the flashes used anyway. So, there shouldn't be any irregularities, however, I can't speak for every device on the planet.
This does NOT use the latest OTA updates. The rooted files being flashed are the default ones from the original download. You can easily adapt this to any files generated from the latest OTA files by simply dropping them in the NVFLASH_HOME file.
To install the SU properly, you have to install ADB drivers midway through the script. There's probably a way around this, but I didn't find it to be too inconvenient.
The ADB drivers are also located in the NVFLASH_HOME folder. Just do like you did when installing drivers in step #5, but instead point to NVFLASH_HOME.
Um...um...
That should be it. Obviously, use at your own risk. Let me know if there are problems with the script, and I will fix them.
Oh, and party on, Wayne.
http://www.megaupload.com/?d=AG10XE25
EDIT:
Attached is an updated .bat file which fixes a few errors in the original script, plus adds more userability. Just extract to the NVFLASH_HOME folder and run.
digitalhigh said:
First, please forgive me if this is posted in the wrong section. It seemed most appropriate.
Click to expand...
Click to collapse
You may want to change the title to Ideapad K1, I don't know if this will work for the Thinkpad tablet.
Thanks for this, I just picked up this tablet ($250 at staples) and was worrying about having to tackle linux and "compiling" just to be able to get hulu.com working. You're a lifesaver.
gallahad2000 said:
You may want to change the title to Ideapad K1, I don't know if this will work for the Thinkpad tablet.
Thanks for this, I just picked up this tablet ($250 at staples) and was worrying about having to tackle linux and "compiling" just to be able to get hulu.com working. You're a lifesaver.
Click to expand...
Click to collapse
Wow. Yeah, I'm pretty sure the key used is just for the Ideapad. Thanks for pointing that out. My dumb a$$ must've blanked out and just used the group name when posting.
And just to be fair, the original poster does include everything needed to do stuff in windows as well - it's just very hard to discern from the post.
question
Is anyone working on a custom ROM for this tablet? I am hopeing that there will be at least a few custom roms available at some point in the near future.
jfkerekes said:
Is anyone working on a custom ROM for this tablet? I am hopeing that there will be at least a few custom roms available at some point in the near future.
Click to expand...
Click to collapse
We need to be able to root and unlock the bootloader first.
Does the root method work on the 121211 update?
Or is there a way to flash back to the older firmware?
the OTA update 12 12 11.... seems to be update.zip style with no .img files inside. just loose files like normal rom updates. doesnt seeem like you can drop the files in as suggested. or i have the wrong OTA....
oh and is this for LINUX as the OP or work in windows too??
Hi, I was wondering, is this procedure works for the Lenovo ThinkPad 1838-25U? I'm thinking to buy it to give a test ride, i sold my Transformer 101 to buy the Prime but it seems like Asus is taking vacations on the delivery shipments. Is this a good tablet? or is better to wait for another version?
READ THE POST
IDEApad not THINKpad. no it wont work.
First of all- thank you so much for creating this script! I have been putting off rooting this device due to the "messy" nature of the original post.
I was hoping you could help me troubleshoot, I have tried both the new K1 root application and the original .bat file. I know the drivers are working because the script makes it as far as creating and formatting partitions and successfully pushes the bootlooder.bin but then:
bootloader.bin sent successfully
file not found: recovery.img
failed executing command 2147483647 NvError 0x4
command failure: create failed
I've tried everything I can think of... any ideas?
Thanks again.
I found problem.
after root done follow step. I cannot factory reset and update any ota.
anyone can help me ?
taiz said:
I found problem.
after root done follow step. I cannot factory reset and update any ota.
anyone can help me ?
Click to expand...
Click to collapse
Yes you have to roll-back to 04 stock and then apply the OTA's
Backup of the stock lenovo .apks!
File 1:http://www.mediafire.com/?r7iskr3wrfx4u01
File 2:http://www.mediafire.com/?fymdv9e9kmj332s
File 3:http://www.mediafire.com/?w33k205ej4fpbcl
A big thanks to Khanning who was nice enough to walk me through the adb commands and bear with me when I couldn't get adb over usb to work.
This may fix your issues http://forum.xda-developers.com/showpost.php?p=21309379&postcount=50
Can someone help I used this and I installed drivers from the drivers folder fine ....I ran option 1 fine and it said completed but said something about nvflash error make sure drivers are installed ....but on my tablet it said phone update success ....when I try option three to flash image it just stays at nvflash started and goes no further and when I try to install Su it won't connect adb , probably cause adb drivers wouldnt install ....any advice ....device is booting and seems stock ....it did not wipe my files either
Sent from my HTC EVO 3D X515a using XDA App
maek_it_happen said:
Can someone help I used this and I installed drivers from the drivers folder fine ....I ran option 1 fine and it said completed but said something about nvflash error make sure drivers are installed ....but on my tablet it said phone update success ....when I try option three to flash image it just stays at nvflash started and goes no further and when I try to install Su it won't connect adb , probably cause adb drivers wouldnt install ....any advice ....device is booting and seems stock ....it did not wipe my files either
Sent from my HTC EVO 3D X515a using XDA App
Click to expand...
Click to collapse
It means you are not in APX mode. Read the PDF and follow the instructions for installing the APX drivers. This should fix your issues.http://forum.xda-developers.com/show...9&postcount=50
I just completed step 3 flashing the image went fine up to bootloader .bin sent successfully ...then it says
File not found recovery.img
Failed executing command 2147473647 Nverror 0x4
Command failure : create failed
Edit the link u posted is not working and the drivers are installed
Edit 2 I just downloaded ur v2 root tool in ur other thread ....for some reason ur flash me Command actualy went past the recovery img error I was having with this tool .... But yours is flawless
Sent from my HTC EVO 3D X515a using XDA App
maek_it_happen said:
Edit 2 I just downloaded ur v2 root tool in ur other thread ....for some reason ur flash me Command actualy went past the recovery img error I was having with this tool .... But yours is flawless
Click to expand...
Click to collapse
Glad to hear it worked for you.
TD
I recently got this device and looking for a way to root this device without having to roll back to the factory default rom and then having to update again using OTA.
Question, am I in luck, is that at all possible or do I have to really rollback and reinstall everything again?
Thanks!
Sent from my K1 using Tapatalk
Anyone have the root? Megaupload is down forever.

Nexus 7 Driver Failure

Please don't troll, my first post
So, my Nexus 7came a few days ago, and since then I've been playing around with it a lot.
Yesterday I decided I was going to root the beautiful tablet.
I plugged it into my laptop (Windows 7 64bit) and then I saw an error whilst it tried to install the drivers.
It had two crosses by the two drivers it was trying to install.
I plugged it into another laptop (Windows Vista 32bit) and it installed the drivers perfectly and quickly.
I understand that I have to have the Nexus 7 plugged in to root it, and so now I am highly confused and annoyed.
My laptop doesn't recognize it and it doesn't appear in Computer.
Any ideas?
Thanks.
If you need anymore information, just let me know! (=
Works fine for me after about 10 minutes of searching and reading. No need to add to the thread clutter.
RajanB said:
Please don't troll, my first post
So, my Nexus 7came a few days ago, and since then I've been playing around with it a lot.
Yesterday I decided I was going to root the beautiful tablet.
I plugged it into my laptop (Windows 7 64bit) and then I saw an error whilst it tried to install the drivers.
It had two crosses by the two drivers it was trying to install.
I plugged it into another laptop (Windows Vista 32bit) and it installed the drivers perfectly and quickly.
I understand that I have to have the Nexus 7 plugged in to root it, and so now I am highly confused and annoyed.
My laptop doesn't recognize it and it doesn't appear in Computer.
Any ideas?
Thanks.
If you need anymore information, just let me know! (=
Click to expand...
Click to collapse
Follow instructions in the Nexus 7 Root Toolkit
http://forum.xda-developers.com/showthread.php?t=1766475
Remember to scroll all the way down in each individual window of the guide to setting up the drivers. I drove myself crazy before I realized that I had missed something important. Also if your desktop is 64bit, you have to use the 64bit drivers. Good luck!
RajanB said:
Please don't troll, my first post
So, my Nexus 7came a few days ago, and since then I've been playing around with it a lot.
Yesterday I decided I was going to root the beautiful tablet.
I plugged it into my laptop (Windows 7 64bit) and then I saw an error whilst it tried to install the drivers.
It had two crosses by the two drivers it was trying to install.
I plugged it into another laptop (Windows Vista 32bit) and it installed the drivers perfectly and quickly.
I understand that I have to have the Nexus 7 plugged in to root it, and so now I am highly confused and annoyed.
My laptop doesn't recognize it and it doesn't appear in Computer.
Any ideas?
Thanks.
If you need anymore information, just let me know! (=
Click to expand...
Click to collapse
Have you downloaded these yet they are new out.
http://forum.xda-developers.com/showthread.php?t=1796165
Install the android sdk. Go to device manager and find your nexus, right click and update driver software. Search computer, select all locations (or something like that) then have disk and browse to your installation. Uh underneath extras there is a folder with the driver you're going to select.
I'm at work so that's a general idea, Google "cyanogenmod adb driver install" and skip the part about replacing the file with a custom one since the nexus is included by default.
Sent from my LG-P999 using xda app-developers app
mi7chy said:
Works fine for me after about 10 minutes of searching and reading. No need to add to the thread clutter.
Click to expand...
Click to collapse
Sorry. Where did you search and read apart from Google? Links please?
Ok, so I done what you guys recommended, in order of when you posted, and non of the suggestions worked.
A screenshot of what happens is attached.
Thanks.
The image didn't attach :S
Wow... user has 4 total posts, all in this one thread and saying nothing worked.
Did you try
Rock-&-Roll-Hedgehog said:
Have you downloaded these yet they are new out.
http://forum.xda-developers.com/showthread.php?t=1796165
Click to expand...
Click to collapse
That will get your the ASUS drivers which will should work on your computer.
All of the root kits also include drivers and they are not that hard to install.
krelvinaz said:
Wow... user has 4 total posts, all in this one thread and saying nothing worked.
Did you try
That will get your the ASUS drivers which will should work on your computer.
All of the root kits also include drivers and they are not that hard to install.
Click to expand...
Click to collapse
Yep. Tried that aswell... if it had worked I wouldn't of come back to ask if anyone had any other ideas as to why it doesn't work..
I thought it was possible to ask questions on here without people saying stuff like that...
clearly you are doing something wrong because the drivers work.
If you need help, you need to provide more details on what you are trying and what the issue is when you try to install... Not just an image of what happens when you plug the device in. That part is obvious that you don't have the drivers installed.
So of the various methods of getting drivers, which ones did you try and what did they say when you tried loading them?
krelvinaz said:
clearly you are doing something wrong because the drivers work.
Click to expand...
Click to collapse
Ok, let me run you through what I'm doing here...
I opened up the zip containing the files.
These are the files that I am greeted with;
amd64
i386
android_winusb
androidwinusb86
androidwinusb64
source.properties
Now what? (=
Those are the drivers... now you need to load them.... Not using Vista for many years... did a simple google search and found...
Code:
Windows Vista
To install the Android USB driver on Windows Vista for the first time:
Connect your Android-powered device to your computer's USB port. Windows will detect the device and launch the Found New Hardware wizard.
Select Locate and install driver software.
Select Don't search online.
Select I don't have the disk. Show me other options.
Select Browse my computer for driver software.
Click Browse and locate the USB driver folder. (The Google USB Driver is located in <sdk>\extras\google\usb_driver\.) As long as you specified the exact location of the installation package, you may leave Include subfolders checked or unchecked—it doesn't matter.
Click Next. Vista may prompt you to confirm the privilege elevation required for driver installation. Confirm it.
When Vista asks if you'd like to install the Google ADB Interface device, click Install to install the driver.
Or, to upgrade an existing Android USB driver on Windows Vista with the new driver:
Connect your Android-powered device to your computer's USB port.
Right-click on Computer from your desktop or Windows Explorer, and select Manage.
Select Device Manager in the left pane.
Locate and expand ADB Interface in the right pane.
Right-click on Listed Nexus 7 Device, and select Update Driver Software.
When Vista starts updating the driver, a prompt will ask how you want to search for the driver software. Select Browse my computer for driver software.
Click Browse and locate the USB driver folder. (The Google USB Driver is located in <sdk>\extras\google\usb_driver\.) As long as you specified the exact location of the installation package, you may leave Include subfolders checked or unchecked—it doesn't matter.
Click Next. Vista might prompt you to confirm the privilege elevation required for driver installation. Confirm it.
When Vista asks if you'd like to install the Google ADB Interface device, click Install to upgrade the driver.
Change the location in the instructions to where you unloaded those USB drivers and you should be on your way...
Try pdanet drivers, just Google pdanet install the proper one(can't remember if they have a 32 bit or 64 bit)
I used their drivers to root the n7. If they don't have asus drivers just.click I don't know. Don't remember exactly the installation step by step, but.its easy enough to get through
Sent from my Nexus 7 using Tapatalk 2
BrianDigital said:
Try pdanet drivers, just Google pdanet install the proper one(can't remember if they have a 32 bit or 64 bit)
I used their drivers to root the n7. If they don't have asus drivers just.click I don't know. Don't remember exactly the installation step by step, but.its easy enough to get through
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Tried that. It all installed correctly, it just won't show up in Computer so I can view my files.
I have unlocked my bootloader... if that helps, which means that Nexus Root Kit 1.5.2 can detect that the Nexus 7 is plugged in.
RajanB said:
Tried that. It all installed correctly, it just won't show up in Computer so I can view my files.
I have unlocked my bootloader... if that helps, which means that Nexus Root Kit 1.5.2 can detect that the Nexus 7 is plugged in.
Click to expand...
Click to collapse
So your having an issue with mtp stuff. Go into setting then click on storage then hit the three dots on the top right corner. Just make sure media device is checked.
Reboot the computer and try a different USB port. These are just so basic steps just do that and see what happens
Sent from my Nexus 7 using Tapatalk 2
BrianDigital said:
So your having an issue with mtp stuff. Go into setting then click on storage then hit the three dots on the top right corner. Just make sure media device is checked.
Reboot the computer and try a different USB port. These are just so basic steps just do that and see what happens
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Ok. Done all that, still the same.
And it now comes up with what you can see in the attached image.
RajanB said:
Sorry. Where did you search and read apart from Google? Links please?
Click to expand...
Click to collapse
search and read the same forums you posted your question in. try the nexus 7 development forum to start.
Sent from my Nexus 7 using xda premium
RajanB said:
Ok. Done all that, still the same.
And it now comes up with what you can see in the attached image.
Click to expand...
Click to collapse
ok seriously..... search these forums for nexus root toolkit 1.5. install that and follow the prompts for installing drivers
Sent from my Nexus 7 using xda premium
uberNoobZA said:
ok seriously..... search these forums for nexus root toolkit 1.5. install that and follow the prompts for installing drivers
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
The driver he is having issues with is mtp. This might be a windows error.
I sent you a pm OP
Sent from my Nexus 7 using Tapatalk 2

Categories

Resources