Database Develop

Help! i just update to 20d gingerbread. and try to root....

and i try to unlock uing the megatron....
and i keep getting error..
already tried with 2 comptuers...
[*]
[*] Megatron: LG Optimus 3D/Thrill Root Exploit (Windows version)
[*] by Dan Rosenberg (@djrbliss)
[*]
[*] Before continuing, ensure USB debugging is enabled, that you
[*] have the latest LG drivers installed, and that your phone
[*] is connected via USB.
[*]
[*] Press enter to root your phone...
Press any key to continue . . .
[*]
[*] Waiting for device...
[*] Device found.
[*] Deploying payload...
2078 KB/s (564396 bytes in 0.265s)
pkg: /data/local/tmp/evil.apk
Success
[*] Owning phone...
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Writing to block device...
4 KB/s (4322 bytes in 1.000s)
[*] Searching block device for string, this may take a minute.
[*] Pushing root tools to device...
* daemon not running. starting it now *
* daemon started successfully *
1399 KB/s (22364 bytes in 0.015s)
2112 KB/s (843503 bytes in 0.390s)
[*] Rebooting device again...
[*] Waiting for phone to reboot.
[*] Getting root...
cp: cannot create '/system/bin/su': Read-only file system
Unable to chmod /system/bin/su: No such file or directory
Unable to chmod /system/bin/su: No such file or directory
link failed Read-only file system
cp: cannot create '/system/app/Superuser.apk': Read-only file system
Unable to chmod /system/app/Superuser.apk: No such file or directory
[*] Cleaning up...
cp: cannot stat '/data/local/run-as.bak': No such file or directory
su: permission denied
su: permission denied
rm failed for /data/local/run-as.bak, No such file or directory
Success
[*] Rebooting...
error: protocol fault (no status)
[*] Exploit complete!
[*] Press any key to exit.
Press any key to continue . . .

davidliu21 said:
and i try to unlock uing the megatron....
and i keep getting error..
already tried with 2 comptuers...
[*]
[*] Megatron: LG Optimus 3D/Thrill Root Exploit (Windows version)
[*] by Dan Rosenberg (@djrbliss)
[*]
[*] Before continuing, ensure USB debugging is enabled, that you
[*] have the latest LG drivers installed, and that your phone
[*] is connected via USB.
[*]
[*] Press enter to root your phone...
Press any key to continue . . .
[*]
[*] Waiting for device...
[*] Device found.
[*] Deploying payload...
2078 KB/s (564396 bytes in 0.265s)
pkg: /data/local/tmp/evil.apk
Success
[*] Owning phone...
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Writing to block device...
4 KB/s (4322 bytes in 1.000s)
[*] Searching block device for string, this may take a minute.
[*] Pushing root tools to device...
* daemon not running. starting it now *
* daemon started successfully *
1399 KB/s (22364 bytes in 0.015s)
2112 KB/s (843503 bytes in 0.390s)
[*] Rebooting device again...
[*] Waiting for phone to reboot.
[*] Getting root...
cp: cannot create '/system/bin/su': Read-only file system
Unable to chmod /system/bin/su: No such file or directory
Unable to chmod /system/bin/su: No such file or directory
link failed Read-only file system
cp: cannot create '/system/app/Superuser.apk': Read-only file system
Unable to chmod /system/app/Superuser.apk: No such file or directory
[*] Cleaning up...
cp: cannot stat '/data/local/run-as.bak': No such file or directory
su: permission denied
su: permission denied
rm failed for /data/local/run-as.bak, No such file or directory
Success
[*] Rebooting...
error: protocol fault (no status)
[*] Exploit complete!
[*] Press any key to exit.
Press any key to continue . . .
Click to expand...
Click to collapse
try this one

that's the one i used....

Try super one click I don't remember how I rooted I can try later maybe I would have to flash it tho
sent from my acidhazard thrill

I rooted m lg thrill with megatron in windows 7. I didnt have any problem. You can try this.

Ok finally ive tried 3 comouters , non of them works all windows 7 and i use a old computer running windows xp. And it works like a charm lol
Sent from my LG-P925 using XDA

I'm glad ya got it working, but it should of worked fine on win7. Ive been on 7 sense it came out and use nothing else.

davidliu21 said:
and i try to unlock uing the megatron....
and i keep getting error..
already tried with 2 comptuers...
[*]
[*] Megatron: LG Optimus 3D/Thrill Root Exploit (Windows version)
[*] by Dan Rosenberg (@djrbliss)
[*]
[*] Before continuing, ensure USB debugging is enabled, that you
[*] have the latest LG drivers installed, and that your phone
[*] is connected via USB.
[*]
[*] Press enter to root your phone...
Press any key to continue . . .
[*]
[*] Waiting for device...
[*] Device found.
[*] Deploying payload...
2078 KB/s (564396 bytes in 0.265s)
pkg: /data/local/tmp/evil.apk
Success
[*] Owning phone...
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Writing to block device...
4 KB/s (4322 bytes in 1.000s)
[*] Searching block device for string, this may take a minute.
[*] Pushing root tools to device...
* daemon not running. starting it now *
* daemon started successfully *
1399 KB/s (22364 bytes in 0.015s)
2112 KB/s (843503 bytes in 0.390s)
[*] Rebooting device again...
[*] Waiting for phone to reboot.
[*] Getting root...
cp: cannot create '/system/bin/su': Read-only file system
Unable to chmod /system/bin/su: No such file or directory
Unable to chmod /system/bin/su: No such file or directory
link failed Read-only file system
cp: cannot create '/system/app/Superuser.apk': Read-only file system
Unable to chmod /system/app/Superuser.apk: No such file or directory
[*] Cleaning up...
cp: cannot stat '/data/local/run-as.bak': No such file or directory
su: permission denied
su: permission denied
rm failed for /data/local/run-as.bak, No such file or directory
Success
[*] Rebooting...
error: protocol fault (no status)
[*] Exploit complete!
[*] Press any key to exit.
Press any key to continue . . .
Click to expand...
Click to collapse
Spent hours and hours spread across many days trying to find out what happened. All you need to do is hard reset your phone and take out Micro SD card. Restart your computer to eliminate any usb driver conflicts (don't really need to do this step but you never know). Then run megatron_windows.

help about unlockbootloader X8,W8

here is my log...
i keep failed with unlock my bootloader on my x8,w8(root and checked unknown sources&usb debugging)
i edi do..some 1 know what problem with my step?
process requires standard 2.x android firmware.
Premere un tasto per continuare . . .
Getting ROOT rights.
* daemon not running. starting it now *
* daemon started successfully *
cannot stat 'bootTools\rageagainstthecage': No such file or directory
Unable to chmod /data/local/tmp/expl: No such file or directory
/data/local/tmp/expl: not found
Waiting ...
Removing NAND MPU restrictions via SEMC backdoor. Permanent. Require ROOT rights
.
3 KB/s (3087 bytes in 1.000s)
Unable to open router port: Permission denied
Diag_LSM: Diag_LSM_Init: Failed to open handle to diag driver, error = 13 ERR :
MSG Open handle failed, unable to open program 30eeeeee ver 10001 NOT FOUND
:FILE vendor/qcom-proprietary-qsd8k/oncrpc/oncrpc/oncrpc_cb.c:LINE 231:ARG1 82
0965102:ARG2 65537:ARG3 0:
ERR :MSG Couldn't setup RPC call :FILE vendor/qcom-proprietary-qsd8k/oncrpc/on
crpc/oncrpc_cb.c:LINE 276:ARG1 0:ARG2 0:ARG3 0:
Error: Failed to lookup client for 0x30EEEEEE 0x00010001
FATAL :MSG Failed to lookup RPC client. prog = 820965102, vers = 65537, tout =
0 :FILE vendor/semc/system/core/miscta/libmiscta/rpc_service.c:LINE 65:ARG1 820
965102:ARG2 65537:ARG3 0:
reboot: Operation not permitted
Waiting ...
Getting ROOT rights.
/data/local/tmp/expl: not found
Waiting ...
Writing patched semcboot. Two step process
First, we need get access to semcboot area
502 KB/s (8064 bytes in 0.015s)
insmod: init_module '/data/local/tmp/mapper_2.6.29.ko' failed (Operation not per
mitted)
Second, we need to write semcboot
3054 KB/s (588228 bytes in 0.188s)
can't find userdate partition
Premere un tasto per continuare . .

I would suggest unlocking while with the stock 2.1 firmware. Root it and try again.
Sent from my E15i using xda app-developers app

Chris95X8 said:
I would suggest unlocking while with the stock 2.1 firmware. Root it and try again.
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
okie.i try it . thank you.

Do what Chris95X8 suggested. And also TURN OFF your antivirus before doing all of this. If it still says files are missing, redownload everything and unlock your bootloader while your antivirus is off.
Sent from my X8 using Tapatalk 2

My SIM Card is not recognised after unlocking phone with msm7227_setool2.cmd!

hi, i unlocked my bootloader with this tutorial
http://forum.xda-developers.com/showthread.php?t=1254225
but it won't recorgnise the SIM card and it won't connect to the network.
at the topic it says: 1.
My SIM Card is not recognised after unlocking phone with msm7227_setool2.cmd!
Ans: Redo unlocking procedure (step 5 onwards) using msm7227_semc.cmd.
but i get this error.
Code:
process requires standard 2.x android firmware.
Πιέστε ένα πλήκτρο για συνέχεια. . .
Getting ROOT rights.
1047 KB/s (585731 bytes in 0.546s)
Failed to set prot mask (Inappropriate ioctl for device)
Waiting ...
Removing NAND MPU restrictions via SEMC backdoor. Permanent. Require ROOT rights
.
193 KB/s (3087 bytes in 0.015s)
success
Waiting ...
Getting ROOT rights.
Failed to set prot mask (Inappropriate ioctl for device)
Waiting ...
Writing patched semcboot. Two step process
First, we need get access to semcboot area
504 KB/s (8064 bytes in 0.015s)
insmod: can't insert '/data/local/tmp/mapper_2.6.29.ko': invalid module format
Second, we need to write semcboot ;)
812 KB/s (596916 bytes in 0.717s)
can't find userdate partition
Πιέστε ένα πλήκτρο για συνέχεια. . .
instead of
Code:
process requires standard 2.x android firmware.
Press any key to continue . . .
Getting ROOT rights.
1743 KB/s (585731 bytes in 0.328s)
error: protocol fault (no status)
Waiting ...
Removing NAND MPU restrictions via SEMC backdoor. Permanent. Require ROOT rights.
192 KB/s (3087 bytes in 0.015s)
success
Waiting ...
Getting ROOT rights.
Waiting ...
Writing patched semcboot. Two step process
First, we need get access to semcboot area
504 KB/s (8064 bytes in 0.015s)
Second, we need to write semcboot ;)
1130 KB/s (596916 bytes in 0.515s)
successfully wrote 0003ff00
Press any key to continue . . .
can u help me fix it? just installed MiniCM7 on this X8

please somebody.. respond :/

What is your phone's simlock certificate? Is it SEMC SIMLOCK Certificate or Not Recognized SIMLOCK Certificate? And have you tried to relock your phone's bootloader and check whether your SIM Card is recognized?

before i install MiniCm7 i think it was saying SEMC SIMLOCK Certificate...
and if i relock it the phone will be bricked :/
edit: made it sure. it's SEMC SIMLOCK Certifticate

respond please :/ i really need a solution

You can go back to stock ROM and stock kernel and then relock the bootloader. Please make sure though.

really good idea

that's the right kernel? http://forum.xda-developers.com/showthread.php?t=1567687&highlight=stock+kernel
and that the right rom? http://forum.xda-developers.com/showthread.php?t=1099931
i know how to flash the kernel, but how the rom? or do i have to flash the stock rom with the recovery from the custom kernel before i flash the stock kernel?

msm7227_setool.cmd
try this

[Q] MSM7227 stuck on waiting.

I was following the guide to unlock the bootloader for the Xperia X8 and have gotten here:
Code:
Getting ROOT rights.
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
1540 KB/s (585731 bytes in 0.731s)
error: protocol fault (no status)
Waiting...
Removing NAND MPU restrictions via SEMC backdoor. Permanent. Require ROOT rights.
66 KB/s (3087 bytes in 0.045s)
success
Waiting ...
Getting ROOT rights.
Waiting ...
It's been stuck on waiting for at least 15 minutes. There's also no USB Debugging notification, leading me to believe that the phone is disconnected. What should I do? Should I just reconnect the phone or redo the whole process?

Never mind. Just disconnected the phone and rebooted it and restarted the program and now it works.

Root Xperia Z1 (4.4.4 official), install recovery

Hello Sirs,
First of all, I did search about this topic and I couldn't find the answers I'm look for. (may be my search skills are so bad). I apologize if there is already a thread related to this.
So here is my issue.
1. Updated my Xperia Z1 (India) to official 4.4.4 update via OTA. I rooted the phone using EasyRootTool_v8. Everything looked good and I used root uninstaller app to uninstall Walkman (before backing up). Now I need it back because I felt Walkman 8.4.A.1.4 works better. So I tried to get it back by downloading the same exact walkman APK and put it in system folder with full permission and restarted the phone and that got installed. But everytime I restart the phone it says "Android is upgrading". After this when I try to open walkman it says "Unfortunately walkman has stopped"
2. So I tried to install the Dual Recovery and it says success, but with read only errors. The reason why I needed recovery it to flash everything from scratch and go back to 100% official built so walkman would work.
Here are the results of EasyRootTool v8 and Dual Recovery:
----
ROOT:
-----
==============================================
= =
= Easy Root Tool v8 =
= Supports various Xperia devices =
= created by zxz0O0 =
= =
= http://forum.xda-developers.com/ =
= showthread.php?p=53448680 =
= =
= Many thanks to: =
= - [NUT] =
= - geohot =
= - MohammadAG =
= - cubeundcube =
= - DooMLoRD =
= - nhnt11 =
= - xsacha =
= =
==============================================
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
Make sure you have only one Android device connected
BlueStacks emulator can also cause problems
=============================================
Device found!
=============================================
Getting device variables
=============================================
Device model is C6902
Firmware is 14.4.A.0.108
=============================================
Sending files
=============================================
/dev/kmem exists. Using files of cubeundcube...
50 KB/s (935 bytes in 0.018s)
3490 KB/s (657704 bytes in 0.184s)
43 KB/s (757 bytes in 0.017s)
1324 KB/s (9496 bytes in 0.007s)
785 KB/s (13672 bytes in 0.017s)
=============================================
Loading geohot's towelroot (modified by zxz0O0)
=============================================
2738 KB/s (112181 bytes in 0.040s)
pkg: /data/local/tmp/tr_signed.apk
Success
=============================================
Check your device and click "make it ra1n"
Waiting for towelroot to exploit...
.
========================================================================================
IT WAS STRUCK IN WAITING FOR TOWELROOT TO EXPLOIT FOR A LONG TIME, BUT THE DEVICE SAID ITS ROOTED, SO I CLOSED THE WINDOW.
========================================================================================
==============================================
= =
= PhilZ Touch, CWM and TWRP Dual Recovery =
= Maintained by [NUT] =
= =
= For Many Sony Xperia Devices =
= =
==============================================
[ 1. Installation on ROM rooted with SuperSU ]
[ 2. Installation on ROM rooted with SuperUser ]
[ 3. Installation on unrooted ROM using TowelRoot ]
[ 4. Exit ]
Please choose install action. [1,2,3,4]?3
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
Device found
=============================================
Step2 : Sending the recovery files.
=============================================
mkdir failed for /data/local/tmp/recovery, File exists
7 KB/s (29 bytes in 0.003s)
3077 KB/s (15759 bytes in 0.005s)
163 KB/s (501 bytes in 0.003s)
2312 KB/s (11842 bytes in 0.005s)
3688 KB/s (56662 bytes in 0.015s)
1002 KB/s (3082 bytes in 0.003s)
125 KB/s (385 bytes in 0.003s)
4429 KB/s (657704 bytes in 0.145s)
4515 KB/s (2982577 bytes in 0.645s)
4418 KB/s (2633802 bytes in 0.582s)
4549 KB/s (1896216 bytes in 0.407s)
2256 KB/s (9243 bytes in 0.004s)
=============================================
Step3 : Setup of dual recovery.
=============================================
=============================================
Attempting to get root access for installation using TowelRoot now.
NOTE: this only works on certain ROM/Kernel versions
If it fails, please check the development thread (Post #2) on XDA for more detai
ls.
REMEMBER THIS:
XZDualRecovery does NOT install any superuser app
You can use one of the recoveries to root your device.
=============================================
=============================================
Getting ro.build.product
=============================================
Device model is C6902
=============================================
Sending files
=============================================
116 KB/s (359 bytes in 0.003s)
2318 KB/s (9496 bytes in 0.004s)
2669 KB/s (13672 bytes in 0.005s)
=============================================
Loading modified towelroot (by geohot)
=============================================
Success
4507 KB/s (106178 bytes in 0.023s)
pkg: /data/local/tmp/tr_signed.apk
Success
=============================================
Check your phone and click "make it ra1n"
Waiting for towelroot to exploit...
.
========================================================================
Please help as I'm very very new to this..

First, correct me if I'm wrong. Walkman 8.4.A.1.4 is on Android 4.4.3, isn't it?

I don't think so. But I received this update for Walkman only after updating to 4.4.4. By the way. I managed to root install the recovery successfully. Just waiting for the stock rom download to complete so I can flash it.
Sent from my C6902 using XDA Free mobile app

Ferrard said:
Hello Sirs,
First of all, I did search about this topic and I couldn't find the answers I'm look for. (may be my search skills are so bad). I apologize if there is already a thread related to this.
So here is my issue.
1. Updated my Xperia Z1 (India) to official 4.4.4 update via OTA. I rooted the phone using EasyRootTool_v8. Everything looked good and I used root uninstaller app to uninstall Walkman (before backing up). Now I need it back because I felt Walkman 8.4.A.1.4 works better. So I tried to get it back by downloading the same exact walkman APK and put it in system folder with full permission and restarted the phone and that got installed. But everytime I restart the phone it says "Android is upgrading". After this when I try to open walkman it says "Unfortunately walkman has stopped"
2. So I tried to install the Dual Recovery and it says success, but with read only errors. The reason why I needed recovery it to flash everything from scratch and go back to 100% official built so walkman would work.
Here are the results of EasyRootTool v8 and Dual Recovery:
----
ROOT:
-----
==============================================
= =
= Easy Root Tool v8 =
= Supports various Xperia devices =
= created by zxz0O0 =
= =
= http://forum.xda-developers.com/ =
= showthread.php?p=53448680 =
= =
= Many thanks to: =
= - [NUT] =
= - geohot =
= - MohammadAG =
= - cubeundcube =
= - DooMLoRD =
= - nhnt11 =
= - xsacha =
= =
==============================================
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
Make sure you have only one Android device connected
BlueStacks emulator can also cause problems
=============================================
Device found!
=============================================
Getting device variables
=============================================
Device model is C6902
Firmware is 14.4.A.0.108
=============================================
Sending files
=============================================
/dev/kmem exists. Using files of cubeundcube...
50 KB/s (935 bytes in 0.018s)
3490 KB/s (657704 bytes in 0.184s)
43 KB/s (757 bytes in 0.017s)
1324 KB/s (9496 bytes in 0.007s)
785 KB/s (13672 bytes in 0.017s)
=============================================
Loading geohot's towelroot (modified by zxz0O0)
=============================================
2738 KB/s (112181 bytes in 0.040s)
pkg: /data/local/tmp/tr_signed.apk
Success
=============================================
Check your device and click "make it ra1n"
Waiting for towelroot to exploit...
.
========================================================================================
IT WAS STRUCK IN WAITING FOR TOWELROOT TO EXPLOIT FOR A LONG TIME, BUT THE DEVICE SAID ITS ROOTED, SO I CLOSED THE WINDOW.
========================================================================================
==============================================
= =
= PhilZ Touch, CWM and TWRP Dual Recovery =
= Maintained by [NUT] =
= =
= For Many Sony Xperia Devices =
= =
==============================================
[ 1. Installation on ROM rooted with SuperSU ]
[ 2. Installation on ROM rooted with SuperUser ]
[ 3. Installation on unrooted ROM using TowelRoot ]
[ 4. Exit ]
Please choose install action. [1,2,3,4]?3
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
Device found
=============================================
Step2 : Sending the recovery files.
=============================================
mkdir failed for /data/local/tmp/recovery, File exists
7 KB/s (29 bytes in 0.003s)
3077 KB/s (15759 bytes in 0.005s)
163 KB/s (501 bytes in 0.003s)
2312 KB/s (11842 bytes in 0.005s)
3688 KB/s (56662 bytes in 0.015s)
1002 KB/s (3082 bytes in 0.003s)
125 KB/s (385 bytes in 0.003s)
4429 KB/s (657704 bytes in 0.145s)
4515 KB/s (2982577 bytes in 0.645s)
4418 KB/s (2633802 bytes in 0.582s)
4549 KB/s (1896216 bytes in 0.407s)
2256 KB/s (9243 bytes in 0.004s)
=============================================
Step3 : Setup of dual recovery.
=============================================
=============================================
Attempting to get root access for installation using TowelRoot now.
NOTE: this only works on certain ROM/Kernel versions
If it fails, please check the development thread (Post #2) on XDA for more detai
ls.
REMEMBER THIS:
XZDualRecovery does NOT install any superuser app
You can use one of the recoveries to root your device.
=============================================
=============================================
Getting ro.build.product
=============================================
Device model is C6902
=============================================
Sending files
=============================================
116 KB/s (359 bytes in 0.003s)
2318 KB/s (9496 bytes in 0.004s)
2669 KB/s (13672 bytes in 0.005s)
=============================================
Loading modified towelroot (by geohot)
=============================================
Success
4507 KB/s (106178 bytes in 0.023s)
pkg: /data/local/tmp/tr_signed.apk
Success
=============================================
Check your phone and click "make it ra1n"
Waiting for towelroot to exploit...
.
========================================================================
Please help as I'm very very new to this..
Click to expand...
Click to collapse
So, get a backup of your phone, and then flash it again
That's the best way
But don't get naughty for the second time to uninstall sth from root unisntaller?
Have fun!

SaeedFazlollahzadeh said:
So, get a backup of your phone, and then flash it again
That's the best way
But don't get naughty for the second time to uninstall sth from root unisntaller?
Have fun!
Click to expand...
Click to collapse
===
I used Flashtool 0.9.16.1 to flash the stock Rom. Didn't exclude anything other than system, Now the device is brand new.. Walkman still wouldn't work
WHAT AM I DOING WRONG????
:crying:

Ferrard said:
===
I used Flashtool 0.9.16.1 to flash the stock Rom. Didn't exclude anything other than system, Now the device is brand new.. Walkman still wouldn't work
WHAT AM I DOING WRONG????
:crying:
Click to expand...
Click to collapse
Did you wipe data and cache and apps log?
Try another Rom, or even downgrade it
Sent from my C6903 using Tapatalk

SaeedFazlollahzadeh said:
Did you wipe data and cache and apps log?
Try another Rom, or even downgrade it
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
Tried 4.4.4 for two different sources - same issue. Yeah I wiped everything except SYSTEM because I wanted to retain the ROOT. But just WIPED everything... including system.. waiting for it to complete....

Ferrard said:
Tried 4.4.4 for two different sources - same issue. Yeah I wiped everything except SYSTEM because I wanted to retain the ROOT. But just WIPED everything... including system.. waiting for it to complete....
Click to expand...
Click to collapse
After flashing by flash tools, you'll lose your root access, I think
But you can lock your boot loader and then try again
Sent from my C6903 using Tapatalk

SaeedFazlollahzadeh said:
After flashing by flash tools, you'll lose your root access, I think
But you can lock your boot loader and then try again
Sent from my C6903 using Tapatalk
Click to expand...
Click to collapse
FIXED.. FIXED... FIXED.. So it was SYSTEM that was holding something related to Walkman... :laugh::good:
Thanks SaeedFazlollahzadeh

Ferrard said:
FIXED.. FIXED... FIXED.. So it was SYSTEM that was holding something related to Walkman... :laugh::good:
Thanks SaeedFazlollahzadeh
Click to expand...
Click to collapse
You're welcome
Have fun
Sent from my C6903 using Tapatalk