Related
This was not written by me. It was written by Ayman al-Sanad, username UAE (I believe), who has been working for some time to create workable libraries for so Android devices can properly display Arabic. Oddly there was no thread posted here that I can find so I'm going to go ahead and post it, since I know this is a much-desired feature for many people and at least some people will find it over Google or the like.
As Google has yet to add native support for Right-To-Left languages like Arabic, Persian and Urdu (despite it being the top feature request) Ayman stepped in and created libraries for our usage.
The downloads page is available here: http://ardoid.com/?page_id=5. I'm assuming the libraries will work with any Froyo install. Put the library zip on your SD card, flash it. Reboot will take some time on a black screen.
Big thanks to Ayman for his great work. Evo libraries are also available on his page.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this is the best news yet!!! i will try right now and report back
Works Perfect !!!!! i can't believe it's finally happening. thank you very much for posting
Dose this works with WebOS (Palm Pre) ?
amjz said:
Dose this works with WebOS (Palm Pre) ?
Click to expand...
Click to collapse
Really? Your in a forum for an ANDROID device, and if that wasn't enough of a hint, the OP says "ANDROID" in the first line.
works perfectly, Thanks for the heads up
Problem with ROM updates
The ZIP files on the ardoid.com site worked perfectly with my phone. This was when Verizon rolled out the Froyo update, and i was able to use the same ZIP files for both a stock ROM as well as a custom one.
But couple weeks ago, Verizon rolled out a minor update to Froyo (2.2.1 I think), and it was also picked up by some developers of custom ROMs. Once I applied any of these updates, I am unable to use the Arabic ZIP file anymore.
Here is what I usually do:
- Use the ROM Manager to download the new ROM.
- Reboot to recovery mode and apply the ROM (done automatically by the ROM Manager).
- Verify the ROM is working correctly.
- Download the Ariabic ZIP file from ardoid.con.
- Reboot to Custom Recovery, and manually apply the Arabic update.
- Reboot the phone one last time.
- The phone remains stuck in the HTC Incredible splash screen.
The only way out is to remove the battery, boot into recovery mode, and do a restore.
I tried this approach with the Virtuous ROM 3.1 and the CyanogenMod 6.1. In both cases, I was trying "froyo_incredible_libs_arabic_android_plus_signed.zip".
I also tried the following ZIP files, and they both failed (didn't expect them to work anyway):
- froyo_stock_generic_signed.zip
- froyo_cm_n1_6_1_1_stable_arabic_android_plus_signed.zip
The questions that I have are:
- Is there a dependency for the ZIP file on the actual system image? Does this mean that there has to be a new ZIP file for the 2.2.1 release?
- Is there another preferred way for applying the ZIP file? (I am using ClockworkMod Recover 2.5.0.5).
Quick update
I would like to add one little detail: using CyanogenMod 6.1, most apps have decent Arabic support by default (for example, tweetdeck or facebook). Unfortunately, the browser doesn't know how to join the Arabic letters correctly (doesn't matter if I am using the stock browser, or Dolphin).
I tried pushing the libwebcore.so and libskia.so files from the Desire HD ZIP from http://ardoid.com/?p=176
I copied the files to the SD card, then copied them over the original files using ADB. After the reboot, the phone got stuck in an endless loop, and here is what I saw repeated when doing "adb logcat":
W/dalvikvm( 1311): ERROR: Unable to find decl for native Landroid/webkit/BrowserFrame;.clearNativeCache ()V
E/JNIHelp ( 1311): RegisterNatives failed for 'android/webkit/BrowserFrame'
E/webcoreglue( 1311): WebFrame registration failed!
W/dalvikvm( 1311): JNI_OnLoad returned bad version (-1) in /system/lib/libwebcore.so 0x0
W/dalvikvm( 1311): Exception Ljava/lang/UnsatisfiedLinkError; thrown during Landroid/webkit/WebViewCore;.<clinit>
E/Zygote ( 1311): Error preloading android.webkit.WebViewCore.
E/Zygote ( 1311): java.lang.ExceptionInInitializerError
E/Zygote ( 1311): at java.lang.Class.classForName(Native Method)
E/Zygote ( 1311): at java.lang.Class.forName(Class.java:235)
E/Zygote ( 1311): at java.lang.Class.forName(Class.java:182)
E/Zygote ( 1311): at com.android.internal.os.ZygoteInit.preloadClasses(ZygoteInit.java:302)
E/Zygote ( 1311): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:589)
E/Zygote ( 1311): at dalvik.system.NativeStart.main(Native Method)
E/Zygote ( 1311): Caused by: java.lang.UnsatisfiedLinkError: Library webcore not found
E/Zygote ( 1311): at java.lang.Runtime.loadLibrary(Runtime.java:461)
E/Zygote ( 1311): at java.lang.System.loadLibrary(System.java:557)
E/Zygote ( 1311): at android.webkit.WebViewCore.<clinit>(WebViewCore.java:61)
E/Zygote ( 1311): ... 6 more
E/Zygote ( 1311): setreuid() failed. errno: 17
D/AndroidRuntime( 1311): Shutting down VM
W/dalvikvm( 1311): threadid=1: thread exiting with uncaught exception (group=0x4001d7f0)
D/skia ( 1311): purging 6K from font cache [1 entries]
I/ServiceManager( 105): service 'media.audio_flinger' died
I/ServiceManager( 105): service 'media.player' died
I/ServiceManager( 105): service 'media.camera' died
I/ServiceManager( 105): service 'media.audio_policy' died
I/ ( 1312): ServiceManager: 0xaec8
I think the root cause is "JNI_OnLoad returned bad version (-1) in /system/lib/libwebcore.so 0x0", but I am not sure what this means, or how to fix it.
Here is another update..
I tried to copy the libwebcore.so and libskia.so directly without the ZIP file. I basically extracted the two library files to a folder "Arabic/New" on my sdcard. The I did the following steps using ADB:
- remount the system mount as rw.
- copy the files from the SD to /system/lib
- change the permission to 644
- reboot
Here is the capture from my CMD console
===========================
C:\my_program_files\Android\android-sdk-windows\platform-tools>adb remount
remount succeeded
C:\my_program_files\Android\android-sdk-windows\platform-tools>adb shell
# su
su
# ls -l /system/lib/libwebcore.so
ls -l /system/lib/libwebcore.so
-rw-r--r-- 1 root root 4859848 Dec 22 19:08 /system/lib/libwebcore.so
# ls -l /system/lib/libskia.so
ls -l /system/lib/libskia.so
-rw-r--r-- 1 root root 1126112 Dec 22 19:08 /system/lib/libskia.so
# cp -f /sdcard/Arabic/New/libwebcore.so /system/lib
cp -f /sdcard/Arabic/New/libwebcore.so /system/lib
# cp -f /sdcard/Arabic/New/libskia.so /system/lib
cp -f /sdcard/Arabic/New/libskia.so /system/lib
# ls -l /system/lib/libwebcore.so
ls -l /system/lib/libwebcore.so
----rwxr-x 1 root root 5118240 Dec 22 19:11 /system/lib/libwebcore.so
# ls -l /system/lib/libskia.so
ls -l /system/lib/libskia.so
----rwxr-x 1 root root 1126552 Dec 22 19:11 /system/lib/libskia.so
# chmod 644 /system/lib/libwebcore.so
chmod 644 /system/lib/libwebcore.so
# chmod 644 /system/lib/libskia.so
chmod 644 /system/lib/libskia.so
# ls -l /system/lib/libwebcore.so
ls -l /system/lib/libwebcore.so
-rw-r--r-- 1 root root 5118240 Dec 22 19:11 /system/lib/libwebcore.so
# ls -l /system/lib/libskia.so
ls -l /system/lib/libskia.so
-rw-r--r-- 1 root root 1126552 Dec 22 19:11 /system/lib/libskia.so
# reboot
reboot
===========================
After the reboot, the phone gets stuck on the white screen
When I look at the log file via "adb logcat", I see it frozen at:
===========================
--------- beginning of /dev/log/main
I/cm ( 73): Welcome to Android 2.2.1 / CyanogenMod-6.1.0-Inc
I/cm ( 74): _
I/cm ( 75): __ __ _ ___ _ _ __ ___ __ _ _ _ _ __ __))
I/cm ( 76): ((_ \(/'((_( ((\( ((_)((_( (('((\( ((`1( ((_)((_(
I/cm ( 77): )) _))
I/cm ( 78):
I//system/xbin/run-parts( 68): modprobe: chdir(2.6.32.26-invisiblek-aosp): No such file or directory
I//system/xbin/run-parts( 68): run-parts: /system/etc/init.d/04modules exited with code 1
I/mountsd ( 93): Checking filesystems..
I//system/xbin/run-parts( 68): e2fsck 1.41.10 (10-Feb-2009)
I//system/xbin/run-parts( 68): e2fsck: Device or resource busy while trying to open /dev/block/mmcblk0p1
I//system/xbin/run-parts( 68): Filesystem mounted or opened exclusively by another program?
E/mountsd ( 99): Unable to repair filesystem, disabling apps2sd
I/logwrapper( 68): /system/xbin/run-parts terminated by exit(1)
I/DEBUG ( 108): debuggerd: Dec 12 2010 12:46:44
D/AK8973 ( 115): AK8973 daemon 1.3.3 Start
D/AK8973 ( 115): (Library version : 1.2.1.620)
--------- beginning of /dev/log/system
I/Vold ( 106): Vold 2.1 (the revenge) firing up
I/Netd ( 107): Netd 1.0 starting
D/Vold ( 106): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 106): Volume emmc state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 106): Volume emmc state changing 0 (No-Media) -> 2 (Pending)
D/Vold ( 106): Volume emmc state changing 2 (Pending) -> 1 (Idle-Unmounted)
D/Vold ( 106): Volume sdcard state changing 0 (No-Media) -> 2 (Pending)
D/Vold ( 106): Volume sdcard state changing 2 (Pending) -> 1 (Idle-Unmounted)
===========================
In comparison, when the phone was booting before, here is what the log would look like:
===========================
--------- beginning of /dev/log/main
I/cm ( 73): Welcome to Android 2.2.1 / CyanogenMod-6.1.0-Inc
I/cm ( 74): _
I/cm ( 75): __ __ _ ___ _ _ __ ___ __ _ _ _ _ __ __))
I/cm ( 76): ((_ \(/'((_( ((\( ((_)((_( (('((\( ((`1( ((_)((_(
I/cm ( 77): )) _))
I/cm ( 78):
I//system/xbin/run-parts( 68): modprobe: chdir(2.6.32.26-invisiblek-aosp): No such file or directory
I//system/xbin/run-parts( 68): run-parts: /system/etc/init.d/04modules exited with code 1
I/mountsd ( 93): Checking filesystems..
I//system/xbin/run-parts( 68): e2fsck 1.41.10 (10-Feb-2009)
I//system/xbin/run-parts( 68): e2fsck: Device or resource busy while trying to open /dev/block/mmcblk0p1
I//system/xbin/run-parts( 68): Filesystem mounted or opened exclusively by another program?
E/mountsd ( 99): Unable to repair filesystem, disabling apps2sd
I/logwrapper( 68): /system/xbin/run-parts terminated by exit(1)
I/DEBUG ( 108): debuggerd: Dec 12 2010 12:46:44
D/AK8973 ( 115): AK8973 daemon 1.3.3 Start
D/AK8973 ( 115): (Library version : 1.2.1.620)
--------- beginning of /dev/log/system
I/Vold ( 106): Vold 2.1 (the revenge) firing up
I/Netd ( 107): Netd 1.0 starting
D/Vold ( 106): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 106): Volume emmc state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 106): Volume emmc state changing 0 (No-Media) -> 2 (Pending)
D/Vold ( 106): Volume emmc state changing 2 (Pending) -> 1 (Idle-Unmounted)
D/Vold ( 106): Volume sdcard state changing 0 (No-Media) -> 2 (Pending)
D/Vold ( 106): Volume sdcard state changing 2 (Pending) -> 1 (Idle-Unmounted)
D/AndroidRuntime( 110):
D/AndroidRuntime( 110): >>>>>>>>>>>>>> AndroidRuntime START <<<<<<<<<<<<<<
I/AndroidRuntime( 110): Heap size: -Xmx32m
D/AndroidRuntime( 110): CheckJNI is OFF
D/dalvikvm( 110): creating instr width table
I/ ( 111): ServiceManager: 0xaec8
===========================
Are there any protection mechanisms that is preventing the phone from continuing the boot. If there is an issue with the library file, then I would expect a more specific error message when the library is loaded. However, it seems that the boot sequence is being aborted even before loading libwebcore.so or libskia.so
By the way, I have my phone rooted a long time ago. I think that was using the "unrevoked forever", and I have "SHIP S-OFF" on the main boot screen.
It finally worked!
I downloaded the ZIP file for the Cyanogn Nexus 6.1.1 from http://ardoid.com/?p=21 (I was starting from a CyanogenMod 6.1 for HTC Droid Incredible).
I repeated the same steps as before, but with the following exceptions:
- I copied the "libwebcore.so" file alone (didn't update the libskia.so).
- I rebooted the phone as usual rather than via ADB.
I am not sure which step made the difference, but at least my phone can boot, and most importantly, I can now see proper Arabic text in the browser. Other apps looks fine as well (tweetdeck, reader, etc.). I was even able to enter Arabic text using the browser (in Google search) and everything looked perfect.
I don't know what I might be missing by not updating ibskia.so, but things look really nice already.
Thanks Ayman for helping me out (via Twitter)!!!
I am working on something, been playing in the Kernel+initramfs corner all day.
Finally got the tab to boot, even if it doesnt draw a UI, its past the Bootlooping.
Problem is, I just dont understand what some of this stuff means, i am pretty green on the kernel level, and porting.
So, can yall pitch in, help me figure out what this stuff means. I would appreciate.
Jim
to much text to paste, so i will zip it an attach the file instead.
Whatever happened to this problem?
blacklevel said:
Whatever happened to this problem?
Click to expand...
Click to collapse
I had rebuilt the kernel and ramdisk, didnt want to bring that thread back to life.
regarding this LC, i see at least in my inexperience, the obvious Dbus issue, possible cache issue with the init, i have a theory that at a minimum fixing the sdcard mount issue might fix the cache issue, the dbus, well i am about to yank all references out of the init in hopes it fixes that issue as I think the source rom i am porting not having a dbus and my putting one in as the init was looking for one, may be the problem.
And in theory, the app and framework problems might be solved whgen the caching issue is fixed?
Am i on the right path?
You definitely need dbus running.
On my GSM tab with technomancers latest CM7 the first few lines in the logcat look like this:
Code:
--------- beginning of /dev/log/main
I/DEBUG ( 82): debuggerd: Aug 7 2011 19:55:51
--------- beginning of /dev/log/system
I/Vold ( 80): Vold 2.1 (the revenge) firing up
I/cm ( 106): Welcome to Android 2.3.5 / CyanogenMod-7-2011-08-07-Beta-GalaxyTab-KANG
I/cm ( 108): _
I/cm ( 110): __ __ _ ___ _ _ __ ___ __ _ _ _ _ __ __))
I/cm ( 111): ((_ \(/'((_( ((\( ((_)((_( (('((\( ((`1( ((_)((_(
I/cm ( 112): )) _))
I/cm ( 113):
D/Vold ( 80): Volume emmc state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 80): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 80): Volume emmc state changing 0 (No-Media) -> 2 (Pending)
D/Vold ( 80): Volume emmc state changing 2 (Pending) -> 1 (Idle-Unmounted)
D/Vold ( 80): Volume sdcard state changing 0 (No-Media) -> 2 (Pending)
D/Vold ( 80): Volume sdcard state changing 2 (Pending) -> 1 (Idle-Unmounted)
I/Netd ( 81): Netd 1.0 starting
D/Vold ( 80): USB connected
D/Vold ( 80): Share method ums now available
D/Vold ( 80): USB connected
I/logwrapper( 75): /system/xbin/busybox terminated by exit(0)
Yes, there are no references to dbus. But it is still running:
Code:
~# ps w
(...)
87 root 1272 S /system/bin/dbus-daemon --system --nofork
(...)
These are the corresponding lines the logcat you provided here:
Code:
--------- beginning of /dev/log/main
I/DEBUG ( 81): debuggerd: Aug 7 2011 19:55:51
I/cm ( 104): Welcome to Android 2.3.5 / CyanogenMod-7-2011-08-07-Beta-GalaxyTab-KANG
I/cm ( 106): _
W/libdbus ( 85): Failed to start message bus: Failed to open "/etc/dbus.conf": Permission denied
I/cm ( 108): __ __ _ ___ _ _ __ ___ __ _ _ _ _ __ __))
I/cm ( 110): ((_ \(/'((_( ((\( ((_)((_( (('((\( ((`1( ((_)((_(
I/cm ( 112): )) _))
I/cm ( 114):
I//system/xbin/busybox( 75): sysctl: /etc/sysctl.conf: No such file or directory
--------- beginning of /dev/log/system
I/Vold ( 79): Vold 2.1 (the revenge) firing up
E/Vold ( 79): Error reading configuration (No such file or directory)... continuing anyways
D/Vold ( 79): USB connected
D/Vold ( 79): Share method ums now available
I/Netd ( 80): Netd 1.0 starting
I/logwrapper( 75): /system/xbin/busybox terminated by exit(0)
You can see that both, dbus and vold are borked. Also /etc/sysctl.conf is not accessible. Maybe these problems are all for the same reason.
Can you check if /etc exists at all? It should be a symbolic link to /system/etc. Perhaps it is just that this link is not created. Perhaps the permissions of the /system/etc directory are wrong.
How is the initramfs configured?
I needed to update this thread.
Got past dbus, cache and /etc/sysctl.conf issue.
System booted to animated skating droid, and the 2 large issues currently are an EGL Bad Display, and Zygote. otherwise logcat looks ok so far.
I had to modify the init from the Sprint kernel i had originally released for the 2 Gingerbread roms for the tab, I removed all references to the GSM cache and partitions setup.
Right now, EGL and Zygote are my focus. I dont understand where the problem, is am basically running a sprint kernel 2.3.4 from source, so same video drivers.
I am so new to some of this more technical stuff, I have learned so much in past few days, but, i tool along as best I can
Great, you made some progress. How does the logcat currently look like?
i had builded the rom based on cm7 successfully,
then, i flash the rom to my i9000, and it stop at booting, showing red "kanged".
this is the log:
--------- beginning of /dev/log/system
I/Vold ( 116): Vold 2.1 (the revenge) firing up
D/Vold ( 116): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 116): Volume emmc state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 116): Volume sdcard state changing 0 (No-Media) -> 2 (Pending)
D/Vold ( 116): Volume sdcard state changing 2 (Pending) -> 1 (Idle-Unmounted)
D/Vold ( 116): Volume emmc state changing 0 (No-Media) -> 2 (Pending)
D/Vold ( 116): Volume emmc state changing 2 (Pending) -> 1 (Idle-Unmounted)
E/SocketListener( 117): Obtaining file descriptor socket 'dnsproxyd' failed: No such file or directory
E/SocketListener( 174): Obtaining file descriptor socket 'dnsproxyd' failed: No such file or directory
E/Netd ( 720): Unable to start DnsProxyListener (No such file or directory)
E/HAL ( 730): load: module=/vendor/lib/hw/gralloc.s5pc110.so
E/HAL ( 730): Cannot load library: reloc_library[1318]: 729 cannot locate '__android_log_print'...
E/FramebufferNativeWindow( 730): Couldn't get gralloc module
please help me!! thx
Trying to compile a rootbox vanilla build for qinara (4.2.2 / host:s2)
When I logcat e (error), I get this...
Code:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\John>cd android/sdk/platform-tools
C:\Users\John\Android\sdk\platform-tools>adb logcat d
- waiting for device -
^C
C:\Users\John\Android\sdk\platform-tools>adb logcat e
- waiting for device -
^C
C:\Users\John\Android\sdk\platform-tools>adb logcat e
- waiting for device -
--------- beginning of /dev/log/main
I/init.qcom.modem_links.sh( 157): modem_fw.mdt: No such file or directory
I/init.qcom.modem_links.sh( 157): /system/etc/init.qcom.modem_links.sh[83]: bre
ak: can't break
I/init.qcom.modem_links.sh( 157): /system/etc/init.qcom.modem_links.sh[170]: br
eak: can't break
D/ ( 261): MOTO_PUPD: mot_boot_mode
D/ ( 261): MOTO_PUPD: mot_boot_mode : normal
E/mm-camera( 259):
E/mm-camera( 259): Camera Daemon starting
D/QSEECOMD: ( 263): qseecom listener services process entry PPID = 1
D/QSEECOMD: ( 263): Parent qseecom daemon process terminated!!
D/QSEECOMD: ( 289): qseecom listener service threads starting!!!
D/QSEECOMD: ( 289): Total listener services to start = 2
D/QSEECOMD: ( 289): Init dlopen(libdrmfs.so, RTLD_NOW) succeeds
D/QSEECOMD: ( 289): Init::Init dlsym(g_FSHandle fs_start) succeeds
D/QSEECOMAPI: ( 289): QSEECom_register_listener 10 sb_length = 0x5000
D/DrmLibFs( 289): registering fs service to QSEECom is done!
D/DrmLibFs( 289): begin to create a thread!
D/DrmLibFs( 289): Creating a pthread in fs_start is done! return 0
D/QSEECOMD: ( 289): Init fs_start ret = 0
D/QSEECOMD: ( 289): file system services: Started
D/DrmLibFs( 289): Dispatch starts!
D/DrmLibFs( 289): before calling ioctl to read the next cmd
D/QDUMPD ( 286): Start polling.
D/BHD ( 285): Battery Health Daemon start!
I/ATVC ( 283): atvc_pal_production_part: start
I/ATVC ( 283): dbval_production_part: determined production part
I/ATVC ( 283): atvc_pal_init_factory_state: start
I/ATVC ( 283): atvc_pal_init_factory_state: determined out of factory state
I/ATVC ( 283): atval_pal_read_datablock: enter
I/ATVC ( 283): atval_pal_read_datablock: getting size of datablock
D/QDUMPD ( 286): dump polling (/dev/ramdump_smem)
D/QDUMPD ( 286): dump polling (/dev/coredump_riva)
D/QDUMPD ( 286): dump polling (/dev/ramdump_modem_sw)
I/DEBUG ( 273): debuggerd: Apr 21 2013 00:38:24
D/QDUMPD ( 286): dump polling (/dev/ramdump_riva)
D/QDUMPD ( 286): dump polling (/dev/ramdump_modem_fw)
I/installd( 279): installd firing up
D/QDUMPD ( 286): dump polling (/dev/coredump_modem)
I/graphicsd( 287): graphicsd - version: 1.0
I/graphicsd( 287): graphicsd - watching [/sys/class/kgsl/kgsl-3d0/snapshot/time
stamp][fd: 3]
D/BHD ( 285): EEPROM - Battery ID = 898bc7a41c0050b7
I/ATVC ( 283): atval_pal_read_datablock: exit
I/ATVC ( 283): atval_enforce_android_policy: validation failed. all disable
d.
I/ATVC ( 283): read handset resource access flags:
I/ATVC ( 283): 0x00000000
I/ATVC ( 283): atval_setup_properties: valid datablock - setting flags
D/BHD ( 285): NVM Read - Opened NVM file /pds/batt_health/batt-898bc7a41c00
50b7_0
E/mm-camera( 259): GETTING MCTL INFO
I/ATVC ( 283): atval_enforce_android_policy: finalize the properties
I/DMM ( 346): DMM available. movable_start_bytes at
--------- beginning of /dev/log/system
I/Vold ( 266): Vold 2.1 (the revenge) firing up
V/XTWiFi ( 354): [MessageQ] creating server socket
I/location-mq( 335): [XTWiFi-MessageQ] creating server socket
V/XTWiFi ( 354): [MessageQ] binding server socket to name [/data/misc/location
/mq/location-mq-s]
I/location-mq( 335): [XTWiFi-MessageQ] binding server socket to name [/data/mis
c/location/mq/location-mq-s]
D/Vold ( 266): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media
)
D/Vold ( 266): Volume usbdisk_1.1.1 state changing -1 (Initializing) -> 0 (N
o-Media)
D/Vold ( 266): Volume usbdisk_1.0 state changing -1 (Initializing) -> 0 (No-
Media)
D/Vold ( 266): Volume usbdisk_1.1 state changing -1 (Initializing) -> 0 (No-
Media)
D/Vold ( 266): Volume usbdisk_1.2 state changing -1 (Initializing) -> 0 (No-
Media)
D/Vold ( 266): Volume usbdisk_1.3 state changing -1 (Initializing) -> 0 (No-
Media)
D/Vold ( 266): Volume usbdisk_1.4 state changing -1 (Initializing) -> 0 (No-
Media)
D/Vold ( 266): Volume usbdisk_1.5 state changing -1 (Initializing) -> 0 (No-
Media)
D/Vold ( 266): Volume usbdisk_1.6 state changing -1 (Initializing) -> 0 (No-
Media)
D/Vold ( 266): Volume usbdisk_1.7 state changing -1 (Initializing) -> 0 (No-
Media)
I/cm ( 367): ____ _ _ ____ _ _ ____ ____ ____ _ _ _ _ ____ ___
I/Netd ( 272): Netd 1.0 starting
W/InterfaceController( 272): Warning (Cannot load library: load_library(linker.
cpp:771): library "/system/lib/libnetcmdiface.so" not found) while opening the n
et interface command library
I/rmt_storage( 338): Target is APQ8064: 1074105669
D/BHD ( 285): NVM Read - Read header, version = 1, file write count = 190,
time = Sun Apr 21 03:18:08 2013
D/BHD ( 285): NVM Read - Opened NVM file /pds/batt_health/batt-898bc7a41c00
50b7_1
D/BHD ( 285): NVM Read - Read header, version = 1, file write count = 189,
time = Sat Apr 20 06:34:09 2013
D/BHD ( 285): NVM Load - Found newest file, index to use = 0
D/BHD ( 285): State - EEPROM id = 898bc7a41c0050b7; capacity = 1750
D/BHD ( 285): State - BMS real fcc batt temp = 282, real fcc = 1700
D/BHD ( 285): State - BMS SOC = 100%, OCV = 3682000, rbatt = 241
D/BHD ( 285): State - BMS charge inc = 66, charge cycles = 121
D/BHD ( 285): State - is factory mode = 0
D/BHD ( 285): State - is charging = 0
D/BHD ( 285): State - aged capacity % = 98
D/BHD ( 285): State - aged capacity calculated @ Fri Apr 5 00:04:14 2013
D/BHD ( 285): State - Begin charge % = 0, cc = 972508, ocv = 4011000
D/BHD ( 285): State - End charge % = 100, cc = -468380, ocv = 4011000
I/cm ( 369): | \_/ |__| |\ | | | | __ |___ |\ | |\/| | | | \
D/BHD ( 285): Created socket 7 for uevents
D/PPDaemon( 334): isHDMIPrimary: HDMI is not primary display
D/PPDaemon( 334): CABL version 1.0.20120512
E/ThermalDaemon( 284): Thermal daemon started
D/QC-time-services( 339): Daemon:genoff_pre_init::Base = 0
D/QC-time-services( 339): Daemon:ats_rtc_init: Time read from RTC -- year = 113
, month = 3,day = 3
D/Vold ( 266): Volume sdcard state changing 0 (No-Media) -> 2 (Pending)
D/DirectVolume( 266): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 97
, PARTN 1
E/QC-time-services( 339): Daemon:genoff_boot_tod_init: Unable to set TOD at boo
t up
E/QC-time-services( 339): Daemon: Unable to set TOD at boot up
D/QC-time-services( 339): Daemon:genoff_modem_qmi_init: Initiallizing QMI
I/cm ( 385): Welcome to Android 4.2.2 / CyanogenMod-
I/Atfwd_Daemon( 333): ATFWD --> QMI Port : rmnet1
I/start ( 400): A wise man never plays leapfrog with a unicorn
W/libc ( 336): WARNING: generic atexit() called from legacy shared library
I/Sensors ( 376): sns_init_la.c(292):initializing sns_memmgr_init
I/Sensors ( 376): sns_init_la.c(303):Waiting for sns_memmgr_init...
I/Sensors ( 376): sns_init_la.c(307):Done waiting for sns_memmgr_init
I/Sensors ( 376): sns_init_la.c(292):initializing sns_debug_test_init1
I/Sensors ( 376): sns_init_la.c(303):Waiting for sns_debug_test_init1...
I/Sensors ( 376): sns_init_la.c(307):Done waiting for sns_debug_test_init1
I/Sensors ( 376): sns_init_la.c(292):initializing sns_pwr_init
I/sensorsqcomwrapper.sh( 374): Use option "-d" to run as background process.
I/sensorsqcomwrapper.sh( 374): Running in foreground...
I/run-parts( 342): sysctl: /etc/sysctl.conf: No such file or directory
I/SurfaceFlinger( 275): SurfaceFlinger is starting
I/SurfaceFlinger( 275): SurfaceFlinger's main thread ready to run. Initializing
graphics H/W...
I/Sensors ( 376): sns_init_la.c(303):Waiting for sns_pwr_init...
I/Sensors ( 376): sns_init_la.c(307):Done waiting for sns_pwr_init
I/Sensors ( 376): sns_init_la.c(292):initializing sns_em_init
I/Sensors ( 376): sns_init_la.c(303):Waiting for sns_em_init...
D/libEGL ( 275): loaded /system/lib/egl/libEGL_adreno200.so
I/Sensors ( 376): sns_init_la.c(307):Done waiting for sns_em_init
I/Sensors ( 376): sns_init_la.c(292):initializing sns_smr_init
I/Sensors ( 376): sns_init_la.c(303):Waiting for sns_smr_init...
W/Sensors ( 376): sns_smr_la.c(415):smr_la: smr_apps_la_thread_main is starting
, fd=15, sns_smr.en_rx_msg_ptr=400c87e8
I/Sensors ( 376): sns_init_la.c(307):Done waiting for sns_smr_init
I/Sensors ( 376): sns_init_la.c(292):initializing sns_reg_init
I/Sensors ( 376): sns_init_la.c(303):Waiting for sns_reg_init...
D/BHD ( 285): Got a battery uevent,log details
D/BHD ( 285): Battery start charging @ 88%!
D/libEGL ( 275): loaded /system/lib/egl/libGLESv1_CM_adreno200.so
D/libEGL ( 275): loaded /system/lib/egl/libGLESv2_adreno200.so
I/Sensors ( 376): sns_init_la.c(307):Done waiting for sns_reg_init
I/Sensors ( 376): sns_init_la.c(292):initializing sns_sam_init
I/Sensors ( 376): sns_init_la.c(303):Waiting for sns_sam_init...
I/Adreno200-EGL( 275): <eglInitialize:269>: EGL 1.4 QUALCOMM build: Nondetermin
istic AU_full_mako_PARTNER-ANDROID/JB-MR1-DEV_CL2946718_release_AU (CL2946718)
I/Adreno200-EGL( 275): Build Date: 11/04/12 Sun
I/Adreno200-EGL( 275): Local Branch:
I/Adreno200-EGL( 275): Remote Branch: m/partner-android/jb-mr1-dev
I/Adreno200-EGL( 275): Local Patches: NONE
I/Adreno200-EGL( 275): Reconstruct Branch: NOTHING
I/gralloc ( 275): using (fd=21)
I/gralloc ( 275): id = msmfb42_90701
I/gralloc ( 275): xres = 720 px
I/gralloc ( 275): yres = 1280 px
I/gralloc ( 275): xres_virtual = 720 px
I/gralloc ( 275): yres_virtual = 3840 px
I/gralloc ( 275): bpp = 32
I/gralloc ( 275): r = 24:8
I/gralloc ( 275): g = 16:8
I/gralloc ( 275): b = 8:8
I/gralloc ( 275): width = 56 mm (326.571442 dpi)
I/gralloc ( 275): height = 99 mm (328.404053 dpi)
I/gralloc ( 275): refresh rate = 60.00 Hz
D/CALCFPS ( 275): DEBUG_CALC_FPS: 0
D/CALCFPS ( 275): period: 10
D/CALCFPS ( 275): ignorethresh_us: 500000
D/CALCFPS ( 275): DEBUG_CALC_FPS: 0
D/CALCFPS ( 275): period: 10
D/CALCFPS ( 275): ignorethresh_us: 500000
D/overlay ( 275): initoverlay:: opening the device:: /dev/graphics/fb0
D/overlay ( 275): initoverlay:: opening the device:: /dev/graphics/fb1
D/overlay ( 275): ndx=6 num=5 z_order=-1
D/AndroidRuntime( 276):
D/AndroidRuntime( 276): >>>>>> AndroidRuntime START com.android.internal.os.Zyg
oteInit <<<<<<
D/AndroidRuntime( 276): CheckJNI is OFF
D/overlay ( 275): initoverlay:: opening the device:: /dev/graphics/fb2
I/mediaserver( 278): ServiceManager: 0x414a7ed8
I/AudioFlinger( 278): Using default 3000 mSec as standby time.
I/CameraService( 278): CameraService started (pid=278)
^C
C:\Users\John\Android\sdk\platform-tools>adb logcat e
--------- beginning of /dev/log/system
I/Vold ( 266): Vold 2.1 (the revenge) firing up
D/Vold ( 266): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media
)
D/Vold ( 266): Volume usbdisk_1.1.1 state changing -1 (Initializing) -> 0 (N
o-Media)
D/Vold ( 266): Volume usbdisk_1.0 state changing -1 (Initializing) -> 0 (No-
Media)
D/Vold ( 266): Volume usbdisk_1.1 state changing -1 (Initializing) -> 0 (No-
Media)
D/Vold ( 266): Volume usbdisk_1.2 state changing -1 (Initializing) -> 0 (No-
Media)
D/Vold ( 266): Volume usbdisk_1.3 state changing -1 (Initializing) -> 0 (No-
Media)
D/Vold ( 266): Volume usbdisk_1.4 state changing -1 (Initializing) -> 0 (No-
Media)
D/Vold ( 266): Volume usbdisk_1.5 state changing -1 (Initializing) -> 0 (No-
Media)
D/Vold ( 266): Volume usbdisk_1.6 state changing -1 (Initializing) -> 0 (No-
Media)
D/Vold ( 266): Volume usbdisk_1.7 state changing -1 (Initializing) -> 0 (No-
Media)
D/Vold ( 266): Volume sdcard state changing 0 (No-Media) -> 2 (Pending)
D/DirectVolume( 266): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 97
, PARTN 1
Can anyone help me?
Really, no one?
Sent from my MB886 using xda app-developers app
Codex01 said:
Really, no one?
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
Some people (like me) don't even know what to do with that so just be patient friend.
Sent from my MB886 using xda app-developers app
worlddominatiin said:
Some people (like me) don't even know what to do with that so just be patient friend.
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
Yeah, I pretty much know whats going on, I may have the wrong lib_runtime and android policy, also may be a faulty kernel. From the log you can tell it finalises boot, it has all the scripts but there are a few errors, that I know cant be errors.
system/lib/libnetcmdiface.so - look like that lib isn't there
camera drivers might be wrong - use the CM10.1 drivers
and looks like some of the /etc scripts aren't working properly and some .conf files aren't present.
I'd have to flash the rom and have a physical copy to mess with to tell you more.
skeevydude said:
system/lib/libnetcmdiface.so - look like that lib isn't there
camera drivers might be wrong - use the CM10.1 drivers
and looks like some of the /etc scripts aren't working properly and some .conf files aren't present.
I'd have to flash the rom and have a physical copy to mess with to tell you more.
Click to expand...
Click to collapse
I will upload this on the new site asap.
Any word on ur progress my friend?
Sent from my MB886 using xda premium
sickkside13 said:
Any word on ur progress my friend?
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
@sickkside13, @skeevydude and I are working on this port, hes helping me alot. He says (I deleted the email, so don't quote me.) that we will have a build from source probably by tomorrow or the day after.
Nice
Sent from my MB886 using xda premium
I still gotta tweak our device\vendor repo (if its anything like PA, which it seems to be, should only be a few lines). Hard part will be making a vendor/rootbox repo for us -- just gonna base it on a Nexus and start playing the follow the makefile game . Due to the way our CM10.1 repo is set up -- our only custom repos are for kernel, device, and device vendor -- the very minimal necessary -- roms like this & PACMAN shouldn't be that hard to make for us from source. Atrix HD and GSM Razr HD anyways...don't know much about CDMA roms.
Depending on time, I should have the necessary changes and additions done today. I gotta go with the bossman on a bid and to pick up some materials today --- not sure how long that'll take. Gotta go 20 miles one way from town for the bid, 40 miles the other way for materials (60 miles from the bid).
Waiting for this, looks good
Sent from my MB886 using xda app-developers app
Just finished everything and starting the first compile. Been going for 10 minutes now. Hopefully it'll finish. :fingers-crossed:
If it goes well, sources should be on github this evening and my tweaked vendor and device repo should just work with the PacMan sources. PacMan should just need some qinara vendor/pacman config and make files. Root and Pac both use a modified PA style build system, I've done a bit of PA in the past so, and luckily, doing these tweaks\making the necessary vendor make files is nothing new to me.
Plan is to do Unofficial Atrix HD RootBox. If this works, then I'll do the same for Razr HD. Once all that's done I'll move on to PacMan.
I'm also going to add, before all you guys start giving me the same BS you've been giving Codex, that all I'm doing is taking the razr-qcom dev team repos and making them compatible with other projects. All the actual development will either be via the dev team's CM10.1 kernel or whatever project's dev team. That's not saying that I won't add in any fixes or whatever myself, just that most of what I'm doing is combining other peoples hard work for our benefit.
//20 minutes compiling and goind strong
skeevydude said:
Plan is to do Unofficial Atrix HD RootBox. If this works, then I'll do the same for Razr HD. Once all that's done I'll move on to PacMan.
Click to expand...
Click to collapse
Thanks for the Razr HD love!
Didn't compile, had some errors with tcpdump, removing it and trying again.
Sources available on git-hub
Code:
repo init -u [url]https://github.com/skeevy420/platform_manifest.git[/url] -b razrqcom-rootbox
repo sync
. build_rootbox.sh qinara [B][COLOR="Blue"]X[/COLOR][/B] clean
[B][COLOR="Blue"]X[/COLOR][/B] is the number of threads to use, use either number of cores or number of cores +1 -- whichever you find works best.
//Why all of a sudden does XDA decide to email me when I post a code box in my own post? You'd think I'd be aware of that one
Once you get a build I'd be more than happy to beta, PM me if you need anything. I was a beta tester for eight months for two devs on the Galaxy Player 5.0 so I have a lot of experience...
Sent from my MB886 using xda app-developers app
EcHoFiiVe said:
Once you get a build I'd be more than happy to beta, PM me if you need anything. I was a beta tester for eight months for two devs on the Galaxy Player 5.0 so I have a lot of experience...
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
Let ya know when I know
Was having some defconfig issues with the kernel. Resolved them and starting over. It was crappin out around 35 minutes, so once 10:00 central hits I'll be farther along in the process anyways
Day one fun
skeevydude said:
Let ya know when I know
Was having some defconfig issues with the kernel. Resolved them and starting over. It was crappin out around 35 minutes, so once 10:00 central hits I'll be farther along in the process anyways
Day one fun
Click to expand...
Click to collapse
How long do you think it'll take to build? Four, seven hours?
Sent from my MB886 using xda app-developers app
EcHoFiiVe said:
How long do you think it'll take to build? Four, seven hours?
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
From start to finish? Defy CM10.1 takes an hour an a half, so this should be between an hour an a half to two hours...providing it finishes.
i have a nexus 4 and i just flashed rootbox its kinda buggy but there is another build. Il try it out in a bit
Sent from my MB886 using xda premium
sickkside13 said:
i have a nexus 4 and i just flashed rootbox its kinda buggy but there is another build. Il try it out in a bit
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
Even if it is buggy I'd at least like to get it set up and compiling so that when its not buggy all the leg work is already done.
Hi,everyone! I got into trouble when I tried to build AOSPA 4+ for mi3 tegra endtion.I successfully complied a *.zip,and successfully flash it to my device,but it always show the boot animation can not get into launcher.I have got logcat,but I am a beginner and have no knowledge about JAVA.
There is a part of locat
Code:
--------- beginning of /dev/log/main
E/nvaudio_modem(25458): Failed to get phone service!
W/AudioFlinger(25458): Thread AudioOut_2 cannot connect to the power manager service
E/AudioFlinger(25458): no wake lock to update!
I/r_submix(25458): adev_open(name=audio_hw_if)
I/r_submix(25458): adev_init_check()
I/AudioFlinger(25458): loadHwModule() Loaded r_submix audio interface from Wifi Display audio HAL (audio) handle 3
I/AudioPolicyService(25458): Loaded audio policy from LEGACY Audio Policy HAL (audio_policy)
E/memtrack(25457): Couldn't load memtrack module (No such file or directory)
E/android.os.Debug(25457): failed to load memtrack module: -2
I/SamplingProfilerIntegration(25457): Profiling disabled.
I/Zygote (25457): Preloading classes...
D/idmap (25596): error: no read access to /vendor/overlay: No such file or directory
D/TextLayoutCache(25457): Using debug level = 0 - Debug Enabled = 0
I/dalvikvm(25457): threadid=1: recursive native library load attempt (/system/lib/libmedia_jni.so)
D/MtpDeviceJNI(25457): register_android_mtp_MtpDevice
I/dalvikvm(25457): threadid=1: recursive native library load attempt (/system/lib/libmedia_jni.so)
I/dalvikvm(25457): threadid=1: recursive native library load attempt (/system/lib/libmedia_jni.so)
I/dalvikvm(25457): threadid=1: recursive native library load attempt (/system/lib/libmedia_jni.so)
E/EmojiFactory_jni(25457): Failed to load libemoji.so: dlopen failed: library "libemoji.so" not found
V/NatController(25456): runCmd(/system/bin/iptables -F natctrl_FORWARD) res=0
V/NatController(25456): runCmd(/system/bin/iptables -A natctrl_FORWARD -j DROP) res=0
V/NatController(25456): runCmd(/system/bin/iptables -t nat -F natctrl_nat_POSTROUTING) res=0
V/NatController(25456): runCmd(/system/bin/ip route flush cache) res=0
V/NatController(25456): runCmd(/system/bin/iptables -F natctrl_tether_counters) res=0
I/LibraryLoader(25457): Loading: webviewchromium
E/dalvikvm(25457): dlopen("/system/lib/libwebviewchromium.so") failed: dlopen failed: empty/missing DT_HASH in "libwebviewchromium.so" (built with --hash-style=gnu?)
W/WebViewFactory(25457): error preloading provider
W/WebViewFactory(25457): java.lang.RuntimeException: Cannot load WebView
W/WebViewFactory(25457): at com.android.org.chromium.android_webview.AwBrowserProcess.loadLibrary(AwBrowserProcess.java:31)
W/WebViewFactory(25457): at com.android.webview.chromium.WebViewChromiumFactoryProvider.<init>(WebViewChromiumFactoryProvider.java:87)
W/WebViewFactory(25457): at java.lang.Class.newInstanceImpl(Native Method)
W/WebViewFactory(25457): at java.lang.Class.newInstance(Class.java:1208)
W/WebViewFactory(25457): at android.webkit.WebViewFactory$Preloader.<clinit>(WebViewFactory.java:43)
W/WebViewFactory(25457): at java.lang.Class.classForName(Native Method)
W/WebViewFactory(25457): at java.lang.Class.forName(Class.java:251)
W/WebViewFactory(25457): at java.lang.Class.forName(Class.java:216)
W/WebViewFactory(25457): at com.android.internal.os.ZygoteInit.preloadClasses(ZygoteInit.java:307)
W/WebViewFactory(25457): at com.android.internal.os.ZygoteInit.preload(ZygoteInit.java:247)
W/WebViewFactory(25457): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:581)
W/WebViewFactory(25457): at dalvik.system.NativeStart.main(Native Method)
W/WebViewFactory(25457): Caused by: com.android.org.chromium.content.common.ProcessInitException
W/WebViewFactory(25457): at com.android.org.chromium.content.app.LibraryLoader.loadAlreadyLocked(LibraryLoader.java:135)
W/WebViewFactory(25457): at com.android.org.chromium.content.app.LibraryLoader.loadNow(LibraryLoader.java:87)
W/WebViewFactory(25457): at com.android.org.chromium.android_webview.AwBrowserProcess.loadLibrary(AwBrowserProcess.java:29)
W/WebViewFactory(25457): ... 11 more
W/WebViewFactory(25457): Caused by: java.lang.UnsatisfiedLinkError: dlopen failed: empty/missing DT_HASH in "libwebviewchromium.so" (built with --hash-style=gnu?)
W/WebViewFactory(25457): at java.lang.Runtime.loadLibrary(Runtime.java:386)
W/WebViewFactory(25457): at java.lang.System.loadLibrary(System.java:526)
W/WebViewFactory(25457): at com.android.org.chromium.content.app.LibraryLoader.loadAlreadyLocked(LibraryLoader.java:123)
W/WebViewFactory(25457): ... 13 more
V/NatController(25456): runCmd(/system/bin/iptables -X natctrl_tether_counters) res=0
V/NatController(25456): runCmd(/system/bin/iptables -N natctrl_tether_counters) res=0
W/Zygote (25457): Class not found for preloading: java.lang.UnsafeByteSequence
I/System (25457): Loaded time zone names for "" in 35ms (32ms in ICU)
E/Netd (25456): Unable to create netlink socket: Protocol not supported
E/Netd (25456): Unable to open quota2 logging socket
D/MDnsDS (25456): MDnsSdListener::Hander starting up
D/MDnsDS (25456): MDnsSdListener starting to monitor
D/MDnsDS (25456): Going to poll with pollCount 1
I/System (25457): Loaded time zone names for "en_US" in 22ms (18ms in ICU)
I/Zygote (25457): ...preloaded 2777 classes in 775ms.
I/dalvikvm(25457): System server process 25738 has been created
I/Zygote (25457): Accepting command socket connections
D/SensorService(25738): nuSensorService starting...
I/Sensors (25738): path open /dev/input/event1
I/Sensors (25738): path open /dev/input/event0
I/Sensors (25738): path open /dev/input/event6
I/Sensors (25738): path open /dev/input/event5
E/Sensors (25738): HAL:could not open trigger name
E/Sensors (25738): HAL:could not open current trigger
I/MPL-storeload(25738): Bytes read = 4340
V/Sensors (25738): HAL:MPL:inv_compass_was_turned_off
I/Sensors (25738): path open /dev/input/event1
I/Sensors (25738): path open /dev/input/event0
I/Sensors (25738): path open /dev/input/event6
I/Sensors (25738): path open /dev/input/event5
I/Sensors (25738): path open /dev/input/event4
I/Sensors (25738): path open /dev/input/event3
I/Sensors (25738): path open /dev/input/event1
I/Sensors (25738): path open /dev/input/event0
I/Sensors (25738): path open /dev/input/event6
I/Sensors (25738): path open /dev/input/event5
I/Sensors (25738): path open /dev/input/event4
I/Sensors (25738): path open /dev/input/event1
I/Sensors (25738): path open /dev/input/event0
I/Sensors (25738): path open /dev/input/event6
I/Sensors (25738): path open /dev/input/event5
I/Sensors (25738): path open /dev/input/event4
I/Sensors (25738): path open /dev/input/event3
I/Sensors (25738): path open /dev/input/event2
I/SensorService(25738): Ambient Light Sensor
I/SensorService(25738): Proximity Sensor
I/SensorService(25738): Barometer Sensor
I/SensorService(25738): Temperature Sensor
I/SensorService(25738): Gyroscope Sensor
I/SensorService(25738): Raw Gyroscope Sensor
I/SensorService(25738): Accelerometer Sensor
I/SensorService(25738): Magnetic Field Sensor
I/SensorService(25738): Orientation Sensor
I/SensorService(25738): Rotation Vector Sensor
I/SensorService(25738): Linear Acceleration Sensor
I/SensorService(25738): Gravity Sensor
D/SensorService(25738): Max socket buffer size 1048576
D/SensorService(25738): nuSensorService thread starting...
E/Sensors (25738): HAL:ERR Full data packet was not read
E/Sensors (25738): HAL:ERR Full data packet was not read
I/installd( 201): new connection
I/powerHAL::common(25738): input device id:0 present with name:tegra-kbc
I/powerHAL::common(25738): input device id:1 present with name:atmel-maxtouch
I/powerHAL::common(25738): input device id:2 present with name:bmp180
I/powerHAL::common(25738): input device id:3 present with name:lightsensor
I/powerHAL::common(25738): input device id:4 present with name:proximity
I/powerHAL::common(25738): input device id:5 present with name:compass
I/powerHAL::common(25738): input device id:6 present with name:fsa8108_sw
D/PackageManager(25738): No files in app dir /vendor/overlay
W/ResourceType(25738): Failure getting entry for 0x7f050000 (t=4 e=0) in package 0 (error -75)
W/Resources(25738): Converting to boolean: TypedValue{t=0x3/d=0x1a9a "false" a=2 r=0x7f120876}
W/ResourceType(25738): Failure getting entry for 0x7f0d01bf (t=12 e=447) in package 0 (error -75)
W/ResourceType(25738): Failure getting entry for 0x7f0d01bf (t=12 e=447) in package 0 (error -75)
W/ResourceType(25738): Failure getting entry for 0x7f130310 (t=18 e=784) in package 0 (error -75)
W/ResourceType(25738): Failure getting entry for 0x7f130310 (t=18 e=784) in package 0 (error -75)
W/ResourceType(25738): Failure getting entry for 0x7f1302f3 (t=18 e=755) in package 0 (error -75)
W/ResourceType(25738): Failure getting entry for 0x7f04000f (t=3 e=15) in package 0 (error -75)
W/ResourceType(25738): Failure getting entry for 0x7f04000f (t=3 e=15) in package 0 (error -75)
D/PackageManager(25738): No files in app dir /vendor/app
V/tspdrv (25738): opened device /dev/tspdrv
V/tspdrv (25738): TSPDRV_MAGIC_NUMBER success
V/tspdrv (25738): TSPDRV_GET_NUM_ACTUATORS success, actuators = 1
V/tspdrv (25738): TSPDRV_SET_DEVICE_PARAMETER success
V/tspdrv (25738): timeout_ms: 0
V/tspdrv (25738): TSPDRV_DISABLE_AMP success
E/ConsumerIrService(25738): Can't open consumer IR HW Module, error: -2
W/libsuspend(25738): Error writing 'on' to /sys/power/state: Invalid argument
I/libsuspend(25738): Selected autosleep
I/powerHAL::common(25738): Enabling input device:1
I/powerHAL::common(25738): Enabling input device:2
I/powerHAL::common(25738): Enabling input device:3
I/powerHAL::common(25738): Enabling input device:4
I/powerHAL::common(25738): Enabling input device:5
I/powerHAL::common(25738): Enabling input device:6
I/powerHAL::pisces(25738): average current for last screen off is 206971
D/SurfaceFlinger( 196): Screen acquired, type=0 flinger=0xc0b450
D/SurfaceFlinger( 196): screen was previously acquired
D/EventHub(25738): No input device configuration file found for device 'atmel-maxtouch'.
D/BluetoothManagerService(25738): Loading stored name and address
D/BluetoothManagerService(25738): Stored bluetooth Name=null,Address=null
W/EventHub(25738): Unable to disable kernel key repeat for /dev/input/event1: Function not implemented
I/EventHub(25738): New device: id=1, fd=135, path='/dev/input/event1', name='atmel-maxtouch', classes=0x15, configuration='', keyLayout='/system/usr/keylayout/atmel-maxtouch.kl', keyCharacterMap='/system/usr/keychars/Generic.kcm', builtinKeyboard=false, usingSuspendBlockIoctl=true, usingClockIoctl=false
D/EventHub(25738): No input device configuration file found for device 'tegra-kbc'.
W/EventHub(25738): Unable to disable kernel key repeat for /dev/input/event0: Function not implemented
I/EventHub(25738): New device: id=2, fd=136, path='/dev/input/event0', name='tegra-kbc', classes=0x1, configuration='', keyLayout='/system/usr/keylayout/tegra-kbc.kl', keyCharacterMap='/system/usr/keychars/Generic.kcm', builtinKeyboard=false, usingSuspendBlockIoctl=true, usingClockIoctl=false
D/EventHub(25738): No input device configuration file found for device 'fsa8108_sw'.
W/EventHub(25738): Unable to disable kernel key repeat for /dev/input/event6: Function not implemented
I/EventHub(25738): New device: id=3, fd=138, path='/dev/input/event6', name='fsa8108_sw', classes=0x81, configuration='', keyLayout='/system/usr/keylayout/fsa8108_sw.kl', keyCharacterMap='/system/usr/keychars/Generic.kcm', builtinKeyboard=false, usingSuspendBlockIoctl=true, usingClockIoctl=false
D/EventHub(25738): No input device configuration file found for device 'compass'.
D/EventHub(25738): No input device configuration file found for device 'proximity'.
D/EventHub(25738): No input device configuration file found for device 'lightsensor'.
D/EventHub(25738): No input device configuration file found for device 'bmp180'.
I/InputReader(25738): Device added: id=-1, name='Virtual', sources=0x00000301
I/InputReader(25738): Device added: id=3, name='fsa8108_sw', sources=0x80000101
I/InputReader(25738): Device added: id=2, name='tegra-kbc', sources=0x00000101
I/InputReader(25738): Touch device 'atmel-maxtouch' could not query the properties of its associated display. The device will be inoperable until the display size becomes available.
I/InputReader(25738): Device added: id=1, name='atmel-maxtouch', sources=0x00001103
I/InputReader(25738): Reconfiguring input devices. changes=0x00000004
I/InputReader(25738): Device reconfigured: id=1, name='atmel-maxtouch', size 1080x1920, orientation 0, mode 1, display id 0
I/PackageManager(25738): No secure containers on sdcard
D/WifiController(25738): isAirplaneModeOn = false, isWifiEnabled = false, isScanningAvailable = false
D/BluetoothTethering(25738): startMonitoring: target: Handler (com.android.server.ConnectivityService$NetworkStateTrackerHandler) {41d2e7e0}
D/BluetoothTethering(25738): startMonitoring: mCsHandler: Handler (com.android.server.ConnectivityService$NetworkStateTrackerHandler) {41d2e7e0}
D/BluetoothManagerService(25738): Message: 20
D/BluetoothManagerService(25738): Added callback: [email protected]:true
D/BluetoothManagerService(25738): Message: 30
D/Tethering(25738): Exception adding default nw to upstreamIfaceTypes: java.lang.NullPointerException
I/VolumePanel(25738): changeOverlayStyle : 1
V/nvaudio_hw(25458): nvaudio_dev_set_voice_volume : vol 0.800000
D/nvaudio_hw(25458): send volume to telephony:0.800000
D/nvaudio_modem(25458): Set modem volume to 0.800000
E/nvaudio_modem(25458): Failed to get phone service!
E/SELinux (25738): SELinux: Loaded file_contexts from /file_contexts
D/Atlas (25738): Computing best atlas configuration...
D/Atlas (25738): Running Atlas Worker #1
D/Atlas (25738): Running Atlas Worker #2
D/Atlas (25738): Running Atlas Worker #3
I/com.android.server.ThemeService(25738): Spawned worker thread
I/WindowManager(25738): SAFE MODE not enabled
V/tspdrv (25738): opened device /dev/tspdrv
V/tspdrv (25738): TSPDRV_MAGIC_NUMBER success
V/tspdrv (25738): TSPDRV_GET_NUM_ACTUATORS success, actuators = 1
F/libc (25738): invalid address or address of corrupt block 0xbed47420 passed to dlfree
F/libc (25738): Fatal signal 11 (SIGSEGV) at 0xdeadbaad (code=1), thread 25738 (system_server)
I forgot to filter the log ,sorry...
And when I am building,it always showed that: The API version is out of date,use Xlint to recomplie(In fact I am a Chinese and the massage is in Chinese,I translate it you to understand it),but the JDK version is 1.6.0.33,it is suitable to build kitkat,right?
I hope you answer,please.