[Q] Captivate stuck in download mode - Captivate Q&A, Help & Troubleshooting

Hi everyone,
I was on stock Gingerbread UCKE3.
I tried installing Speedmod kernel so that I could flash Cyanogenmod 9 using this method, however it didn't work and the phone was softbricked. Which was still alright, because I could still unbrick it every time with One-Click Unbrick.
So I decided to flash back to stock JF6 with Odin one-click, and it was stuck at sbl.bin for an hour. So I unplugged the phone, and it wouldn't power on anymore.
Almost every, if not all, unbricking threads I've read in this forum suggested flashing back to stock ROM using the very same Odin one-click that messed up my phone.
Right now I still can get into download mode, but I'm not sure whether I should flash it back using that Odin one-click.
Any idea? I really don't want to hardbrick my phone.
edit: I understand that the bootloaders are now messed up (primary = Gingerbread, secondary = Eclair). Would it be a good idea to flash back to stock Gingerbread UCKE3 (or even UCKF1)?

U were really really close to being hard bricked. The jf6 boot.bin had already flashed and apparently, thankfully for u, the sbl.bin had finished flashing even though it showed to be stuck there. Whew !!
If ur bootloaders were mix matched... GB / Eclair, u would be hard bricked. If u can still get in download mode then u r not hard bricked.
If it was my phone then i would use Odin or Heimdall Stock GB 2.3.5 i897ucKK4 One Click or the i897ucKK4 Full Firmware (whichever works best for the phone--some models don't like the one clicks) and flash it to Stock GB i897ucKK4 with Bootloaders. And then after that u don't need to flash a stock package with bootloaders again. And if u ever want to go back to Stock again, just go back to Stock KK4 with NO bootloaders.
Be sure u have a reliable micro usb/usb cable, constant power source to ur pc, use a usb port in the back of the pc, not u hub. And take a look at jmtheiss' stickied thread in the General forum ---Captivate Connection Issues and Download Mode Help.
Sent from my SGH-I897 using xda premium

4-2ndtwin said:
U were really really close to being hard bricked. The jf6 boot.bin had already flashed and apparently, thankfully for u, the sbl.bin had finished flashing even though it showed to be stuck there. Whew !!
If ur bootloaders were mix matched... GB / Eclair, u would be hard bricked. If u can still get in download mode then u r not hard bricked.
If it was my phone then i would use Odin or Heimdall Stock GB 2.3.5 i897ucKK4 One Click or the i897ucKK4 Full Firmware (whichever works best for the phone--some models don't like the one clicks) and flash it to Stock GB i897ucKK4 with Bootloaders. And then after that u don't need to flash a stock package with bootloaders again. And if u ever want to go back to Stock again, just go back to Stock KK4 with NO bootloaders.
Be sure u have a reliable micro usb/usb cable, constant power source to ur pc, use a usb port in the back of the pc, not u hub. And take a look at jmtheiss' stickied thread in the General forum ---Captivate Connection Issues and Download Mode Help.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Hi 4-2ndtwin, thanks for replying. I had actually hardbricked my phone before your reply, so I sent it for jtag, and it's now back on Gingerbread UCKE3.
My main concern now is to root it and to upgrade it to Cyanogenmod 9. I can't seem to find any root method that doesn't mention upgrading to UCKF1 first. I had tried zroot and this anyway but they didn't work.
I'd be willing to upgrade to UCKK4 if it means I can root it later, though I'm unsure whether I should install bootloaders or not this time, because I'm coming from UCKE3. After all, mixed up bootloaders were what bricked my phone, and I really can't afford to hardbrick it again.

See TRusselo's Guide that is a stickied thread in this Q & A forum.
There is no need to get Root in order to flash a custom Rom. That guide will help u get to CM9.
Sent from my SGH-I897 using xda premium

Related

SGS Back to life using a jig.. now what?

I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Best option for bell users is darkys rom. For further info check darky's rom info
Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App
repartition yes? .pit universal?
Jason123420 said:
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App
Click to expand...
Click to collapse
So the stock JL2 that I have is a .tar and .dll
I have a 512.pit from a beta 2.2 , are they different?
Did I mention boot problems too? Hanging @ Samsung, no splash ani.
I guess the .pit means yes on repartition?
Thanks
Just use the stock firmware and .pit from samfirmware.com and when Odin is open do not tick off repartirion... just put the .pit in it's spot and the tar in th's PDA part and flash
Sent from my GT-I9000 using XDA App
Now I'm no pro... I just flashed a rom once and got stuck in a boot loop and this is what worked for me
Sent from my GT-I9000 using XDA App
Recovery back but can't mount /dev/block/stl10
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks
Sorry man like I said I'm no pro... ide flash stock jl2 back and send it back to Samsung for repair maybe they will do something for your warranty
Sent from my GT-I9000 using XDA App
Lyon huntington said:
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks
Click to expand...
Click to collapse
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.
It's Alive! - Can't mount /dev/block/stl10 fixed.
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!
tsinc said:
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.
Click to expand...
Click to collapse
Yes, do this. For repartition to work the .tar has to have dbdata.rfs, otherwise it won't work.
Then flash a speedmod kernel with odin for root/cwm and flash you're favourite custom rom
unlock&root owngrade or speedmod kernel? suggestions?
Forgot to mention that all this started after I got the phone back from Bell service after SD card failure.
I know mod methods changed with the latest firmware, as I had used the update.zip method that is now unavailable.
My phone went in unlocked and rooted
the phone came back re-locked (old code doesn't work? wtf?),
and it was unrooted w/3e recovery
Can the phone unlock code change?
Will downgrading to 2.1 make unlocking easier?
or is unlocking just as simple after a speedmod kernel with odin for root/cwm
Which is better?
downgrade the firmware to 2.1 and root using the old update.zip method or speedmod kernel?
Which kernel? (link please )
cheers
Lyon huntington said:
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!
Click to expand...
Click to collapse
All you did was flash UGJL2 with no repartition and it brought your phone back?
Kops said:
All you did was flash UGJL2 with no repartition and it brought your phone back?
Click to expand...
Click to collapse
You know what....I've been trying various combinations of CSC/MODEM/PIT and everything to get this phone running again.
All I did was select a FULL UGJL2, and thats IT. NO pit, NO repartition, and it worked
The best way to revive your I9000m is to first flash JPC (a three file ROM) with 512 PIT and repartition ticked. The phone will still be in a boot loop. Then flash the JL2 PDA without repartition or PIT. The best way to go back to stock! Has always worked for me. I9000m's are not the same as other I9000's and do not flash repartition and the PDA in the same flash! Good luck!

[Q] When odin one click doesnt work...

so my dilemma is as follows.. i was running continuum 4.1 on my captivate. i decided i wanted to try one of the new gingerbread roms, so my first step was to use odinoneclick 1.0 to get to complete stock and go from there. my luck, odin froze on me at sbl.bin... so i am soft bricked but i can use the vol up/down plug usb method to get to download mode. because i have only used one click before, and not a full odin like 1.7, i am having trouble figuring out exactly what i need, and what steps are necessary to safely get me back to stock using odin 1.7 so i can then load GB bootloaders and stop messing with BL's from now on.. so i suppose my main question is should i first flash eclair before trying to flash GB bootloaders/rom? my other question being, if so, what files do i need, and do i need to place a pit file and repartition? sorry if this is a noob question, i just dont want to screw it up any further and wasnt sure if specific steps must be taken when you are soft bricked.. thanks very much in advance!
No need to flash Eclair. Just flash the KF1 file in this post and then XCal's reorient for GB and you'll be good to go. Just don't boot into the OS after flashing XCal's kernel else you'll get bootloops since it was designed for I9000 based ROMs rather then I897. Just reboot back into recovery after flashign XCal's Kernel and then flash whatever GB ROM you want.
http://forum.xda-developers.com/showthread.php?t=1126704
I personally prefer to flash my phone using Heimdall on my laptop running Kubuntu as it's generally more stable/successful, and it's easier to choose which files you want to flash if you only want to flash specific files (Like the bootloaders).
Also KH3 is out and it looks like it might have updated bootloaders, but it's not a full ROM from what I was able to grab. It's missing the param.lfs, dbdata.rfs, and the pit file. Also has an added SS_DL.dll which I'm not sure what the purpose of that file is since it's a Windows file...
http://forum.xda-developers.com/showthread.php?t=1232703
Moved to Q&A.....
NO QUESTIONS IN DEVELOPMENT PLEASE!!!!!
conantroutman said:
Moved to Q&A.....
NO QUESTIONS IN DEVELOPMENT PLEASE!!!!!
Click to expand...
Click to collapse
my apologies! my intention was to post in q&a but i was at work sneaking on the pc i must have been clicking too fast..
and kyuta... thank you for the suggestion! so is it safe to just use the whole odin package in the link you provided just to get a clean install, and then move on to a rom/kernel of choice at a later time?
im getting a big red FAIL on every attempt at flashing KF1 file with odin 1.3 and 1.7 im not sure which route to take at this point. do i need to flash the pit file with the bootloaders?
dartdc97 said:
im getting a big red FAIL on every attempt at flashing KF1 file with odin 1.3 and 1.7 im not sure which route to take at this point. do i need to flash the pit file with the bootloaders?
Click to expand...
Click to collapse
just make sure u hav right file downloaded...and right click on odin and click run as administrator...try changing the usb ports....and try changing the usb cable...and see if u hav proper driver installed ....
check all these which i hav mentioned...
then u shd be able to go back to either eclair(jf6) or gingerbread(kf1) stock
killer_raj said:
just make sure u hav right file downloaded...and right click on odin and click run as administrator...try changing the usb ports....and try changing the usb cable...and see if u hav proper driver installed ....
check all these which i hav mentioned...
then u shd be able to go back to either eclair(jf6) or gingerbread(kf1) stock
Click to expand...
Click to collapse
Just to add this this: Try using XP service pack 2 mode if you are using Windows 7 x 64.

GB bootloaders with root

What Odin/One click package should i download to get root with GB bootloaders with CWM and flash zip file roms only? So i can flash roms like Fasty III and others? Which one is suggested for great battery life? Experts please
First off you don't need root to flash a rom. as for bootloaders use either a leak 2.3.5 i897 rom with bootloader or just the bootloader package. They are stickied in Dev section.
Can you please send me a link im new at all this but im learning i have Odin 3 v 1.81 and Odin v 1.81 ATT GB bootloaders extracted. I just want to be able to use download mode jig and plug in USB and go.
I have UCK H3 one click is that good enough to get started? Could i flash a rom in rom manager like fasty III im looking for fast and grt battery life.
KH3 1 click should be good. Don't use Rom Manager. Here you can find everything you will need. Just flash KH3 or any other GB leak, let it boot up normally, flash (with ODIN or SGS kernel flasher(app)) the boog's kernel that has CWM, let it boot up normally. Boot up in recovery and flash the rom.
Yea ive seen this which one should i pick and with or w/o bootloaders. 2.3 or 2.4.5 not sure? Just want the best one for speed and battery life and i like launcher pro.
I don't use launcher pro so can't say. But IMO KH3 or KJ3 would be my best (I still use KH3 modem). You need bootloaders so you can flash one with bootloaders.
prbassplayer said:
KH3 1 click should be good. Don't use Rom Manager. Here you can find everything you will need. Just flash KH3 or any other GB leak, let it boot up normally, flash (with ODIN or SGS kernel flasher(app)) the boog's kernel that has CWM, let it boot up normally. Boot up in recovery and flash the rom.
Click to expand...
Click to collapse
SGS kernel flasher requires root. Which rooting involves a kernel swap with Odin anyway, so for this purpose its pretty useless.
I just flashed UCK H3 and while in process i checked flash bootloaders now im soft bricked. Will the download mode jig help? I have one i dont know what to do. It doesnt work. What can i do am i screwed? I have the soft brick symbols on my phone now.
Reboot pc, swap usb Ports (make sure its one on the back of the PC), right click Odin and ruin as admin, put .tar in pda slot, Pull battery, replace, use jig, ignore screen that appears, connect to PC if Odin recognizes it hit start.
Grt thanks ok i got the fish now what do i reboot or what and add kernel next? I still have Odin opened and USB plugged in
Disconnect, close Odin. Pull battery, replace, use jig, flash boog's kernel the same edu you flashed the fugu kernel.
Im getting a screen that looks like a TV screen all lines what the heck is that? Its boots to ATT logo then TV screen all colors and lines. I did the kernel it passed but not sure whats going on now. It keeps rebooting ATT screen and TV looking screen
... That sounds like you didn't flash correct bootloaders. Correct me if Im wrong. On a side note ya Studa I had a brain fart on SGS kernel flasher.
I can still get in download mod with jig. Cant i try a diffrent package in Odin?
Did you use KH3 with bootloaders?
Not sure what to do im trying the AIO toolbar and im enabled for root phone but seems like nothing is happeneing im still in download mode
that is froyo boots on a gingerbread ROM.
op flash this package
That will flash the gingerbread bootloaders which will get rid of those lines and make it possible to boot into recovery.
DO NOT USE AIO TOOLBOX AFTER THIS PACKAGE IT WILL BRICK YOUR PHONE. might as well just delete that for safe measure.
Ok i was in recovery in rebooted phone now im at ATT screen logo no lines now. What do i do now is there a rom to flash or am i even rooted? Can i go into download mode and flash a kernel
Im staying at recovery till i hear back from someone lol. Where do i go from here?

Stock Capitivate now what do I do.

I used to have a Samsung Fascinate, but we just left Verizon for Straight Talk. 2 years ago AT&T gave me a refurbed Captivate that we left in the box until now. It has Eclair but I am wanting to possibly upgrade it to Stock Gingerbread or a nice stable Rom. So if someone could give me some pointers (sounds vague) that would be great.:good:
Check out the Stickied Threads in the Q & A, General, and Development Forums. There is a lot of up to date info that will be very helpful.
And from now on, plz post questions in the q & a...and a search before posting will prove to get the answers u need, especially on the basics... Thx
(request sent to mod to move to q & a)
4-2ndtwin said:
Check out the Stickied Threads in the Q & A, General, and Development Forums. There is a lot of up to date info that will be very helpful.
And from now on, plz post questions in the q & a...and a search before posting will prove to get the answers u need, especially on the basics... Thx
(request sent to mod to move to q & a)
Click to expand...
Click to collapse
Sorry about that, It has been awhile since I posted here.
chunklefunk said:
I used to have a Samsung Fascinate, but we just left Verizon for Straight Talk. 2 years ago AT&T gave me a refurbed Captivate that we left in the box until now. It has Eclair but I am wanting to possibly upgrade it to Stock Gingerbread or a nice stable Rom. So if someone could give me some pointers (sounds vague) that would be great.:good:
Click to expand...
Click to collapse
Check out my thread titled JellyUI in the Captivate Dev section. Instructions on how to flash the rom are in the first post. Enjoy
I actually think this is not a bad place for the post although Q&A would be better. I recently tried to bring my old cappy from stock to ICS. I had gingerbread but when I tried to flash CM9, I must have had an old CWM that was not compatible and got into a bootloop where the only way out was to odin back to stock. Then I had a nearly impossible time finding all the files that would allow me to get to ICS. Designgear's and a number of other files referenced throughout the dev section for upgrading have bad links now. I am on an i9000 bootloader with 2 button recovery (since the easiest way to get back to GB was to flash S7v3 with Odin since all the referenced files are still there) but cannot figure out an easy way to get a 3 button CWM even after spending a few days looking for a way to do it just using Odin and CWM as I did in the past. After a lot of trial and error and even getting to a point where I could not get into download mode anymore, I did get CM9 flashed eventually but I will not try again until I figure out how to at least get a 3 button CWM. I went almost two years as a cappy flashaholic and never once had to use ADB or Heimdall, so would prefer not to if possible.
If someone could provide a list of valid links to all the files that are necessary to go from stock to being able to flash ICS or JB roms, I will archive the files so they won't be lost.
^
See TRusselo's How to Guide on Flashing . It is a Stickied thread in this Q & A Forum.
And if u will flash the i897 GB Bootloaders, that will allow u to do the 3 button to recovery.
Sent from my SAMSUNG-SGH-I897 using xda premium
4-2ndtwin said:
^
See TRusselo's How to Guide on Flashing . It is a Stickied thread in this Q & A Forum.
And if u will flash the i897 GB Bootloaders, that will allow u to do the 3 button to recovery.
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
I tried the 1st part but my phone automatically booted into recovery mode after the 1st Odin Flash.
If that was after u flashed the GB Bootloaders, that is ok. Just pull battery, replace it, get back into download mode and then Odin flash the Speedmod kernel so u can get the CWM Recovery. Then u can flash ur Rom of choice from there.
Sent from my SGH-I897 using xda premium
4-2ndtwin said:
If that was after u flashed the GB Bootloaders, that is ok. Just pull battery, replace it, get back into download mode and then Odin flash the Speedmod kernel so u can get the CWM Recovery. Then u can flash ur Rom of choice from there.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
So does the speedmod kernal have CWM Recovery on it? I don't need to add that?
Also do I need to do a wipe?
That is all that u r Odin flashing the Speedmod kernel for...just to get to the CWM Recovery.
Just like the Guide states---after u Odin flash the kernel use the Button combo to reboot into Recovery. That kernel is not there to boot ur phone up, only there for u to use cwm.
And usually the Rom u flash will do a full wipe. But u can do it in the recovery if u want before u flash ur rom.
.
Sent from my SGH-I897 using xda premium
4-2ndtwin said:
That is all that u r Odin flashing the Speedmod kernel for...just to get to the CWM Recovery.
Just like the Guide states---after u Odin flash the kernel use the Button combo to reboot into Recovery. That kernel is not there to boot ur phone up, only there for u to use cwm.
And usually the Rom u flash will do a full wipe. But u can do it in the recovery if u want before u flash ur rom.
.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Cool thanks! I was thinking of doing a the latest Cyanogen 7.2 Rom or the Cyanogen 9.1 Rom. They are both on my Cappy.

[Q] Captivate Glitch!?

Ok so using Odin oneclick to unbrick my semibrick samsung captivate its all set and good, but then i root it. Thats successful as well, but then i try to use odin 3.07 to install the GB Kernel after installing the rooted MUGU into it and when my phone boots it INSTANTLY glitches and i have to go back to Odin oneclick to bring it back to 2.1 which i believe is Eclair.
Any help would be appreciative and thank you
I believe ur problem is that u r trying to flash a GB kernel on Eclair firmware. So...
Update to Android 2.3.5 Gingerbread here...Stock GB i897ucKK4
You will need to use a one click with the GB Bootloaders. Heed all warnings about flashing BLs. U do not want to break the connection during the few seconds that the bootloaders are being flashed, i.e. power, usb/micro usb cable. And once u have flashed the Stock GB KK4 one click with bootloaders, there is no need for u to flash back to stock eclair with its bootloaders. If u ever need to flash back to a Stock firmware to fix something or whatever, just use one of the KK4 one clicks without the bootloaders included.
Get Root and/or KK4 Corn Kernel that has CWM Recovery included so that u can move on to flashing Dev Roms here...[Utility] KK4 Easy Root. See post 4 in this thread for a working download link.
Read carefully. Read some more. Understand what ur doing and the risks involved. Proceed. Enjoy. Be sure to at least hit the Dev's thanks buttons because they have worked hard and spent a lot of time doing what they do.
Ok so if i remember correctly(i am not on my comouter right now) odin 3.07 has a BL slot and the PDA slot. If i input the GB BL into the BL slot and the KK4 into the kernel slot would i be able to run them under the same odin setup or would i have to run the BL restart my phone into download mode and THEN run it again? Sorry im a huge noob when it comes to flashing, i onlt found out about it from my stepdad who put Darkstar on his Note
Sent from my SAMSUNG-SGH-I897 using xda app-developers app
The Odin or Heimdall One Clicks that I linked above will do it all for u. There are instructions included in those downloads.
Sent from my SGH-I777 using xda premium
Thank you very much
Sent from my SAMSUNG-SGH-I897 using xda app-developers app

Categories

Resources