[Q] Help plz!! - Galaxy Tab Q&A, Help & Troubleshooting

A friend tried messin around with his tab when he doesnt even know how to jailbreak an iphone 3g... The tab wouldnt even boot past the Samsung Galaxy Tab screen, but it was able to get to download mode... I used a guide to update it to gingerbread using odin, and everything went well! I opened odin, selected PIT and chose the P1_add_hidden.pit file, then i selected PDA and chose the P1000NVFJP6_P1000NUBJP3_P1000NUUBJPB_HOME.tar.md5 file, and i made sure i checked Re-Partition, Auto Reboot, F. Reset Time, Phone EFS Clear and Phone Bootloader Update.. everything went well, but on recovery it was unable to update the systemfile.. but everything else on recovery updated and installed fine! as it reboots, it gets stuck in the bootanimation in the part it says Samsung glowing.. did i do something wrong? how can i fix this? I am still able to get to recovery and download mode fine..

Use overcome method like described here
http://forum.xda-developers.com/showthread.php?t=1855591
Btw, you should not have checked Clear Efs.
The replace bootloader too.
And best to use Odin 1.7 included in the gb stock safe in that link I give you.
Sent from my GT-P1000 using xda app-developers app

priyana said:
Use overcome method like described here
http://forum.xda-developers.com/showthread.php?t=1855591
Btw, you should not have checked Clear Efs.
The replace bootloader too.
And best to use Odin 1.7 included in the gb stock safe in that link I give you.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
thanks! will check this out now!

Why do some people think its rational to use absolutely ridiculous titles like "hlp plz" etc etc??
Please use common sense and use descriptive titles, ie a short title that describes your topic for people browsing the forum. "help plz" does not describe your topic in absolutely any way other then somebody using a completely generic title.

priyana said:
Use overcome method like described here
http://forum.xda-developers.com/showthread.php?t=1855591
Btw, you should not have checked Clear Efs.
The replace bootloader too.
And best to use Odin 1.7 included in the gb stock safe in that link I give you.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
hey! i just wanted to thank you, i did it all and the tab finally booted and is working perfectly!! i forgot to reply about it cause i was so busy with college... but yeah thanks again bro u saved my rep and my friend's tab xD

You a describing your friend to be a noob. Why are you yourself a developer? And do you even know the hard work required to develop a jailbreak for the first time? So don't talk about others' ignorance.
Sent from my GT-P1000 using XDA Premium HD app

In the mood for spamming threads eh, Gogol?
Sent from my GT-P1000 using xda app-developers app

gogol1996 said:
You a describing your friend to be a noob. Why are you yourself a developer? And do you even know the hard work required to develop a jailbreak for the first time? So don't talk about others' ignorance.
Sent from my GT-P1000 using XDA Premium HD app
Click to expand...
Click to collapse
Got a personal or emotional problem bro? Dnt care about it, he did something stupid instead of letting me root it for him and I just described wt he did, no need to get all *****y... Plus I already fixed it, so fk off mod plz close thread
V1P3R-X

Related

[Q] galaxy s stuck on "Galaxy S" screen

hey,
i have an issue, i fear i may have bricked my phone, thou i cant be sure!
It gets stuck on the galaxy s screen when you first turn it on, thou i can still hear the start up sounds.
any ideas on how i can fix it, though i have tried the factory reset, no luck!
i tryed to use Odin, though i dont know how to use it very well!
cheers,
madkid21
Mind at least telling us what the heck you did before this happened?
It would REALLY help us in diagonising your problem, you know.
heh i suppose it would wouldnt it!
I installed the battery icon mod..
Madkid21
How did you try odin? I think that should have done the job.
Sent from my GT-I9000 using XDA App
well i looked at it and thought wtf, how i use this **** lol,
any chance you can explain how to use it, i got it recognise the phone but thats it!
i put phone into download mode, could you explain how i can fix with it?
thanks,
madkid21
Have you downloaded an official ROM?
Sent from my GT-I9000 using XDA App
not yet, im not sure where to get it from! lol
i only had the phone like a month or 2, and i broke it but got it replaced under the warrenty lol
so where can i get a offical rom from?
There are lot of ROMs on samfirmware.com and guides on how to flash them. You need an account though.
Have you even flashed a ROM before?
Sent from my GT-I9000 using XDA App
i have flashed rom on a HTC Hero before, which was my old phone, but not on this phone, dunno how different its gonna be!
madkid21
Check samfirmware.com, it will help you (a lot).
Sent from my GT-I9000 using XDA App
thanks muchly, i will check back soon when i have attempted to flash it!
madkid21
BTW, you could also check Doc's ROM if you want to use custom rom. I personally use it and its great. It has also some good guides compiled on the first post. I strongly suggest you read the Doc-Froyo.pdf guide in that thread.
Good luck!
Sent from my GT-I9000 using XDA App
awesome i sorted it!!
thanks for your help mate,
*at least i think i sorted it*
Odd everything is foceclosing on me now, even the main android os!
Madkid21
No problem I assume you have your device working now.
Sent from my GT-I9000 using XDA App

Answers

In this thread I will try try to answer all of your questions that are retaining to the Samsung Captivate!
Ask away!
Sent from my SAMSUNG-SGH-I897 using xda premium
I just installed DLEV 5 and it doesn't have asian font support. Can't change the system locale to the korean. I was wondering how I could solve this problem
Languages have to be in the ROM or built to add to the ROM in a CWM flashable ZIP. I can't make that, sorry. ..
Sent from my SAMSUNG-SGH-I897 using xda premium
what steps do I have to take to go back to a froyo rom if i'm on a gingerbread ROM with at&t bootloaders
Well flash to stock using Odin one click
Sent from my SAMSUNG-SGH-I897 using xda premium
Which odin
erraz said:
Which odin
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=731989
if you have a later build phone that came with froyo on it, odin one click may cause a bootloop. if that happens:
1.calm down
2. at the bottom of the op of the thread i linked there are links to other firmware packages usewd in the pda slot of full odin. get back into download mode and flash one of those.
Or you can just flash a froyo kernel with odin and then flash the froyo rom in recobery and keep the gb boots as they are backward compatible.
I just got my captivate. Before this all I have had is HTC Androids. It was already rooted and I put cm7 on it but I want to try other roms and I can't flash any other ROM. It just stays on cm7. How can I flash another ROM on here? I think I have the Froyo boot loader on it. I hope I don't have to use Odin because I only have a Mac and haven't been able to find Odin for Mac
Sent from my SGH-I897 using xda premium
bfinch said:
I just got my captivate. Before this all I have had is HTC Androids. It was already rooted and I put cm7 on it but I want to try other roms and I can't flash any other ROM. It just stays on cm7. How can I flash another ROM on here? I think I have the Froyo boot loader on it. I hope I don't have to use Odin because I only have a Mac and haven't been able to find Odin for Mac
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Have to use odin. Or Heimdall, idk if that works on MAC
Sent from my SAMSUNG-SGH-I897 using xda premium
studacris said:
http://forum.xda-developers.com/showthread.php?t=731989
Click to expand...
Click to collapse
Thanks I was gone for a while and didn't see that.
Sent from my SAMSUNG-SGH-I897 using xda premium
b-eock said:
Have to use odin. Or Heimdall, idk if that works on MAC
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
i think heimdall is cross platform, linux, windows, and mac
Yes it is! Should work!
Sent from my SAMSUNG-SGH-I897 using xda premium
b-eock said:
Have to use odin. Or Heimdall, idk if that works on MAC
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
Heimdall works on MAC. Odin doesnt.
if you are going to be supplying answers to noob questions, please try and answer with actual knowledge rather than 'maybes'. your reply that someone needed to use ODIN one click could lead them to a bootloop, but you didnt think about that, did you? then you would be to blame for it when he comes crying back on the forum when hes freaking out about his phone not working after following your advice.
not trying to be rude, because i know you mean well, but you need to fully understand the captivate before you can open a thread like this.
Thanks for the quick answers. looks like I've got a project for today.
Sent from my SGH-I897 using xda premium
Pirateghost said:
Heimdall works on MAC. Odin doesnt.
if you are going to be supplying answers to noob questions, please try and answer with actual knowledge rather than 'maybes'. your reply that someone needed to use ODIN one click could lead them to a bootloop, but you didnt think about that, did you? then you would be to blame for it when he comes crying back on the forum when hes freaking out about his phone not working after following your advice.
not trying to be rude, because i know you mean well, but you need to fully understand the captivate before you can open a thread like this.
Click to expand...
Click to collapse
Hey dude I know what I'm talking about cuz he didn't mention that He had Mac not windows. Also if he did flash with odin it would only soft brick which is Totally recoverable, only hard brick would be flashing the 3 button fix, that would hard brick him.
Sent from my SAMSUNG-SGH-I897 using xda premium
I did mention that I only have a Mac
Sent from my SGH-I897 using xda premium
bfinch said:
I did mention that I only have a Mac
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Sorry wrong person my b
Sent from my SAMSUNG-SGH-I897 using xda premium
b-eock said:
Hey dude I know what I'm talking about cuz he didn't mention that He had Mac not windows. Also if he did flash with odin it would only soft brick which is Totally recoverable, only hard brick would be flashing the 3 button fix, that would hard brick him.
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
Soft bricks are recoverable, but what if he has the bad luck and his key combos dont work for what ever reason (it happend to me once) You just made that noob freak out and spend unnecessary time to make/ buy a jig when it could have been avoided. Don't get me wrong Im one that believes everyone should have atleast a jig.
And show a little more respect Pirateghost is a dev with 3,000+ post I think he knows more then us... Just saying.
I was about to say that i'm not
a noob. But I guess I am to Samsung. Lol.
I do know that if I mess my phone up its my fault. Trust me, I won't come back pissed at anyone.
But thanks again for the help!
Sent from my SGH-I897 using xda premium
Din't mean anything against you.

Need help on my GT-P1000

my tab p1000 GSM, soft bricked
followed the instruction on how to unbrick it, then it booted and got stuck on SAMSUNG logo, any piece of advice?
i downloaded the open asia XJPE from sammobile firmware page.. im from Philippines sir.
@edit:
when i tried wiping data/factory reset
it says:
formatting/data
formatting/dbdata
E:format_volume: rfs format failed on /dev/block/stl10
can someone give me enlightenment?
tnx in advance.
can you boot to download mode (vol down and power button)
I recommend just "restock" using Overcome method
Go to overcome site
Http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Stop there and you will have Gingerbread JQ1
You can continue with the rest, and you will get Overcome 4.1 and you won't regret.
From there you can then try AOKP or CM9, all requires you to have Overcome Kernel with its CWM recovery to flash.
priyana said:
can you boot to download mode (vol down and power button)
I recommend just "restock" using Overcome method
Go to overcome site
Http://www.teamovercome.net
Read the guide,
Missing pictures can be seen here.
http://forum.xda-developers.com/showthread.php?p=20974872
Follow the picture step by step.
Basically to restock:
Download GB-stock-safe-v5.zip, unzip it and and flash with ODIN according to the guide.
Stop there and you will have Gingerbread JQ1
You can continue with the rest, and you will get Overcome 4.1 and you won't regret.
From there you can then try AOKP or CM9, all requires you to have Overcome Kernel with its CWM recovery to flash.
Click to expand...
Click to collapse
yes sir i can boot to download and recovery mode.. i only got stuck on samsung logo.. thank button pressed! i will try it sir. :good:
AWESOME!
^ just finished.. and it did save my wifes SGT7! cool!
xylu said:
^ just finished.. and it did save my wifes SGT7! cool!
Click to expand...
Click to collapse
well done, by the way i'm wonder how is the gt-p1000 running cm9 with 1,4gig over clock? can you post something "i dont have" that shows the main different?
thanks
Declan79 said:
well done, by the way i'm wonder how is the gt-p1000 running cm9 with 1,4gig over clock? can you post something "i dont have" that shows the main different?
thanks
Click to expand...
Click to collapse
Install no frills cpu or antutu cpu master from market
Sent from my GT-P1000 using xda app-developers app
xylu said:
Install no frills cpu or antutu cpu master from market
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
I mean what was the main different between reguler and over clock one
GT-P1000|CM9(rc1)-4.0 with premium xda
Help me
Help me.I have galaxy tab SC-01C.I installed gt p1000s android 2.3 version then ics rc1 then gt p1000s android2.3 version again.Then when i charge my tablet shows like i connected my tablet via usb to computer.And it charges slow,in battery icon it shoes x mark.What should i do? SORRY FOR MY BAD ENGLISH. SOMEONE HELP ME!!!
Declan79 said:
I mean what was the main different between reguler and over clock one
GT-P1000|CM9(rc1)-4.0 with premium xda
Click to expand...
Click to collapse
Overlocked means more speed,
Sent from my GT-P1000 using xda app-developers app
Not sure what state is this
hi, i dont know what to call this. i am totally new to all this...
the goal was to install ICS on the GT-P1000. so i googled and was following instructions...
- did root using doomlord v4
- next was to run 'overocom_7_series_v4.1.-_no wipe' from Recovery mode
- recovery was android e3 so one website recommended to change to CWM.
- using Odin3-v1.85 tried to run skin1980-P101-NEW-CF_root-GB
- it didnt work so just checked -re-partion option
- learned my lesson that i shouldnt do that...and the tab is gone in a comma
so now i am not sure where i am....just tried something called soft oneclick unbrick...it didnt work...
please help....
well, did you read the whole thread on how the OP saved the P1000 ?
First, can you still go to download mode...
if so, then read my reply to OP
xylu said:
^ just finished.. and it did save my wifes SGT7! cool!
Click to expand...
Click to collapse
U mean wife's or wives'? lol jk don't get angry with me I know you're the good guy
Sent from my HTC Desire using xda app-developers app
I seriously need help
I first upgraded my samsung galaxy gt - p1000 from stock 2.3.3 to CM 10 4.1.1 jelly bean, then the mobile network did not work so I return it back to 2.3.3 then I brick it, after unbricking when I boot it to recovery mode it is reporting E: .... path unknown.. it looks that my gt-p1000 is done, i seriously need help to recover it.. pls help !!!!
Silly you.
Cm10 no mobile network, just our modem.bin in /system/vendor/
And you will be OK.
Now to recover just follow my reply to op.
Or follow this new links to overcome method , same as above but all in one place
http://forum.xda-developers.com/showthread.php?t=1881981
Sent from my GT-P1000 using xda app-developers app
Also, when you over clock your device, it gets heated up and battery drains faster
Sent from my GT-N8000 using XDA Premium HD app
Overcome is Awesome
Soft bricked my P1000, then tried all kinds of methods to unbrick, Heimdall worked, but the tab was stuck at the Samsung logo.
Installed Overcome using Odin and nows it back to new! Thanks!

Rom manager

I heard from a thread that using rom manager bricks this phone if you have a partitition and I'd bought the premium version before partitioning my sd card, just want to ask, is this true?
Sent from my GT-S5830 using xda app-developers app
Why would u use that - http://forum.xda-developers.com/showthread.php?t=1942957 !!!
Go on CWM, its healthier for our Ace!
It has nothing to do with having a partition or not.
It bricks the phone anyways. Better remove that app, its dangerous if you don't know what functions of it can be used safely.
Oh, so the whole thing bricks it? Why is that, also I am using cwm anyways
Sent from my GT-S5830 using xda app-developers app
Elite Choob said:
Oh, so the whole thing bricks it? Why is that, also I am using cwm anyways
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
Some parts of the hardware are destroyed if you use it.
nikwen said:
Some parts of the hardware are destroyed if you use it.
Click to expand...
Click to collapse
Mostly the motherboard i think, people reported that they had to get new a motherboard installed in order to unbrick it.
Hmm, that's confused me, I thought it would have broke it system wise. I know how to flash, root, etc, but I'm not exactly sure how they all work, but I thought that flashing just overwrit the system+os. So two questions, when you root/flash does that interact with the hardware in anyway and how?
Sent from my GT-S5830 using xda app-developers app
Elite Choob said:
Hmm, that's confused me, I thought it would have broke it system wise. I know how to flash, root, etc, but I'm not exactly sure how they all work, but I thought that flashing just overwrit the system+os. So two questions, when you root/flash does that interact with the hardware in anyway and how?
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
Try flashing CWM from rom manager and you will see if and how it interacts
P.S Its a joke, don't actually try that.
ayush29k said:
Try flashing CWM from rom manager and you will see if and how it interacts
P.S Its a joke, don't actually try that.
Click to expand...
Click to collapse
Lol, I could tell, but in all seriousness I think I need to do some research
rom manager completely kills ur phone
.this has been proved by multiple users
use cwm from xda galaxy ace forums
Sent from my S500 using xda app-developers app
SpaceCaker said:
rom manager completely kills ur phone
.this has been proved by multiple users
use cwm from xda galaxy ace forums
Sent from my S500 using xda app-developers app
Click to expand...
Click to collapse
Rom manager ... flashes new recovery ... with wrong mounting points ... making your phone useless it will be like having the light switch of your kitchen in your bed room and your bed room light switch on your attic ... know what i mean? Nothing will work !! Since the phone will change the mp to points that dont exist on your phone.
Just flash cwm from stock recovery or from odin and you'll be ok
Sent from my GT-I9300 using XDA Premium HD app
SnowPluralism said:
Rom manager ... flashes new recovery ... with wrong mounting points ... making your phone useless it will be like having the light switch of your kitchen in your bed room and your bed room light switch on your attic ... know what i mean? Nothing will work !! Since the phone will change the mp to points that dont exist on your phone.
Just flash cwm from stock recovery or from odin and you'll be ok
Sent from my GT-I9300 using XDA Premium HD app
Click to expand...
Click to collapse
Hi SnowPluralism,
can u tell me how can i use odin to put my phone back "online". I have gt s5830 and i didn't know about that problem with rom manager and i end up using it, and my phone doesn't want to start properly
thanks in advance.
xfire18 said:
Hi SnowPluralism,
can u tell me how can i use odin to put my phone back "online". I have gt s5830 and i didn't know about that problem with rom manager and i end up using it, and my phone doesn't want to start properly
thanks in advance.
Click to expand...
Click to collapse
Now your phone is oficially dead.
There is nothing u can do. Take it to service center and play stupid like "i was playing or updating my phone and he dyed" dont speak of root cwm xda. And they'll fix u 4 free
Sent from my GT-I9300 using XDA Premium HD app

GT P1000 Bootlooping

Hi there,
I have a GT-P1000 and yet, one again, i have a problem. The Tablet continue restarting after trying to flash P1000XXJU2_P1000OXAJU2_ITV.zip.
I've flashed the dbdata.zip because, first of this it was only rebooting. After flashing it get's a BOOT LOOP on the Samsung Logo.
Since i find only broken links in this section, i would like to know if anyone of you COULD HELP ME.
Telling me to go search won't help me because, i only find broken links...
Follow my signature. Use overcome method.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Follow my signature. Use overcome method.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Yes m8, yes and yes again.
All files downloaded from @ApriliaM3 's link
Tab is alive and kickin'...again.:laugh:

Categories

Resources