hello guys, i need help on my o4x, actually i've failed to upgrade from v10c to v10f so each time i turn on my device it just looping on the s/w upgrade screen, thanks for advance, i really need help cuz this is emergency T_T
just enter recovery and do a clean factory reset
turn on mobile while holding VOL- down until it shows recovery, select "wipe data/factory reset" and reboot.
and you should be all fine.
if you installed clockworkmod and did a full back or used titanium to backup apps, you could save all configs, so try that for next time.
Dexter_nlb said:
just enter recovery and do a clean factory reset
turn on mobile while holding VOL- down until it shows recovery, select "wipe data/factory reset" and reboot.
and you should be all fine.
if you installed clockworkmod and did a full back or used titanium to backup apps, you could save all configs, so try that for next time.
Click to expand...
Click to collapse
i tried, but it just show the LG logo then goes to S/W upgrade screen
hiruik said:
i tried, but it just show the LG logo then goes to S/W upgrade screen
Click to expand...
Click to collapse
You should search a little more "how to flash", "how to unbrick", etc... I think that almost of the possible problems with "bad flash"
were already posted somewhere.
Just to avoid people being repeat over and over the same
Try this link (if you didn't yet...):
http://forum.xda-developers.com/showthread.php?t=1861854
Good luck :fingers-crossed:
RuedasLocas said:
You should search a little more "how to flash", "how to unbrick", etc... I think that almost of the possible problems with "bad flash"
were already posted somewhere.
Just to avoid people being repeat over and over the same
Try this link (if you didn't yet...):
http://forum.xda-developers.com/showthread.php?t=1861854
Good luck :fingers-crossed:
Click to expand...
Click to collapse
If you follow the tutorial above and still got the loop, try put the battery in (just remove the SIM and SD card), press and hold Volume - button and plug the USB cable
Related
Hi all,
what can i do?
You sure that what you're trying to perform is a hard reset, not a mere soft-reset?
If yes, this is really weird. Try flashing your ROM again.
jasczj said:
Hi all,
what can i do?
Click to expand...
Click to collapse
If you are trying to perform a hard reset and it doesn't work and phone won't reboot, then only other option you have left is to put phone in bootloader and flash stock/cooked rom.
Does phone reboot ok? Are you actually performing a hard reset i.e. turn phone off. Hold down vol up & vol down and then phone on while still holding down vol buttons. You will then be presented with a white screen with text asking you to press vol up once again to restore factory settings.
Fallen Spartan said:
If you are trying to perform a hard reset and it doesn't work and phone won't reboot, then only other option you have left is to put phone in bootloader and flash stock/cooked rom.
Does phone reboot ok? Are you actually performing a hard reset i.e. turn phone off. Hold down vol up & vol down and then phone on while still holding down vol buttons. You will then be presented with a white screen with text asking you to press vol up once again to restore factory settings.
Click to expand...
Click to collapse
yes ..colourful screen appear and after reboot still didnt help..phone wun sync so how can i flash my rom?
what is boot looder?
can someone gave me a step by step dummy guide?
thanks in advance
jasczj said:
yes ..colourful screen appear and after reboot still didnt help..phone wun sync so how can i flash my rom?
what is boot looder?
can someone gave me a step by step dummy guide?
thanks in advance
Click to expand...
Click to collapse
Have you tried a Hard reset?
As Fallen Spartan wrote : Are you actually performing a hard reset i.e. turn phone off. Hold down vol up & vol down and then phone on while still holding down vol buttons. You will then be presented with a white screen with text asking you to press vol up once again to restore factory settings.
If it doesn't help try to flash a cooked or stock rom but I recommend you to first try the hard reset.
jasczj said:
yes ..colourful screen appear and after reboot still didnt help..phone wun sync so how can i flash my rom?
what is boot looder?
can someone gave me a step by step dummy guide?
thanks in advance
Click to expand...
Click to collapse
Bootloader is the tri-coloured screen you are getting
If you can get phone in bootloader then you can still flash new rom.
First of all try a hard reset by doing the following:
1. Turn phone off
2. Hold down vol up & vol down
3. Continue to do No.2 and turn phone on
4. You will then be presented with a white screen with text asking you to press vol up once again to restore factory settings.
Once complete if phone still doesn't reboot you will need to flash new rom by doing the following:
1. Turn phone off
2. Hold vol down button only
3. Continue to do No.2 and turn phone on
4. You will be presented with bootloader screen (tri-colour screen)
5. Connect phone to pc and bottom of screen text should change from 'serial' to 'USB'. If this doesn't read cRaCKwHoRe's guide (see link below) as you may need to update pc drivers.
6. Now flash original stock rom from which you have downloaded from wiki. You can find stock roms here. To flash rom you will need to run ruu file from pc (this is rom you have downloaded)
Make sure you only flash original stock rom which was already on your phone. If you want to flash other roms you will need to follow cRaCKwHoRe's guide
I'd recommend reading the wiki so you understand more about the process and you phone
Good luck and keep us informed
Greetings. I ran into a major problem yesterday when i was playing around with titanium backup. I was a bit careless and touched some important system file. After which i was unable to reach the home menu nor restore the backup file. I rebooted and pressed the volume down button, and the "updating system.." icon appeared. Nothing happened for 1h, so i tried using the lg software suit to do a remote recovery. Nothing worked. I tried performing an update, hopimg the particular file might be restored, but the updater told me the new version is incompatible.
I'm a bit inexperienced in these matters, but i find it impossible that the bootloader could become permanently inaccessible due to a software error. I need to restore the original rom without accessing recovery mode on the phone - but how?
You're right, it's not possible.
You're trying to get into recovery wrong
Hold bother power and vol-, not just vol-
Rusty! said:
You're right, it's not possible.
You're trying to get into recovery wrong
Hold bother power and vol-, not just vol-
Click to expand...
Click to collapse
Thats what I thought I did, I always hold the power button until the boot screen appears. Still no improvement, seems I wont be able to restore my phone to factory default through normal means.
If you let it try and boot up, you might get it far enough to use 'adb reboot recovery'
If you ask me, the best solution is to flash the stock rom > root > restore titanium backup
As I said, there's no way I can reach any system menu whatsoever. The phone freezes at the LG logo on a normal boot, and in system recovery it freezes at "S/W Update". I can't do anything using the manufacturer's PC software, so what do I do? The rom is obviously rooted, but I'm not the one who performed the job so I don't know which software was used for that.
Optimus2XPrime said:
If you ask me, the best solution is to flash the stock rom > root > restore titanium backup
Click to expand...
Click to collapse
So how do I flash the stock rom? I can't get to the bootloader menu.
Niczo said:
So how do I flash the stock rom? I can't get to the bootloader menu.
Click to expand...
Click to collapse
Check my topic
http://forum.xda-developers.com/showthread.php?p=14807400#post14807400
Hi..
I have Rooted LG Optimus 4X HD
I try to change font by "Font Changer" , frist time change do will
try to chang again , it ask for reboot .. after reboot it still on LG logo :crying:
what i can do naw :crying: :crying:
sorry about my language..
help me please
umar1410 said:
Hi..
I have Rooted LG Optimus 4X HD
I try to change font by "Font Changer" , frist time change do will
try to chang again , it ask for reboot .. after reboot it still on LG logo :crying:
what i can do naw :crying: :crying:
sorry about my language..
help me please
Click to expand...
Click to collapse
Try "factory reset". Press "Vol-" + "Power" button, select "wipe data/factory reset", press Power" button, select "Yes -- delete all user data" and press "Power" button again.
If it doesn't works, re-flash the phone.
RuedasLocas said:
Try "factory reset". Press "Vol-" + "Power" button, select "wipe data/factory reset", press Power" button, select "Yes -- delete all user data" and press "Power" button again.
If it doesn't works, re-flash the phone.
Click to expand...
Click to collapse
it doesn't works
how to do re-flash ??
Yep LG does not like you to change their fonts. I have tried and the system jumps into a reboot loop.
I even changed the fonts and named them the same name as the LG fonts. Still same problem.
Just reflash the kdz.. You can find information in one of the threads. Search and you will find the answer.
_RSAobj said:
Yep LG does not like you to change their fonts. I have tried and the system jumps into a reboot loop.
I even changed the fonts and named them the same name as the LG fonts. Still same problem.
Just reflash the kdz.. You can find information in one of the threads. Search and you will find the answer.
Click to expand...
Click to collapse
i found many ways to reflash ,, that make me confused
and all has bad URLs !!
can you give me the best way to reflash here ?
with attach the tools ... please
umar1410 said:
i found many ways to reflash ,, that make me confused
and all has bad URLs !!
can you give me the best way to reflash here ?
with attach the tools ... please
Click to expand...
Click to collapse
Take a look at this video, maybe makes things easyer for you:
http://www.youtube.com/watch?v=MZx2zMrLLDo&feature=g-upl
Watch in 1080p and full screen
Thnx to all
I reflash my device by using KDZ
Download this file B2CAppSetup.exe LGMobile Support Tool 1.4.8.7 from here http://www.mediafire.com/?3rr1ae2c6c39vaa and update your phone, make sure you put your phone in download mode and make sure your have the LG 4X drivers installed from here http://www.4shared.com/rar/dUyxkV1v/lgunitedmobiledriver_s4981man3.html
to put your phone in Download mode, remove and reinsert the battery, volume down, make sure your usb plugged in the computer first and then plug it in your phone
So as LG-P880 flashing instructions were too much hassle for my taste
Here it is a very simple way to upgrade/downgrade your phones easy peasy
Everything will be gone so backup first!
Download this:
Mirror 1:
http://s000.tinyupload.com/index.php?file_id=01589528474127578975
Mirror 2:
http://www.mediafire.com/download/wu50af8uh99air7/P880-Flashtools.rar
Unrar and copy your downloaded new firmware inside LG Flash Tool 2014 folder
Browse to Driver folder and install/double click LGUnitedMobileDriver_S50MAN311AP22_ML_WHQL_Ver_3.11.3.exe file.
Shutdown and remove SIM&EXTSDCARD from the back of the phone. Leave battery in-place don't take it out.
Press and hold Vol(-) connect usb cable coming from pc->download mode
Run LGFlashTool2014.exe
Selections
CDMA or 3GQCT doesn't matter really
DIAG
KDZ file location
then select preferred flash mode
Normal Flash: Flash ROM without losing any data. Only use this when you need to fix system error. Beware of boot loop when flashing ROM that differ from current ROM on your phone or MOD ROM.
CSE Flash: Choose this option when you need a fresh format. All data will be gone. It's suitable for upgrading or downgrading ROM or simply use this when you need to back to Stock.
Done, enjoy!
Update:
If you get
This mode is for data backup at service center ...
Click to expand...
Click to collapse
in recovery repeat flashing the KDZ and you will get the stock recovery this time.
Wow, thx Demetris, you are my savior just in time.
With the online upgrade the phone is always stuck in a bootloop and the old offline method just didn't work as it gave me a file extract error, although I know I've done everything correct (maybe the issue was leaving the sim and sd card inside or selecting 3GQCT?)
Btw and fyi, the CSE method is only available if CDMA is selected.
Thanks for making this fast and simple tutorial that even works ^^
Thank you for the great tutorial. I tried exact accordance with my LG-P880 to update. Unfortunately it did not work, the device starts but then remains at the LG logo, no further reaction. Restart / reset no improvements. Options in Android System recoveryy <3e> do not work. Do you have an idea how I can still save my beloved P-880?
Use CDMA and select CSE flash. After update and phone sticks at lge logo remove battery hold vol +(99% of times you need to use - but for me was +) and press power on. On stock recovery factory reset and now phone will boot
I did and the unit freezes. The figure Android is flat and shows an exclamation mark.
jo dollert said:
I did and the unit freezes. The figure Android is flat and shows an exclamation mark.
Click to expand...
Click to collapse
Did you erase nv partition? from stock recovery?
If not check this V20c md5: 8dd721c1c6ec63c74d42b2931de8456f
KDZ
where can we find the original KDZ files?
Thanks in advance! :highfive:
Demetris said:
Use CDMA and select CSE flash. After update and phone sticks at lge logo remove battery hold vol + and press power on. On stock recovery factory reset and now phone will boot
Click to expand...
Click to collapse
jo dollert said:
I did and the unit freezes. The figure Android is flat and shows an exclamation mark.
Click to expand...
Click to collapse
For me it worked without a factory reset, just flashing and restarting.
Forget what I said, i think I did a factory reset and wiped nv partition before I flashed the new firmware with this tutorial.
@alberteske all firmwares can be found here: http://lg-phone-firmware.com/index.php?id_mod=15
but some links are broken, after clicking on a link you have to replace the "%2F" at the end of the adress with a "/"
Demetris said:
Did you erase nv partition? from stock recovery?
If not check this V20c md5: 8dd721c1c6ec63c74d42b2931de8456f
Click to expand...
Click to collapse
When I select the options in the recovery mode it freezes, no action will happen.
The MD5 number is correct.
baseband change without flashing whole kdz?
isn't a way to extract the baseband files and flash them without having to flash kdz + unlock + re-install everything...?
thanks a lot in advance Demitris!
jo dollert said:
When I select the options in the recovery mode it freezes, no action will happen.
The MD5 number is correct.
Click to expand...
Click to collapse
You sure is a P880 and not a P880G?
Demetris said:
You sure is a P880 and not a P880G?
Click to expand...
Click to collapse
Yes, LG-P880
jo dollert said:
When I select the options in the recovery mode it freezes, no action will happen.
The MD5 number is correct.
Click to expand...
Click to collapse
also for me it comes now only to recovery mode.
thats it now.
what to do ?
shows:
"This mode is for data backup at service center ..."
See no chance to make a factory reset
---------- Post added at 07:49 PM ---------- Previous post was at 07:45 PM ----------
Demetris said:
Use CDMA and select CSE flash. After update and phone sticks at lge logo remove battery hold vol + and press power on. On stock recovery factory reset and now phone will boot
Click to expand...
Click to collapse
it comes now only to recovery mode.
thats it now.
what to do ?
shows:
"This mode is for data backup at service center ..."
See no chance to make a factory reset
I cant go on... stucked on Bootloader..:
S/W Upgrade
Please wait
while upgrading...
i did what you wrote but cant go forward. I got this message after trying to put: normal flash: Please run or install ActiveSync program
/edit:
Connection to server fialed. Try again in a moment. (pressed OK).
now i am stucked at:
Upgrading your phone....
Do not disconenct your phone or remove you battery until upgrade is completed. Calling and messagin functions are not available druging the update process......
Demetris said:
Use CDMA and select CSE flash. After update and phone sticks at lge logo remove battery hold vol + and press power on. On stock recovery factory reset and now phone will boot
Click to expand...
Click to collapse
ok.
Think here you mean:
press and hold [vol -] and [power] until you got the "android recovery figure"
then clear cache and make factory reset
Demetris said:
Use CDMA and select CSE flash. After update and phone sticks at lge logo remove battery hold vol + and press power on. On stock recovery factory reset and now phone will boot
Click to expand...
Click to collapse
Somehow my phone got to the LG logo but is in bootloop. Tryed vol+ and power. I can get to stock recovery, but how to factory reset from there?
Reboot phone
ADB sideload
Factory reset
...something like that
I think that you must see that options when enter recovery(vol- and power button),then using volume buttons select factory reset and confirm with power button. I also have bootloop after flashing kdz but after factory reset phone boot properly.
BTW i use flash kdz tutorial not that method from Demetris
Sent from my Optimus 4X HD using XDA Free mobile app
xperia u20i said:
Reboot phone
ADB sideload
Factory reset
...something like that
I think that you must see that options when enter recovery(vol- and power button),then using volume buttons select factory reset and confirm with power button. I also have bootloop after flashing kdz but after factory reset phone boot properly.
BTW i use flash kdz tutorial not that method from Demetris
Sent from my Optimus 4X HD using XDA Free mobile app
Click to expand...
Click to collapse
correct.
used his new tool and tutorial. It worked then.
EB20XY said:
correct.
used his new tool and tutorial. It worked then.
Click to expand...
Click to collapse
i am stucked (again on LG logo)... pressed vol+ and power on and i see the Revocery mode (by LG) - written: This mode is for data backup at service center. After removing and reataching batter press power key to reboot and keep it using. Well this aint working... Only home button works (in recovery mode) and i dont see anything else, where to make a factorty reset...
/edit:
vol- and power got me into the recovery menu. Factory reset and now its no bootloop. Well let me see on...
Vol- was the key
Sent from my Optimus 4X HD using XDA Free mobile app
(Sorry for my eanglish)Hi gyus. I broke ma phone, but not totaly. I just want to install cyanogen, so I do much things on phone, but all of my guides are in Polish. I can paste it here but i don't think it will be helpful. So I install revowery TWRP from XDA using aboot v10b when I have v10f system and flashify, but i can't install CM. So i downgrade my system to 10b and than i install recovery. Showed up purple screen, so I turn phon on in download mode and by LG Mobile Support Tool I install oryginal system. Now I can use phone, but I cant go to recovery or do factory reset. When i wan't to do factory by kesy combination vol- + power i can see "Factory Reset Processing..." and after that only black screen. When I wan't to go to recovery by flashify I can only see
DBI Apps Watchdog Reset
DmiGod Crash Handler: DBI Apps Watchdog Reset
Option: SD card ram dump mode.
Push below files to sdcard before test.
rdcookie.txt, rtcookie.txt
Please do following action
1) Ram dump Mode. Please connect USB.
2) Get the ram dump image using QPST Configuration.
3) If sdcard ram dump enabled just wait for reboot.
4) Collect ramdump files from your pc to sdcard.
5) Send e-mail to [email protected]
What I must to do now?
Like you said:
"LG Mobile Support Tool I install oryginal system"
If you flashed the KDZ with LG support tool you don't have a custom recovery now, so your phone doesn't boot to it because it's locked.
You must root, unlock bootloader and install a custom recovery again.
my phone screen is purple with a written white letters: "DBI Apps Watchdog Reset" among other writings as well. What I have quefazer to be able to use it again?
My mobile phone is a L40
Has anybody over come this problem. I have it on my LG L40.
Thanks
mnico1973 said:
Has anybody over come this problem. I have it on my LG L40.
Thanks
Click to expand...
Click to collapse
Have you try to connect your phone to pc when holding vol- button? It works on l90
leserti said:
Have you try to connect your phone to pc when holding vol- button? It works on l90
Click to expand...
Click to collapse
Hello thanks for the reply.
Yes I tried that and it still comes up with the purple screen and the DBI Apps Watchdog Reset message.
mnico1973 said:
Hello thanks for the reply.
Yes I tried that and it still comes up with the purple screen and the DBI Apps Watchdog Reset message.
Click to expand...
Click to collapse
Try all combnations, that You can made, so vol+ and power button, vol- and power button etc. I'm sorry, but I forgot how I made this trouble. I'll serch on computer, and i will try to remind every steps that I made.
leserti said:
Try all combnations, that You can made, so vol+ and power button, vol- and power button etc. I'm sorry, but I forgot how I made this trouble. I'll serch on computer, and i will try to remind every steps that I made.
Click to expand...
Click to collapse
I will keep trying thanks
ey... grettings i cant find solution to watchdog reset.... anybody could find how fix that?
I have the same problem. LG D290N purple screen "DBI Apps Watchdog Reset". Cant enter download mode
I am extremely late to this but has anyone been able to solve it? I have an lg class/zero