finally full working arabic patch for ECLIPSE 3.0 - Motorola Droid Bionic

hello every body
:laugh::laugh:
finally after working i succeded to make a FULL WORKING ARABIC PATCH for ECLIPSE 3.0
tested by me .
how to install :
1. you must have a rooted device with BIONIC BOOTSTRAP installed on it.
2. copy the patch on your sd card.
3. do a backup using clockworkmode recovery.
4. install the pacth.
4. do a wipe data /factory reset .
5. reboot your phone .
6.enjoy connected arabic letters.:good:
download from here
eclipse_3.0_arabic_patch_by_Aboubakr48.zip

Related

[Q] Custom ROM process

Could someone just confirm I am doing the following correctly.
1. Install rootable Stock ROM via Odin (usb).
2. Root and CWM using "DooMLoRD_v4_ROOT".
3. Install Mobile Odin
4. Place Stock rom onto internal SD (ie N7000XXLA1) From here I
5. Upgrade using Mobile Odin. (So I can keep root)
6. Place customer ROM with matching running ROM version on SD. ([ROM] ROCKET ROM - v17 - XXLA1)
7. Run using ClockworkMod.
I'm sure I'm going wrong somewhere, have only tried once and it failed. Had an error because it could not find the .jpg for start and close screens.
Any help or pointers would be helpful.
Thanks
Exceluk1
refer here...
Yep have been using without any issues.
Up until I get to :-
5. Upgrade using Mobile Odin. (So I can keep root) to N7000XXLA1
It keeps showing "logo_qt.jpg" draw failed.
If i try and power down the handset I also get an error "charging_qt.jpg" draw failed.
If i flash the N7000XXLA1 without root using Odin USB this works fine but cant root then
Where am I going wrong.
-root your NOTE first,
-download THIS - open
-click already-rooted.bat.
-download ROCKET ROM - v17 - XXLA1 - copy to your sd card
-turn off your device.
-open CWM
-wipe data, cache, etc
-flash ROCKET ROM - v17 - XXLA1 with CWM
-wipe data, cache, etc
-Reboot and you're DONE
follow that steps, you should be fine.
That was my first step when i got my NOTE yesterday afternoon.

[Q] Installation process (RocketROM v1 - JB) -- Confusion

Hi,
I am sorry if this question is asked earlier. i tried searching but didnot find any thread related to my problem
I am planning to install Rocket Rom v1 - JB with below mentioned process as described in actual thread.
i have a confusion, process says "copy ROM on your USB-storage". i want to ask, is it actually USB storage or does it mean ext SD card.??
Installation:
make sure you are on a rooted ICS-ROM or JB-ROM with CWM recovery and brickfree kernel installed
copy ROM on your USB-storage
boot in Recovery
FullWipe (also when coming from other Sammy-JB-ROM!)
flash ROM (it will reboot automatically in most cases)
after initial setup, open Super SU-app and you have to update SU-bin (app will do that for you if necessary!)
enjoy
Click to expand...
Click to collapse
Thanks
RR V1_JB
I will tell you how to flash Rocket Rom v1 JB
1. Download rom.zip
2. copy rom.zip to internal memroy or SD card
3. Flash any safe Kernels like Philz, Hydracore, Abysis Kernel
4. Reboot in recovery
5. Do Data wipe, wipe cache partition and dalvik cache
6. choose Install ZIP from SD card
7. select internel or external sd card in which you have copied rom.zip
8. choose the rom.zip file and flash it
9. it will automatically reboot after flashing
10. wait for sometime to get the mobile to boot to new rom
11. once you have got home screen, then reboot again
12. then after coming homescreen check menu button is working or not
13. if not working then reboot recovery
14. do Do Data wipe, wipe cache partition and dalvik cache again
15. flash rom again
16. now your home button issue will get resolved
17. Enjoy new rom
If you have Music Player Force close Then do the following
1. install root explorer
2. download music Player.apk (http://www1.zippyshare.com/v/85093893/file.html)
3. download musicfx.apk (https://www.dropbox.com/s/xt3jkrfa7w6ni43/MusicFX.apk)
4. copy music player.apk and musicfx.apk to root/system/apps and set permission to rw and then reboot
5. Now music Player will be working fine

pure l rom for spice mi 504

It is a ported rom by me #shaizada for spice mi 504
1. u have rooted device .,,, if not root through kingo root,iroot software.
2.you have cwm/twrp/philz recovery installed if u dont have any of these recovery ,,,then i gave u my developed recovery through mtk droid tool.... see attachments for recovery.
3.fisrt root your devise then instal mobile uncle tool from playstore then backup your imei and then copy recovery image and pure l.zip file in ur devise then open mobile uncle tool and click on recovery update and choose your recovery.img file.
4.Download patch.zip from from attachments and place in ur sd card
5.then go to ur recovery menu (switch off ur phone then press home+volume up button)
6. Delete wipe data factory reset/wipe cache/wipe davlik cache.
7.open mount and storage format system/data/cache.
8.then go to instal zip from sd card and instal rom then instal patch file.
ALL DONE NOW REBOOT UR PHONE AND ENJOY
keep enjoying its totally bug free
#NOTE: Download mobile uncle tool from attachments......IF YOU LOST YOUR IMEI NO. THEN resotre ur imei no which you backup before....
Download rom from this link https://docs.google.com/file/d/0B0NIHXGf9zR3N2tvZ0JwQ2FSejg/edit?usp=docslist_api
this rom works awesome, no bugs , ive been using it since long , no issues , awesome
:good::laugh:
thanks
Google keyboard is stopping continously even after installing patch.zip pls help me out

ADVANCED_DOWNLOAD_MANAGER(best replacememt of stock downloader):-KeepModified

hlo friends
THIS IS. THE BEST AND SPEEDEST DOWNLOAD MANAGER FOR YOUR ANDROID DEVICE U MUST HAVE TO INSTALL IT
INSTALLATION METHOD:-
- EXTRACT THE ZIP
-THEN U GOT 2 ZIPS
-INSTALL (ADVANCE_DOWNLOAD_MANAGER.ZIP
*******×REBOOT RO RECOVERY
-WIPE CACHE
-INSTALL ZIP
-DONE:good:
@majay519 is this working on all phones? I am using sgs2 int with 5.1.1. I don't want to get soft brick
yes buddy it's working on all devices (4.4+).no problem flash it .it can't bricked ur phone

Boot loop after installing CM 13 + TWRP on SM-G900K

Hey,
All my steps:
1. Root device: LINK
2. Install TWRP: LINK
3. Install new CyanogenMod by this LINK
After installing CyanogenMod 13 and boot.img my device just in boot loop.
I've tried install 12 CM, but no luck.
So ... what I need to do ?!
Thank you for your HELP !
Okay, to install the cm there athe this steps:
1 - Open TWRP (I don't know what you used, but i assume you used this one https://dl.twrp.me/klte/twrp-3.0.0-0-klte-klte.img.tar.html )
2 - Wipe Dalvik / ART Cache, Cache, Data and System (do not wipe Micro SDCard or Internal Storage, you need your zips)
2.5 - Wipe System is the only one you probably doens't HAVE to do, but i recommend to do. The other 3 are 101% necessary, because old apps or app caches WILL bootloop you.
IF YOU WIPED SYSTEM, DO NOT REBOOT
3 - Install the Rom Zip file (Extracted from the post https://download.cyanogenmod.org/get/klte-latest.zip )
4 - Install Open Gapps or (anything) Gapps for 6.0 (Again, extracted form the post http://opengapps.org/?api=6.0&variant=nano )
4.5 - As you know, the korean rom is kind different, it requires te boot.img for some reason, well, flash it. (This one, of course http://forum.xda-developers.com/attachment.php?attachmentid=3823989&stc=1&d=1469502182 )
5 - Reboot and enjoy
If you did anything different or in any different order, i suggest you try again, and just a detail, this is the S5 Mini section, not the S5, DO NOT USE files you found here, they WILL bootloop your device

Categories

Resources