Related
Hi, i need your help again, i installed the rom[AOSP][Port]★I9295★ Official 4.2.2 - S4 Google Edition - Feel the Experience of Nexus and i have two problems, the first is i don't have speaker phone when i try to use it in a call, the second is when i conect my phone to my pc, i don't have mass storage and mtp. I hope some one can explain me step by step how to fix this two problems.
My phone is a Galaxy S 4 Active i9295.
Greetings and thanks.
nesgcmx said:
Hi, i need your help again, i installed the rom[AOSP][Port]★I9295★ Official 4.2.2 - S4 Google Edition - Feel the Experience of Nexus and i have two problems, the first is i don't have speaker phone when i try to use it in a call, the second is when i conect my phone to my pc, i don't have mass storage and mtp. I hope some one can explain me step by step how to fix this two problems.
My phone is a Galaxy S 4 Active i9295.
Greetings and thanks.
Click to expand...
Click to collapse
The fastest and easiest way to solve these problems is to read and/or search the thread. Both of these questions have been asked and answered.
For instance if you search that thread for the word "speakerphone" the very first result will give you the answer for the fix and ultimately links to post #125 of that thread.
Similarly if you search "usb" it takes slightly more time, but the 6th result will give you the answer you're looking for. It links to post #133 of the thread.
Please use the search button and read through the thread a little bit before you post questions. Most of the answers can be found in a couple minutes. Good luck with the fixes.
Thanks for the reply, maybe was my mistake, not to say that I have attempted to apply the patch to fix the problem with the microphone when I activate the speaker, but not work for me, so I want to see if I skip any step, and know what i must do step by step, and had also watched the transfer via ssh but although it is a solution, not like me at all.
i flashed asop google edition with safetrap for s4a，i can use data connection in stock rom but not in custom rom，i've tried *#*#4636#*#*，which worked in stock rom，but not in the custom rom，resulting in error request message，can any1 tell me the key words to search the forum for this problem？
Hi,
Credits to the user Azlun who initially posted the solution on the gfan foruns (In chinese).
I'm just creating a thread here in xda to raise attention for more developers and other people which might be interested.
Azlun managed to enable some extra bands in the Nexus 5 phones. Since a lot of people import the phones, relocate or travel, this can be useful for people.
I'm not responsible if you burn your phone or make a brick from it. It has been confirmed to work for a couple of users without any downsides.
Before making any changes, please make sure you do an EFS Backup (preferentially using TWRP) as well as a backup of your original NV in a qcn format details using the QPST software download tool (instructions bellow).
This hack will be maintained even if you flash any roms or OTAs, unless you restore your EFS partition from a backup or the original qcn via the QPST software download tool.
User Xtachix put together the basis for this tutorial! Thanks! (Still under development)
Prerequisites:
First thing is first, you will need to download the file available (Will update later today).
Windows
Google latest usb driver found in: latest google usb driver
adb binaries installed. Google for it, a lot of resources.
QPST_2.7.411
QXDM-3.12.714
lg_android_31010.exe for diag drivers
Walkthrough/guide for adding Band 3 and 8 to D820 and 2 and 4 to the D821. Make sure you select the correct file.
Don't cross flash, as we don't know what might happen!
Preparation Windows
Install the LG Diag Drivers executing the file lg_android_31010.exe
Install the QPST tool, QPST_2.7.411
QXDM is optional and used to debug / confirm the mod has been done.
Preparation Nexus 5
Install the app Nexus 5 Field Test mode
Make sure you have the phone rooted
Enable usb debugging
Now you need to obtain your SPC code. For doing it open Nexus 5 Field Test Mode App, got to settings (view), then LTE, and click on edit. At the same time use logcat to get the SPC code
Code:
adb shell
logcat -d | grep "commandId\ 200"
You should get something like
D/LG_SVC_ITEMS(18638): getCommands commandId 200 = ******-END
Where the "*" values are the digits to your SPC.
NOTE YOUR SPC CODE DOWN!!
Now let's make sure that your NV becomes writable, go back into the Field Test Application, input the SPC code from above, and make sure the settings look like the picture bellow. Important is to disable band 26 and set priority of 41 to 0. (Don't worry band 26 will become available again after flashing the qcn).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After setting it, click back and your phone will reboot. This is expected
Make sure the kernel you are using supports DIAG mode. If you are not sure, reboot your phone into bootloader mode and boot using fastboot this kernel (even though it says 4.4.2, it will work for 4.4.4).
Code:
fastboot boot 4.4.2_diag_BOOT.img
Reboot phone into the ROM and keep it connected to the computer.
Executing the hack
Now you have to use ADB through a pc, to get you phone into DIAG mode
Code:
adb shell
su
setprop sys.usb.config diag,adb
your device will disconnect and reconnect to become a COM port device. that's what you want.
Open device manager and check the COM port of the nexus, note it down.
Open your recently installed QPST software in windows. Windows 7/8/8.1 make sure you execute it as admin!
Select the ports tab and add a new port. the COM port that you noted down is what you want to select on this window. Click ok.
Now you will be back at the "ports" tab with your nexus 5 COM port. Up in the menus select "Start Clients" and select Software Download.
To be safe let's do a backup. Select the backup tab and perform a backup of your initial NV status to any file in a safe location on your computer. It may take around 5 minutes to perform the full backup.
Select the Restore tab.
Now select the correct QCN file, attached on this post.
D820_RF_LTE_ENABLE_B3_B8_RemovedSameItem_NOT_Overrided.qcn - Adds LTE band 3 and 8 to the D820. (Band 8 not tested, let us know if it works)
D821_RF_LTE_ENABLE_B2_B4_Filtered_RemovedSameItem_NOT Overrided.qcn- Adds LTE bands 2 and 4 to the D821. (Band 4 not tested, let us know if it works). File updated due to a minor typo.
for your SPC code, use what you have obtained above.
Allow phone/file ESN mismatch" has to be ticked.
Click Start. After a few seconds you will see and Error .
Errors: Could not Reset the Phone. Communication Errors Occurred. Do not panic, this means you did everything correctly
Reboot your phone.
You should the extra bands working. Let us know if works, since we are still experimenting. We are specially looking for feedback on bands 4 for the D821 and band 8 for D820.
There is no easy way to confirm if the new bands are working or not without connecting to them.
Using QXDM tool you can confirm the mod has been applied, but if you are not in an area with LTE you cannot confirm it works.
Some debug steps is to make sure your Preferred Network mode is selected as "LTE (recommended)" and your SIM Card has 4G enabled.
To disable the hack, just restore the original EFS (preferentially)and/or the qcn backup.
For more details take a look at the service manuals available here. Interesting sections are 3.5 and section 5 the RF Block.
Keep in mind that we can't enable extra bands which are not available in any of the version of the phones.
Also D820 cannot work on B20 (HW is different), neither B7 (HW is not there at all).
This will be much better, But I think it should goes to Android Development not Original Android Development.
I think we have to add some screenshots to guide the others
looks to be a repost of this thread - http://forum.xda-developers.com/google-nexus-5/general/sprint-enable-tri-band-lte-n5-t2530061
SOHKis said:
looks to be a repost of this thread - http://forum.xda-developers.com/google-nexus-5/general/sprint-enable-tri-band-lte-n5-t2530061
Click to expand...
Click to collapse
Why would you say that? Despite being related, band 3 LTE is not even used in the Americas. This allows you to get LTE band 3 in an a an Nexus 5 D820, while the other topic allows you to enable the LTE Band 41 (Google enabled band 41 to all the D820s in 4.4.4?).
Seems Nexus 5 have a max. number of enable LTE bands active at the same time, disabled 26 and actived 7, using fffft's method and vndnguyen's calculator.
THANK YOU GUYS!
DigitalJosee said:
Seems Nexus 5 have a max. number of enable LTE bands active at the same time, disabled 26 and actived 7, using fffft's method and vndnguyen's calculator.
THANK YOU GUYS!
Click to expand...
Click to collapse
Hey I'm trying to do this type of Mod for the first time on my phone...So forgive me if I ask something stupid...
I have a few doubts about the steps mentioned in fffft's post:
Step 3 - Is Custom ROM really necessary for Nexus 5?
Step 6 - I cant find the USB settings menu using any of the codes mentioned...
For the moment i'm stuck here...
Can you please solve my queries & If you dont mind can you post some details about Nexus 5 specific changes to be made to the method mentioned in fffft's post
meher91 said:
Hey I'm trying to do this type of Mod for the first time on my phone...So forgive me if I ask something stupid...
I have a few doubts about the steps mentioned in fffft's post:
Step 3 - Is Custom ROM really necessary for Nexus 5?
Step 6 - I cant find the USB settings menu using any of the codes mentioned...
For the moment i'm stuck here...
Can you please solve my queries & If you dont mind can you post some details about Nexus 5 specific changes to be made to the method mentioned in fffft's post
Click to expand...
Click to collapse
If you want to enable LTE band 3 only, you don't need custom ROM/Kernal. You will only need Root.
Sent from my Nexus 5 using Tapatalk
DigitalJosee said:
Seems Nexus 5 have a max. number of enable LTE bands active at the same time, disabled 26 and actived 7, using fffft's method and vndnguyen's calculator.
THANK YOU GUYS!
Click to expand...
Click to collapse
Care to elaborate more details? Is it working?
meher91 said:
Hey I'm trying to do this type of Mod for the first time on my phone...So forgive me if I ask something stupid...
I have a few doubts about the steps mentioned in fffft's post:
Step 3 - Is Custom ROM really necessary for Nexus 5?
Step 6 - I cant find the USB settings menu using any of the codes mentioned...
For the moment i'm stuck here...
Can you please solve my queries & If you dont mind can you post some details about Nexus 5 specific changes to be made to the method mentioned in fffft's post
Click to expand...
Click to collapse
I am also finding a way to open USB settings menu. Can anybody help us out with that?
If anyone founds a way to edit the QCN file please share with us. I want to replace the NV Items there to support the bands I need, but QCNView won't allow editing..
Which provider uses these bands? 3 and 41
JohnnyHempseed said:
Which provider uses these bands? 3 and 41
Click to expand...
Click to collapse
http://en.m.wikipedia.org/wiki/List_of_LTE_networks
Sent from my Nexus 5 using Tapatalk
meher91 said:
Hey I'm trying to do this type of Mod for the first time on my phone...So forgive me if I ask something stupid...
I have a few doubts about the steps mentioned in fffft's post:
Step 3 - Is Custom ROM really necessary for Nexus 5?
Step 6 - I cant find the USB settings menu using any of the codes mentioned...
For the moment i'm stuck here...
Can you please solve my queries & If you dont mind can you post some details about Nexus 5 specific changes to be made to the method mentioned in fffft's post
Click to expand...
Click to collapse
DId a minor update to the steps. Still it's not straightforward and will require some reading, but at least it's better!
Would it be possible to use a method similar to this to enable Band 12? The new T-Mobile deployment on it is making the N6 look pretty nice, even with the giant size and price tag.
Thank you to post my Sept 20th gfan post http://bbs.gfan.com/android-7648826-1-1.html
band3 enablement here.
To edit qcn,
Who can find QRCT from Qualcomm; just use QRCT-TOOLS-NV Manager,1st Save qcn as xml and edit it in text,
Then save it with QRCT-TOOLS-NV Manager again to qcn.
For who can not find it, I have no idea.
Sent from my SM-G9006V using XDA Free mobile app
Awww yissss
LTE works now in Oman
Thank you so much
Sent from my Nexus 5 using XDA Free mobile app
Azlun said:
Thank you to post my gfan post band3 enablement here. To edit qcn,you need qrct-nv tools,to save qcn as xml and edit it in text,then save it with qrct again to qcn.
Sent from my SM-G9006V using XDA Free mobile app
Click to expand...
Click to collapse
Great job Azlun, could you make a qcn file for D821 with added 2/4 LTE bands please?
So will it be possible to covert a D820 to D821 or vise versa?
Sent from my Nexus 5 using XDA Free mobile app
Qcn for D821 to enable Band 2 and band 4 for North America Opeartors
cornholio_rules said:
Great job Azlun, could you make a qcn file for D821 with added 2/4 LTE bands please?
Click to expand...
Click to collapse
Here attached the qcn for band2 and band4 enablement, my NEXUS5 D821 is not in hand, so not test yet.
you can just try and let us know the results.
ATTENTION:
before below steps, use TWRP to backup your EFS 6MB file can copy it to your PC safe space, also, use QPST-Software Download-Backup tab to save a qcn file for value restoring, Please note EFS 6MB is more batter than backuped qcn. both these you should do in order to further fallback when you lost your direction.
Trail 1. User QPST-Software Download-Restore Try:
Fail solution\D821_RF_LTE_B2_B4_NV8628_NV6829_Set.qcn,
Trail2. touch back key in NEXUS5 Field Test Mode-Setting-LTE-Edit-input correct SPC as POST#1 here, then NEXUS5 will give you a button to restart and checked your LTE is working or not with LTE Discovery-EARFCN-Check
I am 99% sure it will FAIL since this old method do not patch on NV24227,NV24229;
Trial3. Do Trial1,Trial2 with My recommend qcn:
recommand\D821_RF_LTE_B2_B4_Filtered_RemovedSameItem_NOT Overrided.qcn
Trial4. if Trial3 fail to make you found the LTE, Do Trial1,Trial2 with Then restart your phone using
2nd solution\D821_RF_LTE_B2_B4_Filtered_RemovedSameItem_Overrided.qcn
Trial5. if Trial4 fail to make you found the LTE, Do Trial1,Trial2 with Then restart your phone using
2nd solution\D821_RF_LTE_B2_B4_Filtered_AllItems_Overrided.qcn
NOTE: the later solution you used, the more NV Items you have been overrided, that is bringing your RF Front end go further from factory settings. each xml files inside my attachment is telling you what Items you are modifying, you can compare.
Please note that NOT all the bands can be enabled in this way, the limitation is the Hardware Radio Frequency Front End components design in the Service manual page 203.
DummyPLUG said:
So will it be possible to covert a D820 to D821 or vise versa?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
NO, you can not, since D821 removed band41 Radio Frequency Front End components Filters and Power Amplifier Module,
Another side, D820 removed band 7 Radio Frequency Front End components, even they both using one PCB with difference reserved space for different bands.
if you are a expert on PCB soldering, you can add it back to PCB, then use my qcn to patch it depand on your device name.
---------- Post added at 03:30 PM ---------- Previous post was at 03:24 PM ----------
DigitalJosee said:
Seems Nexus 5 have a max. number of enable LTE bands active at the same time, disabled 26 and actived 7, using fffft's method and vndnguyen's calculator.
THANK YOU GUYS!
Click to expand...
Click to collapse
band 7 is cut in Hardware in D820 according service manual PCB pictures vs D821. so only PCB soldering expert can find a solution.
document is here:
http://forum.xda-developers.com/google-nexus-5/general/service-manual-d821-t2791303
and I have some explanation in Chinese here:
http://bbs.gfan.com/android-7664034-1-1.html
---------- Post added at 03:44 PM ---------- Previous post was at 03:30 PM ----------
M.Noury said:
http://en.m.wikipedia.org/wiki/List_of_LTE_networks
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Please note that wiki page just only list all official documented for China, I tried to persuade the admin to update band 1 and band 3 info for China Telecom, and band 3 info for China Unicom, but fail.
THE Fact is Band 3 is widely used for national coverage over 44 cities by both Operators above in a commercial purpose.
and band1 is used by China Telecom for some area Outdoor and some shopping mall indoor coverage.
the government documents will tell you those are trial networks, but the fact is all 4G USIM cards from CT and CU is major using such network for 4G user service,
Another side, Band41 is official assigned to All China Mobile, China Telecom and China Unicom for also 1 year, but all of these operator do NOT use it for widely coverage outdoor, the most investment is from China Mobile, only some down-town new base stations or new deployment area are using band41. it is not a full coverage network, and network based Fast Return to band41 seems still have problem in current China Mobile networks. Further info, China Mobile major 4G networks is band39 for Outdoor and band40 for indoor.
[Q&A] [rom][5.0.2][lollipop][m7][linaro] Resurrection Remix 5.2.9 update 16-01-2015
Q&A for [rom][5.0.2][lollipop][m7][linaro] Resurrection Remix 5.2.9 update 16-01-2015
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [rom][5.0.2][lollipop][m7][linaro] Resurrection Remix 5.2.9 update 16-01-2015. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Anyone else having problems with Resurrection Remix 5.2.9 and Android Wear? (Specifically the Moto 360?) I can get it to pair, but it won't connect, even after rebooting both the phone and the watch.
tylermenezes said:
Anyone else having problems with Resurrection Remix 5.2.9 and Android Wear? (Specifically the Moto 360?) I can get it to pair, but it won't connect, even after rebooting both the phone and the watch.
Click to expand...
Click to collapse
I don't own an android wear to test ,but since it is a Bluetooth connection I think it is like connecting a headphone and my head phone works just fine.
I will check on that and get back to you if you can post a log cat or some more detail that would be great if you can't that's fine
I attached the logcat.
I included the logs generated when I click the connect button on both the watch and the phone. Let me know if there's anything else I can do to help figure this out. (I'm not much of an Android developer, but I'm a fairly experienced developer overall.)
tylermenezes said:
I attached the logcat.
I included the logs generated when I click the connect button on both the watch and the phone. Let me know if there's anything else I can do to help figure this out. (I'm not much of an Android developer, but I'm a fairly experienced developer overall.)
Click to expand...
Click to collapse
thanks for the logcat file very helpful I will see what I can do about it thank you for your help
Edit : not sure if the problem is on the watch or on the phone what versioon of android is on the Moto 360 ? and can you connect it to other phones ?
edit 2
fiocco said:
Ok there is no channel auto to set in ad hoc i have only a lot of frequency but i don't know witch using for connect to my print scx 3205.
Now i see my print in ad hoc in my phone but i can't connect canal RF 1 is 2412 mhz (same as the usb key wifi) only the IP is missing i see 0.0.0.0 i know by default is 192.168.1.100:200 of my print but how to set this in my phone ?
Can you do ad hoc in adb file archive zip ? it's for flash on over phone with TWRPplz thank you
Click to expand...
Click to collapse
long press on you ad hoc network then click edit network
a pop up shows up check advanced then scroll down with you finger you see IP setting set ad DHCP click on it then choose static IP adress you will have the option to ad IP adress manually
please ask your questions in this thread and not the rom's thread thank you for your understanding
Thank you now it's working i can print with my phone in ad hoc but can you make an adb archive file of wifi ad hoc ? it's for flashing with TWRP for another phone Samsung, plz thank you.
fiocco said:
Thank you now it's working i can print with my phone in ad hoc but can you make an adb archive file of wifi ad hoc ? it's for flashing with TWRP for another phone Samsung, plz thank you.
Click to expand...
Click to collapse
adb works fine with ad hoc use adb over network in the developement option
lord-ralf-adolf said:
Edit : not sure if the problem is on the watch or on the phone what versioon of android is on the Moto 360 ? and can you connect it to other phones ?
Click to expand...
Click to collapse
The watch is running 5.0.1, which is the newest out. It connected when I was running CM Jelly Bean (before I installed this mod), as well as to my tablet which is running Lollipop 5.0.2, so I don't think it's a problem with the watch.
lord-ralf-adolf said:
adb works fine with ad hoc use adb over network in the developement option
Click to expand...
Click to collapse
No it's not my question, i want now how to add ad hoc mod on another phone (Samsung galaxy grand 2) it have the same problem no see ad hoc networks connexion ? please thank you.
fiocco said:
No it's not my question, i want now how to add ad hoc mod on another phone (Samsung galaxy grand 2) it have the same problem no see ad hoc networks connexion ? please thank you.
Click to expand...
Click to collapse
You want ad hoc support on an other phone ,sorry it can't be done via a simple zip the ROM for you device need to be compiled from source and I can't do it because I don't have a galaxy grand 2 ,sorry
If you have other questions about this ROM for HTC One I will be more than happy to help
Ok or just make a simple zip of ad hoc mod for flash TWRP for HTC M7, please thank you.
fiocco said:
Ok or just make a simple zip of ad hoc mod for flash TWRP for HTC M7, please thank you.
Click to expand...
Click to collapse
ad hoc is not just a mod flash able via recovery I can't do a zip for HTC M7 or any other device it is impossible to extract because it is in the core system it self may be someone else can
Ok but how to activate ad Hoc on another rom HTC M7 ? is very usefull i know only you to do that.
fiocco said:
Ok but how to activate ad Hoc on another rom HTC M7 ? is very usefull to know i know only you to do that.
Click to expand...
Click to collapse
the ad-hoc support has been successfully merged to Cyanogen's official source code any rom will have it automatically if the device is capable of
Hello, can you add more french translation in your rom ? i can help you for that, please thank you.
fiocco said:
Hello, can you add more french translation in your rom ? i can help you for that, please thank you.
Click to expand...
Click to collapse
of course I will translate as much as I can
but you can help give me your gmail so I can add you to the translation project on google transltion toolkit
tylermenezes said:
The watch is running 5.0.1, which is the newest out. It connected when I was running CM Jelly Bean (before I installed this mod), as well as to my tablet which is running Lollipop 5.0.2, so I don't think it's a problem with the watch.
Click to expand...
Click to collapse
Im having the exact same issue with the moto 360 after installing this rom.....my tablet and the watch connect just fine. any suggestions??
Dreadedfox said:
Im having the exact same issue with the moto 360 after installing this rom.....my tablet and the watch connect just fine. any suggestions??
Click to expand...
Click to collapse
Right now I have no fix, I will fix that as soon as I can
lord-ralf-adolf said:
Right now I have no fix, I will fix that as soon as I can
Click to expand...
Click to collapse
the fix was rather easy....reset the moto 360 and delete and reinstall android wear. thanks
Does this ROM has an option to change Lockscreen wallpaper?
Hi all.
IMPORTANT S7 T-Mobile and S8 T-Mobile are Qualcomm based and MY METHOD DOES NOT WORK. I WILL UPDATE WHEN/IF IT DOES
UPDATE 27.01.2018
MAGISK........
I am having trouble unlocking on phones with Magisk installed for ROOT
Nothing against Magisk, I personally use and love it. Feel free to install this AFTER UNLOCK
I'm just having trouble with the unlock using Magisk.
I am offering a free unlock via
I will still gladly accept any donations that come my way via PayPal ([email protected])
But DONATION is 100% OPTIONAL
All i ask is RESPECT and PATIENCE. (if these are not given then I may CHOOSE not to help you)
Remember this is taking time away from my wife and family to help YOU!
This is a FREE remote unlock service. AT YOUR OWN RISK.
No, I will not share my method..... as it could get patched by Samsung.
Here we go........
SEE CURRENT SUPPORTED MODELS AND FIRMWARES HERE
F.A.Q
Q. What if my IMEI is bad or blacklisted?
A. There are a few times of blacklist... T-Mobile seems to block INTERNAL only if non payment. Others will block if non payment or lost/stolen.
This does not effect SIM unlock, I can do it regardless.... However, you WILL NOT GET NETWORK SIGNAL IF BLOCKED
Check here for T-mobile https://www.t-mobile.com/verifyIMEI.aspx and also here for all models http://imei24.com/blacklist_check/
If you are not sure ask first!
Q. Can you change/repair my IMEI?
A. HELL NO. This is not only against XDA Rules but it is illegal in most countries, including mine.
Q. Is this really free?
A. Yes, although I do hope for a donation for my time and effort
Q. When are you available?
A. See below.
Q. Can we get on with it all ready?
A. Yes!
Remote Sim Unlock Preparation
Contact
Please be considerate of my time zone this it GMT +03 (UTC +13), check here NZDT https://www.timeanddate.com/time/zones/nzdt I am usually available after work 5PM until 8PM.
I am also available some weekends. Leave me a message on hangouts here with [email protected] and i will get back to you ASAP.
Please contact me when you are ready after reading below. Contact [email protected] via Google Hangouts.
If you do not have a reply within 24 hours then please email me with your gmail address on [email protected] and I will add you to hangouts.
Google Hangouts is needed so you can follow directions as I unlock your device. Everyone with a Google accounts has Google Hangouts.
You can access it via hangouts.google.com
Phone Settings ALL Models
Disable FRP by enabling OEM UNLOCK
http://techbeasts.com/how-enable-oem-unlock-android-lollipop-marshmallow/
Enable USB debugging
https://forum.xda-developers.com/fire-phone/general/guide-enable-usb-debugging-setup-t2859697
Revoke USB authorization (if applicable)
Developer Settings > Revoke USB authorization
GSM Only
Phone dialer > *#0808# > USB = AP
Phone dialer > *#0808# > USB SETTINGS = DM + ACM/MODMEM + ADB (note, will say ACM or MODEM)
If and only IF the above doesn’t work then try:
Developer Settings > USB Configuration > RNDIS (USB Ethernet)
SPRINT Only
Phone dialer > ##3424# >Qualcomm USB settings > DM + ADB + Modem
If the above asks for MSL or doesn’t work then try:
Developer Settings > USB Configuration > RNDIS (USB Ethernet) then we can get MSL to enable the above if you need MSL
For those that don't know... the 5th to last digit in the firmware is the BOOTLOADER (BL) version. YOU CAN'T GO BACK!!
i.e G920TUVU5EQC2 the BL version is 5 so you can't flash anything less than BL version 5
PC
You will need a Windows PC for the software. Please ensure you have Windows 7 or newer
Windows Vista and XP are NOT RECOMMENDED (for anything lol).
Please download FlexiHub http://www.eltima.com/wiki/user-guides/flexihub-windows/installation.html and install on your PC.
Please reboot after install.
Please create a FREE flexihub account here https://flexihub.eltima.com/user/registration/ AFTER ENTER DETAILS, YOU WILL SEE A PAYMENT PAGE... CLOSE WINDOW NOW. FREE ACCOUNT ALREADY CREATED
Or I have a few accounts if you wish to use one just let me know.
Please have FlexiHub open and logged in.
Unlocking Process
When you have contacted me and I have replied that we are ready you may proceed to:
Open flexihub and log in to your account
DO NOT SEND COM PORT. THIS IS USELESS TO ME ALONE
If needed click 'UNLOCK' on the phone's driver so it can be accessed (i.e Samsung_Android OR Gadget_Serial OR MSMxxxx)
Right click on your phone's driver in flexihub(i.e Samsung_Android OR Gadget_Serial OR MSMxxxx) and click send invite.
Type in [email protected] and click OK.
I will connect to the device and proceed from there.
Please watch phone for USB Authorization prompt.
Check the box then press OK.
I will disconnect and reconnect as required (using FlexiHub).
Watch phone Screen for SU (ROOT) prompt and press GRANT.
All you need to do is watch the phone for USB Authorization and ROOT grant.
Please follow the instructions I send via Google Hangouts
After we are finished you can return your device settings to as they were and you can remove FlexiHub from PC.
Please kindly donate via PayPal to [email protected] (once again 100% optional)
Hi friend ..im from mexico ..i need help for me please ..?
Sent from my SAMSUNG-SM-G920A using XDA-Developers Legacy app
Thanks you buddy !
You did it!
In 5 minutes you unlocked my sprint galaxy s6 edge with firmware PJ1 6.0.1 October Security patch!
Edit:
I just update to nougat and everything is yet ok!
I am using a sim in europe!
Thanks again!
searius said:
Thanks you buddy !
You did it!
In 5 minutes you unlocked my sprint galaxy s6 edge with firmware PJ1 6.0.1 October Security patch!
Edit:
I just update to nougat and everything is yet ok!
I am using a sim in europe!
Thanks again!
Click to expand...
Click to collapse
Thanks for the feedback, greatly appreciated. Did you use the poll too?
stifilz said:
Thanks for the feedback, greatly appreciated. Did you use the poll too?
Click to expand...
Click to collapse
Yes of course.
searius said:
Thanks you buddy !
You did it!
In 5 minutes you unlocked my sprint galaxy s6 edge with firmware PJ1 6.0.1 October Security patch!
Edit:
I just update to nougat and everything is yet ok!
I am using a sim in europe!
Thanks again!
Click to expand...
Click to collapse
Hi friend can you help me to free my cell .. please ....
Sent from my SM-G930T using XDA-Developers Legacy app
mataflakitas said:
Hi friend can you help me to free my cell .. please ....
Sent from my SM-G930T using XDA-Developers Legacy app
Click to expand...
Click to collapse
Its not me buddy is stifilz that is doing the magic
I am very grateful to my brother stifilz , thank you very much..??
Sent from my SM-G920T using XDA-Developers Legacy app
Can you unlock the tmobile S7 edge running nougat?
_PaPaUpA_ said:
Can you unlock the tmobile S7 edge running nougat?
Click to expand...
Click to collapse
Please read the first lines of this page. No
Hello!
And doing this is a permanent release or something happens if I am released in mm 6.0 but if I update it to nougat 7.0 I would lose the release someone explain me
howdy, was wondering something. I am running custom rom DaMu Z version 3. It is T920 running MM 6.0.1. Is this capable of unlocking? If so I would definitely like to do it, since I havent used this phone in so long, would love to go back to it. Thanks!!
Edit: So about to update to DaMu Z ver 5, current firmware is G920TUVU5EPK5, hope this helps, for Im not completely sure what Im doing.
Thanks Bro, I appreciate this.
Thanks again for the help.
Aw, s7 tmobile not available ?
Can u help unlocking my sm g920t ?
xtacks said:
Can u help unlocking my sm g920t ?
Click to expand...
Click to collapse
Yeah. Please follow the first post
Hey I sent you message via hangouts about unlocking N920T, G920P, G928P
How to downgrade from 7 to 6 so do not need root?
stifilz said:
Yeah. Please follow the first post
Click to expand...
Click to collapse
Hi, can you unlock Galaxy S6 SM-G920R7 (C-Spire)?
I've just bought this phone, I have a SIM that does support WiFi calling and VoLTE (it's EE in UK), but I don't see the option anywhere. Similarly I don't see a VoLTE option. I've been everywhere in the menus, and it's just not there, or in the phone app.
Is there some magic code I can type in to force it on, like *#*#86583#*#* on a Xiaomi ?
Do either of these work OK for anyone ?
I have version 17.0922.2005.11
I found the answer, and if someone else is looking, Asus needs to add your carrier / country VOLTE/VOWIFI profiles to their firmware.
I guess I have to wait.
lordxenu said:
I found the answer, and if someone else is looking, Asus needs to add your carrier / country VOLTE/VOWIFI profiles to their firmware.
I guess I have to wait.
Click to expand...
Click to collapse
Your carrier/counrty COULD be in there already. Prop edits might be necessary. I posted a thread a few days ago, but deleted it, because the thread got spammed.
bs3pro said:
Your carrier/counrty COULD be in there already. Prop edits might be necessary. I posted a thread a few days ago, but deleted it, because the thread got spammed.
Click to expand...
Click to collapse
can we possibly convince you to share the info again ( read the thread, and yeah, seems people either are clueless or want everything 5G .. aparently they dont get the dofference between network limitations and phone limitations or something :/ ) just got the ROG3 yesterday, but living in a low coverage area, im more or less depending on VoWIFI most of the time, so would be great to have the phone actually working as intended instead of mostly handheld console XD ..
thank you
bs3pro said:
Your carrier/counrty COULD be in there already. Prop edits might be necessary. I posted a thread a few days ago, but deleted it, because the thread got spammed.
Click to expand...
Click to collapse
Please if you have a solution help us
@bs3pro
Can you share this information please? Do you need root? Mind PMing it to me if possible if anything..
bs3pro said:
Your carrier/counrty COULD be in there already. Prop edits might be necessary. I posted a thread a few days ago, but deleted it, because the thread got spammed.
Click to expand...
Click to collapse
Any chance you can share it here mate. It would be of great help to everyone. There are stupids everywhere, please donot hesitate to share the info because of those self entitled pricks.
Thanks mate.
bindassever said:
Any chance you can share it here mate. It would be of great help to everyone. There are stupids everywhere, please donot hesitate to share the info because of those self entitled pricks.
Thanks mate.
Click to expand...
Click to collapse
Hi Guys,
Just finished adding some hours ago all what is needed to enable it for my ROG 3 and my carrier.
[Guide] Enabling VoLTE/VoWiFi v2 | XDA Developers Forums
I have rooted the phone...
1) download the bootloader unlock from asus support webpage and unlock the bootloader (!!!this wipes your phone!!!)...just select the model and they give you the apk.
2) download twrp custom rom and flash it in fastboot (you need drivers and fasbtoot tool)
3) install magisk apk and use the app to download the proper zip that has to be flashed via custom recovery to enable root
4) having root enabled now you can use the guide above and activate diagnostics (I had to use the remote port option as it would not detect it via USB
5) based on the guide I also used the Xiaomi mi9 mbns (sort of config files for volte and vofi) using my carrier file.
Rebooted and all works now
PS: I had to enable magisk hiding mechanisms to make sure banking apps are working also.
While at this I also added some ad blocking capabilities now that I had to have root
PPS: here is a guide for rooting....(https://www.ytechb.com/how-to-install-xposed-framework-on-android-10/)
for custom recovery (https://dl.twrp.me/I003D/twrp-3.5.0_10-0-I003D.img.html)
With the new update to a12, here in USA a lot of users can make or receive any phone call. with the A11 not issues. Any idea how we can fix this issue ? My phone is not rooted.