Bionic Activation - Motorola Droid Bionic

Got Droid Bionic 5.9.905 followed the instructions found on here to get it to pageplus, everything goes fine till the "activation" i get unknown sim card, can't find where to enter the 14 digits etc i am on pageplus already, my number shows up in cdma workshop etc
after getting things going want to flash custom rom, say eclipse or whatever rom is recommended
thanks for any help
mrbeav

mrbeav said:
Got Droid Bionic 5.9.905 followed the instructions found on here to get it to pageplus, everything goes fine till the "activation" i get unknown sim card, can't find where to enter the 14 digits etc i am on pageplus already, my number shows up in cdma workshop etc
after getting things going want to flash custom rom, say eclipse or whatever rom is recommended
thanks for any help
mrbeav
Click to expand...
Click to collapse
You can bypass the activation
Read:
http://androidforums.com/motorola-droid-bionic/410949-bypass-activation.html

ref: safe mode
ekramsam said:
You can bypass the activation
ok tried that, same result, i'm not doing something right then in cdma ws
maybe apns, etc. one post says about enter one digit less than 15
i've found a couple other tutorials for loading the pageplus
i'll keep at it till i get it,
appreciate the suggestion and reply
sincerely mrbeav
like to get past the emergency only screen...
figured it out tapping the screen edges 4 taps one each corner left right bottom right bottom left
Click to expand...
Click to collapse

if you need to "redo the activation after you install the update" (as per the helpful steps found elsewhere here), does that means all the phone activation steps or does it mean the pageplus activation itself (or both)?
I updated to 905 and lost all service. stock bionic.

I'm trying to get my bionic working on page plus with ICS. So far i've found a guide on the howardforums, but it's not exactly noob friendly, keep getting stuck. Anyone know of a better guide anywhere?

TruthTaco said:
I'm trying to get my bionic working on page plus with ICS. So far i've found a guide on the howardforums, but it's not exactly noob friendly, keep getting stuck. Anyone know of a better guide anywhere?
Click to expand...
Click to collapse
follow this guys posts:
http://forum.xda-developers.com/search.php?searchid=83765141

Related

How to Bypass T-Mobile Google Setup screen??

Hi All,
Having trouble with my G1 (see my post below). The only remedy I see is to get past the opening tmobile Google sign up and get to the real home screen. From there...
I tried to do it through wifi but I don't have an att data plan or an unlocking code for my ATT SIM. (I did put ATT APN settings)
THoughts appreciated?
Regards, PK
BTW, why are my posts not in bold?
Your posts are not in bold until you have new reply to it.
Why would you need att plan to use your wi-fi? That part I don't get but neverless
You will need to get that unlock code to use your att sim card, there's no way around it, period.
If you want to use your phone on wi-fi with no sim card and you have root access then you can just go to this thread and follow the directions. If you don't have root access then then you need to downgrade to RC29 (using DREAIMG.nbh) and then follow the info in this thread. After it's all said and done you can either wait for OTA of the official 1.6 Donut or you can root and install the rom of your choice.
Good luck
very good, Thanks,
I did a successfully flash (I believe, sorta,... "bla, bla installation succesfull") with R29 DREAIMG.nbh from unlockr" .com" I say I believe because the only way I can tell is I can type in return, reboot,return and it reboots +it's a whole new opening screen with the Google runaround . The iffy part of "sorta...sucsesfull" of the flash is, I no longer have any access to any SD card and no ability to sync with PC.
As to unlocking the SIM card, no doubt, It will have to be done. Of the some 25 odd android websites I've been pouring over, theres no definitive statements as to just when in the process it should be done. I also don't know which of these guys are reputable Given my track record of half bricking this thing with my first flash, I'm going forward with a good dose of timidity. I'll take your comment as a go.
As far as wifi Google registration with out SIM card, I appreciate the link. I'll have to study it more but, I can't link to to my P.C. right now. I futzed with everything & follow instructions & prescriptions from everywhere for everything: adb, loaded new usb drivers, HTC drivers, android SDK-3, HTC sync (with supposedly corrected vista HTC drivers), Droid explorer, etc all day till 2 in the morning and the phone just isn't "taking calls", (or Sd's for that matter). But I'll keep trying.
Anyway thanks again for the straightening me out and the links.
Regards, PK
P.S. You can safely assume I tried everything every-which- way to get it to read SD's, that rebooting PC and the phone reformatting SD's, trying different capacities, buying another virgin card, popping the battery in and out,,, all a zillion times. Same goes for syncing. NADA.
thanks for ur information

[Q] new D3 user

Hi,
i recently bought a new droid 3 from verizon i already sim unlocked it because i live in Europe.
but i'm totally new to the android system but i do know some things about it but is there a guide to help me started rooting and flashing?
or could someone tell me the basics in a nutshell?
my previous phone was a WinMo based phone and all you needed was sspl and you could flash custom roms.
how is it done for android? and what does it mean with fastboot, root? (i asume it is something like linux to be root user?) safeboot? bootstrap? and what is CM7 or CM9
P.S. i study electronics-informatics so you don't need to tell me what linux or windows is
thnx in advance
Can you tell me how you unlocked your phone???
To root
http://forum.xda-developers.com/showthread.php?t=1240130
To flash ROMs install Safestrap from here
http://hash-of-codes.blogspot.com/p/android-downloads.html
Go to the android development section to find ROMs.
Liberty, ICS/CM9, MavRom, and SteelDroid are the most popular. Im using mavrom with ICS currently.
I definitely recommend looking into CM9. I just did a bunch of Googling on it today for my D3.
Now I'm running Ice Cream Sandwich and loving it. It's early yet and it has it's quirks, but overall I think it was worth it.
Dri94 said:
Can you tell me how you unlocked your phone???
Click to expand...
Click to collapse
euhm i sim unlocked my phone using this website unlock4moto.com/order_code/Motorola/Droid_3/any_Motorola/
(put http in before the link) xda wont let me post hyperlinks yet
you only need to give the IMEI number you can find here:
At the Home screen, press Menu
Tap Settings
Scroll down and tap "About phone"
Tap Status
Scroll down the screen and the IMEI # will be listed there
it worked for me and i got the sim unlock code emailed to me within 30 mins (look in you spam folder too)
P.S. thnx for the info
Downtown Dan said:
I definitely recommend looking into CM9. I just did a bunch of Googling on it today for my D3.
Now I'm running Ice Cream Sandwich and loving it. It's early yet and it has it's quirks, but overall I think it was worth it.
Click to expand...
Click to collapse
ooh but is there a way to brick the phone? cause it would be darn stupid to brick my 3 day old phone and send it back to america for repairs.
so just root the phone and install safestrap? no worries of bricking the phone? and are there other methods besides safestrap?
if yes what are the differences?
it all looks SO easy to flash roms for android ( in WinMo it was always wait and see) but then again it was Microsoft...
There is always a chance of bricking your phone but fortunately perma-bricking your phone while trying to flash new roms or using safestrap is almost impossible since you can still enter fastboot (m+powerup) from where you can install the stock sbf/rom
You can also flash using the 'old' bootstrap which basically removes your stock rom and flahes the new one.
Safestrap backs-up your old rom so you can try out another rom in another system/partition. Almost dualboot like except you can't reflash the original rom (yet)
Sry no links i'm on my droid3
"Almost dualboot like except you can't reflash the original rom" hey double, what do you mean by this. If you toggle safe system you can use your original ROM again. although i think im understanding wrong lol
Dri94 said:
"Almost dualboot like except you can't reflash the original rom" hey double, what do you mean by this. If you toggle safe system you can use your original ROM again. although i think im understanding wrong lol
Click to expand...
Click to collapse
You're right but you can't reflash your original rom (non-safe). E.g. i have mavrom as nonsafe/original and ics has safe..now if an update comes for mavrom i can't update it without uninstalling safestrap and going back to bootstrap
Oh I understand you now. And we got the same setup aha.
Sent from ICS Droid3 using xda premium
snakebomber said:
euhm i sim unlocked my phone using this website unlock4moto.com/order_code/Motorola/Droid_3/any_Motorola/
(put http in before the link) xda wont let me post hyperlinks yet
you only need to give the IMEI number you can find here:
At the Home screen, press Menu
Tap Settings
Scroll down and tap "About phone"
Tap Status
Scroll down the screen and the IMEI # will be listed there
it worked for me and i got the sim unlock code emailed to me within 30 mins (look in you spam folder too)
P.S. thnx for the info
Click to expand...
Click to collapse
Hello, Today I tried to unlock my droid 3 on the website that you share with us no luck for me.
I received an Email from them:
Hello
For IMEI number of the order, unfortunately, there is no code in database.
xxxxxxxxxxxxxxx
Please verifity given IMEI number.
If the IMEI is correct, we will propose an alternative solution.
Yours
unlock4moto
but when I dial *#06# it display MEID HEX
A00000xxxxxxxx i think this is the ESN
DEC
273045896523648364 is this the IMEI Number??
I tried to send the 18 numbers but on the website will not let me put more than 15.
Ed27 said:
Hello, Today I tried to unlock my droid 3 on the website that you share with us no luck for me.
I received an Email from them:
Hello
For IMEI number of the order, unfortunately, there is no code in database.
xxxxxxxxxxxxxxx
Please verifity given IMEI number.
If the IMEI is correct, we will propose an alternative solution.
Yours
unlock4moto
but when I dial *#06# it display MEID HEX
A00000xxxxxxxx i think this is the ESN
DEC
273045896523648364 is this the IMEI Number??
I tried to send the 18 numbers but on the website will not let me put more than 15.
Click to expand...
Click to collapse
of what i read is that the MEID is a kind of IMEI number but because there are so many phones with an IMEI number that they needed something new but the unlock is (according what i found on google) always done with the IMEI number.
to what carrier is your phone locked to? and what is the exact type of your phone XT860 XT862? (you can find this in the "about" menu under settings.
maybe it is because my phone was brand new and never used.So it was never activated on the verizon network.
and i don't know if this has anything to do with it but on the box it says that the phone is "global ready".(I personally think it has nothing to do with that because if the phone is quadband it is ALWAYS global ready, if ofcourse the phone is not locked to verizon or some other carrier)
i have an alternative website but it is more expensive i thought it was 23 dollars or so. it first checks if they have an unlock code (never used the site but it looks promising)
sim-unlock.net/sim-lock/75/Unlock_for_any_New_Motorola_Defy_Flipout_Milestone/ (again put the http in front of it)
i hope this helps

[Q] Need Help Flashing a Spring HTC One back to Sprint

I picked up an Sprint HTC One that had been flashed to NTelos (East coast carrier) and would like to flash it back to Sprint. I called Sprint and they verified that the IMEI # was clean and could be activated back onto sprint. Honestly I am not looking to activate the phone on sprint but temporarily to T-Mobile and shortly to a UK Cellular company. We are only in the US for another 12 days and I think that having the phone on Ntelos will potentially mess up the global capabilities of this phone. Any help will be greatly appreciated.
Thanks in advance,
Matt
bigmatt00 said:
I picked up an Sprint HTC One that had been flashed to NTelos (East coast carrier) and would like to flash it back to Sprint. I called Sprint and they verified that the IMEI # was clean and could be activated back onto sprint. Honestly I am not looking to activate the phone on sprint but temporarily to T-Mobile and shortly to a UK Cellular company. We are only in the US for another 12 days and I think that having the phone on Ntelos will potentially mess up the global capabilities of this phone. Any help will be greatly appreciated.
Thanks in advance,
Matt
Click to expand...
Click to collapse
Get root then sim unlock the device. It wont screw up anything. (If you want to sim unlock, there is a guide in general.)
Indirect said:
Get root then sim unlock the device. It wont screw up anything. (If you want to sim unlock, there is a guide in general.)
Click to expand...
Click to collapse
a
Thanks for the info but I have been trying to get root access and it won't let me get past the recovery area. When I choose recovery it doesn't allow me to choose to install any thing, when I choose recovery it immediately does a restart with the red triangle. Please forgive me if I am missing something simple, I am still very much a noob but know just enough to get me in trouble. Thanks for the info.
bigmatt00 said:
a
Thanks for the info but I have been trying to get root access and it won't let me get past the recovery area. When I choose recovery it doesn't allow me to choose to install any thing, when I choose recovery it immediately does a restart with the red triangle. Please forgive me if I am missing something simple, I am still very much a noob but know just enough to get me in trouble. Thanks for the info.
Click to expand...
Click to collapse
You need s-off. If you want I'll do it for you out of boredom. Message me with teamviewer ID/password
http://teamviewer.com/download
It's very easy to flash back to sprint, all you really need to do is , flash a sprint prl then do ##786# then hit reset and should be good
Sent from my HTCONE using Tapatalk 4 Beta

[Q] Fully Stock HTC One M7

So I have a fully stock HTC One and have spent all night trying to unlock the bootloader. Nothing seems to work I have never rooted this phone, everything I have read makes it seem as if it's impossible. I've tried the adb/fastboot, htcdev, and changing CID methods. Plus I have read of various other ways that already require a root. Which I cannot do seeing how I am still locked and S-ON.
To be honest I'm at the edge and I think I'm just going to give up. I'm on 4.2.2 - hboot 1.54. I was a previous owner of the Thunderbolt which was not a bad phone, I rooted that and everything no questions asked. Although I do remember HTC taking the longest for OTA updates, not a huge fan of HTC.
If anyone has any suggestions on how to unlock the bootloader I will be fine from there. I'm positive I have all the right equipment and prerequisites just not sure if I really am at the end of the road.
Anything useful goes a long way right now.
Thanks.....
xxshererxx said:
So I have a fully stock HTC One and have spent all night trying to unlock the bootloader. Nothing seems to work I have never rooted this phone, everything I have read makes it seem as if it's impossible. I've tried the adb/fastboot, htcdev, and changing CID methods. Plus I have read of various other ways that already require a root. Which I cannot do seeing how I am still locked and S-ON.
To be honest I'm at the edge and I think I'm just going to give up. I'm on 4.2.2 - hboot 1.54. I was a previous owner of the Thunderbolt which was not a bad phone, I rooted that and everything no questions asked. Although I do remember HTC taking the longest for OTA updates, not a huge fan of HTC.
If anyone has any suggestions on how to unlock the bootloader I will be fine from there. I'm positive I have all the right equipment and prerequisites just not sure if I really am at the end of the road.
Anything useful goes a long way right now.
Thanks.....
Click to expand...
Click to collapse
what exactly is happening when you try and unlock the bootloader?
xxshererxx said:
So I have a fully stock HTC One and have spent all night trying to unlock the bootloader. Nothing seems to work I have never rooted this phone, everything I have read makes it seem as if it's impossible. I've tried the adb/fastboot, htcdev, and changing CID methods. Plus I have read of various other ways that already require a root. Which I cannot do seeing how I am still locked and S-ON.
To be honest I'm at the edge and I think I'm just going to give up. I'm on 4.2.2 - hboot 1.54. I was a previous owner of the Thunderbolt which was not a bad phone, I rooted that and everything no questions asked. Although I do remember HTC taking the longest for OTA updates, not a huge fan of HTC.
If anyone has any suggestions on how to unlock the bootloader I will be fine from there. I'm positive I have all the right equipment and prerequisites just not sure if I really am at the end of the road.
Anything useful goes a long way right now.
Thanks.....
Click to expand...
Click to collapse
Is urs the AT&T One? Then the bootloader unlock process is different. If urs is the standard international SIM unlocked, then ideally you should see a splash after you run the bootloader unlock command, which prompts you to unlock the bootloader. Please state what exactly ur issue is when u try to bootloader unlock
I'm with Verizon but it just gives me a 1 line error message doesn't run through anything else or load up anything. I type in "bootloader oem unlock" or whatever after clearly identifying my device is connected with "adb device" and nothing happens. It takes about 0.14 sec and says something along the lines of "[ERRORR] ......" after running again it takes 0.00 sec and says same thing, I can screenshot if you think it would be more helpful.
Please help, I appreciate both responses. Just really want this to work.
xxshererxx said:
I'm with Verizon but it just gives me a 1 line error message doesn't run through anything else or load up anything. I type in "bootloader oem unlock" or whatever after clearly identifying my device is connected with "adb device" and nothing happens. It takes about 0.14 sec and says something along the lines of "[ERRORR] ......" after running again it takes 0.00 sec and says same thing, I can screenshot if you think it would be more helpful.
Please help, I appreciate both responses. Just really want this to work.
Click to expand...
Click to collapse
Hahahaha Verizon is REALLY REALLY BAD when it comes to dev. support. Ideally, you shouldn't be posting this in this forum. Post it on the Verizon forum. But, I can help you.
http://rumrunner.us/downloads-2/
Download the package. Extract the zip and run the 'soju.exe' program. Please read ALL the pre-requisites mentioned in the instructions tab.
P.S. From next time if you're asking for help, please state that you're on Verizon
raghav kapur said:
Hahahaha Verizon is REALLY REALLY BAD when it comes to dev. support. Ideally, you shouldn't be posting this in this forum. Post it on the Verizon forum. But, I can help you.
Download the package. Extract the zip and run the 'soju.exe' program. Please read ALL the pre-requisites mentioned in the instructions tab.
P.S. From next time if you're asking for help, please state that you're on Verizon
Click to expand...
Click to collapse
Worked like a charm, but now I am having trouble with the recovery portion of all this.
I have downloaded and installed the TWRP Manager app and then went to install the recovery and it said my device is not supported, this same problem happened with CWMR.
xxshererxx said:
Worked like a charm, but now I am having trouble with the recovery portion of all this.
I have downloaded and installed the TWRP Manager app and then went to install the recovery and it said my device is not supported, this same problem happened with CWMR.
Click to expand...
Click to collapse
I think you'll find more help here: http://forum.xda-developers.com/verizon-htc-one

Problems with new Droid Turbo in UK - help needed please

Hi
Newbie here
I bought a new 'unlocked' Droid Turbo from a Chinese ebay seller with good feedback.
When I set it up it seemed ok, and picked up a 3G signal on my UK carrier network (no 4G LTE here).
The signal seemed weaker than my existing (old) device, so I went into settings and tried a few changes (from Global to the other options etc)
The signal didn't seem to improve, so after a bit of Googling I downloaded an app called Network and tried a few setting changes,
Anyway, you guessed it I can't get a signal at all now, even after a factory reset
Can anyone offer me any simple help as to what I should do?
Is it useless now?
Thanks in advance
monkey-prince said:
Hi
Newbie here
I bought a new 'unlocked' Droid Turbo from a Chinese ebay seller with good feedback.
When I set it up it seemed ok, and picked up a 3G signal on my UK carrier network (no 4G LTE here).
The signal seemed weaker than my existing (old) device, so I went into settings and tried a few changes (from Global to the other options etc)
The signal didn't seem to improve, so after a bit of Googling I downloaded an app called Network and tried a few setting changes,
Anyway, you guessed it I can't get a signal at all now, even after a factory reset
Can anyone offer me any simple help as to what I should do?
Is it useless now?
Thanks in advance
Click to expand...
Click to collapse
If that app made any changes to the system partition (the OS, basically), a factory reset will not fix it. If you want to get the stock, unmodified software back on it, you can try following section 0, steps 4-13 of this guide: http://forum.xda-developers.com/droid-turbo/general/guide-how-to-unlock-bootloader-install-t3292684.
TheSt33v said:
If that app made any changes to the system partition (the OS, basically), a factory reset will not fix it. If you want to get the stock, unmodified software back on it, you can try following section 0, steps 4-13 of this guide: http://forum.xda-developers.com/droid-turbo/general/guide-how-to-unlock-bootloader-install-t3292684.
Click to expand...
Click to collapse
Thanks for the help, I'm downloading them now. Is it a relatively risk-free process, if I follow the instructions to the letter?
monkey-prince said:
Thanks for the help, I'm downloading them now. Is it a relatively risk-free process, if I follow the instructions to the letter?
Click to expand...
Click to collapse
Yes. If you want to make the process even more automated, you could install the Verizon Upgrade Assistant (that annoying popup you get every time you plug your phone into a computer) and select the "repair" option. That will do the same thing as this.
TheSt33v said:
Yes. If you want to make the process even more automated, you could install the Verizon Upgrade Assistant (that annoying popup you get every time you plug your phone into a computer) and select the "repair" option. That will do the same thing as this.
Click to expand...
Click to collapse
Many thanks for the super quick and helpful reply, I'll report back when I'm done in case it's of use to others
TheSt33v said:
Yes. If you want to make the process even more automated, you could install the Verizon Upgrade Assistant (that annoying popup you get every time you plug your phone into a computer) and select the "repair" option. That will do the same thing as this.
Click to expand...
Click to collapse
I tried to install the upgrade assistant, and it seemed to install ok, but there's no icon on the desktop or anything under apps (windows 10)
It does appear in the uninstall programs page in settings though.
I then tried the first method, but couldn't extract directly to the folder (error message came up) so I extracted to a folder on the desktop then dragged the contents into the correct folder and double clicked the batch file.
The phone is now showing the battery level, and the command box on the laptop screen is showing 'waiting for device'
Am I on the right tracks, or am I making newbie errors and I should get back in my lane?
Following the steps (as you suggested) has worked perfectly - thanks again.
I appreciate the ultra quick help from across the pond
monkey-prince said:
Following the steps (as you suggested) has worked perfectly - thanks again.
I appreciate the ultra quick help from across the pond
Click to expand...
Click to collapse
Happy to help! God save the queen, and all that.

Categories

Resources