Related
Hi,
I was on Rocket Rom V23 and updated to ROCKET ROM - v1 - ICS - XXLPY by following the instructions from portion a) in the post http://forum.xda-developers.com/showthread.php?t=1654838
update was successful but the phone works for 2 mins and then goes to black screen with ''kernel panic upload mode''
i went through lots of post & tried to load stock GB Rom via Odin by when i connect the usb cable its not recognized by Odin.
how can i fix this problem?
Install kies or something to make sure u have all the needed drivers maybe
Are you putting your phone in download mode before connecting the usb cable to the pc and run odin?
@Elusivo: i have the drivers for it as i used the same laptop to do the root
@pakalrtb: yes, im putting the phone in download mode before connecting the usb cable to the pc and running odin as per dr.ketan thread on how to install N7000 stock roms.
do you guys advise me to install stock GB or stock ICS as now rocket rom ICS is installed?
also am i doing the right thing by installing the stock rom to resolve this issue?
I managed to install GB stock rom KK2.
now on the setup page where it asks to press the android to start i keep getting the force close error and cant proceed further.
what should i do?
osam87 said:
I managed to install GB stock rom KK2.
now on the setup page where it asks to press the android to start i keep getting the force close error and cant proceed further.
what should i do?
Click to expand...
Click to collapse
if you are sure to be on GB kernel then
reboot into recovery and wipe , and pray....
@friedje : i reeboted into and tried to do full wipe but its asking me to confirm password which i don't know.
osam87 said:
@friedje : i reeboted into and tried to do full wipe but its asking me to confirm password which i don't know.
Click to expand...
Click to collapse
is that in Recovery Mode, Normal Mode or PC Utility??
antiguangenius said:
is that in Recovery Mode, Normal Mode or PC Utility??
Click to expand...
Click to collapse
Recovery mode
osam87 said:
@friedje : i reeboted into and tried to do full wipe but its asking me to confirm password which i don't know.
Click to expand...
Click to collapse
Only do a cache and dalvik wipe. If that fails, install abyss42 and do your wipe from there. If that still fails, flash another stock GB.
Zapped through server hops to XDA forums
I had mine asking for password which was my 4 digit unlock key that I used for screen unlock, might be assigned to Sim unlock as well.
Sent from my GT-N7000 using xda premium
just to update, i flashed ICS LPY and did wipe cache and full wipe.
all is working fine now.
osam87 said:
just to update, i flashed ICS LPY and did wipe cache and full wipe.
all is working fine now.
Click to expand...
Click to collapse
You're lucky your phone's still alive! Wiping in LPY kernel causes superbrick!!
Sent from my GT-N7000 using XDA
Hi all, i think i make a big mistake. I installed this ROM, but i think i totaly messed it up. I have a I9001 ( Galaxy S Plus ), i used the normal recovery, so i don't used Recovery clockwork, ICS AOKP work's fine, but i cant get Gapps installed, the Google Play app doesn't appear, when i try to install it manually (APK), Google Play automaticly crashes at start up, and it's the latest Google Play version, can PLEASE someone help me and tell me what is the best to do? Back to STOCK ROM is also not working
Why can't you flash Gapps?
Sent from my i9000 via xda app; JRO03L ROM w/ Devil kernel & JVU
davedavy said:
Hi all, i think i make a big mistake. I installed this ROM, but i think i totaly messed it up. I have a I9100, i used the normal recovery, so i don't used Recovery clockwork, ICS AOKP work's fine, but i cant get Gapps installed, the Google Play app doesn't appear, when i try to install it manually (APK), Google Play automaticly crashes at start up, and it's the latest Google Play version, can PLEASE someone help me and tell me what is the best to do? Back to STOCK ROM is also not working
Click to expand...
Click to collapse
IF you are using i9100, than you are in the wrong forum. this is i9000 forum.
But you can try settings\apps\downloaded\google play store and press clear data and uninstall updates
davedavy said:
Hi all, i think i make a big mistake. I installed this ROM, but i think i totaly messed it up. I have a I9100, i used the normal recovery, so i don't used Recovery clockwork, ICS AOKP work's fine, but i cant get Gapps installed, the Google Play app doesn't appear, when i try to install it manually (APK), Google Play automaticly crashes at start up, and it's the latest Google Play version, can PLEASE someone help me and tell me what is the best to do? Back to STOCK ROM is also not working
Click to expand...
Click to collapse
Please DO NOT use roms which are not meant for your phone. If you have flashed i9000 rom on your i9100 (I dont know whether your phone will even start if you've done this), please reflash the stock rom of your i9000.
joel2709 said:
Please DO NOT use roms which are not meant for your phone. If you have flashed i9000 rom on your i9100 (I dont know whether your phone will even start if you've done this), please reflash the stock rom of your i9000.
Click to expand...
Click to collapse
I have a I9001, not a I9100, my fault
xsenman said:
IF you are using i9100, than you are in the wrong forum. this is i9000 forum.
But you can try settings\apps\downloaded\google play store and press clear data and uninstall updates
Click to expand...
Click to collapse
I've made a mistake, i mean the Galaxy S Plus i9001!
OhMrBigshot said:
Why can't you flash Gapps?
Sent from my i9000 via xda app; JRO03L ROM w/ Devil kernel & JVU
Click to expand...
Click to collapse
I can, but it doesn't affect anything.
This is the right forum for i9001 questions . How did you try to install the gapps? Did you boot into recovery using reboot->recovery or three-button-combo, or did you try it via ROM manager somehow?
dark_knight35 said:
This is the right forum for i9001 questions . How did you try to install the gapps? Did you boot into recovery using reboot->recovery or three-button-combo, or did you try it via ROM manager somehow?
Click to expand...
Click to collapse
Well, in the ROM thread i downloaded 2 file's: ROM.zip and GAPPS.zip, i shat down my phone and clicked at the POWER and Volume UP key and entered the recovery mode. I wiped cache, then i wiped data and installed the ROM.zip from SD card and GAPPS.zip from SD card, well, the ROM was working fine but Gapps doesn't seem to appear. When i installed Gapps again this also didn't had any consequences.
After I upgraded from Froyo to GB 2.3.6 via Kies, the screen take about 2 sec to turn on while it take instantly to turn off.
erik8xda said:
After I upgraded from Froyo to GB 2.3.6 via Kies, the screen take about 2 sec to turn on while it take instantly to turn off.
Click to expand...
Click to collapse
You can try to wipe data/factory reset and wipe cache partition via Stock recovery (you will lose all your data apps, sms, phones, notes etc, if you don't backup it first) but It could work
Maybe froyo's old files are interfering with the new ones
Viper The Ripper said:
You can try to wipe data/factory reset and wipe cache partition via Stock recovery (you will lose all your data apps, sms, phones, notes etc, if you don't backup it first) but It could work
Maybe froyo's old files are interfering with the new ones
Click to expand...
Click to collapse
I got used factory data reset and formatted SD card from the phone itself before after I updated to GB 2.3.6. Is it better to use Stock recovery instead the phone itself? Is it enter Stock recovery by press Home and Power buttons when the phone off?
erik8xda said:
I got used factory data reset and formatted SD card from the phone itself before after I updated to GB 2.3.6. Is it better to use Stock recovery instead the phone itself? Is it enter Stock recovery by press Home and Power buttons when the phone off?
Click to expand...
Click to collapse
Well, I prefer to use recovery, It's faster and you can wipe cache partition
Yes, when shut down your phone and push Home + Power until recovery mode boots
Viper The Ripper said:
Well, I prefer to use recovery, It's faster and you can wipe cache partition
Yes, when shut down your phone and push Home + Power until recovery mode boots
Click to expand...
Click to collapse
It still the same after I did what you said.
erik8xda said:
It still the same after I did what you said.
Click to expand...
Click to collapse
well, you can try flashing a fresh stock via Odin too
Viper The Ripper said:
well, you can try flashing a fresh stock via Odin too
Click to expand...
Click to collapse
Can you teach me how to do it, please?
erik8xda said:
Can you teach me how to do it, please?
Click to expand...
Click to collapse
All you need is here http://forum.xda-developers.com/showthread.php?p=12874680 if you have GT-S5830 model
You will find official firmwares in sammobile.com , you need to create an account in order to download firmwares
You should have a look at this too It will be really useful for you
http://forum.xda-developers.com/showthread.php?t=2185700
Viper The Ripper said:
All you need is here http://forum.xda-developers.com/showthread.php?p=12874680 if you have GT-S5830 model
You will find official firmwares in sammobile.com , you need to create an account in order to download firmwares
You should have a look at this too It will be really useful for you
http://forum.xda-developers.com/showthread.php?t=2185700
Click to expand...
Click to collapse
I can't turn on the phone after I flashed to stock froyo 2.2.1 via odin. Did I damage the phone already?
WHAT?¿?
Didn't flash GB?¿ Well I don't know about froyo I didn't try it (but think to go back to froyo It's possibe :S), Can you boot into recovery/download mode¿? First of all try to do wipe factory reset and cache partition after to flash the new rom, Maybe your device get a bootloop.
If it doesn't work try to flash again your phone with GINGERBREAD firmware
Viper The Ripper said:
WHAT?¿?
Didn't flash GB?¿ Well I don't know about froyo I didn't try it (but think to go back to froyo It's possibe :S), Can you boot into recovery/download mode¿? First of all try to do wipe factory reset and cache partition after to flash the new rom, Maybe your device get a bootloop.
If it doesn't work try to flash again your phone with GINGERBREAD firmware
Click to expand...
Click to collapse
I did flash GB 2.3.6 downloaded from Sammobile. I can't boot into those modes. I removed the battery for 30 mins and then I tried to boot into those modes but still can't. I think I destroyed my phone.
erik8xda said:
I did flash GB 2.3.6 downloaded from Sammobile. I can't boot into those modes. I removed the battery for 30 mins and then I tried to boot into those modes but still can't. I think I destroyed my phone.
Click to expand...
Click to collapse
Try it http://forum.xda-developers.com/showthread.php?t=1071970
Viper The Ripper said:
Try it http://forum.xda-developers.com/showthread.php?t=1071970
Click to expand...
Click to collapse
I tried the method from the thread but it didn't work. After I browsed the thread, I found out I should try Usb Jig. It helps me enter download mode after I plug it into my phone. For Froyo, I found out I shouldn't install one package instead install full package. Do you know where can I download the full package?
erik8xda said:
I tried the method from the thread but it didn't work. After I browsed the thread, I found out I should try Usb Jig. It helps me enter download mode after I plug it into my phone. For Froyo, I found out I shouldn't install one package instead install full package. Do you know where can I download the full package?
Click to expand...
Click to collapse
Sure, Russian firmware KPH and Germany KTE are full package, you can found it in sammobile
Viper The Ripper said:
Sure, Russian firmware KPH and Germany KTE are full package, you can found it in sammobile
Click to expand...
Click to collapse
Those codes are for GB right? What codes for Froyo to download?
erik8xda said:
Those codes are for GB right? What codes for Froyo to download?
Click to expand...
Click to collapse
You can try this:
JLC, JLD, KA9, KB1, KC1 from Russia
...I'm not sure if they are full package, anyway you can try donwloading it
Viper The Ripper said:
You can try this:
JLC, JLD, KA9, KB1, KC1 from Russia
...I'm not sure if they are full package, anyway you can try donwloading it
Click to expand...
Click to collapse
I tried USB Jig and it doesn't work. What should I do now?
Bump.
Many of us are facing this problem where after flashing a 10.2 ROM and rebooting, the device is stuck at boot screen- the Samsung N7000 screen!
This is a strange problem which seems to be affecting only some n7000 handsets as others can keep flashing the ROMs without any issues...wiping, reflashing ROM, etc doesn't work!
I myself faced this problem on almost all custom CM 10.2 Roms and am sharing the solution which worked for me. At the onset, this solution was suggested to me by another member @Super Prince in one of my posts and it worked!!
1. Reboot into recovery
2. Flash the correct gapps once again
3. Reboot
The problem should be gone now and no more stuck-iness for you...
Sent from my GT-N7000 using XDA Premium 4 mobile app
I tried that, and it did not work.
I'm not using the regular Gapps package, but this one:
http://forum.xda-developers.com/showthread.php?t=2012857
What package do you use?
knedge said:
Many of us are facing this problem where after flashing a 10.2 ROM and rebooting, the device is stuck at boot screen- the Samsung N7000 screen!
This is a strange problem which seems to be affecting only some n7000 handsets as others can keep flashing the ROMs without any issues...wiping, reflashing ROM, etc doesn't work!
I myself faced this problem on almost all custom CM 10.2 Roms and am sharing the solution which worked for me. At the onset, this solution was suggested to me by another member @Super Prince in one of my posts and it worked!!
1. Reboot into recovery
2. Flash the correct gapps once again
3. Reboot
The problem should be gone now and no more stuck-iness for you...
Sent from my GT-N7000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Really? I'll try it next time when I flash some CM based ROM and will get this problem.
I hope it is really the reason.
SirRhor said:
I tried that, and it did not work.
I'm not using the regular Gapps package, but this one:
http://forum.xda-developers.com/showthread.php?t=2012857
What package do you use?
Click to expand...
Click to collapse
Which CM version are you on? This method has worked for me every time on CM 10.2 roms and official CM 10.2 gapps (the one dated 13/08/2013)
I used to get stuck on the GT N7000 screen after every reboot and resorted to all sort of stuff like reflashing, formatting and stuff but to no avail.
The only solution that worked for me was re-flashing the gapps!
Maybe you should try once again with the official gapps..and post your results.
jakuburban said:
Really? I'll try it next time when I flash some CM based ROM and will get this problem.
I hope it is really the reason.
Click to expand...
Click to collapse
The 'Reason', my friend, remains a mystery...
This solution, though worked!
Experienced developers might like to comment on this as to what might be the reason
knedge said:
Which CM version are you on? This method has worked for me every time on CM 10.2 roms and official CM 10.2 gapps (the one dated 13/08/2013)
I used to get stuck on the GT N7000 screen after every reboot and resorted to all sort of stuff like reflashing, formatting and stuff but to no avail.
The only solution that worked for me was re-flashing the gapps!
Maybe you should try once again with the official gapps..and post your results.
Click to expand...
Click to collapse
I'm on Carbon, but I tried another CM based ROM as well and it did not work.
I will try it with the official Gapps and Slim Gapps then report back.
EDIT 1: Well. I tried the lastest Carbon nightly 10/17, with both Slim Gapps and normal regular Gapps and the same result, stuck on boot logo.
Both times I flashed a clean install. I'm out of options now.
EDIT 2: When I'm using a kernel from 4.3 and I'm on CWM trying to format Preload, I always get this message:
E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p12
Error formatting /preload
Could that be a possible reason?, does anyone else have that same message?
No suggestions?
Am I'm stuck on 4.2?
Sent from my GT-N7000
It's the same for all on the new Cwm. Preload cannot be formatted in Cwm 10.2.
What happens when you clean install a rom without gapps. And boot it.?
nokiamodeln91 said:
It's the same for all on the new Cwm. Preload cannot be formatted in Cwm 10.2.
What happens when you clean install a rom without gapps. And boot it.?
Click to expand...
Click to collapse
I tried that last night actually, clean flash and no Gapps and the same result, stuck on boot screen.
What I've tried so far:
- Flashing different 4.3 ROMs with three different Gapps combinations.
- Flashing Carbon with no Gapps.
Thank you in advance for any ideas you can provide.
I have never encountered such an issue after a clean flash ever. So not sure what's going on there.
When a clean install, do you format system, data and cache and then install the new rom?
nokiamodeln91 said:
I have never encountered such an issue after a clean flash ever. So not sure what's going on there.
When a clean install, do you format system, data and cache and then install the new rom?
Click to expand...
Click to collapse
Yeah, what I do is to do a factory reset twice, then clear cache, then preload twice, data once, system twice and dalvik twice, and only then I flash the ROM and then Gapps.
I let it settle for one hour and then I start the configuration.
It is weird, because if I leave it to boot up normally for the first time, without opening any apps or configurations, it reboots normally. And only when I open Settings or an app, and then I reboot the phone, it gets stuck on the boot logo.
I've even tried to format the SD Card and no difference.
tried without the external SD card inserted?
nokiamodeln91 said:
tried without the external SD card inserted?
Click to expand...
Click to collapse
No, gonna try that tonight.
EDIT 1: Tried lastest Carbon nightly with NO Gapps and no External SD Card. Same crap.
EDIT 2: I found this thread and it basically says that I have to flash Stock, then root it and then do a factory reset.
http://forum.xda-developers.com/showthread.php?t=2427569
Sent from my GT-N7000
SirRhor said:
No, gonna try that tonight.
EDIT 1: Tried lastest Carbon nightly with NO Gapps and no External SD Card. Same crap.
EDIT 2: I found this thread and it basically says that I have to flash Stock, then root it and then do a factory reset.
http://forum.xda-developers.com/showthread.php?t=2427569
Sent from my GT-N7000
Click to expand...
Click to collapse
@SirRhor Please try anothjer work-around before you do anything else:
1. Do all the wipes from a safe kernel
2. Flash Rom (only rom and no gapps)
3. Reboot the system without gapps
4. Now, reboot into recovery (I prefer to leave the system for 10-15 minutes to settle down before rebooting)
5. Flash the correct gapps
6. Reboot and set up ur google account etc.Restore apps or whatever u need from the play store. Dabble with rom settings
7. Reboot!
Did it work now?
knedge said:
@SirRhor Please try anothjer work-around before you do anything else:
1. Do all the wipes from a safe kernel
2. Flash Rom (only rom and no gapps)
3. Reboot the system without gapps
4. Now, reboot into recovery (I prefer to leave the system for 10-15 minutes to settle down before rebooting)
5. Flash the correct gapps
6. Reboot and set up ur google account etc.Restore apps or whatever u need from the play store. Dabble with rom settings
7. Reboot!
Did it work now?
Click to expand...
Click to collapse
I haven't tried that yet, I'll do it tomorrow, but I really doubt it's going to work. I think this whole problem it's caused by errors located on some blocks of memory.
Sent from my GT-N7000
SirRhor said:
I haven't tried that yet, I'll do it tomorrow, but I really doubt it's going to work. I think this whole problem it's caused by errors located on some blocks of memory.
Sent from my GT-N7000
Click to expand...
Click to collapse
Well, can be!
Much abused handset...and much loved too!
But do give it a try!
SirRhor said:
No, gonna try that tonight.
EDIT 1: Tried lastest Carbon nightly with NO Gapps and no External SD Card. Same crap.
EDIT 2: I found this thread and it basically says that I have to flash Stock, then root it and then do a factory reset.
http://forum.xda-developers.com/showthread.php?t=2427569
Sent from my GT-N7000
Click to expand...
Click to collapse
maybe your bootloader corrupted already. Reflash the bootloader only or whole stock rom using ODIN may help ..
I'm glad to inform you that I was able to solve my problem following this guide:
http://forum.xda-developers.com/showthread.php?t=2427569
But instead of flashing the Stock Rooted ROM using Odin, I just flashed it within Philz Recovery.
Right now I'm changing settings and restarting on Carbon 4.3, and so far I have not had any problems.
To anyone experiencing this, just read this thread so you will not waste your time trying ALL the bullcrap I did and instead just try the guide above.
Thank you for everyone who helped me out.
EDIT: Maybe the OP can change the title of this thread to "FIXED" or "SOLVED".
So...which Stock Rooted ROM using to flash?...
heihei123 said:
So...which Stock Rooted ROM using to flash?...
Click to expand...
Click to collapse
Actually, I found a better more permanent solution.
Follow this guide to check for errors on the different partitions:
http://forum.xda-developers.com/showthread.php?t=1396366
Let me know if it helps.
And to answer your question, I flashed a stock ROM from Hungary I think, no problems.
EDIT: Forgot to mention, instead of using the switches described on that guide, I used -f and -y at same time.
Sent from my GT-N7000
hey eveyone!
my device is galaxy s advance gt-i9070 on which i was using cutom rom aicp 3.5 nightly (4.4.2 kitkat) with minor bugs and cwm recovery 6.0.4.7
i decided to switch to paranoid android 3.69 for smoother perfomance but sadly i bricked my device. although i had backed up my rom using cwm recovery on sd card. but the most sad part is that even recovery is not working. it just reboots again and again. someone told me to flash stock firmware via odin as the download mode is working. but i am worried that my data will be lost. can anyone tell me my data will be lost or not????
and if it ll lost than any way to save it or recover it/ ? i had extremely precious data in it. but being careless i didnt backed my personal data in my laptop.. please help me guys.. ready to pay any cost for my data
shivamgaba22 said:
hey eveyone!
my device is galaxy s advance gt-i9070 on which i was using cutom rom aicp 3.5 nightly (4.4.2 kitkat) with minor bugs and cwm recovery 6.0.4.7
i decided to switch to paranoid android 3.69 for smoother perfomance but sadly i bricked my device. although i had backed up my rom using cwm recovery on sd card. but the most sad part is that even recovery is not working. it just reboots again and again. someone told me to flash stock firmware via odin as the download mode is working. but i am worried that my data will be lost. can anyone tell me my data will be lost or not????
and if it ll lost than any way to save it or recover it/ ? i had extremely precious data in it. but being careless i didnt backed my personal data in my laptop.. please help me guys.. ready to pay any cost for my data
Click to expand...
Click to collapse
Flashing stock firmware with Odin will not delete your data from SD card. You will probably need to do factory reset, it will delete your contacts, sms, apps... But stuff from internal and external sd will remain there.
You bricked it because 4.4.2 uses preload partition for a swap, and it is partitioned in different way. And on PA 3.69 is probably different.
Or ROM zip of PA was corrupted.
thankyou and one more question
shut_down said:
Flashing stock firmware with Odin will not delete your data from SD card. You will probably need to do factory reset, it will delete your contacts, sms, apps... But stuff from internal and external sd will remain there.
You bricked it because 4.4.2 uses preload partition for a swap, and it is partitioned in different way. And on PA 3.69 is probably different.
Or ROM zip of PA was corrupted.
Click to expand...
Click to collapse
thanx a lot buddy now i can flash it being tension free. but can you tell me the way to flash PA without bricking /????
shivamgaba22 said:
thanx a lot buddy now i can flash it being tension free. but can you tell me the way to flash PA without bricking /????
Click to expand...
Click to collapse
I did not use that version that you used. I think that you will not have a problem when you install it over stock, I explained you why you had problem when you did it over CM11.
Sent from my GT-I9070 using Tapatalk
Thanx a lot
Everything fine now with all data restored..
Once again thnx buddy
Sent from my GT-I9070 using XDA Premium 4 mobile app
Hi
I 've bricked my phone as i was trying to clear cache 'n partition of my rooted phone. I assume it must have cleared the software as well.
i'm trying to flash it via odin but it is showin FAIL. i'm putting a pda .md5 file from sammobile 'n it's still not working. pl help.
Neo2803 said:
Hi
I 've bricked my phone as i was trying to clear cache 'n partition of my rooted phone. I assume it must have cleared the software as well.
i'm trying to flash it via odin but it is showin FAIL. i'm putting a pda .md5 file from sammobile 'n it's still not working. pl help.
Click to expand...
Click to collapse
You can't brick phone with clearing cache. Did you wipe system partition? Try to install same ROM that you had (if you had).
Give us a screenshot of Odin fail. What exactly happen. And what is the full name of md5 that you put in pda of Odin. Try different version of Odin too.
shut_down said:
You can't brick phone with clearing cache. Did you wipe system partition? Try to install same ROM that you had (if you had).
Give us a screenshot of Odin fail. What exactly happen. And what is the full name of md5 that you put in pda of Odin. Try different version of Odin too.
Click to expand...
Click to collapse
Yes, i did wipe system partition. Should i have not done that ???????/
Name of md5 - I9070DDULP8_I9070ODDULP8_HOME.tar.md5 .. Can you suggest another one ?
I did have a ROM named light JB which i found here only. Its location showthread.php?t=2244441.
pl guide future course of action.
TIA.
Neo2803 said:
Yes, i did wipe system partition. Should i have not done that ???????/
Name of md5 - I9070DDULP8_I9070ODDULP8_HOME.tar.md5 .. Can you suggest another one ?
I did have a ROM named light JB which i found here only. Its location showthread.php?t=2244441.
pl guide future course of action.
TIA.
Click to expand...
Click to collapse
Go back to recovery, and if you have ROMs zip install it again.
Ofcourse you shouldn't wipe system partition, system files are there...
And if you can't install ROM again, what error do you get in Odin?
shut_down said:
Go back to recovery, and if you have ROMs zip install it again.
Ofcourse you shouldn't wipe system partition, system files are there...
And if you can't install ROM again, what error do you get in Odin?
Click to expand...
Click to collapse
I didn't think twice before wiping it. My bad.
Anyways, That's the issue. I can't go to recovery. Phone only shows the odin mode (if i press VOL. DOWN+HOME+POWER).
Odin simply says FAILS.
Neo2803 said:
I didn't think twice before wiping it. My bad.
Anyways, That's the issue. I can't go to recovery. Phone only shows the odin mode (if i press VOL. DOWN+HOME+POWER).
Odin simply says FAILS.
Click to expand...
Click to collapse
Well then you did not just wipe system, you installed some GB based ROM over?
You have log window in Odin, where it fails? Try to redownlaod firmware again, and then install again.
What version of Odin do you use? Try 3.x.
shut_down said:
Well then you did not just wipe system, you installed some GB based ROM over?
You have log window in Odin, where it fails? Try to redownlaod firmware again, and then install again.
What version of Odin do you use? Try 3.x.
Click to expand...
Click to collapse
Odin Version - 3.07
I'm not sure it s GB based ROM and neither if it's JB. Can you take some more pain 'n send me a proper link ? please.
My older custom ROM is http://forum.xda-developers.com/showthread.php?t=2244441 - http://d-h.st/vge
Neo2803 said:
Odin Version - 3.07
I'm not sure it s GB based ROM and neither if it's JB. Can you take some more pain 'n send me a proper link ? please.
Click to expand...
Click to collapse
But it should be the same:
http://terafile.co/222154239129/INU-I9070DDULP8-20130412134604.zip
http://rapidgator.net/file/0a25225062db04ba2c8216cca12972d2
Check the file zize of zip when you download it, it should be 425MB.
shut_down said:
But it should be the same:
http://terafile.co/222154239129/INU-I9070DDULP8-20130412134604.zip
http://rapidgator.net/file/0a25225062db04ba2c8216cca12972d2
Check the file zize of zip when you download it, it should be 425MB.
Click to expand...
Click to collapse
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Neo2803 said:
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Click to expand...
Click to collapse
ROM is fine. And you was on GB or JB before? If you was on GB then this problem you got is normal. You must be on JB (flash JB firmware) if you install JB ROM.
And again, if you get FAIL on Odin DO A SCREENSHOT AND POST IT HERE. To see what cause that fail. Left part of this screenshot is a log http://4.bp.blogspot.com/-gkWcapOu2...gingerbread+s5570jpq8+samsung+galaxy+Mini.jpg
Blue, where it says Message.
This is for other phone, do not pay attention on that, I just told you what I need to see.
---------- Post added at 11:28 AM ---------- Previous post was at 11:02 AM ----------
Neo2803 said:
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Click to expand...
Click to collapse
And no, you must install Firmware not, not ROM. Because you probably installed JB ROM over GB. That is why you do not have working recovery.
Finally unbricked !!!
shut_down said:
ROM is fine. And you was on GB or JB before? If you was on GB then this problem you got is normal. You must be on JB (flash JB firmware) if you install JB ROM.
[/COLOR]
And no, you must install Firmware not, not ROM. Because you probably installed JB ROM over GB. That is why you do not have working recovery.
Click to expand...
Click to collapse
Finallyyyyyyy !!! yipppieee !!! I'm able to flash my phone with a JB Firmware. I shall be more careful in future.
http://i.imgur.com/UMv2kgs.png
http://i.imgur.com/WPP6yqs.png?1
Thanks a tonnnnn shut_down :good:: God bless you.