Related
Hi,
since yesterday i have a new custom rom ooon my phone.
The MIUI Android 2.3.3 is working but there is one problem- the SIM Card.
I tried 3 diferent Sim Cards but my cellphone does not find them.
What should I do?
A new software or is there an other way because this rom is the best which I have found in the portal.
Thanke ;D
NB: PM me if you have any questions - I wont bother checking this thread again if u have any questions..
OK, I HOPE you have a backup of your EFS folder, /sdcard/efsbackup/efs (????)
Step 1:
Download a modem file from cyanogenMOD i9000 forum, go with either ZSJPG or JQ1 ok?
Step 2:
Flash the modem through clockwork recovery.
Step 3:
Download root explorer from the market and mount system as R/W
Step 4:
Navigate to sdcard/efsbackup/efs
Copy the first file (nvdata.bin or whatever)
Navigate to /EFS and delete the corresponding file then paste your new one
repeat for each item in the EFS folder.
Step 5:
REFLASH the modem you did previously.
You're done and have a working phone.
-----------------------------------------------------------------------------------
*Remember if i helped, click thanks!
hei here i just post a new thread on xda ,post any question on there ,good luck!-- http://forum.xda-developers.com/showthread.php?t=1136532
Hey guys,
i wrote a small tutorial for all this people which have the galaxy s i9010 ( its like the captivate only for german market [armani] ) and want install Cyanogenmod with 100% WORKING GPS.
That was really the main problem, but i solved it with the help of this forum.
please extract all my files, i had to compress them but you cant use them as zip!
First of all go back to stock with your phone. You can download all files from http://www.sammobile.com/showthread.php?t=20 but pay attention:
If you dont use the following files, your phone wont work.
Donwload BOTH Firmwares and choose these 3 files for flashing with Odin:
-GT-I9010-CSC-MULTI-OXA902407.tar.md5 (444,851 mb) --> CSC
-I9010XXKB2-REV00-ALL-low-CL909299.tar.md5 (279,501 mb) --> PDA
-MODEM_I9010XXJK9_REV_00_CL737172_SIGNED.tar.md5 (12,291 mb)--> PHONE
Now you are on stock and everything is working fine but you have Android 2.2
Download the latest Cyanogenmod for Samsung CAPTIVATE on http://www.cyanogenmod.com/
- extract all files into a new folder
- replace the existing modem.bin with the JK9-Armani-modem (same name Modem.bin)
- open with notepad and edit the file META-INF/com/google/android/updater-script
- change all entries “SGH-I896” to GT-I9010 [found this solution here] http://forum.xda-developers.com/showpost.php?p=15822109&postcount=67
- save the file and compress via 7-zip to a new zip-file ( mark all files and folders --> right-click --> 7-Zip --> add to XXX.zip
- put this new zip-file into your sdcard
- Now root your phone via "onecklickroot" ( enable USB-debug and dont forget restart after that) http://forum.xda-developers.com/showthread.php?t=803682
- replace this 3e_recovery file with the existing in System/Bin
- install Rom-manager and install clockworkmod (choose samsung captivate)
- reboot into recovery menu and press 2 times "reinstall packages", after that you start into the clockworkmod
- choose install zip from sd and choose your created zip-file
- copy stock gps files to your internal sd
- start root-explorer and copy all files (the folder gpsd to system/bin
the both files to system/etc)
-reboot phone
OPTIONALLY
you can install "gapps", if you need apps like google-market. You do it same like installing Cyanogenmod, reboot into recovery, install from sd etc.http://goo-inside.me/gapps/
you can use the really nice HTC-keyboard, just put the two keyboard files on your sd card, install them and choose settings/language and keyboard HTC_IME
to activate the keyboard go to sms and press a long time into the text field, now you can choose your input method
Have fun and enjoy your galaxy s I9010 with Android-Version 2.3.7
previously it was very difficult to flash I9010, this post was like real itinerary for me. ThankY!
Though even here i've made a mistake
At the 1st step while flashing with Odin DONT MARK Re-Partition as there is no Pit
No Problem , i know this phone is really difficult to flash back to stock or flash a rom with working GPS
I forgot to upload the PIT, if you need it take it from here.
Greetz from Germany
something seems to be going wrong..
it keeps telling it is updating but it doesnt proceed anymore.
Maybe this is because i cant go back to the original stock rom coz the link is broken (and i dont fully understand th explaination with the 3 files and what to do.
I have a stable andromeda 3 build running but my gps isnt working.
I already copied the gps files into their destination folders(and it asked me to replace so i did this properly).
Should my gps work when i did this or should i take additional steps to get it running?
Thanks in advance
seems like i only miss the 'phone' file , the rest i found via google on the samware site , only the phone file (and the pit , but that one is here already) i still dont have , anyone can help?
Hey yoshiwa,
you need to download all files you can get for samsung i9010 on the samfirmware site. After downloading and extracting you have 5 files, but you only need the three i posted. Its really recommend that you flash back to stock before flashing a new rom.
armani26 said:
Hey yoshiwa,
you need to download all files you can get for samsung i9010 on the samfirmware site. After downloading and extracting you have 5 files, but you only need the three i posted. Its really recommend that you flash back to stock before flashing a new rom.
Click to expand...
Click to collapse
We could install gingerbread bootloader to our I9010 to install custom GB roms?
- replace this 3e_recovery file with the existing in System/Bin
Click to expand...
Click to collapse
Sorry this is the only thing i did not understand?
yoshiwa said:
something seems to be going wrong..
it keeps telling it is updating but it doesnt proceed anymore.
I have the same problem.
Click to expand...
Click to collapse
@MikeFRG
in your folder System/Bin exist a file named recovery. You must overwrite it via root-explorer with the new recovery-file (the modded 3e_recovery file )
@ erycx and szika87
you dont need any bootloaders, just download Odin put in the right fields the right files. You need phone, CSC, PDA, and the small pit file... and it works
Thanks man! It really does work for me. CM7 & CM9
Thank you. It work for my 9010 ARMANI. First I've installed th CM7 and used it for a month without any trouble. Now I used your manual to do the same with CM9. Really cool. It seems to be ok.
Hello.
I flashed a I897 Stock GB ROM on my Armani and my phone modem is not working anymore.
Can you please help?
bbogdanmircea said:
Hello.
I flashed a I897 Stock GB ROM on my Armani and my phone modem is not working anymore.
Can you please help?
Click to expand...
Click to collapse
The whole instructions are in the OP, read it, understand it and follow it.
Thanks, now I am back on I9010 stock.
Can you confirm that all the file links that you posted are working?
I will try and download all files and follow the steps.
Now after going through I897 without phone modem, then bootloop, the back to Armani I can say that I got some experience with Odin and
flashing.
Anyhow do you have any idea why on ROOTED 2.2 ROM Manager will not flash the Clockwork even if it says that it is successfull?
Well now with stock 2.2 and factory reset and everything wipe the phone seems to be moving really fast compared to before I started the whole process.
What can you say about the Cyanoged, how is it working in terms of speed and lagfix?
Thanks!
Will get back.
PS: Now that I looked into the OP I saw that still a Clockwork in needed for installing Cyanogen, but I cannot install Clockwork so I cannot follow your instructions.
Is there any other way to install custom recovery except the ROM Manager application?
bbogdanmircea said:
Thanks, now I am back on I9010 stock.
Can you confirm that all the file links that you posted are working?
I will try and download all files and follow the steps.
Now after going through I897 without phone modem, then bootloop, the back to Armani I can say that I got some experience with Odin and
flashing.
Anyhow do you have any idea why on ROOTED 2.2 ROM Manager will not flash the Clockwork even if it says that it is successfull?
Well now with stock 2.2 and factory reset and everything wipe the phone seems to be moving really fast compared to before I started the whole process.
What can you say about the Cyanoged, how is it working in terms of speed and lagfix?
Thanks!
Will get back.
PS: Now that I looked into the OP I saw that still a Clockwork in needed for installing Cyanogen, but I cannot install Clockwork so I cannot follow your instructions.
Is there any other way to install custom recovery except the ROM Manager application?
Click to expand...
Click to collapse
ROM Manager doesn't support the Captivate. You'll need to flash a custom kernel using Odin (speedmod for 2.2). The only thing I dunno is if it's compatible with the I9010.. But before doing so, you wanna do all the other steps with CM (changing the updater.script and such) and have it on the root of your internal.
After flashing speedmod, you'll be booting directly in recovery to flash the modded CM. Don't forget to grab the Gapps.
It would be really great if you:
1.put link to speedmod kernel and how to flash it on stock 2.2
2.put a link to the modified zip CM archive for I9010
The guide on how to do it.
For now I will wait for these files and a complete guide, I don't want to mess my I9010 again.
I got last CM and tried to modify updater.script, I replaced I896 with I9010, then I observed
I897 also. Should also I897 be replaced to I9010.
Wouldn't it be better if you could post all the modified files that needed to be put into the zip,
or the full zip for the Armani?
Thank you and waiting for the files and steps if you would be so generous.
bbogdanmircea said:
It would be really great if you:
1.put link to speedmod kernel and how to flash it on stock 2.2
2.put a link to the modified zip CM archive for I9010
The guide on how to do it.
For now I will wait for these files and a complete guide, I don't want to mess my I9010 again.
I got last CM and tried to modify updater.script, I replaced I896 with I9010, then I observed
I897 also. Should also I897 be replaced to I9010.
Wouldn't it be better if you could post all the modified files that needed to be put into the zip,
or the full zip for the Armani?
Thank you and waiting for the files and steps if you would be so generous.
Click to expand...
Click to collapse
I don't have a I9010 so Idk much about it. I'm only using the search function (as you should) to find the information I provided you with.
No, I don't have time to get the CM10 zip and change all the script but it's really easy to do. Just search all the SGH-I896 and SGH-I897 and replace them with SGH-I9010. Easy enough.
Speedmod kernel can be found using the search function in the Dev section.. Get the .tar version of it as you will be flashing it with Odin.
As for CM, the whole instructions are already in the OP, if you want a link, I'll just link the OP...
Friendly advice: Go read and understand what you're doing otherwise you'll end up with a bricked phone.
Ok so I will ask more questions until I get it right:
- replace this 3e_recovery file with the existing in System/Bin
- install Rom-manager and install clockworkmod (choose samsung captivate)
- reboot into recovery menu and press 2 times "reinstall packages", after that you start into the clockworkmod
Will these steps work if I dont install the speedmod kernel? Are these steps going to get me the clockwork recovery?
Can I pack the files also with Total Commander zip utility, or I have to use 7zip?
I downloaded cm-10.0.0-captivatemtd
I modified the updater script, I will post it here, can you check that this is ok:
Hello.
Back with a feedback about your instructions and a problem that I had:
I did the following steps:
1.I downloaded latest cm10 and decompressed to a folder
2.I copied the modem.bin that you provided and the updater.script that I posted earlier and then compressed back with 7zip, copied the zip to
my sdcard
3.I copied the recovery file on System/bin with Root_explorer
4.I installed ROM Manager and flashed Clockwork
5.I rebooted 2 times and did reinstall packages, then after that I got to the clockwork recovery
6.I selected install sdcard from zip and selected the image that I modified
The install then started but it halted to an error related to update.zip, it kept showing an option that said to select update.zip,
or some other options, something with adb and so on...
I kept on selecting the cm.zip but it kept on showing the error with update.zip, I selected update.zip but still it showed off the error.
From what I saw on the screen, the error was related to what it is checked in the updater.script, cm is looking for GT-i9010 but in
update.zip you have only captivatemd or something like that...
Are you sure there is no need of an modified update.zip archive on my sdcard too???
After this I got the battery out, put in on Download mode and flashed back to the Armani firmware, now it is back and running,
but I am so sad that I couldn't install CM10.
If you have any ideas why it didn't work please get back with some info, also can you check the updater.script that I posted or better that this,
can you post a modified working cm archive for Armani ???
Thanks a lot!
sorrry I'm a newb user, tried to flashing CM10 nightly rom and succes, but then I realized the baseband is unknown and I can't receive signal. tried flashing this modem http://forum.xda-developers.com/showpost.php?p=20162933&postcount=2 and it cant flashed, it says status 7. tried the 2nd ways to copy modem.bin to radio folder and no luck. can anybody help me?
sorry if i post it to wrong section
Don't flash.
Just unpack the modem and copy and paste modem.bin into /system/vendor using root explorer.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Don't flash.
Just unpack the modem and copy and paste modem.bin into /system/vendor using root explorer.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
thankyou verymuch, that works and really helpful
hotheabilly said:
sorrry I'm a newb user, tried to flashing CM10 nightly rom and succes, but then I realized the baseband is unknown and I can't receive signal. tried flashing this modem http://forum.xda-developers.com/showpost.php?p=20162933&postcount=2 and it cant flashed, it says status 7. tried the 2nd ways to copy modem.bin to radio folder and no luck. can anybody help me?
sorry if i post it to wrong section
Click to expand...
Click to collapse
I have a Samsung Galaxy i987 AT&T GSM US Tablet. I have had CM9 on it working the phone and GPS previously. I now loaded the latest CM10 and have not either found the right modem or have other issues. I loaded the 0923 yesterday and it was said that you could pull the modem from Wiki CM and use CM to load it. I tried both of the modems in the links below one for AT&T and one that says Galaxy i987. Both show that it was successful, but in both attempts the modem.bin file did not show up under the /system/vendor folder. I used Root Explorer to finally move the modem.bin file from both of these download into the /system/vendor folder, and while the modem.bin file did show up, it still has unknown modem baseband and no modem or GPS working.
http://forum.xda-developers.com/show....php?t=1069727
and here
http://wiki.cyanogenmod.com/wiki/Sam...port_Downloads
That is because the latest cm10 move modem.bin back to /radio/modem.bin like cm9 again.
Man, if you want to flash cm10 you have read the whole thread.
Be interested. Don't just jump in.
Sent from my GT-P1000 using xda app-developers app
priyana said:
That is because the latest cm10 move modem.bin back to /radio/modem.bin like cm9 again.
Man, if you want to flash cm10 you have read the whole thread.
Be interested. Don't just jump in.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Wow, thanks for the response. I read the thread every night on the CM10 Development, or is that the wrong one. I saw where dev posted you could get your modem.bin from the wiki and use Clockworks Mod to update again. Also, they were going back on the partition to CM9 like to allow 2gb and that there would be a wipe. Nothing said go to that directory /radio/modem.bin, unless by saying that you could go back to wiki like CM9 meant that directory. I thought I could use Clockworks and do a zip file firmware update. I admit that I am a bit new to all of this, but I have been modding something or other back to the Nintendo PS1 and original Xbox days, I guess I still need to get my sea legs here and will take a thrashing once in a while until I do. I do appreciate the help.
BTW, I got my GPS back, but not my phone. I will go back and search some more, but I got the modem.bin file from
http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_Tab_(GSM):_Support_Downloads
AT&T
UCKJ1
Using Root Explorer I put the modem.bin in the /radio directory. The GPS is working great, but no cell registration. I guess I should say, I get data, but when it goes to dial it beeps and ends the call immediately.
Yes, haha, CM9 was on /radio/modem.bin
then CM10 too, then CM10 move to new MTD partition, and modem.bin goes to /system/vendor/,
then CM10 move back again to another partition (not sure if it is back to same old partition or a new old partition )
but modem is back to /radio/modem.bin
once it is back to /radio, the one in Wiki will work, regardless of the way it is partitioned. You just need to read inside the zip, the updater script put the modem there.
It is a simple matter of modifying the path within the script for any layout.
Having said that, the older modems in modems thread in dev sticky, they are for pre-MTD time. During original Samsung BML partition, the modem is on a partition of its own, so a more complex method is required to put the modem there, including using CWM (zip) and Odin (tar)
But nowadays is just using Root Explorer and you are ok.
That is why I said you should read the whole thread, you will know such changes happening.
There is a CM10 thread and dev and one in General for discussion.
Ask questions in General if necessary, never on Dev one unless you have issue compiling, or have some other dev bug.
If you are interested on CWM updater script, just unpack the rom zip or the modem zip or any of the CWM flashable zip and have a look at the updater-script within the META-INF.
Edit: regarding AT&T tablet no call, I think it is network related. AT&T know you are on tablet and don't allow making calls. That is my theory.
gps and phone fail, baseband unknown
I have the same problem on baseband, where can I get the files and please get me some good link and info.
thanks.
btw is there a way to save the restore data in recovery mode, just in case if I lost it, I have no way to go back to cm9.
priyana said:
Don't flash.
Just unpack the modem and copy and paste modem.bin into /system/vendor using root explorer.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
It is the first sticky tread in Dev section
http://forum.xda-developers.com/showthread.php?t=1069727
get the JPZ modem.
It says Gingerbread but does not matter.
Unzip it to find a modem.bin
Use it with root explorer or ES File Explorer in root mode, system mounted as read-write.
Put in /radio/modem.bin (there may be one already there but likely broken)
hi i new to this forum.sorry if my english is bad
i have some questions.first ill explain what i did and want to doo, and here i need help.
i have an galaxy s gt i9000 and i flashed it to the latest firmware XXJW4.than i rooted it.but now its not rooted.
i downlaode some app system remover, so i disabled/deleted some app taht i dont need or arent needed at'all.
than i googled how to open tar file, used magic iso and opend it.deleted few files from factoryfs.rfs.
now my questios.
1.is it safe to delet these file (dialer, voice search,now buddies, some test files and so on..)
2.can i still flash the firmware without these files and without no bugs to see.
3.im not an expert on this, i need someone to create a tar file using those files that i have on my pc
so i can flash my galaxy.
4.can i replace the kernel to an another one and if so which one can i use.
these files are in my folder now:
-boot.bin
-cache.rfs
-factoryfs.rfs <<< this is the one i oped and deleted files
-modem.bin
-param.lfs
-sbl.bin
-zImage.
thnx for help
Hello guys, I'm here to show you how to fix it without repeatedly turning it on and off. (I provided the stock bluetooth for you guys, that don't have it)
This is only for LTE jem, sorry for any convenience. (For bluetooth.)
1. Download this https://www.dropbox.com/s/29pw4nm27pgl8aj/Bluetooth fix.rar?dl=0
2. Extract it.
3. Replace /System/etc/Bluetooth/bcm2076_20mhz.hcd with BCM2076_26MHZ.HCD
4. Replace /System/vendor/firmware/bcm2076_20mhz.hcd with bcm2076_20mhz.hcd (The one I provided for you)
Then tada! Bluetooth works, you can only connect to compatible devices it seems but bluetooth finally works.
Now onto how to fix amazon jem not being recognized, on your pc/laptop.
I'm going to be honest here, this will be very short lol.
So anyways, go to this link https://windows10skill.com/kindle-fire-not-recognized-on-windows-10/#2 and follow the steps provided. Method 2 helped me, so try that first if you want. (This can work on windows 7 too, I forgot where I found it at but you can try following it still.)
That's all I have, for now. I hope all of you guys get everything fixed! Please let me know if this was helpful for you, I would appreciate it.
This RAR file won't open
Out of curiosity, I tried this with the latest CRdroid 3.8.7 from @transi1 in the other thread (which is useless because the ROM has functional bluetooth out of the box, at least with keyboards and mice). I was able to download and unpack the RAR, and install the files as described (had to remount /system for read-write in an adb shell in order to write in those directories). However, after replacement, the bluetooth didn't work any more, completely dead. When I restored the original files, it started working again. Maybe this is only for the LTE variant of the Jem (which reportedly has another Bluetooth chipset)?
EDIT : I checked that the HCD file above differs from the original one built into the ROM.
bapi28 said:
Out of curiosity, I tried this with the latest CRdroid 3.8.7 from @transi1 in the other thread (which is useless because the ROM has functional bluetooth out of the box, at least with keyboards and mice). I was able to download and unpack the RAR, and install the files as described (had to remount /system for read-write in an adb shell in order to write in those directories). However, after replacement, the bluetooth didn't work any more, completely dead. When I restored the original files, it started working again. Maybe this is only for the LTE variant of the Jem (which reportedly has another Bluetooth chipset)?
EDIT : I checked that the HCD file above differs from the original one built into the ROM.
Click to expand...
Click to collapse
Oh my god, I'm so sorry I forgot to mention this is only for lte devices. Sorry!
Understood step 4. But on step 3 when it states replace a file with a file having a different name, does that mean 1) delete original file and put new file in that folder, or 2) rename new file to existing files name and copy over top of existing file replacing it?
Ok, answered my own question and figured it out.
I did not have such a file in the /System/etc/Bluetooth folder.
I renamed the 26mhz file to 20mhz and replaced (overwrote) the file in the /System/vendor/firmware folder.
It is working great finally after issues for the past few years. Awesome. Thanks.