H guys need some help. Just update my Galaxy S with both JM7 and then with JM8. I updated from my original Norwegian firmware I9000XWJFB/I9000SWCI9000XEEJG1/I9000XXJF5/I9000XWJFB. Problem is after the update I have only wifi connections. I am unable to get any 3G or Edge or any sort of mobile internet connection. I can still phone out etc. Just no mobile internet. I have tried flashing back to JF5, but I get some russian language and still no 3g. Any help would be appreciated.
I have also added Tayutama_Edition_Voodoo_Full_v1.1. But even without it still no 3G.
Currently : PDA:XWJM8 Phone: I9000XXJM4 CSC: OXAJM1 Not sure what that means.
I am in Norway if anyone knows of a firmware I can downgrade to or use in this region. Did not backup my original firmware.
Sounds like you need to set up your apn.
Sent from my GT-I9000 using XDA App
Google for your network providers APN codes, and then set them in settings.
Thanks guys got it working...reflashed the csc file with xee jm1. It worked. Man was I getting worried.
Sent from my GT-I9000 using XDA App
no 3g connection after upgrading to gingerbread for galaxy tab
Dont have 3g connection when i updated my tab from froyo to ginger
My network is singtel from singapore
please help me
email me asap thank you very much
Hi guys I can't really seem to decide about what modem to use here someone recommended the bujp5 but I have really bad signal on wifi which I use the most. Thoughts?
Sent from my GT-I9000 using XDA App
Jpy,jv1 or jq1. I'm now on jq1 and evrything running ok( batt life,signal,wifi). Try one of them or go to htcmania galaxy s section and you'll find a threat about that
any updates about which one is the best modem for spain right now?
Dear friends,
Hope to get help from your side. I have to install language by new rom which is belong 3g, while mine is wifi. so the ODIN failed to make update and the tab stuck in black screen and phone ... computer picture...nothing else I have tried to make format or rest... no way..
please help me
Dear it is:
CDMA 1900/800 EVDO Rev A
GPRS/EDGE
Sph-100 is meant to be cdma or so called p1c
Wifi only model is P1010
So which one us yours?
Be very sure what hardware you have before flashing or Modding anything.
Sent from my GT-P1000 using xda app-developers app
hi guys
network issuse with CM9 for galaxy s gt i9000.it showing NO NETWORK avalible.
any help
Check your baseband. Mine disappeared for a day and came back after I dropped it down a flight of stairs. by no means am I saying this will fix your problem but it solved mine try flashing a new modem.
Try to flash jvu or jw4 modem. These should fix your issue in Europe zone. Otherwise you have to look for branded modems in your area and try to flash one of them to get the best signal.
Sent from my GT-I9000 using Tapatalk 2
Hey
Just downgrade to 2.3.6 valuepack
The same one u flashed before goin to cm9..the same steps...that should solve..then root and update again...
Cheers
If my post helped, don't mind hitting the Thanks button..
thanks for help
thanks for help.i solved my problem
Friends,
Am Recently purchased a Captivate S i897. I am from India and using BSNL Network (900).Now my captivate Unable to connect to network. During network search only 1900 band networks are shown. I am tried severel modems . In some modem Signal bar rise to 2 bars and bsnl logo appears. But my samsung spica shows -81 db and captivate shows -103 db in same place.:crying: My Captivate is now running with slimbean .(In my motorola defy i am using a small application Named baseband switcher for switching basebands simply). I am noob to Captivate. Please help me friends.......
pradeeppk said:
Friends,
Am Recently purchased a Captivate S i897. I am from India and using BSNL Network (900).Now my captivate Unable to connect to network. During network search only 1900 band networks are shown. I am tried severel modems . In some modem Signal bar rise to 2 bars and bsnl logo appears. But my samsung spica shows -81 db and captivate shows -103 db in same place.:crying: My Captivate is now running with slimbean .(In my motorola defy i am using a small application Named baseband switcher for switching basebands simply). I am noob to Captivate. Please help me friends.......
Click to expand...
Click to collapse
You'll have to find a modem that supports 900 band (I think JK4 does but dunno how it works in India).
modem sticky in cap dev forum may be helpful - lots of replies in thread about what works and where.
http://forum.xda-developers.com/showthread.php?t=1227717
After some searches through the forum I found a modem suitable for India is DDJV5. But it is for i1900. So I need a i1900 kernel for DDJV5 modem. So my question is can I flash any i1900 over my i897 ? Or is there any suitable i1900 kernel for i897?
Thanks
Sent from my SGH-I897 using Tapatalk 2
Since you are runnin Slim Bean, you need to get your modem from here...http://soggycashew.weebly.com/cm7miui--ics-modems.html. The modems in that link are compatible for jellybean also.
That is all you need to do. No need to flash a kernel, etc.
Sent from my SAMSUNG-SGH-I747 using xda premium
Tried it. But no luck. The modems are for i1900. I heard that i1900 modem only work with i1900 kernel. So i am looking for a i1900 rom which suitable for i897. Only kk4 is give signal and it is less 15 to 20 db compared to other samsung phones.
Sent from my MB525 using Tapatalk 2
di you read the whole thread? after gb, with ics, cappys ran 9000 modems okay, not just Cappy modems.
Now i got some signals with kv2 and kk4 basebands. But during call voice quality is low and caller in opposite side hear eco of his own voice. Also flashed ddjv5 baseband but no network . During network search only airtel and docomo (both 1900 band) is shown
Sent from my MB525 using Tapatalk 2
pradeeppk said:
Now i got some signals with kv2 and kk4 basebands. But during call voice quality is low and caller in opposite side hear eco of his own voice. Also flashed ddjv5 baseband but no network . During network search only airtel and docomo (both 1900 band) is shown
Sent from my MB525 using Tapatalk 2
Click to expand...
Click to collapse
There isn't much else you can do other than keep trying. Also, did you test your signal outside?
pradeeppk said:
Now i got some signals with kv2 and kk4 basebands. But during call voice quality is low and caller in opposite side hear eco of his own voice. Also flashed ddjv5 baseband but no network . During network search only airtel and docomo (both 1900 band) is shown
Sent from my MB525 using Tapatalk 2
Click to expand...
Click to collapse
U gotta use the modems from the link i posted in my previous post, because u r runnin a jb rom or u will have call issues.
Sent from my SAMSUNG-SGH-I747 using xda premium
Is it do any harm during overwrite modem.bin from the zip to radio folder . if it is possible I only need to extract each modem zip to separate folders and overwrite the modem.bin in radio folder and a single reboot.
Sent from my SGH-I897 using Tapatalk 2
pradeeppk said:
Is it do any harm during overwrite modem.bin from the zip to radio folder . if it is possible I only need to extract each modem zip to separate folders and overwrite the modem.bin in radio folder and a single reboot.
Sent from my SGH-I897 using Tapatalk 2
Click to expand...
Click to collapse
Pradeep it's BSNL, now just leave it and port your number to any other network be it Airtel or Vodafone. As simple as that.
Sent from my SGH-I897 using xda premium
Many thanks dear friends. Finely i am settled with jk4 modem. Its working pretty good compared with other modem.
Sent from my SGH-I897 using Tapatalk 2
hi..i have installed cm10.1 in my cappy..im getting a signal with the modem that was included in the rom zip...but with this rom im not able to recieve calls..i can call msg and recieve msgs..but i cant recive calls....can anyone tell me whats the problem??
l2azoredge said:
hi..i have installed cm10.1 in my cappy..im getting a signal with the modem that was included in the rom zip...but with this rom im not able to recieve calls..i can call msg and recieve msgs..but i cant recive calls....can anyone tell me whats the problem??
Click to expand...
Click to collapse
three ideas-
check call settings for reject or forward all calls setting. also, check with at&t or your carrier.
are you using bluetooth headset? I've noticed that the dialer in 0327 build doesn't always recognize when the bluetooth headset is available. I have to change the setting to Bluetooth after dialing.
clear caches, then reflash the rom.