Hi im trying to return galaxy 8.9 tablet back to stock using odin, but it gets stuck at system.img.md5 and wont move...is there any way to fix.. tried switching usb ports and no luck...please need help
alrigh... alrigh... alriiiight got it to work after almost 5 days with out a tablet....which i really missed... I finally fixed the god damn issues with this stupid thing.....
with odin constantly hanging on system.img i had to work around it...
first got odin far enough into system.img to were cwm would work
second i adb into the tablet and pushed rom file into sdcard
third i installed rom and finally got my tablet back
yessss
also learned how to open tablet and pull the battery out....which i didn't need to do at all
What is your recent history in terms of Rom & recoveries installed, other errors encountered... ?
Did you do any formats, wipes, factory resets, and if so, in what environment (android, recovery, adb, ...)
---------- Post added at 09:07 AM ---------- Previous post was at 09:06 AM ----------
Have you tried simple options like restarting the pc, reinstalling tab's drivers, ...
Apologies, not relevant to this post
whisperingforce said:
... reverted back to honeycombe 3.2. The problem i have is that it now will not let me access or set up my google account. I have been unable to go back to stock.
Kies is also not recognising my tablet.
Click to expand...
Click to collapse
This is completely unrelated! Pls create your own thread, or search for a topic that's actually similar to yours, instead of trampling over another...
sonko2k said:
Hi im trying to return galaxy 8.9 tablet back to stock using odin, but it gets stuck at system.img.md5 and wont move...is there any way to fix.. tried switching usb ports and no luck...please need help
Click to expand...
Click to collapse
I had the same issue after upgrade to US stock ICS and attempt to install CWM recovery resulted in a tablet that would not boot. Rebooted into recovery mode, rebooted from there to download mode and tried the Odin flash again using the US stock ICS. Each time I did this it got a bit further (as indicated by the download bar on the tablet screen) and eventually it succeeded. I am no expert so I completely fail to understand why this worked but it did.
fred_be9300 said:
What is your recent history in terms of Rom & recoveries installed, other errors encountered... ?
Did you do any formats, wipes, factory resets, and if so, in what environment (android, recovery, adb, ...)
---------- Post added at 09:07 AM ---------- Previous post was at 09:06 AM ----------
Have you tried simple options like restarting the pc, reinstalling tab's drivers, ...
Click to expand...
Click to collapse
okay so recent..... rom was ics 4.0.4 version 3 uploaded by safariking...had ClockworkMod Recovery v5.5.0.4.... and yes i formatted ,wiped, and factory restarted, all in clockwork recovery... i have restarted the pc and reinstalled drivers and got a little bit further but odin still gets stuck... tried to restore with backup but get E: cant mount /sdcard/
sonko2k said:
okay so recent..... rom was ics 4.0.4 version 3 uploaded by safariking...had ClockworkMod Recovery v5.5.0.4.... and yes i formatted ,wiped, and factory restarted, all in clockwork recovery... i have restarted the pc and reinstalled drivers and got a little bit further but odin still gets stuck... tried to restore with backup but get E: cant mount /sdcard/
Click to expand...
Click to collapse
Just like i said before.. In warning: Do not wipe or anything related to that if youre in ICS..
With stock kernel or stock recovery or One of them but you still in stock ICS boot.img wiping is risky..
if you use a safe recovery but your boot.img is not safe. ..or your boot.img is safe but recovery.img isnt. .
Your still have the emmc bug risk..
Stuck on system.img means odin not recognized your system partition.. Maybe corrupted or faulty..
Please read my warning in general section..
suwandiapr said:
Just like i said before.. In warning: Do not wipe or anything related to that if youre in ICS..
With stock kernel or stock recovery or One of them but you still in stock ICS boot.img wiping is risky..
if you use a safe recovery but your boot.img is not safe. ..or your boot.img is safe but recovery.img isnt. .
Your still have the emmc bug risk..
Stuck on system.img means odin not recognized your system partition.. Maybe corrupted or faulty..
Please read my warning in general section..
Click to expand...
Click to collapse
so is my tab bricked or is there any other way
fixed
sonko2k said:
fixed
Click to expand...
Click to collapse
For others who may have this problem in the future, how did you fix it?
boscorama said:
For others who may have this problem in the future, how did you fix it?
Click to expand...
Click to collapse
First post
How did you get the battery out?
orlandoxpolice said:
How did you get the battery out?
Click to expand...
Click to collapse
i took a thin box cutter blade and ran it around the edge of the screen while gently pushing out and pulling up... the screen easily separates from the back cover.... behind the screen is a white battery with small mutil colored wires...gently pull up the wires from the mainboard..... battery is now disconnected.... to put back just push those wires back down onto its connectors....
to completely remove there are screws running along the battery... and two ribbons...detach ribbons and unscrew battery
same problem
i have the same problem how do u use adb to install rom?
or what do u use to install rom,adb or odin? and what procedure do you do? please reply immediately..thanks
See my signature
This thread saved my ass. I too was stuck at the system.img.
Tried to restore using ADB but no joy. I was still able to access the download mode so kept trying ODIN.
It turned out to be my USB 3.0 ports on my laptop.
As soon as I used my USB 2.0 ports on my docking station ODIN worked fine!:laugh:
gutomlagi said:
i have the same problem how do u use adb to install rom?
or what do u use to install rom,adb or odin? and what procedure do you do? please reply immediately..thanks
Click to expand...
Click to collapse
if odin hangs up halfway through the process, what u have to do is install stock recovery through odin.... then go in to recovery and format data...go back to odin and install clockwork recovery.... go back into recovery and mount system and mount data... next download a app called quick adb pusher on to pc select the rom u want to push... under destination type /data/media/ press send and install ur rom
Failed with Odin 3.09, worked with Odin 3.07
I don't know if this will help.
I needed to re-flash my SM-T310 with the Kitkat 4.4.2 Stock ROM. I found a page suggesting I used Odin 3.09 and the stock ROM pointed to from the Samsung site. I started the load, and saw the same problem, my Odin Log looked just like the one posted earlier. Out of sheer desperation, I started again using the version of Odin (3.07) I had previously used to load TWRP.
And it worked perfectly. Loaded the various components, rebooted, came up with the initial screen ... Phew !!
Maybe I just had some sort of nasty glitch, maybe Odin 3.07 is a bit less picky (!) I have no idea. All I know is it worked for me !!
I had this same problem - got stuck on system.img very near the end, stayed there for hours. Finally fixed it by attaching the usb cable to a different port *d'oh*
same problem stuck in system.img
sonko2k said:
Hi im trying to return galaxy 8.9 tablet back to stock using odin, but it gets stuck at system.img.md5 and wont move...is there any way to fix.. tried switching usb ports and no luck...please need help
alrigh... alrigh... alriiiight got it to work after almost 5 days with out a tablet....which i really missed... I finally fixed the god damn issues with this stupid thing.....
with odin constantly hanging on system.img i had to work around it...
first got odin far enough into system.img to were cwm would work
second i adb into the tablet and pushed rom file into sdcard
third i installed rom and finally got my tablet back
yessss
also learned how to open tablet and pull the battery out....which i didn't need to do at all
Click to expand...
Click to collapse
i dont get it what you are talking about like cwm and adb without any logic my phone is bricked and i need your help my flash just stuck in system.img
did you have any idea then please give a reply
..............
Related
Hi,
Tried to install Kingdroid 1.5 yesterday. since than I'm trying to fix my note with no success.
This is what I tried to do:
http://forum.xda-developers.com/showthread.php?t=1652831
I failed to do the following step:
-We went into recovery and install this kernel without leaving the recovery going to advanced and reboot in recovery
And the rom was not installed successfully.
because of panic, tried to restore my device to stock ICS from a previous backup - failed.
Tried another backup of GB - Failed.
Tried ODIN for Stock ICS and succeeded.
After success on this, tried restoring again to my previous backup, and since than I'm stuck on " factoryfs.img"
Tried Abd, but my device was not recognized on 3 Win machines and 1 linux box.
I have download mode available, and also recovery mode.
Currently, I'm bricked, thinking to take it to the shop I bought it at...
Any other Ideas?
Thanks a lot!
asafki said:
Hi,
Tried to install Kingdroid 1.5 yesterday. since than I'm trying to fix my note with no success.
This is what I tried to do:
http://forum.xda-developers.com/showthread.php?t=1652831
I failed to do the following step:
-We went into recovery and install this kernel without leaving the recovery going to advanced and reboot in recovery
And the rom was not installed successfully.
because of panic, tried to restore my device to stock ICS from a previous backup - failed.
Tried another backup of GB - Failed.
Tried ODIN for Stock ICS and succeeded.
After success on this, tried restoring again to my previous backup, and since than I'm stuck on " factoryfs.img"
Tried Abd, but my device was not recognized on 3 Win machines and 1 linux box.
I have download mode available, and also recovery mode.
Currently, I'm bricked, thinking to take it to the shop I bought it at...
Any other Ideas?
Thanks a lot!
Click to expand...
Click to collapse
If you have download mode available, then you're not bricked, only soft-bricked perhaps.
Try flashing again with Odin...
From my knowledge, superbricks occur when wiping on an unsafe ICS kernel, such as old i9220 leak repack, LPY...
eug3n91 said:
If you have download mode available, then you're not bricked, only soft-bricked perhaps.
Try flashing again with Odin...
From my knowledge, superbricks occur when wiping on an unsafe ICS kernel, such as old i9220 leak repack, LPY...
Click to expand...
Click to collapse
in fact all ics kernel will have chances of superbricks, since he trying to restore....which wipe data will take place... that is superbrick i think
whitepandaaa said:
in fact all ics kernel will have chances of superbricks, since he trying to restore....which wipe data will take place... that is superbrick i think
Click to expand...
Click to collapse
CM9 kernels, based on i9100 update 4 are safe. That makes official Cyanogen Mod 9 Nightlies and ROMs like Asylum and ParanoidAndroid safe
From his post I got that he was able to flash official ICS with Odin once, meaning it didn't get stuck at factory.fs...so...might be still hope
From what I get, we should add another one to the long list of hard bricks.
Sent from my GT-N7000 using XDA
If you are stuck on NAND write, factoryfs.img you are super bricked. Sorry......
I'm guessing you tried restoring your backup in CWM??
My Galaxy note is stuck on black screen no response from buttons just black screen.
This was after I did a wipe data and installed CM9 rom.
What options do I have, will one of these jtag dongles help me?
I just saw some ebay sellers offering an unbrick service for about £21 (im in the uk) where you post it to them to fix.
Any help appreciated
aquanuke said:
My Galaxy note is stuck on black screen no response from buttons just black screen.
This was after I did a wipe data and installed CM9 rom.
What options do I have, will one of these jtag dongles help me?
I just saw some ebay sellers offering an unbrick service for about £21 (im in the uk) where you post it to them to fix.
Any help appreciated
Click to expand...
Click to collapse
I think you have SOD.Its a known issue with cm9 to have SOD's.Sorry to ask this silly question,did you try to pull out the battery and boot he phone???
What is SOD ?
Yes pulled the battery, but cant get anything from phone. Even if I put it on charge nothing.. just a black screen
aquanuke said:
What is SOD ?
Yes pulled the battery, but cant get anything from phone. Even if I put it on charge nothing.. just a black screen
Click to expand...
Click to collapse
SOD is screen of death.Its nothing but when deep sleep the phone doesnt wake up again and needs to be restarted.
try to put the phone in download mode though the screen is not seen and connect it to odin and see if it gets detected.
Tried to put it in download not mode but buttons are not responding, nothing when I connect to pc either
aquanuke said:
This was after I did a wipe data and installed CM9 rom.
Click to expand...
Click to collapse
What Rom were you on prior to flashing CM9?
chasmodo said:
What Rom were you on prior to flashing CM9?
Click to expand...
Click to collapse
KingDroid_ICS_NoteMania_Edition_v1.6
aquanuke said:
KingDroid_ICS_NoteMania_Edition_v1.6
Click to expand...
Click to collapse
Ah that means you didnt read the guide correctly.It clearly states that you need to be in proper gb with cf-root kernel.
aquanuke said:
KingDroid_ICS_NoteMania_Edition_v1.6
Click to expand...
Click to collapse
You are Superbricked. Get your phone to a Samsung Service cetre for the motherboard replacement.
JTag is not an option here, it won't work.
ooopppsss ok thanks.
I even tried re-partitioning using Odin and PIT file. seems that it is always stuck on the same spot.
Fixed!!!
I used this: http://forum.xda-developers.com/showthread.php?t=1682444
Nice asafki shame I can't try that as o2 gave me a brand new note :good:
asafki said:
Fixed!!!
I used this: http://forum.xda-developers.com/showthread.php?t=1682444
Click to expand...
Click to collapse
check how much data space you lost.
Sent from my GT-P1010 using XDA
Hey guys, it's been a while!
Anyway, before I even got my I9000 I had everything sorted to install Darky's ROM and the Speedmod kernel. Some time between them working perfectly and now, I plugged the phone in to Kies and it has tried to update me to GB. SM and DR did not like this.
I managed to do a factory reset (or whatever it is in CWM), and that got the phone to boot, but it isn't pretty. I get the kind of graphical messing up that a dying GPU would render whilst booting the phone, it reboots 25% of the time I am using the music player, and I can NOT boot in to download or recovery any more. I already tried plugging it in to Kies in the hopes it could just wipe the phone over and start again, but it simply does not recognise it.
Likewise, I would look in to the files I need to just do the equivalent of a full format with Odin/ADB, but without download mode I don't think that would even work.
So, the question is; just what the **** am I supposed to do?
USB recovery jig.
can you get into your phone ??????????? I mean can you reach Settings ???? because I didnt read all your speech .
Search for "recovery.tar" and flash it with MOBILE Odin, this would give u cwm and flash a new rom in cwm or flash a stock rom with mobile Odin. Good luck
snapper.fishes said:
USB recovery jig.
Click to expand...
Click to collapse
Hmm, good idea. I'll see what I can do.
hassanalip21 said:
can you get into your phone ??????????? I mean can you reach Settings ???? because I didnt read all your speech .
Click to expand...
Click to collapse
Phone is more or less functional, it's just that I can't get in to Recovery or Download. At all.
zodiaxe66 said:
Search for "recovery.tar" and flash it with MOBILE Odin, this would give u cwm and flash a new rom in cwm or flash a stock rom with mobile Odin. Good luck
Click to expand...
Click to collapse
Mobile Odin? Interesting, will look in to it.
EDIT: This recovery.tar; should it be on my phone already or do I have to find one? Because Astro can't find jack **** on my phone.
EDIT2: Scratch that, found it. Trying to flash it using "Open File..." has just resulted in it being stuck at:
"Flashing...
Flashing Kernel..."
for the last 10 minutes...
Thanks for the replies so far guys!
solved it ???????????
Nope. Sorry, I have been editing that post rather than enter new posts (until someone else posts, of course).
EDIT: Still flashing...
Ok, it now won't boot at all (stuck at the Samsung splash load screen), BUT, importantly, I can get in to download mode and CWM recovery.
What do I download and do to entirely wipe the **** out of this phone and start again?
EDIT:
Fixed. Sorted. Thanks for your help guys, it is much appreciated.
so my brother brought me his semi bricked n7000 "btw i searched and googled"
well, yesterday my brother brought me his cellphone which doesn't boot anymore, he wanned to install a custom rom since he saw that i have a fast one (galaxy s I)
so when i asked him what he did , he said he followed all the steps in rootgalaxynoteDOTcom/galaxy-note-roms/kingdroid-ics-rom-v3-0-for-galaxy-note-gt-n7000-best-ics-romtouchwiz-ux/[/url]
but then, his phone didn't boot, so he wiped - reset factory setting, which i read is a BIG NO when you're flashing ICS.
so whats done is done, i am trying to get it back , i can boot in recovery mode/download mode ... i tried out many kernels like AbyssNotekernel42RedTouchCustomLogo or speedmod, and downloaded at least 4 or 5 GB stock roms.
sadly , if odin flash is successful, it stuck on (samsung galaxy note gt-n7000) black srcreen, reboots few times then stays still...
if the odin flash wasn't successful , it keeps stuck on data.img and never goes beyond that .
i did all the steps i could find, wiped data after installed stock GB rom and rebooted, nothing worked
i even used rogue_ET-recoveryonly , and i think it went along format all the way, but still nothing happened after that.
the only thing i haven't tried yet was the repartition + pit file, i couldn't find the PIT , most of the roms have pda/modem/csc ... so if anyone can help out, i would really appreciate it ..
thanks
First thing you should do is check other threads about that around here.
If you can get it into download mode, you could give flashing with Odin a try. If it doesn't get stuck at factory.fs, then you're not superbricked.
If it does get stuck, then you have 2 more hopes:
- HOPE 1
- HOPE 2
If those don't work either...I'm afraid it's off to the Samsung Service center for a shiny new motherboard.
Best of luck to you and hope you get your Note up and running as soon as possible...
thanks, no it doesn't get stuck at factoryfs at all , i did check out most of the threads here, and most of them say "go back to GB with odin and if its stuck on samsung gt-n7000 boot screen just go back with recovery mode and then wipe data / cache " but never worked, so i thought i should ask around here
i'll check out the threads you posted and see what i can come up with
weird, i used the 16gb pit - repartition (check)
and i flashed it with SGN_XX_OXA_KJ1_FACTORYFS through odin.
and its still the same, the flashing with odin was successful and everything went fine, no hanging , no delays or what so ever. after it restarts its stuck on the black samsung galaxy note gt-n7000 screen
im gonna wipe data / cache again but i doubt that would fix anything.
so any idea what could be wrong? specially when the flashing process went fine?
i've already tried like 4 stock roms ,
arabic uae , europe , saudia and the SGN_XX_OXA_KJ1_FACTORYFS
i wonder if i need to put something in boot space in odin "just a thought"
ive tried downloading roms from here [STOCK ROMS] N7000 All stock ROMs + install + Root guide All at 1place,Latest ICS LQ3
and here [STOCK ODEX PRE ROOTED ROMs] for Odin PC no counter & triangle
any ideas?
For OP:
If you are not stucking while flashing from PC Odin then you are not superbricked.
I think you got corrupted /system or other partition; I saw another thread where OP was getting this sort of hang due to filesystem corruption which can't mount.
Entropy512 gave simple dd command based solution for erasing initial 1MB of partition.
Try searching for corrupted filesystem/partition related information. I can't recall exact thread title, sorry.
I hope this will help.
I found the post/thread for you to check: http://forum.xda-developers.com/showpost.php?p=27102526&postcount=16
thanks for the reply , even think i flashed the abyss and the 4pda_kernel i still can't get anything when i do adb devices >.>
so im trying to figure out whats wrong
johar123 said:
thanks for the reply , even think i flashed the abyss and the 4pda_kernel i still can't get anything when i do adb devices >.>
so im trying to figure out whats wrong
Click to expand...
Click to collapse
Should try to install/reinstall samsung usb driver package. or try reinstall Kies also provide drivers for Note.
If driver is install properly: when connect with PC using usb cable it need to be shown under hardware management as something like "android composite adb interface" or something like that.
johar123 said:
thanks for the reply , even think i flashed the abyss and the 4pda_kernel i still can't get anything when i do adb devices >.>
so im trying to figure out whats wrong
Click to expand...
Click to collapse
Also are you trying to connect adb after booting the phone ? Means in a stuck state ? I think you can try enabling ADB thing from CWM rather than trying to boot phone fully.
hmm i can't find an option in CWM that suggests that , still searching
also im trying to find roms that i can install from CWM , are there any GB roms that can be directly installed from CWM ?
thanks.
johar123 said:
hmm i can't find an option in CWM that suggests that , still searching
also im trying to find roms that i can install from CWM , are there any GB roms that can be directly installed from CWM ?
thanks.
Click to expand...
Click to collapse
Hi: I understand he means boot the phone into CWM and then connect to PC in that environment. adb need to be run from PC while the phone is booted into CWM recovery.
Still, most of the custom roms are in the .zip format and can be install using CWM. they just now become a bit more difficult to find since dev move on to ICS/CM9 roms. Still try to find some GB roms in the forum such as: rocket GB, litening GB, xtralite GB....
This is the link for Rocket rom GB. Better try v22 than v23.
http://forum.xda-developers.com/showthread.php?t=1380284
Check rom:
http://download.checkrom.com/roms/a...oteHD_V3.zip?iframe=true&width=950&height=420
cheers,
forest1971 said:
Should try to install/reinstall samsung usb driver package. or try reinstall Kies also provide drivers for Note.
If driver is install properly: when connect with PC using usb cable it need to be shown under hardware management as something like "android composite adb interface" or something like that.
Click to expand...
Click to collapse
done that already.. everyone is saying is "get into recovery mode" >.>
johar123 said:
done that already.. everyone is saying is "get into recovery mode" >.>
Click to expand...
Click to collapse
Yes, recovery mode is in CWM. (in case you have not done it: Enter recovery by,from phone power off: pressing volumeup + home + power and release power when see samsung letter while still hole the other two buttons.)
forest1971 said:
Hi: I understand he means boot the phone into CWM and then connect to PC in that environment. adb need to be run from PC while the phone is booted into CWM recovery.
Still, most of the custom roms are in the .zip format and can be install using CWM. they just now become a bit more difficult to find since dev move on to ICS/CM9 roms. Still try to find some GB roms in the forum such as: rocket GB, litening GB, xtralite GB....
cheers,
Click to expand...
Click to collapse
thanks for the reply, i've done it many times, when im in the CWM screen, the adb devices still doesn't show anything >.> maybe im using a wrong kernel? what kernel you guys suggest?
johar123 said:
thanks for the reply, i've done it many times, when im in the CWM screen, the adb devices still doesn't show anything >.> maybe im using a wrong kernel? what kernel you guys suggest?
Click to expand...
Click to collapse
hmm. that should be still the problem with usb driver. Have you checked under hardware management if it show the device as "samsung composite adb interface" yet?
kernel should not be the problem with connecting adb. It is the problem with usb driver for Note. Sometime Win7 have problem with driver. You may want to search for another package of samsung usb driver on the web.
I did put some links of GB roms in the post in the previous page. maybe try them first if any luck.
Also try to restart computer to see if the driver issues get solved.
Got to go. Hope that you can solve the problem. GL.
forest1971 said:
hmm. that should be still the problem with usb driver. Have you checked under hardware management if it show the device as "samsung composite adb interface" yet?
kernel should not be the problem with connecting adb. It is the problem with usb driver for Note. Sometime Win7 have problem with driver. You may want to search for another package of samsung usb driver on the web.
GL.
Click to expand...
Click to collapse
thanks, i restarted my pc , reinstalled kies, and now it shows under device manager
now i connect to the phone through adb , i appreciate you pointing it out
which method you think i should go for 1st? this one
http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
or unzipping a rom and then pushing it all through adb?
i think i'll go for removing and repartitioning manually, hopefully it'll work
thanks again guys , i'll post the updates here,
lol, my brother called me and he's like "if u can't fix it by the end of the night, fk it, dont bother yourself with it" but to be honest, im too stubborn, i hope i can fix it
looks like deleting and adding partitions back through parted kinda work, for the first time i was able to pass the boot screen after i installed rocketrom from CWM
however, its been 1/2 hour since im stuck on rocketrom loading screen it keeps looping and looping.. i wonder if i should wait more.. or should i try another rom?
finally got rid of the verification -.- was kinda annoying thats why i didn't bother editing posts,
anyways, rocketrom didn't work, so i decided to flash a stock rom instead , the flash through odin went fine, it was great to be able to wipe data without getting stuck , however, it keeps going though samsung animation over and over, i think im gonna leave it like this one the charger till morning, i wonder if it'll be the same
guess i have to google for "samsung loop" , i wonder why this keeps happening though -.-
-.- leaving it for 6 hours on samsung logo animation didn't do the trick , still looping when i woke up, so i guess i'll do some more search on why this is happening.
You have checked partitions and see no error that means the problem lies somewhere else, not partitions. I have no idea yet, but for me I would try some different roms. Small roms have more chance to work, that is the feedback I got from some people:
- try check rom in the link I sent
- try paranoid android which is CM9, or asylum
- extralite
cheers.
forest1971 said:
You have checked partitions and see no error that means the problem lies somewhere else, not partitions. I have no idea yet, but for me I would try some different roms. Small roms have more chance to work, that is the feedback I got from some people:
- try check rom in the link I sent
- try paranoid android which is CM9, or asylum
- extralite
cheers.
Click to expand...
Click to collapse
thanks buddy, i appreciate your help, the partition "USED" to give me error when i did the check 9 10 11 , but after removing the partition and reformatting them (and i also removed the cache partition) now its working fine "i suppose" i didn't do another check, but i might will now that you mention it.
i already tried rocket rom, didn't work, stock rom didn't work, so i'll give the others a try at least it doesn't get stuck on the boot screen, but its stuck on the animation logo which is an improvement
thanks again
Hi Guys.
Got an I9305 here, I rooted it (apparently fine), then (via recovery) flashed a cusom ROM, rebooted but it stayed on the I9305 screen. Now I can't get to recovery, it will go to download but I can detect it via heimdall, and it still wont boot. Have I killed it or is there anything I can do to resurect it? I've been searching the forums here for ages, but I'm just going in circles with getting any closer to a solution.
Ideas?
-S
If you can get download mode then try flashing a stock ROM via Odin.
You're still in luck when you have download mode, when you don't have that or recovery then you start worrying.
PS: don't forget you have a I9305 when searching for a stock ROM.
Sent from my GT-I9305 using Tapatalk 2
aussiesausage said:
If you can get download mode then try flashing a stock ROM via Odin.
You're still in luck when you have download mode, when you don't have that or recovery then you start worrying.
PS: don't forget you have a I9305 when searching for a stock ROM.
Sent from my GT-I9305 using Tapatalk 2
Click to expand...
Click to collapse
I can get to download (the only place I can get), but neither Odin or Heimdall will connect to it, they both just sit there as if the phone isn't plugged in.
-S
Then you don't have the correct drivers installed
Have you used Odin/Heimdall before?
Rekoil said:
Then you don't have the correct drivers installed
Have you used Odin/Heimdall before?
Click to expand...
Click to collapse
OK got it connect now, I've used Heimdall several times on my I9300 without problem so I think it's a hardware problem. I flashed a new recovery and can now get to that when needed but it still wont let me boot any ROMs I flash, it just hangs at the I9305 screen. Is there anyway I can reset the custom binary count from Heimdall/Odin or recovery so I can send it back to get replaced/fixed?
Try this before doing anything drastic, It's stock but rooted but do it through Odin.
http://forum.xda-developers.com/showthread.php?t=1942150
Raistlin1158 said:
Try this before doing anything drastic, It's stock but rooted but do it through Odin.
http://forum.xda-developers.com/showthread.php?t=1942150
Click to expand...
Click to collapse
No joy, looked like it worked, but stuck on the I9305 screen again ;^<
Sanukk said:
No joy, looked like it worked, but stuck on the I9305 screen again ;^<
Click to expand...
Click to collapse
These roms you've been flashing, do they contain a kernel? Hanging on boot screen can be indicative of a couple of things, firstly, if you have the wrong kernel, fix that. Secondly, try clearing data and cache, this can work wonders. Thirdly, if ADB is currently enabled, try bringing up a shell through it ("adb shell", note: not in recovery obviously, as this mode is already working fine) and type "dmesg", this will print out what the kernel is currently doing, usually if something is erroring you will see the same text re-appear multiple times. If the kernel initiation gets stuck in a loop it will literally never get out of it so that would be a good way to see that, could be a piece of hardware is damaged. Since you can get to recovery I reckon you should be able to mount system/data in that and enable ADB in android if it isn't already, I don't know how to do this though.
Good luck!
Something that's helped me before in this situation was:
Go to mounts and storage in recovery and format System, Data and Internal storage.
Then download stock firmware and Flash via Odin.
This pretty much wipes your phone of everything and gives you a fresh install
You have to wipe data after flashing a ROM
Hi Guys,
I tried flashing a stock ROM via Heimdall again, and this time it worked. The phone is still very flacky though, so I'm convinced it's a hardware issue. Managed to triangle away and get everything stock, so they should never know when I send it back for replacement ;^>
Thanks to all for your suggestions.
-S
Hi people,
i dont know where to go! i have read dozen of sites and post... am i right here?
my S+ i9001
PDA i9001xxkq7
Phone: i9001xxkpk
csc i9001dbtkp2
can:
boot in download mode
can boot recovery mode
can be flashed via odin
can NOT:
-boot to system (always hang or freeeze or shuts down when Samsung logo comes)
-data can not be wiped (Processbar starts but never really start doing something) CWM6. I had some other recoverys and they gave me some messages like can not accsess data/csc or something like these messages in other posts.
-can not do anything in recoverymode exepted, wipe cache.
-can not update zip
-can not gain accsess to sdcard ore sideby
-cant reboot in recovery.
i flashed with odin (and Aries.ops):
-broodROM_RC5
-the right StockROM
-phone seems to be bricked
-no access with Quickflash (dont know if debug mode was or is enabled)
i found some people with similar problems with other devices (i9000 // i9100), but not with the i9001. so i write it here.
always the answer was try a full wipe/reset, but i cant or dont know how to it when the recoverymod or stock recovery doesnt do it.
kind regards
Daniel
im Stuck! where do i have to start further steps?
incredibledan said:
Hi people,
i dont know where to go! i have read dozen of sites and post... am i right here?
my S+ i9001
PDA i9001xxkq7
Phone: i9001xxkpk
csc i9001dbtkp2
can:
boot in download mode
can boot recovery mode
can be flashed via odin
can NOT:
-boot to system (always hang or freeeze or shuts down when Samsung logo comes)
-data can not be wiped (Processbar starts but never really start doing something) CWM6. I had some other recoverys and they gave me some messages like can not accsess data/csc or something like these messages in other posts.
-can not do anything in recoverymode exepted, wipe cache.
-can not update zip
-can not gain accsess to sdcard ore sideby
-cant reboot in recovery.
i flashed with odin (and Aries.ops):
-broodROM_RC5
-the right StockROM
-phone seems to be bricked
-no access with Quickflash (dont know if debug mode was or is enabled)
i found some people with similar problems with other devices (i9000 // i9100), but not with the i9001. so i write it here.
always the answer was try a full wipe/reset, but i cant or dont know how to it when the recoverymod or stock recovery doesnt do it.
kind regards
Daniel
im Stuck! where do i have to start further steps?
Click to expand...
Click to collapse
+1
---------- Post added at 03:48 PM ---------- Previous post was at 03:03 PM ----------
The Same problem with my phone!!
I tried every thing every cwm recoveries and root stock rom and broodrom no boot
Please somebody can help us?
Thank you
I9001 cant format data and emmc
Update,
i finally got an CWM running! aktually 5.5.0.4 but the 6.0.1 and 6.0.2 alsoworked at the end.
now all i cant do is, formatting data and/or mount/format emmc.
Plugged in via USB Cable to PC i can access (internal) sdcard and copy all zips i want. I also cann install them, but i cant wipe data.
i geuss there is an hardware issue, so that all these fine mods are biting on stone, trying to format the "partition"
This results in unbootable systems..i think
At least i tried cm-9-20130220-EXPERIMENTAL-ariesve-rc5 with kernel 3.00, no luck.
i this hardbricked? damaged? i geuss im close to the final. but wich one.....
last try is this hint :http://forum.xda-developers.com/showthread.php?t=2173180
but ODIN crashes when trying the MD5 checksum
thanks for reading!
dan
...
tried to reduce the i9001reset.tar.md5 file with repacking it without the cache and system file. but the reset.zip still has 750mb and odin crashes checking the md5.
are there any other methods to check if the data partition or the emmc.ic is damaged? i cant format via CWM or stock recovery, results in endless process...
and Quickflasher also crashed trying to "wipe at start" mmcblk0p17 (data)
greetz from Berlin
Dan
samen problem
I got the samen problem, please some help. (10 hours working on it
I dit odin to stock
odin to recovery 6
formated sd
installed roms
nothing works, cant mount, cant wipe date,
Has it to do something with .ext (i dunno this really and dunno how to change
did you try to wipe data from stock recovery after install stock rom?
Sent from my GT-I9001 using xda app-developers app
danger
ATTENTION dont try the reset.zip partition recovery as described above! It has killed my phone! i lost any lifesigns from the device, no vital functions over the battery or powersupply. i just cant switch it on again.
this is my end with this!
macar said:
did you try to wipe data from stock recovery after install stock rom?
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
yes, i tried but it did not work, neither from stock or custom ROM.
I'm having the exact same problems. It all started when I updated CWM to 6.0.2.8 as recomended by ivendor, in order to flash CM10. Since then I can't wipe data partition, and no matter what I flash (through both Odin and CWM), the phone doesn't boot anymore. Tried to restore original Samsung ROM, no success... Hasn't anyone figure it out? It seems a large number of user have dealt with this issue in the last days, perhaps the coder of CWM 6.0.2.8 should explain how to fix this mess.
I went to a local phone service, and they said they can't do anything, the whole internal memory has to be replaced. I can't believe this.
No solution?
I have exectly the same problem and i tried everything. I still can get to recovery and download mode, because i didnt mess with reseting broken partition. Can this be solved? I didnt find anyhing in threads, and it seems that a lot of people have this kind of problem now. It all happend on my s+ while i was trying to flash CM10 Beta4.
repair in warranty
Ledo13 said:
I have exectly the same problem and i tried everything. I still can get to recovery and download mode, because i didnt mess with reseting broken partition. Can this be solved? I didnt find anyhing in threads, and it seems that a lot of people have this kind of problem now. It all happend on my s+ while i was trying to flash CM10 Beta4.
Click to expand...
Click to collapse
OK Guys,
here im back. After killing the phone i called samsung i (i was still in warranty), an then i send it to an repair center of their choice. it tooks two weeks an here i got it back. dont know what they have done. but it didnt cost me anything.
end of story from me
greetz dan
search for emmc bug thread in development section http://forum.xda-developers.com/showthread.php?t=2224029
the recovery you have used was compiled over a 3.0 kernel, it has a bug that brick phones, like the galaxy s2 and galaxy note.
New motherboard
incredibledan said:
OK Guys,
here im back. After killing the phone i called samsung i (i was still in warranty), an then i send it to an repair center of their choice. it tooks two weeks an here i got it back. dont know what they have done. but it didnt cost me anything.
end of story from me
greetz dan
Click to expand...
Click to collapse
I got my phone back from service in a 4 days and they changed my motherboard. Now I have completely new motherboard (plus I didnt pay a thing because I still got warranty). Obviously they didn't find out whats wrong with my phone so they put new motherboard
Ledo13 said:
I got my phone back from service in a 4 days and they changed my motherboard. Now I have completely new motherboard (plus I didnt pay a thing because I still got warranty). Obviously they didn't find out whats wrong with my phone so they put new motherboard
Click to expand...
Click to collapse
I managed to "rescue" my eMMC-bricked phone by doing everything I could find about the eMMC brick bug killed my i9001. No root but I can live with that until someone comes up with a better fix.. Good luck, I wish I had a better step by step instruction list on how I did it but honestly I just frantically tried things over and over in different order and finally got it going.
http://forum.xda-developers.com/showthread.php?t=2234489
I guess...
1. Get TWRP 2.2.2.1 or CWM 5.5.0.4/the new 2.6-based 6.0.2.8 CWM recovery flashed.
2. Use QuickWipe (link in my post to the OP).
3. Use ODIN 4.43 to flash that 1.4GB fixmev2.tar file (I did it at least 2-3 times during different stages)
4. Follow the instructions in the links in my post.
5. Good luck.
6. Wait for the devs to solve this problem permanently with new kernels and ROMs and thank them when they solve it.
Scyphe said:
I managed to "rescue" my eMMC-bricked phone by doing everything I could find about the eMMC brick bug killed my i9001. No root but I can live with that until someone comes up with a better fix.. Good luck, I wish I had a better step by step instruction list on how I did it but honestly I just frantically tried things over and over in different order and finally got it going.
http://forum.xda-developers.com/showthread.php?t=2234489
I guess...
1. Get TWRP 2.2.2.1 or CWM 5.5.0.4/the new 2.6-based 6.0.2.8 CWM recovery flashed.
2. Use QuickWipe (link in my post to the OP).
3. Use ODIN 4.43 to flash that 1.4GB fixmev2.tar file (I did it at least 2-3 times during different stages)
4. Follow the instructions in the links in my post.
5. Good luck.
6. Wait for the devs to solve this problem permanently with new kernels and ROMs and thank them when they solve it.
Click to expand...
Click to collapse
EDIT: after it died last night (tried to force root permissions and it would no longer boot) and fiddling to get it back to working condition I tried flashing the file in this post (http://forum.xda-developers.com/showpost.php?p=38671295&postcount=2) to reset partitions and the phone is now stone dead... a true brick.. absolutely nothing happens when I try to power up, enter recovery mode, whatever.. it's dead... stone cold..