Database Develop

[Q] Please help me how to upgrade to ICS

Hello guys ....
I m kind of new here...so i want to ask a little help..
This is the current of my phone configuration:
Firmware version= 2.3.3
Baseband version= I9000XXJVO
Kernel version= 2.6.35.7-I9000XWJVH-CL184813 [email protected] #Dark_core_2.4 Mon May 16 15:02:38 EEST 2011
Build number= DarkyROM JVH v10.1
My phone always " force applications close". So,I want to try install ICS (look stable and smooth) in my phone but questions is which rom and kernel should i use..thank you for your concern

download team icssgs rc4.2 from devolopment and put onto internal sd card
boot in to recovery mode long press volume+, home, and power
click wipe data/factory reset
click wipe cache partition
click install from sd
click rc4.2
phone will bootloop when it does pull battery and go into recovery again
click install from sd
click rc4.2
and most of all click thanks if i helped you, cheers

Thanks sam...i wonder did you also use this version and how long ?
Can i have you current phone configuration, incase reference in hence..
Sent from my GT-I9000 using xda premium

ive been using it quite a while now and havent switched, im using a diferent kernel however, devil 14.2 but i hear 1.1.5 is just as good haven't tested yet
i would just use default settings and tweak as you get used to it, you can download nstools from market for tweaking also voodoo sound for audio tweaking

As above but don't forget to do a Nand backup. Some people have lost there IMEI numbers flashing Team ICSSG. (myself included - if it wasn't for the backup it is a mission to get the emia number back) I tried Team ICSSGS first and haven't looked back.
Semaphore 0.9.1 or Semaphore 0.8.1 are both great kernels. They both have similar speed as devil but have better battery life. (I've tried Devil 15.1 & 14.2, Semaphore 0.8, 0.8.1, 0.9 & 0.9.1)

ICSSGS RC4.2 doesn't have IMEI missing issue.
I tried installing top of stock ROM.
Just do a backup of "efs" folder which holds all the device identity details.
Incase if you loss your IMEI, you can simply replace "efs" folder to resolve the issue.

[Q] How to change kernel semaphore to devil?

Hello, i have few question to ask. I've installed ics333 rom in my sgs 3 days ago and i've prob with battery drain out, camera focus not nice compared to before using froyo and yesterday i noticed that the battery indicator has missing. I heard devil kernel quite stable. How to change kernel? If i want to change to slim ics how to do that? Hope somebody can guide me. Thanks

Hello,
I suppose your phone is root.
If I right, You have to go in CWM mode (combo with Button sound up+menu+power)
then, in this mode : install zip from internal SD then look for the files of the Slim : (base+common). But don't forget the Wipe (take a look here : http://www.slimroms.com/installation.htm)
It is the same operation with the kernel

meaning i've to change ics333 to slim ics right? root mean got superuser in the phone?
which devil kernel you can suggest?

[Q] I need a little help with upgrading

Hi, i have a samsung galaxy S i9000 and i'm kinda new with it
all i want is to make it faster because it runs very slow , i've seen youtube videos about testing some games on the same phone but some of them won't even open up. i got more interested in upgrading it and started searching around on how to. So here is what i want to do:
I want to upgrade it by changing my Rom in Cyanogen 9 and kernel Devil 3. I don't even know if it is good but i'm sure its better than gingerbread.
Can some1 help me out with it , maybe post a little tutorial how to do it.
Aditional info :
-I don't want so save anything from it
-It's rooted
-Firmware version: 2.3.6
-Kernel version: 2.6.35.7-i9000XXJVU-CL851880 [email protected] #2

TheInfamous. said:
Hi, i have a samsung galaxy S i9000 and i'm kinda new with it
all i want is to make it faster because it runs very slow , i've seen youtube videos about testing some games on the same phone but some of them won't even open up. i got more interested in upgrading it and started searching around on how to. So here is what i want to do:
I want to upgrade it by changing my Rom in Cyanogen 9 and kernel Devil 3. I don't even know if it is good but i'm sure its better than gingerbread.
Can some1 help me out with it , maybe post a little tutorial how to do it.
Aditional info :
-I don't want so save anything from it
-It's rooted
-Firmware version: 2.3.6
-Kernel version: 2.6.35.7-i9000XXJVU-CL851880 [email protected] #2
Click to expand...
Click to collapse
CyanogenMod (CM) 9 is really outdated. If you want a good, fast ROM I can recommend Slimbean. It's largely based on CM. You can find more info here:
http://forum.xda-developers.com/showthread.php?t=2060374
Detailed instructions can be found in that thread and on the slimrom website.
Coming from Gingerbread you'll need to install CM10 first, otherwise you will lose your IMEI, which will render your phone unable to make or place calls. Once on CM10 you can then flash Slimbean.

Or using an newer version of CM
fizzefazze said:
CyanogenMod (CM) 9 is really outdated. If you want a good, fast ROM I can recommend Slimbean. It's largely based on CM. You can find more info here:
http://forum.xda-developers.com/showthread.php?t=2060374
Detailed instructions can be found in that thread and on the slimrom website.
Coming from Gingerbread you'll need to install CM10 first, otherwise you will lose your IMEI, which will render your phone unable to make or place calls. Once on CM10 you can then flash Slimbean.
Click to expand...
Click to collapse

well
fizzefazze said:
CyanogenMod (CM) 9 is really outdated. If you want a good, fast ROM I can recommend Slimbean. It's largely based on CM. You can find more info here:
http://forum.xda-developers.com/showthread.php?t=2060374
Detailed instructions can be found in that thread and on the slimrom website.
Coming from Gingerbread you'll need to install CM10 first, otherwise you will lose your IMEI, which will render your phone unable to make or place calls. Once on CM10 you can then flash Slimbean.
Click to expand...
Click to collapse
is this video good to follow? http://www.youtube.com/watch?v=DizY-TV1QG8
i'm about to follow the whole description in next secs

thank u guys
thanks a lot i just installed cm 10 and it runs smooth as hell .

Perfect when we could help!
So now you can try different Roms or newer versions when you want...
TheInfamous. said:
thanks a lot i just installed cm 10 and it runs smooth as hell .
Click to expand...
Click to collapse

there is something i need to know
freakymod2120 said:
Perfect when we could help!
So now you can try different Roms or newer versions when you want...
Click to expand...
Click to collapse
Like i said in the original post i wanted rom cm9 with devil 3 kernel but still didnt know what that means...( the kernel part)
Now that i got the cm10 ive searched around videos on youtube and seen lot of ppl kinda overclocking it with diferent kernel...
I want to do it like with semaphore or some kernel thing... can someone explain to me how it is done and if it is good for the phone?
Some infos:
Android version: 4.2.2
Baseband vers: I9000xxJVT
Kernel version: 3.0.76-gc0a8d45
Memory: 369 mb
Cm vers: 10.1.2-galaxysmtd

Okay different kernel i have no experience with it ,sorry...
But overclocking is available with the stock-kernel in CM 10 ...to about 1200mhz in the performance menu under your settings ...have you activate developer options and performance...do you know how to do it???
http://wiki.cyanogenmod.org/w/Doc:_developer_options
TheInfamous. said:
Like i said in the original post i wanted rom cm9 with devil 3 kernel but still didnt know what that means...( the kernel part)
Now that i got the cm10 ive searched around videos on youtube and seen lot of ppl kinda overclocking it with diferent kernel...
I want to do it like with semaphore or some kernel thing... can someone explain to me how it is done and if it is good for the phone?
Some infos:
Android version: 4.2.2
Baseband vers: I9000xxJVT
Kernel version: 3.0.76-gc0a8d45
Memory: 369 mb
Cm vers: 10.1.2-galaxysmtd
Click to expand...
Click to collapse

help
freakymod2120 said:
Okay different kernel i have no experience with it ,sorry...
But overclocking is available with the stock-kernel in CM 10 ...to about 1200mhz in the performance menu under your settings ...have you activate developer options and performance...do you know how to do it???
Click to expand...
Click to collapse
i just overclocked it to 1200mhz and zram to 18(default) and now everytime i boot it , it just freez and shuts down.... what can i do now?

TheInfamous. said:
i just overclocked it to 1200mhz and zram to 18(default) and now everytime i boot it , it just freez and shuts down.... what can i do now?
Click to expand...
Click to collapse
Your clock isnt stable go download semaphore kernel or devil kernel and flash it in recovery and try then over clocking with their kernel managers.
Sent from my GT-I9000 using xda app-developers app

well
darkknigh_t said:
Your clock isnt stable go download semaphore kernel or devil kernel and flash it in recovery and try then over clocking with their kernel managers.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
well i just got it back at default no shut downs

some Qs
sorry

TheInfamous. said:
well i just got it back at default no shut downs
Click to expand...
Click to collapse
Thats good so now if you want to speed up your phone and overclock it download semaphore or devil kernel and flash in recovery

Some Qs
darkknigh_t said:
Thats good so now if you want to speed up your phone and overclock it download semaphore or devil kernel and flash in recovery
Click to expand...
Click to collapse
Some Qs:
Do i flash semaphore kernel same way i installed ROM?
Will semaphore replace current ROM (cm10)??
Did some1 had any problems with semaphore kernel ? like bricking the phone? is it stable?
Is anyone at the current time having cm10 with smaphore kernel overclocking at 1.2ghz ?
Does Sgs i9k support the overclock stable?

TheInfamous. said:
Some Qs:
Do i flash semaphore kernel same way i installed ROM?
Will semaphore replace current ROM (cm10)??
Did some1 had any problems with semaphore kernel ? like bricking the phone? is it stable?
Is anyone at the current time having cm10 with smaphore kernel overclocking at 1.2ghz ?
Does Sgs i9k support the overclock stable?
Click to expand...
Click to collapse
You flash semaphore the same way you flashed your rom and it will replace stock cm kernel your rom will stay the same make sure you flash the right version to avoid any bricking. It makes cm run better. Overclock depends on your phone some people can overclock high some not so much. Download semaphore changer governor to sio and liveoc to 110% and set min frequenci 400Mhz. That should be enough to make it supper smooth
Sent from my GT-I9000 using xda app-developers app
---------- Post added at 12:54 AM ---------- Previous post was at 12:51 AM ----------
darkknigh_t said:
You flash semaphore the same way you flashed your rom and it will replace stock cm kernel your rom will stay the same make sure you flash the right version to avoid any bricking. It makes cm run better. Overclock depends on your phone some people can overclock high some not so much. Download semaphore changer governor to sio and liveoc to 110% and set min frequenci 400Mhz. That should be enough to make it supper smooth
EDIT: make sure after flashing to download semaphore manager from the playstore its like a control panel for semaphore where all the settings are and i repeat make sure you flash the right version for your android version and phone i9000.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Sent from my GT-I9000 using xda app-developers app

darkknigh_t said:
You flash semaphore the same way you flashed your rom and it will replace stock cm kernel your rom will stay the same make sure you flash the right version to avoid any bricking. It makes cm run better. Overclock depends on your phone some people can overclock high some not so much. Download semaphore changer governor to sio and liveoc to 110% and set min frequenci 400Mhz. That should be enough to make it supper smooth
Sent from my GT-I9000 using xda app-developers app
---------- Post added at 12:54 AM ---------- Previous post was at 12:51 AM ----------
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Just making sure i won't brick it...
http://forum.xda-developers.com/showthread.php?t=1786220
i got 4.2.2 that means i can use the 3.0.0 semaphore version? right?
I'm asking again did anyone else did this to their Sgs i9000 with cm10 rom?
And it's 10.1.2 galaxysmtd

TheInfamous. said:
Just making sure i won't brick it... i got 4.2.2 that means i can use the 3.0.0 semaphore version? right? I'm asking again did anyone else did this to their Sgs i9000 with cm10 rom? And it's 10.1.2 galaxysmtd
Click to expand...
Click to collapse
I don't get it why do you want to flash another kernel? Aren't you happy now with smooth CM10.1x? Here on this forum are many flashing freaks who flash and overclock their phones until the device completely crashes.
CM10.1x is excellent already way it is, if you want to even improve it (first of all to get about double battery life) just upgrade it to the newest nightly version of CM10.2 tomorrow (build 20130828), it will finally have all bigger bugs fixed. Very soon, stable CM.10.2 build will be released out of this nightly. This is the thread:
http://forum.xda-developers.com/showthread.php?t=2385178
If you want to do it, just mind that the developer (pawitp) doesn't mention anymore installing gapps, so this would be the workflow from your present ROM:
Do a Nandroid Backup of your CM10.1.2 build before the upgrade!
Go to CWM recovery mode and check first in "install zip" if your zips of the CM10.2 and Gapps for 4.3 are visible on your internal SD card
Wipe data/factory reset
wipe cache
wipe dalvik cache (under "advanced")
Install the nightly ROM zip from internal sdcard using ClockworkMod Recovery
Install Gapps for CM10.2 (Android version 4.3) while still in recovery
Restore /data from Nandroid Backup (the update will wipe your /data) while still in recovery
Reboot system
The partition layout of CM10.2 (beginning from 20130816 nightly) differs of that of CM10/CM10.1. The first install will wipe your /data to switch to the new layout, but after that you may use CWM to restore/backup data of CM10/10.1/10.2 (in CWM recovery under "advanced restore" then "restore data" from your CM10.1 nandroid backup)
This way done, you should have all data, wallpaper, widgets and apps like in your CM10.1 right after the reboot. And wait until tomorrow, when the 20130828 nightly gets released. I've been using "buggy" builds (nightlies between 24 and 27 Aug) without any problems, but some people had problems with them.

BSOD on custom rom - [Solved]

On stock V30a (rooted.unrooted no difference) i dont have BSOD. I use AIO-toolkit option 4, repartition new bootloader, installed tonysp CM10.2, 10,1 avatar 10,2 , every rom i get BSOD ? what im doing wrong *
SOLVED - Okay, please apply 2nd core auto hot-plug in Kowalski manager. This has helped others.

g3ar said:
On stock V30a (rooted.unrooted no difference) i dont have BSOD. I use AIO-toolkit option 4, repartition new bootloader, installed tonysp CM10.2, 10,1 avatar 10,2 , every rom i get BSOD ? what im doing wrong *
Click to expand...
Click to collapse
You should consider trying Pengus' CM10 ROM. I don't think you can find more stability in custom ROMs than his
You'll love the ROM, just give it a chance
But remember to do a full wipe (wipe system, data, cache and dalvik) before flashing the ROM.
Edit: You'll also find out bluetooth works perfectly fine on his ROM where the more recent ROMs don't have this fully functional.

So theres no fix type what shoud i do ?
Baseband 1035,21_20121130 . Kernel 2.6.39.4

Strange, BSODs should be a thing of the past. In most cases it was the kernel. Are you sure you flash the latest ROM versions with latest Kowalski kernel? Try to flash KK after ROM. If it doesn't help, phrase describe the problem more thoroughly. When is BSOD happening? During call?
Sent from my LG-P990 using xda app-developers app

So on stock v30a i dont have problems at all. I use aio toolkit option 4 .then install THE ROM tonyp. Bsod happens when i apply charger

Okay, please apply 2nd core auto hot-plug in Kowalski manager. This has helped others.
Sent from my LG-P990 using xda app-developers app

Man it looks like you solved my nightmare ! THANKS

Hi there,having similar problems using cm10.2 and all roms ,When phone times out its battery removal time,hot plug enabled but still turning off!Any help would be much appreciated thanks Glenn

[Q] Choosing the right ROM and Kernel for Samsung GALAXY S GT-I9000

Hi, guys in the next days i think to buy Samsung GALAXY S and i want to update the ROM and the KERNEL i also think when i do that to overclock the CPU a little. Suggestions what rom and kernel to use ? (sorry for my bad english)

MachineZZ said:
Hi, guys in the next days i think to buy Samsung GALAXY S and i want to update the ROM and the KERNEL i also think when i do that to overclock the CPU a little. Suggestions what rom and kernel to use ? (sorry for my bad english)
Click to expand...
Click to collapse
Read this.
If you want a fast device then try Mackay ICS.
For gaming try CyanAOSP (Jelly Bean), CyanAOSP (KitKat).
For customizations try Cyanogenmod or Cyanogenmod based ROMS.
Also Omni is pretty good.

kalpetros said:
Read this.
If you want a fast device then try Mackay ICS.
For gaming try CyanAOSP (Jelly Bean), CyanAOSP (KitKat).
For customizations try Cyanogenmod or Cyanogenmod based ROMS.
Also Omni is pretty good.
Click to expand...
Click to collapse
Thanks! I think to use Semaphore Kernel and CyanAOSP

MachineZZ said:
Thanks! I think to use Semaphore Kernel and CyanAOSP
Click to expand...
Click to collapse
That's a good choice. To take advantage of the Semaphore's kernel features download Semaphore Manager from Play Store.
If you want to overclock your device choose 1.2 MHz and the ondemand Governor. Also for 400+ MB of RAM choose the s Semaphore version and also download the Bigmem libs.

Can i Overclock the cpu more than 1.2Ghz ?
Sent from my PAP3540DUO using XDA Free mobile app

MachineZZ said:
Can i Overclock the cpu more than 1.2Ghz ?
Sent from my PAP3540DUO using XDA Free mobile app
Click to expand...
Click to collapse
Yes you can but not with Semaphore kernel. Mackay kernel supports up to 1.4 MHz.
Keep in mind that with clock speeds over 1.2 MHz you will experience a lot of crashes and reboots, your device will get hot etc.

Now i understood thanks!
Sent from my PAP3540DUO using XDA Free mobile app

When im installing the rom (CyanAOSP) and the kernel (Semaphore) is it need to have installed custom 4.3 or 4.4 ROM first ? Or i can install everyting from the stock rom ?
Sent from my PAP3540DUO using XDA Free mobile app

You might lose your IMEI if you install 4.4 straight from stock. The right way is to install ICS first then JB and finally KK (or you can install KK straight from ICS).

kalpetros said:
You might lose your IMEI if you install 4.4 straight from stock. The right way is to install ICS first then JB and finally KK (or you can install KK straight from ICS).
Click to expand...
Click to collapse
Can i install the the semaphore kernel while im using stock rom or first i need to install CyanAOSP [JB] or Mackay ICS ?

MachineZZ said:
Can i install the the semaphore kernel while im using stock rom or first i need to install CyanAOSP [JB] or Mackay ICS ?
Click to expand...
Click to collapse
Install the ROM first. Make sure to choose the correct Semaphore kernel for your ROM.

Can you tell me what kernel i need for cyanAOSP JB or mackay ics and then i want to install cyanAOSP KK.
Sent from my PAP3540DUO using XDA Free mobile app

MachineZZ said:
Can you tell me what kernel i need for cyanAOSP JB or mackay ics and then i want to install cyanAOSP KK.
Sent from my PAP3540DUO using XDA Free mobile app
Click to expand...
Click to collapse
You only need to flash a kernel once you install the final ROM, in your case KK.

Thanks
Sent from my PAP3540DUO using XDA Free mobile app

be carefull
Hi to all
After to try upgrade my GT-I9000 by KIES (realy bad choice) my phone crash and can't coming back in original without any issues.
I was going and in samsung service to setback but the problems are still there.
Boot freezings and random of sorry the android.process.media has stopped. acore, keybord etc.
I try to fix them first by cache or apps settings but no luck- i was try everything.
Next step for - i had a feeling my phone is not dead and i can't to use it like this - is try to fount a rom in all net.
To many rom's and installs clears with full format or not - with xp,7 or 8 - but all they have same problems (slim,paranoid,etc.). Full of Sorry's that service or other has stop and press the ok every sec.or rom apps crash down or freezings and next black screen or freezing and many reboot's auto.
2 weeks try and try again. It must to save my phone.
And yesterday i try another rom.
1. set (must have) the I9000XXJVU_I9000OXAJVU_OXA by ODIN 1.83 with repartition s1_odin_20100512.pit
1st reboot auto and freezing again (many auto reboots) but final open the phone in settings.I didn't stop so must see the next step
2. Set Kernel by Odin again CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.
The phone reboot but boot over and over without go in. Again i didn't stop so i go in recovery (other way to take the install file) and mount usb (i can't go in phone) and take the ICS_4.0.3_MR1-RC4.2_I9000 rom in internal sd (no external sd and no sim in the phone).
3. Clear the data/factory, reset data cache and dalvic cache and install it (i can say the install it was slowest by the others rom's and more stady in the load bar).
No extra gapps files to install need.
The phone auto reboot and i wait with hope again.
Boom. The phone open in the setting without single problem.:victory:
The Ice Cream Sandwich 4.0 is there all works perfect !!!!!!!!!!!!!
I save my phone and is realy fast because the phone have a realy good hardwear.
So the Final answer is the rom must fit in your phone
I hope to help i wish a nice day to all.

Files ice Cream 4 Samsung GT-I 9000
Need 10 post to upload the links......:crying:

files ice 4.0 by text for SAMSUNG GT-I 9000
lordsaboteur said:
Need 10 post to upload the links......:crying:
Click to expand...
Click to collapse
That is the links by text file just copy and paste in anddress window bronser.