Related
I want to Flash Team ICSSGS [Android 4.0.3] (Link to ROM Thread) but I am not for sure what Bootloaders or Kernel I need to use.
I currently have:
Firmware Version: 2.2
Baseband Version: I897UCKB1
Kernel Version: 2.6.32.9
Build Number: FROYO.UCKB1
In general, the Gingerbread bootloaders are preferred with any of the ICS ROMs, because they are more ubiquitous and can be used with virtually any version 2.1 thru 4.0. Kernel-wise, the ICS ROMs come with a kernel, and your only other option is Glitch v14 beta right now...but mostly, you shouldn't need to worry about flashing anything beyond what's in the ROM itself right now.
WindRunnerXC said:
In general, the Gingerbread bootloaders are preferred with any of the ICS ROMs, because they are more ubiquitous and can be used with virtually any version 2.1 thru 4.0. Kernel-wise, the ICS ROMs come with a kernel, and your only other option is Glitch v14 beta right now...but mostly, you shouldn't need to worry about flashing anything beyond what's in the ROM itself right now.
Click to expand...
Click to collapse
So that ROM I listed in my OP comes with its own Kernel?
And is there a particular Bootloader I should use?
If there is, may you please link me to it?
Hey im currently running the ROM you are asking about. To answer your questions you have to be on the gingerbread bootloaders. You can flash those using odin, or since there is an official update out, use Kies mini to update your phone to gingerbread and that will flash the bootloaders for you.
About the kernel, the ROM you posted includes a kernel in the .zip and when you install the .zip it will flash the kernel for you. Its a fine kernel and works great so dont worry about changing it unless you have problems.
Here is the link on how to flash the bootloaders using Odin. Its not a hard process and pretty safe so let us know how you come out on the other side!
http://forum.xda-developers.com/showthread.php?t=1129821&highlight=gingerbread+bootloader
capocaccia said:
Hey im currently running the ROM you are asking about. To answer your questions you have to be on the gingerbread bootloaders. You can flash those using odin, or since there is an official update out, use Kies mini to update your phone to gingerbread and that will flash the bootloaders for you.
About the kernel, the ROM you posted includes a kernel in the .zip and when you install the .zip it will flash the kernel for you. Its a fine kernel and works great so dont worry about changing it unless you have problems.
Here is the link on how to flash the bootloaders using Odin. Its not a hard process and pretty safe so let us know how you come out on the other side!
http://forum.xda-developers.com/showthread.php?t=1129821&highlight=gingerbread+bootloader
Click to expand...
Click to collapse
Now when I flash this bootloader you listed, will Froyo still boot or will I have to flash my ROM afterwards?
froyo will still boot. GB BL are backwards compatible and the ISCSGS script should allow it to flash over any ROM
Hi all.
as i can't post yet in a thread mentioned by mrnapolean1 (http://forum.xda-developers.com/showthread.php?t=1362092) I'll try to ask my question here, as it related to a question asked by this thread starter
so i have gingerbread 2.3.5, installed CornKernel_UCKK4_v603 and custom rom SimplyStock KK4 V1.0 , so if i wanted to switch Team ICSSGS [Android 4.0.3] should i do following?
1. wipe data /factory reset
2.wipe system
3.flash from recovery mode Android 4.0.3 zip?
I already have a backup made with Efs Pro as a tar file
anything else i need to do?
thank you so much in advance
mrnapolean1 said:
Now when I flash this bootloader you listed, will Froyo still boot or will I have to flash my ROM afterwards?
Click to expand...
Click to collapse
Yes, Froyo will still boot. If this were a layer cake it would go something like bootloader, kernel, rom. So basically, your bootloader has nothing to do with your kernel or your rom but it is at the bottom layer of the boot process. It does effect which ROMs you can use though as gingerbread and ICS roms require GB bootloaders. So flash the bootloaders, you will still be on Froyo. Update to GB. Root GB. Place the ROM on your internal SD and then flash it. If you run into any problems check the common problems page found on the first page of the SGSICS ROM.
gugman said:
Hi all.
as i can't post yet in a thread mentioned by mrnapolean1 (http://forum.xda-developers.com/showthread.php?t=1362092) I'll try to ask my question here, as it related to a question asked by this thread starter
so i have gingerbread 2.3.5, installed CornKernel_UCKK4_v603 and custom rom SimplyStock KK4 V1.0 , so if i wanted to switch Team ICSSGS [Android 4.0.3] should i do following?
1. wipe data /factory reset
2.wipe system
3.flash from recovery mode Android 4.0.3 zip?
I already have a backup made with Efs Pro as a tar file
anything else i need to do?
thank you so much in advance
Click to expand...
Click to collapse
First, if you want to keep any of your apps or contacts backup those as well using Titanium Backup. Make sure to backup to the External SD card or make a copy of the backup somewhere other than the phones internal SD.
Second, you dont have to wipe data/factory reset before you flash. This is only if you have the problem of a bootloop when you try to install. I had this problem and when I did the wipe data afterward it fixed it immediately. So follow this:
1: Boot into CWM
2: install rom
IF you have an issue with a boot loop at this point
1: Get back into CWM using the button combination
2: Wipe data/Factory Rest and Wipe Cach
capocaccia
thank you !
one more question, i understood about data/factory/cash, but dont i need to format system before flashing new rom? i thought its always better to do before new rom flashing?
gugman said:
capocaccia
thank you !
one more question, i understood about data/factory/cash, but dont i need to format system before flashing new rom? i thought its always better to do before new rom flashing?
Click to expand...
Click to collapse
I think this was true when flashing older roms. When I flashed that ROM I did not format system and it worked fine. Let me know if you have any problems when you flash.
capocaccia said:
I think this was true when flashing older roms. When I flashed that ROM I did not format system and it worked fine. Let me know if you have any problems when you flash.
Click to expand...
Click to collapse
i see. okey, thanx a lot again. will be able to flash in about an hour and will let you know
after flashing all went good and phone booted with no problem, except that i don't have a wi-fi, it is connected after typing my password in, wifi icon is on home screen, but could not enter any website or connect to my google account. any ideas?
Try flashing this: http://code.google.com/p/ice-cream-.../detail?name=WifiFix.zip&can=2&q=#makechanges
Sent from my Captivate running Android 4.0.3 ICS
capocaccia said:
Try flashing this: http://code.google.com/p/ice-cream-.../detail?name=WifiFix.zip&can=2&q=#makechanges
Sent from my Captivate running Android 4.0.3 ICS
Click to expand...
Click to collapse
so after flashing that file my phone gives me screen like this
Power Reset or Uknown Upload Mode
and it is stucked. so may i pull the battery off and go to recovery mode again and go back to my previous room? should i perform system format in this case?
Try to reboot. If it won't reboot then ask around in the icssgs Q and A thread.
Sent from my Captivate running Android 4.0.3 ICS
capocaccia said:
Try to reboot. If it won't reboot then ask around in the icssgs Q and A thread.
Sent from my Captivate running Android 4.0.3 ICS
Click to expand...
Click to collapse
with keys+power button combination i've been able to exit that screen and reinstalled 4.0.3
do you know safe way how do i go back to SimplyStock KK4 V1.0? should i first flash CornKernel_UCKK4_v603 with odin? but is it safe to do over android 4.0.3?
sorry for bothering you, but i am kind of stucked
---------- Post added at 02:52 AM ---------- Previous post was at 02:33 AM ----------
ok, in the end managed to boot the phone with working wifi but still would like to know how to flash back to SimplyStock KK4 V1.0, just in case ;-) if that won't be problem for you. thank you !!!
IMHO the best way to go from gingerbread to ics 4.0 is to
- in the development section download stock kk4 without bootloaders, unless you dont have them http://forum.xda-developers.com/showthread.php?t=1300843
- then download a kernel of your choice probably cornkernal and put it on your internal sd card
- download ICS latest build and gapps and put them on your internal sd
- oneclick odin the stock kk4, let it boot up completely
- power off and install kernal via odin without aut reset
- boot into recovery, factory/data reset, clean cache, clear dalvik, install latest ics, then install gapps right after,
- reboot system and youre done.
IF you want to go back to your other rom the simplest way is to just kk4 fresh install, install kernal via odin, then isntall your rom.
I always keep all my contacts synced with gmail, and titanium backup any game data or app data i need, and reinstall apps through the market.
hope this helps
capocaccia said:
Yes, Froyo will still boot. If this were a layer cake it would go something like bootloader, kernel, rom. So basically, your bootloader has nothing to do with your kernel or your rom but it is at the bottom layer of the boot process. It does effect which ROMs you can use though as gingerbread and ICS roms require GB bootloaders. So flash the bootloaders, you will still be on Froyo. Update to GB. Root GB. Place the ROM on your internal SD and then flash it. If you run into any problems check the common problems page found on the first page of the SGSICS ROM.
First, if you want to keep any of your apps or contacts backup those as well using Titanium Backup. Make sure to backup to the External SD card or make a copy of the backup somewhere other than the phones internal SD.
Second, you dont have to wipe data/factory reset before you flash. This is only if you have the problem of a bootloop when you try to install. I had this problem and when I did the wipe data afterward it fixed it immediately. So follow this:
1: Boot into CWM
2: install rom
IF you have an issue with a boot loop at this point
1: Get back into CWM using the button combination
2: Wipe data/Factory Rest and Wipe Cach
Click to expand...
Click to collapse
Now can I go strait from Froyo to the ROM i listed in my OP?
okey, so at the end i decided to switch Doc's Master ICS and so far so good thank you all again for your support !!!!
mrnapolean1 said:
Now can I go strait from Froyo to the ROM i listed in my OP?
Click to expand...
Click to collapse
I gone ahead and flashed ICS onto my phone. It is working good but the Hang up button does not work. In order to hang up, i have to lock it and unlock it.
Now i did a Backup of Froyo from within CWM. if I do have a problem, can i go to DWM and restore the backed up Froyo?
So there's three questions here.
1) What improvements are there in CM9 over the Samsung ICS ROM that really make it stand out and make flashing CM9 worthwhile? What happens to all my apps and are there any killer bugs?
2) How would I go about installing CM9 considering the brick problem with the Samsung ICS ROM?
EDIT:
Some extra information. My Note is an unlocked version purchased from Amazon UK and I have already rooted my device, prior to which I flashed the official ICS ROM using PC Odin.
Liam0102 said:
So there's three questions here.
1) What improvements are there in CM9 over the Samsung ICS ROM that really make it stand out and make flashing CM9 worthwhile.
2) How would I go about installing CM9 considering the brick problem with the Samsung ICS ROM?
EDIT:
Some extra information. My Note is an unlocked version purchased from Amazon UK and I have already rooted my device, prior to which I flashed the official ICS ROM using PC Odin.
Click to expand...
Click to collapse
Samsung ICS and CM9 are two completely different ROMs, CM9 is the pure android experience, No junk, No bloatware, Super fast you really should try it.
However, if you use CM9 you will lose all the S-Pen features and it will become just a normal stylus, You will also lose the S Memo app(s) but there are some alternatives. To install it, Just flash a GB rom via ODIN, Flash abyss kernel and then flash CM9 (you will need to wipe on abyss kernel)
Pretty simple really I have a nandroid of paranoid android and a nandroid of rocketROM, so i can simply flash GB or ICS via ODIN and restore my nandroid, So i can constantly switch between the 2 as im undecided which one i like the most
Losing S-Pen features isn't a big problem as long as it still works as a stylus. My biggest thing is my widgets and apps. Particularly SPlanner. Does CM9 come with a decent calander along with a widget for said calender?
For installation, do I flash the GB ROM with mobile ODIN or PC Odin? And how do I install a kernel?
Sorry I'm new to the whole custom ROM world
Im not sure if the stock calendar will suit your needs but no harm in trying Theres a ton of calendar apps & widgets in the play store so you'll be fine.
As for installation, You can either use Mobile ODIN or PC ODIN, I always use PC ODIN cause i've always used it.
So after you have flashed GB in ODIN, Reboot the phone, Put all the stuff on the SD, then reboot in to download mode
as for kernels, Download this one https://dl.dropbox.com/u/69014495/GingerBread-speedmod-kernel-n7000-k2-12-Odin.tar
Flash it in ODIN (PDA) Then put this one on your SD card along with your CM ROM https://dl.dropbox.com/u/69014495/AbyssNotekernel42RedTouchOriginalLogo.zip and flash it in CWM recovery, reboot recovery (under advanced menu in CWM)
Now find the ROM and flash it Job done !
So step 1) Flash GB with Odin.
step 2) Flash new kernal
step 3)... I'm lost
1) Flash GB
2) Flash Kernel
3) Boot into recovery
4) Flash abyss kernel ( not necessary as there is no brickbug on GB, But it states to use it on the OP of Paranoid Android (CM ROM) )
5) Reboot recovery
6) Wipe and factory reset, Wipe cache + Dalvik cache
7) Flash your CM based ROM
8) Jump for joy
9) Report back saying it worked
All your softwares which are part of Samsung rom will be lost, like S-Memo or the SNote, Splanner, TW launcher etc.
The CM9 roms have their own calendar installed and which also does the work that its supposed to do. With CM9 roms you get lot of options for modification and also as per your liking.
To install - you need to go back to GB roms first. Use the following link
http://forum.xda-developers.com/showthread.php?t=1535025
1. The above link will give you prerooted GB Rom and will also ensure your binary count does not increase. Use PC Odin to flash
2. Download your choice of CM 9 rom like the Original CM9 or Asylum or the Paranoid Android and keep it in your phone's root drive.
3. Download Abyss 4.2 kernel and flash using the Mobile Odin. Reboot to Kernel once installed.
4. Install your selected CM9 variant from your internal storage.
The above steps will help you get CM9. My favourite is Asylum and PA. Asylum for further speed enhancement over CM9 and PA for its Tablet mode.
Hope this helps.
+1 to paranoid android, The hybrid tablet/phone mode is awesome, and it looks really good on the note, Lots of customisation to change DPI too !
Thanks to kailashnj for linking a prerooted GB rom That should save you some time !
azzledazzle said:
1) Flash GB
2) Flash Kernel
3) Boot into recovery
4) Flash abyss kernel ( not necessary as there is no brickbug on GB, But it states to use it on the OP of Paranoid Android (CM ROM) )
5) Reboot recovery
6) Wipe and factory reset, Wipe cache + Dalvik cache
7) Flash your CM based ROM
8) Jump for joy
9) Report back saying it worked
Click to expand...
Click to collapse
How do I do step 6?
Okay, Once you have flashed your kernel, It should inject root + CWM on to the phone, So boot into recovery (volume UP + home + power) then select wipe data / factory reset, After that is done, wipe cache partition, then after that, go to advanced and select clear dalvik cache.
then on to step 7
azzledazzle said:
Okay, Once you have flashed your kernel, It should inject root + CWM on to the phone, So boot into recovery (volume UP + home + power) then select wipe data / factory reset, After that is done, wipe cache partition, then after that, go to advanced and select clear dalvik cache.
then on to step 7
Click to expand...
Click to collapse
Ah ok thanks So flash everything with odin?
GB ROM and kernel yes. The actual cm9 ROM needs to be flashed in recovery.
Sent from my GT-N7000 using xda app-developers app
azzledazzle said:
GB ROM and kernel yes. The actual cm9 ROM needs to be flashed in recovery.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Ah ok The Abyss Kernal is with Odin as well?
no, the abyss kernel is to be flashed in recovery, Well the one i linked you to is anyway. You might not need it, as the speedmod GB kernel is just the same, The brickbug doesnt affect GB users
azzledazzle said:
no, the abyss kernel is to be flashed in recovery, Well the one i linked you to is anyway. You might not need it, as the speedmod GB kernel is just the same, The brickbug doesnt affect GB users
Click to expand...
Click to collapse
Ok thanks The GB ROM has almost finished downloading, I'll post here if I'm successful
you WILL be successful
Well the rooted GB ROM linked, according to Odin, is invalid. So now I'm going to have to download another one.
The one i used is just uploading to dropbox, Il give you the link when its done if you want ? Otherwise go here http://www.sammobile.com and download it
azzledazzle said:
The one i used is just uploading to dropbox, Il give you the link when its done if you want ? Otherwise go here http://www.sammobile.com and download it
Click to expand...
Click to collapse
I got one from Dr. Ketan's thread, if needed I can just root that one. I've got plenty of time on my hands. But thanks for the offer anyway
haha no probs Sometimes old links get damaged and no one notices, So i like to keep all my downloads in dropbox incase someone needs it
I got 25gb free space with my HTC, Plus all the bonus space for referring people lol, I may aswel put it to good use
Hi,
im not pretty sure how to flash safely from my ICS to JB (CM10).
Im on RocketROM ICS XXLPY v3 with the Notecore Kernel.
In the developer threads there is mentioned that you have to upgrade from
CM9 or something like that.
I just want to get sure, before bricking my note .
Hope somebody can explain to me which methods are safe and which not.
Thanks !
Laus007 said:
Hi,
im not pretty sure how to flash safely from my ICS to JB (CM10).
Im on RocketROM ICS XXLPY v3 with the Notecore Kernel.
In the developer threads there is mentioned that you have to upgrade from
CM9 or something like that.
I just want to get sure, before bricking my note .
Hope somebody can explain to me which methods are safe and which not.
Thanks !
Click to expand...
Click to collapse
Details here how to install CM9
http://forum.xda-developers.com/showthread.php?t=1627854
First i get CM9 - 07-31-2012. rom PA 0.5 (Abyss kernel 4.2).
When im on CM9 i do this:
- Download the zip (CM10)
- Download Gapps
- Install the update zip from recovery (internal)
- Install gapps (internal)
- WIPE DATA/FACTORY RESET
- Reboot
- DONE !!!
Laus007 said:
Hi,
im not pretty sure how to flash safely from my ICS to JB (CM10).
Im on RocketROM ICS XXLPY v3 with the Notecore Kernel.
In the developer threads there is mentioned that you have to upgrade from
CM9 or something like that.
I just want to get sure, before bricking my note .
Hope somebody can explain to me which methods are safe and which not.
Thanks !
Click to expand...
Click to collapse
Safe methods:
- Flashing from GB kernel ( for CM9 )
- Flashing from custom / non-stock ICS kernel that had the format command removed
- Flashing from CM9 / CM10 kernels
Brick methods:
- Flashing from anything ICS that came from Samsung
Simply follow the instructions in the thread and you'll be fine.
Check if Notecore kernel is "safe". If it is, you're ready to go. If it's not, you need to flash safe kernel first, and then go for CM10.
If you're afraid or anything, you can always go the long way: stock GB via PC Odin > root > CM9 > CM10, although we should really stop using this method now because devs put a lot of work so that we won't have to do it like that.
Okay.
My way, i would try it:
1. Flash AbyssKernel 4.2 over my ICS RocketROM ICS XXLPY v3.
2. Reboot the recovery
3. Flash CM9 and GApps
4. Factory Reset/Data Wipe
5. Reboot
6. Reboot in Recovery
7. Flash CM10 and GApps
8. Factory Reset/Data Wipe
9. Reboot
The only part, which makes me unsure is "Flashing from anything ICS that came from Samsung". You mean the kernel or could RocketROM brick my note cause its from a samsung firmware ? Even if i flash Abyss before ?
Sorry for asking again, but the Note is a expensive device and I dont want to go back to my Lumia 900
Thank you !
This is my metod. All working good on my N7000
My method:
-Flash CM9 kernel with PC Odin
-Boot into CWM and flash CM10+gapps
-wipe/factory reset and wipe dalvik
done
Before I begin, yes... I did search and look through a few threads with similar titles but did not find my problem.
I am not a phone geek and I am new to all this, but I rooted my Note along with a "Franco kernel", which worked successfully. My phone booted up as it was before (in fact I noticed absolutely no difference in my phone, whatsoever).
The problems begun when I tried to install an "Abyss" kernel via CWM, which apparently installed successfully, but the phone would never get past boot-up (not so successful after all, huh?). I realized that it wasn't going to work, so I though no problem, and went back into CWM and re-installed the Franco kernel that I was using before (which worked). Strangely, this kernel, too, would now no longer boot.
I successfully restored the phone with a GB rom via odin (teriible rom), and proceeded to install the so-called "Hydracore" kernel (love the names) via cwm.... this kernel made things even worse. Once again the installation was supposedly "successful", but the phone doesn't go past boot. This time, it gets stuck on a very dim black screen, which isn't actually black, it is a dark creamy/pink hue that you can only notice in absolute darkness. (WTF?) This screen has random black blotches on it, but again, if you are in a lit up room the screen looks completely black and you cannot tell that it is actually lit. When I say that this kernel made the problems even worse, I say that because when this happens (dim black screen), I cannot even enter CWM recovery at all to try and install a different kernel. From here, I can only access download mode, and have no choice but to restore the phone with the GB rom via odin. I did so, and proceeded to install the latest version of "Hydracore" (v5.4) posted right here on XDA by the member 'chasmodo.' This time, I did the installation of the kernel via odin, which, once again, was supposedly successful... and once again a lie, as the phone just goes into the same black screen, with no option other than download mode.
The sole reason I have wasted hours of my life researching and understanding mobile phone terminology in the past few days is so that I can have jellybean on my Note. It seems that I am unable to do this because the Kernels are not working on my device. I have a very powerful and capable phone, which is currently stuck on this GB rom (which I think has to be the most terrible piece of coding ever made) so any help on this would be immensely appreciated.
Thanks in advance.
can you try go back to stock GB rom.. then upgrade to ICS and root using Dr Ketans method and then install Hydracore
You flashed Hydracore on GB rom? that's the main reason behind your problem, this Kernel is not for GB. Now either flash custom GB kernel or flash stock GB firmware using pc odin and then root it. Check post # 2 in this thread for rooting. (I guess you know how to do this )
Once you have root and cwm recovery, you can flash any custom rom you want.
jeetu1981 said:
You flashed Hydracore on GB rom? that's the main reason behind your problem, this Kernel is not for GB. Now either flash custom GB kernel or flash stock GB firmware using pc odin and then root it. Check post # 2 in this thread for rooting. (I guess you know how to do this )
Once you have root and cwm recovery, you can flash any custom rom you want.
Click to expand...
Click to collapse
Hot damn you guys are quick!
Silly me! :silly:
If I install any GB kernal can I then install CM10?
S-pen said:
Before I begin, yes... I did search and look through a few threads with similar titles but did not find my problem.
I am not a phone geek and I am new to all this, but I rooted my Note along with a "Franco kernel", which worked successfully. My phone booted up as it was before (in fact I noticed absolutely no difference in my phone, whatsoever).
The problems begun when I tried to install an "Abyss" kernel via CWM, which apparently installed successfully, but the phone would never get past boot-up (not so successful after all, huh?). I realized that it wasn't going to work, so I though no problem, and went back into CWM and re-installed the Franco kernel that I was using before (which worked). Strangely, this kernel, too, would now no longer boot.
I successfully restored the phone with a GB rom via odin (teriible rom), and proceeded to install the so-called "Hydracore" kernel (love the names) via cwm.... this kernel made things even worse. Once again the installation was supposedly "successful", but the phone doesn't go past boot. This time, it gets stuck on a very dim black screen, which isn't actually black, it is a dark creamy/pink hue that you can only notice in absolute darkness. (WTF?) This screen has random black blotches on it, but again, if you are in a lit up room the screen looks completely black and you cannot tell that it is actually lit. When I say that this kernel made the problems even worse, I say that because when this happens (dim black screen), I cannot even enter CWM recovery at all to try and install a different kernel. From here, I can only access download mode, and have no choice but to restore the phone with the GB rom via odin. I did so, and proceeded to install the latest version of "Hydracore" (v5.4) posted right here on XDA by the member 'chasmodo.' This time, I did the installation of the kernel via odin, which, once again, was supposedly successful... and once again a lie, as the phone just goes into the same black screen, with no option other than download mode.
The sole reason I have wasted hours of my life researching and understanding mobile phone terminology in the past few days is so that I can have jellybean on my Note. It seems that I am unable to do this because the Kernels are not working on my device. I have a very powerful and capable phone, which is currently stuck on this GB rom (which I think has to be the most terrible piece of coding ever made) so any help on this would be immensely appreciated.
Thanks in advance.
Click to expand...
Click to collapse
Hi there, sorry to hear of your challenges.
One thing to remember before flashing is the nature of safe / unsafe kernels. Equally as important is compatible / non compatible kernels. It's not clear from your post but did you flash Abyss on an ICS ROM? If so, Abyss is a GB kernel. It will install but the ROM wont run due to lack of compatibility.
Abyss is used by many as a Safe kernel, a base to flash a new ROM from . Alternatively, it can be used to "downgrade" to Gingerbread ROMs.
If you are intent on trying a JB ROM, I would suggest a doing a full wipe (use the numerous guides on XDA) and a kernel clean (jBroid Script Cleaner for example). Now, research Chasmodo's excellent Kernel Repository and choose a kernel. Hydracore 4.3 Standard is a good "benchmark" however you could try the Official CM10 kernel from Entropy. Reboot to Recovery and flash your JB ROM of choice.
You will now have "Full Wiped" (including Script Clean), installed a Safe (Compatible) Kernel and flashed a compatible ROM.
For what its worth, I found GB to be an excellent ROM, particularly 2.3.6 and 2.3.7. CheckROM was one of my favorite ROMs on the S2 and they didnt even feel the need (till recently) to make an ICS version.
I hope this helps. Please hit THANKS if it did.
Alba Donzo said:
Hi there, sorry to hear of your challenges.
One thing to remember before flashing is the nature of safe / unsafe kernels. Equally as important is compatible / non compatible kernels. It's not clear from your post but did you flash Abyss on an ICS ROM? If so, Abyss is a GB kernel. It will install but the ROM wont run due to lack of compatibility.
Abyss is used by many as a Safe kernel, a base to flash a new ROM from . Alternatively, it can be used to "downgrade" to Gingerbread ROMs.
If you are intent on trying a JB ROM, I would suggest a doing a full wipe (use the numerous guides on XDA) and a kernel clean (jBroid Script Cleaner for example). Now, research Chasmodo's excellent Kernel Repository and choose a kernel. Hydracore 4.3 Standard is a good "benchmark" however you could try the Official CM10 kernel from Entropy. Reboot to Recovery and flash your JB ROM of choice.
You will now have "Full Wiped" (including Script Clean), installed a Safe (Compatible) Kernel and flashed a compatible ROM.
For what its worth, I found GB to be an excellent ROM, particularly 2.3.6 and 2.3.7. CheckROM was one of my favorite ROMs on the S2 and they didnt even feel the need (till recently) to make an ICS version.
I hope this helps. Please hit THANKS if it did.
Click to expand...
Click to collapse
Yes, I forgot to mention that when I rooted it I was running official 4.0.3 which I got OTA. After I rooted I tried the Abyss kernel. I had read that if you try and install CM10 straight from ICS you can brick, and that you had to downgrade to GB to do this. There must have been a misunderstanding on my part as I though that installing Abyss would downgrade me to GB.
What I don't understand is that I have now installed a GB rom, yet the Abyss gb kernel still does not work.
The two members that posted mentioned that I should root, though I did mention in the OP that it is already rooted... Am I missing something?
Anyway, I want to avoid having to download any more big files. I already have the latest "nightly" build of CM10 in my SD card. Is there any GB kernel that I can install from where I am now that would make it safe to install the CM10 zip?
S-pen said:
Yes, I forgot to mention that when I rooted it I was running official 4.0.3 which I got OTA. After I rooted I tried the Abyss kernel. I had read that if you try and install CM10 straight from ICS you can brick, and that you had to downgrade to GB to do this. There must have been a misunderstanding on my part as I though that installing Abyss would downgrade me to GB.
What I don't understand is that I have now installed a GB rom, yet the Abyss gb kernel still does not work.
The two members that posted mentioned that I should root, though I did mention in the OP that it is already rooted... Am I missing something?
Anyway, I want to avoid having to download any more big files. I already have the latest "nightly" build of CM10 in my SD card. Is there any GB kernel that I can install from where I am now that would make it safe to install the CM10 zip?
Click to expand...
Click to collapse
If I were on a GB ROM and wanted to run CM10 I would Full Wipe (including Cache and Dalvik) then do the following -
Flash Official CM10 kernel.
Reboot to Recovery (do not go straight to ROM flash)
Once back in Recovery, flash the CM10 ROM.
Reboot device.
Alba Donzo said:
If I were on a GB ROM and wanted to run CM10 I would Full Wipe (including Cache and Dalvik) then do the following -
Flash Official CM10 kernel.
Reboot to Recovery (do not go straight to ROM flash)
Once back in Recovery, flash the CM10 ROM.
Reboot device.
Click to expand...
Click to collapse
So the official CM10 kernel is a gb kernel? Because remember that is what I'm currently on.
And just to make sure I got you... wipe everything, install kernel (I don't understand what you mean by "go straight to rom flash"), but then not "reboot system", instead "reboot to recovery", then install CM10 rom?
Also, when you say a "full wipe" do you mean that it will erase everything like a factory reset and delete all my apps and everything else? And is there anyway to install CM10 without doing this or is that the only way?
Cm10 kernel is a jelly bean kernel, so gb rom will not run under it.
Full wipe does mean erasing everything. Coming from gb, there is no other way to install, you need a full wipe, remember, you're updating two full revisions of the os, so it's not surprising a full wipe is needed. If you're worried about your apps, root gb before upgrading and use titanium backup to backup you're apps and then restore them when on cm10.
Sent from my GT-N7000 using xda premium
Alba Donzo said:
If I were on a GB ROM and wanted to run CM10 I would Full Wipe (including Cache and Dalvik) then do the following -
Flash Official CM10 kernel.
Reboot to Recovery (do not go straight to ROM flash)
Once back in Recovery, flash the CM10 ROM.
Reboot device.
Click to expand...
Click to collapse
If you are on rooted GB Rom and want to flash a custom JB or ICS one, this is what you do:
1. drop into recovery
2. do a full wife™ (factory reset, wipe cache and dalvik)
3. flash your JB/ICS Rom
4. reboob
Nothing else is needed, no intermediate steps like flashing another kernel in between, and especially no running Jbroid or Sybr kernel cleaning script.
chasmodo said:
If you are on rooted GB Rom and want to flash a custom JB or ICS one, this is what you do:
1. drop into recovery
2. do a full wife™ (factory reset, wipe cache and dalvik)
3. flash your JB/ICS Rom
4. reboob
Click to expand...
Click to collapse
How original was that....
Sent from my GT-N7000 using xda premium
SpyderTracks said:
If you're worried about your apps, root gb before upgrading and use titanium backup to backup you're apps and then restore them when on cm10.
Click to expand...
Click to collapse
Once again, my phone is already rooted... I have mentioned this several times.
chasmodo said:
If you are on rooted GB Rom and want to flash a custom JB or ICS one, this is what you do:
1. drop into recovery
2. do a full wife™ (factory reset, wipe cache and dalvik)
3. flash your JB/ICS Rom
4. reboob
Nothing else is needed, no intermediate steps like flashing another kernel in between, and especially no running Jbroid or Sybr kernel cleaning script.
Click to expand...
Click to collapse
You telling me that I can safely go straight to JB from my current GB rom and kernel?
I already have a "nightly" JB rom on my SD card, so just to be clear, all I do is go into CWM recovery, do a "full" wipe (how do I do that by the way?) and install the JB rom from zip?
Yes, you can go ahead. Just follow the instructions kindly provided by chasmodo.
But please, do not forget to flash GApps after you flashed the JB "nightly ROM which is on your SD Card". Otherwise you won't have Google account, play store etc yada yada.
Full wipe (aka full-wife™) means wipe data/factory reset. Nothing else.
AA1973 said:
Yes, you can go ahead. Just follow the instructions kindly provided by chasmodo.
But please, do not forget to flash GApps after you flashed the JB "nightly ROM which is on your SD Card". Otherwise you won't have Google account, play store etc yada yada.
Full wipe (aka full-wife™) means wipe data/factory reset. Nothing else.
Click to expand...
Click to collapse
Great! I am downloading the GApps for JB now. How do I install them? I understand that this is also done through CWM recovery, but how do I instal them? do I install the JB rom and reboot to recovery and then just install GApps from zip before rebooting system?
Also, does the full wipe have to be done in CWM recovery, or can I just do the normal wipe on the phone menu before entering recovery?
You flash the ROM by pointing the recovery to the "ROM.zip", the same is valid for "GApps.zip".
So you do the following, no reboot in recovery in between those 2 steps!
Install zip (from where it is located, internal/external SD )
*ROM.zip
*Gapps.zip
*reboot system
Wipe data/factory reset is done (most of the times) in recovery. Just get used to it. Saves you some bad habits on doing it on stock ICS ...
AA1973 said:
You flash the ROM by pointing the recovery to the "ROM.zip", the same is valid for "GApps.zip".
So you do the following, no reboot in recovery in between those 2 steps!
Install zip (from where it is located, internal/external SD )
*ROM.zip
*Gapps.zip
*reboot system
Wipe data/factory reset is done (most of the times) in recovery. Just get used to it. Saves you some bad habits on doing it on stock ICS ...
Click to expand...
Click to collapse
OK install ROM and then install GApps straight away, got it.
Just about the wipe, is it a simple one button wipe that wipes everything, or are there several things that I have to wipe independently? This is the part I'm not too sure about.
Just go into recovery and have a look. I mean, a really close look! Your topic was "need help to install a kernel" not "I don't know how to use recovery and please can someone come over to my place in order to explain me CWM recovery".
Sorry. Everything has been explained. Can't (or rather dont want to) help you further than what has been already mentioned. Period.
AA1973 said:
Just go into recovery and have a look. I mean, a really close look! Your topic was "need help to install a kernel" not "I don't know how to use recovery and please can someone come over to my place in order to explain me CWM recovery".
Sorry. Everything has been explained. Can't (or rather dont want to) help you further than what has been already mentioned. Period.
Click to expand...
Click to collapse
That's fine. I'll go into recovery and have a look. Thanks for the help that you did give anyway.
It worked! I have been messing around with my new Note on Jellybean and looking through all the settings. It doesn't have project butter (or at least the project wasn't very successful), but still miles ahead of Touchwiz.
Just want to extend a big thanks to everyone that has helped me out. Much appreciated.
Hi all,
I know similar questions have been asked literally hundred times, but as a complete noob to roms, I want to make sure that I get a full set of instructions and then I won't brick my phone. I want to upgrade my note to this JB Rom by cronosmachine. I'm on stock ICS 4.0.4. Never rooted or did modding to the phone. No kernel change (which I know nothing about), nothing.
I'm not sure how much info you guys will need but here are the basics:
Baseband version: N7000XXLRB
Kernel version: 3.0. 15-1115729
[email protected] #3
SMP PREEMPT Thu Sep 20 00:40:29 KST 2012
Build number: IMM76D.ZSLPN
I know that I have to first root my phone to get CWM? My guess is to follow method 1 on [24sept12]How to Root/Unroot Samsung Galaxy Note + CWM?
And then from there I don't know what to do in order to get the ROM onto my phone.
And is there anything else I need to be aware of?
Appreciate any kind of help.
yes first root usin 1a method using philz kernel.
Once done, you will have root and cwm and is a safe kernel.
Download the zip file of the rom you want to flash and place it on internal or external sd card.
boot into recovery now (vol up +power+home)
go to mounts and storage
format/system
format/data
format/cache
go to advanced
wipe dalvik cache
go back
install zip.
point to the rom you downloaded.. and wait for it to install. that's all. see your phone booting into jb.
hope that was clear enough
nokiamodeln91 said:
yes first root usin 1a method using philz kernel.
Once done, you will have root and cwm and is a safe kernel.
Download the zip file of the rom you want to flash and place it on internal or external sd card.
boot into recovery now (vol up +power+home)
go to mounts and storage
format/system
format/data
format/cache
go to advanced
wipe dalvik cache
go back
install zip.
point to the rom you downloaded.. and wait for it to install. that's all. see your phone booting into jb.
hope that was clear enough
Click to expand...
Click to collapse
On Phils' post where I can download the rooted kernel, I don't see XXLRB (my baseband version), but I do see a ZSLPN (my build number). Is the ZSLPN the one i'm supposed to download?
rcheung28 said:
On Phils' post where I can download the rooted kernel, I don't see XXLRB (my baseband version), but I do see a ZSLPN (my build number). Is the ZSLPN the one i'm supposed to download?
Click to expand...
Click to collapse
Yes, bas band refers to the modem, Build Number is rom.
Sent from my GT-N7000 using xda premium
Thanks SpyderTracks.
One more question before I pull the trigger, can all this be done with the "internal" SD card? Or does it have to be an external SD?
stock recovery doesnot allow installation from internal SD. so external is required. but you can use PC odin to install it, but it will leave a yellow triangle and increase the counter. later you can use triangle away app to reset it, Final call is yours.,
So after I installed philz's root and safe kernel, I went into recovery to wipe data cache system, went also wiped dalvik. Then I went to the main menu, chose install zip, tried to select choose zip from sdcard, but it keeps giving me this error: E:Can't mount /sdcard/
Nevermind, I managed to install from internal SD. But I'm not liking the ROM that much, so I plan on flashing CM10 Nightly to try it out.
On the CM10 thread, it says that I shouldn't be on a ROM based on stock. What I want to do is to flash CM9. But in order to do that, I'm not sure if I'm already on a safe kernel (after rooting using dr.ketan's 1a method (Phil's)).
what rom are you on now?
nokiamodeln91 said:
what rom are you on now?
Click to expand...
Click to collapse
I'm on this rom, it's a tw based rom based on the leaked jb ls7?
I am not sure what kernel it has. boot into recovery and check what you see.. If it's philz the you can just flash the cm10 on it. else. install philz xxls7
nokiamodeln91 said:
I am not sure what kernel it has. boot into recovery and check what you see.. If it's philz the you can just flash the cm10 on it. else. install philz xxls7
Click to expand...
Click to collapse
I'm not sure either, I booted into recovery, went into Philz Settings > about, and got CWM base 6.0.1.5, and PhilZ Touch 3.00 (n7000).
And what you're saying is that if I'm on Philz xxls7 kernel, I can go right to flashing CM10, without worrying the "do not flash on stock based ICS fw" (even though I'm on jb)?
Yes.. you are on philz kernel and you can directly install CM10
nokiamodeln91 said:
Yes.. you are on philz kernel and you can directly install CM10
Click to expand...
Click to collapse
Thanks for the information. But I want to know what makes my case an exception from
- Make sure to run CM9 or an AOSP-based ROM : FLASHING FROM STOCK ICS OR ROMS BASED ON STOCK ICS WILL RESULT IN A BRICK! - You're warned!
Click to expand...
Click to collapse
.
I'm on a JB rom but it's based on stock, isn't that essentially the same as based on stock ICS?
the warning was when the safe ics kernels were not in effect.
nokiamodeln91 said:
the warning was when the safe ics kernels were not in effect.
Click to expand...
Click to collapse
Thanks for the quick reply!! When I get home, I'll try this out!
So what I need to do is
put the zip files onto my SD,
reboot into recovery,
install the rom,
install google apps,
wipe data,
factory reset,
reboot into cm10
I don't need to wipe system/cache/dalvik??
once in recovery
mounts & storage
format/system & data & cache
then install rom & gapps
nokiamodeln91 said:
once in recovery
mounts & storage
format/system & data & cache
then install rom & gapps
Click to expand...
Click to collapse
Thanks a lot for guiding me through this, everything worked out perfectly!
great. now enjoy the cm10..:thumbup::thumbup::thumbup:
How come even after I performed format system cache data dalvik, some of the settings are still left on the phone? e.g. previously saved wireless networks, wallpapers... How can I completely start from scratch?