Database Develop

[MOD] status bar bluetooth/silent toggles improved - update 10/23/2010

s0niqu3 brought it to my attention how much the status bar bluetooth toggle
sucked so I changed the onClick method to toggle the bluetooth state instead
of opening settings to the bluetooth page
this is the replacement method for com/android/server/status/StatusBarService$31
which is in the services file in framework.
Code:
.method public onClick(Landroid/view/View;)V
.registers 7
.parameter "v"
.prologue
const-string v1, "StatusBar"
iget-object v3, p0, Lcom/android/server/status/StatusBarService$31;->this$0:Lcom/android/server/status/StatusBarService;
iget-object v3, v3, Lcom/android/server/status/StatusBarService;->mContentResolver:Landroid/content/ContentResolver;
const-string v4, "airplane_mode_on"
const/4 v5, 0x0
invoke-static {v3, v4, v5}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v2
if-nez v2, :exit
invoke-static {}, Landroid/bluetooth/BluetoothAdapter;->getDefaultAdapter()Landroid/bluetooth/BluetoothAdapter;
move-result-object v0
if-eqz v0, :exit
const/4 v5, 0x1
const-string v3, "bluetooth"
invoke-static {v3}, Landroid/os/ServiceManager;->checkService(Ljava/lang/String;)Landroid/os/IBinder;
move-result-object v3
invoke-static {v3}, Landroid/bluetooth/IBluetooth$Stub;->asInterface(Landroid/os/IBinder;)Landroid/bluetooth/IBluetooth;
move-result-object v2
invoke-interface {v2}, Landroid/bluetooth/IBluetooth;->getBluetoothState()I
move-result v3
const/16 v4, 0xc
if-ne v3, v4, :toggleOn
:toggleOff
const-string v4, "Disabling Bluetooth"
invoke-static {v1, v4}, Landroid/util/Log;->w(Ljava/lang/String;Ljava/lang/String;)I
invoke-interface {v2, v5}, Landroid/bluetooth/IBluetooth;->disable(Z)Z
goto :exit
:toggleOn
const/16 v4, 0xa
if-ne v3, v4, :exit
const-string v4, "Enabling Bluetooth"
invoke-static {v1, v4}, Landroid/util/Log;->w(Ljava/lang/String;Ljava/lang/String;)I
invoke-interface {v2, v5}, Landroid/bluetooth/IBluetooth;->enable(Z)Z
:exit
return-void
.end method
I added flashables to this post use the stock updater to install, these should
be compatible with any JI6 based ROM because I don't think there are a lot
of mods for /system/framework/services.*. I also killed the battery full notification.
EDIT:
added 3 state toggle to the silent button so now you can toggle from Ringer on --> Vibrate --> Silent
below is the replacement onClick method com/android/server/status/StatusBarService$33
which is in the services file in framework.
Code:
.method public onClick(Landroid/view/View;)V
.registers 7
.parameter "v"
.prologue
const/4 v2, 0x0
const/4 v3, 0x1
const/4 v4, 0x2
.line 3641
iget-object v0, p0, Lcom/android/server/status/StatusBarService$33;->this$0:Lcom/android/server/status/StatusBarService;
iget-boolean v0, v0, Lcom/android/server/status/StatusBarService;->mSilentStatus:Z
if-nez v0, :cond_10
.line 3642
iget-object v0, p0, Lcom/android/server/status/StatusBarService$33;->this$0:Lcom/android/server/status/StatusBarService;
iget-object v0, v0, Lcom/android/server/status/StatusBarService;->mContentResolver:Landroid/content/ContentResolver;
const-string v1, "driving_mode_on"
invoke-static {v0, v1, v2}, Landroid/provider/Settings$System;->putInt(Landroid/content/ContentResolver;Ljava/lang/String;I)Z
.line 3646
:cond_10
iget-object v0, p0, Lcom/android/server/status/StatusBarService$33;->this$0:Lcom/android/server/status/StatusBarService;
iget-object v0, v0, Lcom/android/server/status/StatusBarService;->mContext:Landroid/content/Context;
const-string v1, "audio"
invoke-virtual {v0, v1}, Landroid/content/Context;->getSystemService(Ljava/lang/String;)Ljava/lang/Object;
move-result-object v0
check-cast v0, Landroid/media/AudioManager;
iget-object v1, p0, Lcom/android/server/status/StatusBarService$33;->this$0:Lcom/android/server/status/StatusBarService;
iget v1, v1, Lcom/android/server/status/StatusBarService;->mSoundProfile:I
if-eqz v1, :ringerOn
if-eq v1, v4, :vibrate
if-eq v1, v3, :ringerOff
:ringerOn
move v1, v4
:goto_23
invoke-virtual {v0, v1}, Landroid/media/AudioManager;->setRingerMode(I)V
.line 3648
return-void
:ringerOff
move v1, v2
goto :goto_23
:vibrate
iget-object v1, p0, Lcom/android/server/status/StatusBarService$33;->this$0:Lcom/android/server/status/StatusBarService;
iget-object v1, v1, Lcom/android/server/status/StatusBarService;->mContext:Landroid/content/Context;
const-string v2, "vibrator"
invoke-virtual {v1, v2}, Landroid/content/Context;->getSystemService(Ljava/lang/String;)Ljava/lang/Object;
move-result-object v1
check-cast v1, Landroid/os/Vibrator;
const-wide/16 v2, 0x32
invoke-virtual {v1, v2, p3}, Landroid/os/Vibrator;->vibrate(J)V
const/4 v1, 0x1
goto :goto_23
.end method
replacement method for StatusBarService.smali, this enables the 3 icons for the silent button.
you also have to add the image resource to twframework-res.apk and a line in public.xml
Code:
<public type="drawable" name="quick_panel_icon_vibrate" id="0x020200d8" />
Code:
.method private prepareQuickPanelSettingIcon(I)V
.registers 7
.parameter "mask"
.prologue
.line 1344
const/4 v2, 0x0
.line 1345
.local v2, textColor:I
const/4 v0, 0x0
.line 1346
.local v0, btnTextView:Landroid/widget/TextView;
const/4 v1, 0x0
.line 1348
.local v1, settingIcon:Landroid/graphics/drawable/Drawable;
packed-switch p1, :pswitch_data_c6
.line 1400
:goto_6
:pswitch_6
invoke-direct {p0, v0, v1, v2}, Lcom/android/server/status/StatusBarService;->updateQuickPanelSettingIcon(Landroid/widget/TextView;Landroid/graphics/drawable/Drawable;I)V
.line 1401
return-void
.line 1350
:pswitch_a
iget-object v0, p0, Lcom/android/server/status/StatusBarService;->mWiFiBtn:Landroid/widget/TextView;
.line 1352
iget-boolean v3, p0, Lcom/android/server/status/StatusBarService;->mWiFiStatus:Z
if-eqz v3, :cond_2a
.line 1353
iget-object v3, p0, Lcom/android/server/status/StatusBarService;->mContext:Landroid/content/Context;
invoke-virtual {v3}, Landroid/content/Context;->getResources()Landroid/content/res/Resources;
move-result-object v3
const v4, 0x2020062
invoke-virtual {v3, v4}, Landroid/content/res/Resources;->getDrawable(I)Landroid/graphics/drawable/Drawable;
move-result-object v1
.line 1354
const v2, -0xff8b34
.line 1355
iget-object v3, p0, Lcom/android/server/status/StatusBarService;->mWiFiBtn:Landroid/widget/TextView;
const-string v4, "WI-FI(ON)"
invoke-virtual {v3, v4}, Landroid/widget/TextView;->setText(Ljava/lang/CharSequence;)V
.line 1360
:goto_27
iget-object v0, p0, Lcom/android/server/status/StatusBarService;->mWiFiBtn:Landroid/widget/TextView;
.line 1361
goto :goto_6
.line 1357
:cond_2a
iget-object v3, p0, Lcom/android/server/status/StatusBarService;->mContext:Landroid/content/Context;
invoke-virtual {v3}, Landroid/content/Context;->getResources()Landroid/content/res/Resources;
move-result-object v3
const v4, 0x202005f
invoke-virtual {v3, v4}, Landroid/content/res/Resources;->getDrawable(I)Landroid/graphics/drawable/Drawable;
move-result-object v1
.line 1358
const/4 v2, -0x1
goto :goto_27
.line 1364
:pswitch_39
iget-object v0, p0, Lcom/android/server/status/StatusBarService;->mBTBtn:Landroid/widget/TextView;
.line 1366
iget-boolean v3, p0, Lcom/android/server/status/StatusBarService;->mBTStatus:Z
if-eqz v3, :cond_50
.line 1367
iget-object v3, p0, Lcom/android/server/status/StatusBarService;->mContext:Landroid/content/Context;
invoke-virtual {v3}, Landroid/content/Context;->getResources()Landroid/content/res/Resources;
move-result-object v3
const v4, 0x202005d
invoke-virtual {v3, v4}, Landroid/content/res/Resources;->getDrawable(I)Landroid/graphics/drawable/Drawable;
move-result-object v1
.line 1368
const v2, -0xff8b34
goto :goto_6
.line 1370
:cond_50
iget-object v3, p0, Lcom/android/server/status/StatusBarService;->mContext:Landroid/content/Context;
invoke-virtual {v3}, Landroid/content/Context;->getResources()Landroid/content/res/Resources;
move-result-object v3
const v4, 0x202005c
invoke-virtual {v3, v4}, Landroid/content/res/Resources;->getDrawable(I)Landroid/graphics/drawable/Drawable;
move-result-object v1
.line 1371
const/4 v2, -0x1
.line 1373
goto :goto_6
.line 1376
:pswitch_5f
iget-object v0, p0, Lcom/android/server/status/StatusBarService;->mSoundBtn:Landroid/widget/TextView;
.line 1378
iget v3, p0, Lcom/android/server/status/StatusBarService;->mSoundProfile:I
const/4 v2, 0x2
if-eq v3, v2, :cond_8c
const/4 v2, 0x1
if-eq v3, v2, :cond_7a
.line 1379
iget-object v3, p0, Lcom/android/server/status/StatusBarService;->mContext:Landroid/content/Context;
invoke-virtual {v3}, Landroid/content/Context;->getResources()Landroid/content/res/Resources;
move-result-object v3
const v4, 0x20200b3
invoke-virtual {v3, v4}, Landroid/content/res/Resources;->getDrawable(I)Landroid/graphics/drawable/Drawable;
move-result-object v1
.line 1380
const v2, -0xff8b34
goto :goto_6
:cond_7a
iget-object v3, p0, Lcom/android/server/status/StatusBarService;->mContext:Landroid/content/Context;
invoke-virtual {v3}, Landroid/content/Context;->getResources()Landroid/content/res/Resources;
move-result-object v3
const v4, 0x20200d8
invoke-virtual {v3, v4}, Landroid/content/res/Resources;->getDrawable(I)Landroid/graphics/drawable/Drawable;
move-result-object v1
.line 1380
const v2, -0xff8b34
goto/16 :goto_6
.line 1382
:cond_8c
iget-object v3, p0, Lcom/android/server/status/StatusBarService;->mContext:Landroid/content/Context;
invoke-virtual {v3}, Landroid/content/Context;->getResources()Landroid/content/res/Resources;
move-result-object v3
const v4, 0x20200b2
invoke-virtual {v3, v4}, Landroid/content/res/Resources;->getDrawable(I)Landroid/graphics/drawable/Drawable;
move-result-object v1
.line 1383
const/4 v2, -0x1
.line 1385
goto/16 :goto_6
.line 1388
:pswitch_9c
iget-object v0, p0, Lcom/android/server/status/StatusBarService;->mGpsBtn:Landroid/widget/TextView;
.line 1390
iget-boolean v3, p0, Lcom/android/server/status/StatusBarService;->mGpsStatus:Z
if-eqz v3, :cond_b4
.line 1391
iget-object v3, p0, Lcom/android/server/status/StatusBarService;->mContext:Landroid/content/Context;
invoke-virtual {v3}, Landroid/content/Context;->getResources()Landroid/content/res/Resources;
move-result-object v3
const v4, 0x202005e
invoke-virtual {v3, v4}, Landroid/content/res/Resources;->getDrawable(I)Landroid/graphics/drawable/Drawable;
move-result-object v1
.line 1392
const v2, -0xff8b34
goto/16 :goto_6
.line 1394
:cond_b4
iget-object v3, p0, Lcom/android/server/status/StatusBarService;->mContext:Landroid/content/Context;
invoke-virtual {v3}, Landroid/content/Context;->getResources()Landroid/content/res/Resources;
move-result-object v3
const v4, 0x20200b4
invoke-virtual {v3, v4}, Landroid/content/res/Resources;->getDrawable(I)Landroid/graphics/drawable/Drawable;
move-result-object v1
.line 1395
const/4 v2, -0x1
goto/16 :goto_6
.line 1348
nop
nop
:pswitch_data_c6
.packed-switch 0x1
:pswitch_a
:pswitch_39
:pswitch_6
:pswitch_5f
:pswitch_6
:pswitch_6
:pswitch_6
:pswitch_9c
.end packed-switch
.end method

Sounds great, one less widget I will have to use, any way someone could make it a flashable zip so us none coders can use it?

I added flashables to this thread use the stock updater to install, these should
be compatible with any JI6 based ROM because I don't think there are a lot
of mods for /system/framework/services.*. I also killed the battery full notification.
which I don't think any one will miss.

untermensch said:
s0niqu3 brought it to my attention how much the status bar bluetooth toggle
sucked so I changed the onClick method to toggle the bluetooth state instead
of opening settings to the bluetooth page
this is the replacement method for com/android/server/status/StatusBarService$31
which is in the services file in framework.
Code:
.method public onClick(Landroid/view/View;)V
.registers 7
.parameter "v"
.prologue
const-string v1, "StatusBar"
iget-object v3, p0, Lcom/android/server/status/StatusBarService$31;->this$0:Lcom/android/server/status/StatusBarService;
iget-object v3, v3, Lcom/android/server/status/StatusBarService;->mContentResolver:Landroid/content/ContentResolver;
const-string v4, "airplane_mode_on"
const/4 v5, 0x0
invoke-static {v3, v4, v5}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v2
if-nez v2, :exit
invoke-static {}, Landroid/bluetooth/BluetoothAdapter;->getDefaultAdapter()Landroid/bluetooth/BluetoothAdapter;
move-result-object v0
if-eqz v0, :exit
const/4 v5, 0x1
const-string v3, "bluetooth"
invoke-static {v3}, Landroid/os/ServiceManager;->checkService(Ljava/lang/String;)Landroid/os/IBinder;
move-result-object v3
invoke-static {v3}, Landroid/bluetooth/IBluetooth$Stub;->asInterface(Landroid/os/IBinder;)Landroid/bluetooth/IBluetooth;
move-result-object v2
invoke-interface {v2}, Landroid/bluetooth/IBluetooth;->getBluetoothState()I
move-result v3
const/16 v4, 0xc
if-ne v3, v4, :toggleOn
:toggleOff
const-string v4, "Disabling Bluetooth"
invoke-static {v1, v4}, Landroid/util/Log;->w(Ljava/lang/String;Ljava/lang/String;)I
invoke-interface {v2, v5}, Landroid/bluetooth/IBluetooth;->disable(Z)Z
goto :exit
:toggleOn
const/16 v4, 0xa
if-ne v3, v4, :exit
const-string v4, "Enabling Bluetooth"
invoke-static {v1, v4}, Landroid/util/Log;->w(Ljava/lang/String;Ljava/lang/String;)I
invoke-interface {v2, v5}, Landroid/bluetooth/IBluetooth;->enable(Z)Z
:exit
return-void
.end method
I added flashables to this post use the stock updater to install, these should
be compatible with any JI6 based ROM because I don't think there are a lot
of mods for /system/framework/services.*. I also killed the battery full notification.
Click to expand...
Click to collapse
Thanks again for everything you've done, glad to have so many annoying samsung bugs fixed by such awesome people in the community.
Cheers, =)

Thanks for a fix to a very annoying issue. Noob question: which of these would I use with the Bionix. ROMs?
Sent from my SGH-T959 using XDA App

murse said:
Thanks for a fix to a very annoying issue. Noob question: which of these would I use with the Bionix. ROMs?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Hi,
I can't guarantee anything, but always try the JI6 deodexed version on the bionix roms first.
Cheers, =)

Not sure why but JI6 deodexed would not install in clockwork, just got stuck saying installing update, So i just had to just pull the services.jar and use root explorer and pasted it in system/framework. It hung when restarting, but then I rebooted into recovery wiped both caches and that fixed the hang issue. Works great thanks for this. One of these days I will learn some coding stuff so i can do it myself.
For those interested, that is what i had to do to get it to work on fusion1.1 with the King Klicks Kernel.

mikey98277 said:
Not sure why but it would not install in clockwork, just got stuck saying installing update, So i just had to just pull the services.jar and use root explorer and pasted it in system/framework. It hung when restarting, but then I rebooted into recovery wiped both caches and that fixed the hang issue. Works great thanks for this. One of these days I will learn some coding stuff so i can do it myself.
For those interested, that is what i had to do to get it to work on fusion1.1 with the King Klicks Kernel.
Click to expand...
Click to collapse
FYI, the flashable update.zip is in the download file.
EDIT: Just installed on Bionix FINAL and the bluetooth status update works great. Nice addition. Haven't tried to charge 100%, but I certainly won't miss that notification. Thanks untermensch for all of your mods!!!

a400meter said:
FYI, the flashable update.zip is in the download file.
Not sure what you meant by that, As I said I tried the update.zip file and it did not work on Fusion 1.1 with KK Kernel. So I pulled the file from it and pushed it manually.
Click to expand...
Click to collapse

mikey98277 said:
a400meter said:
FYI, the flashable update.zip is in the download file.
Not sure what you meant by that, As I said I tried the update.zip file and it did not work on Fusion 1.1 with KK Kernel. So I pulled the file from it and pushed it manually.
Click to expand...
Click to collapse
What that means is that the update.zip file that is located inside the zip you downloaded is not meant to be installed through clockwork, but instead through the stock phone recovery menu. Replace the clockwork update.zip on your internal memory with the downloaded one, and then go to the phone recovery and hit "Reinstall Packages".
I know you already installed the file manually, the clarification is more for others who may need help.
Click to expand...
Click to collapse

untermensch said:
s0niqu3 brought it to my attention how much the status bar bluetooth toggle
sucked so I changed the onClick method to toggle the bluetooth state instead
of opening settings to the bluetooth page
this is the replacement method for com/android/server/status/StatusBarService$31
which is in the services file in framework.
Code:
.method public onClick(Landroid/view/View;)V
.registers 7
.parameter "v"
.prologue
const-string v1, "StatusBar"
iget-object v3, p0, Lcom/android/server/status/StatusBarService$31;->this$0:Lcom/android/server/status/StatusBarService;
iget-object v3, v3, Lcom/android/server/status/StatusBarService;->mContentResolver:Landroid/content/ContentResolver;
const-string v4, "airplane_mode_on"
const/4 v5, 0x0
invoke-static {v3, v4, v5}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v2
if-nez v2, :exit
invoke-static {}, Landroid/bluetooth/BluetoothAdapter;->getDefaultAdapter()Landroid/bluetooth/BluetoothAdapter;
move-result-object v0
if-eqz v0, :exit
const/4 v5, 0x1
const-string v3, "bluetooth"
invoke-static {v3}, Landroid/os/ServiceManager;->checkService(Ljava/lang/String;)Landroid/os/IBinder;
move-result-object v3
invoke-static {v3}, Landroid/bluetooth/IBluetooth$Stub;->asInterface(Landroid/os/IBinder;)Landroid/bluetooth/IBluetooth;
move-result-object v2
invoke-interface {v2}, Landroid/bluetooth/IBluetooth;->getBluetoothState()I
move-result v3
const/16 v4, 0xc
if-ne v3, v4, :toggleOn
:toggleOff
const-string v4, "Disabling Bluetooth"
invoke-static {v1, v4}, Landroid/util/Log;->w(Ljava/lang/String;Ljava/lang/String;)I
invoke-interface {v2, v5}, Landroid/bluetooth/IBluetooth;->disable(Z)Z
goto :exit
:toggleOn
const/16 v4, 0xa
if-ne v3, v4, :exit
const-string v4, "Enabling Bluetooth"
invoke-static {v1, v4}, Landroid/util/Log;->w(Ljava/lang/String;Ljava/lang/String;)I
invoke-interface {v2, v5}, Landroid/bluetooth/IBluetooth;->enable(Z)Z
:exit
return-void
.end method
I added flashables to this post use the stock updater to install, these should
be compatible with any JI6 based ROM because I don't think there are a lot
of mods for /system/framework/services.*. I also killed the battery full notification.
Click to expand...
Click to collapse
First of all, great work with this fix.
Is there any way that this method could be used to change the Silent shortcut to a Vibrate shortcut? I'm not sure about others, but I personally never use Silent mode, and it bugs the hell out of me that it's so easily accessible yet useless for me.

gilbar said:
mikey98277 said:
What that means is that the update.zip file that is located inside the zip you downloaded is not meant to be installed through clockwork, but instead through the stock phone recovery menu. Replace the clockwork update.zip on your internal memory with the downloaded one, and then go to the phone recovery and hit "Reinstall Packages".
I know you already installed the file manually, the clarification is more for others who may need help.
Click to expand...
Click to collapse
ahh... i get it now, maybe thats why it didnt work, well I got it going anyways thanks.
Click to expand...
Click to collapse

So the deodexed one should work fine with Eugene's frankin final?

Thanks, this makes life easier.
I used RootExplorer to copy your services.odex into android's /system/framework folder. Painless and it works perfectly.
I wish the notification bar had the option to enable/disable TV out.

Thanks for this - works well to turn BT off, but to turn on it's very slow. Is that just me?

Turns on or off in less than 2 or 3 seconds here.

Colt1911 said:
Turns on or off in less than 2 or 3 seconds here.
Click to expand...
Click to collapse
Wow, that's instant compared to my phone.
My phone takes usually 10-11 seconds to turn on bluetooth, and that's totally independent of how I go about turning it on. If I use the notification toggle, or turn on directly from the settings menu, or use the default android power control widget, they all take 10-11 seconds to turn on bluetooth.
So, my guess is that maybe bluetooth on/off speed is affected by custom kernels or custom roms, or a combination of both and still unknown factors.
Honestly, I don't really mind how long it takes, I don't use bluetooth all that often, but the few times I do, the toggle has always annoyed me that it just opened bluetooth settings, so this mod is perfect for me.
Thanks again, cheers everyone, =)

s0niqu3 said:
Wow, that's instant compared to my phone.
My phone takes usually 10-11 seconds to turn on bluetooth, and that's totally independent of how I go about turning it on. If I use the notification toggle, or turn on directly from the settings menu, or use the default android power control widget, they all take 10-11 seconds to turn on bluetooth.
So, my guess is that maybe bluetooth on/off speed is affected by custom kernels or custom roms, or a combination of both and still unknown factors.
Honestly, I don't really mind how long it takes, I don't use bluetooth all that often, but the few times I do, the toggle has always annoyed me that it just opened bluetooth settings, so this mod is perfect for me.
Thanks again, cheers everyone, =)
Click to expand...
Click to collapse
I have the same issue, and it started exactly when i started installing Bionix ROMs on both my phone and my wife's. I figured it was something about how he built his ROM, and just deided to live with it. It could either be Bionix orJAC. I havent tried Bionix with stock kernel to try and troubleshoot.

I updated the OP files, you can now toggle from Ringer On --> Vibrate --> Silent
seems like the button icon should be changed to 3 state also for a more finished
look.

untermensch said:
I updated the OP files, you can now toggle from Ringer On --> Vibrate --> Silent
seems like the button icon should be changed to 3 state also for a more finished
look.
Click to expand...
Click to collapse
Sounds great, thanks!
Would you mind posting the code to make the silent/vibrate change manually?
Thanks again, cheers, =)

[FIX] [2.2.1 JS5] Stop signal bars from disappearing!

Decided I'd dive into this and miraculously got it working!
The problem is in the method updateSignalStrength()
I was using original Vibrant, Vibrant 4G, & JS5 files to compare and found the fix. From what I can tell it seems to happen when the phone tries to check if it's roaming, it seems to mess up... right around line 5333
Code:
iget-object v2, p0, Lcom/android/server/status/StatusBarPolicy;->mPhone:Landroid/telephony/TelephonyManager;
is where it starts messing up.
Here's the diff comparison picture between new code and old
(upon further inspection I'm not sure if the one on the right is the original or an earlier modified version of the file... I included the whole method so you guys can diff it if you want)
I could have probably cleaned up the code more but it works so I didn't want to mess it up further lol.
Anyhow here's the code for the new method
Code:
.method private final updateSignalStrength()V
.registers 7
.prologue
const/4 v5, 0x0
.line 1278
const/4 v0, -0x1
.line 1282
.local v0, iconLevel:I
invoke-direct {p0}, Lcom/android/server/status/StatusBarPolicy;->hasService()Z
move-result v2
if-nez v2, :cond_3d
iget-object v2, p0, Lcom/android/server/status/StatusBarPolicy;->mServiceState:Landroid/telephony/ServiceState;
if-eqz v2, :cond_3d
iget-object v2, p0, Lcom/android/server/status/StatusBarPolicy;->mServiceState:Landroid/telephony/ServiceState;
invoke-virtual {v2}, Landroid/telephony/ServiceState;->isEmergencyOnly()Z
move-result v2
if-nez v2, :cond_3d
.line 1284
iget-object v2, p0, Lcom/android/server/status/StatusBarPolicy;->mContext:Landroid/content/Context;
invoke-virtual {v2}, Landroid/content/Context;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v2
const-string v3, "airplane_mode_on"
const/4 v4, 0x0
invoke-static {v2, v3, v4}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v2
const/4 v3, 0x1
if-ne v2, v3, :cond_35
.line 1286
iget-object v2, p0, Lcom/android/server/status/StatusBarPolicy;->mPhoneData:Lcom/android/server/status/IconData;
const v3, 0x10802e9
iput v3, v2, Lcom/android/server/status/IconData;->iconId:I
.line 1290
:goto_2b
iget-object v2, p0, Lcom/android/server/status/StatusBarPolicy;->mService:Lcom/android/server/status/StatusBarService;
iget-object v3, p0, Lcom/android/server/status/StatusBarPolicy;->mPhoneIcon:Landroid/os/IBinder;
iget-object v4, p0, Lcom/android/server/status/StatusBarPolicy;->mPhoneData:Lcom/android/server/status/IconData;
invoke-virtual {v2, v3, v4, v5}, Lcom/android/server/status/StatusBarService;->updateIcon(Landroid/os/IBinder;Lcom/android/server/status/IconData;Lcom/android/server/status/NotificationData;)V
.line 1334
:goto_34
return-void
.line 1288
:cond_35
iget-object v2, p0, Lcom/android/server/status/StatusBarPolicy;->mPhoneData:Lcom/android/server/status/IconData;
const v3, 0x10802ea
iput v3, v2, Lcom/android/server/status/IconData;->iconId:I
goto :goto_2b
.line 1294
:cond_3d
invoke-direct {p0}, Lcom/android/server/status/StatusBarPolicy;->isCdma()Z
move-result v2
if-nez v2, :cond_66
.line 1296
iget-object v2, p0, Lcom/android/server/status/StatusBarPolicy;->mSignalStrength:Landroid/telephony/SignalStrength;
invoke-virtual {v2}, Landroid/telephony/SignalStrength;->getGsmSignalBar()I
move-result v0
.line 1312
#iget-object v2, p0, Lcom/android/server/status/StatusBarPolicy;->mPhone:Landroid/telephony/TelephonyManager;
#invoke-virtual {v2}, Landroid/telephony/TelephonyManager;->isNetworkRoaming()Z
.line 1367
const/4 v2, 0x5
if-ne v0, v2, :cond_4d
const/4 v0, 0x4
.line 1397
:cond_4d
sget-object v1, Lcom/android/server/status/StatusBarPolicy;->sSignalImages:[I
.line 1415
.local v1, iconList:[I
:goto_53
iget-object v2, p0, Lcom/android/server/status/StatusBarPolicy;->mPhoneData:Lcom/android/server/status/IconData;
aget v3, v1, v0
iput v3, v2, Lcom/android/server/status/IconData;->iconId:I
.line 1416
iget-object v2, p0, Lcom/android/server/status/StatusBarPolicy;->mService:Lcom/android/server/status/StatusBarService;
iget-object v3, p0, Lcom/android/server/status/StatusBarPolicy;->mPhoneIcon:Landroid/os/IBinder;
iget-object v4, p0, Lcom/android/server/status/StatusBarPolicy;->mPhoneData:Lcom/android/server/status/IconData;
invoke-virtual {v2, v3, v4, v5}, Lcom/android/server/status/StatusBarService;->updateIcon(Landroid/os/IBinder;Lcom/android/server/status/IconData;Lcom/android/server/status/NotificationData;)V
goto :goto_34
.line 1401
.end local v1 #iconList:[I
:cond_66
sget-object v1, Lcom/android/server/status/StatusBarPolicy;->sSignalImages:[I
.line 1406
.restart local v1 #iconList:[I
iget v2, p0, Lcom/android/server/status/StatusBarPolicy;->mPhoneState:I
if-nez v2, :cond_77
invoke-direct {p0}, Lcom/android/server/status/StatusBarPolicy;->isEvdo()Z
move-result v2
if-eqz v2, :cond_77
.line 1324
invoke-direct {p0}, Lcom/android/server/status/StatusBarPolicy;->getEvdoLevel()I
move-result v0
goto :goto_53
.line 1329
:cond_77
invoke-direct {p0}, Lcom/android/server/status/StatusBarPolicy;->getCdmaLevel()I
move-result v0
goto :goto_53
.end method
I've attached the smali file & the services.jar for anyone interested.
Real credit goes to Eugene for fixing the reboot bug~
Hope this helps someone!

Nice work
Sent from my SGH-T959 using XDA App

So for the common folk (like me) we can expect a fix soon? I'm enjoying my Vibrant and my heartfelt thanks to the all the Devs. My friends with the iPhone 4's are jealous that I can change the entire layout/look of my phone so easily.

thanks for the fix

where is service.jar put?

xriderx66 said:
where is service.jar put?
Click to expand...
Click to collapse
System/framework.
Sent from my SGH-T959 using XDA App

Where do we push the smali file?
Sent from my SGH-T959 using XDA App

Smali file is for source. I'll post a flashable. This is mostly for devs .
Sent from my GT-I9000 using Tapatalk

Great work Roman!

Yes flashable please!

Confirmed working!!!

The man's a genius!

Great job, birgertime! You never cease to amaze me. You devs continually overachieve and I couldn't be more appreciative!
Thanks!
- Mat

Great!!! It works! But now there is not "r" displayed when in roaming, only for me?
Sent from my GT-I9000 using XDA App

Do we running 2.2.1 news to flash both zips you posted?
Sent from my GT-I9000 using XDA App

idtheftvictim said:
Do we running 2.2.1 news to flash both zips you posted?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Not flash yet

xriderx66 said:
Yes flashable please!
Click to expand...
Click to collapse
Yes Roman a flashable and that JS5 Beast Rom that you got cooking in the oven right now! LOL!!!

Really something！Cool guy~
Sent from my GT-I9000 using XDA App

Big props Roman... Now, I will be looking forward to a 2.2.1 ROM from your end Amazing as always. Big props to Eugene as well of course and to all our great devs

Great job Birgertime, now is the new services.jar compatible with Darky's final ROM posted by EDT?

[b] [dev][how to]aosp lockscreen whit toggle [/b]

Hi xda peoples
I ported this mods from concept showed by dictact74 & Mirko_DDD, so major credits go to their.....
There are two ways to make this mod.
Improve a new method or by use a old unused method.
Here we going to create a new method, if a lot of people will be interested about this thread, I'll post the other method
YOU CAN DOWNLOAD HERE A FLASHABLE FILE:
http://forum.xda-developers.com/showthread.php?t=2047010
Android.policy.jar
Let's start with Android.policy.jar
smali/com/android/internal/policy/imp/LockPatternKeyguardView
Find and replace the whole method,so we'll improve the aosp lockcreen:
Code:
.method createLockScreen()Landroid/view/View;
.locals 6
.prologue
.line 1268
const/4 v0, 0x0
iget-object v5, p0, Lcom/android/internal/policy/impl/LockPatternKeyguardView;->mContext:Landroid/content/Context;
invoke-virtual {v5}, Landroid/content/Context;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v5
const-string v4, "darboc_aosp_lock"
invoke-static {v5, v4, v0}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v5
if-nez v5, :cond_dar
.line 1044
new-instance v0, Lcom/android/internal/policy/impl/sec/CircleLockScreen;
iget-object v1, p0, Lcom/android/internal/policy/impl/LockPatternKeyguardView;->mContext:Landroid/content/Context;
iget-object v2, p0, Lcom/android/internal/policy/impl/LockPatternKeyguardView;->mConfiguration:Landroid/content/res/Configuration;
iget-object v3, p0, Lcom/android/internal/policy/impl/LockPatternKeyguardView;->mLockPatternUtils:Lcom/android/internal/widget/LockPatternUtils;
iget-object v4, p0, Lcom/android/internal/policy/impl/LockPatternKeyguardView;->mUpdateMonitor:Lcom/android/internal/policy/impl/KeyguardUpdateMonitor;
iget-object v5, p0, Lcom/android/internal/policy/impl/LockPatternKeyguardView;->mKeyguardScreenCallback:Lcom/android/internal/policy/impl/KeyguardScreenCallback;
invoke-direct/range {v0 .. v5}, Lcom/android/internal/policy/impl/sec/CircleLockScreen;->(Landroid/content/Context;Landroid/content/res/Configuration;Lcom/android/internal/widget/LockPatternUtils;Lcom/android/internal/policy/impl/KeyguardUpdateMonitor;Lcom/android/internal/policy/impl/KeyguardScreenCallback;)V
.line 1274
.local v0, lockView:Landroid/view/View;
:goto_0
invoke-direct {p0, v0}, Lcom/android/internal/policy/impl/LockPatternKeyguardView;->initializeTransportControlView(Landroid/view/View;)V
.line 1275
return-object v0
:cond_dar
new-instance v0, Lcom/android/internal/policy/impl/LockScreen;
iget-object v1, p0, Lcom/android/internal/policy/impl/LockPatternKeyguardView;->mContext:Landroid/content/Context;
iget-object v2, p0, Lcom/android/internal/policy/impl/LockPatternKeyguardView;->mConfiguration:Landroid/content/res/Configuration;
iget-object v3, p0, Lcom/android/internal/policy/impl/LockPatternKeyguardView;->mLockPatternUtils:Lcom/android/internal/widget/LockPatternUtils;
iget-object v4, p0, Lcom/android/internal/policy/impl/LockPatternKeyguardView;->mUpdateMonitor:Lcom/android/internal/policy/impl/KeyguardUpdateMonitor;
iget-object v5, p0, Lcom/android/internal/policy/impl/LockPatternKeyguardView;->mKeyguardScreenCallback:Lcom/android/internal/policy/impl/KeyguardScreenCallback;
invoke-direct/range {v0 .. v5}, Lcom/android/internal/policy/impl/LockScreen;->(Landroid/content/Context;Landroid/content/res/Configuration;Lcom/android/internal/widget/LockPatternUtils;Lcom/android/internal/policy/impl/KeyguardUpdateMonitor;Lcom/android/internal/policy/impl/KeyguardScreenCallback;)V
.line 1274
goto :goto_0
.end method
Save and exit
Recompile and push to /system/app
SecSettings:
Open
smali/com/android/settings/LockScreenSettings
we going to improve the checkbox.......
add BLU lines
canc RED lines
Code:
.method private updateState()V
.locals 9
.prologue
const/4 v5, 0x1
const/4 v6, 0x0
.line 263
[COLOR="Blue"]iget-object v7, p0, Lcom/android/settings/LockScreenSettings;->mAospLock:Landroid/preference/CheckBoxPreference;
invoke-virtual {p0}, Lcom/android/settings/LockScreenSettings;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v4
const-string v8, "darboc_aosp_lock"
invoke-static {v4, v8, v6}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v4
if-eqz v4, :cond_7
move v4, v5
invoke-virtual {v7, v4}, Landroid/preference/CheckBoxPreference;->setChecked(Z)V
.line 265
invoke-virtual {p0}, Lcom/android/settings/LockScreenSettings;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v4
iget-object v7, p0, Lcom/android/settings/LockScreenSettings;->mClock:Landroid/preference/CheckBoxPreference;
invoke-virtual {p0}, Lcom/android/settings/LockScreenSettings;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v4[/COLOR]
const-string v8, "show_clock"
Find and replace
Code:
iget-object v9, p0, Lcom/android/settings/LockScreenSettings;->mClock:Landroid/preference/CheckBoxPreference;
const/4 v10, 0x0
invoke-virtual {v9, v10}, Landroid/preference/CheckBoxPreference;->setPersistent(Z)V
[COLOR="blue"]const-string v9, "darboc_aosp_lock"
invoke-virtual {p0, v9}, Lcom/android/settings/LockScreenSettings;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v9
check-cast v9, Landroid/preference/CheckBoxPreference;
iput-object v9, p0, Lcom/android/settings/LockScreenSettings;->mAospLock:Landroid/preference/CheckBoxPreference;
.line 159
iget-object v9, p0, Lcom/android/settings/LockScreenSettings;->mAospLock:Landroid/preference/CheckBoxPreference;
const/4 v10, 0x0
invoke-virtual {v9, v10}, Landroid/preference/CheckBoxPreference;->setPersistent(Z)V
[/COLOR]
.line 161
const-string v9, "weather"
invoke-virtual {p0, v9}, Lcom/android/settings/LockScreenSettings;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
Find and add the condition
Code:
iget-object v4, p0, Lcom/android/settings/LockScreenSettings;->mSayCommand:Landroid/preference/CheckBoxPreference;
invoke-virtual {p2, v4}, Ljava/lang/Object;->equals(Ljava/lang/Object;)Z
move-result v4
if-eqz v4, [COLOR="Blue"]:cond_bbb[/COLOR]
.line 338
invoke-virtual {p0}, Lcom/android/settings/LockScreenSettings;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v4
const-string v5, "wake_up_lock_screen"
iget-object v6, p0, Lcom/android/settings/LockScreenSettings;->mSayCommand:Landroid/preference/CheckBoxPreference;
Find and add the new condition method
Code:
invoke-static {v4, v5, v2}, Landroid/provider/Settings$System;->putInt(Landroid/content/ContentResolver;Ljava/lang/String;I)Z
goto/16 :goto_1
:cond_a
move v2, v3
goto :goto_5
[COLOR="blue"]:cond_bbb
iget-object v4, p0, Lcom/android/settings/LockScreenSettings;->mAospLock:Landroid/preference/CheckBoxPreference;
invoke-virtual {p2, v4}, Ljava/lang/Object;->equals(Ljava/lang/Object;)Z
move-result v4
if-eqz v4, :cond_0
.line 313
invoke-virtual {p0}, Lcom/android/settings/LockScreenSettings;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v4
const-string v5, "darboc_aosp_lock"
iget-object v6, p0, Lcom/android/settings/LockScreenSettings;->mAospLock:Landroid/preference/CheckBoxPreference;
invoke-virtual {v6}, Landroid/preference/CheckBoxPreference;->isChecked()Z
move-result v6
if-eqz v6, :cond_c
:goto_6
invoke-static {v4, v5, v2}, Landroid/provider/Settings$System;->putInt(Landroid/content/ContentResolver;Ljava/lang/String;I)Z
.line 314
invoke-direct {p0}, Lcom/android/settings/LockScreenSettings;->updateState()V
.line 340
invoke-super {p0, p1, p2}, Lcom/android/settings/SettingsPreferenceFragment;->onPreferenceTreeClick(Landroid/preference/PreferenceScreen;Landroid/preference/Preference;)Z
move-result v2
return v2
:cond_c
move v2, v3
.line 313
goto :goto_6[/COLOR]
.line 337
.end method
.method public onResume()V
.locals 0
.prologue
.line 257
invoke-super {p0}, Lcom/android/settings/SettingsPreferenceFragment;->onResume()V
Save and exit
Now we'll iprove the xml part that show the checkbox and call the mali part
Go to res/values/strings.xml
Add the following lines somewhere in this file:
Code:
<string name="enable_aosp_lock">AOSP lockscreen</string>
<string name="enable_aosp_lock_text">Enable AOSP lockscreen</string>
Save and exit
Go to res/xml/Lockscreen_Settings.xml
Add the following lines where you like that checkbox would be showed
Code:
<CheckBoxPreference android:title="@string/enable_aosp_lock" android:key="darboc_aosp_lock" android:summary="@string/enable_aosp_lock_text" />
Recompile and push to /system/app
Reboot
Now will find your new toggle in lockscreen options
Enjoy
MERRY X-MAS AND HAPPY MODS NEW YEAR

Reserved.........
Inviato dal mio GT-N7000 con Tapatalk 2

One more
Inviato dal mio GT-N7000 con Tapatalk 2

Thanks for sharing your knowledge ! I will see how far I can get

[GUIDE / HOW-TO] Add screen off animations to KitKat 4.4 [CRT/FADE/NONE]

It seems that no matter how many cool mods you put out there, a lot of folks continue to ask for CRT. So here's a 'How-To' based off of the Sprint NE5 4.4 release, but this should also work in other variants and/or Samsung devices.
We will be working with the services.jar, and some knowledge decompiling and/or baksmali is required.
Also note that the debug code has been removed; to do the same use the -b switch when decompiling with apktool.
Code:
apktool d -b services.jar
PART 1
To start:
Navigate and open
Code:
smali\com\android\server\power\DisplayPowerController.smali
ADD the lines in RED right at the top
Code:
.class final Lcom/android/server/power/DisplayPowerController;
.super Ljava/lang/Object;
.source "DisplayPowerController.java"
[COLOR="Red"]# interfaces
.implements Landroid/animation/Animator$AnimatorListener;[/COLOR]
# annotations
Search for and add the lines in RED
Code:
.field private mElectronBeamFadesConfig:Z
[COLOR="Red"].field private mElectronBeamOff:I[/COLOR]
.field private mElectronBeamOffAnimator:Landroid/animation/ObjectAnimator;
[COLOR="Red"].field private mElectronBeamOn:I[/COLOR]
.field private mElectronBeamOnAnimator:Landroid/animation/ObjectAnimator;
Next search for
Code:
.method private getDynamicAutoBrightnessHighHysteresis(F)F
And add the following method DIRECTLY ABOVE
Code:
.method static getBeamCfg(Ljava/lang/String;I)I
.locals 3
move v0, p1
invoke-static {p0}, Landroid/os/SystemProperties;->get(Ljava/lang/String;)Ljava/lang/String;
move-result-object v1
const-string v2, "none"
invoke-virtual {v1, v2}, Ljava/lang/String;->equalsIgnoreCase(Ljava/lang/String;)Z
move-result v2
if-eqz v2, :cond_0
const v0, 0x0
return v0
:cond_0
const-string v2, "crt"
invoke-virtual {v1, v2}, Ljava/lang/String;->equalsIgnoreCase(Ljava/lang/String;)Z
move-result v2
if-eqz v2, :cond_1
const v0, 0x1
return v0
:cond_1
const-string v2, "fade"
invoke-virtual {v1, v2}, Ljava/lang/String;->equalsIgnoreCase(Ljava/lang/String;)Z
move-result v2
if-eqz v2, :cond_2
const v0, 0x2
:cond_2
return v0
.end method
We will now be working in the following method so search for it next!
Code:
.method private initialize()V
Within the above referenced method, search for
Code:
iput-object v0, p0, Lcom/android/server/power/DisplayPowerController;->mPowerState:Lcom/android/server/power/DisplayPowerState;
And add the line in RED
Code:
iput-object v0, p0, Lcom/android/server/power/DisplayPowerController;->mPowerState:Lcom/android/server/power/DisplayPowerState;
[COLOR="Red"]const v4, 0x2[/COLOR]
iget-object v0, p0, Lcom/android/server/power/DisplayPowerController;->mPowerState:Lcom/android/server/power/DisplayPowerState;
Still working within the same method REPLACE
Code:
const-wide/16 v1, 0xc8
WITH
Code:
const-wide/16 v1, 0x190
# This changes the animation speed. Looks much better
And yet still within this method, REPLACE these 2 lines
Code:
iget-object v1, p0, Lcom/android/server/power/DisplayPowerController;->mAnimatorListener:Landroid/animation/Animator$AnimatorListener;
invoke-virtual {v0, v1}, Landroid/animation/Animator;->addListener(Landroid/animation/Animator$AnimatorListener;)V
WITH THE FOLLOWING # This step updated 08.03.14
Code:
invoke-virtual {v0, p0}, Landroid/animation/ObjectAnimator;->addListener(Landroid/animation/Animator$AnimatorListener;)V
const-string v2, "persist.sys.screen_off"
const v3, 0x1
invoke-static {v2, v3}, Lcom/android/server/power/DisplayPowerController;->getBeamCfg(Ljava/lang/String;I)I
move-result v4
iput v4, p0, Lcom/android/server/power/DisplayPowerController;->mElectronBeamOff:I
Finally ADD
Code:
nop
nop
DIRECTLY BELOW
Code:
return-void
That's it for this method!
Continue to Part 2 due to post length limitations

Part 2
Almost there!! Search for
Code:
.method private updatePowerState()V
And REPLACE THE ENTIRE METHOD WITH THE FOLLOWING
Code:
.method private updatePowerState()V
.locals 12
const/4 v7, 0x1
const/4 v8, 0x0
const/4 v0, 0x0
iget-boolean v4, p0, Lcom/android/server/power/DisplayPowerController;->mTwilightChanged:Z
const/4 v5, 0x0
iput-boolean v8, p0, Lcom/android/server/power/DisplayPowerController;->mTwilightChanged:Z
iget-object v9, p0, Lcom/android/server/power/DisplayPowerController;->mLock:Ljava/lang/Object;
monitor-enter v9
const/4 v6, 0x0
:try_start_0
iput-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mPendingUpdatePowerStateLocked:Z
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPendingRequestLocked:Lcom/android/server/power/DisplayPowerRequest;
if-nez v6, :cond_1
monitor-exit v9
:cond_0
:goto_0
return-void
:cond_1
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerRequest:Lcom/android/server/power/DisplayPowerRequest;
if-nez v6, :cond_c
new-instance v6, Lcom/android/server/power/DisplayPowerRequest;
iget-object v10, p0, Lcom/android/server/power/DisplayPowerController;->mPendingRequestLocked:Lcom/android/server/power/DisplayPowerRequest;
invoke-direct {v6, v10}, Lcom/android/server/power/DisplayPowerRequest;-><init>(Lcom/android/server/power/DisplayPowerRequest;)V
iput-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerRequest:Lcom/android/server/power/DisplayPowerRequest;
iget-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mPendingWaitForNegativeProximityLocked:Z
iput-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mWaitingForNegativeProximity:Z
const/4 v6, 0x0
iput-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mPendingWaitForNegativeProximityLocked:Z
iget-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mPendingScreenOnEvenThoughProximityPositiveLocked:Z
iput-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mScreenOnEvenThoughProximityPositive:Z
const/4 v6, 0x0
iput-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mPendingScreenOnEvenThoughProximityPositiveLocked:Z
const/4 v6, 0x0
iput-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mPendingRequestChangedLocked:Z
const/4 v0, 0x1
:cond_2
:goto_1
iget-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mDisplayReadyLocked:Z
if-nez v6, :cond_10
move v1, v7
:goto_2
monitor-exit v9
:try_end_0
.catchall {:try_start_0 .. :try_end_0} :catchall_0
if-eqz v0, :cond_3
invoke-direct {p0}, Lcom/android/server/power/DisplayPowerController;->initialize()V
:cond_3
iget-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mWaitProximityToggled:Z
if-nez v6, :cond_4
iget v6, p0, Lcom/android/server/power/DisplayPowerController;->mProximity:I
if-ne v6, v7, :cond_4
iget-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mScreenOnEvenThoughProximityPositive:Z
if-eqz v6, :cond_4
iput-boolean v7, p0, Lcom/android/server/power/DisplayPowerController;->mWaitProximityToggled:Z
:cond_4
iget-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mWaitProximityToggled:Z
if-eqz v6, :cond_5
iget v6, p0, Lcom/android/server/power/DisplayPowerController;->mProximity:I
if-nez v6, :cond_5
iput-boolean v8, p0, Lcom/android/server/power/DisplayPowerController;->mScreenOnEvenThoughProximityPositive:Z
iput-boolean v8, p0, Lcom/android/server/power/DisplayPowerController;->mWaitProximityToggled:Z
:cond_5
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mProximitySensor:Landroid/hardware/Sensor;
if-eqz v6, :cond_18
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerRequest:Lcom/android/server/power/DisplayPowerRequest;
iget-boolean v6, v6, Lcom/android/server/power/DisplayPowerRequest;->useProximitySensor:Z
if-eqz v6, :cond_15
iget-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mScreenOffBecauseOfProximity:Z
if-nez v6, :cond_11
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerRequest:Lcom/android/server/power/DisplayPowerRequest;
iget v6, v6, Lcom/android/server/power/DisplayPowerRequest;->screenState:I
invoke-static {v6}, Lcom/android/server/power/DisplayPowerController;->wantScreenOn(I)Z
move-result v6
if-nez v6, :cond_11
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerRequest:Lcom/android/server/power/DisplayPowerRequest;
iget v6, v6, Lcom/android/server/power/DisplayPowerRequest;->lastGoToSleepReason:I
if-nez v6, :cond_11
invoke-direct {p0, v8}, Lcom/android/server/power/DisplayPowerController;->setProximitySensorEnabled(Z)V
invoke-direct {p0, v8}, Lcom/android/server/power/DisplayPowerController;->setScreenOn(Z)V
:cond_6
:goto_3
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mLightSensor:Landroid/hardware/Sensor;
if-eqz v6, :cond_7
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mTiltSensor:Landroid/hardware/Sensor;
if-eqz v6, :cond_7
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerRequest:Lcom/android/server/power/DisplayPowerRequest;
iget-boolean v6, v6, Lcom/android/server/power/DisplayPowerRequest;->useAutoBrightness:Z
if-eqz v6, :cond_19
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerRequest:Lcom/android/server/power/DisplayPowerRequest;
iget v6, v6, Lcom/android/server/power/DisplayPowerRequest;->screenState:I
invoke-static {v6}, Lcom/android/server/power/DisplayPowerController;->wantScreenOn(I)Z
move-result v6
if-eqz v6, :cond_19
move v6, v7
:goto_4
invoke-direct {p0, v6, v4}, Lcom/android/server/power/DisplayPowerController;->setLightSensorEnabled(ZZ)V
:cond_7
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerRequest:Lcom/android/server/power/DisplayPowerRequest;
iget v6, v6, Lcom/android/server/power/DisplayPowerRequest;->screenState:I
invoke-static {v6}, Lcom/android/server/power/DisplayPowerController;->wantScreenOn(I)Z
move-result v6
if-eqz v6, :cond_1d
iget v6, p0, Lcom/android/server/power/DisplayPowerController;->mScreenAutoBrightness:I
if-ltz v6, :cond_1a
iget-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mLightSensorEnabled:Z
if-eqz v6, :cond_1a
iget v3, p0, Lcom/android/server/power/DisplayPowerController;->mScreenAutoBrightness:I
iget-boolean v2, p0, Lcom/android/server/power/DisplayPowerController;->mUsingScreenAutoBrightness:Z
iput-boolean v7, p0, Lcom/android/server/power/DisplayPowerController;->mUsingScreenAutoBrightness:Z
:goto_5
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerRequest:Lcom/android/server/power/DisplayPowerRequest;
iget v6, v6, Lcom/android/server/power/DisplayPowerRequest;->screenState:I
const/4 v9, 0x2
if-ne v6, v9, :cond_8
iput v3, p0, Lcom/android/server/power/DisplayPowerController;->mScreenBrightnessOnCover:I
:cond_8
invoke-direct {p0, v3}, Lcom/android/server/power/DisplayPowerController;->getFinalBrightness(I)I
move-result v3
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerRequest:Lcom/android/server/power/DisplayPowerRequest;
iget v6, v6, Lcom/android/server/power/DisplayPowerRequest;->screenState:I
if-ne v6, v7, :cond_1b
add-int/lit8 v6, v3, -0xa
iget v9, p0, Lcom/android/server/power/DisplayPowerController;->mScreenBrightnessDimConfig:I
invoke-static {v6, v9}, Ljava/lang/Math;->min(II)I
move-result v3
const/4 v2, 0x0
:cond_9
:goto_6
invoke-direct {p0, v3}, Lcom/android/server/power/DisplayPowerController;->clampScreenBrightness(I)I
move-result v9
if-eqz v2, :cond_1c
const/16 v6, 0x1f4
:goto_7
invoke-direct {p0, v9, v6}, Lcom/android/server/power/DisplayPowerController;->animateScreenBrightness(II)V
:goto_8
iget-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mScreenOffBecauseOfProximity:Z
if-nez v6, :cond_a
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerRequest:Lcom/android/server/power/DisplayPowerRequest;
iget v6, v6, Lcom/android/server/power/DisplayPowerRequest;->screenState:I
invoke-static {v6}, Lcom/android/server/power/DisplayPowerController;->wantScreenOn(I)Z
move-result v6
if-eqz v6, :cond_23
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mElectronBeamOffAnimator:Landroid/animation/ObjectAnimator;
invoke-virtual {v6}, Landroid/animation/ObjectAnimator;->isStarted()Z
move-result v6
if-nez v6, :cond_a
invoke-direct {p0, v7}, Lcom/android/server/power/DisplayPowerController;->setScreenOn(Z)V
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerRequest:Lcom/android/server/power/DisplayPowerRequest;
iget-boolean v6, v6, Lcom/android/server/power/DisplayPowerRequest;->blockScreenOn:Z
if-eqz v6, :cond_1e
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerState:Lcom/android/server/power/DisplayPowerState;
invoke-virtual {v6}, Lcom/android/server/power/DisplayPowerState;->getElectronBeamLevel()F
move-result v6
const v10, 0x0
cmpl-float v6, v6, v10
if-nez v6, :cond_1e
invoke-direct {p0}, Lcom/android/server/power/DisplayPowerController;->blockScreenOn()V
:cond_a
:goto_9
if-eqz v1, :cond_0
iget-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mScreenOnWasBlocked:Z
if-nez v6, :cond_0
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mElectronBeamOnAnimator:Landroid/animation/ObjectAnimator;
invoke-virtual {v6}, Landroid/animation/ObjectAnimator;->isStarted()Z
move-result v6
if-nez v6, :cond_0
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mElectronBeamOffAnimator:Landroid/animation/ObjectAnimator;
invoke-virtual {v6}, Landroid/animation/ObjectAnimator;->isStarted()Z
move-result v6
if-nez v6, :cond_0
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerState:Lcom/android/server/power/DisplayPowerState;
iget-object v7, p0, Lcom/android/server/power/DisplayPowerController;->mCleanListener:Ljava/lang/Runnable;
invoke-virtual {v6, v7}, Lcom/android/server/power/DisplayPowerState;->waitUntilClean(Ljava/lang/Runnable;)Z
move-result v6
if-eqz v6, :cond_0
iget-object v7, p0, Lcom/android/server/power/DisplayPowerController;->mLock:Ljava/lang/Object;
monitor-enter v7
:try_start_1
iget-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mPendingRequestChangedLocked:Z
if-nez v6, :cond_b
const/4 v6, 0x1
iput-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mDisplayReadyLocked:Z
sget-boolean v6, Lcom/android/server/power/DisplayPowerController;->DEBUG:Z
if-eqz v6, :cond_b
const-string v6, "DisplayPowerController"
const-string v8, "Display ready!"
invoke-static {v6, v8}, Landroid/util/Slog;->d(Ljava/lang/String;Ljava/lang/String;)I
:cond_b
monitor-exit v7
:try_end_1
.catchall {:try_start_1 .. :try_end_1} :catchall_1
invoke-direct {p0}, Lcom/android/server/power/DisplayPowerController;->sendOnStateChangedWithWakelock()V
goto/16 :goto_0
:cond_c
:try_start_2
iget-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mPendingRequestChangedLocked:Z
if-eqz v6, :cond_2
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerRequest:Lcom/android/server/power/DisplayPowerRequest;
iget v6, v6, Lcom/android/server/power/DisplayPowerRequest;->screenAutoBrightnessAdjustment:F
iget-object v10, p0, Lcom/android/server/power/DisplayPowerController;->mPendingRequestLocked:Lcom/android/server/power/DisplayPowerRequest;
iget v10, v10, Lcom/android/server/power/DisplayPowerRequest;->screenAutoBrightnessAdjustment:F
cmpl-float v6, v6, v10
if-eqz v6, :cond_d
const/4 v4, 0x1
:cond_d
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerRequest:Lcom/android/server/power/DisplayPowerRequest;
iget-boolean v6, v6, Lcom/android/server/power/DisplayPowerRequest;->autoBrightnessForEbookOnly:Z
iget-object v10, p0, Lcom/android/server/power/DisplayPowerController;->mPendingRequestLocked:Lcom/android/server/power/DisplayPowerRequest;
iget-boolean v10, v10, Lcom/android/server/power/DisplayPowerRequest;->autoBrightnessForEbookOnly:Z
if-eq v6, v10, :cond_e
const-string v6, "DisplayPowerController"
new-instance v10, Ljava/lang/StringBuilder;
invoke-direct {v10}, Ljava/lang/StringBuilder;-><init>()V
const-string v11, "[DAB] updatePowerState : autoBrightnessForEbookOnly : "
invoke-virtual {v10, v11}, Ljava/lang/StringBuilder;->append(Ljava/lang/String;)Ljava/lang/StringBuilder;
move-result-object v10
iget-object v11, p0, Lcom/android/server/power/DisplayPowerController;->mPendingRequestLocked:Lcom/android/server/power/DisplayPowerRequest;
iget-boolean v11, v11, Lcom/android/server/power/DisplayPowerRequest;->autoBrightnessForEbookOnly:Z
invoke-virtual {v10, v11}, Ljava/lang/StringBuilder;->append(Z)Ljava/lang/StringBuilder;
move-result-object v10
invoke-virtual {v10}, Ljava/lang/StringBuilder;->toString()Ljava/lang/String;
move-result-object v10
invoke-static {v6, v10}, Landroid/util/Slog;->d(Ljava/lang/String;Ljava/lang/String;)I
const/4 v4, 0x1
:cond_e
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerRequest:Lcom/android/server/power/DisplayPowerRequest;
iget v6, v6, Lcom/android/server/power/DisplayPowerRequest;->screenState:I
if-ne v6, v7, :cond_f
move v5, v7
:goto_a
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerRequest:Lcom/android/server/power/DisplayPowerRequest;
iget-object v10, p0, Lcom/android/server/power/DisplayPowerController;->mPendingRequestLocked:Lcom/android/server/power/DisplayPowerRequest;
invoke-virtual {v6, v10}, Lcom/android/server/power/DisplayPowerRequest;->copyFrom(Lcom/android/server/power/DisplayPowerRequest;)V
iget-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mWaitingForNegativeProximity:Z
iget-boolean v10, p0, Lcom/android/server/power/DisplayPowerController;->mPendingWaitForNegativeProximityLocked:Z
or-int/2addr v6, v10
iput-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mWaitingForNegativeProximity:Z
const/4 v6, 0x0
iput-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mPendingWaitForNegativeProximityLocked:Z
iget-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mScreenOnEvenThoughProximityPositive:Z
iget-boolean v10, p0, Lcom/android/server/power/DisplayPowerController;->mPendingScreenOnEvenThoughProximityPositiveLocked:Z
or-int/2addr v6, v10
iput-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mScreenOnEvenThoughProximityPositive:Z
const/4 v6, 0x0
iput-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mPendingScreenOnEvenThoughProximityPositiveLocked:Z
const/4 v6, 0x0
iput-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mPendingRequestChangedLocked:Z
const/4 v6, 0x0
iput-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mDisplayReadyLocked:Z
goto/16 :goto_1
:catchall_0
move-exception v6
monitor-exit v9
:try_end_2
.catchall {:try_start_2 .. :try_end_2} :catchall_0
throw v6
:cond_f
move v5, v8
goto :goto_a
:cond_10
move v1, v8
goto/16 :goto_2
:cond_11
invoke-direct {p0, v7}, Lcom/android/server/power/DisplayPowerController;->setProximitySensorEnabled(Z)V
iget v6, p0, Lcom/android/server/power/DisplayPowerController;->mProximity:I
if-ne v6, v7, :cond_14
iget-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mScreenOnEvenThoughProximityPositive:Z
if-nez v6, :cond_12
iput-boolean v7, p0, Lcom/android/server/power/DisplayPowerController;->mScreenOffBecauseOfProximity:Z
invoke-direct {p0, v8}, Lcom/android/server/power/DisplayPowerController;->setScreenOn(Z)V
invoke-direct {p0}, Lcom/android/server/power/DisplayPowerController;->sendOnProximityPositiveWithWakelock()V
goto/16 :goto_3
:cond_12
iget-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mScreenOffBecauseOfProximity:Z
if-eqz v6, :cond_6
iget-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mScreenOnEvenThoughProximityPositive:Z
if-eqz v6, :cond_6
iput-boolean v8, p0, Lcom/android/server/power/DisplayPowerController;->mScreenOffBecauseOfProximity:Z
invoke-direct {p0, v7}, Lcom/android/server/power/DisplayPowerController;->setScreenOn(Z)V
iget-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mScreenOnEvenThoughProximityPositive:Z
if-eqz v6, :cond_13
const-string v6, "DisplayPowerController"
const-string v9, "[sensor] proximity : mScreenOnEvenThoughProximityPositive is true"
invoke-static {v6, v9}, Landroid/util/Slog;->d(Ljava/lang/String;Ljava/lang/String;)I
:cond_13
invoke-direct {p0}, Lcom/android/server/power/DisplayPowerController;->sendOnProximityNegativeWithWakelock()V
goto/16 :goto_3
:cond_14
iget v6, p0, Lcom/android/server/power/DisplayPowerController;->mProximity:I
if-nez v6, :cond_6
iget-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mScreenOffBecauseOfProximity:Z
if-eqz v6, :cond_6
iput-boolean v8, p0, Lcom/android/server/power/DisplayPowerController;->mScreenOffBecauseOfProximity:Z
invoke-direct {p0, v7}, Lcom/android/server/power/DisplayPowerController;->setScreenOn(Z)V
invoke-direct {p0}, Lcom/android/server/power/DisplayPowerController;->sendOnProximityNegativeWithWakelock()V
goto/16 :goto_3
:cond_15
iget-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mWaitingForNegativeProximity:Z
if-eqz v6, :cond_17
iput-boolean v8, p0, Lcom/android/server/power/DisplayPowerController;->mScreenOnEvenThoughProximityPositive:Z
iget v6, p0, Lcom/android/server/power/DisplayPowerController;->mProximity:I
if-ne v6, v7, :cond_16
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerRequest:Lcom/android/server/power/DisplayPowerRequest;
iget v6, v6, Lcom/android/server/power/DisplayPowerRequest;->screenState:I
invoke-static {v6}, Lcom/android/server/power/DisplayPowerController;->wantScreenOn(I)Z
move-result v6
if-eqz v6, :cond_6
:cond_16
invoke-direct {p0, v8}, Lcom/android/server/power/DisplayPowerController;->setProximitySensorEnabled(Z)V
iput-boolean v8, p0, Lcom/android/server/power/DisplayPowerController;->mScreenOffBecauseOfProximity:Z
invoke-direct {p0, v7}, Lcom/android/server/power/DisplayPowerController;->setScreenOn(Z)V
invoke-direct {p0}, Lcom/android/server/power/DisplayPowerController;->sendOnProximityNegativeWithWakelock()V
iput-boolean v8, p0, Lcom/android/server/power/DisplayPowerController;->mWaitingForNegativeProximity:Z
goto/16 :goto_3
:cond_17
iput-boolean v8, p0, Lcom/android/server/power/DisplayPowerController;->mScreenOnEvenThoughProximityPositive:Z
invoke-direct {p0, v8}, Lcom/android/server/power/DisplayPowerController;->setProximitySensorEnabled(Z)V
iget-boolean v6, p0, Lcom/android/server/power/DisplayPowerController;->mScreenOffBecauseOfProximity:Z
if-eqz v6, :cond_6
iput-boolean v8, p0, Lcom/android/server/power/DisplayPowerController;->mScreenOffBecauseOfProximity:Z
invoke-direct {p0, v7}, Lcom/android/server/power/DisplayPowerController;->setScreenOn(Z)V
invoke-direct {p0}, Lcom/android/server/power/DisplayPowerController;->sendOnProximityNegativeWithWakelock()V
goto/16 :goto_3
:cond_18
iput-boolean v8, p0, Lcom/android/server/power/DisplayPowerController;->mWaitingForNegativeProximity:Z
goto/16 :goto_3
:cond_19
move v6, v8
goto/16 :goto_4
:cond_1a
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerRequest:Lcom/android/server/power/DisplayPowerRequest;
iget v3, v6, Lcom/android/server/power/DisplayPowerRequest;->screenBrightness:I
const/4 v2, 0x0
iput-boolean v8, p0, Lcom/android/server/power/DisplayPowerController;->mUsingScreenAutoBrightness:Z
goto/16 :goto_5
:cond_1b
if-eqz v5, :cond_9
const/4 v2, 0x0
goto/16 :goto_6
:cond_1c
const/16 v6, 0x7d0
goto/16 :goto_7
:cond_1d
iput-boolean v8, p0, Lcom/android/server/power/DisplayPowerController;->mUsingScreenAutoBrightness:Z
goto/16 :goto_8
:cond_1e
invoke-direct {p0}, Lcom/android/server/power/DisplayPowerController;->unblockScreenOn()V
iget v10, p0, Lcom/android/server/power/DisplayPowerController;->mElectronBeamOn:I
if-nez v10, :cond_1f
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerState:Lcom/android/server/power/DisplayPowerState;
const/high16 v7, 0x3f80
invoke-virtual {v6, v7}, Lcom/android/server/power/DisplayPowerState;->setElectronBeamLevel(F)V
invoke-virtual {v6}, Lcom/android/server/power/DisplayPowerState;->dismissElectronBeam()V
goto/16 :goto_9
:cond_1f
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mElectronBeamOnAnimator:Landroid/animation/ObjectAnimator;
invoke-virtual {v6}, Landroid/animation/ObjectAnimator;->isStarted()Z
move-result v6
if-nez v6, :cond_a
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerState:Lcom/android/server/power/DisplayPowerState;
invoke-virtual {v6}, Lcom/android/server/power/DisplayPowerState;->getElectronBeamLevel()F
move-result v6
const/high16 v7, 0x3f80
cmpl-float v6, v6, v7
if-nez v6, :cond_20
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerState:Lcom/android/server/power/DisplayPowerState;
invoke-virtual {v6}, Lcom/android/server/power/DisplayPowerState;->dismissElectronBeam()V
goto/16 :goto_9
:cond_20
const v6, 0x2
if-eq v6, v10, :cond_21
const v10, 0x0
:cond_21
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerState:Lcom/android/server/power/DisplayPowerState;
invoke-virtual {v6, v10}, Lcom/android/server/power/DisplayPowerState;->prepareElectronBeam(I)Z
move-result v6
if-eqz v6, :cond_22
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mElectronBeamOnAnimator:Landroid/animation/ObjectAnimator;
invoke-virtual {v6}, Landroid/animation/ObjectAnimator;->start()V
goto/16 :goto_9
:cond_22
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mElectronBeamOnAnimator:Landroid/animation/ObjectAnimator;
invoke-virtual {v6}, Landroid/animation/ObjectAnimator;->end()V
goto/16 :goto_9
:cond_23
iget v10, p0, Lcom/android/server/power/DisplayPowerController;->mElectronBeamOff:I
if-nez v10, :cond_24
invoke-direct {p0, v8}, Lcom/android/server/power/DisplayPowerController;->setScreenOn(Z)V
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerRequest:Lcom/android/server/power/DisplayPowerRequest;
iget-boolean v6, v6, Lcom/android/server/power/DisplayPowerRequest;->blockScreenOn:Z
if-nez v6, :cond_a
invoke-direct {p0}, Lcom/android/server/power/DisplayPowerController;->unblockScreenOn()V
goto/16 :goto_9
:cond_24
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mElectronBeamOnAnimator:Landroid/animation/ObjectAnimator;
invoke-virtual {v6}, Landroid/animation/ObjectAnimator;->isStarted()Z
move-result v6
if-nez v6, :cond_a
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mElectronBeamOffAnimator:Landroid/animation/ObjectAnimator;
invoke-virtual {v6}, Landroid/animation/ObjectAnimator;->isStarted()Z
move-result v6
if-nez v6, :cond_a
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerState:Lcom/android/server/power/DisplayPowerState;
invoke-virtual {v6}, Lcom/android/server/power/DisplayPowerState;->getElectronBeamLevel()F
move-result v6
const v10, 0x0
cmpl-float v6, v6, v10
if-nez v6, :cond_25
invoke-direct {p0, v8}, Lcom/android/server/power/DisplayPowerController;->setScreenOn(Z)V
goto/16 :goto_9
:cond_25
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerState:Lcom/android/server/power/DisplayPowerState;
iget v10, p0, Lcom/android/server/power/DisplayPowerController;->mElectronBeamOff:I
invoke-virtual {v6, v10}, Lcom/android/server/power/DisplayPowerState;->prepareElectronBeam(I)Z
move-result v6
if-eqz v6, :cond_26
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mPowerState:Lcom/android/server/power/DisplayPowerState;
invoke-virtual {v6}, Lcom/android/server/power/DisplayPowerState;->isScreenOn()Z
move-result v6
if-eqz v6, :cond_26
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mElectronBeamOffAnimator:Landroid/animation/ObjectAnimator;
invoke-virtual {v6}, Landroid/animation/ObjectAnimator;->start()V
goto/16 :goto_9
:cond_26
iget-object v6, p0, Lcom/android/server/power/DisplayPowerController;->mElectronBeamOffAnimator:Landroid/animation/ObjectAnimator;
invoke-virtual {v6}, Landroid/animation/ObjectAnimator;->end()V
goto/16 :goto_9
:catchall_1
move-exception v6
:try_start_3
monitor-exit v7
:try_end_3
.catchall {:try_start_3 .. :try_end_3} :catchall_1
throw v6
.end method
Last step in this smali
Search for
Code:
.method public requestPowerState(Lcom/android/server/power/DisplayPowerRequest;ZZ)Z
And place the following methods DIRECTLY ABOVE it
Code:
.method public onAnimationCancel(Landroid/animation/Animator;)V
.locals 0
return-void
.end method
.method public onAnimationEnd(Landroid/animation/Animator;)V
.locals 0
invoke-direct {p0}, Lcom/android/server/power/DisplayPowerController;->sendUpdatePowerState()V
return-void
.end method
.method public onAnimationRepeat(Landroid/animation/Animator;)V
.locals 0
return-void
.end method
.method public onAnimationStart(Landroid/animation/Animator;)V
.locals 0
return-void
.end method
That's all for the services.jar!
Finally you must add this value to your build.prop
Code:
#CRT Mod
persist.sys.screen_off=crt
You can use any of the following values for off : fade, crt, none
I have also attached both the original and edited smali for diffing out
Enjoy!!

Reserved just because :silly:

Great guide.
Can't wait to see it in action.

Aewsome, this is great, thanks @rompnit, great work!:good::good: Out of thanks, be back shortly, I got to do this mod here real quick....

worked on both S5 and Note3...rocking now...thanks. Nice work...?

Great guide, thank you!
In theory, someone that has this working on a stock (rooted of course) NCG build could share the modded files to save others the more sensitive and tricky work right? If so, anyone willing to share those files? Haven't touched bs in a couple years now ☺

Know of any other bool or setting that would be preventing this from working?

Versatile1 said:
Know of any other bool or setting that would be preventing this from working?
Click to expand...
Click to collapse
Could double check framework-res for
Code:
<bool name="config_animateScreenLights">true</bool>
Make sure it's indeed set to 'true'.
What firmware/device are you modding?

S5 DEV edition G900VOYU1ANCG
services.jar is almost identical as retail.
Sent from my SM-G900V using Tapatalk

Versatile1 said:
S5 DEV edition G900VOYU1ANCG
services.jar is almost identical as retail.
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
Did you check that bool? Get it worked out?
Sent from my SM-G900P using Tapatalk

rompnit said:
Did you check that bool? Get it worked out?
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
Checked the bool, still a no go. I probably fat fingered it
Sent from my SM-G900V using Tapatalk

Versatile1 said:
Checked the bool, still a no go. I probably fat fingered it
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
My apologies.. I excluded the interfaces in the guide.. :crying: The OP has been updated, but here's what was added:
ADD the lines in RED right at the top
Code:
.class final Lcom/android/server/power/DisplayPowerController;
.super Ljava/lang/Object;
.source "DisplayPowerController.java"
[COLOR="Red"]# interfaces
.implements Landroid/animation/Animator$AnimatorListener;[/COLOR]
# annotations
Let me know if this does it? If not PM me your services

rompnit said:
My apologies.. I excluded the interfaces in the guide.. :crying: The OP has been updated, but here's what was added:
ADD the lines in RED right at the top
Code:
.class final Lcom/android/server/power/DisplayPowerController;
.super Ljava/lang/Object;
.source "DisplayPowerController.java"
[COLOR="Red"]# interfaces
.implements Landroid/animation/Animator$AnimatorListener;[/COLOR]
# annotations
Let me know if this does it? If not PM me your services
Click to expand...
Click to collapse
Thank you, will try tomorrow morning.
Sent from my SM-G900V using Tapatalk

Thank you for all the help. Working great! !!
Sent from my SM-G900V using Tapatalk

Thanks rompnit, works great.

metalfan78 said:
Thanks rompnit, works great.
Click to expand...
Click to collapse
A lot of thanks by guide.
Its worked here crt and fade but im having reboots when i use rotation screen.
Any tips?

eric-filth said:
A lot of thanks by guide.
Its worked here crt and fade but im having reboots when i use rotation screen.
Any tips?
Click to expand...
Click to collapse
Pull a logcat while it happens to narrow it down.

eric-filth said:
A lot of thanks by guide.
Its worked here crt and fade but im having reboots when i use rotation screen.
Any tips?
Click to expand...
Click to collapse
Found the issue with rotation and this mod. It was the screen on animator... The OP has been updated to reflect the change

rompnit said:
Reserved just because :silly:
Click to expand...
Click to collapse
Great guide, thank you!

[Guide How-to] KitKat 4.4.2/Android L Music Control - Volume Music Skip and More

[Guide How-to] KitKat 4.4.2/Android L Music Control - Volume Music Skip
UPDATED FOR ANDROID L
This guide requires knowledge of decompiling and compiling apk and smali files.
It is only a guide.
I do not take requests. If you want this mod for your rom, get with a dev with the knowledge to get it done.
I have attached android.policy files for diffing in case you get stuck on a section.
SecSettings.apk
In SecSettings.apk we setup the Music Control menu items & toggles.
(This edit does not work on Android L)
*** Add the two new files from the SecSettings_new_files.zip attached at the bottom of this post.
res/values/strings.xml edit:
Add new lines
Code:
<string name="volbtn_toggle_title">Music Control</string>
<string name="volbtn_timeout_title">Button Delay</string>
<string name="volbtn_timeout_summary">%s</string>
<string name="volbtn_vol_up_title">Volume Up Action</string>
<string name="volbtn_vol_up_summary">%s</string>
<string name="volbtn_vol_down_title">Volume Down Action</string>
<string name="volbtn_vol_down_summary">%s</string>
res/values/arrays.xml edit:
Add new lines
Code:
<string-array name="volbtn_action_entries">
<item>Next</item>
<item>Pause</item>
<item>Play</item>
<item>Play/Pause</item>
<item>Previous</item>
<item>Stop</item>
</string-array>
<string-array name="volbtn_action_values">
<item>87</item>
<item>127</item>
<item>126</item>
<item>85</item>
<item>88</item>
<item>86</item>
</string-array>
<string-array name="volbtn_timeout_entries">
<item>100ms</item>
<item>150ms</item>
<item>200ms</item>
<item>250ms</item>
<item>300ms</item>
<item>350ms</item>
<item>400ms</item>
<item>450ms</item>
<item>500ms</item>
</string-array>
<string-array name="volbtn_timeout_values">
<item>100</item>
<item>150</item>
<item>200</item>
<item>250</item>
<item>300</item>
<item>350</item>
<item>400</item>
<item>450</item>
<item>500</item>
</string-array>
res/xml/sound_settings.xml edit:
Add new line where you want the menu item to appear in the Sound settings menu.
Code:
<SwitchPreferenceScreen android:title="@string/volbtn_toggle_title" android:key="volbtn_music_controls" android:fragment="com.android.settings.VolBtnSettings" />
Smali Edit:
smali/com/android/settings/SoundSettings.smali
Add new line in BLUE
Code:
.field private mVibrateWhenRinging:Landroid/preference/CheckBoxPreference;
[COLOR="Blue"].field private mVolBtnMusicCtrl:Landroid/preference/SwitchPreferenceScreen;
[/COLOR]
.field private mVolume:Lcom/android/settings/RingerVolumePreference;
Increase locals value by 1 indicated in GREEN
Note:
When the change to .locals is increased by one, both of the V7 values in the new lines should be one LESS than the .locals value.
(New .locals value in our example is 8. 8-1=7, so we use V7)
Add new lines indicated in BLUE
Code:
.method private updateState(Z)V
[COLOR="Green"].locals 8
[/COLOR]
const/4 v2, 0x1
const/4 v4, 0x0
invoke-virtual {p0}, Landroid/app/Fragment;->getActivity()Landroid/app/Activity;
move-result-object v0
if-nez v0, :cond_1
:cond_0
:goto_0
return-void
:cond_1
iget-object v0, p0, Lcom/android/settings/SoundSettings;->mAudioManager:Landroid/media/AudioManager;
invoke-virtual {v0}, Landroid/media/AudioManager;->getRingerMode()I
move-result v6
[COLOR="Blue"] iget-object v1, p0, Lcom/android/settings/SoundSettings;->mVolBtnMusicCtrl:Landroid/preference/SwitchPreferenceScreen;
if-eqz v1, :cond_td
iget-object v3, p0, Lcom/android/settings/SoundSettings;->mVolBtnMusicCtrl:Landroid/preference/SwitchPreferenceScreen;
invoke-virtual {p0}, Lcom/android/settings/SoundSettings;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v1
const-string v7, "volbtn_music_controls"
invoke-static {v1, v7, v4}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v1
if-eqz v1, :cond_vol
move v1, v2
:goto_vol
invoke-virtual {v3, v1}, Landroid/preference/SwitchPreferenceScreen;->setChecked(Z)V
:cond_td
[/COLOR] const-string v0, "CTC"
New lines at the end of the same method.
Add lines indicated in BLUE
Code:
.method private updateState(Z)V
.
.
.
goto/16 :goto_1
[COLOR="Blue"] :cond_vol
move v1, v4
goto/16 :goto_vol
[/COLOR].end method
Search for the string "phone_vibration" in SoundSettings.smali and add the new lines indicated in BLUE right above it.
Code:
[COLOR="Blue"]const-string v32, "volbtn_music_controls"
move-object/from16 v0, p0
move-object/from16 v1, v32
invoke-virtual {v0, v1}, Lcom/android/settings/SoundSettings;->findPreference(Ljava/lang/CharSequence;)Landroid/preference/Preference;
move-result-object v32
check-cast v32, Landroid/preference/SwitchPreferenceScreen;
move-object/from16 v0, v32
move-object/from16 v1, p0
iput-object v0, v1, Lcom/android/settings/SoundSettings;->mVolBtnMusicCtrl:Landroid/preference/SwitchPreferenceScreen;
move-object/from16 v0, p0
iget-object v0, v0, Lcom/android/settings/SoundSettings;->mVolBtnMusicCtrl:Landroid/preference/SwitchPreferenceScreen;
move-object/from16 v32, v0
move-object/from16 v0, v32
move-object/from16 v1, p0
invoke-virtual {v0, v1}, Landroid/preference/Preference;->setOnPreferenceChangeListener(Landroid/preference/Preference$OnPreferenceChangeListener;)V
[/COLOR]
const-string v32, "phone_vibration"
Add new lines indicated in BLUE
Make sure values v2, v3 & v4 values match surrounding code.
Code:
.method public onPreferenceChange(Landroid/preference/Preference;Ljava/lang/Object;)Z
.locals 6
const/4 v0, 0x0
const/4 v1, 0x1
invoke-virtual {p1}, Landroid/preference/Preference;->getKey()Ljava/lang/String;
move-result-object v2
const-string v3, "SoundSettings"
new-instance v4, Ljava/lang/StringBuilder;
invoke-direct {v4}, Ljava/lang/StringBuilder;-><init>()V
const-string v5, "onPreferenceChange : "
invoke-virtual {v4, v5}, Ljava/lang/StringBuilder;->append(Ljava/lang/String;)Ljava/lang/StringBuilder;
move-result-object v4
invoke-virtual {v4, v2}, Ljava/lang/StringBuilder;->append(Ljava/lang/String;)Ljava/lang/StringBuilder;
move-result-object v4
invoke-virtual {v4}, Ljava/lang/StringBuilder;->toString()Ljava/lang/String;
move-result-object v4
invoke-static {v3, v4}, Landroid/util/secutil/Log;->secV(Ljava/lang/String;Ljava/lang/String;)I
[COLOR="Blue"]const-string v3, "volbtn_music_controls"
invoke-virtual {v3, v2}, Ljava/lang/String;->equals(Ljava/lang/Object;)Z
move-result v3
if-eqz v3, :cond_td3
check-cast p2, Ljava/lang/Boolean;
invoke-virtual {p2}, Ljava/lang/Boolean;->booleanValue()Z
move-result v3
if-eqz v3, :cond_td4
const/4 v0, 0x1
:goto_td5
invoke-virtual {p0}, Lcom/android/settings/SoundSettings;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v4
const-string v3, "volbtn_music_controls"
invoke-static {v4, v3, v0}, Landroid/provider/Settings$System;->putInt(Landroid/content/ContentResolver;Ljava/lang/String;I)Z
goto :goto_0
:cond_td4
const/4 v0, 0x0
goto :goto_td5
:cond_td3[/COLOR]
const-string v3, "emergency_tone"
We need to change three public value so compile the changed SecSettings.apk, then decompile it. Open res/values/public.xml and search for the string these strings and write down the public values:
"action_bar_switch_padding"
"volbtn_toggle_title"
"volbtn_settings"
Now in the original SecSettings, open the smali file we added
smali/com/android/settings/VolBtnSettings.smali, search for each of the strings and change your public value to match as indicated in BLUE.
Code:
const v4, 0x[COLOR="Blue"]7f0f0045[/COLOR] # type="dimen" name="action_bar_switch_padding"
const v4, 0x[COLOR="Blue"]7f091a29[/COLOR] # type="string" name="volbtn_toggle_title"
const v0, 0x[COLOR="Blue"]7f0700fe[/COLOR] # type="xml" name="volbtn_settings"
That should be it for SecSettings.apk. Compile after making these last value changes and make sure the Music Control menu functions before continuing with android.policy.jar.
android.policy.jar
(also see additional changes for Android L linked at the bottom of this post)
*** Add the two new files from the android.policy.new_files.zip attached at the bottom of this post.
Smali Edits
smali/com/android/internal/policy/impl/PhoneWindowManager.smali
Add new line in BLUE
Code:
.field private mKeyEventInjectionThread:Ljava/lang/Thread;
[COLOR="Blue"].field mIsVolLongPressed:Z
[/COLOR]
.field mKeyboardTapVibePattern:[J
Add new lines in BLUE
Code:
.field mVirtualKeyVibePattern:[J
[COLOR="Blue"].field mVolBtnMusicControls:I
.field mVolBtnTimeout:I
.field mVolBtnVolDown:I
.field mVolBtnVolUp:I
[/COLOR].field private mVolumeDownKeyConsumedByScreenshotChord:Z
.field private mVolumeDownKeyTime:J
.field private mVolumeDownKeyTriggered:Z
[COLOR="Blue"].field final mVolumeDownLongPress:Ljava/lang/Runnable;
[/COLOR]
.field private mVolumeUpKeyConsumedByScreenshotChord:Z
.field private mVolumeUpKeyTime:J
.field private mVolumeUpKeyTriggered:Z
[COLOR="Blue"].field final mVolumeUpLongPress:Ljava/lang/Runnable;
[/COLOR]
.field mWifiDisplayConnected:Z
Add new lines in BLUE near end of method BEFORE the return-void.
Code:
.method public constructor <init>()V
.
.
.
[COLOR="Blue"] new-instance v0, Lcom/android/internal/policy/impl/PhoneWindowManager$MusicNext;
invoke-direct {v0, p0}, Lcom/android/internal/policy/impl/PhoneWindowManager$MusicNext;-><init>(Lcom/android/internal/policy/impl/PhoneWindowManager;)V
iput-object v0, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolumeUpLongPress:Ljava/lang/Runnable;
new-instance v0, Lcom/android/internal/policy/impl/PhoneWindowManager$MusicPrev;
invoke-direct {v0, p0}, Lcom/android/internal/policy/impl/PhoneWindowManager$MusicPrev;-><init>(Lcom/android/internal/policy/impl/PhoneWindowManager;)V
iput-object v0, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolumeDownLongPress:Ljava/lang/Runnable;
[/COLOR]
return-void
.end method
.method static synthetic access$000(Lcom/android/internal/policy/impl/PhoneWindowManager;)V
Add new methods ABOVE
.method public hasNavigationBar()Z
Code:
.method handleVolumeLongPress(I)V
.locals 4
const/16 v1, 0x18
if-ne p1, v1, :cond_0
iget-object v0, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolumeUpLongPress:Ljava/lang/Runnable;
:goto_0
iget-object v1, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mHandler:Landroid/os/Handler;
iget v2, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnTimeout:I
int-to-long v2, v2
invoke-virtual {v1, v0, v2, v3}, Landroid/os/Handler;->postDelayed(Ljava/lang/Runnable;J)Z
return-void
:cond_0
iget-object v0, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolumeDownLongPress:Ljava/lang/Runnable;
goto :goto_0
.end method
.method handleVolumeLongPressAbort()V
.locals 2
iget-object v0, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mHandler:Landroid/os/Handler;
iget-object v1, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolumeUpLongPress:Ljava/lang/Runnable;
invoke-virtual {v0, v1}, Landroid/os/Handler;->removeCallbacks(Ljava/lang/Runnable;)V
iget-object v0, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mHandler:Landroid/os/Handler;
iget-object v1, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolumeDownLongPress:Ljava/lang/Runnable;
invoke-virtual {v0, v1}, Landroid/os/Handler;->removeCallbacks(Ljava/lang/Runnable;)V
return-void
.end method
The next section may be a little difficult to find.
Search for the string: "interceptKeyBeforeQueueing: VOLUME key-down while ringing: Silence ringer!", scroll up a few lines and place the new lines indicated in BLUE, right below the :sswitch_1 statement.
Important Note:
(AFTER adding the new section below, come back here)
The v12 value may need to be changed to match surrounding code. The next occurrence in our code is this statement:
Code:
invoke-virtual {v0, v12, v6, v5}, Lcom/android/internal/policy/impl/sec/SamsungPhoneWindowManager;->handleSamsungVolumeControl(IZZ)V
Search for the next occurrence of handleSamsungVolumeControl(IZZ)V and if your second values of v12 & v6 match, then you are good to go. If it is NOT, then the v12 & v6 in the new code below needs to be changed to match that value.
Code:
:sswitch_1
[COLOR="Blue"] move-object/from16 v0, p0
iget v0, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnMusicControls:I
if-eqz v0, :cond_td
invoke-virtual/range {p0 .. p0}, Lcom/android/internal/policy/impl/PhoneWindowManager;->isMusicActive()Z
move-result v0
if-eqz v0, :cond_td
move-object/from16 v0, p0
iget-boolean v0, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mScreenOnEarly:Z
if-nez v0, :cond_td
if-eqz v6, :cond_td2
move-object/from16 v0, p0
move/from16 v1, v12
invoke-virtual {v0, v1}, Lcom/android/internal/policy/impl/PhoneWindowManager;->handleVolumeLongPress(I)V
const/4 v15, 0x0
goto/16 :goto_0
:cond_td2
move-object/from16 v0, p0
invoke-virtual {v0}, Lcom/android/internal/policy/impl/PhoneWindowManager;->handleVolumeLongPressAbort()V
iget-boolean v1, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mIsVolLongPressed:Z
if-nez v1, :cond_td3
move/from16 v1, v12
const/4 v3, 0x3
invoke-virtual {v0, v3, v1}, Lcom/android/internal/policy/impl/PhoneWindowManager;->handleVolumeKey(II)V
:cond_td3
const/4 v1, 0x0
iput-boolean v1, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mIsVolLongPressed:Z
:cond_td
[/COLOR]
if-eqz v6, :cond_19
invoke-static {}, Lcom/android/internal/policy/impl/PhoneWindowManager;->getTelephonyService()Lcom/android/internal/telephony/ITelephony;
move-result-object v17
if-eqz v17, :cond_19
:try_start_0
invoke-interface/range {v17 .. v17}, Lcom/android/internal/telephony/ITelephony;->isRinging()Z
move-result v21
if-eqz v21, :cond_19
const-string v21, "WindowManager"
const-string v22, "interceptKeyBeforeQueueing: VOLUME key-down while ringing: Silence ringer!"
invoke-static/range {v21 .. v22}, Landroid/util/Log;->i(Ljava/lang/String;Ljava/lang/String;)I
invoke-interface/range {v17 .. v17}, Lcom/android/internal/telephony/ITelephony;->silenceRinger()V
:try_end_0
.catch Landroid/os/RemoteException; {:try_start_0 .. :try_end_0} :catch_0
and-int/lit8 v15, v15, -0x2
Android L version of previous section:
New code is BLUE, make sure the code in GREEN match original
Code:
:sswitch_0
[COLOR="Blue"] move-object/from16 v0, p0
iget v0, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnMusicControls:I
if-eqz v0, :cond_td
invoke-virtual/range {p0 .. p0}, Lcom/android/internal/policy/impl/PhoneWindowManager;->isMusicActive()Z
move-result v0
if-eqz v0, :cond_td
move-object/from16 v0, p0
iget-boolean v0, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mScreenOnEarly:Z
if-nez v0, :cond_td
if-eqz v5, :cond_td2
move-object/from16 v0, p0
move/from16 v1, v11
invoke-virtual {v0, v1}, Lcom/android/internal/policy/impl/PhoneWindowManager;->handleVolumeLongPress(I)V
const/16 v16, 0x0
goto/16[/COLOR] [COLOR="Green"]:goto_8[/COLOR]
[COLOR="Blue"]:cond_td2
move-object/from16 v0, p0
invoke-virtual {v0}, Lcom/android/internal/policy/impl/PhoneWindowManager;->handleVolumeLongPressAbort()V
iget-boolean v1, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mIsVolLongPressed:Z
if-nez v1, :cond_td3
move/from16 v1, v11
const/4 v3, 0x3
invoke-virtual {v0, v3, v1}, Lcom/android/internal/policy/impl/PhoneWindowManager;->handleVolumeKey(II)V
:cond_td3
const/4 v1, 0x0
iput-boolean v1, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mIsVolLongPressed:Z
:cond_td[/COLOR]
invoke-virtual/range {p0 .. p0}, Lcom/android/internal/policy/impl/PhoneWindowManager;->getTelecommService()Landroid/telecom/TelecomManager;
move-result-object v17
if-eqz v17, :cond_19
if-eqz v5, :cond_18
invoke-virtual/range {v17 .. v17}, Landroid/telecom/TelecomManager;->isRinging()Z
move-result v21
if-eqz v21, :cond_18
const-string v21, "WindowManager"
const-string v22, "interceptKeyBeforeQueueing: VOLUME key-down while ringing: Silence ringer!"
invoke-static/range {v21 .. v22}, Landroid/util/Log;->i(Ljava/lang/String;Ljava/lang/String;)I
invoke-virtual/range {v17 .. v17}, Landroid/telecom/TelecomManager;->silenceRinger()V
and-int/lit8 v16, v16, -0x2
goto/16 [COLOR="Green"]:goto_8[/COLOR]
Add new method indicated in BLUE:
Code:
.method public isMetaKeyEventRequested(Landroid/content/ComponentName;)Z
.locals 1
iget-object v0, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mSystemKeyManager:Lcom/android/internal/policy/impl/sec/SystemKeyManager;
invoke-virtual {v0, p1}, Lcom/android/internal/policy/impl/sec/SystemKeyManager;->isMetaKeyEventRequested(Landroid/content/ComponentName;)Z
move-result v0
return v0
.end method
[COLOR="Blue"].method isMusicActive()Z
.locals 3
iget-object v1, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mContext:Landroid/content/Context;
const-string v2, "audio"
invoke-virtual {v1, v2}, Landroid/content/Context;->getSystemService(Ljava/lang/String;)Ljava/lang/Object;
move-result-object v0
check-cast v0, Landroid/media/AudioManager;
if-nez v0, :cond_0
const-string v1, "WindowManager"
const-string v2, "isMusicActive: couldn\'t get AudioManager reference"
invoke-static {v1, v2}, Landroid/util/Log;->w(Ljava/lang/String;Ljava/lang/String;)I
const/4 v1, 0x0
:goto_0
return v1
:cond_0
invoke-virtual {v0}, Landroid/media/AudioManager;->isLocalOrRemoteMusicActive()Z
move-result v1
goto :goto_0
.end method[/COLOR]
Add new method indicated in BLUE:
Code:
.method sendCloseSystemWindows(Ljava/lang/String;)V
.locals 1
iget-object v0, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mContext:Landroid/content/Context;
invoke-static {v0, p1}, Lcom/android/internal/policy/impl/PhoneWindowManager;->sendCloseSystemWindows(Landroid/content/Context;Ljava/lang/String;)V
return-void
.end method
[COLOR="Blue"].method protected sendMediaButtonEvent(I)V
.locals 13
invoke-static {}, Landroid/os/SystemClock;->uptimeMillis()J
move-result-wide v1
new-instance v11, Landroid/content/Intent;
const-string v4, "android.intent.action.MEDIA_BUTTON"
const/4 v5, 0x0
invoke-direct {v11, v4, v5}, Landroid/content/Intent;-><init>(Ljava/lang/String;Landroid/net/Uri;)V
new-instance v0, Landroid/view/KeyEvent;
const/4 v5, 0x0
const/4 v7, 0x0
move-wide v3, v1
move v6, p1
invoke-direct/range {v0 .. v7}, Landroid/view/KeyEvent;-><init>(JJIII)V
invoke-virtual {p0, v0}, Lcom/android/internal/policy/impl/PhoneWindowManager;->dispatchMediaKeyWithWakeLockToAudioService(Landroid/view/KeyEvent;)V
const/16 v2, 0x1
invoke-static {v0, v2}, Landroid/view/KeyEvent;->changeAction(Landroid/view/KeyEvent;I)Landroid/view/KeyEvent;
move-result-object v0
invoke-virtual {p0, v0}, Lcom/android/internal/policy/impl/PhoneWindowManager;->dispatchMediaKeyWithWakeLockToAudioService(Landroid/view/KeyEvent;)V
return-void
const-string v4, "android.intent.extra.KEY_EVENT"
invoke-virtual {v11, v4, v0}, Landroid/content/Intent;->putExtra(Ljava/lang/String;Landroid/os/Parcelable;)Landroid/content/Intent;
iget-object v4, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mContext:Landroid/content/Context;
const/4 v5, 0x0
invoke-virtual {v4, v11, v5}, Landroid/content/Context;->sendOrderedBroadcast(Landroid/content/Intent;Ljava/lang/String;)V
new-instance v12, Landroid/content/Intent;
const-string v4, "android.intent.action.MEDIA_BUTTON"
const/4 v5, 0x0
invoke-direct {v12, v4, v5}, Landroid/content/Intent;-><init>(Ljava/lang/String;Landroid/net/Uri;)V
new-instance v3, Landroid/view/KeyEvent;
const/4 v8, 0x1
const/4 v10, 0x0
move-wide v4, v1
move-wide v6, v1
move v9, p1
invoke-direct/range {v3 .. v10}, Landroid/view/KeyEvent;-><init>(JJIII)V
const-string v4, "android.intent.extra.KEY_EVENT"
invoke-virtual {v12, v4, v3}, Landroid/content/Intent;->putExtra(Ljava/lang/String;Landroid/os/Parcelable;)Landroid/content/Intent;
iget-object v4, p0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mContext:Landroid/content/Context;
const/4 v5, 0x0
invoke-virtual {v4, v12, v5}, Landroid/content/Context;->sendOrderedBroadcast(Landroid/content/Intent;Ljava/lang/String;)V
return-void
.end method[/COLOR]
Add new lines indicated in BLUE
NOTE:
Make note of the value of the line in GREEN.
If your value is different, the 4 occurrences of v13 in our new code must also be changed to match.
Example:
If your line before the new code is:
move-result-object v8
You would change the 4 values of v13 to v8.
Code:
.method public updateSettings()V
.locals 23
move-object/from16 v0, p0
iget-object v0, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mContext:Landroid/content/Context;
move-object/from16 v18, v0
invoke-virtual/range {v18 .. v18}, Landroid/content/Context;->getContentResolver()Landroid/content/ContentResolver;
[COLOR="Green"]move-result-object v13
[/COLOR]
[COLOR="Blue"]const-string v7, "volbtn_music_controls"
const/4 v9, 0x0
invoke-static {v13, v7, v9}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v3
move-object/from16 v0, p0
iput v3, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnMusicControls:I
const-string v7, "volbtn_timeout"
const/16 v9, 0x190
invoke-static {v13, v7, v9}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v3
move-object/from16 v0, p0
iput v3, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnTimeout:I
const-string v7, "volbtn_vol_up"
const/16 v9, 0x57
invoke-static {v13, v7, v9}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v3
move-object/from16 v0, p0
iput v3, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnVolUp:I
const-string v7, "volbtn_vol_down"
const/16 v9, 0x58
invoke-static {v13, v7, v9}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v3
move-object/from16 v0, p0
iput v3, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnVolDown:I[/COLOR]
Android L Version of previous section:
New code is in BLUE
Code:
.method public updateSettings()V
.locals 19
move-object/from16 v0, p0
iget-object v15, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mContext:Landroid/content/Context;
invoke-virtual {v15}, Landroid/content/Context;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v9
[COLOR="Blue"]const-string v7, "volbtn_music_controls"
const/4 v10, 0x0
invoke-static {v9, v7, v10}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v3
move-object/from16 v0, p0
iput v3, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnMusicControls:I
const-string v7, "volbtn_timeout"
const/16 v10, 0x190
invoke-static {v9, v7, v10}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v3
move-object/from16 v0, p0
iput v3, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnTimeout:I
const-string v7, "volbtn_vol_up"
const/16 v10, 0x57
invoke-static {v9, v7, v10}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v3
move-object/from16 v0, p0
iput v3, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnVolUp:I
const-string v7, "volbtn_vol_down"
const/16 v10, 0x58
invoke-static {v9, v7, v10}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v3
move-object/from16 v0, p0
iput v3, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnVolDown:I[/COLOR]
Smali edit
\com\android\internal\policy\impl\PhoneWindowManager$SettingsObserver.smali
Search for string "immersive_mode_confirmations" and add new section in BLUE right above that line.
Make sure the values above in GREEN match the new code.
Code:
const-string v1, "default_input_method"
invoke-static {v1}, Landroid/provider/Settings$Secure;->getUriFor(Ljava/lang/String;)Landroid/net/Uri;
move-result-object v1
invoke-virtual {[COLOR="Green"]v0, v1, v4, p0, v5[/COLOR]}, Landroid/content/ContentResolver;->registerContentObserver(Landroid/net/Uri;ZLandroid/database/ContentObserver;I)V
[COLOR="Blue"] const-string v1, "volbtn_music_controls"
invoke-static {v1}, Landroid/provider/Settings$System;->getUriFor(Ljava/lang/String;)Landroid/net/Uri;
move-result-object v1
invoke-virtual {v0, v1, v4, p0, v5}, Landroid/content/ContentResolver;->registerContentObserver(Landroid/net/Uri;ZLandroid/database/ContentObserver;I)V
const-string v1, "volbtn_timeout"
invoke-static {v1}, Landroid/provider/Settings$System;->getUriFor(Ljava/lang/String;)Landroid/net/Uri;
move-result-object v1
invoke-virtual {v0, v1, v4, p0, v5}, Landroid/content/ContentResolver;->registerContentObserver(Landroid/net/Uri;ZLandroid/database/ContentObserver;I)V
const-string v1, "volbtn_vol_up"
invoke-static {v1}, Landroid/provider/Settings$System;->getUriFor(Ljava/lang/String;)Landroid/net/Uri;
move-result-object v1
invoke-virtual {v0, v1, v4, p0, v5}, Landroid/content/ContentResolver;->registerContentObserver(Landroid/net/Uri;ZLandroid/database/ContentObserver;I)V
const-string v1, "volbtn_vol_down"
invoke-static {v1}, Landroid/provider/Settings$System;->getUriFor(Ljava/lang/String;)Landroid/net/Uri;
move-result-object v1
invoke-virtual {v0, v1, v4, p0, v5}, Landroid/content/ContentResolver;->registerContentObserver(Landroid/net/Uri;ZLandroid/database/ContentObserver;I)V
[/COLOR]
const-string v1, "immersive_mode_confirmations"
Android L UPDATE:
Additional Android L Changes
Additional changes for Android L are here --->> Android L amended guide
Credits: @loserskater for the orginal mod HERE ; @jeboo for his GitHub HERE @sac23 for the tremendous help getting framework.jar changes

tdunham said:
[Guide How-to] KitKat 4.4.2 Music Control - Volume Music Skip and More
This guide requires knowledge of decompiling and compiling apk and smali files.
It is only a guide.
I do not take requests. If you want this mod for your rom, get with a dev with the knowledge to get it done.
I have attached android.policy files for diffing in case you get stuck on a section.
Click to expand...
Click to collapse
Thank you, thank. You are a god...
Sent from my SM-T320 using Xparent BlueTapatalk 2

Gotta agree with the above post... You are awesome dude...
Are you about to ask a question? Hold up. Before you do that, did you check HERE? or HERE? :good:
FOR ANY ND8 RELATED QUESTIONS PLEASE VISIT THIS THREAD ----> TouchWiz 4.4 KitKat ND8 myth busters
My KITKAT 4.4.2 Touchwiz, Blue PCB Theme
TOUCHWIZ KITKAT ANIMATED PULLDOWN BAR AND ANIMATED PULLDOWN BACKGROUND MOD​

Another awesome guide TD! Thank you for sharing your knowledge with the community!
Sent from my SM-G900P using Tapatalk

@tdunham, you point to the VolBtnSettings in the settings.apk, but you didn't attach the files. Just giving you a heads up. Glad to see my work lives on! Thanks for updating this :good:

loserskater said:
@tdunham, you point to the VolBtnSettings in the settings.apk, but you didn't attach the files. Just giving you a heads up. Glad to see my work lives on! Thanks for updating this :good:
Click to expand...
Click to collapse
Thanks. I'm glad someone's looking out for me.

Thanks a ton for sharing your knowledge. You're a real class act man!

Appreciate you sharing the knowledge, thank you sir.

Delete

tdunham said:
Thanks. I'm glad someone's looking out for me.
Click to expand...
Click to collapse
Hey @tdunham...this is the first time for me using <SwitchPreferenceScreen in any mod...there shouldn't be a problem with me adding an icon to line should there?
<SwitchPreferenceScreen android:icon="@drawable/xxxxxxxx" android:title="@string/volbtn_toggle_title" android:key="volbtn_music_controls" android:fragment="com.android.settings.VolBtnSettings" />
Edit: I'll post pics when I'm done

deuce_biggins said:
Hey @tdunham...this is the first time for me using <SwitchPreferenceScreen in any mod...there shouldn't be a problem with me adding an icon to line should there?
<SwitchPreferenceScreen android:icon="@drawable/xxxxxxxx android:title="@string/volbtn_toggle_title" android:key="volbtn_music_controls" android:fragment="com.android.settings.VolBtnSettings" />
Click to expand...
Click to collapse
I don't see why not.
The good thing about SecSettings is that modifying it won't cause a bootloop, just a force close when you try to access the part of it that isn't coded properly.
However, why set an icon? This is a submenu of sounds and not a single item has an icon, stock Touchwiz of course. I just checked on my Galaxy SIII KitKat and the same goes there.
My SS is attached (without this menu item, we use CustomSettings.apk for toggles, colorizers & scripts).

Anyone get the android.policy edits right on the Sprint Note 3?

If someone with the know-how could take a look at my PhoneWindowsManager I'd sure be greatful. I'll leave it here......PhoneWindowsManager.smali
This is an error I'm getting when I...1 2 3 4 screenshot!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you

Once again my Sammy tablet is a bit diff...
Code:
.method public updateSettings()V
.locals 17
.prologue
.line 1714
move-object/from16 v0, p0
iget-object v12, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mContext:Landroid/content/Context;
invoke-virtual {v12}, Landroid/content/Context;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v8
.line 1715
.local v8, resolver:Landroid/content/ContentResolver;
const/4 v9, 0x0
.line 1722
.local v9, updateRotation:Z
const-string v12, "multi_window_enabled"
const/4 v13, 0x0
const/4 v14, -0x2
invoke-static {v8, v12, v13, v14}, Landroid/provider/Settings$System;->getIntForUser(Landroid/content/ContentResolver;Ljava/lang/String;II)I
move-result v1
.line 1726
.local v1, enableMultiWindowUISetting:I
move-object/from16 v0, p0
iget-object v13, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mLock:Ljava/lang/Object;
monitor-enter v13
.line 1728
:try_start_0
move-object/from16 v0, p0
iget-boolean v12, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mIsMultiWindowEnabled:Z
if-eqz v12, :cond_1
.line 1729
move-object/from16 v0, p0
iget-boolean v12, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mSystemReady:Z
if-eqz v12, :cond_1
.line 1730
move-object/from16 v0, p0
iget v12, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mEnableMultiWindowUISetting:I
const/4 v14, -0x1
if-ne v12, v14, :cond_c
.line 1731
move-object/from16 v0, p0
iget-object v12, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mContext:Landroid/content/Context;
invoke-virtual {v12}, Landroid/content/Context;->getContentResolver()Landroid/content/ContentResolver;
move-result-object v12
const-string v14, "multi_window_flashbar_shown"
const/4 v15, -0x1
const/16 v16, -0x2
move/from16 v0, v16
invoke-static {v12, v14, v15, v0}, Landroid/provider/Settings$System;->getIntForUser(Landroid/content/ContentResolver;Ljava/lang/String;II)I
move-result v6
.line 1734
.local v6, lastFlashBarVisibility:I
if-nez v6, :cond_b
Where and how to put this last piece of code. in. I have tried several times, but all I get is Sammy Logo. No boot...
Code:
#Music Mod
const-string v7, "volbtn_music_controls"
const/4 v9, 0x0
invoke-static {v12, v7, v9}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v3
move-object/from16 v0, p0
iput v3, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnMusicControls:I
const-string v7, "volbtn_timeout"
const/16 v9, 0x190
invoke-static {v12, v7, v9}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v3
move-object/from16 v0, p0
iput v3, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnTimeout:I
const-string v7, "volbtn_vol_up"
const/16 v9, 0x57
invoke-static {v12, v7, v9}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v3
move-object/from16 v0, p0
iput v3, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnVolUp:I
const-string v7, "volbtn_vol_down"
const/16 v9, 0x58
invoke-static {v12, v7, v9}, Landroid/provider/Settings$System;->getInt(Landroid/content/ContentResolver;Ljava/lang/String;I)I
move-result v3
move-object/from16 v0, p0
iput v3, v0, Lcom/android/internal/policy/impl/PhoneWindowManager;->mVolBtnVolDown:I
#End of Add - Music Mod

1brainsurgeon said:
If someone with the know-how could take a look at my PhoneWindowsManager I'd sure be greatful. I'll leave it here......PhoneWindowsManager.smali
This is an error I'm getting when I...1 2 3 4 screenshot!
Thank you
Click to expand...
Click to collapse
The error is somewhere on or around line 16553 is what the baksmali is reporting there.

Gunthermic said:
Once again my Sammy tablet is a bit diff...
Click to expand...
Click to collapse
Line right before adding the new section:
Code:
move-result-object v8
You didn't use v8 in the 4 places like I recommended in the guide to replace v13 in the new code.

tdunham said:
Line right before adding the new section:
Code:
move-result-object v8
You didn't use v8 in the 4 places like I recommended in the guide to replace v13 in the new code.
Click to expand...
Click to collapse
Will try again. I actually tried be and v12.. but maybe the placement is the screwy part... will try and see.
Thank you for helping tdun
Sent from my SM-T320 using Xparent BlueTapatalk 2

Gunthermic said:
Will try again. I actually tried be and v12.. but maybe the placement is the screwy part... will try and see.
Click to expand...
Click to collapse
It HAS to be v8 in those 4 places but maybe we need to change some other values too. Let me know how you make out.

tdunham said:
It HAS to be v8 in those 4 places but maybe we need to change some other values too. Let me know how you make out.
Click to expand...
Click to collapse
I will try v8... I think that is the area that can cause a big issue... I will report back....
Sent from my SM-T320 using Xparent BlueTapatalk 2

Question. I haven't had time to try the android policy edits yet but finished settings.... I tried to click the menu in settings to see if it works.... But get an fc in tap, menu won't even open..... Is this due to not doing the policy edits yet.... Or should it at least open anyways? Curious if I should go back thru settings or not.
Thanks.