Trying to install the Cynogen ICS ROM, and when installing the .zip, it loads the Samsung flash screen with Cynogen, then get the green guy and loads of text for about half a second, then it just reboots. Over and over for about 10 mins. WHat went wrong? What should I do?
It happend the same to me.
I just removed the battery and put it back, entered in CWM and reinstalled the ROM.
Good luck!
I somehow got into a recovery mode, but with the assumption it would all go wrong again, tried to install the .zip Darky rom instead, went through the process and said it worked but then it just went back to the Cynogen loop problem!? I just tried a Restore instead, but I haven't rebooted yet, should I wipe everything again, and try the ICM .zip again?
Yep, just go with the whipe. I hope you did a backup.
OK turns out the Restore failed, so now trying to reinstall ICS .zip again. fingers crossed!
yep backed it up, not that its seems to have helped.
Well now it's stuck in the Galaxy S bootscreen...
that really sucks....did you deactivated the lagfix before running the rom?
If the problem persists you have to run a basic ROM using ODIN.
Yes deactivated the lagfixI can't get into recovery or anything now, except download mode.
Download mode is all you need to run a ROM with Odin.
I recommend Amestris, it is a good ROM, good battery life but the thread in not complete, there are some files missing...for now.
I've put some older ROM on I had, then tried to install ICS again but now when I use Clockwork, and select the file it goes to recovery but I can't select any zip files, just reboot back to this awful old ROM!
I had same issue when I installed ics, what I did that worked was pull battery and go back into cwm, reflashed ics zip and it fully installed that time. Had same experience when flashing cm7 before.
Not getting anywhere with this. I get an option to install zip from sdcard which is where the update is (an where the darky update also is which worked), but there is an option to update from internal SD, which is not where the file is. Is it in the wrong place?
I think you would be best to use Odin 1.3 to flash DarkyROM Ficeto JVT base rom.
are you sure those files are still on your sd card?
The reason you need to pull the battery and reflash the ICS rom a few times is because Samsung ROM (most) have a different partition layout to CM7 based roms (which the ICS port is one).
GL.
Update: Solved
Thank you for everyone's reply and help.
What worked for me:
Downloaded Mobile ODIN v3.10
Downloaded Goku v1.5-10 TAR (Kernel-Goku-V1.5-10.tar)
Flashed firmware with Mobile Odin with MD5 signature check
Can now boot into recovery
Currently on:
CM9 Version 9-20120515-Nightly-n7000
Build date Tue May 15 23:06:26
Kernel version 3.0.30-CM-q6804ca8
I cant seem to get into recovery while using any of the ICS roms. I've tried several CM9 bulds, Kindgroid, Stunner and a few others. I doesn't matter if i try to access it through the hardware keys (press and hold the Volume UP+Home+Power) or through one of the software options (reboot into recovery). After the samsung logo apears the screen will turn black. I'll have to restart the phone with the power key.
Everything else seems to be fine. I can get into download mode just fine. I have no problems downgrading to a gingerbread rom from pc odin or mobile odin. Also theirs no problem for me getting into recovery from any of the gingerbread roms I've tried.
I first noticed this while I was on ICS stunner. It was the build with the affected kernel. Everything was running smooth for me. Recovery and everything else seemed to be working fine but when i started reading posts about the brick scare i became afraid of doing anything else on that kernel.
I followed Entropy512's advise:
If you are running an affected kernel:
STOP USING IT IMMEDIATELY. FLASH A SAFE KERNEL USING ODIN/HEIMDALL.
DO NOT wipe in recovery
DO NOT flash anything else in recovery
In general, DO NOT use recovery at all
I flashed his DAFUQ releas using mobile odin while still on stunner. Everything seemed to go smooth. After flashing I checked under setting -> about phone -> kernal version and his kernel was properly displayed. I tried going into recovery but the screen would turn black after the samsung logo.
I've must of done something wrong while flashing Entropy512's kernel because ever since I flashed his kernel I havent been able to get into recovery while running an ICS rom.
TL;DR
Cant access recovery from ICS roms but recovery works fine while on gingerbread roms
Did you try before flashing ics do a 3 wipes first while in girgerbread for a clean installation?
jonpaslim said:
Did you try before flashing ics do a 3 wipes first while in girgerbread for a clean installation?
Click to expand...
Click to collapse
Yeah it was one of the 1st things I tried when I encountered the problem.
Can anyone confirm if the recovery is stored in the same place for both ics and gingerbread? I feel like I might have damaged some sectors and might have some bad blocks. Everything else seems fine though.
runnin4mayor said:
Yeah it was one of the 1st things I tried when I encountered the problem.
Can anyone confirm if the recovery is stored in the same place for both ics and gingerbread? I feel like I might have damaged some sectors and might have some bad blocks. Everything else seems fine though.
Click to expand...
Click to collapse
How about 4 wipes including format/system and also use jbroid even though your not installing a kernel but rom still use it.
Flash stock GB rom. Reroot it and then check everything is working fine? If yes then flash ICS rom.
Sent from my GT-N7000 using XDA Premium App
Thanks for everyone's reply
I've tried jbroid and formatted system but it didnt help. Like I said... everything is fine on GB, recovery and everything else. I've been back and forth several times already. Everything seems to be working fine on ICS too. I just can't access recovery no matter what I do while on ICS. I'll try wiping 4 times from gingerbread this time.
runnin4mayor said:
Thanks for everyone's reply
I've tried jbroid and formatted system but it didnt help. Like I said... everything is fine on GB, recovery and everything else. I've been back and forth several times already. Everything seems to be working fine on ICS too. I just can't access recovery no matter what I do while on ICS. I'll try wiping 4 times from gingerbread this time.
Click to expand...
Click to collapse
In the system setting of the phone there is back up and reset and there you can format usb storage, this will format your internal sd, this is in ics setting i forgot about gingerbread. You can do this while in gingerbread to be safe, format your internal sd.
jonpaslim said:
In the system setting of the phone there is back up and reset and there you can format usb storage, this will format your internal sd, this is in ics setting i forgot about gingerbread. You can do this while in gingerbread to be safe, format your internal sd.
Click to expand...
Click to collapse
Yes.. I've tried that before installing my current ICS rom. Actually I formatted both the internal and external SD while still on GB. I'm still wondering if the recovery stored in the same partition space in both GB and ICS. I can't understand why I can access CWM recovery on GB but not while I'm on ICS.
i too have the same problem even though i can access cwm manually cant install any zip file but if i use abyssnote kernell everything works fine the problem started when switched over to ics from gb
runnin4mayor said:
Thanks for everyone's reply
I've tried jbroid and formatted system but it didnt help. Like I said... everything is fine on GB, recovery and everything else. I've been back and forth several times already. Everything seems to be working fine on ICS too. I just can't access recovery no matter what I do while on ICS. I'll try wiping 4 times from gingerbread this time.
Click to expand...
Click to collapse
Wiping more than once is pointless... I don't know where people get silly ideas like "wipe 3 times".
When you switched to something else, did you flash it using CWM or Odin?
Try flashing a different kernel using Odin. I have seen that in rare cases on some devices, doing something like the following:
Flash one kernel from a recovery
Reboot directly to recovery using CWM's Advanced menu
At this point, the device will be stuck either always booting to recovery or never booting to recovery
Flashing a kernel with Odin/Heimdall - NOT "Mobile Odin" (I hate that name because it's completely different from Odin) or CWM often breaks these loops.
problem accessing recovery
hi today i solved my problem of not unable to find cwm in programs and flashing zip files from recovery while on ics. first i flashed abyssnote kernell then rebooted into recovery did all the three wipes and in addition formatted data, system and cache. then used jbroid kernell cleaner. installed fusion rom flashed green theme rebooted at last could see cwm in programs can flash any zip file now
Thank you sir for your swift action.
deepalakshmidas said:
hi today i solved my problem of not unable to find cwm in programs and flashing zip files from recovery while on ics. first i flashed abyssnote kernell then rebooted into recovery did all the three wipes and in addition formatted data, system and cache. then used jbroid kernell cleaner. installed fusion rom flashed green theme rebooted at last could see cwm in programs can flash any zip file now
Click to expand...
Click to collapse
How did you flash abyssnote kernel without being able to enter recovery?
Edit: Solved my problem. Updated 1st post
Hello Folks,
First I have to say that I watched the noob video and read everything about E:Error in /mnt/sdcard/cm-10.0.0.-galaxysmtd.zip (Status 7) on this forum and what google gave me.
My situation:
PC OS is Windows 7 64bit (if someone needs to know)
Phone:
Samsung Galaxy S GT-I9000
SSN: I9000GSMH
What happend:
I bought a used phone about two months ago with latest installed stock rom 2.3.5 it is. Then i downloaded cm-10-20121126-NIGHTLY-galaxysmtd and followed the instructions on wiki.cyanogenmod.org/wiki/Samsung_Galaxy_S:_Full_Update_Guide. I installed CWM with Heimdall Suite. Everything worked well.
Today I decided to install a newer version of CM, I downloaded the cm-10-20121210-NIGHTLY-galaxysmtd and cm-10.0.0-galaxysmtd and copied them both on the phone memory. I turned off the phone and turned it on in recovery mod, and I got the recovery mode that was on cm-10-20121126-NIGHTLY-galaxysmtd installed. It wasn't the standard CWM that I installed with Heimdall Suite. I wiped with it data and cache and installed cm-10-20121210-NIGHTLY-galaxysmtd and then rebooted the phone. But the phone got stuck and didn't want to reboot. So i tried to go to recovery mod again to reinstall the cm-10.0.0-galaxysmtd but the phone couldn't access the recovery mod anymore.
After that I reinstalled with Heimdall Suite the ClockwordMod Recovery v2.5.1.0 SpeedMod Kernel like the first time I did. and successfully booted to recovery mod and again wiped cache and data and tried to install cm-10.0.0-galaxysmtd when i got the error
This is the image, just copy/paste in address bar.
imageshack.us/f/685/07032008448.jpg
So, now my phone has no OS installed.
There are some other issues too, I can't mount my external sd card in CWM, why, I don't know, so I only have cm-10-20121210-NIGHTLY-galaxysmtd and cm-10.0.0-galaxysmtd on my phone memory to install.
I would really really like if someone could help me to solve my problem, I have no other phone. And please when you tell to install something give me the needed link because I really downloaded a lot of things that didn't work.
adobih said:
Hello Folks,
First I have to say that I watched the noob video and read everything about E:Error in /mnt/sdcard/cm-10.0.0.-galaxysmtd.zip (Status 7) on this forum and what google gave me.
My situation:
PC OS is Windows 7 64bit (if someone needs to know)
Phone:
Samsung Galaxy S GT-I9000
SSN: I9000GSMH
What happend:
I bought a used phone about two months ago with latest installed stock rom 2.3.5 it is. Then i downloaded cm-10-20121126-NIGHTLY-galaxysmtd and followed the instructions on wiki.cyanogenmod.org/wiki/Samsung_Galaxy_S:_Full_Update_Guide. I installed CWM with Heimdall Suite. Everything worked well.
Today I decided to install a newer version of CM, I downloaded the cm-10-20121210-NIGHTLY-galaxysmtd and cm-10.0.0-galaxysmtd and copied them both on the phone memory. I turned off the phone and turned it on in recovery mod, and I got the recovery mode that was on cm-10-20121126-NIGHTLY-galaxysmtd installed. It wasn't the standard CWM that I installed with Heimdall Suite. I wiped with it data and cache and installed cm-10-20121210-NIGHTLY-galaxysmtd and then rebooted the phone. But the phone got stuck and didn't want to reboot. So i tried to go to recovery mod again to reinstall the cm-10.0.0-galaxysmtd but the phone couldn't access the recovery mod anymore.
After that I reinstalled with Heimdall Suite the ClockwordMod Recovery v2.5.1.0 SpeedMod Kernel like the first time I did. and successfully booted to recovery mod and again wiped cache and data and tried to install cm-10.0.0-galaxysmtd when i got the error
This is the image, just copy/paste in address bar.
imageshack.us/f/685/07032008448.jpg
So, now my phone has no OS installed.
There are some other issues too, I can't mount my external sd card in CWM, why, I don't know, so I only have cm-10-20121210-NIGHTLY-galaxysmtd and cm-10.0.0-galaxysmtd on my phone memory to install.
I would really really like if someone could help me to solve my problem, I have no other phone. And please when you tell to install something give me the needed link because I really downloaded a lot of things that didn't work.
Click to expand...
Click to collapse
you having the wrong CWm installed, you can go to this link to download the cf-root kernel. http://forum.xda-developers.com/showthread.php?t=788108 hope this will help .
BTW when flashing JB from GB you need to flash CM9 then follow by CM10, if you can try flash it from GB 2.3.6 (E.g xxjvu)
i try flashing JB from GB is work if i flash twice but i got missing IMEI. so i suggest you following this step to flash.
GB(stock rom with ROOT) - ICS(CM7) - JB(CM10)
Samtan4326 said:
you having the wrong CWm installed, you can go to this link to download the cf-root kernel. http://forum.xda-developers.com/showthread.php?t=788108 hope this will help .
BTW when flashing JB from GB you need to flash CM9 then follow by CM10, if you can try flash it from GB 2.3.6 (E.g xxjvu)
i try flashing JB from GB is work if i flash twice but i got missing IMEI. so i suggest you following this step to flash.
GB(stock rom with ROOT) - ICS(CM7) - JB(CM10)
Click to expand...
Click to collapse
First off all thanks for helping.
I tried this one:
CF-ROOT-4.4-I9000BGJW5-1187857
CF-Root-4.4-I9000BOJW6-CL1177078
CF-Root-JP6-v1.2-Busybox-1.17.1 (this one didn't want to start recovery at all)
CF-Root-XX_OXA_JW4-v4.4-CWM3RFS
all I got from all of them is this
imageshack.us/f/805/08032008449.jpg (copy link to address bar )
Member Chainfire said "THIS IS NOT A ROM - it is only a kernel. You need to have a firmware already on your device"
I don't know really what that means. Probably that I have to install something else too, but what ?
Please can you tell me ?
And which of these CF-Roots is the right one, or the newest one, or how do recognize that ?
Thanks everyone who helps me.
eba
Well, I solved my problem, now i have cm-10.0.0-galaxysmtd ROM installed. If someone has this problem, this is one way how to solve it (but doesn't mean it's the best one).
If you have no ROM installed on your I9000 and don't know which kernel to use, try this way:
Watch this video on YouTube that user "Puggered UK" uploaded:
youtube.com/watch?v=iRnH13sRAIc
- You can skip to 1.52 because you don't have any ROM on your phone, and download the EZ Odin package from the link in the About section (4shared.com/archive/TuHUfVjA/EZOdin.html).
- Start EZ Odin, put the PIT, PDA, PHONE and CSC file in the right box, connect your phone in download mode to the PC and press START, and wait till the process is complete.
- After a while you should have Android 2.3.? installed on your phone.
- Update Google market to Google play, then update ROM Manager, and start ROM Manager. Choose to Flash Clockwork Mod Recovery, choose your phone and flash it.
- Copy on your internal sd memory cm-10.0.0-galaxysmtd that you downloaded from CyanogenMod web site.
- Restart your phone in Recovery mod, wipe data/cache, and install cm-10.0.0-galaxysmtd from internal sd card.
- Then, when it's done restart the phone, and do the last step again in Cyanogen CW recovery.
- After it's done, restart the phone and you will have CM 10 on your phone installed.
Or just watch the video and you will se what to do.
adobih said:
Well, I solved my problem, now i have cm-10.0.0-galaxysmtd ROM installed. If someone has this problem, this is one way how to solve it (but doesn't mean it's the best one).
If you have no ROM installed on your I9000 and don't know which kernel to use, try this way:
Watch this video on YouTube that user "Puggered UK" uploaded:
youtube.com/watch?v=iRnH13sRAIc
- You can skip to 1.52 because you don't have any ROM on your phone, and download the EZ Odin package from the link in the About section (4shared.com/archive/TuHUfVjA/EZOdin.html).
- Start EZ Odin, put the PIT, PDA, PHONE and CSC file in the right box, connect your phone in download mode to the PC and press START, and wait till the process is complete.
- After a while you should have Android 2.3.? installed on your phone.
- Update Google market to Google play, then update ROM Manager, and start ROM Manager. Choose to Flash Clockwork Mod Recovery, choose your phone and flash it.
- Copy on your internal sd memory cm-10.0.0-galaxysmtd that you downloaded from CyanogenMod web site.
- Restart your phone in Recovery mod, wipe data/cache, and install cm-10.0.0-galaxysmtd from internal sd card.
- Then, when it's done restart the phone, and do the last step again in Cyanogen CW recovery.
- After is done, restart the phone and you will have CM 10 on your phone installed.
Or just watch the video and you will se what to do.
Click to expand...
Click to collapse
hey,
had that problem too, yesterday. will try your suggestions later and report back!
hope it helps...
Grz
beckzz said:
hey,
had that problem too, yesterday. will try your suggestions later and report back!
hope it helps...
Grz
Click to expand...
Click to collapse
Well, I help you as much as I can and know, just write me where you stuck. And if you have some difficulties explaining it in English, dann kannst du mir auch auf deutsch schreiben, das verstehe ich auch
I had this status 7 thing 2 yesterday while installing cm10. It also seemed I couldnt get into recovery. What I had to do is flash the zip 4 times. First time it got stuck at boot.
So I took battery out & try to get in to recovery (volume up+home button+power button & -->release buttons the moment u see bootanimation<--) but it started bootlooping/got stuck again.
So I took battery out again, did the 3 button combo for the second time & I waited a little longer, a minute maybe 2 & it went to recovery. (I guess the first time it didnt went straight to recovery like it normally does, I wasnt patient enough). If not getting into recovery with waiting the first time just try to keep getting in recovery with 3 button combo & wait a couple of minutes. Eventually it does. I had the same thing 2 months ago coming from jb-->ics-->cm10, thats how I remembered.
Didnt wipe a thing just went straight to the zipfile & flashed it in total 4 or 5 times till it said install completed on the screen. Didnt wipe nothing in between the flashing
Then flashed gapps & voila
Donovan662 said:
I had this status 7 thing 2 yesterday while installing cm10. It also seemed I couldnt get into recovery. What I had to do is flash the zip 4 times. First time it got stuck at boot.
So I took battery out & try to get in to recovery (volume up+home button+power button & release buttons the moment u see bootanimation) but it started bootlooping/got stuck again.
So I took battery out again, did the 3 button combo for the second time & I waited a little longer, a minute maybe 2 & it went to recovery. (I guess the first time it didnt went straight to recovery like it normally does, I wasnt patient enough)
Didnt wipe a thing just went straight to the zipfile & flashed it in total 4 or 5 times till it said install completed on the screen
Then flashed gapps & voila
Click to expand...
Click to collapse
I tried like hundred times or more, but every time with the same result and I also tried with different kernels without success. Maybe some other error caused your status 7 error than mine. But anyway, it's always good to try all possibilities to resolve the problem.
Haha I went crazy not getting into recovery 2 months ago I did it at least 15 times till it eventually got into recovery. Weird cuz I released it the moment I saw cyanogen boot animation. I had to wait a lil longer after releasing so it seems & better timing maybe but only with flashing cm10 from stock. The error was the same tho I saw your picture
Donovan662 said:
Haha I went crazy not getting into recovery 2 months ago I did it at least 15 times till it eventually got into recovery. Weird cuz I released it the moment I saw cyanogen boot animation. I had to wait a lil longer after releasing so it seems & better timing maybe but only with flashing cm10 from stock. The error was the same tho I saw your picture
Click to expand...
Click to collapse
Unfortunately I wasn't that lucky, but I tell you something else. Now I know that no matter what I do and how badly i brick my phone I can always use that method to bring it to life back. So it's kind of final help that works if nothing else works
by the way did you apply sdcard:update zip? Or choose zip from sd card?
Donovan662 said:
by the way did you apply sdcard:update zip? Or choose zip from sd card?
Click to expand...
Click to collapse
I choose zip from sd card because I forgot to rename the file before copying to sd card, and when I lost my bricked my phone it was already to late to rename it. But i don't think that that was the problem, I mean it's just a name string that has no meaning after all.
hey guys,
finally i made it...
thx adobih for your offer, but i'll try to do it in english...think(hope) my english is not that bad
so my problem was the following, slightly different from yours:
i bought a used Galaxy S I9000 for my girlfried as a christmas present cause her Galaxy Ace is the worst Android-phone i ever saw ^^
this "new" Galaxy S has never been rooted before, it never enjoyed a custom ROM - completely stock with 2.2.1 froyo ^^
Here is, what i did to get cm10 stable to work:
1. Updated android to latest official android 2.3.6 with Samsung Kies
2. then i followed the step "Installing the ClockworkMod Recovery" from here
--- ATTENTION: Heimdall 1.3.2 screwed things up (due to a bug i think, only download-mode was available afterwards), use Heimdall 1.3.1 to be safe
3. then i pushed cm 9.1 stable, cm 10.0 stable and latest gapps for 10.0 to the device
4. then i flashed cm 9.1 stable via CWM - an Error occured
5. then i selected "reboot system" in CWM (NOT "reboot recovery"!!)
6. device reboots and starts to install CM 9.1 Stable on its own
7. booted to the now "new" CWM installed by cm 9.1 zip
8. flashed cm 9.1 zip again
8. booted cm 9.1 normally, everything was working fine
9. booted into cwm
10. flashed cm 10.0 zip - an error occured
11. then i selected "reboot system" in CWM (NOT "reboot recovery"!!)
12. device reboots and starts to install CM 10.0 Stable on its own
13. booted to the now "new" CWM installed by cm 10.0 zip
14. flashed cm 10.0 zip again
15. a warning occured "incompatible filesystem, flash again to confirm"
16. flashed cm 10.0 zip again
17. booted cm 10.0 normally, everything was working fine
18. booted CWM again, flashed gapps
19. booted cm 10.0 normally, everything was working fine
I was not able to flash cm 10.0 directly after flashing codeworxs kernel with heimdall. think this is related to changed partition sizes and stuff...
device only booted to CWM again, i was not able to boot the system - bootloop. Once i tried to flash cm10, there was no success when trying to flash cm 9 after that.
i tried it 3-4 times to flash cm 10 directly with no success. i checked md5 sums of the downloaded files, but everything was fine.
the detour with cm 9.1 was the only way to get it to work.
after trying to flash cm10 directly it always screwed something and was not able to get any further.
to start again, i had to go back to stock with odin. For that i used these instructions and files. (its in german, but very well illustrated, so all of you should be able to follow the steps).
When starting from stock, you can follow the steps above and everything should be fine.
took me some hours to figure out the correct order of the steps....
this is a slightly different problem as the one in op, so i decided to provide my solution here.
the heimdall 1.3.2-bug occured with the i9000 of a friend of mine, too. only heimdall 1.3.1 did what it was supposed to.
for all people interested: i decided to flash semaphore kernel for better customization options....running pretty well
EDIT: thx to everybody in this thread posting your experiences, all together it pointed me to the solution.. THX!
Grz
beckzz said:
hey guys,
finally i made it...
thx adobih for your offer, but i'll try to do it in english...think(hope) my english is not that bad
so my problem was the following, slightly different from yours:
i bought a used Galaxy S I9000 for my girlfried as a christmas present cause her Galaxy Ace is the worst Android-phone i ever saw ^^
this "new" Galaxy S has never been rooted before, it never enjoyed a custom ROM - completely stock with 2.2.1 froyo ^^
Here is, what i did to get cm10 stable to work:
1. Updated android to latest official android 2.3.6 with Samsung Kies
2. then i followed the step "Installing the ClockworkMod Recovery" from here
--- ATTENTION: Heimdall 1.3.2 screwed things up (due to a bug i think, only download-mode was available afterwards), use Heimdall 1.3.1 to be safe
3. then i pushed cm 9.1 stable, cm 10.0 stable and latest gapps for 10.0 to the device
4. then i flashed cm 9.1 stable via CWM - an Error occured
5. then i selected "reboot system" in CWM (NOT "reboot recovery"!!)
6. device reboots and starts to install CM 9.1 Stable on its own
7. booted to the now "new" CWM installed by cm 9.1 zip
8. flashed cm 9.1 zip again
8. booted cm 9.1 normally, everything was working fine
9. booted into cwm
10. flashed cm 10.0 zip - an error occured
11. then i selected "reboot system" in CWM (NOT "reboot recovery"!!)
12. device reboots and starts to install CM 10.0 Stable on its own
13. booted to the now "new" CWM installed by cm 10.0 zip
14. flashed cm 10.0 zip again
15. a warning occured "incompatible filesystem, flash again to confirm"
16. flashed cm 10.0 zip again
17. booted cm 10.0 normally, everything was working fine
18. booted CWM again, flashed gapps
19. booted cm 10.0 normally, everything was working fine
I was not able to flash cm 10.0 directly after flashing codeworxs kernel with heimdall. think this is related to changed partition sizes and stuff...
device only booted to CWM again, i was not able to boot the system - bootloop. Once i tried to flash cm10, there was no success when trying to flash cm 9 after that.
i tried it 3-4 times to flash cm 10 directly with no success. i checked md5 sums of the downloaded files, but everything was fine.
the detour with cm 9.1 was the only way to get it to work.
after trying to flash cm10 directly it always screwed something and was not able to get any further.
to start again, i had to go back to stock with odin. For that i used these instructions and files. (its in german, but very well illustrated, so all of you should be able to follow the steps).
When starting from stock, you can follow the steps above and everything should be fine.
took me some hours to figure out the correct order of the steps....
this is a slightly different problem as the one in op, so i decided to provide my solution here.
the heimdall 1.3.2-bug occured with the i9000 of a friend of mine, too. only heimdall 1.3.1 did what it was supposed to.
for all people interested: i decided to flash semaphore kernel for better customization options....running pretty well
EDIT: thx to everybody in this thread posting your experiences, all together it pointed me to the solution.. THX!
Grz
Click to expand...
Click to collapse
More or less I think we both had the same problem, because I also used this link wiki.cyanogenmod.org/wiki/Samsung_Galaxy_S:_Full_Update_Guide and heimdall 1.3.2 for flashing my phone. Just it always finished successfully so I didn't realize it was the root of all problems. I used also then Odin from the youtube video that I posted in a few posts earlier, installed Android 2.3.6 and then installed ROM Manager from Google play, and used the app to flash to ClockworkMod Recovery. After that I installed directly CM10 stable with success, and without CM9 detour.
Hi all, my name is Daniel.
I am using a motorola Milestone A853 for the past one year and never faced any issue while rooting or installing custom roms right upto cm10.
from last two months the milestone has not been working properly. It so happened i had installed CM 9.0.1d and everything worked fine. but once the battery died the phone did not boot up and was stuck on moto boot logo and kept restarting from there. I tried to go into open recovery (fufu minimod) using the X+power key and it goes into recovery but after loading recovery it did not display any options and the other text was red in color and it showed the error failed to load menu.init. I replaced the update.zip file along with the open recovery folder, but still nothing worked. I then tried another open recovery but still open recovery never loaded. Then i SBF'ed the device and went back to stock and was able to use my phone again. But then when i try to root the device again i am not able to root using vulnerable SBF as it does not install though RSDLite shows pass. Then i used superoneclick to root and that did the trick. But still open recovery never installed or load. Luckily androidiani recovery which displayed an error cannot mount but still created the menu and i was able to install custom OS but only cm 7.2.4e and not cm9 nor cm10. I cannot reboot the phone as the phone never starts up. only after clearing dalvik and wiping cache phone boots up. After a certain time now i still cannot install cm7.2.4e as it does not load and gets stuck on custom bootscreen, so i installed MIUI rom which works and starts up but i still can never reboot my phone.
Errors Seen E: cant mount /cache/recovery/command
Kindly help as the phone is just barely working.
Your phone has some serious issues...
How stable it is with stock rom? Maybe You should flash a stock 2.2 and see if you have any issues.
If not, then flash vulnerable recovery and so on, step-by-step.
Maybe it will be easier to locate the source of the problem this way.
Tried Everything
Erovia said:
Your phone has some serious issues...
How stable it is with stock rom? Maybe You should flash a stock 2.2 and see if you have any issues.
If not, then flash vulnerable recovery and so on, step-by-step.
Maybe it will be easier to locate the source of the problem this way.
Click to expand...
Click to collapse
Thank you for your reply. I have tried flashing stock 2.2 and still I cannot reboot the phone without wiping cache and using the reset factory option in stock recovery. Using superoneclick I can root it and install androidiani recovery but I cannot use cm10 or cm 9. after installing cm9 the phone just restarts after cm9 boot screen and after installing cm10 the phone shows the stock android boot screen. cm 7.2.4e installs as well as miui but if battery dies or if I have to restart the phone if it gets sluggish and slow then I cannot...everytime for the phone to boot I have to wipe dalvik and cache for custom roms and for stock roms I have to wipe cache and factory reset.
SO basically I am stuck...have tried changing the sd card, repartitioning the sd card, but nothing worked
Open recovery cannot be used only andoidiani works after popping up some errors.
Kindly help.