Hi,
Iv'e installed Pure Galaxy ROM, and since then phone crashed all the time and 3G never works, and more issues.
Right now I have:
Android V.: 4.0.4
Baseband: I9000XXJVT
kernel: 3.0.8-g4577fdf
Build number: IMM76I
I'm not very into ROMs and kernels, I just need some directions on what's the best kernel for this phone right now. Something simple and that works
Thank you
If ur ready to change roms.. i would recommend SlimICS+ Semaphore 1.3.0, 100% stable, havnt had a single problem after install( a couple of months ago) :beer:
Semaphore the best
Inviato dal mio GT-I9000 con Tapatalk 2
simo.scorpion said:
Semaphore the best
Inviato dal mio GT-I9000 con Tapatalk 2
Click to expand...
Click to collapse
+1
Sent from my GT-I9000 using Tapatalk 2
ok, just installed this to revert back, and now works as originally. To install semaphore, I place Semaphore_2.7.4.tar in the root of the sdcard, rebooted in recovery mode and used install from sdcard / update.zip and it says it can't find nothing...
Can I use odin or ezodin to do it?
nasdriver said:
ok, just installed this to revert back, and now works as originally. To install semaphore, I place Semaphore_2.7.4.tar in the root of the sdcard, rebooted in recovery mode and used install from sdcard / update.zip and it says it can't find nothing...
Can I use odin or ezodin to do it?
Click to expand...
Click to collapse
.tar files are flashed with Odin, it seems you are trying to flash a gingerbread kernel on a ICS ROM, so go here and select the ICS kernel http://forum.xda-developers.com/showthread.php?t=1468795
xsenman said:
.tar files are flashed with Odin, it seems you are trying to flash a gingerbread kernel on a ICS ROM, so go here and select the ICS kernel http://forum.xda-developers.com/showthread.php?t=1468795
Click to expand...
Click to collapse
tried with any of the semaphore .tar, the 1.2.6 and 1.3.0 (s or not) and always the same, once it reboots it stays forever with samsung logo, bbut wont go further.
Now I have:
Firmware V.: 2.2.1
Baseband: I9000XXJVE
kernel: 2.6.32.9
Build number: EZbase v2.00
how do I know if I must use gingerbread or other kernels?
thanks
nasdriver said:
tried with any of the semaphore .tar, the 1.2.6 and 1.3.0 (s or not) and always the same, once it reboots it stays forever with samsung logo, bbut wont go further.
Now I have:
Firmware V.: 2.2.1
Baseband: I9000XXJVE
kernel: 2.6.32.9
Build number: EZbase v2.00
how do I know if I must use gingerbread or other kernels?
thanks
Click to expand...
Click to collapse
It seems you have downgraded to GB 2.2, so just update it to GB 2.3.6 by flashing a JVU + Root from My Android Collections, link below, after which you can upgrade it to CM 9 ( follow directions of chosen ROM) and Finally to CM 10 ( follow directions of chosen ROM)
Remember to save your EFS folder before flashing any custom ROM
Devil kernel has more choices and features.
Sent from my GT-I9000 using xda app-developers app
burakgon said:
Devil kernel has more choices and features.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Thats right, but Semaphore is more battery friendly and faster on mm phone.
Gesendet von meinem GT-I9000 mit Tapatalk 2
Why use non stock kernel?
What is your reason for installing a non stock kernel?
Special features or performance?
Or ...??
Chipsi said:
What is your reason for installing a non stock kernel?
Special features or performance?
Or ...??
Click to expand...
Click to collapse
nice question...
I'm not very into this stuff, don't know what's stock or non-stock either just wanted to install something that works.
Since I've unlocked it, have been playing with ROMs and kernels but all of them have problems, either with the 3G, either with the Wifi
Right now it looks very similar to original samsung with the following:
firmware: 2.3.6 // Baseband: XXJVU // Kernel: 2.6.35.7 // Gingerbread
and everytime I try to connect to any wifi, it seems to be connected, but no access, no nothing (and the wifi router is working fine...)
any opinions out there?
(what's stock kernel, by the way)
Semaphore +1
3lackhawk said:
Semaphore +1
Click to expand...
Click to collapse
+2
sema 2.4.4s
Sent from my GT-I9000 using xda app-developers app
Semaphore is the best.
The devil kernel is best. Really fast on cm10 roms.
Related
Hello, guys i am on blockbuster rom with telon kernel installed! I want to change my rom and kernel to darky rom and darkcore. What would be the method? A very brief method would be appreciated. Thanx
here you go!!
http://www.darkyrom.com/community/i...wm-sgs-cappy-darkyrom-xxjvr-10-3-beta-1.4508/
If i was going back to a darky ROM on my SGS I would flash 10.2RE through Odin and then simply flash 10.2.1 or the JVS base through CWM. Followed by my kernel of choice if i didn't want to stay on darkcore.
I don't think I would bother with the10.3 beta
Sent from my A501 using XDA App
MrIwik said:
If i was going back to a darky ROM on my SGS I would flash 10.2RE through Odin and then simply flash 10.2.1 or the JVS base through CWM. Followed by my kernel of choice if i didn't want to stay on darkcore.
I don't think I would bother with the10.3 beta
Sent from my A501 using XDA App
Click to expand...
Click to collapse
Thanx alot for the simple instructions,exactly what i wanted.
Btw there are so many versions of darkcore kernel,which one should i flash?
Or when i flash the darky rom with the steps you mentioned the darkcore kernel is installed auto?
hassaan123 said:
Thanx alot for the simple instructions,exactly what i wanted.
Btw there are so many versions of darkcore kernel,which one should i flash?
Or when i flash the darky rom with the steps you mentioned the darkcore kernel is installed auto?
Click to expand...
Click to collapse
The correct darkcore kernel will be included on install.
Sent from my A501 using XDA App
I was trying to install the K1-1 Kernel, everything seems fine after I installed it. But once I click on CWM, it saids "This version of CWM Manager should be used with CF-Root V5.0 or newer. It appears that you are running a different kernel. Various features have been disabled.".
How do I install CWM 5.0 ? My Baseband version is N7000XXLA4 Rom is using ROMOW-V5.1
Any help will be great.
benzso63 said:
I was trying to install the K1-1 Kernel, everything seems fine after I installed it. But once I click on CWM, it saids "This version of CWM Manager should be used with CF-Root V5.0 or newer. It appears that you are running a different kernel. Various features have been disabled.".
How do I install CWM 5.0 ? My Baseband version is N7000XXLA4 Rom is using ROMOW-V5.1
Any help will be great.
Click to expand...
Click to collapse
Cwm5 app is fully compatible with chainfires kernel only or any derivativevof. Hardcores is not. However must functions are in cwm itself so no major issues or anything to be worried about
Sent from my GT-N7000 using xda premium
Can you guide me how to put CWM 5 on the my NOTE?
thering1975 said:
Cwm5 app is fully compatible with chainfires kernel only or any derivativevof. Hardcores is not. However must functions are in cwm itself so no major issues or anything to be worried about
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Install chainfires kernel instead.
Download from his thread. Reboot into cwm and flash the file.
Sent from my GT-N7000 using xda premium
Looking at his thread, do I use CF-Root-SGN_XX_OXA_LA4-v5.0-CWM5.zip ?
My current baseband version is N7000XXLA4
I am new using Android phone, just little afraid if I break it
thering1975 said:
Install chainfires kernel instead.
Download from his thread. Reboot into cwm and flash the file.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
If youre running la4 then yes pick the kernel that matches your baseband so rom is la4 kernel required is la4.
Dont worry you wont break anything
Sent from my GT-N7000 using xda premium
Hello Galaxy S Community, I have just purchased a Galaxy S and its coming with android 2.1 stock. I wanna know, whats the fastest and most stable rom for the Galaxy S and whats the fastest and most stable kernel for the Galaxy S?
Edit: I just updated it to 2.3.3 JVN Via Samsung Kies but I am no noob with odin, i just wanted to update via kies .
For stock rom the best kernel is the Sempahore kernel: http://forum.xda-developers.com/showthread.php?t=1112908
Form CM7/MIUI you can you the glitch kernel: http://forum.xda-developers.com/showthread.php?t=1041532
There are most of kernels, but for stock rom the semaphore kernel is better
flowerpower84 said:
For stock rom the best kernel is the Sempahore kernel: http://forum.xda-developers.com/showthread.php?t=1112908
Form CM7/MIUI you can you the glitch kernel: http://forum.xda-developers.com/showthread.php?t=1041532
There are most of kernels, but for stock rom the semaphore kernel is better
Click to expand...
Click to collapse
I definately dont wanna stay on stock touchwiz cause i dont like the interface. What do you think about the 4.0.4 roms? Does all the hardware work or is it in alpha/beta? What about ICS Kernels? Should i flash ICS or flash a Gingerbread rom (CM7, etc)? Sorry about all the questions but there are so many roms/kernels that I just have no clue which one to use.
You could try latest CM9 nightly with Semaphore 1.2.2 or latest mnics or Devil kernel.
After 3 or 4 circle battery charges I'd think it will offer to you good performance and good battery life, but I'm supposing it.
Try them and after that tell us about
I hope it helps you!
I m using ics333 no bugs, good ram management, good battery life my first rom after buying galaxy S
Sent from my GT-I9000 using XDA
For GB, jw6+midnight kernel
Ive download slim ICS (samsung base, device essentials (i9000) and slim gapps). how do i install as it has no odin.tar, just update.zip and im on stock gb so i have no cwm. i tried downloading cwm from here:http://forum.xda-developers.com/showthread.php?t=1089989 but the ezodin link is dead so i have no way of installing. also.
alb3rtt said:
Ive download slim ICS as it seems to include everything i want. how do i install as it has no odin.tar, just update.zip and im on stock gb so i have no cwm. i tried downloading cwm from here:http://forum.xda-developers.com/showthread.php?t=1089989 but the ezodin link is dead so i have no way of installing.
Click to expand...
Click to collapse
Here is my ezodin kit, unzip, read .txt
http://db.tt/MOGZx01S
Sent from my GT-I9000 using xda premium
should i install cm9 first, then slim ics?
alb3rtt said:
should i install cm9 first, then slim ics?
Click to expand...
Click to collapse
Yes.
alb3rtt said:
should i install cm9 first, then slim ics?
Click to expand...
Click to collapse
Full instructions on slim site......see link in my sig
Sent from my GT-I9000 using xda premium
do i have to flash semaphore kernel after slimics or does cm9 (or slimics) come with semaphore kernel in it?
i downloaded you ezbase 4. i extracted it and read the guide. if i do this, will it install cwm for gb? im on stock 2.3.3 (jvn).
alb3rtt said:
do i have to flash semaphore kernel after slimics or does cm9 (or slimics) come with semaphore kernel in it?
i downloaded you ezbase 4. i extracted it and read the guide. if i do this, will it install cwm for gb? im on stock 2.3.3 (jvn).
Click to expand...
Click to collapse
Flash the ROM with.pit, let it reboot then boot back to download, flash the root kernel, let it reboot and you are on rooted ROM, copy nightly, base, essentials and gapps to sd card, then follow instructions for flashing sequence, after, if you want semaphore download and flash that, make sure you use the s version as slim has the large ram patch
Sent from my GT-I9000 using xda premium
slaphead20 said:
Flash the ROM with.pit, let it reboot then boot back to download, flash the root kernel, let it reboot and you are on rooted ROM, copy nightly, base, essentials and gapps to sd card, then follow instructions for flashing sequence, after, if you want semaphore download and flash that, make sure you use the s version as slim has the large ram patch
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
thanks, thats much clearer now sorry for the headache but im a noob in the galaxy s forum
alb3rtt said:
thanks, thats much clearer now sorry for the headache but im a noob in the galaxy s forum
Click to expand...
Click to collapse
No problem, any difficulty, just post back
Sent from my GT-I9000 using xda premium
when i tried to install the latest cm9 nightly in recovery (following the instructions) , i got E:cant open (location of cm9 nightly). should i re download it ?
i dowloaded the one at the top cm-9-20120617-NIGHTLY-galaxysmtd.zip .
alb3rtt said:
when i tried to install the latest cm9 nightly in recovery (following the instructions) , i got E:cant open (location of cm9 nightly). should i re download it ?
i dowloaded the one at the top cm-9-20120617-NIGHTLY-galaxysmtd.zip .
Click to expand...
Click to collapse
Sounds like a bad download, so yes, try again
Sent from my GT-I9000 using xda premium
slaphead20 said:
Sounds like a bad download, so yes, try again
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Did you select instal zip from recovery, or the update zip option?
Sent from my GT-I9000 using xda premium
slaphead20 said:
Did you select instal zip from recovery, or the update zip option?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
i rebooted into recovery, and pressed install zip from sd, then select update.zip.
alb3rtt said:
i rebooted into recovery, and pressed install zip from sd, then select update.zip
Click to expand...
Click to collapse
i redownloaded it and did the install procedure and it came up again. (cant open cm9 update). my cwm is cwm 3, might that be the problem? (i did everything like you ezbase guide said)
Hello,
Right now, my Galaxy Note is running a rooted version Samsung ICS:
Android Version: 4.0.3
Baseband Version: N7000XXLPT
Kernel Version: 3.0.150N7000XXLPY-CL474507
Build Number: IML74K.XXLPY
I'd like to try CM10, but I've been reading a lot of issues from people flashing ROMs from Samsung ICS. What would be the safest way to install CM10? Should I downgrade to a Samsung Gingerbread ROM first? What procedure would you guys recommend?
Thanks,
Tiago
It is important to downgrade first to samsung stock GB.
http://www.youtube.com/watch?v=JO93XJ2C8pc&feature=plcp
Follow his instructions to a tee and you should be good to go.
The youtube video is courtesy of aphroditelikesme(all credits to the dude, as I constantly subscribed to his youtube videos)
Don't forget to hit the 'Thank's button if I have helped you in some way or the other.
Thanks a lot!
But should I flash a stock Samsung GB ROM or a rooted GB ROM? Should I use CWM or Odin to flash GB?
tiagobt said:
Thanks a lot!
But should I flash a stock Samsung GB ROM or a rooted GB ROM? Should I use CWM or Odin to flash GB?
Click to expand...
Click to collapse
you can flash the pre rooted GB rom by Chainfire...then flash the cf kernel....do a full wipe and then just flash CM10. Find the procedure here:
http://forum.xda-developers.com/showthread.php?t=1331784
Go to section 1.3 and u find the way....hope it helps....:good:
Flash it to stock GB
here's the other link for the video.. again all courtesy to the creator of that video. http://www.youtube.com/watch?v=jr3DDEh8vyc
There's also the links of the ROM (choose checkROM GB or RocketROM) and the kernel you need to download.
Just follow his video bud, (I'm following his video for flashing roms and I never miss going back to this video to downgrade to GB)
Cheers!
I see. So flashing Abyss kernel from Samsung ICS (LPY kernel) using CWM is actually safe? I just want to be sure because I've seen many people advising not to use CWM at all if you are on a Samsung ICS ROM.
abysskernel is not an infected kernel, that is why mostly when your going to downgrade to gingerbread.. most flashers will tell you to flash first to abysskernel then flash the GB rom after.
letters_to_cleo said:
abysskernel is not an infected kernel, that is why mostly when your going to downgrade to gingerbread.. most flashers will tell you to flash first to abysskernel then flash the GB rom after.
Click to expand...
Click to collapse
OK, I flashed Abyss kernel (worked fine), rebooted recovery, made a full wipe, flashed Rocket ROM and rebooted the system. I see the boot animation, but after that, nothing happens (blank screen). I've waited over 5 minutes, but the ROM doesn't boot. Anything else I can try?
I'm f*cking tired of explaining this over and over again...MY GOD!! You could've just read the CM9 installation instructions, CHECKED OUT THE STICKIES, ANYTHING LIKE THAT!
THE ONLY 100% SAFE WAY TO GET RID OF AN INFECTED KERNEL IS TO FLASH TO GB THROUGH PC ODIN!! Why the F*CK does everyone prefer to flash abyss and take that risk...!?
IF!! You're confident that RocketRom flashed correctly, you could probably full wipe (AGAIN) from recovery (you'd be on a safe kernel) and that should solve your problem...
Wait for a 2nd opinion though...
eug3n91 said:
I'm f*cking tired of explaining this over and over again...MY GOD!! You could've just read the CM9 installation instructions, CHECKED OUT THE STICKIES, ANYTHING LIKE THAT!
Click to expand...
Click to collapse
Then don't reply, you pud.
Just flash a safe kernel then flash CM10.
Sent from my GT-N7000 using Tapatalk 2
trell959 said:
Just flash a safe kernel then flash CM10.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thanks a lot!
I reflashed Abyss kernel, did a full wipe and installed CM10 right away. It worked just fine! CM10 is working quite well, I'm really impressed!
You guys got me worried for a second. I guess I just had a bad download of Rocket ROM after all.
tiagobt said:
Thanks a lot!
I reflashed Abyss kernel, did a full wipe and installed CM10 right away. It worked just fine! CM10 is working quite well, I'm actually impressed!
You guys got me worried for a second. I guess I just had a bad download of Rocket ROM after all.
Click to expand...
Click to collapse
Glad it worked. Going back to GB is just a myth. If you have a safe kernel to flash from, then use it.
Sent from my GT-N7000 using Tapatalk 2
I know I shouldn't be busting into another's threads but I have a same sort of question.
@tiagobt I hope you don't mind.
Is SpeedMod K3-11 a safe kernel to flash a custom ROM from? I'm running on stock ICS 4.0.3.
Sent from my GT-N7000 using XDA Premium HD app
aurator said:
I know I shouldn't be busting into another's threads but I have a same sort of question.
@tiagobt I hope you don't mind.
Is SpeedMod K3-11 a safe kernel to flash a custom ROM from? I'm running on stock ICS 4.0.3.
Sent from my GT-N7000 using XDA Premium HD app
Click to expand...
Click to collapse
Yes.
Sent from my GT-N7000 using xda app-developers app
i dont know if im intruding too.....
but can we flash a CM9 or CM 10 rom from a speedmod ics kernel on a TW custom ics rom ?
rraaka said:
i dont know if im intruding too.....
but can we flash a CM9 or CM 10 rom from a speedmod ics kernel on a TW custom ics rom ?
Click to expand...
Click to collapse
Yes.
Sent from my GT-N7000 using XDA Premium HD app
post number 744 CM10 thread official preview
wonder which kernel he used ...
Hi Guys... So I have flashed to CM10 on my Note... Running very well.... Does anyone know where I can get the SamsungApps store from?... I've tried various ones from here but cannot seem to get them to work... I've tried the links from below thread but doesn't work... any help would be great.
http://forum.xda-developers.com/showthread.php?t=1632639&page=6
dmonuk said:
Hi Guys... So I have flashed to CM10 on my Note... Running very well.... Does anyone know where I can get the SamsungApps store from?... I've tried various ones from here but cannot seem to get them to work... I've tried the links from below thread but doesn't work... any help would be great.
http://forum.xda-developers.com/showthread.php?t=1632639&page=6
Click to expand...
Click to collapse
All Samsung apps require touchwiz framework and will not run on cm based roms.
Sent from my GT-N7000 using xda premium
So i messed up my phone bad and had to take it for repair.
My flash counter is now at 0 and i'm on 4.0.4 kERNEL VERSION 3.0.15-n7000xxlrk-cl811902 [email protected] #3
build number IMM76D.XXLRK Official roms.
I would like to flash to the paranoid android rom, and would love some help. like should i flash to ginger bread [official or not?] than root than to the paranoid android rom? basically what is the safest way to proceed?
Thanks!
jan-sgs said:
So i messed up my phone bad and had to take it for repair.
My flash counter is now at 0 and i'm on 4.0.4 kERNEL VERSION 3.0.15-n7000xxlrk-cl811902 [email protected] #3
build number IMM76D.XXLRK Official roms.
I would like to flash to the paranoid android rom, and would love some help. like should i flash to ginger bread [official or not?] than root than to the paranoid android rom? basically what is the safest way to proceed?
Thanks!
Click to expand...
Click to collapse
Flash latest Notecore kernel using pc odin, it will root and install cwm recovery as well, once you are on this safe kernel you can flash any custom rom via cwm recovery. No need to flash GB for this.
Note- you have to use triangle away to reset binary count after flashin custom kernel.
You can also follow flashing guide on your selected rom thread after flashin custom kernel.
Sent from my GT-N7000
jeetu1981 said:
Flash latest Notecore kernel using pc odin, it will root and install cwm recovery as well, once you are on this safe kernel you can flash any custom rom via cwm recovery. No need to flash GB for this.
Note- you have to use triangle away to reset binary count after flashin custom kernel.
You can also follow flashing guide on your selected rom thread after flashin custom kernel.
Sent from my GT-N7000
Click to expand...
Click to collapse
very helpful thank you
jan-sgs said:
So i messed up my phone bad and had to take it for repair.
My flash counter is now at 0 and i'm on 4.0.4 kERNEL VERSION 3.0.15-n7000xxlrk-cl811902 [email protected] #3
build number IMM76D.XXLRK Official roms.
I would like to flash to the paranoid android rom, and would love some help. like should i flash to ginger bread [official or not?] than root than to the paranoid android rom? basically what is the safest way to proceed?
Thanks!
Click to expand...
Click to collapse
For a clean install I would recommend you to first downgrade to GB then upgrade to PA. For shortcut use the above method mentioned by jeetu
sahilarora2003 said:
For a clean install I would recommend you to first downgrade to GB then upgrade to PA. For shortcut use the above method mentioned by jeetu
Click to expand...
Click to collapse
after waiting 1 month to have my phone fixed, im not going for the short method. i'll go for the safe method.
Any GB rom will do? and official or not?
jan-sgs said:
after waiting 1 month to have my phone fixed, im not going for the short method. i'll go for the safe method.
Any GB rom will do? and official or not?
Click to expand...
Click to collapse
You can flash stock gb for your region or the pre rooted one, from dr.ketan's thread. Both will work fine.
Sent from my GT-N7000
on PA 1.4 successfully from prerooted GB of Dr Ketan.
do you guys you a different kernel with this?
jan-sgs said:
on PA 1.4 successfully from prerooted GB of Dr Ketan.
do you guys you a different kernel with this?
Click to expand...
Click to collapse
Great! I think you should first try/test built in kernel only.
Sent from my GT-N7000
jan-sgs said:
on PA 1.4 successfully from prerooted GB of Dr Ketan.
do you guys you a different kernel with this?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1789397 ..
Sent from my GT-N7000 using Xparent ICS Tapatalk 2
sahilarora2003 said:
For a clean install I would recommend you to first downgrade to GB then upgrade to PA. For shortcut use the above method mentioned by jeetu
Click to expand...
Click to collapse
There is no difference if you go back to GB or do it from notecore or any safe kernel.
The objective is to perform a Safe Wipe.
Sent from my GT-N7000 using xda app-developers app
praetorius said:
There is no difference if you go back to GB or do it from notecore or any safe kernel.
The objective is to perform a Safe Wipe.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Whenever you change the base like cm9 to ics then it is recommended to flash gb to be safe. But you can use shortcuts too like abyss or direct wipe and flash from cwm. The first way gives you full performance with extra juice. No fcs and sods.
Sent from my GT-N7000 using Xparent ICS Tapatalk 2
thanks guys. I am getting some FC but nothing to impeding, im sure it will be fixed with the next realeases