Galaxy Note bricked after JB flash - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hey everyone
I'm a bit lost as to how to get started with fixing my hard bricked phone. It occured when flashing a leaked JB rom and now won't turn on, not even in Download mode.
I'm in Australia but bought my phone in Malaysia so the local Samsung shop is refusing to repair it without replacing the main PCB. They advised that a repair would be possible without the hardware replacement, but it would be illegal for them to perform because of issues relating to the IMEI (WTF?).
I haven't been able to get any response out of the phone. The battery was very low when I flashed (terrible move, I know), is it possible that the battery now isn't charging and this is why I'm not able to go into Download mode? I have a few mates with the same phone so I could potentially try a charged battery in it...
All up - I'm guessing that I have to manually write to the EMMC.... Is this just a matter of obtaining a JIG cable and using Odin? I'd like to avoid opening the phone up, but I can do if it's my only option.
Cheers in advance
Paul

zeski said:
Hey everyone
I'm a bit lost as to how to get started with fixing my hard bricked phone. It occured when flashing a leaked JB rom and now won't turn on, not even in Download mode.
I'm in Australia but bought my phone in Malaysia so the local Samsung shop is refusing to repair it without replacing the main PCB. They advised that a repair would be possible without the hardware replacement, but it would be illegal for them to perform because of issues relating to the IMEI (WTF?).
I haven't been able to get any response out of the phone. The battery was very low when I flashed (terrible move, I know), is it possible that the battery now isn't charging and this is why I'm not able to go into Download mode? I have a few mates with the same phone so I could potentially try a charged battery in it...
All up - I'm guessing that I have to manually write to the EMMC.... Is this just a matter of obtaining a JIG cable and using Odin? I'd like to avoid opening the phone up, but I can do if it's my only option.
Cheers in advance
Paul
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/showthread.php?t=1667886

zeski said:
Hey everyone
I'm a bit lost as to how to get started with fixing my hard bricked phone. It occured when flashing a leaked JB rom and now won't turn on, not even in Download mode.
I'm in Australia but bought my phone in Malaysia so the local Samsung shop is refusing to repair it without replacing the main PCB. They advised that a repair would be possible without the hardware replacement, but it would be illegal for them to perform because of issues relating to the IMEI (WTF?).
I haven't been able to get any response out of the phone. The battery was very low when I flashed (terrible move, I know), is it possible that the battery now isn't charging and this is why I'm not able to go into Download mode? I have a few mates with the same phone so I could potentially try a charged battery in it...
All up - I'm guessing that I have to manually write to the EMMC.... Is this just a matter of obtaining a JIG cable and using Odin? I'd like to avoid opening the phone up, but I can do if it's my only option.
Cheers in advance
Paul
Click to expand...
Click to collapse
Thought you may need this..
http://forum.xda-developers.com/showthread.php?p=25869754
Sent from my SPH-D710 using xda premium
I'm assuming you only get an LED? ,If you are suffering Erase Cap there is very little that can be done at the stage you're at.
All information regarding Ecap can be found in that thread.
You may say hello in there and get somebody far wiser than me to pick it up..

Thanks for the suggestions guys.
Unfortunately the phone is completely unresponsive (although it does warm up when plugged in!)
I'm guessing it's the EMMC bug rearing it's ugliest form and it now needs me to bit a JIT kit to rewrite to it directly... but it'll take me weeks to learn up on that and get the parts...
I'm guessing I need one of these bad boys to proceed:
http://www.ebay.com.au/itm/RIFF-Box...ltDomain_0&hash=item25755f5616#ht_15039wt_909
Can anyone confirm/deny/comment? I'm gonna go out and grab myself an Ideos X5 to hold me over, but would love to go back to my Galaxy Note.

Leaked JB rom from where did you get that

Actually there is no leaked jb rom
Try using jig to enter download mode

Before flashing what ROM and Kernel are you on?

zeski said:
Thanks for the suggestions guys.
Unfortunately the phone is completely unresponsive (although it does warm up when plugged in!)
I'm guessing it's the EMMC bug rearing it's ugliest form and it now needs me to bit a JIT kit to rewrite to it directly... but it'll take me weeks to learn up on that and get the parts...
I'm guessing I need one of these bad boys to proceed:
http://www.ebay.com.au/itm/RIFF-Box...ltDomain_0&hash=item25755f5616#ht_15039wt_909
Can anyone confirm/deny/comment? I'm gonna go out and grab myself an Ideos X5 to hold me over, but would love to go back to my Galaxy Note.
Click to expand...
Click to collapse
Sorry to learn about your mishap. I suggest you should not waste money on RIFFBOX as there is little chance you will be able to revive your device in the condition it is, and if you are not into electronics, and don't have hands on experience of soldering (i mean really thin wires), this will be useless for you. I am telling this from my experience as I have same bricked note with me. Had it jtagged, but could not get it revived because the bootloader in eMMC is damaged, so the only option is to replace eMMC, which is physically impossible without sophisticated high tech machinery, or to replace the motherboard carrying eMMC chip. That is not available anywhere (not even on eBay last I checked), except Samsung Service Center, and at least in my country, they are charging like USD400 for the motherboard. I read in another thread here (cannot find it now) that it cost another guy about US$200 for the same thing else where (I think it was in India).
How much are they charging for motherboard replacement? I think you should go for this option as even if somehow you get your note revived without mb replacement, it is highly likely you'll still end up with partially damaged eMMC chip.

how did you know that it s the emmc brick?, i have my phone hardbricked before when i tried to use swap partition, and i get no responce from the phone also, i though it was the emmc brick bug, but i get it worked only with jtag, and costed me around 20$ only, and it wasn't the emmc brick, it was hardbrick but without emmc chip corruption.
the only way the emmc brick ocures is by:
wiping or formatting while on unsafe kernel
any thing else isn't emmc brick, and i think this your condition, you have to try jtag dear.

Thanks for the responses guys It's much appreciated.
I've ordered myself a little USB JIG, will see how that goes and proceed from there!

Emmc big is still present in the note 2 with jelly bean?
Sent from my GT-N7100 using xda app-developers app

u should ask this in the Note || forum mate.. there u will get more response... although.. the emmc was specific to ICS kernels..

nokiamodeln91 said:
u should ask this in the Note || forum mate.. there u will get more response... although.. the emmc was specific to ICS kernels..
Click to expand...
Click to collapse
Right, ICS kernels that are being modified to use on JB for phones that dont have jb kernel source... Like a samaung phone
Warning: hideous sig acomin..
Need a change of pace?
Odexing Data with a simple script
or
Change your boot splash-screen in two steps

Ya thats cuz there is no official uodate for note yet

Related

DEAD Galaxy Tab. Samsung Center said the Motherboard problem.

Hi all. My TAB is dead already. it's dead just normally not because of flashing or rooting process etc. The battery drain to below 10% before i go to sleep and left it without charging it. I don't think its the cause it's dead.
Btw, when i wake up tomorrow morning, i found it dead then, i connect it with the charger but nothing happen. no lights, no display, nothing show up.
After trying all the combination of keys that i found on google to wake it up, it still not helping.
For info, my Tab is already being rooted and flashed with Overcome 2.0.1 ROM from the first day i bought it a months ago. Its act like a normal before its really dead.
So, I send it to the Samsung Center (Malaysia). After a week, i got a call from them and they said my Tab Motherboard is fault/burn because of 3rd party software that i install on it. I think they mean the rooting & unlocking the Tab. So that, my warranty is VOID! and i need to pay around RM700 (USD 230.49) to change the motherboard if i want.
what you think guys? Does rooting/flashing a Rom will effect the hardware or its just their excuse?
..// sorry for my bad english btw.
i think by this money you better buy new tab .. how come you unlock your tab ? i thought all the tabs in malaysia are Unlocked .
did you try to keep it in charge for at least 4 hours and\or , in USB plug it to your computer and keep it plugging and see , ( this method may and may not work ) ..
but serious 700rm they are taik
k0sh said:
i think by this money you better buy new tab .. how come you unlock your tab ? i thought all the tabs in malaysia are Unlocked .
did you try to keep it in charge for at least 4 hours and\or , in USB plug it to your computer and keep it plugging and see , ( this method may and may not work ) ..
but serious 700rm they are taik
Click to expand...
Click to collapse
trying all the method. i found this thread.
http://forum.xda-developers.com/showthread.php?t=1133590
yes, im thinking of get the new one but i just bought a new TF101. huhu.
im thinking to give this Tab to my wife..
they are taik?
alisabki said:
trying all the method. i found this thread.
http://forum.xda-developers.com/showthread.php?t=1133590
yes, im thinking of get the new one but i just bought a new TF101. huhu.
im thinking to give this Tab to my wife..
they are taik?
Click to expand...
Click to collapse
hihihi this is my thread ..
how you wanna give to your wife and your tab is dead ? if i'm in your place . i'll fight with them .. but however , you should fix it ..
yeah Taik , some of the words that my malayu friend teach me
A third party software making the tab's motherboard to get busted?! Honestly, can you believe that? If i were you, im going to fight it out with samsung!
Sent from heaven to earth to make your earth a heaven
You had overcome on it. Overcome allows for overclocking. Overclocking (even if you didn't do it) equals a voided warranty. it's made clear in every post that flashing the device voids a warranty. If you choose to fight, you won't win. This is why there are posts to restock the tab for sending back...
Swyped from my "better than an iPad" tab running Overcome Hermes.
k0sh said:
hihihi this is my thread ..
how you wanna give to your wife and your tab is dead ? if i'm in your place . i'll fight with them .. but however , you should fix it ..
yeah Taik , some of the words that my malayu friend teach me
Click to expand...
Click to collapse
oooppss. its your thread..
my wife already know the Tab is dead. now she blabbering bla bla bla
..........//
btw, k0sh, do you think i can send the Tab to them as you prefer on your thread for Hard Brick? it cost about $50 + shipping cost. Maybe its around $70-$100... but i still confuse, it's really my tab motherboard is really burn or they just TAIK?
btyork said:
You had overcome on it. Overcome allows for overclocking. Overclocking (even if you didn't do it) equals a voided warranty. it's made clear in every post that flashing the device voids a warranty. If you choose to fight, you won't win. This is why there are posts to restock the tab for sending back...
Swyped from my "better than an iPad" tab running Overcome Hermes.
Click to expand...
Click to collapse
ya i know it. they will win. even i dont OC & even its brick because of their hardware faulted. but from what i see, they are likely to transfer the cost of repair to me because i'm rooting it. oh my~
vince_junior said:
A third party software making the tab's motherboard to get busted?! Honestly, can you believe that? If i were you, im going to fight it out with samsung!
Sent from heaven to earth to make your earth a heaven
Click to expand...
Click to collapse
maybe its just their excused? i will try to fight them tomorrow when the tab is arrived.. trying my luck!
vince_junior said:
A third party software making the tab's motherboard to get busted?! Honestly, can you believe that? If i were you, im going to fight it out with samsung!
Sent from heaven to earth to make your earth a heaven
Click to expand...
Click to collapse
Yes Overclocking can destroy electronic components because of overheating. That is the main reason for me to remove overcome as my tab was abnormally warm compared to stock gb when I had gold flashed to it. I did not even touch any of the oc setting.....and may I add that I am in the Middle East where heat is an issue...
bongski55 said:
Yes Overclocking can destroy electronic components because of overheating. That is the main reason for me to remove overcome as my tab was abnormally warm compared to stock gb when I had gold flashed to it. I did not even touch any of the oc setting.....and may I add that I am in the Middle East where heat is an issue...
Click to expand...
Click to collapse
so, u are not using overcome?
alisabki said:
so, u are not using overcome?
Click to expand...
Click to collapse
As my sig says it....no longer as I have no use for it.
And even the Pitbull, one of the brains behind Overcome had posted about UNDERCLOCKING here and here.....it isn't just me....
alisabki said:
Hi all. My TAB is dead already. Dead normally not because of flashing or rooting etc. The battery drain to below 10% before i go to sleep. I just left it without charging it. I dont think its the cause.
btw, when i wake up tomorrow morning, i found it dead then trying to charge it but never happen. no lights, no display, nothing show up.
after trying all the combination of keys that i found on google to wake it up, nothing happen.
My Tab is rooted and with Overcome 2.0.1. I already rooted it and using this ROM on the first day i buy it a months ago. Its act like a normal before its really dead.
so, i send it to Samsung Center. After a week, i got a call from them and they said my Tab Motherboard is fault because of 3rd party software that i install on it. I think they mean rooting & unlocking the Tab. So, my warranty is VOID! and i need to pay around RM700 (USD 230.49) to change the motherboard.
what you think guys? if rooting will effect the hardware or its just their excuse?
..// sorry for my bad english btw.
Click to expand...
Click to collapse
kinda similar with mine....now my gtab still on samsung centre. this morning tried to check it out and it was told that i will receive new korean battery & new machined
the customer service told that before i upgrade to gingerbread (also in samsung centre) my gtab is being rooted??
the question (in my case), is it possible to detect that my gtab was rooted since they (samsung centre) already upgrade it?
well alisabki, its kinda hard in your position....have you tried to look after the mother board on ebay/amazon perhaps? to get the alternatives price?
last night i just read (forgot the sources) that cost to build gtab is only $241 (part+labor)
come to think of it, i guess frequent flashing and trying new kernels may cause wear and tear to the tab. refers to my response here : http://forum.xda-developers.com/showthread.php?p=14765324#post14765324
The service centre person told me they replaced the motherboard and the battery. I am staying stock for now.
Well folks,
Just pick up my gtab and it os i got new korean battery and new machine dunno what they mean with machine here i guess same with u, motherboard with free warranty power.
They said,"my gyab was being rooted" but they already upgrading to gingerbread so they helped me with free warranty.
Imho, my case happened because i had install couple application that required root such as adfree,quikreboot,etc and perhaps the officially gingerbread doesn't comfortable enough which is i haven't rooted
Fel good to be back with this magnificent 7
genuine asia gingerbread
I'm having a hard time believing that it's actually toast. If you'd like me to take a look at it, just PM me as I'm very familiar with fixing bricked TAB's in any condition.
I hard believe that they can recognize that you rooted your phone or whatever since they said to you that your motherboard is gone.........so, unfortunately it is also happened to me today, it's not the first one that i flash my tab but today i've hard bricked it, sent back to Vodafone, told me to wait 1 month (#[][]###[##!!)
Dammit, never brick a phone, well used to HTC never bought a Samsung and in all honesty i was thinking to change my beloved HD2 for a Galaxy S 2 but i've found very risky to flash those Samsung phones so changed idea and waiting for new HTC devices with bootloader not locked.
Will let you know for news from Vodafone but if they will say me that brick was because i've rooted it then i want proves of that, if they can see that then they can resurrect the phone without change motherboard...am i right?
Well, i love Overcome Rom. Its getting better and better. Yap. Like Pitbull, im also the battery-wh*re.. i dont care so much about its performance. Im not doing heavy stuff/work on it. i got my nexus one btw to trying or playing overclocking etc... im just using my tab to surfing, file transfering/dropbox, movies, and even games sometime which i think it's 1ghz power is still doing its job.
What is my really problem is they (samsung center) say my warranty is void because of 3rd party software that i install on it. i think its just their excuse. the overcome rom that i use is already a month old. nothing wrong with the 3rd party software that i've install.
Declan79, its possible to detect if we root it or not. in my case, they just change the motherboard and they will turn it on just like normal. for example, my pc dead because of the motherboard. i change it to the same model and walla.. its fixed! its the same concept..
the cost to change the motherboard is cost me around USD263.27 which is more expensive + no warranty. so what? everything is expensive in my country.
you're so lucky Declan. even you void the warranty by rooting it, u still got it repaired for free..
connexion2005 said:
I'm having a hard time believing that it's actually toast. If you'd like me to take a look at it, just PM me as I'm very familiar with fixing bricked TAB's in any condition.
Click to expand...
Click to collapse
yes, you know what, im the person who asking on your facebook page about my Tab. Im the Malaysian guys..
btw, im still find a local JTAG service that will reduce the cost first...
and i don't know if it is true my tab motherboard is 'really' burn or what...
af974 said:
I hard believe that they can recognize that you rooted your phone or whatever since they said to you that your motherboard is gone.........so, unfortunately it is also happened to me today, it's not the first one that i flash my tab but today i've hard bricked it, sent back to Vodafone, told me to wait 1 month (#[][]###[##!!)
Dammit, never brick a phone, well used to HTC never bought a Samsung and in all honesty i was thinking to change my beloved HD2 for a Galaxy S 2 but i've found very risky to flash those Samsung phones so changed idea and waiting for new HTC devices with bootloader not locked.
Will let you know for news from Vodafone but if they will say me that brick was because i've rooted it then i want proves of that, if they can see that then they can resurrect the phone without change motherboard...am i right?
Click to expand...
Click to collapse
u bricked it on the Odin process?
and, i'm waiting the news badly!. hopefully, u got to use the warranty as i will fight the samsung guy hardly!
never bought the samsung phones ever... it very risky..

[Q] Hard bricked my tablet and some questions

Hi all. First of all, I come here because I hard bricked my tablet (I did some research on some brick terminology.) I have some questions at the end of this thread, to satisfy my curiosity.
I misunderstood instructions and bricked my tablet. I barely had it two months. The instructions I spoke of where to install CM7 beta on my tablet (instructions here).
I downloaded and installed the files, then used heidmall to flash it. After the flash, heidmall said it was sucsessful. The problem was that it was hard bricked. No response to any button I pressed. I went on the Cyanogenmod forums and asked some questions. One of the users asked what the carrier was.. Verizon Wireless, I answered him. He said it wont boot up because I flashed a rom with a different radio or something (I dont remember all the details).
One of my questions is that, yes I did root my devices prior bricking it (voiding it.) If I send it to Samsung to get it repaired, will they be able to tell that I did root it? I did not install any roms on it (yet) or tried to overclock it; only thing I really did to use the root access was to use the wireless tether (just once). I know over clocking can make the device over heat and that leaves evidence on the motherboard, from what I read, thirdparty software. I have seen some videos about fixing bricked tablets using a program called JTAG to fix the boot-loaders. If Samsung are able to fix it, will they be able to see that it is rooted or was?
My primary question is that, can Samsung fix my device when I send it in, regarding the radio. Or will they fix it because it is rooted, or if they can't tell if it is.
I ask the evidence of the rooted device because last year, my Motorola Droid got overheated and I had to send it in to get it replaced. That device was rooted and had CM6 installed on it. I sbf'd it back to original stock and Verizon didn't contact me, so I am assuming they can't tell that it was rooted.
Another question. If Samsung does decide to repair my tablet, how much would that cost? And if they do find out it is rooted and they ask me if I wanted it fixed, how much would that cost? Estimated prices would be appreciated as well.
Another question. I have been browsing around and I found some supposedly reliable people who can fix my tablet. MobileTechVideos to be specific. I am not questioning their authenticity anything. I am wandering if I should send my tablet to them to fix it instead of Samsung. Because I am wondering if Samsung would charge me up the whoohoo to get it repaired.
I know my questions are many and seemed jumbled together. But I am curious.
answers
1- as i'm sure you were on froyo - did you patch the bootloader patch ? if not , then this is what caused the hard bricked
2- samsung will not know if you were rooted your tab , actually they will know because most of people go there with this specific issue because they flashed roms\kernels Unofficial
3- if you still under warranty they will fix it for you (for free) without any cost , all you need is a drama ( i updated via kies and then my tab off and never wont boot again ) it works 100%
4- as i heard MobileTechVideo are trusted people and they fixed alot of tabs
if you still under warranty send it to Samsung with the drama i just mentioned above and they will fix it in( a month or 3 weeks) for free
please from now on , do read guides carefully we all humans and we may miss something or do some mistakes , batter to be careful more than to be sorry
good luck
http://forum.xda-developers.com/showthread.php?t=1127978
Yeah, I heard Mobile Tech do great job with only $50 dolar payment. You should let them fixed it for you..or
I'm not 100% sure, but there is 10 or 20% sammy can detect it is rooted. BUT if you already decide to send to sammy, better you make sure your tab is totally hard brick so that sammy could't detect it rooted at all. Ex:- put your tab inside microwave. I heard some person on HD2 forum do this and they manage to get brand new replacement of HD2. ;P..Just my suggestion.
haha..BUT read on this xda forum first. Do search until you are satistify your tab is screw up and totally hard brick and could not solve by you before you take my consideration..
You voided your warranty if you rooted it. Samsung will charge you to repair it because they will know. They will charge more than mobile tech, I promise. 130 from samsung is about right, 50 from tech.
You flashed a GSM rom into a CDMA device, so if you do get it repaired I recommend a lot of reading before you try again.
Sent from my "better than an iPad" tab... Running Overcome Gingerbread.
Just say it stop working , they won't know it's rooted i did the same thing and got mine replaced for free you got a year warranty.
Sent from my HTC Sensation 4G using XDA Premium App
To reply to all above questions.
1. My tablet is completely hard bricked. No response to any hard reset or download mode. The screen bares no response to anything. I can feel some heat from the battery inside, just saying.
2. Microwaving my tablet seems a bit crazy. I might blow up my microwave and I have a feeling that would damage it to where Samsung will not replace it.
3. "You flashed a GSM rom into a CDMA device, so if you do get it repaired I recommend a lot of reading before you try again." Yes I know. I always thought that I could flash it back to fix it. But I can't even get to download mode.
It seems that I got some response that 'No Samsung will not find out its rooted', or 'Yes, they will find out I rooted it and will charge me." I will send it in to Samsung to get it repaired and tell the outcome here.
Hi ripjaw27!
any update on what Samsung said ?
I need to call them tomorrow!
Ofiaich
The Mobile Tech Video guys are very good. They resurrected by captivate when flashed the wrong bootloaders on it. Very fast turn around time and no BS whatsoever. I highly recommend them if you need JTAG services for any device. In the extremely rare event that he cant fix it he'll send the device back no charge - all you're out is shipping.
CDMA and GSM roms can't be used on the opposing devices... The wifi only version, gt - p1010, also shouldn't be flashed. You WILL end up with a brick, guaranteed... Fair enough you want to try these thingsa BUT theres a reason each rom is identified as GSM or CDMA....
They received my tablet, its been a week. But I haven't received any news from them. The ticket page they sent me still doesn't have a estimated repair date. So no updates as of yet.
I'd take down the repair invoice for a device you've admitted to bricking, friend. Just sayin...
Okay got an update from Samsung.
"*08/04/2011//11:49:50//0001773863//Telephone//ASC*
8/4/2011 10:41 AM-Edmond: The unit is repaired. SOLUTION: Replaced PBA"
It got repaired! Haha thanks. What is a PBA?
Okay got an update from Samsung.
"*08/04/2011//11:49:50//0001773863//Telephone//ASC*
8/4/2011 10:41 AM-Edmond: The unit is repaired. SOLUTION: Replaced PBA"
It got repaired! Haha thanks. What is a PBA?
jocala said:
I'd take down the repair invoice for a device you've admitted to bricking, friend. Just sayin...
Click to expand...
Click to collapse
Yeah thanks friend!
Just remembered what happened in a movie I saw.
Just for the records: Got my Hardbricked GTab repaired via T-Mo UK under warranty. Apparently they cannot check whether this has been flashed or not...
I think I might have to send my tablet back again. This time my 3G is not working after a few flashes and flashed a zimage to the modem and I bricked the modem now.... I have to find a stock firmware before I send it back. I am sad.
Ripjaw check your settings in > settings > wireless network > mobile network > names and connections and add your carrier UMTS - 3G \APN settings.
I did had the same when i flashed my GT-P1000, it is empty no default carrier settings build in..
OK mate, the 1st they'll repair under good graces but if you go back with the same or a similar problem, chances are they're going to look closer for the problem this time...

Finally, i got hard bricked...

Hello. Sorry for my english.
I've been living on the edge, like many of us LOL, and i finally got hard bricked. No battery charge, logo, download mode. Nothing. Just a black screen.
I was using ICS stunner 1.4.26 and decided to flash Catastrophic Meltdown 9 (CM9 for friends). The problems was that my battery died when it was installing the kernel, or the boot, i dont know.
So, i have been reading a lot those days but nothing seems to work. I have ordered a Jig but i think is not going to work. Yesterday i used windows, and something was detected when i plugged in the usb, but Odin not.Today it does not work, and windows doesnt play any sound. Any idea? A Jag?
I should say this is the best mobile phone i have ever touched. I would be eternal grateful with all of you if we could fix this mess. I was aware that there were risks. Im aware now maybe i cant fixit and im not gonna blame anyone because it was my responsability, but any help would be appreciated. Thanks.
Same thing happened to me, nothing worked (tried the JIG). I had to send it in for repair, but they didn't see that it was my fault (still had warranty).
nasdak10 said:
Hello. Sorry for my english.
I've been living on the edge, like many of us LOL, and i finally got hard bricked. No battery charge, logo, download mode. Nothing. Just a black screen.
I was using ICS stunner 1.4.26 and decided to flash Catastrophic Meltdown 9 (CM9 for friends). The problems was that my battery died when it was installing the kernel, or the boot, i dont know.
So, i have been reading a lot those days but nothing seems to work. I have ordered a Jig but i think is not going to work. Yesterday i used windows, and something was detected when i plugged in the usb, but Odin not.Today it does not work, and windows doesnt play any sound. Any idea? A Jag?
I should say this is the best mobile phone i have ever touched. I would be eternal grateful with all of you if we could fix this mess. I was aware that there were risks. Im aware now maybe i cant fixit and im not gonna blame anyone because it was my responsability, but any help would be appreciated. Thanks.
Click to expand...
Click to collapse
From my experience the only way u can get ur phone back in service is go to ssc and make some reasonable reason why ur phone is dead, so u can still claim for warranty and I am sure they will replace ur engine/mobo like my friends did a month ago.
Sent from my GT-N7000 using xda premium
nasdak10 said:
Hello. Sorry for my english.
I've been living on the edge, like many of us LOL, and i finally got hard bricked. No battery charge, logo, download mode. Nothing. Just a black screen.
I was using ICS stunner 1.4.26 and decided to flash Catastrophic Meltdown 9 (CM9 for friends). The problems was that my battery died when it was installing the kernel, or the boot, i dont know.
So, i have been reading a lot those days but nothing seems to work. I have ordered a Jig but i think is not going to work. Yesterday i used windows, and something was detected when i plugged in the usb, but Odin not.Today it does not work, and windows doesnt play any sound. Any idea? A Jag?
I should say this is the best mobile phone i have ever touched. I would be eternal grateful with all of you if we could fix this mess. I was aware that there were risks. Im aware now maybe i cant fixit and im not gonna blame anyone because it was my responsability, but any help would be appreciated. Thanks.
Click to expand...
Click to collapse
No download mode when you use the jig?
I feel your pain. Best wishes on resurecting that thing.
sorry to know. hope things will be Ok soon for you.
nasdak10 said:
I was using ICS stunner 1.4.26 and decided to flash Catastrophic Meltdown 9 (CM9 for friends). The problems was that my battery died when it was installing the kernel, or the boot, i dont know.
Click to expand...
Click to collapse
It has nothing to do with your battery dying and everything with trying to flash CM9 directly from super-dangerous LP5 or LP6 leak ICS kernel.
No jig or JTag will revive your phone now.
However, if your Note refuses to go into download or recovery mode, you are in luck - if you have a warranty, that is. Just take your phone to the service center and tell them that it died when updating via Kies. There is no way for them to tell what had really happened and they will have to replace your motherboard free of charge.
Sadly, jig didnt solve the problem. Battery isnt hot when plugged in, is my motherboard fried by flashing the note?
Could a jtag solve the problem?
Try to take it back in for warranty before attempting a JTAG and voiding the warranty (that they can tell)
Sent from my Nexus 7 using xda app-developers app
nasdak10 said:
Sadly, jig didnt solve the problem. Battery isnt hot when plugged in, is my motherboard fried by flashing the note?
Could a jtag solve the problem?
Click to expand...
Click to collapse
Yeah, that's a classic superbrick, need replacement mobo. Sorry dude. As mentioned just say you were updating ics ota or through kies.
Sent from my GT-N7000 using xda premium
I got the same problem few days back..I went to service center and said that i got an ota update and after downloading had completed,it started rebooting and there i got some errors and finally my phone is dead
They were unable to find the exact reason why it got bricked as it was unable to enter download or recovery mode
So they replaced the motherboard under warrenty
Better this it once
All the best :good:
I dont think that warranty thing is gonna work, because i have lost some inside cover screws... yeah, thats a long story trying to fix it. If i borrow a motherboard... could i recover my data? because thats all i want at the moment. Or, is there any website where i can buy it? Otherwise, im going to try it with the warranty...
nasdak10 said:
I dont think that warranty thing is gonna work, because i have lost some inside cover screws... yeah, thats a long story trying to fix it. If i borrow a motherboard... could i recover my data? because thats all i want at the moment. Or, is there any website where i can buy it? Otherwise, im going to try it with the warranty...
Click to expand...
Click to collapse
What cover screws??
If you change your motherboard,you will lose all your data
I just came back from the service center and they are covering it under warranty . Similar symptoms and they are going to replace the whole board. Just take it to the service center and say "Yo man your **** died on it own" :fingers-crossed:
Mr Colt said:
I just came back from the service center and they are covering it under warranty . Similar symptoms and they are going to replace the whole board. Just take it to the service center and say "Yo man your **** died on it own" :fingers-crossed:
Click to expand...
Click to collapse
Ivjust tried it bit couldnt get brick to occur no matter how hard i tried. Nm glad you got yours fixed
Sent from my GT-N7000 using xda app-developers app
Mr Colt said:
I just came back from the service center and they are covering it under warranty . Similar symptoms and they are going to replace the whole board. Just take it to the service center and say "Yo man your **** died on it own" :fingers-crossed:
Click to expand...
Click to collapse
Good to hear
Sent from my GT-N7000 using Tapatalk 2

[Q] Is my note hard bricked now?

This is going to be a long story.
Had my note with me for about 3 years now.. Was waiting for the warranty to expire before I rooted it but I just never got to it.. So I was on Stock ROM and kernel all this time.
So last Friday (3 days back) was its doomsday.. had just replied to a text message, locked the phone and that was the last time I saw it working :crying:
It had switched off and when I tried to switch it back on it was stuck in bootloop, on the 'samsung galaxy note n7000' screen to be precise.. did some googling, came to xda forums, got that I need to get me recovery.. Vol Up + Home + Power.. nothing.. it just restarted and bought me to the boot note n7000 screen.. searched this now on xda,. got that I need to check if I have the download mode.. Vol Down + Home + Power and voila its alive, I had the download option.
Now from various threads I got that the next step would be install a kernel with recovery option it and I felt most recommended were Phil'z kernels.. So that is what I did. I downloaded Odin v3.09 and (not able to post URLs since a new user) Philz kernel (PhilZ-cwm6-XXLT9-ORA-5.11.2.tar) but it always got stuck at zimage.. tried 3 diff cables and 4 diff usb ports.. turned out the culprit was Odin version.. downloaded v 1.30 and it worked.. I was able to flash it to Philz kernel with a pass in Odin.. Tried to see if I could get the recovery option now but nada.. still stuck at the boot logo screen. Tried other Philz kernels for n7000 to see if they would do the trick.. I tried (philz_touch_6.07.9-n7000.tar.md5) and (philz_touch_6.12.8-n7000.tar.md5) but both got stuck at zimage so I left it at the cwm6 one.
Now read other threads and I got that the way to go back to stock kernel and flash the stock rom as well.. so downloaded the stock indian JB Rom (N7000DDLSC_N7000ODDLSC_N7000DDLS6_HOME.tar.md5) from sammobile's firmware and this stock kernel (DDLRI N7000), can't figure out which thread I downloaded this from though. So I flashed the kernel first and it was a pass and the odin mode screen showed, custom bin count as 1 and current binary as samsung official. Next I tried to flash the stock rom but Odin got stuck at 'factoryfs.img'. Then dunno why I thought that stock kernel is bad and decided to go to back to Philz kernel.. the one that I was able to flash successfully. I did it via Odin and it was a pass, the phone restarted and it hasn't switched on since. I mean I don't have even the download mode now.
So in short, no recovery mode, no download mode, and no boot loop screen as well.. I have tried to see if its in deep freeze or not, I mean whether the screen is not displaying anything and still be able to go to download mode to see if ODIN is able to detect it but it ain't working. Also if I try to charge it, nothings displayed on the screen but it does get warm
Do I have any hope in reviving it on my own? I have tried to contact fellow xda mates here in gurgaon to see if they can lend me their usb jig yet to see their response.. Is it worth it to spend money to get one of my own? Any idea what the fault might me and if all's lost how much would samsung charge me on fixing it.
Samsung would definitely charge too much, but i dont see anything wrong that you might have done to end up in this situation. I would suggest you to use a fully charged battery first to see if you can access download or recovery mode and if you dont have spare battery try to use external charger to charge only battery outside of phone, insert in phone and try the download mode or the recovery mode. USB jig shouldn't be too expensive if you want to try that after charging the battery and you can also make USB jig yourself if you understand those things.
Cheers!!!
Well I am trying to figure out where to buy the resistors to buy from.. Dad has a soldering kit so should be able to use that.. Yes I am afraid Samsung will charge me a bomb for this.. and on top of it I had bought a new battery just a day before.. Now I don't have an external charger to charge the battery separately.. Doesn't the device heating up mean that its charging?
myeviltwin said:
Well I am trying to figure out where to buy the resistors to buy from.. Dad has a soldering kit so should be able to use that.. Yes I am afraid Samsung will charge me a bomb for this.. and on top of it I had bought a new battery just a day before.. Now I don't have an external charger to charge the battery separately.. Doesn't the device heating up mean that its charging?
Click to expand...
Click to collapse
It may mean that its charging as there is no way to check, purchase these, very inexpensive:
http://imshopping.rediff.com/imgsho...battery-charger-4-blackberry-nokia-htc-lg.JPG
Not advertising, not promoting just showing the picture. You would get it from any local shop.
Okay, will get one.. So you think there's still hope for my poor phone
Can't figure out why its lost its download screen.
Had gone on a work related trip hence the gap.. Got an external charger but didn't help.. same result..
Too much of a hassle to get the resistors where i live.. Have ordered one for myself now.. and that I believe is going to be my last hope or else I am going to have a very expensive paperweight.
Do you think it would be worth to get it checked by Samsung.. I hope they do give at least an estimate of the repair cost.
From what I have read in the forums here Samsung would charge around 260 $ on a new motherboard which would cost around 260$ and with the same amount I can buy a new Moto G.. so that's that.. waiting for the jig and then will make a call on what to do..
Please let me know if there is something else I can do to salvage this phone. Thanks
myeviltwin said:
Had gone on a work related trip hence the gap.. Got an external charger but didn't help.. same result..
Too much of a hassle to get the resistors where i live.. Have ordered one for myself now.. and that I believe is going to be my last hope or else I am going to have a very expensive paperweight.
Do you think it would be worth to get it checked by Samsung.. I hope they do give at least an estimate of the repair cost.
From what I have read in the forums here Samsung would charge around 260 $ on a new motherboard which would cost around 260$ and with the same amount I can buy a new Moto G.. so that's that.. waiting for the jig and then will make a call on what to do..
Please let me know if there is something else I can do to salvage this phone. Thanks
Click to expand...
Click to collapse
Yes, try the JIG and if that too doesn't work, get an estimate atleast from Samsung (no harm in it). There are always repair technicians in the famous market (if you know which place i am referring to)
treacherous_hawk said:
Yes, try the JIG and if that too doesn't work, get an estimate atleast from Samsung (no harm in it). There are always repair technicians in the famous market (if you know which place i am referring to)
Click to expand...
Click to collapse
Got the jig today.. Still nothing the screen remains black even if I plug in the jig.. No download mode.. Connecting it to pc after removing the jig, with ODIN on also doesn't show any sign of life.. Guess will take it to the samsung service center and will ask for their estimate.. If they charge a paisa above 5k going for the Moto G then..
The jig works, I tried it on me mum's old galaxy y so has to be the phone only.. Thanks Hawk for all the help.. and regarding the famous market I think you were referring to Gaffar isn't it
myeviltwin said:
Got the jig today.. Still nothing the screen remains black even if I plug in the jig.. No download mode.. Connecting it to pc after removing the jig, with ODIN on also doesn't show any sign of life.. Guess will take it to the samsung service center and will ask for their estimate.. If they charge a paisa above 5k going for the Moto G then..
The jig works, I tried it on me mum's old galaxy y so has to be the phone only.. Thanks Hawk for all the help.. and regarding the famous market I think you were referring to Gaffar isn't it
Click to expand...
Click to collapse
Yes that is the market i am referring to, i know someone there infact that guy used to work as a Manager in Samsung Service center, now he is running his own business.
treacherous_hawk said:
Yes that is the market i am referring to, i know someone there infact that guy used to work as a Manager in Samsung Service center, now he is running his own business.
Click to expand...
Click to collapse
That's nice.. its a always a worry that you might get ripped off there Let me visit the service center today and see what they come back with.. If all fails will PM you for your friends details and take it to him.
They are charging me 8k - 9k.. :crying:
The mobo has failed and needs replacement. Seems like its time to say to bbye to my good old note.. and to top it, I think Note has spoiled me as well.. I had a friends moto g to try its look and feel.. it seemed so puny compared to my note and didn't like it the way it was don't understand why didn't they give an expandable memory slot as well..
Looks like am going to shell out more than 20k for my new phone now Hawk do you mind PM'ing me the contact details of the guy you know in Gaffar market.. Have to go to CP today so might as well give it a shot there.

S3 Mini VE Hard bricked (DEAD)

So i have a S3 mini VE, and i was flashing a stock firmware on my phone suddenly the USB cable disconnected during the process (ODIN) now when i try to turn on the phone, it doesn't come on at all. the only way to get the phone on is to charge it (AC). but it goes into loop every 5 seconds. So when i take the battery outta the phone and then plug the charger in. It shows this message (See below) but won't go into loop. It's seriously weird. The button combo are fully dead.
So basically i can't get into the phone i tried every method, even tried USB JIG from eBay. i seriously don't know what's going on with the phone, i need help fixing this issue.
has this happened to anyone else?
Button combo (DEAD)
Flashing with ODIN (DEAD)
Download Mode (DEAD)
Recovery Mode (DEAD)
Connecting to PC (DEAD)
So i've done all this, so please don't tell me to do these again i've done em
Thanks!
Same problem
Man! How I understand you!
Recently I came up with a similar problem only with my Huawai Ascend mate 7. Even though I am able to connect the device in FASTBOOT mode and flash the recovery It just won't boot into it because there probably some mess up have happened to the device's partitions So in particular it is Hard bricked.
Reading a bit here about a hard bricking I think our best bet is to send the device to an Authorized service center. And what they can do is basically two things, first is use some so called "Hardware tool" to force the ROM re-flash. This is an ideal solution for us and ( as the Warranty is not applicable to our phones anymore) in this case we will pay less money, but we still have to . The other solution might be to replace the "Chip" or entire "Motherboard" and which might cost an arm and a leg. I am not sure it worth it then, maybe buying a new phone better and just sell this one for spares.
Anyway I am waiting for solution for me for some more time and then I will contact some authorized Huawei Service here in my City.
Haha better of just selling our device, i know for a fact i won't be able to fix it coz i tried everything i could, even USB JIG. Also tge repair service i seen will cost me around $30 which my phone is worth around that price. So im just gonna sell it off or i might just wait for couple of days to find a solution...
Sent from my Xperia Z3C using Tapatalk
Adzkii said:
Haha better of just selling our device, i know for a fact i won't be able to fix it coz i tried everything i could, even USB JIG. Also tge repair service i seen will cost me around $30 which my phone is worth around that price. So im just gonna sell it off or i might just wait for couple of days to find a solution...
Sent from my Xperia Z3C using Tapatalk
Click to expand...
Click to collapse
Well, mine cost me around 500$ or even more(I did not pay in $). You are in a so much better condition

Categories

Resources