Database Develop

Getting back to 2.3 from ICS

Hey, I wanna to get back to 2.3 from MiniCM9 (nAa) and I don't know If I should first change kernel to standard, or first ROM to 2.3. Can somebody tell me?

mati96PL said:
Hey, I wanna to get back to 2.3 from MiniCM9 (nAa) and I don't know If I should first change kernel to standard, or first ROM to 2.3. Can somebody tell me?
Click to expand...
Click to collapse
First change rom to 2.3 then flash the appropriate kernel.
I don't think it really makes a difference, just that one is slightly less risky than the other.
Sent from my E15i using Tapatalk 2

Kernel then rom, if it's rom 1st then you MIGHT have to reflash the rom anyway

Lloir said:
Kernel then rom, if it's rom 1st then you MIGHT have to reflash the rom anyway
Click to expand...
Click to collapse
No need for reflash of rom in any circumstances... point is entering flash mode to flash correct kernel is much more doable and likelier to succeed than entering a kernel embedded recovery to flash a rom.
Hence rom first, then kernel.
Sent from my E15i using Tapatalk 2

Hmm... Who to trust?
I'm curently on nAa ICS kernel and his MiniCM9, and want to get back to Achotjan Semc Debrand Engine 2.3 with nAa 11 kernel

From my experience there is no difference at all because the kernel you wanna flash has a recovery and gives you the option to flash your rom. For example when I wanted to revert back to stock without using seus I flashed the rom first and then the kernel because if I did otherwise my device would be softbricked. I hope I made my self clear. The choice is up to you. But I like flashing the kernel first;-)
Sent from my U20i using xda premium

Ok, so I tried now with kernel first -> that doesn't work, now I'm going to check with rom first

you cant build a house without foundation! flashing the kernel first is only proper way to do this!

1.put 2.3 Rom in SD
2.flash a kernel
3.on 1st boot(at kernel logo)push back button rapidly to enter cwm
4.make a full wipe and install 2.3 rom
5.done

zmuhammx said:
1.put 2.3 Rom in SD
2.flash a kernel
3.on 1st boot(at kernel logo)push back button rapidly to enter cwm
4.make a full wipe and install 2.3 rom
5.done
Click to expand...
Click to collapse
exactly right~!

It doesnt mattersjust do both no matter which first
Sent from my E15i using XDA

[Q] [KERNEL][ICS][2.6.35.7] CK Kernel 0.2b HELP

[KERNEL][ICS][2.6.35.7] CK Kernel 0.2b HELP....
need help on how to install this ROM?
Cn anyone help me step by step?
here's the link
http://forum.xda-developers.com/showthread.php?t=1728461
this is my phone detail
android version = 2.3.5
baseband version = PR323
Kernel Version = Apps_2.6.35.7 -perf

Bro mentioned link for kernel ....????
Not for rom ...
If you want flash kernel only so can flash it ....
Just download the link ...... but its ics kernel and you are using GB ..... first u need to upgrade in ics rom ....
Sent from my FIH-FB0 using xda premium

so how to flash it?
i dont understand cz very new with android..
i already hv SUT LR n also hv download the ROM..
hv to install it to my phone???
what need to do 1st?

apaini said:
so how to flash it?
i dont understand cz very new with android..
i already hv SUT LR n also hv download the ROM..
hv to install it to my phone???
what need to do 1st?
Click to expand...
Click to collapse
First you need SUT LR 1.8.2. Link to SUT LR which worked for me.
Then you need to download Andro-id V3.3 RC3.
Link to the post
Direct link to the ROM
Flash the ROM with SUT LR. Here is a easy to understand video made by ̶H̶a̶r̶e̶e̶ leoaeries.
Hit thanks to leoaeries H̶a̶r̶e̶e̶ , if the video helped you.
After installation, you will have CWM installed by default
Go ahead and flash ROMs of your choice (be careful you can only install .35 kernel ROM, if you need to try .32 kernel roms you need to downgrade to Gingerbread 2.3.x stock, looks like your stock is .35)
Try ICS CM9, IceColdSandwich or MIUI V4 ROMs, you will like it :laugh:
Welcome to the Android, the world of unlimited possibilities and great user support.

apaini said:
so how to flash it?
i dont understand cz very new with android..
i already hv SUT LR n also hv download the ROM..
hv to install it to my phone???
what need to do 1st?
Click to expand...
Click to collapse
if you want to some help or need to upgread to ics,go thread rom ics and ask what do you want to know

elol said:
if you want to some help or need to upgread to ics,go thread rom ics and ask what do you want to know
Click to expand...
Click to collapse
I think for QA should be in here, dev section is for development things like bugs report and solving.

Problems booting to install Roms

Because some roms are left hanging in the beginning and not booting, my phone is a Huawei U9000 X6, I tested several of the forum but none work properly, now I have Android v2.3.7 and want to do the upgrade to 4.0.
In advance thank you very much.

TheMasterMindGT said:
Because some roms are left hanging in the beginning and not booting, my phone is a Huawei U9000 X6, I tested several of the forum but none work properly, now I have Android v2.3.7 and want to do the upgrade to 4.0.
In advance thank you very much.
Click to expand...
Click to collapse
You gotta remember this ;-
You need kernel 2.6.35.7 for all ICS (Ice Cream Sandwich) Roms
You need kernel 2.6.32.9 for most GB (Ginger Bread) Roms
Android RC3 runs on 2.6.35.7
I think you should flash RC3 via SUT. Flashing RC3 gives you a stable OS and automatically gives you Clockworkmod so you can boot into recovery and flash any ics rom directly after this or any 2.6.35.7 based GB Rom
For some reason though, on neither kernels, this -http://forum.xda-developers.com/showthread.php?t=1619837 boots for me.
The indicator of wrong kernel is Blue screen on bootup

nachiketa.ramesh said:
You gotta remember this ;-
You need kernel 2.6.35.7 for all ICS (Ice Cream Sandwich) Roms
You need kernel 2.6.35.2 for most GB (Ginger Bread) Roms
Android RC3 runs on 2.6.35.7
I think you should flash RC3 via SUT. Flashing RC3 gives you a stable OS andautomatically gives you Clockworkmod so you can boot into recovery and flash any ics rom directly after this or any 2.6.35.7 based GB Rom
For some reason though, on neither kernels, this -http://forum.xda-developers.com/showthread.php?t=1619837 boots for me.
The indicator of wrong kernel is Blue screen on bootup
Click to expand...
Click to collapse
thank you very much for your valuable help, the problem I think is the kernel that I have now:
kernel: 2.6.32.9.
is there any way I can change the current kernel??

TheMasterMindGT said:
thank you very much for your valuable help, the problem I think is the kernel that I have now:
kernel: 2.6.32.9.
is there any way I can change the current kernel??
Click to expand...
Click to collapse
Flashing RC3 automatically gives you the ics kernel.
You can also use CK Kernel 0.4d in dev threads and flash via cwm but it will not work with your current rom

nachiketa.ramesh said:
Flashing RC3 automatically gives you the ics kernel.
You can also use CK Kernel 0.4d in dev threads and flash via cwm but it will not work with your current rom
Click to expand...
Click to collapse
thank you very much by observation I will look for files on the issues.

Here are the links you can refer to
RC3-
http://forum.xda-developers.com/showthread.php?t=1446449
CK Kernel 0.4d
http://forum.xda-developers.com/showthread.php?t=1728461

Help From .35 kernel to .32 kernel possible?
Hi i just wanted to ask since im on .35 kernel and using an ICS based rom CM9/AOKP ROM, how will i be able to go back to .32 kernel any links where i can get it and how to do it? i want to go back to MIUI .2.4.13 by free radical? thanks

endlesone said:
Hi i just wanted to ask since im on .35 kernel and using an ICS based rom CM9/AOKP ROM, how will i be able to go back to .32 kernel any links where i can get it and how to do it? i want to go back to MIUI .2.4.13 by free radical? thanks
Click to expand...
Click to collapse
Possible
Flash RC 1 through SUT LR
then Flash MIUI by FR
enjoy

RC1 from Andro id v3.3 rc1?
vivekb said:
Possible
Flash RC 1 through SUT LR
then Flash MIUI by FR
enjoy
Click to expand...
Click to collapse
by RC 1 you mean FB0G-Andro-ID_V3.3-RC1.7z
thanks

endlesone said:
by RC 1 you mean FB0G-Andro-ID_V3.3-RC1.7z
thanks
Click to expand...
Click to collapse
Yes. That should do the trick.
As an alternative, you can still flash GB stock from your manufacturer (most likely .32 kernel).

=)
k1chy said:
Yes. That should do the trick.
As an alternative, you can still flash GB stock from your manufacturer (most likely .32 kernel).
Click to expand...
Click to collapse
thanks for the reply.

After spending all night struggling with installing the kernel achieves install this ROM but I use the touch screen, anyone know what I can do???
rom is:
http://forum.xda-developers.com/showthread.php?t=1798814

[Q] help about kernel

im now on cm 9 with ydracore kerenl 5.3.its ok to return to ics 4.0.4 ?

idoguy said:
im now on cm 9 with ydracore kerenl 5.3.its ok to return to ics 4.0.4 ?
Click to expand...
Click to collapse
You mean TW ics 4.0.4 rom? Anyways as long as you are on this safe kernel, you can flash any rom and it will be safe.
Check this, just few post above yours

as i see hydracore is a global kernel right ?i can flash any rom i want right?
and yes i want to return to tw 4.0.4 tw as exemple:kingdroid

idoguy said:
as i see hydracore is a global kernel right ?i can flash any rom i want right?
and yes i want to return to tw 4.0.4 tw as exemple:kingdroid
Click to expand...
Click to collapse
Right but after flashing new rom the kernel will be replaced by the one included in rom.
In KD rom you will get option to choose kernel in aroma but it has Notecore, you can later flash Hydracore (latest) if you want to.

thanks allot man.you helped me

idoguy said:
thanks allot man.you helped me
Click to expand...
Click to collapse
You just need to be on a safe kernel to flash rom, no matter if it is Hydracore or Speedmod or some other. It will be then replaced by the kernel included in ROM and you can always change the kernel as per your preference.

[Q] Newbies On Rom & Root

hi guys im new to roms , kernels and roots. So what i have is a samsung galaxy note which is kinda outdated using gingerbread 2.3.6. Since i saw lots of post about fantastic rom such as the rocketrom , alliancerom and alot more and they also come with JellyBeans.
The main problem i facing is , i would like to know about the facts that after playing with roms what will happen to my phone ? i mean in future will the devices gone wild or maybe dead. I have no idea wth that , so i hope someone enable to give me some advices and consequences of doing these. Any helpful tips will be much appreciate. =)
i wish to change my phone into rocketrom with the latest version of it. so is there any kernels that i can use which is absolutely stable & brickfree.
THANKS FOR ANY HELPFUL TIPS =)

running GB... and want to go to JB
1. root
2. install CWM
3. download Rocket rom on to storage
4. boot into cwm
5. wipe data factory reset, wipe cache, wipe dalvik, format /system
5. install the rom
do a lot of reading

Playing with roms doesnt make your phone go wild or get bricked until u flash a rom in a wrong way
And you always need to be on a safe kernel before u flash a rom
As u are on gb,all stock gb roms are safe to flash..so root your phone and get cwm
Then do wipes and flash the rom

rajsekhar.300 said:
Playing with roms doesnt make your phone go wild or get bricked until u flash a rom in a wrong way
And you always need to be on a safe kernel before u flash a rom
As u are on gb,all stock gb roms are safe to flash..so root your phone and get cwm
Then do wipes and flash the rom
Click to expand...
Click to collapse
thanks for the helpful tips , so can u guys recommend me some BRICKFREE absolute STABLE Kernel for RocketRom V2.. Thanks ? :laugh::laugh:

JasonAkon said:
thanks for the helpful tips , so can u guys recommend me some BRICKFREE absolute STABLE Kernel for RocketRom V2.. Thanks ? :laugh::laugh:
Click to expand...
Click to collapse
All gb roms are safe to flash..so just get rooted and flash rocketrom
And rocketrom comes with a safe and brickfree kernel,so its not required to flash another kernel after u flash rocketrom
And i guess there are no other kernels compatible with jb roms other than the philz kernel that comes with the rom

rajsekhar.300 said:
All gb roms are safe to flash..so just get rooted and flash rocketrom
And rocketrom comes with a safe and brickfree kernel,so its not required to flash another kernel after u flash rocketrom
And i guess there are no other kernels compatible with jb roms other than the philz kernel that comes with the rom
Click to expand...
Click to collapse
i second that.. use Philz kernel that comes with the rom. Tested i flashed Hydracore and my phone wont boot. had to flash back RRv2 JB.

hydracore v7 does not work with the tw based roms jb as of now. and will not work until an official jb rom is released.

IcIc
btw how bout kernel which fits properly without brick with RocketRom ICS V12 :laugh::laugh::laugh: