[Q] New 8.9 owner amd noob needs help rooting - Galaxy Tab 8.9 General

So i got the 8.9 last week and am pretty happy so far. My main uses are internet surfing and hd videos from youtube and play store. However one of my only complaints is that this thing isnt the fastest. I upgraded to official ics when i first got the tab and its not bad but still id like to install Asop jellybean and overclock the tab to 1.2 or 1.4. However id hate to brick my tab which i see on here all the time. The only problem is i have no idea how to root, even after reading and searching for the past week. My question is could some one tell me or show me a link to show EXACTLY how to root to the newest asop jb from official ics without bricking and then tell me how to oc it? I am such a noob with this, I dont know what kernels or anything is. Any help would be greatly appreciated.

Not sure how missed this thread in the list. It's stickied at the very top.
http://forum.xda-developers.com/showthread.php?t=1406137

Follow these steps in the link:
http://forum.xda-developers.com/showthread.php?t=1287205

noridomi.bimbim said:
Follow these steps in the link:
http://forum.xda-developers.com/showthread.php?t=1287205
Click to expand...
Click to collapse
or search on youtube

Good thing i didn't go a head and try to root. I have official ics installed and apparently you have to flash so,e cmw rom or something but i have no idea how to do that, i have searched the forums and all the instructions are just kind of bland and not real specific. Sad as it is, i am someone who needs exact instructions and explanations of how to specifically complete each instruction. Sorry that i am being a pain. I just bought thus tab on a amazon credit card and have not even, ade the first payment that is why I am so worried about bricking or messing up the tab. Thanks for any help

Install cwm 6.0.10 http://forum.xda-developers.com/showthread.php?t=1406137
Install ics by tracid based on taiwan stock rom official http://forum.xda-developers.com/showthread.php?t=1406137
No need rooting..already root when install ics by tracid..read instructions carefully
Sent from my GT-P7300 using XDA Premium HD app

hwooei said:
Install ics by tracid based on taiwan stock rom official
Click to expand...
Click to collapse
Hmm. I'd be careful recommending ROMs just yet. He hasn't mentioned which model of 8.9 Tab he has.
Given that he mentions he's already on ICS I'd assume he's probably got a wifi-only P7310. He doesn't mention any other radio types (3G, LTE, etc.).
@Wrebbs, what model 8.9 tab do you have?

boscorama said:
Hmm. I'd be careful recommending ROMs just yet. He hasn't mentioned which model of 8.9 Tab he has.
Given that he mentions he's already on ICS I'd assume he's probably got a wifi-only P7310. He doesn't mention any other radio types (3G, LTE, etc.).
@Wrebbs, what model 8.9 tab do you have?
Click to expand...
Click to collapse
I have the wifi only, 7310. Thanks for taking the time to help with this

I've tried various roms and liked cm10 very much. Had to flash stock 3.2 via odin to get rid of the garbled screen issue and decided to try update OTA to ics that worked and i'm running stock ics on my dutch 7310 now this works fairly well, so i am going to wait untill the battery drain issue is being fixed on cm10 and try again then
Sent from my GT-P7310 using XDA Premium HD app

Wrebbs said:
I have the wifi only, 7310. Thanks for taking the time to help with this
Click to expand...
Click to collapse
Not happy with the stock ICS version of the Tab? Did it upgrade over kies? Are you in the US? I am in Europe and have the 3G version. Have to use a ported rom from 7500 to get ICS.
The ICS I have runs really smooth! Price was good aswell. Strange that your TAB is slow...
Only problem I have is that Adobe Flash gives me some trouble in HD and on some sites.
I tried HC 3.2 Stock, CM10 JB 4.1, SafariKing ICS and ported ICS from 7500 v2 and honestly - If I had stock original ICS I think I would stay with it! The Jellybean ROMs still have issues. in Alpha Beta stages.
The Tracid rom mentioned might be the next rom I try, but still happy with the ICS rom I have. If it aint broke don't fix it... (Itchy though, flashing roms is fun.)

Take it from someone whos hard bricked before, take your time and do your homework. Make sure you know the rom is for your specific device. You're not going to see drastic speed increases even if oc'd. So take your time and re-read everything. Your going to have to flash a recovery first, cwm or twrp through odin. Again, make sure it's for your device. Then you can root or flash a rooted rom. Once again, make sure it's for your device.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app

Related

[Q] Galaxy Tab Wifi rooting and flashing

my coworker just got a gtab wifi only, ive rooted a bunch of phones before but not this device yet. which roms will i be able to flash on this device?
thanks in advance.
It would seem at the moment no big devs are putting any custom roms out for the wifi only tab (GT P 1010).
There is one rom available but to my understanding its only a stock rom with some bloatware removed and extra language support. (Thread in tab development)
I myself have had the GT P 1010 for almost a month now, rooted with Z4, one click lag fixed but still running stock nastiness. I have posted up here about the possibility of getting a CWM running on our tabs, first priority for me personally, but no one seems to have any answers?
Oh and if my sig still says that its bricked, one word, ODIN. Bloody life saver.
Sent from my HTC Desire
x5starguerillaa said:
It would seem at the moment no big devs are putting any custom roms out for the wifi only tab (GT P 1010).
There is one rom available but to my understanding its only a stock rom with some bloatware removed and extra language support. (Thread in tab development)
I myself have had the GT P 1010 for almost a month now, rooted with Z4, one click lag fixed but still running stock nastiness. I have posted up here about the possibility of getting a CWM running on our tabs, first priority for me personally, but no one seems to have any answers?
Oh and if my sig still says that its bricked, one word, ODIN. Bloody life saver.
Sent from my HTC Desire
Click to expand...
Click to collapse
I think he's referring to the Sprint Stock Gingerbread update/rom which i've heard does in fact work on the wifi only tab. There is a rooted version of it available as well. Check the Development thread and you'll find it.
Really!!!!! A gingerbread rom that will work on the wifi only tab?
I was under the impression that no roms designed for the GSM tab would work on the wifi tabs? Different hardware and supposedly a different processor?
Not that I'm doubting you but where did you get your source that it will work on the wifi only tab?
TIA.
Sent from my HTC Desire using XDA Premium App
Be very careful. I hard-bricked mine when trying to flash gingerbread on 1010. DONT DO IT, if its not stated it works with 1010

What is overcome

Its more than a month ive taken my tab GALAXY TAB P1000 and havent flashed anything yet just rooted it. Please tell me what is overcome and how is it better than stock rooted gingerbread. Tell me how to flash it through xrec only or something else. Well im afraid if i do something wrong then how will i be able to restore the stock firmware.
Please do reply it could not help only me but many other. . . . . .
Sent from my GT-P1000 using xda premium
dhruv2coool said:
Its more than a month ive taken my tab GALAXY TAB P1000 and havent flashed anything yet just rooted it. Please tell me what is overcome and how is it better than stock rooted gingerbread. Tell me how to flash it through xrec only or something else. Well im afraid if i do something wrong then how will i be able to restore the stock firmware.
Please do reply it could not help only me but many other. . . . . .
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
overcome is ROM for Galaxy Tab and other devices, i have the lastest version (4.0), it adds tweaks like Fastest GPS, Changue User Agent, Overclock, ETC. its much faster than stock due to Ext4 (lagfix), improved sound (Voodoo sound), better RAM control, i love it.
its very stable and fast than the stock gingerbread. you can find it in development section.
just follow the instructions to the letter and you will be fine.
http://forum.xda-developers.com/showthread.php?t=1317384
Overcome was my first rom flashed on my tablet and overcome is fast and save a lot of battery.
The few days ago I flash miui and miui consume much more battery.

[Q] ics camera youtube vids!?

Hi all i recently got a galaxy 8.9 gt-p7310 tab with ics already on is there anyway to use the camera with ics ? also cant view videos on youtube can any1 help me with this
markojadeo said:
Hi all i recently got a galaxy 8.9 gt-p7310 tab with ics already on is there anyway to use the camera with ics ? also cant view videos on youtube can any1 help me with this
Click to expand...
Click to collapse
you got a tab with ics installed???? im guessing you bought it used and someone installed one of the custom roms...if you got it new with ICS this would be quite something.
camera so far doesn't work in any ics rom. if you want the camera you gotta flash honeycomb again.
has for youtube HW videos not working im guessing the custom rom istalled is an old version. the newer ones work fine with youtube. i would flash the newest version of soup or cm9 if i were you.
lol yes its used as you can prob guess i'am abit new to tabs its my 1st one! so you suggest returning to stock fireware not starting a fresh?
markojadeo said:
lol yes its used as you can prob guess i'am abit new to tabs its my 1st one! so you suggest returning to stock fireware not starting a fresh?
Click to expand...
Click to collapse
its your decision. if you need the camera honeycomb is your only option at the moment. (stock/overcome/ganbarou)
if not i would definately advise you to use ICS. check the developement thread and chose one of the newer ICS versions. (soup/cm9)
http://forum.xda-developers.com/forumdisplay.php?f=1441
Just to double check seeing as i'am a noob i dont have to do anything other than download n install the cm9 update? i dont need to flash before hand do i?
markojadeo said:
Just to double check seeing as i'am a noob i dont have to do anything other than download n install the cm9 update? i dont need to flash before hand do i?
Click to expand...
Click to collapse
i would advise you to read the great guide by nirogu:
http://forum.xda-developers.com/showthread.php?t=1406137
you download the zip. copy it to your tab. then reboot into recovery (which im guessing is installed)
then do a full factory reset / wipe (warning this will delete your apps but not your data like photos/music etc)
then select flash .zip and chose the zip file containing the rom. let it install and you are done.
but READ THE GUIDE! you will learn a lot and a lot of question you have will be answered!!
cheers pal

galaxy tab 8.9 (non-LTE) ICS Question

Hi guys,
I have this question...
I have a Galaxy tab 8.9 (non-LTE). My current software is 3.2.
My country does not have the UPGRADE to 4.0 ICS...
Im thinking if i can install ICS software from other country?
and will it affect my 3g service?
There is an official ROM in the development section. It's called:
[ROM][ICS][OFFICIAL][P7300] P7300ZSLP7 stock+rooted+voice calls
If is the only 7300 official ICS ROM that exists as far as I know. I installed it on my 7300. Been running flawlessly. My 3G connectivity works great also, so long as you set up the APN for your carrier properly.
Good luck. Read the instructions carefully. Do not install any third party ROM unless you are rooted with an alternate recovery installed. Having a recovery like CWM or TWRP lets you get out of trouble when you screw things up.
harry_fine said:
There is an official ROM in the development section. It's called:
[ROM][ICS][OFFICIAL][P7300] P7300ZSLP7 stock+rooted+voice calls
If is the only 7300 official ICS ROM that exists as far as I know. I installed it on my 7300. Been running flawlessly. My 3G connectivity works great also, so long as you set up the APN for your carrier properly.
Good luck. Read the instructions carefully. Do not install any third party ROM unless you are rooted with an alternate recovery installed. Having a recovery like CWM or TWRP lets you get out of trouble when you screw things up.
Click to expand...
Click to collapse
Thanks for your great advice...
Sent from my LG Optimus Black using xda app-developers app

[Q] Stuck with Ginerbread 2.3.6, Slowdown. Need Help

Hi Guys,
I am a Galaxy S user. My Galaxy S was bought in Finland and still running (basically stuck with) Ginerbread 2.3.6 (I9000xxJVU). The phone's hardware is just fine (except slow GPS) but it has become paninfully slow and sometime shutting down/restarting on it's own.
Is it a good idea to reset the existing GingerBread 2.3.6 or get a different ROM?
I am a total novice and have not tried any other ROMs on it. I did some research about the alternative ROMs but there are so many options it made me really confused.
Could you guys suggest any stable and fast option for my Galaxy S i9000?
Also, if you could guide how I could migrate to that particular ROM from present Gingerbread, it would be really helpful.
Thanks in advance for your support and for this great forum.
Cheers
SKT
No reply?!
Could anyone please help?
Hi,I'm not going to be much help as I'm a noob myself but I can say I had same stock laggy gt 19000 which through like u said a lot of confusion about rooting and ROMs researching XDA and YouTube you can do it my galaxy s is like a new phone so stick with it,one tip is always stick to you model and kernel version and write things down and I hope it goes as well as it did for me. Btw I used Odin 3.1 and clockwork to root and Flashed ROM with Cm 10.1 stable.
Sent from GT-19000 CM 10.1. stable
saiko7 said:
Hi Guys,
I am a Galaxy S user. My Galaxy S was bought in Finland and still running (basically stuck with) Ginerbread 2.3.6 (I9000xxJVU). The phone's hardware is just fine (except slow GPS) but it has become paninfully slow and sometime shutting down/restarting on it's own.
Is it a good idea to reset the existing GingerBread 2.3.6 or get a different ROM?
I am a total novice and have not tried any other ROMs on it. I did some research about the alternative ROMs but there are so many options it made me really confused.
Could you guys suggest any stable and fast option for my Galaxy S i9000?
Also, if you could guide how I could migrate to that particular ROM from present Gingerbread, it would be really helpful.
Thanks in advance for your support and for this great forum.
Cheers
SKT
Click to expand...
Click to collapse
if you want to stay to 2.3.6 you can just factory reset your phone
Try this
Shut your Android Galaxy S down (Power off) or remove Battery.
Now press Volume up, Home and Power together.
If the Samsung Symbol is coming up leave the Home Button.
Then there is a boot Menu
Volume Up and Down to Navigate , Home to select the chosen option. ( factory reset )
---------------
if you want to upgrade to ICS or JB rom
root your firmware , choose the right cf-root from this thread
http://forum.xda-developers.com/showthread.php?t=788108
download ICS rom ( i suggest this one )
http://forum.xda-developers.com/showthread.php?t=1687727
install it via recovery
if you want to upgrade to JB
go to development section , chose any custom rom you want
and install via recovery
push thanks :good: if i helped you
The Tox said:
if you want to stay to 2.3.6 you can just factory reset your phone
Try this
Shut your Android Galaxy S down (Power off) or remove Battery.
Now press Volume up, Home and Power together.
If the Samsung Symbol is coming up leave the Home Button.
Then there is a boot Menu
Volume Up and Down to Navigate , Home to select the chosen option. ( factory reset )
---------------
if you want to upgrade to ICS or JB rom
root your firmware , choose the right cf-root from this thread
http://forum.xda-developers.com/showthread.php?t=788108
download ICS rom ( i suggest this one )
http://forum.xda-developers.com/showthread.php?t=1687727
install it via recovery
if you want to upgrade to JB
go to development section , chose any custom rom you want
and install via recovery
push thanks :good: if i helped you
Click to expand...
Click to collapse
Thank you mistrp74 and The Tox for the help.
I am still a bit confused, I cant seem to locate the right cf-root [Ginerbread 2.3.6 (I9000xxJVU)] from the thread you mentioned.
One more thing, how is your experience of running the Custom Roms, is it much better than the Samsung Firmware? Does all the function work fine?
I will need a bit of spoon feeding in the beginning for the update... as I have never tried it before and I am scared of bricking my phone.
So, please don't give up on me
saiko7 said:
Thank you mistrp74 and The Tox for the help.
I am still a bit confused, I cant seem to locate the right cf-root [Ginerbread 2.3.6 (I9000xxJVU)] from the thread you mentioned.
One more thing, how is your experience of running the Custom Roms, is it much better than the Samsung Firmware? Does all the function work fine?
I will need a bit of spoon feeding in the beginning for the update... as I have never tried it before and I am scared of bricking my phone.
So, please don't give up on me
Click to expand...
Click to collapse
The right CF-Root is in the seond to last post on the first page I believe- if you can fnd the one for XXJW4, the one you need is right above it
Custom ICS/JB roms are definitely smoother in many ways, although bear in mind because stock Jelly Bean don't include them, both FM Radio and 3G video calling won't work by default (two features of stock roms, I guess AllShare is another if you use it like me). Otherwise every other function is stable and rock solid. Except for the CM10.2 builds, which are still in an initial stage, the JB roms here should have everything working fine.
Sent from my GT-P7510
Thanks a lot guys!
I finally managed to do it.
I installed the CF-Root without any problem but RemICS-UX v1.3.1 (Team Remics) didn't load. It was stuck at the boot screen.
I thought I bricked my phone... but then I installed Ginerbread 2.3.6 (I9000xxJVU) using Odin and then installed plain vanilla ICS 4.0.3
Coming from Ginerbread 2.3.6 I find a lot of new things and the phone is also snappy and responsive... my old Galaxy S is acting almost like a new phone! So I am really happy.
Now that I am familiar with the process I am confident to tryout other ROMs...
I would like something simple, lightweight and fully-functional/bug-free.
So please let me know if there is any other better ROM I should try.
Thanks again guys!
saiko7 said:
Thanks a lot guys!
I finally managed to do it.
I installed the CF-Root without any problem but RemICS-UX v1.3.1 (Team Remics) didn't load. It was stuck at the boot screen.
I thought I bricked my phone... but then I installed Ginerbread 2.3.6 (I9000xxJVU) using Odin and then installed plain vanilla ICS 4.0.3
Coming from Ginerbread 2.3.6 I find a lot of new things and the phone is also snappy and responsive... my old Galaxy S is acting almost like a new phone! So I am really happy.
Now that I am familiar with the process I am confident to tryout other ROMs...
I would like something simple, lightweight and fully-functional/bug-free.
So please let me know if there is any other better ROM I should try.
Thanks again guys!
Click to expand...
Click to collapse
Go to development section and browse thread and read members feedback , and give a try for each rom until you find your best rom
The Tox said:
Go to development section and browse thread and read members feedback , and give a try for each rom until you find your best rom
Click to expand...
Click to collapse
Thanks!
Just one more question, what's your backup strategy that you guys use?
Or else it a lot of work to update each and every app... one by one... also what about the SMS, call log etc?
saiko7 said:
Thanks!
Just one more question, what's your backup strategy that you guys use?
Or else it a lot of work to update each and every app... one by one... also what about the SMS, call log etc?
Click to expand...
Click to collapse
Because I'm a person who 1.) doesn't use too many apps and 2.) tries to be as economical as possible, I don't have a large amount to backup. My contacts and calendar are always through Google, and for SMS I use SMS Backup and Restore on Play Store. Call log I don't keep, because I'm not a person who really cares for call logs. I only have one other app, Colornote, and that's cloud-synced as well.
Everything else I need is in internal storage :3
Sent from my GT-P7510
saiko7 said:
Thanks!
Just one more question, what's your backup strategy that you guys use?
Or else it a lot of work to update each and every app... one by one... also what about the SMS, call log etc?
Click to expand...
Click to collapse
I use G CLOUD BACKUP just for Sms and system settings
Sent from my GT-I9000 using xda app-developers app
More or less similar situation as TS
Hey guys,
Im in a more or less similar situation as the topic starter. My Samsung Galaxy S GT-I9000 has gotten slow and unresponsive with time.
I would like to update to a custom ROM, and got a little curious about the Slim Bean. But I feel a little unsure about how to proceed.
I'm currently running a custom Gingerbread 2.3.3 ROM, my device is rooted. I flashed this ROM from the Froyo that came with the phone about 2 years ago. It's been so long since I flashed this, I need some directions, as Im afraid I will brick my device.
When I go to recovery mode I see it runs ClockworkMod Recovery v2.5.1.3 - Voodoo lagfix.
Can I just put a Slim Bean 4.2 android version on my internal sd card and run "install zip from sdcard" in ClockwordMod? I would prefer to flash the latest stable version of Slim Bean, which would that be 4.2.2.build7-OFFICIAL?'
Any help would be greatly appreciated,
Bootism
Best way to update from gb or even older to jb is imo the way over cyanogenmod.
Follow this tutorial for 10.1: http://wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd
And then you can upgrade via cwm to the very good slim bean.
Sent from my GT-I9000 using xda app-developers app
Thanks for the answer!
I recall reading about lots of issues with the lagfix and flashing ROMs. My file storage system is in ext4 instead of standard rfs, I think I should somehow undo this if I recall correct. Is this true?
Do you have an option to unlagfix in recovery?
Sent from my GT-P3110 using xda app-developers app
Yeah, I can choose "voodoo lagfix" in recovery.
It has the following options:
- disable lagfix
- enable lagfix (default)
- /system lagfix on (default)
- /system lagfix off
- debug off (default)
- debug on
Enter disable lagfix and reboot
Sent from my GT-I9000 using xda app-developers app
Ok, so I got Cyanogenmod 10.1.0 running! so far so good
Good job. Now you can flash a zip in cwm.
Sent from my GT-I9000 using xda app-developers app
Yeah, it's a whole new world opening up. Old phone runs relatively smooth, at least way better than before thanks for helping. I will stay on this Cyanogenmod for a bit and explore. Can I just flash in any of the ROMs as .zip in CWM later? I will look for a lightweight ROM for my old phone, any suggestions?

Categories

Resources