Database Develop

[Q] Galaxy S i9000 softbricked; won't enter recovery or reflash from download mode

Similar to Masterslackers issue.
The phone was originally a stock Optus Éclair 2.1. About 6 months ago I decided to customize the i9000 with a custom Froyo 2.2.1 Rom (Doc's Rom Docs_XWJS3_Wipe-v9_1) from “The ROM Kitchen”. It worked really well and was much faster and responsive..
Yesterday, I decided to look at a move to Gingerbread and cook another ROM @ the ROM Kitchen, this time a Gingerbread 2.3.4 iteration.
The phone was rooted so I used Rom Manager to get into recovery mode where I could flash my new, Doc's JVR_No_Wipe-v8-00-08-22-10-09-4e6a8e4e86718.zip Rom.
All seemed to go well, but after the Flash, as the phone booted the first screen became filled with 100s of random coloured lines, then it transitioned to the normal Samsung start animation, but soundless.
After booting, I noticed that I no longer had a notification bar where battery, time, signal strength etc. was normally displayed atop the screen. I tried several different launchers to see if that was the issue, but to no avail. I tried to enable the notification bar using Go Launchers gesture setting (no go)
I tried rebooting the phone over and over, the notification bar would not return.
I was starting to lament my decision to flash when the following occurred.
I tried to re-enter recovery mode via ROM Manager to install a different ROM, but the phone bypassed it and then hung @ the Samsung I9000 logo screen. I then had to power the phone off before it would reboot into its UI. I could no longer reach recovery mode by any means.
Because I was getting nowhere and I had read that after flashing a new rom, root would often be lost, so I tried rerooting with "XXJVP-Complete-Rooting-Package" from
http://androidadvices.com/how-to-root-galaxy-s-on-android-2-3-4-xxjvp-firmware/ This also failed but it has also left me with a soft bricked phone.
The phone will not boot up or boot into recovery now, however It would still boot into (3 button) download mode.
I have tried various versions of Odin from v1.0 to v4.28 to ReFlash the phone back to life but with no success yet.
Using Odin, the phone hangs with no sign of progress and reports the following when left for 30minutes or so.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
Anyone have any suggestions that might help to get the phone back.
Thanks, TeZ

So you didn't flash stock gingerbread before flashing custom rom? so you should first flash stock jvr and do hard reset after booting. Then you are safe to flash cwm capable kernel and custom rom.
For the odin problems, maybe you have kies running in background? Kill all kies processes and try again.
And I'd suggest reading all guides found in romkitchen thread..it saves lots of trouble. Hope that can fix your phone
Sent from my GT-I9000 using xda premium

Agree with above post, if you have Klies on your pc/laptop uninstall it, and re download the drivers, i have a good 2.3.4 tutorial and root 2.3.4 tutorial, both with Odin, let me know if interested. Also if you have heimdall installed then uninstall it also.

After you unistalled Kies (or at least stop it) and installed the drivers , pick a stock rom with bootloader from Ramad collection http://forum.xda-developers.com/showthread.php?t=1102881 .
I prefer Odin 1.82.
If you still unable to flash your phone, please follow steps from this guide to see how can debrick your phone.
http://forum.xda-developers.com/showthread.php?t=1134975
Good luck

Thanks for that, I did install kies after I bricked it, in the hope (probably missguided) that it would somehow help. Uninstalling

bigmadpete said:
Agree with above post, if you have Klies on your pc/laptop uninstall it, and re download the drivers, i have a good 2.3.4 tutorial and root 2.3.4 tutorial, both with Odin, let me know if interested. Also if you have heimdall installed then uninstall it also.
Click to expand...
Click to collapse
Thanks for your input, right now i need all the help I can get, hadn't heard of heimdall before. I guess its one more thing I could try if all else fails. But right now I'm going to try a few more conventional things with odin, like flash a stock rom etc.

DSGE said:
After you unistalled Kies (or at least stop it) and installed the drivers , pick a stock rom with bootloader from Ramad collection http://forum.xda-developers.com/showthread.php?t=1102881 .
I prefer Odin 1.82.
If you still unable to flash your phone, please follow steps from this guide to see how can debrick your phone.
http://forum.xda-developers.com/showthread.php?t=1134975
Good luck
Click to expand...
Click to collapse
Your post looks promising, I'm going to try this method out and see where it leads. I'll reply back with the outcome, many thanks

No problem. Try this option if you like http://www.theandroidsoul.com/xxjvp-android-2-3-4-firmware-galaxy-s-install-and-download/
And then this to root
http://www.theandroidsoul.com/root-xxjvp-firmware/

bigmadpete said:
No problem. Try this option if you like http://www.theandroidsoul.com/xxjvp-android-2-3-4-firmware-galaxy-s-install-and-download/
And then this to root
http://www.theandroidsoul.com/root-xxjvp-firmware/
Click to expand...
Click to collapse
Thanks for the info, running out of time today, will try for tomorrow

When moving from a froyo (2.2) rom to gingerbread, (2.3), you need the gingerbread bootloaders or you'll get all sorts of crap when turning on your phone (ie what you have).
Use odin to flash back to froyo, or flash a gingerbread firmware that comes with bootloaders. (I would recommend going back to froyo first to make sure everything is ok, since flashing bootloaders is a bit risky, as messing it up can permanently brick your phone)

cobrasixtysix said:
Thanks for your input, right now i need all the help I can get, hadn't heard of heimdall before. I guess its one more thing I could try if all else fails. But right now I'm going to try a few more conventional things with odin, like flash a stock rom etc.
Click to expand...
Click to collapse
DSGE said:
After you unistalled Kies (or at least stop it) and installed the drivers , pick a stock rom with bootloader from Ramad collection http://forum.xda-developers.com/showthread.php?t=1102881 .
I prefer Odin 1.82.
If you still unable to flash your phone, please follow steps from this guide to see how can debrick your phone.
http://forum.xda-developers.com/showthread.php?t=1134975
Good luck
Click to expand...
Click to collapse
Ok, here's where I'm at:
For the sake of simplicity I will detail what gave positive results rather than a tirade of what didn't.
Uninstalled Kies, rebooted
As instructed, went to:
http://forum.xda-developers.com/showthread.php?t=1102881
downloaded: Odin v1.82
downloaded: Gingerbread 2.3.3 (Australia and New Zealand)
XWJVN/XXJVQ/XSAJV5/Sbl (CSC: XSA): Download (150 MB) (Build date: Sun Jul 10 11:30:54 KST 2011)
Loaded up Odin and followed instructions.
Flash went ahead as normal and I now have a working phone again, thanks to you DSGE, I'm a very happy man
So I now have Gingerbread 2.3.3 installed and running.
My only issue's now is, that.
1. Half my apps dont work now or force close even after a reinstall.
2. Some apps won't install at all IE; my fav launcher; Go Launcher
3. I no longer have root access so Rom Manager and Titanium backup wont work.
4. My Backup Pro, works after I rewrote the correct path to the External Sd, but do I want to do that just yet? and just how much data should I reinstate so I don't corrupt the new system?
What should I do now?
Install busybox?
do a hard reset?
Flash a different Rom that will work for me?
Thanks so very much for all the good advise.
Cheers

First root the phone, then either a different rom, or format system and re install 2.3.3 or which ever u just installed, i think ure apps are not working due to the phone needing a wipe/reset and cache cleared from clockwork recovery

bigmadpete said:
First root the phone, then either a different rom, or format system and re install 2.3.3 or which ever u just installed, i think ure apps are not working due to the phone needing a wipe/reset and cache cleared from clockwork recovery
Click to expand...
Click to collapse
OK, latest update:
Everything is working fine including all my progs.
Like you say, I just need to root it now.
Can you point me to the correct files to root?
Thanks

http://www.addictivetips.com/mobile...t-samsung-galaxy-s-i9000-with-a-single-click/
or
http://androidadvices.com/how-to-root-samsung-galaxy-s-gt-i9000/
Read carefully friend

bigmadpete said:
http://www.addictivetips.com/mobile...t-samsung-galaxy-s-i9000-with-a-single-click/
or
http://androidadvices.com/how-to-root-samsung-galaxy-s-gt-i9000/
Read carefully friend
Click to expand...
Click to collapse
Seems to relate to 2.1 to 2.2.1 didn't see any mention of 2.3.3. I'm afraid I'll stuff the phone if I use the old root files.

[Q] newbie - HELP PLS - bricked?

Hi,
I came from an LG 2x, so I thought rooting my device in order to have some extra authorizations was no big deal. I first tried with pc software Unlockroot, but it failed in the process.
Being my GB 236 Note quite dirty I wanted to do some extra backup and cleanup. So I googled and stopped at rootyourgalaxynote.com, I tried the first ROOT method, not working, I tried the second method with pc ODIN 3.04 and abyss kernel 42, ODIN says it worked, note reboots but it stops at Samsung galaxy Note Gt-N7000 with yellow triangle. shocked, I didnt really expect that! After reading a little bit else, I went to sammobile downloaded italian gb 236 stock (the version I had befor kernel flashing) and tried to flash with PC Odin. It Failed. Device still gets in download mode. But now I'm seriously worried. What can I do?
[UPDATE]: I tried using Odin 1.85 and the same gb 236 stock rom but it stops half the factoryfs.img flashing...please explain me what's happening. I don't really want to bring it in assistance and lose my warranty

strangermyself said:
Hi,
I came from an LG 2x, so I thought rooting my device in order to have some extra authorizations was no big deal. I first tried with pc software Unlockroot, but it failed in the process.
Being my GB 236 Note quite dirty I wanted to do some extra backup and cleanup. So I googled and stopped at rootyourgalaxynote.com, I tried the first ROOT method, not working, I tried the second method with pc ODIN 3.04 and abyss kernel 42, ODIN says it worked, note reboots but it stops at Samsung galaxy Note Gt-N7000 with yellow triangle. shocked, I didnt really expect that! After reading a little bit else, I went to sammobile downloaded italian gb 236 stock (the version I had befor kernel flashing) and tried to flash with PC Odin. It Failed. Device still gets in download mode. But now I'm seriously worried. What can I do?
[UPDATE]: I tried using Odin 1.85 and the same gb 236 stock rom but it stops half the factoryfs.img flashing...please explain me what's happening. I don't really want to bring it in assistance and lose my warranty
Click to expand...
Click to collapse
First you should t have flash abyss through odin since now you are not rooted and do t have the warranty too, the counter of flashes increased to 1 (look at the download mode small text), for rooting you can use chainfire's tool (in the cf-root kernel thread look for it in devolepment section) next get a stock rooted kernel and flash using the tool (read instructions).
For now use pc odin 1.87 and get a firmware 2.3.6 use the pc odin select the file on PDA and flash it, make sure phone is charged 100% and press start, if it doesn't work then uninstall drivers, reboot machine, reinstall them and kill kies process if present in task manager and then goto download mode connect USB and open pc odin wait for the port to be ready aka green and select file then start.... you should be fine its a soft brick afterall.
Sent from my GT-N7000 using Tapatalk 2

Yeah I know atm I don't have system nor root nor warranty.
I tried odin 1.87 with the stock rom from sammobile but at one point or another is it cache.img or factoryfs.img, it fails (I also uninstalled kies and drivers and reinstalled them, i also tried installing only drivers, for at&at note, but it doesn't let me). I'm gonna download another stock rom, I just hope in some way I soon solve the thing, given that I also don't know how much charge is left and if the phone still gets charged. it just displays an idle circle near an empty battery when connected to pc or A\C cable.

strangermyself said:
Yeah I know atm I don't have system nor root nor warranty.
I tried odin 1.87 with the stock rom from sammobile but at one point or another is it cache.img or factoryfs.img, it fails (I also uninstalled kies and drivers and reinstalled them, i also tried installing only drivers, for at&at note, but it doesn't let me). I'm gonna download another stock rom, I just hope in some way I soon solve the thing, given that I also don't know how much charge is left and if the phone still gets charged. it just displays an idle circle near an empty battery when connected to pc or A\C cable.
Click to expand...
Click to collapse
When connected to charger make sure phone is off the battery meter will show as soon as you connect, case it doesnt leave it for like 3 hours is fine... next about that ROM redownload. The package cleanup you temp directories in PC and try again if still goto recovery abyss I guess? Wipe everything and use the mount option and format partitions I would recommed you to have repartition but I dont have the file you can look for ot in forum its. PIT file download fireup odin select it in PIT section and see if repartitioning is shocked, of so select firmware as PDA and flash again.
Sent from my GT-N7000 using Tapatalk 2

REVERSiN said:
... if still goto recovery abyss I guess? Wipe everything and use the mount option and format partitions I would recommed you to have repartition but I dont have the file you can look for ot in forum its. PIT file download fireup odin select it in PIT section and see if repartitioning is shocked, of so select firmware as PDA and flash again.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Thx for your prompt answer, but I really didn't catch this part, if it still fails I must go in recovery and wipe cache and dalvik cache?I don't have CWM installed as rooting was the first flashing I tried on NOTE, so I don't have recovery installed. Since it stopped in the middle of flashing factoryfs.img, my Note is now displaying sth like 'updrading went wrong, try recovery mode in Kies': can it help in anyway? The PIT file and procedure are the same that are used for the EMMC bug?

strangermyself said:
[UPDATE]: I tried using Odin 1.85 and the same gb 236 stock rom but it stops half the factoryfs.img flashing...please explain me what's happening. I don't really want to bring it in assistance and lose my warranty
Click to expand...
Click to collapse
If you are stcuk at factoyfs.img I think you have got a super Brick
use this link and follow the instructions given.. Worked for me
http://forum.xda-developers.com/showthread.php?t=1682444

Whiskeyjack4855 said:
If you are stcuk at factoyfs.img I think you have got a super Brick
use this link and follow the instructions given.. Worked for me
http://forum.xda-developers.com/showthread.php?t=1682444
Click to expand...
Click to collapse
Dude its a GB rom not superbrick bug in it and he didn't mention LPY yet.
Sent from my GT-N7000 using Tapatalk 2

strangermyself said:
Thx for your prompt answer, but I really didn't catch this part, if it still fails I must go in recovery and wipe cache and dalvik cache?I don't have CWM installed as rooting was the first flashing I tried on NOTE, so I don't have recovery installed. Since it stopped in the middle of flashing factoryfs.img, my Note is now displaying sth like 'updrading went wrong, try recovery mode in Kies': can it help in anyway? The PIT file and procedure are the same that are used for the EMMC bug?
Click to expand...
Click to collapse
Sorry for tea doubled post its a dumb app X's
You wipe using the CWM file in the Iss root section, and a normal recovery wipe would do too (aka restore defaults)
Sent from my GT-N7000 using Tapatalk 2

Hi REVERSIN,
Thx. I was starting to fear it could be sth more than a soft brick. Can the initial use of unlockroot have caused anything (at least a week ago, Note still working after that)?
Sorry but I really can't understand what procedure should I follow since these initial attempts at flashing stocks failed. Should I try to flash CWM? What is the ISS root section (is it in the forum)? Where can i do a normal recovery wipe from? CWM I guess..
THX for your help

strangermyself said:
Hi REVERSIN,
Thx. I was starting to fear it could be sth more than a soft brick. Can the initial use of unlockroot have caused anything (at least a week ago, Note still working after that)?
Sorry but I really can't understand what procedure should I follow since these initial attempts at flashing stocks failed. Should I try to flash CWM? What is the ISS root section (is it in the forum)? Where can i do a normal recovery wipe from? CWM I guess..
THX for your help
Click to expand...
Click to collapse
If you have the stock recovery, restore default wipes everything.
If you have stock re every and want CWM temporary just to wipe goto n7000 devolepment and check how to root by dr.ketan and get files there
If you have CWM then wipe data, wipe cache, wipe dalvik.... and try. Old download another firmware like kk5.... something else not the new LC1 LX1 releases.... (Latest GB) get an old one to get root easly
Sent from my GT-N7000 using Tapatalk 2

Semi-Brick....could be the eMMC brick!?!?

Hello all,
I recieved a Galaxy Note for repair from a friend of mine. She says that the phone was working normally until it rebooted and then didnt get past the first Samsung Galaxy Note Logo.....she took it to samsung who said it was a faulty motherboard (hint: possible eMMC brick, though in India, thats their go-to response). The phone now shows a firmware upgrade failed sign (PHONE----------!-----------PC) telling me to plug it into Kies, which doesnt recognize it. It doesnt go into recovery mode at all but goes into download mode. I opened odin and flashed a stock gb rom with pit file(repartition ticked). The phone gets stuck at Set Partition. Have tried different Odins, different USB Cables, ticking diff. options in odin and god knows what else. How do i get this phone up and running? Is it the emmc brick bug? I think it is...

did you kill kies processes before using odin?

Yup. Done already....no change

if it gets stuck at repartition process, then its more than an eMMC brickbug. How its the phone right now?, can you go to recovery?. The best you can do: flash a safe kernel and then a cyannogenmod (or AOSP) rom, if it boots (probably you will get a lot of force closes), try to flash a jelly bean stock rom (without repartition) and then repartition it.
If still not work, the last option its jTag (riff box), it will repartition the whole phone.
Sorry my bad english

Hmmm, I'm not sure about that last part, but if I do it without repartition, it gets stuck at nand write of cache. Right now, it either goes into upgrade failed connect to kies sign or into download mode, both of which I'm guessing are the same

try uninstall and reInstall you samsung usb driver...
http://forum.xda-developers.com/showthread.php?t=961956
and try use other pc odin version..
try flash without repartition.

Checked. Same issue

xyancompgeek said:
Checked. Same issue
Click to expand...
Click to collapse
Odin stuck on?..
lets try flash kernel using pc odin
http://forum.xda-developers.com/showthread.php?t=1901191

Odin is stuck on this screen. Phone is in download mode. Cannot go into recovery.

You might need a usb jtag thing.maybe that will help in getting ur phone 8dentifiedby odin
Sent from my GT-N7000 using xda app-developers app

It is recognized by Odin, it just cant flash anything. One thing though, odin 3.07 atleast has the courtesy to tell me that it failed on set partition, odin 1.85 gets stuck at set partition.

what are you trying to do? you are only selecting the PIT file and nothing else in Odin. use the Original PIT not modified one with the rom file in PDA .
Nothing more is supposed to happen if only PIT file is added to odin. Donot use a custom PIT file till its confirmed a EMMC corruption.. use the original PIT file from Dr Ketans Guide in Original Dev Section

root gti 9000 with 2.3.6 help

hi hope u understand my englisch i just got a samsung galaxy s and i updated it too 2.3.6 stock, now i tried different guides too root it but all i get is bootloop please help me what too do i tried unlock root and superoneclick but wont work

looks like we both have the same problem, i allso been looking for an root method for my GT-I9000 but cant find :crying:

ekstrom79 said:
please help me what too do i tried unlock root and superoneclick but wont work
Click to expand...
Click to collapse
arazhassan said:
looks like we both have the same problem, i allso been looking for an root method for my GT-I9000 but cant find :crying:
Click to expand...
Click to collapse
visit My Android Collections, look under unlock & Root, you have the option of using an app or by using your PC or flashing a CF Root or semaphore Kernel.

try this, it worked for me.
1st:
Install or Unbrick 2.3.6 Gingerbread in Samsung Galaxy S i9000
youtube.com/watch?v=DDg4oyRNets
2nd
Root 2.3.6 Gingerbread Samsung Galaxy S i9000
youtube.com/watch?v=Pq_2Z1drKzc
and i even maked my I9000 to android 4.2.1
Install 4.2.1 Jelly Bean in Samsung Galaxy S i9000 by Cenouralm
youtube.com/watch?v=LP9EomkF06c
All worked for me

I managed to root and install CWM without using a computer, here's how I did it... I was on gingerbread 2.3.6 so I installed Framaroot v1.5.2 to get root as Mobile ODIN needs root and won't work without it. link here http://forum.xda-developers.com/showthread.php?t=2130276 then I installed Mobile ODIN (free in market) and the Mobile ODIN flash kernal here http://bit.ly/17kEetk next I download CF-Root here http://forum.xda-developers.com/showthread.php?t=788108 unzipped CF-Root and placed it in Mobile ODIN, when you open mobile ODIN it'll say you need to download extra data, but it's only if you're flashing firmware, you don't need to download the extra data just for flashing kernels so ignore it... flash it and Mobile ODIN will install CF-Root then it'll auto reboot... once rebooted, go into recovery mod and you should now have CWM as well as Root access... hope that helps.

arazhassan said:
try this, it worked for me.
1st:
Install or Unbrick 2.3.6 Gingerbread in Samsung Galaxy S i9000
youtube.com/watch?v=DDg4oyRNets
Click to expand...
Click to collapse
(1st:
1.1 Follow Cyanogen mods install wiki and download the Usb-driver(remember to reboot after) and the other stuff(no need for the android sdk). Youll have to google for heimdall-frontend
1.2 Use heimdall frontend to install 2.3.6 Gingerbread(XWJVZ_heimdall.tar for i9000) and dont freak out if mobile data is not working, it will work after step 3.)
as odin didnt recognize my soft bricked device, id stick to heimdall.
2nd:
follow cyanogenmods wiki advice and use heimdall to install cwm recovery, dont forget to visit your phones settings and put USB-debug on.
3rd:
a)
use your phone to download the rom-image +gapps you want. Boot to recovery, perform wipes and install.
or
b)
or if you want to stay with 2.3.6---> flash a working modem from recovery if its not working properly.

Soft bricked i9305, stuck on samsung logo, please help

I belive I soft bricked my i9305 when I tried to install Chainfire3D. I get stuck on the samsung logo but I can still access recovery. I did a CWM backup in Rom manager before it soft bricked but I cant access the backup from the default Recovery and I never flashed into CWM Recovery. So I wonder if I can flash CWM recovery from default recovery so I can reach my backup. Factory reset did not help, still stuck on Samsung logo. I tried flashing 2 roms but I get a error message E:Failed to verify whoe-file signature, E: signature verification failed. I can also add that I did not use Odin to root my device, I used Framaroot. I have no idea what my region number is and such so I'm not sure I can flash the stock rom ether.
Any kind of help is appreciated.

Fragda said:
I belive I soft bricked my i9305 when I tried to install Chainfire3D. I get stuck on the samsung logo but I can still access recovery. I did a CWM backup in Rom manager before it soft bricked but I cant access the backup from the default Recovery and I never flashed into CWM Recovery. So I wonder if I can flash CWM recovery from default recovery so I can reach my backup. Factory reset did not help, still stuck on Samsung logo. I tried flashing 2 roms but I get a error message E:Failed to verify whoe-file signature, E: signature verification failed. I can also add that I did not use Odin to root my device, I used Framaroot. I have no idea what my region number is and such so I'm not sure I can flash the stock rom ether.
Any kind of help is appreciated.
Click to expand...
Click to collapse
You can not flash a custom rom or a custom recovery from the default recovery, use odin to flash clockworkmod recovery.
http://forum.xda-developers.com/showpost.php?p=37260965&postcount=1

Also wrong forum. This is the i9300 Q&A not i9305 Q&A
You can use the report button in the top right of your post /!\ to move it to the right location, which is here: http://forum.xda-developers.com/forumdisplay.php?f=1822

crisnar said:
You can not flash a custom rom or a custom recovery from the default recovery, use odin to flash clockworkmod recovery.
http://forum.xda-developers.com/showpost.php?p=37260965&postcount=1
Click to expand...
Click to collapse
Ok but the problem is that I cannot enter download mode because I did not root with Odin. So I cannot connect my phone to odin yet. Any idea?

Fragda said:
Ok but the problem is that I cannot enter download mode because I did not root with Odin. So I cannot connect my phone to odin yet. Any idea?
Click to expand...
Click to collapse
A good idea would be for you to read the basic faqs and guides first .
ODIN and Root have nothing at all to do with entering download mode .
No download mode means you require a service centre repair .
jje

I can not enter adb shell ether because I never had the chance to enable usb debugging. Is service center really the only way? I can still install files from default recovery.

yes. sadly service center is the only option you have now
Sent from my GT-I9300 using XDA Premium 4 mobile app

crisnar said:
You can not flash a custom rom or a custom recovery from the default recovery, use odin to flash clockworkmod recovery.
http://forum.xda-developers.com/showpost.php?p=37260965&postcount=1
Click to expand...
Click to collapse
You were totally right! Now CWM recovery works.
JJEgan said:
A good idea would be for you to read the basic faqs and guides first .
ODIN and Root have nothing at all to do with entering download mode .
No download mode means you require a service centre repair .
jje
Click to expand...
Click to collapse
I finaly made it work, now I can acess odin and Download mode.
However I still dont know due to the fact that none of my roms I try to install with CWM Recovery works (error 7) I got a GT-I9305N so I'm still stuck, thinking about flashing the stock rom I downloaded from sammobile through odin although I'm not sure how.
Thanks so far guys.

Flash stock and get the phone working .
jje

Fragda said:
You were totally right! Now CWM recovery works.
I finaly made it work, now I can acess odin and Download mode.
However I still dont know due to the fact that none of my roms I try to install with CWM Recovery works (error 7) I got a GT-I9305N so I'm still stuck, thinking about flashing the stock rom I downloaded from sammobile through odin although I'm not sure how.
Thanks so far guys.
Click to expand...
Click to collapse
Give me the link to the rom you want flash. The backup you have made not work?

I finaly got everything to work!
I flashed stock rom that I downloaded from sammobile through odin. I want to thank you guys so much for helping me out, it wasn't a easy road. Chainfire 3D ruined everything for me but I should have been more careful with installing that. Hopefully I can find something better to make the textures not all white in HD games but thats a different story.
Thanks again everyone!

I NEED HELP! Im a noob, i have a samsung S3 GT-i9305 ( GT-I9305GSMH) And i have soft bricked it by flashing a PDA that was meant for only i9300 - i then tried recovring it by doing alot of stuff but it wont work ... does anyone have any idea on how to fix this problem ? please .... btw i was using odin to root my phone but the cu*t fukced me over.... help anyone.. im stuck in downloading mode please do not remove target..