Database Develop

[MOD] Fascinate and Epic 4G lock screens

I ported the Fascinate and Epic 4g lock screens to the Vibrant, killed
the battery full popup, and installs the MobileAP mod.
this mod is for the stock UVJFD firmware!!!
and close to stock deodex ROM's
the mod replaces the following files
android.policy.odex/.jar
framework-res.apk
services.odex/.jar
Settings.apk
your battery icon mods will disappear because of the framework-res.apk
replacement.
FIX for MobileAP:
http://forum.xda-developers.com/showpost.php?p=8443114&postcount=43
.

very nice....I'll have to try it out when my phone finishes charging

flash thru recovery?

Think you can possibly make one for JI2-5 roms?

Use clockwork, dont forget to backup.
Sent from my SGH-T959 using XDA App

Nice work.

Ok just so I know, my phone says my baseband version is T959UVJ12 with kernel version 2.6.29. I did not flash any roms but I did update the modem and GPS files from the J12 rom....can I still use this even if it requires the JFD rom?

I already had the earlier version of this mod and you keep out-doing yourself! Thank you untermensch!

Great mod. Thanks.

Hey would you be up to helping me import this into the i9000 JH2 build?
Let me know, I can send you the de-odexed versions of the files.
Thanks

kponti said:
Ok just so I know, my phone says my baseband version is T959UVJ12 with kernel version 2.6.29. I did not flash any roms but I did update the modem and GPS files from the J12 rom....can I still use this even if it requires the JFD rom?
Click to expand...
Click to collapse
You should be fine to use this mod with that setup, the incompatibility only rears its head when running full JI2/JI4/JI5 roms, since at the very least, framework-res.apk, android.policy.jar, and services.jar were updated/modified in those roms.
cheers

Nice, modified it with the files from the blue circle battery mod, and it's working good so far
... now I just need to implement the kill for the battery status full message.
*EDIT* Crap!, the battery charging animation doesn't work *EDIT*

Damn, I did a full JI2 flash to my phone so I can't flash this. I was looking forward to flashing it, oh well

untermensch is my hero!

Getting a text message while the Epic lock screen was set caused me to bootloop.
Pretty pissed.
EDIT: running fine now. Probably not the mod's fault. Who knows.

negativedrew said:
Getting a text message while the Epic lock screen was set caused me to bootloop.
Pretty pissed.
Click to expand...
Click to collapse
This sounds like a serious issue, can someone provide an update.zip to reverse this?
EDIT: Can someone confirm this is actually an issue or the user that reported it just be trolling?

It's days like today that I am so thankful ODIN exists.

I just got a text and did not have any issues, can you give me
more info to recreate the issue.

untermensch said:
I just got a text and did not have any issues, can you give me
more info to recreate the issue.
Click to expand...
Click to collapse
Likewise, I played with this earlier today and had no FC issues when receiving texts using any lockscreen.
Just to double check, try clearing your cache and dalvik-cache, and to triple-check, you are running a JFD based rom, right?
This won't work on any of the leaked JIX series rom's, including the new Bionix 1.5. It also likely won't work on any of Eugene's hybrid of franken-twiz series rom's.
Cheers

yep, running JFD. didn't see it happen, just know that I heard a text come in, and then when I went to check it a couple minutes later, it was already bootlooping.
I have notifications from the stock messaging app turned off as I use chomp. Do you think that could be the issue? (I see you have the stock messaging app in your screenshot)
Also, I went back looking for the old zip with the Glass/Androind/Fascinate lockscreens and saw you'd taken it down. Is that one still available anywhere?

[Q] Flash to XWJVB from official 2.3.3.XXJVO?

Hey new member here,
I was wondering if someone could help me as I am ultimately (hopefully)trying to put Touchwiz 4.0 on my sgs.
I stumbled upon this guide http://forum.xda-developers.com/showthread.php?t=1058164 from a responding poster, but rather than risking following it and possibly bricking my phone, can anyone tell me if its possible to do this if my version is already 2.3.3 and xxjvo? So basically can you put a ROM on your phone that is also 2.3.3/current firmware but a different X.J..?
I have been through the process of rooting my current version(successfully) and also I tried to manually deodex it too but get stuck using the cmd commands in the instructions in this guide: http://androidforums.com/droid-x-all-things-root/158274-how-manually-deodex-your-phone.html e.g. I get "permission denied"...
Finally, considering my ultimate aim is to put touchwiz 4.0 on my handset, if there is an easier way to customise my current version 2.3.3. XXJVO i.e. a good ROM I could use compatible with my version that can use an available TW 4.O or any other good features this would be useful. idk, I think I don't really understand what is compatible with what and what ROMs etc I can use...
I am kinda new to this whole flashing, rooting stuff so please be patient with me...any help is very much appreciated!

highaimer said:
Hey new member here,
I was wondering if someone could help me as I am ultimately (hopefully)trying to put Touchwiz 4.0 on my sgs.
I stumbled upon this guide http://forum.xda-developers.com/showthread.php?t=1058164 from a responding poster, but rather than risking following it and possibly bricking my phone, can anyone tell me if its possible to do this if my version is already 2.3.3 and xxjvo? So basically can you put a ROM on your phone that is also 2.3.3/current firmware but a different X.J..?
I have been through the process of rooting my current version(successfully) and also I tried to manually deodex it too but get stuck using the cmd commands in the instructions in this guide: http://androidforums.com/droid-x-all-things-root/158274-how-manually-deodex-your-phone.html e.g. I get "permission denied"...
Finally, considering my ultimate aim is to put touchwiz 4.0 on my handset, if there is an easier way to customise my current version 2.3.3. XXJVO i.e. a good ROM I could use compatible with my version that can use an available TW 4.O or any other good features this would be useful. idk, I think I don't really understand what is compatible with what and what ROMs etc I can use...
I am kinda new to this whole flashing, rooting stuff so please be patient with me...any help is very much appreciated!
Click to expand...
Click to collapse
We're all new at some point mate
Yes you can revert to an older version, you could even go back to eclair if you wanted.
If your looking for TW 4 I would recommend Tweaky ROM 4.1 It has TW 4 and still has a stock feel. Its the most stable TW4 I have used.
If you already have Clockwork recovery you dont need to flash JVH or a custom kernal
Link for ROM http://forum.xda-developers.com/showthread.php?t=1059561
Link for demo and install vids by me http://www.youtube.com/user/sgsromreviews?feature=mhum

beerdaddy said:
We're all new at some point mate
Yes you can revert to an older version, you could even go back to eclair if you wanted.
If your looking for TW 4 I would recommend Tweaky ROM 4.1 It has TW 4 and still has a stock feel. Its the most stable TW4 I have used.
If you already have Clockwork recovery you dont need to flash JVH or a custom kernal.
Link for ROM http://forum.xda-developers.com/showthread.php?t=1059561
Link for demo and install vids by me http://www.youtube.com/user/sgsromreviews?feature=mhum
Click to expand...
Click to collapse
Thanks for your response mate
I will defo have a look at this and i've got clockwork installed so I will follow your vids. Hopefully, it will work for me.
oh yeah, I'm stuck on manually deodexing stage but does my phone need to be deodexed to follow your vid? Is it ok if it is only rooted with CWM?
Thanks again

highaimer said:
Thanks for your response mate
I will defo have a look at this and i've got clockwork installed so I will follow your vids. Hopefully, it will work for me.
oh yeah, I'm stuck on manually deodexing stage but does my phone need to be deodexed to follow your vid? Is it ok if it is only rooted with CWM?
Thanks again
Click to expand...
Click to collapse
No problem mate. You dont need a deodexed ROM so long as you are on at least JVH and have clockwork.
Tweaky is pre rooted and deodexed If you like his work be sure to click the thanks button on his thread

beerdaddy said:
No problem mate. You dont need a deodexed ROM so long as you are on at least JVH and have clockwork.
Tweaky is pre rooted and deodexed If you like his work be sure to click the thanks button on his thread
Click to expand...
Click to collapse
Thanks again beerdaddy,
when you say "at least JVH" what exactly do you mean? does that have anything to do with my firmware version 2.3.3 or the XXJVO stuff? I kept reading other posts for a solution before posting and all the JVB, JVH and JVO talk confuses me.
Also are JVO and JVH incompatible/compatible or two different things altogether?

highaimer said:
Thanks again beerdaddy,
when you say "at least JVH" what exactly do you mean? does that have anything to do with my firmware version 2.3.3 or the XXJVO stuff? I kept reading other posts for a solution before posting and all the JVB, JVH and JVO talk confuses me.
Also are JVO and JVH incompatible/compatible or two different things altogether?
Click to expand...
Click to collapse
No probs
The JV1/K/B/H/O are all gingerbread firmwares but different releases. Your on JVO and that is the latest international version so your absolutely fine to flash from this.

beerdaddy said:
No probs
The JV1/K/B/H/O are all gingerbread firmwares but different releases. Your on JVO and that is the latest international version so your absolutely fine to flash from this.
Click to expand...
Click to collapse
Hey beerdaddy,
Thanks for the info yesterday. I managed to put the ROM on successfully . However, i have encountered a couple problems and the only thing i installed was Tweaky_ROM_v4.1_No_Wipe.zip.
Since you have used this before do you know how to fix two things that have FC on me:
the email app and swype
Swype lets you draw a line but makes a sound when you complete a word and the word does not appear in the text box. The email app just has a blank screen then FC. Also, are there any other common problems i should also know about too?
In this version I no longer have CWM there so how do i reboot into recovery etc? How will i apply any suggested fixes. Thanks in advance
Edit: i found cwm when pressing power and selecting recovery that put me into cwm recovery albeit an older version than what i had before e.g. Power button is used for select not middle button.

highaimer said:
Hey beerdaddy,
Thanks for the info yesterday. I managed to put the ROM on successfully . However, i have encountered a couple problems and the only thing i installed was Tweaky_ROM_v4.1_No_Wipe.zip.
Since you have used this before do you know how to fix two things that have FC on me:
the email app and swype
Swype lets you draw a line but makes a sound when you complete a word and the word does not appear in the text box. The email app just has a blank screen then FC. Also, are there any other common problems i should also know about too?
In this version I no longer have CWM there so how do i reboot into recovery etc? How will i apply any suggested fixes. Thanks in advance
Edit: i found cwm when pressing power and selecting recovery that put me into cwm recovery albeit an older version than what i had before e.g. Power button is used for select not middle button.
Click to expand...
Click to collapse
No worries mate
I haven't heard about the email app or experienced a problem with the email app so not so sure about that. Did you wipe Dalvik cache? If not try that.
Swype has a fix, you can find details on how to fix on the first page of Tweaky ROM thread under the tips and other things section
Edit: You can get in to recovery using the extended power menu or the three button combo (vol up + home + power key together)
Edit 2: You should wipe data for email app too from the manage app section in settings

beerdaddy said:
No worries mate
I haven't heard about the email app or experienced a problem with the email app so not so sure about that. Did you wipe Dalvik cache? If not try that.
Swype has a fix, you can find details on how to fix on the first page of Tweaky ROM thread under the tips and other things section
Edit: You can get in to recovery using the extended power menu or the three button combo (vol up + home + power key together)
Edit 2: You should wipe data for email app too from the manage app section in settings
Click to expand...
Click to collapse
Thanks for being such a big help
Both issues are fixed now and it is quite perfect except for the odd widget acting up but I don't use them. I think i'll just have a look round for other slight tweaks just to spruce it up a bit and i'm good. Any suggestions of good additional tweaks to this that work with my version? If not, thanks again. you made this a very easy process along with the help of Tweaky

highaimer said:
Thanks for being such a big help
Both issues are fixed now and it is quite perfect except for the odd widget acting up but I don't use them. I think i'll just have a look round for other slight tweaks just to spruce it up a bit and i'm good. Any suggestions of good additional tweaks to this that work with my version? If not, thanks again. you made this a very easy process along with the help of Tweaky
Click to expand...
Click to collapse
No problem
Not so much a tweak but I would recommend Voodoo Control Plus app of the market. Makes it easier and clearer managing the ext4 lagfix and unlocks some amazing power from the amp giving you great sound quality.
The 7 lockscreen add on is good too which is found on the Tweaky thread, gives you SGSII lock screen plus the usual lot
EDIT: Which widgets aren't working?

K. I'm giving that voodoo control a go and have dl 7 lockscreen. I'm assuming you install it through cwm the same way as every other .zip file?
The widget that doesn't work properly is the "days" widget. I don't use it so its not really a problem. However, if you put it on one of your panels and try to click it it FC's the TW launcher and goes into the phone app. This means you have to choose a launcher again but I guess this would only really apply to someone who uses it; I was just checking out what the days widget was and how the diff widgets looked. cheers

Yeah just the usual installation via cwm. Never tried that widget....you can use another app called Nitrality to remove system apps and widgets you don't want/need

beerdaddy said:
No problem
Not so much a tweak but I would recommend Voodoo Control Plus app of the market. Makes it easier and clearer managing the ext4 lagfix and unlocks some amazing power from the amp giving you great sound quality.
The 7 lockscreen add on is good too which is found on the Tweaky thread, gives you SGSII lock screen plus the usual lot
EDIT: Which widgets aren't working?
Click to expand...
Click to collapse
I will defo give voodoo control a go and about to install the 7 lockscreen too. I'm assuming you install it through cwm like any other zip file?
There are two widgets that seem to not be working one is the "power control" widget which appears but with out any actual power controls(basically just a blank screen) and the "days" widget where you can place it on a panel but when you click to edit it it FC's the TW launcher and puts you in the phone app
I don't use them though but found this out because I wanted to see how all the panels/widgets looked.
btw does the SGS2 lockscreen work like in some video I saw where you get your missed messages etc on it and sliding across takes you straight to the msg app?
EDIT: This is kind of a repost because I came back to edit my original reply but it wasn't there for some reason; hence this reply.

Yeah the lockscreen has the text and call slides
Edit: The power control widget will work, you need to stick on to a home screen and then reboot your phone. I personally use the extended power control widget of the market tho

will probably get that one from the market. Thanks for all your help on this. I feel thoroughly welcomed! Cheers
Sent from my GT-I9000 using XDA Premium App

Again no problem mate, I'm always doing new vids for different ROMs, I'm a serial flasher So would suggest checking the YouTube channel out from time to time or the web site which has reviews.
Sent from my Galaxy S running Tweaky AOSP

Illuminance QandA

All things being discussed regarding Illuminance ROM
To view the rom, click here>
​
This is not an option! While in this thread respect one another and be helpful to those w/ questions

Thanks tomween1.
Request to Mods: Can you please make it sticky like other Q&A threads..

Thanks goes to Forum Moderator reinbeau for making this a Sticky thread.

Didn't know Reinbeau was a moderator. Thanks!
Great idea, Tom, sometimes people go a little off topic in the development section, asking about very general stuff. Nice to have a more general thread and a more technical thread. ('course now I have another subscription to watch )

RTBee said:
Didn't know Reinbeau was a moderator. Thanks!
Great idea, Tom, sometimes people go a little off topic in the development section, asking about very general stuff. Nice to have a more general thread and a more technical thread. ('course now I have another subscription to watch )
Click to expand...
Click to collapse
Thanks man, "now I have another subscription to watch" I knwo what you mean.
Hopefully we'll also get some kind of a understanding of IlluminatedOnes direction.... I1.2 or A11 or dare I say it...BOTH

tomween1 said:
Thanks man, "now I have another subscription to watch" I knwo what you mean.
Hopefully we'll also get some kind of a understanding of IlluminatedOnes direction.... I1.2 or A11 or dare I say it...BOTH
Click to expand...
Click to collapse
Well, Watsa was doing both. Both sides of the fence, if you will. Just that many more happy campers!

I just have to say....thank you thank you thank you.
This ROM is what the Captivate should have been the entire time. It took me awhile to get up to 2.3.5 with GB bootloaders and figure out how to flash it, but all of the info is there one the forums.
The SGS II email app alone made it worth it for me since I can now have my phone on WiFi and get my EAS email with zero problems. The stock 2.3.5 email app was still buggy for Exchange when WiFi was on and this fixed everything.
One question I have though. Can I pretty safely install each iteration of the Illuminance ROM over top of an older one? That is the only thing I was unable to find on the forums. I took the chance and installed 1.1 over top of 1.0.1 and have had no problems. I am just curious as to what is recommended.
Thank you again!

Anyone can make a non-transparent scroll down status(look like stock) for Illuminance v1.1 ROM?
The transparent one might get lag sometime... I am not sure why...?

First... Let me say that I am loving this ROM so far. I have not really been happy with any of the GB ROMS (Paragon RC6 on Froyo was my fav). Anyways, for some reason after flashing this ROM (coming from Obsession with Talon Kernel) I cannot get to me ext_sd card through CWM. From what I understand the CWM thing is part of the Kernel, so I downloaded the latest Samari 1.2 Kernel and flashed that. Still the same problem. Downloaded the Boog KJ3 Kernel and still the same problem. Any ideas what would cause this???
For the record my method for getting around not being able to access the external sd card is to put the files in the phone storage and flash from there.

TW4 for Illuminance
Anyway TW4 can be ported to Illuminance.

Hadrien9 said:
I just have to say....thank you thank you thank you.
This ROM is what the Captivate should have been the entire time. It took me awhile to get up to 2.3.5 with GB bootloaders and figure out how to flash it, but all of the info is there one the forums.
The SGS II email app alone made it worth it for me since I can now have my phone on WiFi and get my EAS email with zero problems. The stock 2.3.5 email app was still buggy for Exchange when WiFi was on and this fixed everything.
One question I have though. Can I pretty safely install each iteration of the Illuminance ROM over top of an older one? That is the only thing I was unable to find on the forums. I took the chance and installed 1.1 over top of 1.0.1 and have had no problems. I am just curious as to what is recommended.
Thank you again!
Click to expand...
Click to collapse
To answer your question, yes. You can safely install each iteration of this ROM over or on top of an older one. Right now, each is a full wipe version, meaning you'll have to redo all apps and stuff, but in the future IlluminatedOne said he'd be doing upgrade versions. We'll have to wait and see. Either way it's well worth any effort. This is a great ROM
lfaulkner29 said:
First... Let me say that I am loving this ROM so far. I have not really been happy with any of the GB ROMS (Paragon RC6 on Froyo was my fav). Anyways, for some reason after flashing this ROM (coming from Obsession with Talon Kernel) I cannot get to me ext_sd card through CWM. From what I understand the CWM thing is part of the Kernel, so I downloaded the latest Samari 1.2 Kernel and flashed that. Still the same problem. Downloaded the Boog KJ3 Kernel and still the same problem. Any ideas what would cause this???
For the record my method for getting around not being able to access the external sd card is to put the files in the phone storage and flash from there.
Click to expand...
Click to collapse
Just for clarification... the internal 16GB sd card is called /sdcard. And the external sd card is found in the /sdcard folder and is called /external_sd. So is it the internal or external sd card that you're talking about?
Also when flashing anything CWM only allows you to go thru the sdcard (internal one), it says something like, 'install zip from sdcard', it will display the folder for your external sd card but won't let you install from there. That's why everything needs to be on the internal sd card before you try to install it. Hope this helps.

I got FC when I tried to use MiniPaper widget for the first time. And now when I try to open it, it won't open and I can't write anything. Only thing I can do is drag it and delete it. Any idea why?

henrysmails said:
Anyway TW4 can be ported to Illuminance.
Click to expand...
Click to collapse
I get the impression that TW4 doesn't work all that well with GB. For some it works better than others and that's why a lot of DEVs have switched back to TW3, much more stable and no FC's. If you want same look with more options you might try GoLauncher Ex with the TW theme.

tomween1 said:
Hopefully we'll also get some kind of a understanding of IlluminatedOnes direction.... I1.2 or A11 or dare I say it...BOTH
Click to expand...
Click to collapse
I got more (twice ) reasons to do both.. Though Apex 11 is a team effort and I'm just a small part.
Hadrien9 said:
I just have to say....thank you thank you thank you.
This ROM is what the Captivate should have been the entire time. It took me awhile to get up to 2.3.5 with GB bootloaders and figure out how to flash it, but all of the info is there one the forums.
The SGS II email app alone made it worth it for me since I can now have my phone on WiFi and get my EAS email with zero problems. The stock 2.3.5 email app was still buggy for Exchange when WiFi was on and this fixed everything.
One question I have though. Can I pretty safely install each iteration of the Illuminance ROM over top of an older one? That is the only thing I was unable to find on the forums. I took the chance and installed 1.1 over top of 1.0.1 and have had no problems. I am just curious as to what is recommended.
Thank you again!
Click to expand...
Click to collapse
Like RT said, it will work.
Fate-Silver said:
Anyone can make a non-transparent scroll down status(look like stock) for Illuminance v1.1 ROM?
The transparent one might get lag sometime... I am not sure why...?
Click to expand...
Click to collapse
There is no way a transparent image can cause lag. All PNGs are optimized.
lfaulkner29 said:
First... Let me say that I am loving this ROM so far. I have not really been happy with any of the GB ROMS (Paragon RC6 on Froyo was my fav). Anyways, for some reason after flashing this ROM (coming from Obsession with Talon Kernel) I cannot get to me ext_sd card through CWM. From what I understand the CWM thing is part of the Kernel, so I downloaded the latest Samari 1.2 Kernel and flashed that. Still the same problem. Downloaded the Boog KJ3 Kernel and still the same problem. Any ideas what would cause this???
For the record my method for getting around not being able to access the external sd card is to put the files in the phone storage and flash from there.
Click to expand...
Click to collapse
Can anyone else confirm this? I dont have external sdcard so can not test it.
henrysmails said:
Anyway TW4 can be ported to Illuminance.
Click to expand...
Click to collapse
I will not work on porting TW4, instead I will try to enhance TW3 included. If you want to try, you can try TW4 from Apex 10 thread. Better, try TW3 from Pinnacle for better appearance and a few functionaries from TW4.
eNemy- said:
I got FC when I tried to use MiniPaper widget for the first time. And now when I try to open it, it won't open and I can't write anything. Only thing I can do is drag it and delete it. Any idea why?
Click to expand...
Click to collapse
Was working for me. Any one else faced this problem? Try clearing data for this app and reboot your phone. Check if that helps.

IlluminatedOne said:
Can anyone else confirm this? I dont have external sdcard so can not test it.
Click to expand...
Click to collapse
Yes, same here. As I mentioned earlier, CWM will show the folder with the external sdcard but when you choose it, it just drops back to current internal sd card directory. I've never tried to install anything from my external card from this or any other rom/kernel, but I didn't think you could ever install from an external card. Always had to put it in root directory or at least a folder on the internal sdcard.

IlluminatedOne said:
Was working for me. Any one else faced this problem? Try clearing data for this app and reboot your phone. Check if that helps.
Click to expand...
Click to collapse
Did what you told and seems okay now. Thanks
One more question. There was lockscreen wallpaper in stock KJ3?
What happened to that

eNemy- said:
Did what you told and seems okay now. Thanks
One more question. There was lockscreen wallpaper in stock KJ3?
What happened to that
Click to expand...
Click to collapse
Its still there....but I get settings FC when I try to select wallpaper for Lockscreen going through Display settings>> wallpapers >>Lockscreen>> Gallery....

viny2cool said:
Its still there....but I get settings FC when I try to select wallpaper for Lockscreen going through Display settings>> wallpapers >>Lockscreen>> Gallery....
Click to expand...
Click to collapse
In stock when you select a photo and set as wallpaper you can choose as lockscreen or homescreen. I couldn't see that in Illu so...
And when i try from display settings and i get FC too.

Email
Maybe a silly question, not even sure if it belongs here or general Q&A, but can't seem to find answer. In the Notification bar when I get an email, clicking on the pulldown and email, brings up the GMail view of my gmail account. There is also the stock GB email app, which I found I like the view much better. Is there any way to get the stock email view to come up when going thru the notification bar? Or would I have to delete my gmail app?
I apoligize if this is not really ROM related. But I trust you guys

RTBee said:
Maybe a silly question, not even sure if it belongs here or general Q&A, but can't seem to find answer. In the Notification bar when I get an email, clicking on the pulldown and email, brings up the GMail view of my gmail account. There is also the stock GB email app, which I found I like the view much better. Is there any way to get the stock email view to come up when going thru the notification bar? Or would I have to delete my gmail app?
I apoligize if this is not really ROM related. But I trust you guys
Click to expand...
Click to collapse
I dont use email app and i dont know if this will help at all or not. But if you are reffering to showing the subject of the message as the view, then you can go to settings>> labels to notify and uncheck Notify once

[MOD] bLED button LED notification for Galaxy Note

Update 14/12/2011
Watch it in action here http://www.youtube.com/watch?v=OojU0REhrL0.
Update 13/12/2011
bLED kernel module updated to 0.2. Should fix the random crash occuring. Not sure how many of you guys checked the dmesg and found out plenty of stack traces on 0.1
Grab your copy bled-0.2-lkm-update.zip and flash with Clockworkmod. Leave the bled-0.1.apk installed as is, no update is available for that yet
Original post
bLED touchkey button notification for GALAXY Note, version 0.1-EA
The wait is over.
Introducing bLED, my version of blinking notification through touchkey button LEDs. It's still on its early access version 0.1, and there are still some known inconveniences or bugs. Please refer to the known problems section for more info.
After applying the patch and installing the apk, your GALAXY Note will blink any notification found on the status bar, including missed calls and (TouchWiz) SMS
This MOD has been tested on KKA kernel, but it should support all stock kernels (seems like none of custom kernels are supported). But if anything happens, you can restore with the nandroid backup of (just) your system image.
eybee1970 said:
ok, unfortunatly this Mod works with none of newer FM- and Abyss-Kernels....so we have to wait for the devs implementing stock touchkey drivers.
For all ROCKET ROM Users: of course you can switch to any CF-Root Kernel and this Mod will work - but you'll lose important init.d-tweaks if you do so, cause none of chainfires kernels support init.d-scripting
Click to expand...
Click to collapse
I could be wrong, it could possibly be another issue rather than stock touchkey driver.
angelom said:
I entered the stock touchkey drivers but bled still does not work.
At this point I do not think it's a driver issue.
And then FM 1.4 does not have the modified drivers
Click to expand...
Click to collapse
Prerequisites
- You'll need a clockworkmod-enabled GALAXY Note. Some advanced users can also load the kernel module by him/herselves.
Installation
0) Do nandroid backups!
Will not held responsible for bricking your phone if you don't backup first
1) Install the MOD
1.a) Download the update.zip (updated to bled-0.2-lkm-update.zip) and copy over to your SD card
1.b) Reboot in CWM to flash the update.zip. Go to "install zip from sdcard", "choose zip from sdcard", navigate and select the bled-0.2-lkm-update.zip.
1.c) Power off the phone, and start it again (obviously)
2) Install the bLED accessibility service
2.a) Go to "Settings", "Applications". Tick on "Unknown Sources" option.
2.b) Download bled-0.1.apk and install it on your phone. Don't look for it afterwards on your drawer menu as it does not contain real Activity-based application.
2.c) Go to "Settings", "Accessibility". Tick "Accessibility" and "bLED". Just ignore the warning when ticking "bLED", as I'm not interested on your personal details
Lock your phone. Have missed calls, SMSes, Whatsapp messages, GMail, whatever. They're all going to be blinked by bLED
Known issue
- Duration of blinking is currently limited to 15 minutes
- There will be several seconds of delay before it will blink sms and missed calls. It happens due to the currenlty implemented notification logic. More of a workaround instead of elegant solution. Hope will have better logic for next releases on handling them.
- There are still some mutex locking bugs on KKA kernel. Very ironic, there seems to be some struggle to support PMIC on the currently best SoC in the world, by looking at the kernel codes.
Enjoy

apk link dosen't work!

Let´s try it out

yeahhhh....great man!!!

madguylb said:
apk link dosen't work!
Click to expand...
Click to collapse
Anyone with apk link problem as well?
Sent from my GT-N7000 using Tapatalk

watch_mania said:
Anyone with apk link problem as well?
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
no, works...
Did you discover any negative side effects on e.g. battery life?

eybee1970 said:
no, works...
Did you discover any negative side effects on e.g. battery life?
Click to expand...
Click to collapse
Well I just got the kernel module working by last night and the accessibility service earlier today. Not enough time to tell yet
Will try blinking it tonight and see how much battery it would drain
But you can always disable the bLED accessibility service when you don't need it
Sent from my GT-N7000 using Tapatalk

THANK YOU MAN !
This was such an anoying point that made me not love my Note !
Please keep developing, you are doing great work for all Note Users !
I hope MIUI and Cyanogen will make a Note-Port soon and integrate your LED Notification MOD

Hi guys I've installed but doesn't seem to be working I'm on rocket ROM and antes kernel and using go SMS can anyone help

brockyneo said:
Hi guys I've installed but doesn't seem to be working I'm on rocket ROM and antes kernel and using go SMS can anyone help
Click to expand...
Click to collapse
try switching to latest Abyss Kernel 2.0

eybee1970 said:
try switching to latest Abyss Kernel 2.0
Click to expand...
Click to collapse
Hi sorry I should of said I'm already on the abyss 2.0

reset
After installing everything looked ok in 5 minutes there was reset the phone :-(.
But otherwise good

Main concern:
How is the power management on this ?

PATLEN said:
After installing everything looked ok in 5 minutes there was reset the phone :-(.
But otherwise good
Click to expand...
Click to collapse
Which kernel and version are you using? Yes there circumstances where the mutex crashes the system. It happened once on my KKA, but never afterwards. I think I have to consider some other ways for doing semaphores for bLED

brockyneo said:
Hi sorry I should of said I'm already on the abyss 2.0
Click to expand...
Click to collapse
Ok the Abyss kernel had BLN mod patched on the melfas touchkey driver. You needs kernels with stock melfas touchkey driver, left intact. Seems that BLN is not functional yet on the Abyss kernel anyway? Maybe you can ask him to revert to original melfas touchkey driver from Samsung

i use this kernel
http://forum.xda-developers.com/showthread.php?t=1331784
directly:
http://forum.xda-developers.com/attachment.php?attachmentid=791221&d=1321958928

PATLEN said:
i use this kernel
http://forum.xda-developers.com/showthread.php?t=1331784
directly:
http://forum.xda-developers.com/attachment.php?attachmentid=791221&d=1321958928
Click to expand...
Click to collapse
That one is stock ones right? Then I believe it should work. But please post the results here

waste of time. It does not work!

ok, unfortunatly this Mod works with none of newer FM- and Abyss-Kernels....so we have to wait for the devs implementing stock touchkey drivers.
For all ROCKET ROM Users: of course you can switch to any CF-Root Kernel and this Mod will work - but you'll lose important init.d-tweaks if you do so, cause none of chainfires kernels support init.d-scripting

vuhongduong said:
waste of time. It does not work!
Click to expand...
Click to collapse
Well at least I wasted much more time than you did! But guess what, it worked on mine

[Mod][4.1.2] AOSP Locksceen Toggle for TW Roms

I made an AOSP Lockscreen Toggle Made for the Note II and ported it over to the Note 10.1.
Let me know how it goes for you and I will try to work out any bugs and any mods I make for the Note II I will try to add to this as well if possible.
You need to flash both files for it to work. and don't forget to Backup.

Reserved

Works
It works, I just wish that we can edit function on the lock Screen, instead of being confined to unlock, Camera, and google .
a. addition to Our great device anyway ,
Thank you very much

screenshot ?

http://forum.xda-developers.com/showthread.php?t=2059567

Once I perform a nandroid, I will flash these

After testing this for awhile on Resurrection Rom, I can say that it freezes my tablet 40% of the time, so I disable it. I use HOLO lock screen now to mimic AOSP lock screen.

Not working on Dr. Akrim's v8 rom (4.1.2)
Still get the water effect after flashing both these files in recovery.
Guess this was not for 4.1.2, right?
Thanks anyway
EDIT:.....hmm, the OP does say it's for 4.1.2 - well, I could not get it to work in Dr. Akrim's v8 ROM

bert269 said:
Still get the water effect after flashing both these files in recovery.
Guess this was not for 4.1.2, right?
Thanks anyway
EDIT:.....hmm, the OP does say it's for 4.1.2 - well, I could not get it to work in Dr. Akrim's v8 ROM
Click to expand...
Click to collapse
You have to go into your system settings and enable it, it should be under lock screen options.

Thanks for this I hope to see some new moods here like this one thank you:thumbup:
Sent from my GT-N8013 using Tapatalk HD

Thank you
Sent from my GT-N8013 using Xparent Purple Tapatalk 2

I flashed this running on N8013-UEUCMA3-ARCMA3-XAR-deodexed ROM
After I flashed it, I'm getting some weird things like
Manage Accounts have "Push Subscriptions" instead of Gmail syncing
When changing fonts its says "More Fonts" for setting the fonts
I'm curious if anyone else is experiencing this issue
is there a certain order that these zips need to be flashed in? Do I have to reboot after each flash or can I flash both at the same time?
I really like this MOD, seems I don't know how to acurately unlock using the stock unlock method haha
EDIT:
Wiped, clean flashed the rom, checked and everything was good
Flashed the AOSP Lockscreen MOD and everything I mented before was broken
I also have this MOD installed N8013UEUCMA3-UnlimitedAppsMod just to let you know
Thank you in advance for letting me know if this is a me problem or a bug with this mod...

Any chance of getting this ported for XXCMC5?

Unlocking is not working. Im on ARHD rom. Weird.