Database Develop

Want to update ics

Yes i want to update to ICS. I have previously tried but ended in bootloop.
My current configuration is.
Firmware: 2.3.5
Baseband 19000XXJVT
Kernel: 2.6.35.7-19000XXJVT-CL617736
[email protected] #Semaphore_1.9.1bm
Can i just go into CWM and install

It depends which ICS Rom you want to use, theres Team Hacksung's ICS Port or One Cosmic's, imo TeamHacksungs one is the better choice, its easier to flash and to me, its slightly faster and more things in the Rom are working, if you want to flash team HackSung's one then just create a backup and flash over your current Rom if you want to use One Cosmics port, then you need to flash it over a Cyanogen Mod base Rom, simply flash a CM7 Rom, factory wipe, then flash the ICS Rom over it
(Be sure to hit the thanks button below the message if i helped)

samy.3660 said:
Yes i want to update to ICS. I have previously tried but ended in bootloop.
My current configuration is.
Firmware: 2.3.5
Baseband 19000XXJVT
Kernel: 2.6.35.7-19000XXJVT-CL617736
[email protected] #Semaphore_1.9.1bm
Can i just go into CWM and install
Click to expand...
Click to collapse
in my expirience onecosmics is better, pure speed, no FCs great battery life and almost everything works.
http://forum.xda-developers.com/showthread.php?t=1398223

kiantrel said:
in my expirience onecosmics is better, pure speed, no FCs great battery life and almost everything works.
http://forum.xda-developers.com/showthread.php?t=1398223
Click to expand...
Click to collapse
+1
Though I can't say much about battery life.. still to test it properly....

i installed Onecosmic's ICS Port Android 4.0.3 RC1 but wi-fi doesn't seem to work any suggestion?

samy.3660 said:
Yes i want to update to ICS. I have previously tried but ended in bootloop.
My current configuration is.
Firmware: 2.3.5
Baseband 19000XXJVT
Kernel: 2.6.35.7-19000XXJVT-CL617736
[email protected] #Semaphore_1.9.1bm
Can i just go into CWM and install
Click to expand...
Click to collapse
Follow this Video Guide for flashing ICS

kkhvicha said:
i installed Onecosmic's ICS Port Android 4.0.3 RC1 but wi-fi doesn't seem to work any suggestion?
Click to expand...
Click to collapse
try changing your modem.. if that doesn't work then flash again..

Andro-ID V3.3-RC3

General discussion and reviews of users running on Andro-ID V3.3-RC3. I just tried it, but switched back to original MI 410 GB rom as the phone app on this rom sucks and GPU posts lower FPS. This also causes games such as GTA III to crash unexpectedly. TJ_Style must switch back to the original dialer and incase if he wishes to change, I suggest use a dailer/phone app which has a different all receiving screen. I really face a problem receiving calls with sweaty fingers. Guys please post your reviews here. Thanks.

Hi i tried to install the rc3 7z file via SUT 1.8.2 but it doesn't seem to recognise the 7z file that's available for download.. it keeps asking for an nb0 / xml file selection . do i need to change the extension or something before flashing ?
i just had a corrupted download the redownloaded 7z was extracting fine.

older backup did not work with this rom's recovery
guy's today i nearly braked by phone.
after trying this rom, when i try to flash backup made by napstar recovery then after installation when i try to reboot the phone, i m stucked at andro-id logo.
then i take battery out and boot into recovery again, then i try to update to napstar recovery. i flash the zip file and reboot the recovery. then i am also not able boot into recovery too.
then i flash stock 2.3 rom through SUT LR v1.8.2 and boot into download mode again replaced stock recovery.img with napstar's one in image folder. after that i booted into recovery and flashed my backup
thank's god my phone is safe now and running edowar great cm7.2

Hi Kallan_suz, you need to extract the .7z file using winrar. There is a file with an extension .nb0 in it. This is the file sut lr is asking for. If U need any more help post here. Its very easy yo flash though. Connect the fone and U are good to go.
Mithil

strange problem when i try to install this .nb0 it says some kind of error using sut

Dude use SUT LR 1.8.2, the other version 1.7 gives errors. Search on Google with this name and U shud find it.

Sharp Rom Vs Andro-ID V3.3-RC3
Can anyone let me know pros and cons of these 2 two roms? Coz i am very much confused selecting one. I am using Sharp Rom for my MI410 but i didn't find anything special in this rom.
SO awating your reply eagerly.

[email protected] said:
Can anyone let me know pros and cons of these 2 two roms? Coz i am very much confused selecting one. I am using Sharp Rom for my MI410 but i didn't find anything special in this rom.
SO awating your reply eagerly.
Click to expand...
Click to collapse
hi
i have used both the roms and both seem to be more or less the same
its just that i feel that the battery is better on the sharp rom

Thanks for ur reply bro. so may be i should use this rom untill our great developers gift us with most awaited ICS ROM
Sent from my SH8188U using XDA App

Hi, having problem when reflash cm7 rom from andro-id rc3 via cwm recovery.
After install Andro-id RC3 rom via SUT LR, i decided went back to edowar cm7, then i flash the cm7 thru cwm recovery (fullwipe & install zip)
I end up stuck at the "ANDRO-ID" logo during reboot, now I flash back to andro-id rc3 via SUT again.
May I know how to flash CM7 rom from Andro-id? need help =(

orangez1988 said:
Hi, having problem when reflash cm7 rom from andro-id rc3 via cwm recovery.
After install Andro-id RC3 rom via SUT LR, i decided went back to edowar cm7, then i flash the cm7 thru cwm recovery (fullwipe & install zip)
I end up stuck at the "ANDRO-ID" logo during reboot, now I flash back to andro-id rc3 via SUT again.
May I know how to flash CM7 rom from Andro-id? need help =(
Click to expand...
Click to collapse
Ok, here's what U need to do. Flash back to the stock SPICE GB rom, because Sharp and RC3 use different kernel. Then flash back to CM 7.2.
Hope this helps.

Guide to Install Rom using Sut LR
Hello friends,
This video will let you know how to install ROM using
SUT LR 1.8.2 well check out thje video how to install
for those ho do not know or have any problem installing...
in this i install Andro-id RC3
Thankz TJ. your the man.
as said by you. all the RC3 download should be counted...
hope you wil come out with ICS soon.. we know your on the road map to ICS.
hope to see soon.
This video will show you how to install the Andro-id Rc3
inforall.webs.com/spicemi410.htm
please download the software from the below link...
you will need SUT LR software to install the RC3
mediafire.com/download.php?di3xii1yy3ii4c3

hi i noticed few thing in this fw the camera refused to work by giving cannot connect error then after somehow it worked the sound production in hp is not that great earlier was using csl gingerbread rom the sound production was awesome plz contribute is it me or is it the rom whose facing such problem

Having wifi connection problem with this rom
I have tested this rom for a few days.
Everything is ok, but the only problem I have is the wifi connection.
It can't connect to my office new TP-Link TL-WA801ND.
But it works with my old BelkinG.
Anyone can help me?? Thanks!!

Althought I'm running on CM7 now
But I was use this ROM for 6weeks
This ROM has good performance n very stable
But 2 things which annoying me,,so annoying
1.Headset Volume too loud,,maybe kernel build problem,,I use headset volume control to minimize problem
2.If RAM usage too heavy,,it cause auto reboot(not sudden reboot)so you must using AKM/AMM or for best experience,use V6Supercharger script
Thats I feel of this ROM
Hey guys,,is anyone have Bravia engine tweak for this device?
Edit : ah i forgot 1thing,,bad camera start if you have low RAM,,it caused black screen n FC,,try again if you experience that,also bad video result,resulting .3gp
Sent from my CSL-MI410 using Tapatalk 2

I just installed this ROM last night. I don't find any significant difference between this and sharp ROM, with some added features. Everything works ok including FM radio. I did not test the hdmi feature.
Guys can someone tell me what is the difference between a stock ROM like Sharp and this Andro-ID V3.3-RC3, I find this very similar to rooted sharp ROM with some differences like, lock screen and bloatware removed. I am sure there must be some advantages and better features that I might be not aware of. Guys please enlighten me about the better features that I can use. I am on this ROM right now.
Thanks in advance...
Sent from my FIH-FB0 on Andro-ID V3.3-RC3 using XDA

Hi,
I have just installed this ROM. Everything seems to be working fine except GPS. The GPS is not locking. I tried rebooting several times. Whenever I tried to turn GPS on, it's just blinking but not locking. I tried for more than 15 minutes. Any fix for this?
Sent from my FIH-FB0 using XDA

Install faster fix and choose a server for your country then try gps test app for locking
Sent from my MacLite-FB0 using XDA

bravida engine
does bravida engine work on this room

[q] help installing rocket rom

hello,
first of all i am a new user so please no jargon's and hard words for me.
I am trying to install rocketrom V22 on my SGN
i have
PDA - N7000XXKL3
CSC - N7000DDKL1
PHONE- N7000DDKL1
i rooted my phone using Initial CF root flasher and then went into recovery mode and flashed rocket rom.
but the phone got stuck on the boot video of rocket rom.
what am i doing wrong. will i have to install other kernel before installing the rom.?
Please some one give me complete installation steps.
thnx in advance.

abhi29021992 said:
hello,
first of all i am a new user so please no jargon's and hard words for me.
I am trying to install rocketrom V22 on my SGN
i have
PDA - N7000XXKL3
CSC - N7000DDKL1
PHONE- N7000DDKL1
i rooted my phone using Initial CF root flasher and then went into recovery mode and flashed rocket rom.
but the phone got stuck on the boot video of rocket rom.
what am i doing wrong. will i have to install other kernel before installing the rom.?
Please some one give me complete installation steps.
thnx in advance.
Click to expand...
Click to collapse
Go back in recovery, wipe data/factory reset, wipe cache and dalvik cache, reflash the rom and reboot, that should do it

it means it doesnt matter no what kernel i am. i can flash any rom on it.?
like i have KL3 but rocket is LA4.?

abhi29021992 said:
it means it doesnt matter no what kernel i am. i can flash any rom on it.?
like i have KL3 but rocket is LA4.?
Click to expand...
Click to collapse
That doesn`t matter, just wipe and reflash rocket rom as i said earlier, it will boot up

gee2012 said:
That doesn`t matter, just wipe and reflash rocket rom as i said earlier, it will boot up
Click to expand...
Click to collapse
thnx.. it worked out.
and if you could tell me what is the kernel for.?
and i found a theme over xda which was ics theme for cynogen mod . can i flash it on rocket rom.?

abhi29021992 said:
thnx.. it worked out.
and if you could tell me what is the kernel for.?
and i found a theme over xda which was ics theme for cynogen mod . can i flash it on rocket rom.?
Click to expand...
Click to collapse
The kernel controls the most basic parts of the phone operation such as power management.
You cannot use themes for Cyanogenmod or any other ROM other than ones that state they are for Rocket ROM.

jambamkin said:
The kernel controls the most basic parts of the phone operation such as power management.
You cannot use themes for Cyanogenmod or any other ROM other than ones that state they are for Rocket ROM.
Click to expand...
Click to collapse
Thnx ...........

Moved To Q&A​
Please post all questions in the Q&A section​

Problems booting to install Roms

Because some roms are left hanging in the beginning and not booting, my phone is a Huawei U9000 X6, I tested several of the forum but none work properly, now I have Android v2.3.7 and want to do the upgrade to 4.0.
In advance thank you very much.

TheMasterMindGT said:
Because some roms are left hanging in the beginning and not booting, my phone is a Huawei U9000 X6, I tested several of the forum but none work properly, now I have Android v2.3.7 and want to do the upgrade to 4.0.
In advance thank you very much.
Click to expand...
Click to collapse
You gotta remember this ;-
You need kernel 2.6.35.7 for all ICS (Ice Cream Sandwich) Roms
You need kernel 2.6.32.9 for most GB (Ginger Bread) Roms
Android RC3 runs on 2.6.35.7
I think you should flash RC3 via SUT. Flashing RC3 gives you a stable OS and automatically gives you Clockworkmod so you can boot into recovery and flash any ics rom directly after this or any 2.6.35.7 based GB Rom
For some reason though, on neither kernels, this -http://forum.xda-developers.com/showthread.php?t=1619837 boots for me.
The indicator of wrong kernel is Blue screen on bootup

nachiketa.ramesh said:
You gotta remember this ;-
You need kernel 2.6.35.7 for all ICS (Ice Cream Sandwich) Roms
You need kernel 2.6.35.2 for most GB (Ginger Bread) Roms
Android RC3 runs on 2.6.35.7
I think you should flash RC3 via SUT. Flashing RC3 gives you a stable OS andautomatically gives you Clockworkmod so you can boot into recovery and flash any ics rom directly after this or any 2.6.35.7 based GB Rom
For some reason though, on neither kernels, this -http://forum.xda-developers.com/showthread.php?t=1619837 boots for me.
The indicator of wrong kernel is Blue screen on bootup
Click to expand...
Click to collapse
thank you very much for your valuable help, the problem I think is the kernel that I have now:
kernel: 2.6.32.9.
is there any way I can change the current kernel??

TheMasterMindGT said:
thank you very much for your valuable help, the problem I think is the kernel that I have now:
kernel: 2.6.32.9.
is there any way I can change the current kernel??
Click to expand...
Click to collapse
Flashing RC3 automatically gives you the ics kernel.
You can also use CK Kernel 0.4d in dev threads and flash via cwm but it will not work with your current rom

nachiketa.ramesh said:
Flashing RC3 automatically gives you the ics kernel.
You can also use CK Kernel 0.4d in dev threads and flash via cwm but it will not work with your current rom
Click to expand...
Click to collapse
thank you very much by observation I will look for files on the issues.

Here are the links you can refer to
RC3-
http://forum.xda-developers.com/showthread.php?t=1446449
CK Kernel 0.4d
http://forum.xda-developers.com/showthread.php?t=1728461

Help From .35 kernel to .32 kernel possible?
Hi i just wanted to ask since im on .35 kernel and using an ICS based rom CM9/AOKP ROM, how will i be able to go back to .32 kernel any links where i can get it and how to do it? i want to go back to MIUI .2.4.13 by free radical? thanks

endlesone said:
Hi i just wanted to ask since im on .35 kernel and using an ICS based rom CM9/AOKP ROM, how will i be able to go back to .32 kernel any links where i can get it and how to do it? i want to go back to MIUI .2.4.13 by free radical? thanks
Click to expand...
Click to collapse
Possible
Flash RC 1 through SUT LR
then Flash MIUI by FR
enjoy

RC1 from Andro id v3.3 rc1?
vivekb said:
Possible
Flash RC 1 through SUT LR
then Flash MIUI by FR
enjoy
Click to expand...
Click to collapse
by RC 1 you mean FB0G-Andro-ID_V3.3-RC1.7z
thanks

endlesone said:
by RC 1 you mean FB0G-Andro-ID_V3.3-RC1.7z
thanks
Click to expand...
Click to collapse
Yes. That should do the trick.
As an alternative, you can still flash GB stock from your manufacturer (most likely .32 kernel).

=)
k1chy said:
Yes. That should do the trick.
As an alternative, you can still flash GB stock from your manufacturer (most likely .32 kernel).
Click to expand...
Click to collapse
thanks for the reply.

After spending all night struggling with installing the kernel achieves install this ROM but I use the touch screen, anyone know what I can do???
rom is:
http://forum.xda-developers.com/showthread.php?t=1798814

[Q] This is getting annoying!

Dear all,
I am running CriskeloROM Note ICS v10 on N7000XXLRB and am fed up with it.. :crying:
Tryed to flash it with chrack XXLRQ rom, Cyanogen and RocketRom v11 but no matter what i do it just wont flash?
It barely starts to flash, and then it restarts as if nothing had happened?
I tryed to flash a new kernel: AbyssNote kernel because that the author of chrack advices me to do so in his original post... And when i try to flash Abyss kernel, it stars flashing, and just hangs on "installing..."
Any ideas? ::crying:

AviatorBobo said:
Dear all,
I am running CriskeloROM Note ICS v10 on N7000XXLRB and am fed up with it.. :crying:
Tryed to flash it with chrack XXLRQ rom, Cyanogen and RocketRom v11 but no matter what i do it just wont flash?
It barely starts to flash, and then it restarts as if nothing had happened?
I tryed to flash a new kernel: AbyssNote kernel because that the author of chrack advices me to do so in his original post... And when i try to flash Abyss kernel, it stars flashing, and just hangs on "installing..."
Any ideas? ::crying:
Click to expand...
Click to collapse
try full wipe in cwmr if you are on latest safe kernels or flash pre-rooted GB rom (link in my sig) using pc odin and then start all over again.

AviatorBobo said:
Dear all,
I am running CriskeloROM Note ICS v10 on N7000XXLRB and am fed up with it.. :crying:
Tryed to flash it with chrack XXLRQ rom, Cyanogen and RocketRom v11 but no matter what i do it just wont flash?
It barely starts to flash, and then it restarts as if nothing had happened?
I tryed to flash a new kernel: AbyssNote kernel because that the author of chrack advices me to do so in his original post... And when i try to flash Abyss kernel, it stars flashing, and just hangs on "installing..."
Any ideas? ::crying:
Click to expand...
Click to collapse
First, be kind enough in appreciating the developers for the ROMs they provide.
Nobody asks you to install any of the ROMs they provide. Its you who use them. You get to use it for free but you neither be courteous nor thankful for the ROMs they provide you.
I never find any of the ROMs giving problems and all works charm. Use ODIN and downgrade to GB rom then use appropriate ROMs you wish CWM. Try to see Dr. Ketan's post on how to install a stock rom and later install Custom ROM of your choice.
http://forum.xda-developers.com/showthread.php?t=1424997

xda rocks said:
First, be kind enough in appreciating the developers for the ROMs they provide.
Nobody asks you to install any of the ROMs they provide. Its you who use them. You get to use it for free but you neither be courteous nor thankful for the ROMs they provide you.
I never find any of the ROMs giving problems and all works charm. Use ODIN and downgrade to GB rom then use appropriate ROMs you wish CWM. Try to see Dr. Ketan's post on how to install a stock rom and later install Custom ROM of your choice.
http://forum.xda-developers.com/showthread.php?t=1424997
Click to expand...
Click to collapse
Why do you attack the op? He hasn't done anything wrong. He is fed up because nothing works and he asks for help. What's wrong with that? Back to topic: I would try to flash a full wipe GB rom using pc odin. If it does not work flash a safe kernel and do a full wipe in cwm recovery. Then you can try again to flash your desired rom.
Sent from my Galaxy Note running ICS

AviatorBobo said:
Dear all,
I am running CriskeloROM Note ICS v10 on N7000XXLRB and am fed up with it.. :crying:
Tryed to flash it with chrack XXLRQ rom, Cyanogen and RocketRom v11 but no matter what i do it just wont flash?
It barely starts to flash, and then it restarts as if nothing had happened?
I tryed to flash a new kernel: AbyssNote kernel because that the author of chrack advices me to do so in his original post... And when i try to flash Abyss kernel, it stars flashing, and just hangs on "installing..."
Any ideas? ::crying:
Click to expand...
Click to collapse
Its easy u don't have full root yes u don't just have head to d.r ketan profile page and download GB rooted + cwm then flash it using PC Odin then after it finishs just head to cwm and wipe data and cash then flash any ROM u want have fun hoo I helped BTW the same thing happened to me

AviatorBobo said:
Dear all,
I am running CriskeloROM Note ICS v10 on N7000XXLRB and am fed up with it.. :crying:
Tryed to flash it with chrack XXLRQ rom, Cyanogen and RocketRom v11 but no matter what i do it just wont flash?
It barely starts to flash, and then it restarts as if nothing had happened?
I tryed to flash a new kernel: AbyssNote kernel because that the author of chrack advices me to do so in his original post... And when i try to flash Abyss kernel, it stars flashing, and just hangs on "installing..."
Any ideas? ::crying:
Click to expand...
Click to collapse
First step, don't desperate.
When u do desperate, u will do as what u write. Looks like blaming on the dev.
I agree with xda rocks, that all roms here is provided in a way free to use, with a lil bit donation or thanks only.
But the dev has tried their best to puke their rom in any means before releasing out. And the instruction of the flashing is based on testing experienced also.
I m sorry if u never mean to attack or disrespect the dev, but u make evryone think so with how u write in ur post.
Starting from saying u fed up with criskelorom, then blame on chrack for advising u to install abyss which end up not working for ur device.
I have no idea what tweaks and change have u done to ur phone, but always advisable to do a full wiping when u want to cross over rom, either by going back to GB first, or use a safe kernel on ICS. You may refer to dr. Ketan method.
I came from criskelo, change to stock rom, then change to chrack, then classic, now on chrash.
All rom is just fine.
Thanks to all the devs.
Sent from my GT-N7000 at the corner of this rounded earth.

Thank you all for your replyes I will try to downgrade to ginger first, and then upgrade again!
To antique_sonic & xda rocks: You guys got i all wrong. I am not blaming the developers for anything? And i am the first to say thank you for their hard work. What i ment was that i was fed up with the problem that I was having? there is / should be a huge difference...?
Anyways, thank you guys for defending the developers...

AviatorBobo said:
Thank you all for your replyes I will try to downgrade to ginger first, and then upgrade again!
To antique_sonic & xda rocks: You guys got i all wrong. I am not blaming the developers for anything? And i am the first to say thank you for their hard work. What i ment was that i was fed up with the problem that I was having? there is / should be a huge difference...?
Anyways, thank you guys for defending the developers...
Click to expand...
Click to collapse
Good.
Glad to hear that. Coz i only feel the blame on ur first post.
But since u clear it up, lets just forget it.
And good luck.
Any probs just post back.
Remember to full wipe if u change rom.
I always do that, and come with no probs at all.
Sent from my GT-N7000 at the corner of this rounded earth.