trying for almost one week............but can't get the solution:crying:
my device cannot connect to usb.........while usb debugging is ON:crying:........
my pc shows [no device found].....but the drivers are installed....help me
right now i m using cm10(official)
os :win 7 sp1 64 bit
rv0000s said:
trying for almost one week............but can't get the solution:crying:
my device cannot connect to usb.........while usb debugging is ON:crying:........
my pc shows [no device found].....but the drivers are installed....help me
right now i m using cm10(official)
os :win 7 sp1 64 bit
Click to expand...
Click to collapse
Go to apps, push menu button, choose either camera or massstorage mode. And enable usb debugging and enable root access for apps and adb. This should solve it. If not, reinstall your cm10 with all wipes.
Sent from my LG-P970 using xda app-developers app
N00BY0815 said:
Go to apps, push menu button, choose either camera or massstorage mode. And enable usb debugging and enable root access for apps and adb. This should solve it. If not, reinstall your cm10 with all wipes.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
thanks NOOBY0815.....
this method works like charm..............
what now I did is ...changed the USB connection type to camera(PTP) and then re-checked the usb debugging.....and then i thanked you.....
N00BY0815 said:
Go to apps, push menu button, choose either camera or massstorage mode. And enable usb debugging and enable root access for apps and adb. This should solve it. If not, reinstall your cm10 with all wipes.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
don't understand why you wrote "go to apps" - in my CM10 on my p970 the USB options are in storage menu :
settings->storage->[press menu]->USB computer connection
then after choosing Mass storage i can finally debug using ADB
sharp80 said:
don't understand why you wrote "go to apps" - in my CM10 on my p970 the USB options are in storage menu :
settings->storage->[press menu]->USB computer connection
then after choosing Mass storage i can finally debug using ADB
Click to expand...
Click to collapse
Sorry for mixing up ROMs... and btw this is not the only question i was answering that day... anyway you found your solution and my suggestion was partially right if you hadnt been lazy before, you had found out about it on your own, cause around 10 ppl already asked about it...
Sent from my LG-P970 using xda app-developers app
Turn off your phone and battery get out...wait for while. Put battery in, turn on your phone and try to connect via USB
Related
My Droid3 won't connect to USB.
When I connect my Droid 3 to computer,The phone has no response(nothing in status bar) and in the computer's Device Manager,
there are many unkonwn devices:
Diag Interface
Modem Interface
MUX Interface
NMEA Interface
TCMD Interface
After search on Internet,I think I may turn the phone into Diag Mode ,
but how to disable diag mode?
and there is other problems?
Anyone can help me? thank you!
Have you tried to disable/enable USB debugging in settings?
yukinok25 said:
Have you tried to disable/enable USB debugging in settings?
Click to expand...
Click to collapse
When I Switch USB Debug(turn on or turn off) when USB is connected, the staus bar will show USB option(PC mode,USB mass storge,charge,etc..)
But no matter what I choose,It does't work.
And when I run adb command(usb debug on) , It shows "device not found".
yukinok25 said:
Have you tried to disable/enable USB debugging in settings?
Click to expand...
Click to collapse
Install the drivers from the SBF thread.
MrObvious said:
Install the drivers from the SBF thread.
Click to expand...
Click to collapse
What driver??
I have installed Motorola_End_User_Driver_Installation_5.7.0
Change ports and/or USB cable
Sent from my XT860 using xda app-developers app
AragornPE said:
Change ports and/or USB cable
Sent from my XT860 using xda app-developers app
Click to expand...
Click to collapse
I had changed ports ,and USB cable
And windows xp and win 8.
But It's the same.
are you using the stock usb cable?
are you running a rom?
what recovery are you using?
if you have a custom recovery hook your phone up to your computer and boot your phone into recovery either cwm or safestrap
go to mounts and storage and try to mount sdcard and see if that works
p.s
make sure usb debugging is enabled and check mass storage in the drop down
Was there ever a solution found? My droid 3 for some reason the usb debugging isn't working, the computer sees it and I can access my files, but debugging won't enable. I turned it on and off in settings a bunch of times and tryed a few different drivers
When I connect my phone via usb to pc and check option copy files to pc and from pc .....won't connect, just spinning around circle sign. What can be problem?
Sent from my GT-S5570 using xda premium
rakijaman said:
When I connect my phone via usb to pc and check option copy files to pc and from pc .....won't connect, just spinning around circle sign. What can be problem?
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
Check "unknown source" and "usb debugging" then rebooting your phone
Sent from Lil'G GT-S5570
Press "Thanks" if I'm helping you
Thanks dude it's working, but when I tried second time won't work. Maybe is problem with my usb port on pc
Sent from my GT-S5570 using xda premium
Always that... not working still even I press connect that circle spinning around... it's not error with pc usb ports
Sent from my GT-S5570 using xda premium
rakijaman said:
Always that... not working still even I press connect that circle spinning around... it's not error with pc usb ports
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
Try to delet the drivers on your pc and install them new! Make sure you got the right ones!!
And by the way wrong section buddy, questions belongs to the Q&A section!!
Sent from my GT-S5570 using xda premium
reboot device, reboot pc.
if not helped, open terminal emulator and type:
su ->hit enter
setprop persist.sys.usb.config=mass_storage ->hit enter
reboot device and try again.
http://forum.xda-developers.com/showthread.php?t=1321582
Sent from my GT-5660
su
setprop persist.sys.usb.config mass_storage
reboot
the command up there in Terminal Emulator:-"
Hi everyone, unfortunatly i broke my screen, my phone was rooted and i was using CM7
i would like to recover my files, but due to the my broken screen i can't see anything so i can't mount usb storage,
I also heard that if i activate usb debugging mode i can acces my files easily.. but debugging mode wasn't activated..
and finally I heard that through Recovery Mode, i can mount usb storage, but once again i cannot see or do anything ..
so can you help me please ?
thanks a lot for your help, and thanks to everyone on this forum for their help and their roms etc !
AW: [Q] Broken Screen..
Search on google for a pic from the the right recovery version then you navigate blind witch the picture.
If this dont work you can force the into recovery mode and plug it to the PC. You can save your data using adb without enabling usb debugging
Sent from my GT-I9300 using xda app-developers app
i think that differ on alternate versions of CWM
on my phone:
6x volume down, power, 2x volume up, power. but i'm running cwm6x so don't know if it works
KUN1 said:
Search on google for a pic from the the right recovery version then you navigate blind witch the picture.
If this dont work you can force the into recovery mode and plug it to the PC. You can save your data using adb without enabling usb debugging
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
kronos111 said:
i think that differ on alternate versions of CWM
on my phone:
6x volume down, power, 2x volume up, power. but i'm running cwm6x so don't know if it works
Click to expand...
Click to collapse
Hi thanks a lot for your answers, i think i was on cwm 3.0, i found some screenshot, and yes it's the same, thanks i will try it !
how can i save my data with adb without enabling usb debugging ?
thanks a lot !
AW: [Q] Broken Screen..
Go into recovery and plug it to the pc. Open cmd and navigate to your adb folder. Then type "adb devices" you should now see your phone listed as some random numbers. If not you did something wrong.
If you see your device type this "adb pull /sdcard C:\…" and the whole sd should be copied to the directory.
Sent from my GT-I9300 using xda app-developers app
KUN1 said:
Go into recovery and plug it to the pc. Open cmd and navigate to your adb folder. Then type "adb devices" you should now see your phone listed as some random numbers. If not you did something wrong.
If you see your device type this "adb pull /sdcard C:\…" and the whole sd should be copied to the directory.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
thanks a lot !! with this method can i also save my contacts, notes etc ? thank you so much !!
AW: [Q] Broken Screen..
The contacts are normally saved with your gmail account.
With this command you push your whole sd to the pc but i think if you want also the app data you have to use another command and you need root.
Sent from my GT-I9300 using xda app-developers app
KUN1 said:
The contacts are normally saved with your gmail account.
With this command you push your whole sd to the pc but i think if you want also the app data you have to use another command and you need root.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
thanks a lot, i dont think my contacted were synced.. i will check that too
i'm root so i'll search for that feature,
i dont have my phone untill a week, so i'll test and i'll tell you !
thanks a lot for all your helps !
thanks a lot, i finally could save all my files and reset my phone
i started the phone in recovery mode, i connected it to pc with adb drivers, but i wasn't able to copy or mount anything, i installed android commander software, so i was able to have screenshot from my phone while browsing the recovery, i mounted usb storage, i copied all my files
then i wiped the phone
and i checked if everything was deleted with androidscreencast, i was able to see my phone's screen live, and with the mouse i could browse my phone ( the touchscreen didn't work too )
thanks a lot for your help !
So I recently installed ubuntu 12.10 and I want to connect the o2x with the computer but it is only chargin....how can I have Mass Storage like in windows?
What rom? It's difficult to help without any info
Sent from my LG-P990 using xda app-developers app
It should work out of the box, unless you have JB ROM. In that case, follow this:
http://www.webupd8.org/2012/12/how-to-mount-android-40-ubuntu-go-mtpfs.html?m=1
Sent from my LG-P990
Check if you dont have Fast Charge ON. Fast Charge have to be turned OFF.
I have Mivv's Unofficial CM10.1 Build beta 7 and Kowalski Kernel. I have PSP Fast CHarge turned off
asmerito said:
It should work out of the box, unless you have JB ROM. In that case, follow this:
http://www.webupd8.org/2012/12/how-to-mount-android-40-ubuntu-go-mtpfs.html?m=1
Sent from my LG-P990
Click to expand...
Click to collapse
I've got the app but when I'm mounting my device I get an error in terminal that permision denied and unable to initialize device
MTP or Mass Storage
1. First you need to be sure that the USB Fast Charge is switched off ( if you're using Kowalski Kernel ).
2. If you connecting using MTP, you will need some tools. Use gMTP. Either you can mount your MTP device as directory using mtpfs. Follow this instruction: http://forum.xda-developers.com/showthread.php?t=2055563
3. If you want to connect using UMS (USB Mass Storage), you need to switch it in Settings->Storage->USB computer connection (context menu)->Mass Storage. Or just select this method in stock firmware dialog. Then you need to reconnect your device and select usb storage in status bar.
4. If you have problem with all these methods, you can use ADB (Android Debug Bridge) to manage your files. Just enable USB Debugging mode in Settings->Developers options(switch it on)->Android debugging. Then install android sdk tools in your system.
Follow this instruction. http://www.xda-developers.com/android/installing-adb-on-ubuntu-the-easy-way/. Then use adb pop and adb push commands to manage with your content.
5. If you have problem with all of this method, you can use AirDroid application and manage your files wirelessly using Wi-Fi.
http://www.airdroid.com/
Have a good luck, mate!
I just needed to enable USB debuging. I enabled it and it solved all the problem
Hi,
I'm using CM 7.2 and I can't access any mass storage - phone > PC USB connection at all. Any ideas?
My Nexus 6 wont connect with MTP...only PTP.
It shows on the connected media but it doesnt show up on My Computer.
It doesnt matter if i turn debug on or off, still doesnt show.
If i switch to PTP, it shows up but i cant add or edit the folder and it only
shows 'Pictures' and DCIM folders
Im trying to add zip files.
how do i fix the MTP problem?
collinjm01 said:
My Nexus 6 wont connect with MTP...only PTP.
It shows on the connected media but it doesnt show up on My Computer.
It doesnt matter if i turn debug on or off, still doesnt show.
If i switch to PTP, it shows up but i cant add or edit the folder and it only
shows 'Pictures' and DCIM folders
Im trying to add zip files.
how do i fix the MTP problem?
Click to expand...
Click to collapse
Do you have TWRP installed?
Evolution_Tech said:
Do you have TWRP installed?
Click to expand...
Click to collapse
Yes i have TWRP installed. Newest Version
collinjm01 said:
Yes i have TWRP installed. Newest Version
Click to expand...
Click to collapse
Boot into TWRP and connect to PC. See if you can mount MTP that way. Not a fix but could get your files transferred. Also may prove if more than a ROM issue.
I have the same issue? An it still is not coming up with TWRP? I tried the DEV M preview, it's good. But will not connect to PC as MTP?
Usb debugging off, selected mtp in dev options, reboot phone. works now?
I'm actually on stock rooted and unlocked, so idk what's up
Sent from my Nexus 6 using XDA Free mobile app
collinjm01 said:
I'm actually on stock rooted and unlocked, so idk what's up
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
Have you tried a different cable? Different USB port?
I tried different ports but the phone will connect adb and ptp so I assumed it was the phone. When I connect using mtp, it makes the connection sound but nothing happens.
Sent from my Nexus 6 using XDA Free mobile app