Related
OK i did a search but did not find anything really related..
a friend of mine at work here just handed me his 8125 after "attempting" to flash his ROM. Not sure what the heck he did BUT
1) the usb is not recognized so not active sync.
3) 3 battery meter only shows a plug (lower right ) yet the battery works.
the phone does recognice the charger..
HELP !!!
thanks in advance !
Reset, enter bootloader, reflash
how do you enter boatloader .. ?
what other 2 buttons with the soft reset button ?
DUlrich1227 said:
how do you enter boatloader .. ?
what other 2 buttons with the soft reset button ?
Click to expand...
Click to collapse
Camera Button is the only one you need to hold when resetting...
i apologize but i must be missing something..
i reset (soft reset and camera button) get cingular screen
starts to boot up and goes to today screen where it does not recognize usb..
is there something else i am to do ?
DUlrich1227 said:
i apologize but i must be missing something..
i reset (soft reset and camera button) get cingular screen
starts to boot up and goes to today screen where it does not recognize usb..
is there something else i am to do ?
Click to expand...
Click to collapse
Press the reset (or power down your device by holding the power button until you get the Okay to turn-off warning).
HOLD the camera button as your device powers up. This will get the BootLoader
just woke up and read your reply thanks ..
this is what i ended up doing
i bluetoothed from one of the roms enterbootloader.exe was able to run it
than ran one of the earlier rom upgrades..
re running the lockiwizb and will install sumters rom2
one question if you read this .. on both of the phones 8125's i get an error at the end of the bat file when running the lockiwiz.. is this normal ? is it because it was already ran once ? i am running it from the root (C
I cooked a rom for my ATT Tilt, after booting up the phone has no audio
Can't even hear through the ear piece when a call has been received.
now I try to load my previous rom, and activesync is giving me an error, remote networking error 1062, so my computer wont recognize the device, tried 4 different computers, same error.
maybe I need to reinstall activesync on my phone? does anyone know where I can download it... found activesync for the PC, but cant find it for the PPC.
thanks in advance..
Stacygirl said:
I cooked a rom for my ATT Tilt, after booting up the phone has no audio
Can't even hear through the ear piece when a call has been received.
now I try to load my previous rom, and activesync is giving me an error, remote networking error 1062, so my computer wont recognize the device, tried 4 different computers, same error.
maybe I need to reinstall activesync on my phone? does anyone know where I can download it... found activesync for the PC, but cant find it for the PPC.
thanks in advance..
Click to expand...
Click to collapse
1. what kitchen are you using?
2. what are you using as your base?
3. what radio are you using?
mbarvian said:
1. what kitchen are you using?
2. what are you using as your base?
3. what radio are you using?
Click to expand...
Click to collapse
Also, did you try putting the phone into bootloader and flashing from there?
scotchua said:
Also, did you try putting the phone into bootloader and flashing from there?
Click to expand...
Click to collapse
I tried putting it in bootloader mode, pressing the power button, camera button, and reset button, but the phone just restarts..
Stacygirl said:
I tried putting it in bootloader mode, pressing the power button, camera button, and reset button, but the phone just restarts..
Click to expand...
Click to collapse
try pushing the camera button ALL THE WAY (sounds stupid, but really push in the camera button) while pushing the stylus in the reset hole
mbarvian said:
try pushing the camera button ALL THE WAY (sounds stupid, but really push in the camera button) while pushing the stylus in the reset hole
Click to expand...
Click to collapse
just tried for 10 minutes, keep getting the message warning me if I really want to power down my device, yes or no
Stacygirl said:
just tried for 10 minutes, keep getting the message warning me if I really want to power down my device, yes or no
Click to expand...
Click to collapse
Don't push the power button down, just hold the camera button all the way down, and soft reset with the stylus.
scotchua said:
Don't push the power button down, just hold the camera button all the way down, and soft reset with the stylus.
Click to expand...
Click to collapse
ok I tried this way, im getting the error message, "error opening the shortcut or locating the target filename"
is there a way to boot a rom from my micro sd slot?
Stacygirl said:
is there a way to boot a rom from my micro sd slot?
Click to expand...
Click to collapse
You can, but you need to be able to get into bootloader. I'm not sure how you are getting the shortcut error when rebooting...it should at the very least just reboot normally.
mbarvian said:
1. what kitchen are you using?
2. what are you using as your base?
3. what radio are you using?
Click to expand...
Click to collapse
the rom u used was ppckitchen kaiser core
anyone know another method of getting into boat loader mode? maybe a boatloader app or something?
Stacygirl said:
anyone know another method of getting into boat loader mode? maybe a boatloader app or something?
Click to expand...
Click to collapse
Try this. Turn the phone off completely, press firmly and hold the camera button, then poke the reset button with the stylus. Do not go near the power button, and do not release the camera button until the bootloader comes up.
got it to work thanks for the assistance
I took the battery out, put it back it while the camera button, pressed the power button, then it went into bootloader mode
once it was in bootloader mode I was able to load the original rom
tested it, and my tilt is back running normal
thanks again, you guys are very helpful
I couldnt find a good title for this thread coz i donno how to explain it!
See the bellow video, first i cannot get to the bootloader screen. Then when the phone is on, after i press the power button the dial pad screen first, and the calendar screen after that will come up.
http://www.youtube.com/watch?v=5W1CJV0m3Ac
How could I fix this? i cannot even get back to original situation to get for warranty!
I think it's the source of my problem.
PS. i face this problem after i removed S2U (Slide to unlock) software
Can you get to the restore screen? (hold down the two front silver hard keys + Power)
With the phone completely off, You have to hold down the power + volume down button until the bootloader pops up...keep holding it until you see the colored strips.
Try Using the camera button i.s.o the volume down. Works fine for me on my X1
Try this, Connect your phone to the pc, make sure you are connected to the activesync. Then run the the hard spl tool, It should automatically put the phone into bootloader mode.
Thanks for replies,
yes i can get to the bootloader screen using hard spl manual tool, but it will stop on "Loading..." screen and it's not flashing!!!
isp_85 said:
Thanks for replies,
yes i can get to the bootloader screen using hard spl manual tool, but it will stop on "Loading..." screen and it's not flashing!!!
Click to expand...
Click to collapse
When it says "Loading..." it means it cannot find KOVSimg.nbh on your SDcard or there is nog USB connecting through which you're trying to update.
i don no but did u check if ur volume key is working...also do a hardrest....stteing>system>clear storage
When it says "Loading..." it means it cannot find KOVSimg.nbh on your SDcard or there is nog USB connecting through which you're trying to update.
Click to expand...
Click to collapse
No! the image is in the sd fat32 card. When there is no image in that it will say image not found!
i don no but did u check if ur volume key is working...also do a hardrest....stteing>system>clear storage
Click to expand...
Click to collapse
Yes, my volume key is working fine in windows with no problem!
Actually i've already did a clear storage but.... nothing....
Well I had the same problem when trying to flash from a Vista PC and USD cable. (for the hard SPL, glashing with a SD card worked fine, but you should disconnec the USB cable to be sure that it takes the SD card)
I used my wifes small netbook with XP and there it worked instantly. If you use a Vista machine, try it with an other XP machine.
Regards,
Mark
isp_85 said:
No! the image is in the sd fat32 card. When there is no image in that it will say image not found!
Yes, my volume key is working fine in windows with no problem!
Actually i've already did a clear storage but.... nothing....
Click to expand...
Click to collapse
Try other ROM, if it was stock Rom so try other cooed ROM, or vice versa
ok try this. Restore your phone to stock spl, Let the hard spl tool put your phone into bootloader mode. Once its in this mode, Try to run Sony ericsson update tool to update it to the R3A firmware.
Hardspl is completley not working!!!
Is there a dead mode method? i think that would help me?
Sorry, but I have a big big problem. I have an x1, and I flashed the previous version of Energy Rom on the sd card. BUT I wanted to re-flash these, and the phone blocked in initial screen..the update rom one..
So, every time I try to update, it starts and after a few second, and when it start to update, the screen turns off. Finally, anyone can help me? I don't know how I can fix this situation PLEASE, HELP ME!!
Thanks, Fabio
Remove your Micro SD-CARD, and enter in flash mode! Volume down + power on!
Open the Update Phone Utility with the rom of your choice! Remember to rename your rom to: KOVSIMG.nbh
Sorry for English.
Faffa_mcr said:
Sorry, but I have a big big problem. I have an x1, and I flashed the previous version of Energy Rom on the sd card. BUT I wanted to re-flash these, and the phone blocked in initial screen..the update rom one..
So, every time I try to update, it starts and after a few second, and when it start to update, the screen turns off. Finally, anyone can help me? I don't know how I can fix this situation PLEASE, HELP ME!!
Thanks, Fabio
Click to expand...
Click to collapse
first time u must delete first the previous version on ur sd card... than u can update the new one... and dont forget to tasks 29 before u flash the rom...
Sorry guys, but when I enter in flash mode, and I press the power button and it should load the ROM, instead it always restart after 2-3 second. I don't know what to do..please help me!!
It sounds to me that you're not holding the buttons down correctly
paul c said:
It sounds to me that you're not holding the buttons down correctly
Click to expand...
Click to collapse
I tried again, but the result is the same.. uff..
hardspl
Faffa_mcr said:
I tried again, but the result is the same.. uff..
Click to expand...
Click to collapse
1. Try to pull up the batery for 10 menute.. and replace it again.. and press volume down and the power button together and dont realese until the boot screen appear...
2. connect ur x1 with the computer and hardspl the phone with the new spl 0.78.. when its finish the phone will restart.. pull the batery again for 1 menute.. and replace again... go to bootloader screen again like i explain in point 1.. after that conect again ur x1 with computer... do task29.. when finish its will restart again...
after u do task29.. u can flash ur x1 with the computer or with storage card..
this was the link for SPL 0.78 and task29 and if u still confused... http://www.826x.blogspot.com/
i think you can't flash the energy rom and always fail.. because u not hardspl your x1..
ahmadin said:
1. Try to pull up the batery for 10 menute.. and replace it again.. and press volume down and the power button together and dont realese until the boot screen appear...
2. connect ur x1 with the computer and hardspl the phone with the new spl 0.78.. when its finish the phone will restart.. pull the batery again for 1 menute.. and replace again... go to bootloader screen again like i explain in point 1.. after that conect again ur x1 with computer... do task29.. when finish its will restart again...
after u do task29.. u can flash ur x1 with the computer or with storage card..
this was the link for SPL 0.78 and task29 and if u still confused... http://www.826x.blogspot.com/
i think you can't flash the energy rom and always fail.. because u not hardspl your x1..
Click to expand...
Click to collapse
Sorry, I tried to connect the x1 to pc..but the pc doesn't recognize the phone..
I looked that the power button have a red light, and when this turn off, it go to bootloader mode, but after few second (it's in update mode) the phone turn off..
Someone has the same problem? I don't know what to do, I'm desperate! I can't use my phone
first remove sd card.
then pull out battery, press power button without battery on phone for about 30 sec.
then place battery. try to hard reset without OS:
press and hold both softkeys of X1, and press power button to turn on phone. but don't release softkeys until appears blue text with white background. slide put keyboard press R, wait to complete then press SPACE.
phone will be hard resetted. if not helped to boot OS, or there's no OS, or you did task29 before then do another task29 after this prosedure.
hope it helps
Faffa_mcr said:
Sorry, I tried to connect the x1 to pc..but the pc doesn't recognize the phone..
Click to expand...
Click to collapse
did you try another usb port of PC?
orkhanahmadov said:
did you try another usb port of PC?
Click to expand...
Click to collapse
mmm no...but I think that's another problem, coz when I put the phone on ac mode, it's the same situation...
orkhanahmadov said:
first remove sd card.
then pull out battery, press power button without battery on phone for about 30 sec.
then place battery. try to hard reset without OS:
press and hold both softkeys of X1, and press power button to turn on phone. but don't release softkeys until appears blue text with white background. slide put keyboard press R, wait to complete then press SPACE.
phone will be hard resetted. if not helped to boot OS, or there's no OS, or you did task29 before then do another task29 after this prosedure.
hope it helps
Click to expand...
Click to collapse
orkhanahmadov said:
did you try another usb port of PC?
Click to expand...
Click to collapse
Very good explaination....
Faffa_mcr said:
mmm no...but I think that's another problem, coz when I put the phone on ac mode, it's the same situation...
Click to expand...
Click to collapse
did you try method that wrote first.
and off course try another usb port, or another usb cable.
because if the phone did'nt recognized by PC, it means there's problem with cable or usb port if other things are OK.
When I wake up the phone.It's show the HTC logo and it was like force connect to PC.But when I connected it was show error code in zune c101002e
I can't hard reset and flash ROM this phone because it's wasn't show the three color page!!
Whats your last operation before this error appears on your Phone?
How do you try to Hard Reset your Phone?
Is this the Original SD Card? you have changed SD-Card?
Whats your last operation before this error appears on your Phone? >>> 7.8 PPJD Custom ROM
How do you try to Hard Reset your Phone? >>> Can't hard reset.I try to press and hold the Volume Up and Volume Down buttons and press the Power button.But it have the same effect
Is this the Original SD Card? you have changed SD-Card? >>> Original SD Card
Restore it
With the gold card method go back to any rom with a Bootloader below v5.
remember this before flashing a custom rom
1st: battery over 50%...
2nd: Cotulla's RSPL
3rd: Deepshinig Rom for your convenience.
Look my signature.
faustolg said:
With the gold card method go back to any rom with a Bootloader below v5.
remember this before flashing a custom rom
1st: battery over 50%...
2nd: Cotulla's RSPL
3rd: Deepshinig Rom for your convenience.
Look my signature.
Click to expand...
Click to collapse
I'm now facing the same problem, so if I want to restore the rom and bootloder by using Deepshinig Rom, what's the step to do?
1. My battery is full.
2. Mine is Cotulla's RSPL
3. How to recover rom with a Bootloader ?Is there any link regarding to it.
Thanks in advance.:good:
What?
kaotomut said:
I'm now facing the same problem, so if I want to restore the rom and bootloder by using Deepshinig Rom, what's the step to do?
1. My battery is full.
2. Mine is Cotulla's RSPL
3. How to recover rom with a Bootloader ?Is there any link regarding to it.
Thanks in advance.:good:
Click to expand...
Click to collapse
then just install Deepshining with the ROMUpdateUtility.exe and be done with it... you'll have Deepshining in less than 5 minutes...
faustolg said:
then just install Deepshining with the ROMUpdateUtility.exe and be done with it... you'll have Deepshining in less than 5 minutes...
Click to expand...
Click to collapse
We can't do that because we can't enter "Tri-coloured mode" by pressing vol down then turn power on ,just "USB host mode available" by pressing vol down + camera then turn power on.
Any ideas or advices?
Anyway thanks for replying,we're so appreciate it. :good:
kaotomut said:
We can't do that because we can't enter "Tri-coloured mode" by pressing vol down then turn power on ,just "USB host mode available" by pressing vol down + camera then turn power on.
Any ideas or advices?
Anyway thanks for replying,we're so appreciate it. :good:
Click to expand...
Click to collapse
When you use the goldcard method you put the device into USB host mode, not bootloader mode.
To enter USB host mode - Power off the device - Press and hold down the Volume down + Volume up + Camera buttons together and power on the device, this will bring the device into USB host mode and the screen will show, "Enter USB Host Mode...."
Just follow the goldcard tutorial here -
http://forum.xda-developers.com/showthread.php?t=1597837
xdrc45 said:
When you use the goldcard method you put the device into USB host mode, not bootloader mode.
To enter USB host mode - Power off the device - Press and hold down the Volume down + Volume up + Camera buttons together and power on the device, this will bring the device into USB host mode and the screen will show, "Enter USB Host Mode...."
Just follow the goldcard tutorial here -
http://forum.xda-developers.com/showthread.php?t=1597837
Click to expand...
Click to collapse
Wow!!Thanks a lot. I'll try today, I need to prepare lots stuff. especially no do rom
I'll report the result as soon as possible.
:laugh:
To xdrc45
I love you guy. You have brought back my phone from death. By following your guide and your link. My phone boots perfectly now.
Thanks a million times from the bottom of my heart.
kaotomut said:
Wow!!Thanks a lot. I'll try today, I need to prepare lots stuff. especially no do rom
I'll report the result as soon as possible.
:laugh:
To xdrc45
I love you guy. You have brought back my phone from death. By following your guide and your link. My phone boots perfectly now.
Thanks a million times from the bottom of my heart.
Click to expand...
Click to collapse
You're very welcome... I'm glad I could help!
I'm happy for you that your device is working again, enjoy!!
You can use the goldcard method to downgrade the devices SPL, install XSPL and then flash a custom rom too if you want.
Take a look at Shadow's tutorial -
http://forum.xda-developers.com/showthread.php?t=1295068
xdrc45 said:
You're very welcome... I'm glad I could help!
I'm happy for you that your device is working again, enjoy!!
You can use the goldcard method to downgrade the devices SPL, install XSPL and then flash a custom rom too if you want.
Take a look at Shadow's tutorial -
http://forum.xda-developers.com/showthread.php?t=1295068
Click to expand...
Click to collapse
Thanks again,bro.
I'm now using Custom Rom - Deepshining V7.8 Fully Unlocked too. :good: