Related
Hi guys, im using gingerdx and i noticed that overclock doesn't work anymore..it used to work with froyobread. Is this temporary or do i have to unlock the bootloader and flash a custom kernel..cuz that seems kind of difficult to me.
Overclock
jamezeh said:
Hi guys, im using gingerdx and i noticed that overclock doesn't work anymore..it used to work with froyobread. Is this temporary or do i have to unlock the bootloader and flash a custom kernel..cuz that seems kind of difficult to me.
Click to expand...
Click to collapse
Are you on GDX 014?
yes i am :O)
Kernel
jamezeh said:
yes i am :O)
Click to expand...
Click to collapse
Did you flash new Kernel? I believe OC module is now within the Kernel, and not in the ROM. Now that the Kernel is different, then (if you still have the module), it might be referencing a different Kernel...
Dig deeper.
In the meantime, you can flash a new ROM (MiniCM7) which is not dependant on the Kernel to use OC module.
GingerXperia it's a good rom where you can OC the procesor and Floyo by ratch it's a good option too
Ohh i got you... i wondered why it didnt work because before gingerdx i used floyo and it workd! Cheers mate!
Sent from my X8 using XDA App
nah i wont install a new rom...maybe dx will place an overclock module too...i hope!
nevermind i retought my decisions and ive decided to go with gingerxperia..overall is it faster than gingerdx?
overclock will drain your battery more faster
i will only overclock it by 33mhz..it makes a bit of difference and it doesnt affect the battery that much...
i you want over-clock only from 600MHz to 633 then you will have only a litte more points i processor score in quadrant but 2d and 3d scores will be suck.
i you want to over-clock then min must be 691MHz because the 2d and 3d scores will near the same at the 600MHz without module enabled.
Read that from 447th post
http://forum.xda-developers.com/showthread.php?t=1020313&page=45
overclocked it to 651mhz and im getting better quality in fps too! plus theres 200 points difference in the final score!
overclock works on gingerdx without kernel change
didnt work on mine :s..but anyways i installed gingerxperia and its MUCH faster than gingerdx...im not hating or anything but its the truth!
what do you mean what is your quadrant total score and 3d 2d ones?
i forgot lol..but i did a benchmark without overclock and then with the overclock and i got a better2d and 3d score..but not by much.
ok thanks but can you see improvment in the fps in games from gingerdx to gingerxperia
can someone tell me how to overclock xperia x8 while using gingerDX v012 without changing the kernel?thanks
yes i actually can see quite a difference actually!
first, dont forget to give a thanks to nims11, because of him, i can publish this kernel
this kernel MAYBE only work for [ROM]Gingercruzt V2(sonygen)[Update8/11/2011]
------------------------------ Smart boot 17 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop --------------------
Download Link for OverClock kernel (883Mhz ) smart boot 17 feature Governors
"> www.mediafire.com/?05d2zri7b8a7pye <"
use CWM, and before flashing , dont forget to mount /system first and then flash this zip file
use no-Frills for OC and I/O setting
if get unstable , please set max 806 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
Download for app ( No-frills, antutu power saver, MIUIcamera, WiredTether )
">>>> www.mediafire.com/?3ne3v721u0d08wi <<<<<"
install Manually
Feature added into kernel :
1. ext4 filesystem as default ( support ext2 and ext3 too )
2. SIO, VR, NOOP, BFQ, CFQ, DEADLINE scheduler, SIO as default ( choose with no-Frillis )
3. 17 Governors ( see POLL ABOVE ) ( choose with no-Frillis )
4. Overclock upto 883Mhz
for reference about Governor and I/O scheduler
thanks to knzo
this kernel base on cm-kernel
CyanogenMod
for Overclock reference
burstlam
If you try on other rom, just please report if work
i will update feature if i can
FOR GALAXY ACE GT-S5830B ( Brazillian User ) Thanks to traduz
go to this post
OC kernel for GT-S5830B ( Brazillian User )
It will work with all cm7 roms for ace
nims11 said:
It will work with all cm7 roms for ace
Click to expand...
Click to collapse
Thanks buddy,
works for me using grif's cm, thanks people
Forget it . You made it yourself .
Sent from my GT-S5830 using XDA App
hmm i said it works for me and it does...well most of it. The phone boots and works normally but 883 is not stable for me, i get reboots after a few seconds
^Deadly_Sin^ said:
hmm i said it works for me and it does...well most of it. The phone boots and works normally but 883 is not stable for me, i get reboots after a few seconds
Click to expand...
Click to collapse
if get unstable , please set max 806 Mhz again, enjoy
Click to expand...
Click to collapse
...................................
EmoBoiix3 said:
Forget it . You made it yourself .
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
I dont understand what are you talking about ??
sorry for my english
denzel09 said:
...................................
Click to expand...
Click to collapse
Yeah i know, i just posted my personal experience. works ok for me at 844 without any problems. thanks anyway for taking time to reply
Too cool for school!
Sent from my GT-S5830 using XDA App
Using gingercruzt v2 without latest update @883 stable for now viewing youtube videos, angry birds, camera working... dont ask about governors, they are to many now loool...
Good work
Edit: First reboot 30 min after flashing kernel
ti is a stable version???
---------- Post added at 08:53 PM ---------- Previous post was at 08:49 PM ----------
<witch is the best governor for powersave and for performence
Is there an explanation to all these governors? I know theres one for some of the more commen ones like conservative, ondemand and so an, but i knever heard about:
LiLgV2
InteractiveX
SavagedZen
Scary
Lagfree
Brazilianwax
Minmax
OndemandX
Superbad
GreaseLightning.
Does anyone have some information about them and how they work?
downloadonlyaccount said:
Is there an explanation to all these governors? I know theres one for some of the more commen ones like conservative, ondemand and so an, but i knever heard about:
LiLgV2
InteractiveX
SavagedZen
Scary
Lagfree
Brazilianwax
Minmax
OndemandX
Superbad
GreaseLightning.
Does anyone have some information about them and how they work?
Click to expand...
Click to collapse
please read link on the page one, from knzo
there is a bug when i go to cm settings the performence the maw and miw frequency it dosn't show but on setcpu it works
slaid480 said:
there is a bug when i go to cm settings the performence the maw and miw frequency it dosn't show but on setcpu it works
Click to expand...
Click to collapse
No, thats bug came from cm7 rom, not the kernel
Too bad...OC at 821mhz....not what I thought at all.Not to be rude or to flame but you said about 883 mhz in the forum thread.Maybe you should just change and say that it's just another OC kernel just like ketut's.Don't lie about the frequencies they are not yet too good controlled.
If you put in a under/overvolt it may just do the good to make our Ace reach 1ghz.
slaid480 said:
there is a bug when i go to cm settings the performence the maw and miw frequency it dosn't show but on setcpu it works
Click to expand...
Click to collapse
Good choice not implement this, for all that use oc kernel.
In this way to boot phone should use always basic default frequencies, so avoiding fake boot ;-)
---------- Post added at 08:53 PM ---------- Previous post was at 08:43 PM ----------
Dekkerlion said:
Too bad...OC at 821mhz....not what I thought at all.Not to be rude or to flame but you said about 883 mhz in the forum thread.Maybe you should just change and say that it's just another OC kernel just like ketut's.Don't lie about the frequencies they are not yet too good controlled.
If you put in a under/overvolt it may just do the good to make our Ace reach 1ghz.
Click to expand...
Click to collapse
I dont think that overVolt is possible..
squadzone said:
No, thats bug came from cm7 rom, not the kernel
Click to expand...
Click to collapse
the problem is from the kernel dude,I'm running gingercruzt V2 on ketut's kernel everyting is fine on yours dosn't show min/max frequency in performence settings
Dekkerlion said:
Too bad...OC at 821mhz....not what I thought at all.Not to be rude or to flame but you said about 883 mhz in the forum thread.Maybe you should just change and say that it's just another OC kernel just like ketut's.Don't lie about the frequencies they are not yet too good controlled.
If you put in a under/overvolt it may just do the good to make our Ace reach 1ghz.
Click to expand...
Click to collapse
Can you build the kernel??
i read many reference what the best max freq for kernel, and the 883Mhz, is enough for hardware,
so this kernel not just compile, but i read every log when build this kernel and try to fix, to minimize error mod post
if you dont like, dont use it, i just want to share, what i'm doing, and if you like, just give a thanks
maybe i can give a clue, just read below
see this code
Code:
/* MSM7201A Levels 3-6 all correspond to 1.2V, level 7 corresponds to 1.325V. */
enum {
VDD_0 = 0,
VDD_1 = 1,
VDD_2 = 2,
VDD_3 = 3,
VDD_4 = 3,
VDD_5 = 3,
VDD_6 = 3,
VDD_7 = 7,
VDD_END
};
max freq use code 7, its mean corresponds to 1.325V ( max volt )
go, and build your self,
if you know the bug,
please report, not complain
every device with same type is not same on hardware, some people can boot at 883Mhz, but some people cant, and my kernel freq 883Mhz, but not default, all people will know, if freq is bigger than default its mean OC kernel
all feature is not just add but with some modification that need by device for get best result
sorry for my english
in alfs kernel the max cpu clock is 787, i wanted to go to 806mhz.
coz ive been stable on 806mhz on STOCK kernel and now ive flashed alfs kernel but its limiting me at 787mhz -.-? help? or could i just load the module like i did with stock kernel? would it work?
my phone heated up like hell in just 15 min when i flashed 815Mhz...i used gc 8.4 then...stable at 710 Mhz....
ahhahaahhaah ..you noob : )
pls answer my question guys,
u're going off topic ==!
n1kolaa said:
ahhahaahhaah ..you noob : )
Click to expand...
Click to collapse
haha...the ics port was supergood...but im still a noob and thats a fact...so step by step learning and i learned about modules... today ive been playing with nexus rom ported to x8.....
and to the thread: by the way the alfs kernel was supergood for gdx...i havent used that rom...will xperiment this night with gdx...which rom are u using anyway???
im on gdx v20 with alfs v5.
its just that i cant seem to see the option to go above 787mhz.
is it ok to just load X8overclock by doixanh module in the rom as i already have alfs kernel that enables overclocking?
imrano1210 said:
im on gdx v20 with alfs v5.
its just that i cant seem to see the option to go above 787mhz.
is it ok to just load X8overclock by doixanh module in the rom as i already have alfs kernel that enables overclocking?
Click to expand...
Click to collapse
Flash miniCM and nAa kernel.best rom and kernel,and in overclock you can go upto 825 mhz.
Sent from my E15i using xda premium
Alfs kernel have OC module inside. No matter what rom you put on it max will be 787.
Also if you NOT delete oc/uv module from rom it will cause instability when OC.
806 Mhz .. with alfs kernel it imposibble.. why did u need higher freq, even if the 787 Mhz is pretty stable..
*Sorry for my bad english
Sent from my E15i using xda premium
oh dear, if you cant overclock more then, you cant overclock more! Its just tough luck mate
More is not a good idea for daily use... You will get some lag in multitasking..
Best for daily use (to my point of view) is 122 / 729.. More my phone was very laggy sometimes..
how to overclock in the first place?
can someone please give me the link on how to do it??
thanks!
Bah,
Go on parameters > cyanogemmod > performance > CPU : select your frequencies, check overclock and keep on boot and reboot.
If you've got the good kernel (as naA), that's all
i'm using gingerdx v22 with stock kernal
and i can OC it To 787
but i prefer 748 or 768
it's just luck!
but 748 is good,isn't it? at least for me
You can try and play with various governors,i think some go higher....
Guys, in general, there are 2 kinds of X8 concerning hardware.
If you got lucky, then you can overclock your X8 up to 806.
On the other hand, if you are unlucky (like me), then you will NEVER be able to have a stable OC over 719. It is just a matter of hardware
i could see the min and max frequency, but i can't edit it..
when i press it,it only shows a cancel button..
is it because i have a locked bootloader?
been searching yesterday about unlocking bootloader,and it's too risky(well, i've had enough rooting my x8.. LoL)..
and regarding to the governors lists,the frequencies does not changed even though i chose a different one..
needless to say, it's still 122-600Mhz..
-gab-
i'm not stupid; i know what the search button stands for!
earth android
wilbso said:
oh dear, if you cant overclock more then, you cant overclock more! Its just tough luck mate
Click to expand...
Click to collapse
or no..for me it's the same..but i use alfs and i can go up to 768mhz..in nAa i only can 748mhz..
then OP, CHANGE KERNEL!
I don't think you can overclock with stock kernel
You need to unlock your bootloader to have a custom kernel. Then you'll can overclock
signashoes007 said:
i could see the min and max frequency, but i can't edit it..
when i press it,it only shows a cancel button..
is it because i have a locked bootloader?
been searching yesterday about unlocking bootloader,and it's too risky(well, i've had enough rooting my x8.. LoL)..
and regarding to the governors lists,the frequencies does not changed even though i chose a different one..
needless to say, it's still 122-600Mhz..
-gab-
i'm not stupid; i know what the search button stands for!
earth android
Click to expand...
Click to collapse
Follow the steps in this thread (http://forum.xda-developers.com/showthread.php?t=1020313) and then you will be able to overclock your X8, even without unlocked bootloader.
if ever i did it, and somewhere in time i want to return to the old one, could i just delete this module??will the phone frequencies return to default??
boisdulait said:
I don't think you can overclock with stock kernel
You need to unlock your bootloader to have a custom kernel. Then you'll can overclock
Click to expand...
Click to collapse
Ofcourse you can overclock with stock kernel, just make sure the x8oc module is loaded before you try.
Sent from my XPERIA X8 using xda premium
signashoes007 said:
if ever i did it, and somewhere in time i want to return to the old one, could i just delete this module??will the phone frequencies return to default??
Click to expand...
Click to collapse
Yes, you can delete it, but not necessarily. You can change the frequencies manually in Settings > CyanogenMod > Performance > CPU, or you can either install SetCPU to control them, so you can keep the module if you want to overclock it again later.
I can Oc to 691mhz only ....
guess am the most unlucky here... ;(
I can overclock to 729 mhz!!
After dat phone works like a charm!!
SONY ERICSSON XPERIA X8
ACHOTJAN SEMC DEBRAND ENGINE V1.0 FINAL
bootloader unlocked ;-)
nAa -11 kernel
NIMBAH said:
Ofcourse you can overclock with stock kernel, just make sure the x8oc module is loaded before you try.
Click to expand...
Click to collapse
Yes I saw.. I should have edited my post.. but thx
Triptamine said:
Yes, you can delete it, but not necessarily. You can change the frequencies manually in Settings > CyanogenMod > Performance > CPU, or you can either install SetCPU to control them, so you can keep the module if you want to overclock it again later.
Click to expand...
Click to collapse
nice to hear that..thanks!
anyway, when I went from v22 to v23b, the x8oc.ko on the module folder has been deleted..so i guess(not really sure) that it would be deleted when you install another rom..
-gab-
earth android
well im back to izs again i tried to search but search is unavailable now.. this time i need any recommendation for best performance /smoothness / battery life ( balanced ) since im newbie for all kinds of kernels and governors stuff
thank you
Mo Chedid said:
well im back to izs again i tried to search but search is unavailable now.. this time i need any recommendation for best performance /smoothness / battery life ( balanced ) since im newbie for all kinds of kernels and governors stuff
thank you
Click to expand...
Click to collapse
I`m using Lionheart as governor / ROW as scheduler , its the best thing i found for performance / smoothness / battery life
With medium use , wifi on almost all the time , after 24 hours i have 30% battery left.
With wifi off i get 2% drain during 8 hours overnight.
Olynth said:
I`m using Lionheart as governor / ROW as scheduler , its the best thing i found for performance / smoothness / battery life
With medium use , wifi on almost all the time , after 24 hours i have 30% battery left.
With wifi off i get 2% drain during 8 hours overnight.
Click to expand...
Click to collapse
what about min and max freq? and ill change values from No-frills cpu right?
Mo Chedid said:
what about min and max freq? and ill change values from No-frills cpu right?
Click to expand...
Click to collapse
Mine are max. 1000 mhz , min 300 mhz
Yes you can change them from No Frills cpu
i tried it but didnt really notice any change in performance and also SD unmounts..i heared about diana kernel..but i dont know how to flash or install
anyone?
EDIT:
ok i managed to flash from cwm menu but i have 2 rar files v 0.2 .rar and v 2.7 max uv.rar..which is better??
Mo Chedid said:
i tried it but didnt really notice any change in performance and also SD unmounts..i heared about diana kernel..but i dont know how to flash or install
anyone?
EDIT:
ok i managed to flash from cwm menu but i have 2 rar files v 0.2 .rar and v 2.7 max uv.rar..which is better??
Click to expand...
Click to collapse
if you are on IZS by Huexxx, flash kernel Diana v0.2 from IZS v0.2 - url blog => http://huexxxtuff.blogspot.com.es/2013/01/izs-rom-links.html
copy on sdcard, reboot in recovery, flash kernel diana v0.2.zip with CWM, wait, reboot.
with nofrills, set smartass2 / row for battery life.
I'm using Lionheart + ROW and it's just perfect. I've been with Zeus's ROMs since I got my OB, but now I changed my ROM for Avatar and guess what - still using Lionheart + ROW, which made me change kernel to MackayKernel Still i think Lionheart + ROW is awesome.
YkZ_1967 said:
if you are on IZS by Huexxx, flash kernel Diana v0.2 from IZS v0.2 […] set smartass2 / row
Click to expand...
Click to collapse
Vaiet said:
I'm using Lionheart + ROW and it's just perfect. I've been with Zeus's ROMs since I got my OB, but now I changed my ROM for Avatar and guess what - still using Lionheart + ROW, which made me change kernel to MackayKernel Still i think Lionheart + ROW is awesome.
Click to expand...
Click to collapse
Both are very good governors for IZS but not all kernels have both and be very carful not all governors are the same in all kernels.
Sent from my LG-P970 using xda app-developers app
Vaiet said:
I'm using Lionheart + ROW and it's just perfect. I've been with Zeus's ROMs since I got my OB, but now I changed my ROM for Avatar and guess what - still using Lionheart + ROW, which made me change kernel to MackayKernel Still i think Lionheart + ROW is awesome.
Click to expand...
Click to collapse
+1