Database Develop

[KERNEL][MOD][CM7] Huexxx's kernel 120321-V4.1 beta ...

This is a custom kernel for Optimus Black based on CM's Sniper kernel source.
It aims to continue with knzo's previous hard work (all credits go to him) but in a progressive way.
The name of the kernel contains two different 'fields':
- The date of the latest original lge-kernel-sniper included commit. You can check at https://github.com/CyanogenMod/lge-kernel-sniper if my last kernel includes the latest commits. In negative case, post here to ask for a new up to date recompilation.
- Huexxx's version of the kernel.
Use at your own risk.
Kernel features:
Code:
# beta
##
Compiled with Linaro toolchain 4.5 (V0)
Added SIO, BFQ v2r1 and VR I/O schedulers (V0)
Enabled Deadline I/O scheduler (V0)
Set SIO as default I/O scheduler (V0)
Added InteractiveX, Smartass v2 and MinMax governors (V0)
Tuned these governors for Optimus Black (V0)
Added Lagfree and SavagedZen governors (V1)
Added and Enabled Stochastic Fair Blue Network Scheduler (V1)
Enabled TCP Veno Congestion Avoidance Algoritm (V2)
Some optimizations (V2)
Added Lazy governor from Ezekeel (V3)
Disabled interactive, conservative, ondemand, userspace and powersave governors (V3)
Disabled CFQ and VR I/O shcedulers (V3)
Set Smartass v2 as default governor (V3)
Added eRecovery to kernel package (V3)
Added support to Torch and BLN (V3)
Disabled LG DVFS to get rid of scaling issues (V3)
Tweak Deadline for flash memory devices (V4)
Set Deadline as default I/O scheduler (V4)
Removed Lazy governor (V4)
Add XZ compresion to kernel and set by default (V4)
Update jHash and add speed tweak (V4)
Added the git implementation of SHA-1 (V4)
Upgraded YAFFS2 (V4)
Added SLQB allocator and set it default (V4)
Opts and tweaks to some libs (V4)
Changed toolchain to Linaro 4.6 (V4)
Done some sysctl tweaks (V4)
Removed some debug stuff (V4)
Added cleancache and prepared ext4 to use it (V4)
Done some mm opts (V4)
Added 'autogroup' scheduling feature to CFS (V4)
Added slice by 8 algorithm to crc32.c (V4)
Added some umaro tweaks to cpu (V4)
Added some usb performance hacks (V4)
Done some net opts (V4)
Applied a lot of arm patches (V4)
Applied a lot of rcu patches (V4)
New commits from lge_kernel_sniper (V4.1)
Replaced eRecovery with gRecovery from Sergey1239 (V4.1)
Memory management values from Zeus v6 (V4.1)
Re-enabled LG DVFS (V4.1) -> Don't use SetCPU or NoFrills to auto set values on boot...
Something else for sure ...
Extra tweaks:
Code:
# beta
##
Patched libsqlite.so (V2)
Patched hosts (20111118) to avoid some ads (V4)
Patched resolv.conf to use OpenDNS (thanks to gabwerkz) (V4)
Optimal ext4 remount (V4)
Increased sdcard read ahead (V4)
Deleted libGLES_android.so to increase performance (V4)
New lighter hosts file from Zeusv6 (V4.1)
Removed resolv.conf becuase it's useless (V4.1)
Modified remount options to preserve journaling (V4.1)
Instructions:
Download this: a2a8be7f7d7ec91c133703b5b655cbda
[Optional] Check the md5sum of the downloaded file
Copy file to microSD card
Reboot into recovery
Wipe chache and dalvik-cache
Choose "install zip from sdcard" and pick the file
Reboot and enjoy
FAQ:
Code:
Q. Do I need to wipe data?
A. No, never.
Q. Do I need to flash this if I flash a new CM update/nightly?
A. Yes. Everytime you flash a new CM version, you need to reflash this.
Q. I have xxxxx ROM. Can I flash this stuff?
A. This kernel is intended to flash it over CM7 ROMs. It won't work over stock ROMs.
Q. What can we expect from this?
A. Snappier, increased internet/market page loading, USB transfer rate, etc.
Q. How can I know if I flashed it correctly?
A. Go to About Phone in settings and you should see my nick around there.
Q. How can I change governor and set it on boot?
A. Go to Settings > CyanogenMod settings > performance > CPU Settings.
Q. How can I change I/O scheduler?
A. Don't change it for now... default one is Deadline and it works very well.
Q. What governor and/or scheduler is the best?
A. Take a look at [URL="http://forum.xda-developers.com/showthread.php?t=1242323"]this[/URL] amazing post from knzo. IMHO Smartass V2 (more performance) and InteractiveX (more battery saving) are the best. It seems that new Lazy governor is working so good at Nexus S community, so you can give it a try and comment.
Q. Where can I find the source for this?
A. [url]https://github.com/Huexxx/lge-kernel-sniper[/url]
--> It's under construction right now...
Make sure to read the FAQ before asking any questions.
Regards!

--- Reserved for future use ---

thanx for the great work!

Thanks a lot... flashing it right away.

The link to download it is enabled!
To say that by some reason it doesn't set interactiveX as default governor at boot... but you can set it (or another gov) on boot via Cyanogemod Settings, SetCPU or NoFrills.
Regards!

1st thing thx for ur work i like this kernel
2nd thing : i want u to tell wt is the best settings to set for saving battery and best performance (using profiles in setcpu for example :screen off) , governor and schedulers ?
i want the max battery.
ps: i have tried InteractiveX and i got 21xx points is that good ?
edit :
i'v noticed something ,i got i call and the screen didn't wake up so i'v pressed the wake up key to answer the call :S

Trying! Thanks!
Enviado desde mi LG-P970 usando Tapatalk

Ring me again if you have more questions, glad to help.

Hello.
look at your faq, there is an error.
Huexxx said:
Q. Where can I find the source for this?
A. Q. Do I need to wipe?
A. No, never.
Click to expand...
Click to collapse
otherwise nice work from you, thank you!!!
Have a nice day.

Hi all!
First of all, thanks again knzo.
I've seen the problem awaking the screen when incoming call. In my case is a lag more than a 'no-awake' problem. I'm looking into it.
Regards!

No lag for me, works fine everything.
Enviado desde mi LG-P970 usando Tapatalk

Huexxx, try to compile with Codesourcery toolchain.
I compile with Linaro but I'm crazy and aim for performance whereas Codesourcery usually delivers the best stability.

I'm crazy too
Jokes apart, I tried with code sourcery with my first kernel compile attempt and it ended up in a bricked OB...
I'll try again in the future, but at the moment I'm goinf to stuck on Linaro 4.5 that runs guite well.
Thanks for the advice.

It is nice to read the conversation between Android Guru's...
and what can we do is just sit and waiting the updates... hehehe
+testing and report any bugs

is it applicable for stock ROMs?

Lleweraf said:
is it applicable for stock ROMs?
Click to expand...
Click to collapse
It's intended for CM7 ROMs.
Maybe it can work with stock GINGERBREAD ROMs.
Don't use it with stock FROYO ROMs.
Regards.

Works a little bit faster then stock CM kernel
Quadrant score a little better too, thank you for your work.

Huexxx said:
It's intended for CM7 ROMs.
Maybe it can work with stock GINGERBREAD ROMs.
Don't use it with stock FROYO ROMs.
Regards.
Click to expand...
Click to collapse
Thanks man! I think im gonna wait for the stable release then flash this

First post updated to V1.
Some additions and some more in the pocket...
Regards.

Huexxx said:
First post updated to V1.
Some additions and some more in the pocket...
Click to expand...
Click to collapse
Changelog of this update?
EDIT: Ooops, sorry, didn't see the (V0) and (V1)
Thanks..

[Kernel] OC kernel for S5830i and Andro-id with full feature

------------- ANDRO-ID OC KERNEL -----------------------------
------------------------------ Smart boot 15 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop with UV module --------------------
Download Link for OverClock kernel (763Mhz ) smart boot 15 feature and UV module
MOD EDIT
change * sign with dot ( . )
FLASH VIA CWM
use no-Frills for OC and I/O setting and Use antutu power saver
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
------------------------------ Smart boot 15 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop with UV module --------------------
Download Link for OverClock kernel (801Mhz ) smart boot 15 feature and UV module
MOD EDIT
change * sign with dot ( . )
FLASH VIA CWM
use no-Frills for OC and I/O setting and Use antutu power saver
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
------------------------------ Smart boot 15 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop with UV module --------------------
Download Link for OverClock kernel (868Mhz ) smart boot 15 feature and UV module
MOD EDIT
change * sign with dot ( . )
FLASH VIA CWM
use no-Frills for OC and I/O setting and Use antutu power saver
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
------------------------------ Smart boot 18 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop with UV/GPU module --------------------
Download Link for OverClock kernel (763Mhz ) smart boot 18 feature and UV/GPU module
MOD EDIT
change * sign with dot ( . )
FLASH VIA CWM
use no-Frills for OC and I/O setting and Use antutu power saver
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
This is from @Squadzone , thanks before. :good:

Overclock? To 763 MHz? This is Underclock! LOLOLOL
This post haven't sense.

+1 Qeemi...
And btw Andro-id???

limaakum said:
+1 Qeemi...
And btw Andro-id???
Click to expand...
Click to collapse
If the normal frequency is 600mhz then for sure it's not for a bcm21533 processor

who wanna brick the phone ? xD somebody wanna try it?

We hv 832mhz processor.
Sent from my GT-S5830i using xda premium

carlos9545 said:
who wanna brick the phone ? xD somebody wanna try it?
Click to expand...
Click to collapse
If it softbricks my phone, yes.
But if it hardbricks my phone, no.
Sent from my GT-S5830i using xda premium

refazta90 said:
------------- ANDRO-ID OC KERNEL -----------------------------
------------------------------ Smart boot 15 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop with UV module --------------------
Download Link for OverClock kernel (763Mhz ) smart boot 15 feature and UV module
"> http://www.mediafire.com/?ji1gotry7jia3yh <"
change * sign with dot ( . )
FLASH VIA CWM
use no-Frills for OC and I/O setting and Use antutu power saver
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
------------------------------ Smart boot 15 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop with UV module --------------------
Download Link for OverClock kernel (801Mhz ) smart boot 15 feature and UV module
"> http://www.mediafire.com/?jj12ups72r8xpyp <"
change * sign with dot ( . )
FLASH VIA CWM
use no-Frills for OC and I/O setting and Use antutu power saver
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
------------------------------ Smart boot 15 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop with UV module --------------------
Download Link for OverClock kernel (868Mhz ) smart boot 15 feature and UV module
"> http://www.mediafire.com/?e7yhpc5jnokb7ai <"
change * sign with dot ( . )
FLASH VIA CWM
use no-Frills for OC and I/O setting and Use antutu power saver
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
------------------------------ Smart boot 18 feature Governor, SIO, VR, BFQ, CFQ, Deadline, noop with UV/GPU module --------------------
Download Link for OverClock kernel (763Mhz ) smart boot 18 feature and UV/GPU module
"> http://www.mediafire.com/?61vx9id6kih66a2 <"
change * sign with dot ( . )
FLASH VIA CWM
use no-Frills for OC and I/O setting and Use antutu power saver
if get unstable , please set max 600 Mhz again, enjoy
DO IT WITH YOUR OWN RISK !!!!
This is from @Squadzone , thanks before. :good:
Click to expand...
Click to collapse
Checkout the Processor of Ace s5830i and then post man
---------- Post added at 07:43 PM ---------- Previous post was at 07:41 PM ----------
iamareebjamal said:
Checkout the Processor of Ace s5830i and then post man
Click to expand...
Click to collapse
Mod
Please close this thread too
Its for Galaxy Fit I think

DID ANY 1 TRIED DIS OVERCLOCK
I THINK
HOW COULD IT BE OVERCLOCK IF WE MADE D CPU 700MHZ?
ISNT D CPU 832MHZ?
SOME 1 TELL ME

This kernel is not for ace-i,is for galaxy fit,ok?

Moderator notified
POTATO!!!!

Thread closed. I have some serious doubts about this kernel. Also the sources haven't been provided.

(Kernel)(JB 4.2.2)(3.0.80) Nexus Kernel R11 °°14-06-2013°°..°*LINARO 4.7.4°*

​
Base Kernel Linux 3.0.80
-----------------------------------------------
Compiled with Linaro Toolchain 4.7.4 with Cortex-a9...Neon and other Optimization
-----------------------------------------------
init.d Tweaks Support
-----------------------------------------------
Governors :
Ondemand
Interactive
Performance
Powersave
Conservative
SmartAss v2
Lulzactive
HYPER
PegasusQ
AbyssPlug
Sakuractive
LulzactiveW
ktoonservative ( Thanks to ktoonsez )
AdaptiveX
ZenX
Nightmare
-----------------------------------------------
I/O-Schedulers
BFQ
CFQ
Deadline
Noop
SioPlus I/O
Row
Fifo
CPU Freq avaible...OC is Possible
150 MHZ
200 MHZ
300 MHZ
400 MHZ
500 MHZ
600 MHZ
700 MHZ
800 MHZ
1 GHZ
1.1 GHZ
1.2 GHZ
1.35 GHZ
1.4 GHZ
1.5 GHZ
1.6 GHZ
Ram Avaible = 774 mb
-----------------------------------------------
CWMR recovery
AVS (Adaptive Voltage Scaling)
Dynamic Fsync 1.1
CleanCache Driver
Neon Optimization
hardcore swappiness = 30
Frandom
BLX (use nstools)
Custom Voltage (use nstools)
-O3....Nexus....Linaro Optimization
Overclock / Underclock now is Possible
Vibrator Control ( new features from GNex )
What's Work
Call and messages
HW acceleration
USB mass
Deepsleep
Bluetooth
Camera
Audio
GPS
Ecc...
Solved SOD problem !!
WiFi
Vsync
Screen
PS: i have 9411 in bechmark with pegasusq and row 200-1300 MHZ
All version of Nexus Kernel
CHANGELOG IN THE 2 POST
Please Read Me
After install the kernel...download and install this -------> Trickster Mod it's a app for manage kernel and change governor....i/o schedular...set vibrator ...fsync....ecc...
my sources : https://github.com/biagio7xD/android_kernel_samsung_t1
CREDITs:
BIG THANKS FOR CHRISTOPHER FOR HIS HELP !!
Mnazim for full slimroms source
fuss for his help
Codeworkx for all
Ryuinferno for help me
DOOMSDAY94
Diablo55 for helped my
Christopher83 for his toolchain and his source
voku to vokulmk
cyanogen team =D
and other =))

Changelog
Code:
[FONT="Century Gothic"][SIZE="4"]Nexus Kernel R11[/SIZE][/FONT]
Update kernel to last 3.0.x
sync with cyano source
better battery-life !!
swappiness=30
arch/arm/Makefile optimization
kernel is stable now
Nexus oc version 1.1
Dynamic management of dirty page writebacks
adapted for new RIL
[FONT="Century Gothic"][SIZE="4"]NexusKernel R10[/SIZE][/FONT]
Update toolchain : switch to Linaro GCC 4.7.4 Toolchains from my friend Christopher with more optimization for cortex...arm ecc...
hardcore tweaks...
perfomance/battery are 20% better
[FONT="Century Gothic"][SIZE="4"]Nexus Kernel R9[/SIZE][/FONT]
update to 3.0.79
Added New governor
-ktoonservative ( Thanks to ktoonsez )
-AdaptiveX
-ZenX
-Nightmare
Add Fifo I/O schedular
add Tweak in page-writeback
add other fix....see my github for more details
[FONT="Century Gothic"][SIZE="4"]Nexus Kernel R8[/SIZE][/FONT]
updated to 3.0.78
added new I/O schedular : SIOPLUS ( thank boype and dtrail )
add and use SLQB
add CRC32 optimized algorithm
Added Vibrator Control ( thanks ezekeel and adapted by me for i9100G )
[U]USE TRICKSTER MOD APP FROM PLAYSTORE TO SET VIBRATOR CONTROL AND OTHER MY KERNEL TWEAKS ![/U]
[FONT="Century Gothic"][SIZE="4"]Nexus Kernel R7[/SIZE][/FONT]
[LIST]
[*]Add Dinamic Fsync 1.1 by faux
[*]add new governor : LulzactiveW - A combination of Lulzactive and Performance
[*]some optimization and tweak
[*]enabled new algorithms
[*]added -O3....Nexus....and Linaro optimization V1.0
[/LIST]
[FONT="Century Gothic"][SIZE="4"]Nexus Kernel R6[/SIZE][/FONT]
[LIST]
[*]update to 3.0.77
[*]mm/page-writeback.c: adjust dirty writeback
[*]Fix deadline & SIO read / write expiring
[*]New LowMemoryKiller Values Created by me only for nexus kernel ( aggressive parameters )
[*]Optimize Slub
[*]Added OverClock ( OC ) version 1.0 with this FREQ :
[*]1350 MHZ
[*]1400 MHZ
[*]1500 MHZ
[*]1600 MHZ
[/LIST]
[FONT="Century Gothic"][SIZE="4"]Nexus Kernel R5[/SIZE][/FONT]
[LIST]
[*]update to 3.0.76
[*]add more frequence CPU ( now we have this freq ) :
[*]- 150 MHZ
[*]- 200 MHZ
[*]- 300 MHZ
[*]- 400 MHZ
[*]- 500 MHZ
[*]- 600 MHZ
[*]- 700 MHZ
[*]- 800 MHZ
[*]- 1 GHZ
[*]- 1.1 GHZ
[*]- 1.2 GHZ
[*]extreme Undervolted Version Avaible
[*]Cortex-A9 and Graphite Optimization
[*]aumented boot speed
[*]-O3 optimization in Modules
[/LIST]
[FONT="Century Gothic"][SIZE="4"]Nexus Kernel R4[/SIZE][/FONT]
[LIST]
[*]decrease CPU transition latency to 15ms
[*]tweak page-writeback
[*]Undervolt CPU Frequence ( more battery )
[*]Tweak Hotplug for better responsive
[*]Increased Min/Max Readahead
[*]Increase Timeout Limit For Bad SDs
[/LIST]
[FONT="Century Gothic"][SIZE="4"]Nexus Kernel R3[/SIZE][/FONT]
[LIST]
[*]Update to 3.0.75
[*]add Entropy Tweaks
[*]add Frandom Support
[*]kernel: Disabled Gentle Fair Sleepers for better performance
[*]Add Custom Voltage
[*]added new governor abyssplug
[*]added new governor sakuractive
[*]BLX ( not work very well sometimes )
[/LIST]
[FONT="Century Gothic"][SIZE="4"]Nexus Kernel R2[/SIZE][/FONT]
[LIST]
[*]Return to 3.0.31 (update to 3.0.75 tomorrow)
[*]hardore swappiness = 0
[*]Tweaked dirty writeback and expire intervals for better battery life
[*]some other tweaks
[*]based n Official CM kernel with SlimRoms Source
[*]RIL problem solved
[*]CWMR Recovery
[*]COMPILED WITH LINARO 4.7 TOOLCHAIN by christopher
[/LIST]
[FONT="Century Gothic"][SIZE="4"]Nexus Kernel V1 *INITIAL RELEASE*[/SIZE][/FONT]
[LIST]
[*]based on official 3.0.31 kernel cyanogemod
[*]add 4 new governor:
[*]- PEGASUSQ
[*]- SMARTASSV2
[*]- LULZACTIVE
[*]- HYPER
[*]add VR - SIO - ROW i/o schedular
[*]add FSYNC Control ( enabled by default )
[*]add PERFOMANCE tweak by faux 123
[*]optimized memcopy and other files
[*]some battery tweak
[*]NEON OPTIMIZATION
[*]Asinchronius I/O latency
[/LIST]

nice.. more kernel for our device... gonna try this ASAP.. will report later
thanks
Edit: flashed and so far so good.
Running it on my slimbean with no error so far.. Will of course report battery use and performance
Edit2: can't get call, sms, data to work. Baseband unknown
And btw a question though, this is working on slimbean which is AOSPbased. Will it work on AOKP Based ROM too?

nice.......good job!!!!

Wow wow!!! another kernel gor I9100g!!! =) big thanks!!!

YO XD

SOD only happens on stock...how do you solve something that was not a problem at all? Btw, the kernel is still 3.0.31 based...guess you copied it from your old thread...

Can't get RIL to work.. Anyone?
Sent from my Slimbeany i9100G

zion609 said:
Can't get RIL to work.. Anyone?
Sent from my Slimbeany i9100G
Click to expand...
Click to collapse
Same here.
Sent from my GT-I9100G using Tapatalk 2

Ali6049 said:
Same here.
Sent from my GT-I9100G using Tapatalk 2
Click to expand...
Click to collapse
In settings, the 'about' section will show that "Baseband: Unknown" isn't?
It is really a great kernel so far.. Hope will be fix
Sent from my Slimbeany i9100G

RIL isn't working.

fix it in next release sorry..

biagio7xD said:
fix it in next release sorry..
Click to expand...
Click to collapse
Eager to flash it ASAP
Sent from my Slimbeany i9100G

iXanza said:
RIL isn't working.
Click to expand...
Click to collapse
same here ... can i overclock the s2 with this kernel?

Another Device supported by Team Tsunamix Developers! Great work Biagio!

biagio7xD said:
Changelog
Code:
[FONT="Century Gothic"][SIZE="4"]Nexus Kernel V1 *INITIAL RELEASE*[/SIZE][/FONT]
[LIST]
[*]based on official 3.0.31 kernel cyanogemod
[*]add 4 new governor:
[*]- PEGASUSQ
[*]- SMARTASSV2
[*]- LULZACTIVE
[*]- HYPER
[*]add VR - SIO - ROW i/o schedular
[*]add FSYNC Control ( enabled by default )
[*]add PERFOMANCE tweak by faux 123
[*]optimized memcopy and other files
[*]some battery tweak
[*]NEON OPTIMIZATION
[*]Asinchronius I/O latency
[/LIST]
Click to expand...
Click to collapse
3.0.72 based? Nah not really
More like 3.0.48
Sent from my GT-I9100G using xda app-developers app

Ryuinferno said:
SOD only happens on stock...how do you solve something that was not a problem at all? Btw, the kernel is still 3.0.31 based...guess you copied it from your old thread...
Click to expand...
Click to collapse
Sod using slimbean and default kernel!
Sent from my GT-I9100G using xda premium

That's because Slim Bean has its own kernel...

Kingspp said:
Sod using slimbean and default kernel!
Sent from my GT-I9100G using xda premium
Click to expand...
Click to collapse
Well..SlimBean never had SOD .
Just Hot Reboot and Hot Shutdown =)
That's all

if this kernel based slimbean kernel
it will be nice

[Unofficial] Boeffla Kernel Profile Sharing Thread

INTRODUCTION​
Following @Lord Boeffla's wish I decided to start a new unofficial Samsung Galaxy S5 Boeffla-Config sharing thread, similar to already existing threads for Samsung Galaxy S3 by @boyheadkick and OnePlus Onehttp://forum.xda-developers.com/oneplus-one/general/unofficial-boeffla-kernel-profile-t2998145 by @S1ay3r666.
Please read this first:
The main purpose of this thread is to share Boeffla-Config profiles for Samsung Galaxy S5 Boeffla-Kernels made by the users.
Please post your profiles on this thread providing following information:
- rom;
- purpose (battery saving, performance or balanced);
- short description;
- download link.
I will collect links to all shared profiles on Post #2
Don't ask what configuration/profile is the best - there is NON. Everybody should find his/her best fitting profile according to your set up and personal phone usage. Just read about the profiles, choose one, apply, test and decide if you keep it or not.
By applying any of shared profiles you take full responsibility of their usage.
HOW TO MAKE AND ACTIVATE A PROFILE:​
-> HOW TO MAKE A PROFILE FILE:
[1] Generate a profile file in Boeffla Config V2 app:
- open Boeffla Config V2 app;
- go to profiles ("Profile maintenance");
- tap and hold on a profile;
- Choose "EXPORT TO FILE" option.
[2] Find your "xxx.bcprofile" file in "/data/media/0/boeffla-kernel-data" folder;
-> HOW TO ACTIVATE A PROFILE FILE:
[1] Download "xxx.bcprofile" file;
[2] Put it into "/data/media/0/boeffla-kernel-data" folder;
[3] Activate the profile in Boeffla Config V2 app:
- open Boeffla Config V2 app;
- go to profiles ("Profile maintenance");
- choose "LOAD FOREIGN" option if you don't like custom CPU voltages and LKM settings to be loaded or
- choose "LOAD" option if you would like all profile settings to be loaded;
- choose downloaded profile;
- activate it in the list by tapping on it (it should be blue).
​
LINKS:​
[1] Official Boeffla-Kernel DEV thread for Samsung Stock Lollipop roms by @Lord Boeffla -> donload link for kernels, Boeffla-Config app, development related discussion;
[2] Official Boeffla-Kernel DEV thread for CM roms by @Lord Boeffla -> donload link for kernels, Boeffla-Config app, development related discussion;
[3] Most up to date guide on CPU governors and I/O schedulers by @gsstudios -> a lot of useful information one CPU governors, I/O schedulers and tuning tips;
[4] KERNELS EXPLAINED, governors, hotplug, frequency, CPU, GPU, I/O, etc by @bloof -> some more information about kernel settings.
​
Now is your turn - post your profiles!

PROFILES:
SAMSUNG:
1. @Many40 profiles:
- Many40_Battery1 profile - battery
2. @cooperke profiles:
- Daily use / impulse profile - balanced
3. @farid993 profiles:
- Daily use / lionheart profile - balanced
4. @4Smoky profiles:
- 4Smoky optimize profile - battery
5. @aeonix_05 profiles:
- aeonix_05 Performance and battery friendly config - balanced
6. @marco_wack profiles:
- marco_wack yankactive profile - balanced?​CM11:
1.
2.
3.​
CM12:
1. @1indwurm profiles:
- 1indwurm daily use profile - balanced
2. @Lord Boeffla profiles:
- Lord Boeffla daily-usage profile - balanced
3.​

- Reserved #1 -

- Reserved #2 -

Here is my Boeffla-Config profile which I'm using on a daily basis:
1. Purpose: Battery saving
2. Rom: Samsung Lolipop / Alliance v8,0;
3. Description:
- Governor: Pegasusq tweaked by me for better battery life
- I/O scheduler: Sio;
- CPU UC -> max frequency: 1728 MHz;
- Hotplug settings: Optimized;
- CPU voltages: -50mV undervolt for all frequencies;
- GPU UC -> max frequency: 462 MHz;
- Touch boost: OFF
- Logging: OFF
- The other settings - default
This gives me very good battery life without any noticeable downgrade of performance/stability of my phone -> I don't use my phone on a daily basis in "a performance-demanding way"
Important: if you experience reboots turn off undervolting as phones don't behave in the same way when undervolted.
4. Download:

Hi
I'm using alexndr odex BOE 3 rom.
Purpose : Stability and battery saving
Governor Interactive
interactive-battery
Scheduler row / row
No under volting or OC
LED fade on
touch wake on
Currently on boeffla 1.2 b4

chiacp said:
Hi
I'm using alexndr odex BOE 3 rom.
Purpose : Stability and battery saving
Governor Interactive
interactive-battery
Scheduler row / row
No under volting or OC
LED fade on
touch wake on
Currently on boeffla 1.2 b4
Click to expand...
Click to collapse
Thanks but could you export Boeffla config profile to a file and upload the link to it here?
Sent from my SM-G900F using Tapatalk 2

http://d-h.st/SYZL
This is the profile i use.
1. Purpose: daily use
2. Rom: Samsung Lolipop / stock BOB7
3. Description:
- Governor: Impulse
- I/O scheduler: BFQ
- Hotplug settings: Optimized;
- Logging: OFF
- Boost frequentie: 729
- The other settings - default

cooperke said:
http://d-h.st/SYZL
This is the profile i use.
Click to expand...
Click to collapse
Thanks but for the others who would like to try it would be useful if you provide some info about it. As an example please see my post above.
Just edit your post with profile description like described in OP.
Edit: profile linked to post #2

1. Purpose: daily use
2. Rom: Samsung Lolipop / stock BOE5
3. Description:
- Governor: lionheart
- I/O scheduler: fiops
- Readahead buffer: 1024
- GPU min: 27MHz
- The other settings: default
I really like this setting. love it!! Its great on performance and multi tasking and also has good battery life.

farid993 said:
1. Purpose: daily use
2. Rom: Samsung Lolipop / stock BOE5
3. Description:
- Governor: lionheart
- I/O scheduler: fiops
- Readahead buffer: 1024
- GPU min: 27MHz
- The other settings: default
I really like this setting. love it!! Its great on performance and multi tasking and also has good battery life.
Click to expand...
Click to collapse
Thanks. But upload (make an archive zip file before) / or post the link to your config profile file here please
Just edit your post and put the file or the link to file.

thank you for sharing i will try!

Here is my Boeffla-Config profile which I'm using daily
1. Purpose: Stable-little Battery saving
2. Rom: Samsung Lolipop / Alexander Bo6
3. Description:
- Governor: smartmax
- I/O scheduler: tripndroid
- Hotplug settings: Optimized
- CPU voltages: -25mV undervolt for all frequencies
- Touch boost: OFF
- Logging: OFF
- Led speed 8
-Led Brightness 255

Many40 said:
Here is my Boeffla-Config profile which I'm using on a daily basis:
1. Purpose: Battery saving
2. Rom: Samsung Lolipop / Alliance v8,0;
3. Description:
- Governor: Pegasusq tweaked by me for better battery life
- I/O scheduler: Sio;
- CPU UC -> max frequency: 1728 MHz;
- Hotplug settings: Optimized;
- CPU voltages: -50mV undervolt for all frequencies;
- GPU UC -> max frequency: 462 MHz;
- Touch boost: OFF
- Logging: OFF
- The other settings - default
This gives me very good battery life without any noticeable downgrade of performance/stability of my phone -> I don't use my phone on a daily basis in "a performance-demanding way"
Important: if you experience reboots turn off undervolting as phones don't behave in the same way when undervolted.
4. Download link: http://d-h.st/jMho
Click to expand...
Click to collapse
No file in the .zip got another download location ? (mirror)

ryanraven said:
No file in the .zip got another download location ? (mirror)
Click to expand...
Click to collapse
Try again from post #5
Sent from my SM-G900F using Tapatalk 2

1. Purpose: Battery saving
2. Rom: CM11;
3. Description:
- Governor: Interactive;
- I/O scheduler: Noop;
- CPU UC -> max frequency: 1958 MHz;
- Hotplug settings: Default;
- CPU voltages: -50mV undervolt for all frequencies;
- GPU UC -> max frequency: 320 MHz;
- Touch boost: 960Mhz
- Logging: OFF
- The other settings: Vnswap 820

core720 said:
1. Purpose: Battery saving
2. Rom: CM11;
3. Description:
- Governor: Interactive;
- I/O scheduler: Noop;
- CPU UC -> max frequency: 1958 MHz;
- Hotplug settings: Default;
- CPU voltages: -50mV undervolt for all frequencies;
- GPU UC -> max frequency: 320 MHz;
- Touch boost: 960Mhz
- Logging: OFF
- The other settings: Vnswap 820
Click to expand...
Click to collapse
Thanks but could you please upload (or provide a link) your profile file into your post as well?
Sent from my SM-G900F using Tapatalk 2

Best deep-sleep(0.5%/h) , performance and battery friendly config:
TW ROM
Governor: zzmove
Profile: insane
Scheduler: row
No OC
Hotplug settings: zzmove native default
No UV
GPU Governor: msm-adreno-tz
Touch boost set to 1497

aeonix_05 said:
Best deep-sleep(0.5%/h) , performance and battery friendly config:
Governor: zzmove
Profile: insane
Scheduler: row
No OC
Hotplug settings: zzmove native default
No UV
GPU Governor: msm-adreno-tz
Touch boost set to 1497
Click to expand...
Click to collapse
Thanks. Is it for Sammy rom?

Many40 said:
Thanks. Is it for Sammy rom?
Click to expand...
Click to collapse
Yes. Ill update my post

Kernel 3.10.49 [stock-tweaked][Android 4.4]

Hi. Because I use this crap phone @ work and have spare time during my shift, I decide to make this phone a little bit more better. So I compiled this kernel. I hope it will be useful to someone.​
I am not take any responsible for bricked phones or any other catastrophe encountered when you try this kernel ​
** What I change: **​
Upstrem kernel to 3.10.49
compiled with linaro's 4.9.4
some optimalization
** Note **
I spend hours try to overclock this device wihout success so I give up, I cant figure out what it wrong with it ​Kernel is base on a11ul-3.10.28-g930be6d_vodafone
Kernel works fine on desire 620 as well but you need to extract boot.img take kernel-zimage and replace in stock 620 boot.img
** Added Cpu hotplug
msm-hotplug
alucard (disabled)
bricked (disabled)
thunderplug
intelli-plug
** Added CPUFreq
zzmoove
lionfish
dancedance
lionheart
conservativex
preservative
wave
nightmare
darkness
bioshock
alucard
** Added *I/O scheduler
tripNdroid
sio+
sio
zen
fifo
vr
bfq
fiops​
** Source code **
https://github.com/jas7o/jas7o-a11ul_kernel_3.10.x_tweaked/tree/dev
** HowTo **
It is recomended to rename or delete /system/bin/mpdecision
You can test before you flash it using cmd -> fastboot boot boot.img
Flash boot.img from twrp as image or using fastboot
If wifi not work after flashing boot download pronto_wlan, extract and replace file in /system/lib/modules/pronto
Also you need reflash supersu any version​
** Download **​
hash:
f234e0717d6bf053ac5eb6cc0e212a43 boot.img
ef61a8f8f45e4d928523a02ce943f6ce modules.zip
4eb5781ff70e98a7387ecfa5eb02227b pronto_wlan.ko.zip
boot.img
https://drive.google.com/open?id=0B2SG1vOm1yHmM3E4YXlkNGpYRkk
optional modules (if someone needed)
https://drive.google.com/open?id=0B2SG1vOm1yHmX2o2SzVVRWYtTHc
pronto_wlan
https://drive.google.com/open?id=0B2SG1vOm1yHmdjN2OTZOeEtTTVE
Mirror:
boot.img
https://mega.nz/#!ck8gGAZJ!7gan4HA6oExpkySI99vqLZ-vpLcGnPxlfj7IHEwUtEA
optional modules (if someone needed)
https://mega.nz/#!s9dRxKxC!29B4gE_9Zvz8SgIY3JmpYj8Bk7t2V5jMV7arlPNYhMQ
pronto_wlan
https://mega.nz/#!lpcjmJqC!iV4ZIdXBV9Aa0FerA_AprnRtGIy5fqazlHhLYin9QJc

Reserved

Maybe dt2w?