Database Develop

[Q] Odin flash help

Dear fellow Galaxians
I have a problem..recently I flashed my Galaxy S with i9000xxjpy. This caused change of product code from TOP (Serbia) to KOR. Also, I lost Serbian swype
How to:
-stay on this version of firmware
-have Serbian swype (TOP product code)
When I flashed with Odin I only had one .tar file which I put to PDA (I didn't have separate modem and csc file).
Now, would the solution be to flash again with the same file and to separately add some Multi CSC file containing TOP product code?
Would it get back swype on Serbian ?
Thns for any help

http://www.megaupload.com/?d=HVOGTEU1 serbian swype. not sure which version. but u could try it.

Ok, but how to flash it? Can I flash it separately with odin and just that file or I have to do whole flash procedure with pda, modem and csc file?

That fails build yourself a new rom in the kitchen it has multiple CSC .
http://forum.xda-developers.com/showthread.php?t=817703
Selection of CSC for your region and operator including SMO
jje

Ok...I hope at the end it would look like a normal flash procedure, without some custom piece of junk and rooting and hacking and...
Thank you very much

I tried to install this swype version you sent but it fails....

i just googled it for you, i didnt know wether it worked or not, i would try JJEgan's method. that seems your best bet.

[Q] a question about debranding, which firmware.

hello,
my phone is branded to orange in the uk. i have been looking into this for the past 3 days.
i am now at the point where i am ready to flash with odin but i am unsure which firmware to flash with, and i have read so much info im getting my head all wrapped around the situation
basically my current firmware is
PDA:I9000 BVJS4
PHONE: I9000 BVJP4
CSC: I9000 ORAJS4
version 2.2.1
i have looked at http://www.samfirmware.com/WEBPROTECT-i9000.htm and the amount of firmware staggers me not one all i am requesting if someone would be so kind and reply saying "flash this one mate"
i may have already read the answer but i have spent 3 days trying to figure it out for myself.
it was locked to orange but i have since unlocked it. it is currently rooted.
im not particularly bothered about warranty because i can add it to my home insurance to cover loss or damage. and from what i have read the phone is difficult to brick fully,
i have the download mode already, its just a case of get the firmware and flash.
i apologise for the very long post and i hope someone can help me
thanks for reading.
EDIT: i already have a backup of the efs folder

in my opinion don't use odin only , only if you want stock or root . Go to Doc Rambone's kitchen and build yourself your desired rom . I suggest JS8 wipe (you will lose all your data) or nonwipe ( you will have crappy data from previous rom ) , select your own csc if you want APN Settings , hardcore/SuperCurio/DamianGTO(never tested this) Kernel at your own desire , an european modem , themes sounds and boot amination at your own desire and need , and at apps and tweaks choose what you think you will use. SORRY FOR CRAPPY ENGLISH ( I'm not a native English speaker and I wrote very quickly .

I agree you can choose a CSC to suit your network .
CPW CSC covers all UK networks .
XWJS8 v9.9.5 WIPE base rom
CPW csc
Hardcore's Kernel *RECOMMENDED* kernel
JPX modem
Apps choose what you want .
Themes and boot animation choose what you want .
http://romkitchen.org/sgs/?s=generator
http://forum.xda-developers.com/showthread.php?t=817703
jje

thamks guys, i have used odin to flash the new jvk firmware, (there is an app on market for my apn settings (im on giffgaff))
i have used criskelo's rom in the develeopment forum with his theme.
it really does amaze me when only 2 weeks ago i didnht know anything about odin or flashing and now i can downgrade/upgrade my firmware using odin, root it. and its all thanks to this wonderful website!
i even know how to install different themes etc and now i just installed a battery im just astounded.
there are a few other questions:
1) if i want to change my theme, can i just install it over the old one using cwm?
2) is there a thread/website etc where i can download certain mods? (ie i see a few of the themes have the market in different colours, different lock-screens, i just wondered if there was another place where i can get these from to install)
3) http://forum.xda-developers.com/showthread.php?t=934729&highlight=theme+creator i have found this but there doesnt seem to be a guide or anything, i cant get it to download the framework from my phone? i have tried in usb mode (kies and mass storage) download mode and mounting usb storage from the cwm. what i havent ried is with debugging mode on.

gazza1988 said:
thamks guys, i have used odin to flash the new jvk firmware, (there is an app on market for my apn settings (im on giffgaff))
i have used criskelo's rom in the develeopment forum with his theme.
it really does amaze me when only 2 weeks ago i didnht know anything about odin or flashing and now i can downgrade/upgrade my firmware using odin, root it. and its all thanks to this wonderful website!
i even know how to install different themes etc and now i just installed a battery im just astounded.
...
Click to expand...
Click to collapse
hi gazza1988, good to know u were able to debrand and flash the firmware through ODIN.
I also got my SGS through 3 UK. Its unlocked now.
But i am not am not able to install any apps and market is also not working. I also want to remove the branding.
My current config is :
PDA : I9000NEJP5
PHONE : I9000NEJP2
CSC : I9000HCGJP5
I want to flash to a stable stock firmware. Some people on forums suggested to flash JS8.
I downloaded I9000XWJS8 from samfirmwares.com but it has only one file - NEE.tar (which i guess is PDA file).
Will my current modem and CSC be compatible with I9000XWJS8 ?? Do i need to include .PIT file and select repartition ??

hi, if you want to debrand you will need new complete (ie 3 firmwares csc pda phone etc)
i assume you have odin already
if you want to debrand then download the jpu firmware (has all 3 files) here http://hotfile.com/dl/99955459/dea6962/I9000XXJPU.rar.html password for archive is samfirmware.com
once you have flashed that one go back into download mode and flash the NEE.tar as PDA to update to JS8.

gazza1988 said:
hi, if you want to debrand you will need new complete (ie 3 firmwares csc pda phone etc)
i assume you have odin already
if you want to debrand then download the jpu firmware (has all 3 files) here http://hotfile.com/dl/99955459/dea6962/I9000XXJPU.rar.html password for archive is samfirmware.com
once you have flashed that one go back into download mode and flash the NEE.tar as PDA to update to JS8.
Click to expand...
Click to collapse
Thanks for the quick reply man !!!
Do i also need to select PIT file and select re-partition ??
Also samfirmware has listed I9000XXJPU firmware download as 1 file only. Link
Like this :
I9000XXJPU ## | 512.PIT | Version 2.2.1 | 2010 December | DOWNLOAD | 1 file select NO .PIT
I've have started the download anyway, so lets see.
As i'm using my SGS in India, is it better to flash an Asian firmware with CSC which has info about indian networks ?? Can u tell me which Asian firmware on this page has all 3 files ?

possibly would be better to flash asian but what the effects of changing from one region to another are im not 100% may be worth startin a new topic in this forum as people are less inclined to look in here as they think my issue is being seen to by someone else.
the asian firmware for india is DD (ie I9000DDxxx so i would guess that the I9000DDJF2 would contain all 3 files to flash then you would have to flash I9000DDJP6 to get indian stock froyo firmware. but i would ask a more experienced person about moving regions i was a noob at this 2 weeks ago.
i am 90% certain that flashing indian firmware would debrand and enable the market, it may be worth adding a post to this thread detailing what you have now and what you would like (ie branded uk firmware to stock indian firmware - it may also be worth asking if you can use european firmware with a indian csc as i have read the indian froyo is not very good)
the reason you cant download apps from the market would be your location (ie the phone's firmware is 3 UK and you are in india so it get "confused". do you have 3g connectivity.
i have researched some of this and the CSC (country specific code) is what holds the apn settings etc so you would need an indian csc

gazza1988 said:
... do you have 3g connectivity ...
Click to expand...
Click to collapse
Yes, i have 3g, but not able to sign in to google account even with 3g. And the strange part is that i can't even directly install most of the apk files. Adobe flash player apk didn't install. Even asphalt 5 didn't install. I was able to install Winamp for android. I downloaded many apks for the internet (some of them specifically packed for SGS) but 99% of them don't install on my SGS.
I have started this thread, so lets see.
Is I9000XXJPU a Unbranded firmware ?? I think we can safely assume that if I9000XXJPU firmware is designed for factory unlocked phones sold by samsung in Europe when i could solve the market issues. And i can manually enter the APN settings of my network. The issue currently i think is the 3 UK crap.

[Q] I need help in flashing through ODIN !

I posted a question yesterday about my android Market not working. I tried every possible thing but I cant get it to work.
So now i'm thinking to install apk files manually through droid explorer. I was able to install some apps by download the apk from internet and using batch installer in droid explorer. But I cant install Flash Player and Asphalt 5. It shows Failure - Invalid APK.
My SGS is from 3 UK and i'm using it in India after unlocking it.
http://img402.imageshack.us/i/droidexplorererror.png/

harshshah0589 said:
I posted a question yesterday about my android Market not working. I tried every possible thing but I cant get it to work.
So now i'm thinking to install apk files manually through droid explorer. I was able to install some apps by download the apk from internet and using batch installer in droid explorer. But I cant install Flash Player and Asphalt 5. It shows Failure - Invalid APK.
My SGS is from 3 UK and i'm using it in India after unlocking it.
try this apk hope this helps. and you can go for asphalt6 rather than 5..its better.
cheers!
Click to expand...
Click to collapse

zippy36 said:
try this apk hope this helps. and you can go for asphalt6 rather than 5..its better.
cheers!
Click to expand...
Click to collapse
Not working
I had a SGS (Official unlocked Indian version) in Nov 2010 and it had stock 2.1 . Everything used to work properly on it.
But why is this SGS having problems ? Is it that the v2.2 has bugs ? Or is it because i'm using an 3 UK unlocked phone, as it has 3 branding ?
Can I flash the phone with an official Indian(or any other clean) ROM ? Can it solve these Market and invalid Bugs ? Because the hardware platform is same on both, I suppose !

SGS Tools market fix try .
jje

harshshah0589 said:
Not working
I had a SGS (Official unlocked Indian version) in Nov 2010 and it had stock 2.1 . Everything used to work properly on it.
But why is this SGS having problems ? Is it that the v2.2 has bugs ? Or is it because i'm using an 3 UK unlocked phone, as it has 3 branding ?
Can I flash the phone with an official Indian(or any other clean) ROM ? Can it solve these Market and invalid Bugs ? Because the hardware platform is same on both, I suppose !
Click to expand...
Click to collapse
Can you download Asphalt 5 from Samsung Apps which is installed by default?
else you can flash a JVK ROM (2.3.3) or JS8 ROM (2.2.1 stable) if you dont have many apps? I used these ROMS and its working fine. I live in India too.

harshshah0589 said:
Not working
I had a SGS (Official unlocked Indian version) in Nov 2010 and it had stock 2.1 . Everything used to work properly on it.
But why is this SGS having problems ? Is it that the v2.2 has bugs ? Or is it because i'm using an 3 UK unlocked phone, as it has 3 branding ?
Can I flash the phone with an official Indian(or any other clean) ROM ? Can it solve these Market and invalid Bugs ? Because the hardware platform is same on both, I suppose !
Click to expand...
Click to collapse
Flash a stock firmware lik js8. You can gwt it from samfirmware and after that try darkys rom v9.5 dat shud do it. U can find darkys rom in the android development forum. Yes you can instal an indian firmware which wkll also remove the uk branding and all bloatware on the phone. Hope it helps
Cheers!
Sent from my GT-I9000 using XDA App

lycan_codex said:
Can you download Asphalt 5 from Samsung Apps which is installed by default?
Click to expand...
Click to collapse
I can't . It didn't come installed by default and when i try to install it from Samsung Apps, the file get downloaded but the installation fails saying - 'Application not installed'
lycan_codex said:
else you can flash a JVK ROM (2.3.3) or JS8 ROM (2.2.1 stable) if you dont have many apps? I used these ROMS and its working fine. I live in India too.
Click to expand...
Click to collapse
Do u have an Indian version ? Is it possible that the hardware is different ? Or maybe the market sends info about the phone by giving IMEI, etc. and then it may be blocking my access as i have unlocked the phone ?
Where can I download the *stock* JS8 firmware and also get it's instructions, as I have never flashed a firmware manually before.

zippy36 said:
Flash a stock firmware lik js8. You can gwt it from samfirmware and after that try darkys rom v9.5 dat shud do it. U can find darkys rom in the android development forum. Yes you can instal an indian firmware which wkll also remove the uk branding and all bloatware on the phone. Hope it helps
Cheers!
Click to expand...
Click to collapse
I want to install the *stock* JS8 *indian* firmware. I went to samfirmware.com and under i9000 firmwares > Asia I found entry of 'I9000ZSJPJ'. Is it the stock Indian firmware ? Where can I find the detailed instuctions ? Is darkys rom a custom rom or ... ?? Sorry don't have much idea about firmware and/or rom. I mean how are they related and what is the version compatibilty required among them ? I am new to the firmware flashing scene so I would be glad if you all can help me !! Cheers !!!

harshshah0589 said:
I want to install the *stock* JS8 *indian* firmware. I went to samfirmware.com and under i9000 firmwares > Asia I found entry of 'I9000ZSJPJ'. Is it the stock Indian firmware ? Where can I find the detailed instuctions ? Is darkys rom a custom rom or ... ?? Sorry don't have much idea about firmware and/or rom. I mean how are they related and what is the version compatibilty required among them ? I am new to the firmware flashing scene so I would be glad if you all can help me !! Cheers !!!
Click to expand...
Click to collapse
Yes that is an indian firmware but i recomemd you to try js8 firmware. U can get odin frkm samfirmware only and after downloading the firmware you can flash it through odin. First download the js8 firmware from the asia section i guess! And yeah darkys rom is a custom rom!
Sent from my GT-I9000 using XDA App

zippy36 said:
Yes that is an indian firmware but i recomemd you to try js8 firmware. U can get odin frkm samfirmware only and after downloading the firmware you can flash it through odin. First download the js8 firmware from the asia section i guess! And yeah darkys rom is a custom rom!
Click to expand...
Click to collapse
Thanks man ! You are helping me a lot !
I have downloaded the I9000XWJS8 firmware and ODIN v 1.8 from samfirmware. Now, could you please guide me further in detail about the flashing process ? Do i need to select ony PDA file ? Or PIT file also ? Do i need to check the repartition check box ?
My SGS is currently on : (Got info using *#1234#)
PDA : I9000NEJP5
PHONE :I9000NEJP2
CSC : I9000HCGJP5
Build Info : 2010. 11
I also verified that my SIM lock and Network lock is OFF by *#7465625#

harshshah0589 said:
Thanks man ! You are helping me a lot !
I have downloaded the I9000XWJS8 firmware and ODIN v 1.8 from samfirmware. Now, could you please guide me further in detail about the flashing process ? Do i need to select ony PDA file ? Or PIT file also ? Do i need to check the repartition check box ?
My SGS is currently on : (Got info using *#1234#)
PDA : I9000NEJP5
PHONE :I9000NEJP2
CSC : I9000HCGJP5
Build Info : 2010. 11
I also verified that my SIM lock and Network lock is OFF by *#7465625#
Click to expand...
Click to collapse
Unzip the js8 firmware you downloaded. You will see that there are three files pda file modem file and csc file.
If u bave the 502.pit file included use that or download the 502.pit file from samfirmware. Now open odin and then in the pit select 502.pit file. In the pda selct the pda file which you got after unzipping the js8 firmware. In the phone select the modem file and in csc select the csc file. Select repartition in odin.
Now put ur fon in download mode and wen it goes intk download connct it to the pc. Remebr to open odin on pc before you conect the phone. After you have connected the fon u will find lines appering in odin stating that the phone has been detected. After that press start and then wait for your phone to flash!
Sent from my GT-I9000 using XDA App

zippy36 said:
Unzip the js8 firmware you downloaded. You will see that there are three files pda file modem file and csc file.
If u bave the 502.pit file included use that or download the 502.pit file from samfirmware. Now open odin and then in the pit select 502.pit file. In the pda selct the pda file which you got after unzipping the js8 firmware. In the phone select the modem file and in csc select the csc file. Select repartition in odin.
Now put ur fon in download mode and wen it goes intk download connct it to the pc. Remebr to open odin on pc before you conect the phone. After you have connected the fon u will find lines appering in odin stating that the phone has been detected. After that press start and then wait for your phone to flash!
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
In the zip file there was one tar file : NEE.tar
When I extracted the tar file I got 5 files :
cache.rfs
factoryfs.rfs
modem.bin
param.lfs
zImage
Which three files should I select in ODIN ??

Someday plz help
Someday plz help
Should I start the flashing process ?
I'm afraid i'll brick the phone !
Somebody plz verify which files should I select ?
Should I do a hard factory reset ? Will it lock the phone again ?
Or a soft factory data reset is ok ?
Do i have to debrand the phone first ? Like through the kies registry patch ? I has 3 UK branding.
Current software config is :
PDA : I9000NEJP5
PHONE :I9000NEJP2
CSC : I9000HCGJP5
Build Info : 2010. 11
I downloaded the I9000XWJS8 firmware from samfirmwares.com and it has the following files :
cache.rfs
factoryfs.rfs
modem.bin
param.lfs
zImage
Which of these are the PDA, Phone and Modem files ??

You downloaded a single file XWJS8
YES
What the f8888 you are doing extracting the files for .
Think you need to read all the FAQs before you do anything at all .Your last post does not make much sense . Read and learn and start at the beginning not the middle .
jje

JJEgan said:
You downloaded a single file XWJS8
YES
What the f8888 you are doing extracting the files for .
Think you need to read all the FAQs before you do anything at all .Your last post does not make much sense . Read and learn and start at the beginning not the middle .
jje
Click to expand...
Click to collapse
jje, Read the post above which member zippy36 made :
zippy36 said:
Unzip the js8 firmware you downloaded. You will see that there are three files pda file modem file and csc file. ....
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Also you can read he has clearly mentioned that there will be three files in my download. So I was a bit confused.
So should I select the NEE.tar as PDA file and check repartition and just hit the flash button ??

I'm willing to install I9000XWJS8 on my SGS
Is I9000XWJS8 compatible with PHONE : I9000NEJP2 and CSC : I9000HCGJP5 ??
Sorry i'm new to the flashing scene, i'm trying to learn as much as I can from google search and this xda forums. I would be glad if you all can help me further.

harshshah0589 said:
I'm willing to install I9000XWJS8 on my SGS
Is I9000XWJS8 compatible with PHONE : I9000NEJP2 and CSC : I9000HCGJP5 ??
Sorry i'm new to the flashing scene, i'm trying to learn as much as I can from google search and this xda forums. I would be glad if you all can help me further.
Click to expand...
Click to collapse
Sorry for the late reply man gt busy wid sm work man..newyz listn nw wen u unzipped the firmware you gt nly the pda file dats completly olrit.
You can find a compatible modem hand the appropiate csc file which you can find in xda man. Download the files and il help you further man.
Cheers!
Sent from my GT-I9000 using XDA App

zippy36 said:
Sorry for the late reply man gt busy wid sm work man..newyz listn nw wen u unzipped the firmware you gt nly the pda file dats completly olrit.
You can find a compatible modem hand the appropiate csc file which you can find in xda man. Download the files and il help you further man.
Cheers!
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I downloaded I9000XXJPU firmware which has all - PDA, MODEM, CSC, PIT, ODIN exe.
Should I go ahead with the flash ?? As my phone is currently on MODEM - I9000NEJP2 and CSC - I9000HCGJP5 which are 3 UK customized do u think there should be any issues ?

harshshah0589 said:
I downloaded I9000XXJPU firmware which has all - PDA, MODEM, CSC, PIT, ODIN exe.
Should I go ahead with the flash ?? As my phone is currently on MODEM - I9000NEJP2 and CSC - I9000HCGJP5 which are 3 UK customized do u think there should be any issues ?
Click to expand...
Click to collapse
Yeah dats perfect. You can go ahead with the flash. Open odin put the pda gile in pada csc file in csc and in thw phone put the modem file.select 512 as the pit file. Select repartition to avoid issues. And then put ur fone in download mode and flash. Remember to open odin on pc before you connect the phone to the pc. Phone should be jn download mode. Hope you flash this time.
Cheers!
Sent from my GT-I9000 using XDA App

zippy36 said:
Yeah dats perfect. You can go ahead with the flash. Open odin put the pda gile in pada csc file in csc and in thw phone put the modem file.select 512 as the pit file. Select repartition to avoid issues. And then put ur fone in download mode and flash. Remember to open odin on pc before you connect the phone to the pc. Phone should be jn download mode. Hope you flash this time.
Cheers!
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Seems like my SGS doesn't support recovery & download modes.
I first held volume UP + Home button. Then while pressing them I also pressed the power button. The phone runs in SGS logo boot loop if i keep them pressed. I searched on forums, i found that we have release the power button as soon as SGS logo shows up. I did so and the phone boots up normally. Is my method wrong or the recovery & download modes could be really locked ?
Should I attempt that bootloader fix for enabling these 2 modes ? How safe is that ?

[Q] fallback to stock-firmware P-1000 - German

Hello,
I do have a problem:
can someone help me? I do need an image for a stock-firmware-fallback ... one wich is old would be perfekt, What I keep in mind is, that kies is recognizing an old firmware-version and is going to update to the latest (known by kies) ...
I would be happy if the image would include the PIT-File, PDA - File, Phone - File and the CSC-File
My Tab is a P1000 - German - FCCID A3LGTP1000

Look up the the JK5 firmware. That was the older Firmware that came with DBT German tab. If you want the oldest. I think it was the JJ4.

DarkPal said:
Look up the the JK5 firmware. That was the older Firmware that came with DBT German tab. If you want the oldest. I think it was the JJ4.
Click to expand...
Click to collapse
many thanks - this helps me with the first part - which firmware to choose
- but not the second part - where to find.
samfirmware do have a file - but there is no odin-part to update PDA - File, Phone - File and the CSC-File
please tell me where to find ... my google leads to nowhere ....

Hi,
okey - now I know, that I don't need the CSC & co
I tried:
jk5 - didn't work - always writing errors
JK4 - not available on samfirmware
JK2 - did not work also ....

[Q] Q : how to flash samfirmware tar file ?

hi every one
i just downloaded il orange rom 2.3.3 from sammobile i tried million times to flash it with odin , odin every time says pass but the i9000 just still booting .
i tried to remove the battery , to use pit file with the rom , to flash with defferent odin versions but it still the same , odin says pass but the phone booting all the time .
the rom is a tar file .
( every else rom "not tar file" working fine , but i need to flash the original rom )
any body can help me please ?

Download this guide. It is a direct link from the sammobile site.
How long are you waiting for the phone to start up. If you aren't waiting up to 30mins it is not long enough.
You should receive all the files required within the .zip file you downloaded from sammobile.com. If it was a single .tar file put it in PDA, if it is .pit file as well use that as well.
Does that help?

thank you , but i waited more than 30 min until the phone had become very hot then i feared to broke it .
it's a single tar file , should i use pit file with it ?
( in the guide samsung explains how to flash with non single file rom )

If the pit file came with the package then yes use it!
Can you give me a link to the rom you downloaded, and a link to the page you saw the list of firmwares for you.
What rom were you using before?
Also copy and paste what is says when you finish flashing, a screenshot would probably be better.
And lastly have you tried another computer?

F.M.K said:
3. i tried another original roms like cellcom rom its the same , but another roms like 2.3.6 and ics working just fine only the roms from sammobile do this to me .
4. i don't know how to take screen shoot of the mobile.
Click to expand...
Click to collapse
Make sure re-partition was ticked when you use the pit file.
Is there any reason you need a stock rom??
Ok it could be a bug with that FW somehow, try the links here
If the link is not there or after you try and flash the above rom and you still want to install the FW from sammobile then try after using the most similar firmwares above.
Finally if all that still doesn't work then download and install this.
Hopefully after installing that you can install the original. Or just stay with one of the other original roms above. I don't think having a carrier version of the rom is that important, but you know better than me because I assume it is important in your country.
If you do decide to stick with any of the firmware above then make sure you type in *#262*your imei# and select your correct csc code (3 letter code). Changing the selected code will reboot and factory reset your phone!

Talon26 said:
Make sure re-partition was ticked when you use the pit file.
Is there any reason you need a stock rom??
Ok it could be a bug with that FW somehow, try the links here
If the link is not there or after you try and flash the above rom and you still want to install the FW from sammobile then try after using the most similar firmwares above.
Finally if all that still doesn't work then download and install this.
Hopefully after installing that you can install the original. Or just stay with one of the other original roms above. I don't think having a carrier version of the rom is that important, but you know better than me because I assume it is important in your country.
If you do decide to stick with any of the firmware above then make sure you type in *#262*your imei# and select your correct csc code (3 letter code). Changing the selected code will reboot and factory reset your phone!
Click to expand...
Click to collapse
first of all thanks to you for helping me
second : i need afirmware with arabic , hebrew & english interface build in - only the il original one have this .
third : there is 3 providers in israel cellcom pelephone & orange , orange have a special band not like the others & this is the provider i use .
4. all the non original roms and ics's have too much problems , like radio dosn't work , low signal , market unfotunetly stoped , Restarts suddenly.

If you have a special band are you sure you have the i9000?? Is it another version of i9000 like i9000T or something. Check your box or the back of your phone after taking out the battery.
Again have you checked the firmware here it is the original firmware. It has JV9 firmware and therefore probably has your languages.. and once the correct csc is in and your APN is correct all should be fine.
This is all assuming that your phone is actually gt-i9000 not another variant.
Also the links i provide are generally quite stable and so have little or no bugs. For example this is known to be quite stable. However i am not sure about the languages..
Just found this link click by searching for the firmware name in google
And then if that doesn't work then you are not meant to have that update. Use the link for the firmware called I9000JHJV8 on sammobile, it is the earlier firmware however should fit your requirements. After setting the CSC and apn attach it to your computer with Kies and it will update to the latest.

Talon26 said:
If you have a special band are you sure you have the i9000?? Is it another version of i9000 like i9000T or something. Check your box or the back of your phone after taking out the battery.
Again have you checked the firmware here it is the original firmware. It has JV9 firmware and therefore probably has your languages.. and once the correct csc is in and your APN is correct all should be fine.
This is all assuming that your phone is actually gt-i9000 not another variant.
Also the links i provide are generally quite stable and so have little or no bugs. For example this is known to be quite stable. However i am not sure about the languages..
Just found this link click by searching for the firmware name in google
And then if that doesn't work then you are not meant to have that update. Use the link for the firmware called I9000JHJV8 on sammobile, it is the earlier firmware however should fit your requirements. After setting the CSC and apn attach it to your computer with Kies and it will update to the latest.
Click to expand...
Click to collapse
all the links you gave me is the same of sammobile firmware , the same files , only the darky that is very nice one its working fine i think but not the original one .
thank you

http://forum.xda-developers.com/showthread.php?t=1102881
Above link is a thread on xda, that has stock firmware... find one you want the same one if you can...
http://samsung-updates.com/gt-i9000-samsung-galaxy-s/
Is a link to list that has same firmware you are trying to use from sammobile.
The reason i am giving you these links is because the files that you downloaded from sammobile.com may be corrupted. These are alternative links of the SAME firmware but different files.
Finally if these do not work and you have the same outcome that the phone does not boot. Then download and install the firmware called I9000JHJV8 on sammobile.com. It is the earlier firmware however should fit your requirements. After setting the CSC and APN connect your phone to your PC. Use Samsung Kies to update your phone.

Talon26 said:
http://forum.xda-developers.com/showthread.php?t=1102881
Above link is a thread on xda, that has stock firmware... find one you want the same one if you can...
http://samsung-updates.com/gt-i9000-samsung-galaxy-s/
Is a link to list that has same firmware you are trying to use from sammobile.
The reason i am giving you these links is because the files that you downloaded from sammobile.com may be corrupted. These are alternative links of the SAME firmware but different files.
Finally if these do not work and you have the same outcome that the phone does not boot. Then download and install the firmware called I9000JHJV8 on sammobile.com. It is the earlier firmware however should fit your requirements. After setting the CSC and APN connect your phone to your PC. Use Samsung Kies to update your phone.
Click to expand...
Click to collapse
i thing you are not understanding me , the proccess of flashing the phone completes just fine and the phone start booting but it still booting ( the booting animation working fine ) it get not into the system .
i think the problem is the single tar file because all the roms with three files and icses working fine .
if there is a way to un.tar the file and made from it 3 md5 files to flash with odin maybe it will works.

F.M.K said:
i thing you are not understanding me , the proccess of flashing the phone completes just fine and the phone start booting but it still booting ( the booting animation working fine ) it get not into the system .
i think the problem is the single tar file because all the roms with three files and icses working fine .
if there is a way to un.tar the file and made from it 3 md5 files to flash with odin maybe it will works.
Click to expand...
Click to collapse
You are right I wasn't understanding...
http://forum.xda-developers.com/showthread.php?t=965190
This is a guide to repackage the tar file...

Talon26 said:
You are right I wasn't understanding...
http://forum.xda-developers.com/showthread.php?t=965190
This is a guide to repackage the tar file...
Click to expand...
Click to collapse
you are very kind person . thank you very much . thats it .
every thing works fine .