Database Develop

CM7 on 2.3.5 JVS?

Hey,can I install CM7 nightly over darky's 2.3.5 BETA?
or should i downgrade to 2.2?

Just wipe the data and install the new nightly from recovery.
Sent from my GT-I9000 using xda premium

thanks man,+1

Is it better to do the wipe data/battery stats/hard reset/factory reset before or after flashing ROM?

dilerus said:
Is it better to do the wipe data/battery stats/hard reset/factory reset before or after flashing ROM?
Click to expand...
Click to collapse
Before flashing the new ROM, to give it a clean slate.
Sent from my GT-I9000 using xda premium

stuck at boot animation

help me plz i was trying to install dark theme , the instruction said : clear cash , dalvik , flash the theme
i did that now i'm stuck at the boot animation tried to full wipe the phone and nothing help me plzz
i have paranoidandroid v0.5

Warnahly said:
help me plz i was trying to install dark theme , the instruction said : clear cash , dalvik , flash the theme
i did that now i'm stuck at the boot animation tried to full wipe the phone and nothing help me plzz
i have paranoidandroid v0.5
Click to expand...
Click to collapse
Have performed a full wipe in ICS? Try flashing a stock gb Firmware with odin and do a full wipe, then re root and flash the ROM.
Or if You still have CWM You can flash abyss kernel, reboot recovery and then re flash the ROM.

glevitan said:
Have performed a full wipe in ICS? Try flashing a <a class="inlineAdmedialink" href="#">stock</a> gb Firmware with odin and do a full wipe, then re root and flash the ROM.
Or if You still have CWM You can flash abyss kernel, reboot recovery and then re flash the ROM.
Click to expand...
Click to collapse
+1
Thanks
and btw another thing my note gets really hot
what should i do ??

Warnahly said:
+1
Thanks
and btw another thing my note gets really hot
what should i do ??
Click to expand...
Click to collapse
Undervolt it using Tegra Overclock or any other utility...
I strongly recommend to check the instructions before u do the same as it can have bad impact on your device as well..

From where i can get download abyss kernel for gnote ics rom.... Can i use it with cm9
Sent from my GT-N7000 using xda app-developers app

parryjassal said:
From where i can get download abyss kernel for gnote ics rom.... Can i use it with cm9
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1362424
Sent from my GT-N7000 using XDA Premium App

I am not finding suitable answer in this link... Plz help
Sent from my GT-N7000 using xda app-developers app

parryjassal said:
I am not finding suitable answer in this link... Plz help
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
abyss kernel is GB, for u to stay safe during the wipe. The usual procedure is to flash abyss from CWM, reboot recovery (not the device), do a full wipe and then immdiately flash a custom rom.
CM9 has a safe kernel as is compiled from source and not from Samsung kernel release as some other custom roms do....just read the dev's threads. Take into consideration that not all custom kernel works with custom roms. Make sure that u choose matching pairs!...:good:

You can safely format data in cwm on cm9 kernel. However I suggest that you should reflash PA 0.5

parryjassal said:
I am not finding suitable answer in this link... Plz help
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Suitable answer? Lol i think u dunn knw exactly wht u r searching for....
Sent from my GT-N7000 using XDA Premium App

Back to ics from jb?

im on jellybean (PA) and i want to go back to Alliance ics (samsung ics). Can i just go into recovery full wipe and flash the ROM? Or should i do sth different. i dont want to brick for nothing.
Sent from my GT-N7000 using xda premium

jenizaro said:
im on jellybean (PA) and i want to go back to Alliance ics (samsung ics). Can i just go into recovery full wipe and flash the ROM? Or should i do sth different. i dont want to brick for nothing.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Yes you can, but i assume that u r rooted, so the best way is to flash abyss kernel using mobile odin or CWM. just to be 100% safe, and perform a full wipe, then install whatever u want, u may also format system partition to get 100% clean install
Sent from my GT-N7000 using xda premium

[Q] Xperia ICS V2 for X8

hi.
i download xperia ics v1 and its good but have some bug
in v2 publisher fix that bug but when i install the rom
it dose not boot.
and freez at xperia logo.
why????
and it does not have Ultra Brightness.
how can i add it into the rom??

Are you sure you installed it right?
Full wipe?
Right kernel?
xx15 baseband?
Sent from my X8 using xda premium

If you didnt full wipe then you will have the boot stuck problem..
(Assuming that you did all the other steps correctly)

ans
stamatis16 said:
Are you sure you installed it right?
Full wipe?
Right kernel?
xx15 baseband?
Sent from my X8 using xda premium
Click to expand...
Click to collapse
before i installed V1 of this rom .
and in V2 i install it same.
wipe /cache
wipe /data
wipe /sd-ext
wipe /system
wipe/ dalvik-cache
and kernel nAa ICS 4
and when i unlock the bootloader and .... it means baseband 15.
but it stop is XPERIA logo

Unlocking bootloader doesn't necessary mean xx15 baseband.
Have you fix your bootloop now?are you on stock?
Go to "about phone" and see what it tells. If it isn't 15 upgrade it with pccompanion
Have you ever flashed any custom rom before?
Sent from my X8 using xda premium

I install v1 and all goog!!! but I install v2, freeze and reboot in Setup Wizard
Wipe Data
Wipe Dalvik cache
Format /system
kernel nAa - ics -04

monsluid said:
I install v1 and all goog!!! but I install v2, freeze and reboot in Setup Wizard
Wipe Data
Wipe Dalvik cache
Format /system
kernel nAa - ics -04
Click to expand...
Click to collapse
You mean when you set up your email?,maybe there is a problem with the rom,try another
Sent from my X8 using xda premium

yes its baseband 15 and this is not my first custom rom.
my kernel is naa ics and not stock.
i do all wipe.
i have no problem whit other rom and v1 of this rom
but it occur just in v2

stamatis16 said:
You mean when you set up your email?,maybe there is a problem with the rom,try another
Sent from my X8 using xda premium
Click to expand...
Click to collapse
Yes, I'm using ICZaraky and all is good!!! I Think the problem is in the Rom
Sent from my E15i using xda app-developers app

I suggest you guys that first you flash gingerbread and after a little experience of it, go to ICS...

Ok guys,If you are sure that you are doing the installation right then there may be a problem with the rom,wait for an update and meanwhile try another rom
Sent from my X8 using xda premium

suggest
version 1 was stable, not sure wtz wrong with Version 2, is there any way to resolve head set plug in detect issue in Version 1 ??

Problems here...

Hey guys... so, I wanted to install cm9 on my phone. And this is what I did. I flashed Naa ics kernel, and tried to flash minicm9 . I did a full wipe. And it didn't work. The log said something about I16. I don't know.
So,ive read that I should flash minicm 3.0.4 and wipe nothing then flash 3.0.5. And,no luck.
Please guys,I really need help. Please.
Thanks in advance.
Sent from my E15i using xda premium

Hmmm.
Did you first format /system before flashing the rom??
sent from my phone using hands and brain...

I did
Sent from my E15i using xda premium

DeHuMaNiZeD said:
I did
Sent from my E15i using xda premium
Click to expand...
Click to collapse
Rom Installation aborts?
If yes this may cause by removing build.prop(or localprop), flash another rom (gingerbread recommended) then do wipes & try installing cm9 again.
Report result
#no need to run Ginger rom after installation, remove it in recovery
Sent for xda via tapatalk
# always wear your seat belt as it saved my life yesterday