SOlved DELETE THREAD please :D - Galaxy Ace S5830 Q&A, Help & Troubleshooting

so i wanted to flash a new ace firmware with odin
however
its not a
apboot
modem
pda
csc
zip file
only file what is inside
are
S5830XWKTQ_S5830OXXKT4_S5830XWKT8_HOME.tar.md5
and
SS_DL.dll
how can i flash this rom ?
all i found is how to flash roms with pda modem
csc
and boot
now how to flash that
gimme guide please

CoolCatGetHome said:
so i wanted to flash a new ace firmware with odin
however
its not a
apboot
modem
pda
csc
zip file
only file what is inside
are
S5830XWKTQ_S5830OXXKT4_S5830XWKT8_HOME.tar.md5
and
SS_DL.dll
how can i flash this rom ?
all i found is how to flash roms with pda modem
csc
and boot
now how to flash that
gimme guide please
Click to expand...
Click to collapse
This is a one package rom, select the ops file, extract the md5 file, check one package in odin (top left), select the file (bottom right)
And click start.
Sent from my GT-S5830 using Tapatalk 2

(Frank) said:
This is a one package rom, select the ops file, extract the md5 file, check one package in odin (top left), select the file (bottom right)
And click start.
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
Extract md5 file ?
Then it gives me the ammss
And system.rfs
Boot.img
Etc
Sent from my GT-S5830 using xda premium

Dont extract the md5.
Let it be that way. Select it and flash as mentioned above.

thanks
flashed my rom

Related

[Q] How-to convert Kies ROM to Odin package

Hello everyone,
I have a ZIP file downloaded using Kies and saved with Kies Patcher.
How can I create a ODIN package?
Link: Hotfile - JP5_JP4_JPP_TIM.zip
99 views & no reply? LOL.
@OP, Extract the contents using a unzipper like winrar or 7zip. tell me the contents.
Also tell me where you downloaded it from.
Curious aswel!!!
ragin said:
@OP, Extract the contents using a unzipper like winrar or 7zip. tell me the contents.
Also tell me where you downloaded it from.
Click to expand...
Click to collapse
Here's the content. I downloaded it from Kies. It's the official package of Froyo for italian branded TIM smartphones
Thank you!
Did you find a tar file in the zip? Use that
Sent from my GT-I9000 using XDA App
Its the file allready ready for Odin?? just put the file in PDA section and flash. Ihave seen many files that is just .zip files and u dont exract the .zip file because its ready for ODIN for flash
if you take a look at this official thread and the roms all of them I downloaded are just .zip file and ready to flash....please correct if im wrong.
http://forum.xda-developers.com/showthread.php?t=846913
The extracted files from zip u can use to flash in a iMac/macbook and heimdall app.

Help Using Odin To Upgrade Stock Firmware

I would like to upgrade my stock firmware to KL4 using Odin and am unsure if I need a Pit file or will the tar file be all that I need. Also, do I need to select "Re-Partition" in Odin?
Thanks for any help
you dont need the pit file, you just need the tar file or the files containe within the tar file
Richy99 said:
you dont need the pit file, you just need the tar file or the files containe within the tar file
Click to expand...
Click to collapse
Thanks for your reply. Do I need to select re-partition?
Gaugerer said:
I would like to upgrade my stock firmware to KL4 using Odin and am unsure if I need a Pit file or will the tar file be all that I need. Also, do I need to select "Re-Partition" in Odin?
Thanks for any help
Click to expand...
Click to collapse
If you have 3 files after extracting (CODE,MODEM,CSC) then attach these three files as PDA=CODE , PHONE=MODEM, CSC=CSC, if you have one file the attach it in PDA,
Then UnCheck Re-partition,
no need to select Pit file,
Put your phone in download mode,
Attach phone to PC
Once your PC detects your Phone Click Start
After Flashing Device restarts twice. Done..
ranjan.alva said:
If you have 3 files after extracting (CODE,MODEM,CSC) then attach these three files as PDA=CODE , PHONE=MODEM, CSC=CSC, if you have one file the attach it in PDA,
Then UnCheck Re-partition,
no need to select Pit file,
Put your phone in download mode,
Attach phone to PC
Once your PC detects your Phone Click Start
After Flashing Device restarts twice. Done..
Click to expand...
Click to collapse
Thanks very much for your very helpful reply.
Remember using PC Odin to update, you are closing way to Root your device, If you want to Root it, just Root before it. See installation guide on my signature for further detail
dr.ketan said:
Remember using PC Odin to update, you are closing way to Root your device, If you want to Root it, just Root before it. See installation guide on my signature for further detail
Click to expand...
Click to collapse
Thanks for your advice and the guides which are very helpful. I've downloaded the German stock ROM (LA4) from your list but I've been unable to extract the tar file using Winzip, so I'm stuck at the moment. Any further help from anyone how to extract the files would be appreciated.
Gaugerer said:
Thanks for your advice and the guides which are very helpful. I've downloaded the German stock ROM (LA4) from your list but I've been unable to extract the tar file using Winzip, so I'm stuck at the moment. Any further help from anyone how to extract the files would be appreciated.
Click to expand...
Click to collapse
Dont use winzip to extract . Use 7z Extractor. its free.
Link to 7z
http://www.7-zip.org/download.html
ranjan.alva said:
Dont use winzip to extract . Use 7z Extractor. its free.
Link to 7z
http://www.7-zip.org/download.html
Click to expand...
Click to collapse
Thanks once again for your help. I didn't know that Winzip did not work and that I needed 7z which I have downloaded and extracted the tar file.
I had a problem with Odin. Could not get it to flash la4 no matter what I tried.
So I bought mobile odin , put the relevant file on my phone and I was upgraded in under ten min Awesome app, sometimes its worth payin some money to get the job done
Sent from my GT-N7000 using XDA App

Ace firmware: .Md5 file

Hi
I downloaded the latest firmware for India from samfirmware and found a .md5 file and a dll file. Not sure how to use that with Odin!! :-(
Anyone has ne ideas on this? Thanks in advance.
Sent from my GT-I9000 using XDA
thats a onepackage file. tick onepackage in option and add the md5 file in onepackage tab and just flash like normal.
Thanks for the quick reply. Forgot to mention that I got a dll file also along with the md5 inside the zip file. Whts that supposed to be used for?
Sent from my GT-I9000 using XDA
nothing. ignore it

[Q] unpack repack stock rom, without boot loader

hi, please i need help about unpack and repack galaxy mini stock roms (.tar.md5) cause i wanna remove bootloader (arm11boot) to avoid physical domage to my mini;
i didn't find the rom what im searching for in this thread: http://forum.xda-developers.com/showthread.php?t=1551586
i need this middle east rom: http://www.hotfile.com/dl/155191960/b13d98c/S5570JPKT2_S5570OJPKT2_EGY.zip.html but without bootloader;
thankx
Send a pm to annson08.. Include the link and he may do it for you..
kitrax59 said:
Send a pm to annson08.. Include the link and he may do it for you..
Click to expand...
Click to collapse
Don’t give me a fish, teach me how to fish.
I would like to help you fishing but I'M NOT RESPOSIBLE IF YOU ENDED BY CACHING A SHARK
I had downloaded a rom with removed bootloader from annson08 thread, by opening the .tar archive i noticed that he did just removed the arm11boot file from the package nothing else.
so maybe removing this file from your ROM and flashing it like usual will do the trick
Do It At Your Own Risk
Unpack rom..search bootanimation.zip.....replace with any other of ur choice
....repack
Sent from my GT-S5570 using xda premium
bilel2301 said:
hi, please i need help about unpack and repack galaxy mini stock roms (.tar.md5) cause i wanna remove bootloader (arm11boot) to avoid physical domage to my mini;
i didn't find the rom what im searching for in this thread: http://forum.xda-developers.com/showthre...?t=1551586
i need this middle east rom: http://www.hotfile.com/dl/155191960/b13d...Y.zip.html but without bootloader;
thankx
Click to expand...
Click to collapse
unpack rom and its contents
open boot.image
in that remove arm11 boot
pack your rom !
flash it via odin
abdovar said:
I would like to help you fishing but I'M NOT RESPOSIBLE IF YOU ENDED BY CACHING A SHARK
I had downloaded a rom with removed bootloader from annson08 thread, by opening the .tar archive i noticed that he did just removed the arm11boot file from the package nothing else.
so maybe removing this file from your ROM and flashing it like usual will do the trick
Do It At Your Own Risk
Click to expand...
Click to collapse
i know that he just removed arm11boot but when i did that with many method i didn't succed to add it to "odin multi downloader" it crashs every time when i add the new file without bootloader i think that is not just unpack,remove and repack there is something special to make odin fish a fish not a shark
bilel2301 said:
i know that he just removed arm11boot but when i did that with many method i didn't succed to add it to "odin multi downloader" it crashs every time when i add the new file without bootloader i think that is not just unpack,remove and repack there is something special to make odin fish a fish not a shark
Click to expand...
Click to collapse
He wrote it in his thread...
I believe the method requires linux (/cygwin)...
Edit: no, I couldn't find it... :sad:
Typed on a small touchscreen
a.cid said:
He wrote it in his thread...
I believe the method requires linux (/cygwin)...
Edit: no, I couldn't find it... :sad:
Typed on a small touchscreen
Click to expand...
Click to collapse
yeah i used cygwin too but i failed to make the output file work on odin!!!
i used this method from yagya:
Code:
cd firmware_directory
// Goes inside firmware directory
tar -cf firmware_name.tar amss mibib oemsbl qcsbl boot.img recovery.img system.rfs csc.rfs
// This will create a tar_file named firmware_name.tar containing all the files mentioned afterwards. You'll need to check if all files except arm11boot are included or not and add (or remove) to or from above list.
md5sum firmware_name.tar >> firmware_name.tar
// Checks md5sum of the tar file.
mv firmware_name.tar >> firmware_name.tar.md5
// Renames the firmware file. The outcome of this is your flashable zip file.
[optional] gzip firmware_name.tar.md5
//zips the firmware_name.tar.md5 file as gz format. It is easier while sharing the file since it reduces the file size by almost 50 %.
you did everything correct but the problem of Odin crashing is its a md5 file then you remove the arm11boot md5 of file changes which makes the Odin crash
steps to correct it:-
1. extract everything from package
2. delete arm11boot
3. then download a software which can create a tar package
4. with that software create an empty tar package
5. put all the files in that tar package
then then you are ready to flash
dhlalit11 said:
you did everything correct but the problem of Odin crashing is its a md5 file then you remove the arm11boot md5 of file changes which makes the Odin crash
steps to correct it:-
1. extract everything from package
2. delete arm11boot
3. then download a software which can create a tar package
4. with that software create an empty tar package
5. put all the files in that tar package
then then you are ready to flash
Click to expand...
Click to collapse
it doesn't work also!!!! i flash it with (.tar) odin freeze in "download amss" and with (.tar.md5) odin crash also like using cygwin!!! i think that i really need help from annson08, i pm him but he didn't answer :/ :/
bilel2301 said:
it doesn't work also!!!! i flash it with (.tar) odin freeze in "download amss" and with (.tar.md5) odin crash also like using cygwin!!! i think that i really need help from annson08, i pm him but he didn't answer :/ :/
Click to expand...
Click to collapse
hey sorry for the late reply, really busy at the moment. I believe yagya made a tutorial about this...wait....hmmmm....ahh here it is,
http://handyinformation.freevar.com/showthread.php?tid=8&pid=12#pid12
that's not how I do things but that link also works.
annson08 said:
hey sorry for the late reply, really busy at the moment. I believe yagya made a tutorial about this...wait....hmmmm....ahh here it is,
http://handyinformation.freevar.com/showthread.php?tid=8&pid=12#pid12
that's not how I do things but that link also works.
Click to expand...
Click to collapse
the link that you send to me is the link of my thread in yagya's forum
i try yagya's method but it doesn't work for me :/ :/
please when you have time pm how to do it thankx

How to update firmware on Galaxy mini 2 GT-S6500?

I have just two files:
6500....._HOME.tar.MD5 and SS_DL.dll
and odin with ops file from samfirmware
?
does someone knows how to flash this?. in case i softbricked my phone.
grigoreee said:
I have just two files:
6500....._HOME.tar.MD5 and SS_DL.dll
and odin with ops file from samfirmware
?
Click to expand...
Click to collapse
Put your phone in download mode (power button+volume down button+home button while its switched off) then connect via usb.
First select the .ops file in the ops column
Then in odin tick the "one package" option and select the MD5 file. Then just flash it. Done.
Yup its one package file just tick one package.. And select the md5 file.
U find some 4 file format firmware? If u find iy use it.
BOOT
PHONE
PDA
CSC
Its 4 file format some firmware it is.
I got exp get brick my phone by one package so. ..Do ur own risk
Sent from my GT-S5570 using XDA
can you point the link to download it?
search for sam... .com http://forum.xda-developers.com/showthread.php?t=1261710

Categories

Resources