Isn't the Note 2 equipped with wireless charging functions? Anyone seen the accessories for wireless charging yet? Like a replacement back cover (if needed) or the cradle for the wireless charging?
It supossed to be a galaxy s3 accesorie but its time that note2 ships and the charger not hahaha i think samsung will never launch the item maybe next year
Sent from my GT-N7100 using xda app-developers app
Lol @ the topic :silly:
Jamal Ahmed said:
Lol @ the topic :silly:
Click to expand...
Click to collapse
I am going to attempt to mod my Note 2 tomorrow after I receive it cause I assume that the two pins by the battery are the wireless charging pins as seen on an S3... The other two upper pins are for the NFC chip on the back plate (of course) This will be challenging as the palm charger mod for the S3 was with a smaller phone so I will have to modify my setup a lil... I have no doubt that those are for wireless charging.... They are in the same position as the S3 charging pins even with the screw next to the pins... Hmmm? Multimeter time...:good:
Even if you mod the phone to charge wirelessly I have never seen a wireless charging mat that has more than 1amp current and note II requires 2amp
Sent from my GT-N7100 using xda app-developers app
alsolh said:
Even if you mod the phone to charge wirelessly I have never seen a wireless charging mat that has more than 1amp current and note II requires 2amp
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
It doesn't require 2 amps, it just charges faster with 2amps
My old SGS2 chargers work fine, albeit slowly, with my note 2
This seller on ebay has gotten the OEM Note 2 back covers, and added the wireless charging from the Palm Pre to work with the Palm Touchstone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EBAY LINK
It looks like it works and I'm thinking about getting this. A bit expensive though but is sick!
Interesting, although those are not the charging antennas from the Palm Pre. I assume it is the same technology, though.
Interesting concept. Does the Palm Touchstone have the output capability of 2A that the Note requires? I have a bunch of Touchstone docks lying around (from the $5 fire sale) and am interested, but I doubt the current is high enough to charge properly.
Nevermind, read above. Guess it will work, but will be real slow. Not worth the price, IMO. Also, shipping by Nov 28! By the time it reaches us, Samsung will probably have it's genuine solution for sale lol!
ericshmerick said:
Interesting concept. Does the Palm Touchstone have the output capability of 2A that the Note requires? I have a bunch of Touchstone docks lying around (from the $5 fire sale) and am interested, but I doubt the current is high enough to charge properly.
Nevermind, read above. Guess it will work, but will be real slow. Not worth the price, IMO. Also, shipping by Nov 28! By the time it reaches us, Samsung will probably have it's genuine solution for sale lol!
Click to expand...
Click to collapse
I don't think it matters if it's 1A. You can just use the 2A wall plug from your Note 2 right?
Sent from my shooter using xda premium
KB112 said:
I don't think it matters if it's 1A. You can just use the 2A wall plug from your Note 2 right?
Sent from my shooter using xda premium
Click to expand...
Click to collapse
Guess it depends if the full 2A current will continuously pass through via conductive charging.
Sent from my Galaxy Nexus using Tapatalk 2
This wireless charging dock should be working at 2amps because it is for the hp touchpad tablet which requires 2amps.
http://www.amazon.com/gp/product/B0...pf_rd_t=101&pf_rd_p=1389517282&pf_rd_i=507846
If I apply the palm coil to the note 2 and put my note 2 on this dock will it charge at 2amps? Can anyone try with his 25 bucks?
Sent from my GT-N7100 using xda app-developers app
alsolh said:
This wireless charging dock should be working at 2amps because it is for the hp touchpad tablet which requires 2amps.
http://www.amazon.com/gp/product/B0...pf_rd_t=101&pf_rd_p=1389517282&pf_rd_i=507846
If I apply the palm coil to the note 2 and put my note 2 on this dock will it charge at 2amps? Can anyone try with his 25 bucks?
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
I tried an HP Touchstone with palm/pixi coil, couldn't get it to work. Anyways, the palm touchstone gave me about 460mA as I remember, on my S3 btw. A larger supply didn't effect that, something either the coil or the phone limited the throughput.
Bleah, it looks like the Chinese already built one of those inductive chargers for the Note II. Just some stickers and careful placement, and you will get your wireless charging. Seriously wtf is Samsung doing?
Fornowagain said:
I tried an HP Touchstone with palm/pixi coil, couldn't get it to work. Anyways, the palm touchstone gave me about 460mA as I remember, on my S3 btw. A larger supply didn't effect that, something either the coil or the phone limited the throughput.
Click to expand...
Click to collapse
i am planning of doing my own mod.
which coil is better to use with the touchstone dock? the pixie or the pre coil? the pre coil is 2x the price of a pixie coil. also can u recommend me a good&cheap conductive adhesive from amazon?
pre: http://www.amazon.com/gp/product/B002UNKGMC/ref=ox_sc_act_title_1?ie=UTF8&smid=A1TB4CRIUIFO5O
pixie: http://www.amazon.com/gp/product/B002UHKPGU/ref=ox_sc_act_title_4?ie=UTF8&smid=AC2MYOW3JMFEH
Be very careful with wireless charging solutions. So far I've heard they charge rather slowly, approx 6-8hrs for s3. I cnt even imagine how long note 2 would take to charge.
The magnetic induction thingy may be limiting the max current that goes into the phone
Sent from my GT-N7105 using Tapatalk 2
alsolh said:
i am planning of doing my own mod.
which coil is better to use with the touchstone dock? the pixie or the pre coil? the pre coil is 2x the price of a pixie coil. also can u recommend me a good&cheap conductive adhesive from amazon?
pre: http://www.amazon.com/gp/product/B002UNKGMC/ref=ox_sc_act_title_1?ie=UTF8&smid=A1TB4CRIUIFO5O
pixie: http://www.amazon.com/gp/product/B002UHKPGU/ref=ox_sc_act_title_4?ie=UTF8&smid=AC2MYOW3JMFEH
Click to expand...
Click to collapse
The pixi has a slightly smaller IC package and a small flexible contact arm that can be easily modified. Current wise, no difference.
touchstone for touchpad
ericshmerick said:
Interesting concept. Does the Palm Touchstone have the output capability of 2A that the Note requires? I have a bunch of Touchstone docks lying around (from the $5 fire sale) and am interested, but I doubt the current is high enough to charge properly.
Nevermind, read above. Guess it will work, but will be real slow. Not worth the price, IMO. Also, shipping by Nov 28! By the time it reaches us, Samsung will probably have it's genuine solution for sale lol!
Click to expand...
Click to collapse
I am about to do the mod though using my touchstone for hp touchpad with a 2amp charger. I actually use the 2 amp charger now on my note 1 and charges great and fast
http://www.ebay.com/itm/Wireless-Ch...549896?pt=PDA_Accessories&hash=item2323725188
Found this on eBay, the charging module is $25 (£15.60) the touchstone charger I've seen on amazon for £5.30, for over 20 quid you've got a cheap alternative for wireless charging the only thing is you have to stick it on the case yourself and line up the pins.
I'm planning on doing the mod myself by tearing the module out of the Palm Pre casing and placing it in my case.
On the Note the charging pins are top pin positive & bottom pin negative. Hopefully the Palm Pre case will come tomorrow and i will upload some pictures of doing the mod.
Just done the Wireless Mod now, working good.
http://forum.xda-developers.com/showthread.php?p=33165244#post33165244
Related
i picked up the induction charger and back today for my Droid 3.
The new back cover adds weight and thickness. BUT - the rounded edges feel alot better than the stock back
I had to use doubleback tape to get the induction charger to stay on my desk since it is so light. too light to just pick the phone straight up. there are magnets that put the phone in the right position over the pad.
when the phone is in the right position on the pad, it is not in the middle.... i find that sort of weird. it's either high on the pad or low on the pad (depending on the direction)
it charges with decent speed if you have the display off while charging. I will have to use it more tomorrow, but it seemed to only charge me up to 90% and then quit. at least it reset the time since charge meter. The phone warms up slightly while charging, but not uncomfortably.
I am curious about trying the extended battery with this....
verdict - nice.
couple questions if you don't mind:
1 - how much thickness is added with the inductive back cover? Could you maybe take a side by side picture as a reference?
2 - does the charger use the Qi standard for inductive charging? Maybe listed somewhere on the package...
I got too busy to take a shot today....
Sent from my DROID3 using XDA App
can anyone confirm that the induction charger is compatible with the extended battery?
Sent from my DROID3 using Tapatalk
Confirmed!
I am using the D3 with extended battery and Inductive charger.
fallst said:
I am using the D3 with extended battery and Inductive charger.
Click to expand...
Click to collapse
Does it work well?
Sent from my DROID3 using Tapatalk
Pictures would be good. Will the inductive charger still be to use all the other docks?
My guess is yes
Sent from my DROID3 using Tapatalk
kshen1 said:
Does it work well?
Click to expand...
Click to collapse
Yep! Just drop it on the charger at night, pick it up in the morning, no muss no fuss.
Cheeze[iT] said:
Pictures would be good. Will the inductive charger still be to use all the other docks?
Click to expand...
Click to collapse
Sorry, I don't have pics, I don't have docks. Maybe someone else can jump in here...
I second for pics.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here are 3 photos.
Sent from my DROID3 using XDA App
i was wondering were did you purchase the induction charger and the d3 back at? i tried looking online and cant find it
I was wondering about a charging pad too are there any others out there that work w/ the droid 3?
Sent from my DROID3 using XDA App
not sure this is worth the cost when for free i can plug it in to charge
littleneutrino said:
not sure this is worth the cost when for free i can plug it in to charge
Click to expand...
Click to collapse
Its worth it to me cuz I don't want to end up forgetting my charger at home and having to move it back n forth from my work bag going to work and getting home. It'd be easier for me just to leave it in my bag and use a pad or just another charger. *shrug*
Sent from my DROID3 using XDA App
Has anyone found a case/holster that fits with the inductive cover?
Does the inductive charging back work on anything besides the verizon wireless charging pad? I already have a powermat, and was wondering if it was using the same induction technology.
The verizon charging pad is actually from LG, and they say they use the new Qi standard, which Powermat also says they use. Powermat doesnt say how long theyve been using the Qi standard though, so you'll want to check the device before buying. There is also the Energizer inductive pad, which also uses the Qi standard, but those are nigh impossible to find. I ordered a single slot charger off Amazon yesterday, and it is out of stock, so I will see it when I see it.
All in all, I absolutely LOVE my inductive charging. I bought three pads, one for home, one for truck, and one for work. I even fabricated a mount for my truck, so the phone doesnt slide all over the place when I drive fast.
Only problem is that damn loud as hell beep you get when you place the phone down. I took it apart, and tried to remove the speaker, but it trashed the unit. $45 down the drain in the name of modding!
So I got the energizer Qi charging pad, it does work, and does not have a beep. It is larger, less refined than the LG pad, and is a little harder to position correctly.
All in all, I definitely prefer the Verizon / LG inductive charging pad, but that damn beep ruins it for office/bedside use.
Sent from my DROID3 using XDA App
Has anyone tried one of these?
http://www.amazon.com/Aftermarket-P...=UTF8&qid=1385474373&sr=8-5&keywords=lg+g2+qi
I'd be curious to hear your experience, I wonder how thick or fragile it is. I'd buy one to test but I am not in the US and would have to import it.
I ordered one a week or two ago. One of my wireless charging pads (which I didn't have any of, so I had to order a couple) arrived yesterday, but still waiting for the receiver coil. Hopefully any day now.
Edit: bah, I forgot, it's being shipped from HK; it'll be a while yet (the pads came from the US).
Klotar said:
I ordered one a week or two ago. One of my wireless charging pads (which I didn't have any of, so I had to order a couple) arrived yesterday, but still waiting for the receiver coil. Hopefully any day now.
Edit: bah, I forgot, it's being shipped from HK; it'll be a while yet (the pads came from the US).
Click to expand...
Click to collapse
Awesome, I look foward to hearing your thoughts on it when you get it
They are pretty thin. I've never use one quite like that, but I used the external pads for the Note 2 that I retro fitted into my old Verizon Galaxy Nexus... and it worked extremely well.
I ended up hooking it up to the POGO pins and taping it onto the battery I had to do a little case modding to make it all fit in a normal Incipio Feather case (basically cut a back plate in half, but I had like 5 of them).
So it works really well. The problem I see here though is you are eating up the USB port all the time. With the thin profile cable, I wouldn't attempt to unplug it many times. Just leave it and forget it. Fortunately the G2 has a great battery. My Verizon G2 has this built in, and I Qi Wireless Charge every night.
The Coils are thin, but thick enough to forbid the use of a thin case like a Incipio Feather. If you use this, you are best off using a TPU case that is flexible.
player911 has nailed the situation. My plan is to 'switch over' entirely to wireless charging for the most part, and wifi file transfers -- I don't want to be unplugging/plugging the usb connector in at all. I figure one more charging pad (total 3) should do it... 1 at work, 2 at home kinda thing.
The eBay version of the amazon listing linked seems to suggest it will come with a case (the one pictured). I can't imagine why I would be asked to pick a colour otherwise black or white, when ordering. Yet both listings state "1 piece", so who knows. Will report what I end up with when it arrives. My S3 had the pogo pins so that you could use wireless or usb for charging but I never went that route at the time. The use of the usb port on the G2 did give me pause but I'm going to give it a go.
I would give it a go too. Perhaps temporarily until a internal solution pops up (bound to happen). Even if it doesn't come with a case, TPU cases are a dime a dozen.
-sent from my LG G2 using XDA Premium 4
I just bought one of these, when I get it in over 2 weeks I'll make a review of it since no one else buying these has still.
http://www.ebay.com/itm/261329370615
Interesting. I look forward to hearing how these work.
I've received my coil from ebay, and "installed" it.
It is working fine, however my battery is almost full, so I can't test now the current. I'll do it later.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Awesome, thanks for the pics! BTW, what charging pad is it that you have there, with the green and red lights?
How thick is the coil? Do you think it is possible to fit it under the back cover? Because I'm planning to do that and run the cable through a hole I want to cut in the back cover so that I can plug it in the usb connector.
Eh that isn't too bad. Looks fine IMO. Besides you don't really need to use the USB port with the Wireless Storage option (awesome feature) and Qi Charging.
So if the port is unused, the also acts like a port saver to keep dirt and lent out.
If you feel lucky and want to further reduce thickness, you can open that package up and remove just the coil. The packaging is basically a thick plastic sticky back that is folded over. Removing the outer plastic housing will cut down 1-2mm. Inside the hard plastic cover, there is the actual coil that is in a black square sticker. The Coil itself is round. On mine, I removed the outer shell and trimmed the unused outside area around the coil. Creates a smaller footprint and gets even thinner.
My goal with my Galaxy Nexus was to fit it in a hard Incipio Feather Slim Case. As it is, any TPU case should work though.
Klotar said:
Awesome, thanks for the pics! BTW, what charging pad is it that you have there, with the green and red lights?
Click to expand...
Click to collapse
yes, the cheap one from ebay.
stronkk said:
How thick is the coil? Do you think it is possible to fit it under the back cover? Because I'm planning to do that and run the cable through a hole I want to cut in the back cover so that I can plug it in the usb connector.
Click to expand...
Click to collapse
it is thin, but I don't if there is enough space under the backcover, I've never removed it.
I'm still testing it, if my readings are correct it is charging the G2 with at least 400 mA.
Now I've moved it to check how much does the positioning matter.
I've charged it from 50% to 100% using this stuff, it was charging with ~450 mA
Qi is a slow charge. I use mine for my desk and nighttime charging.
Sent from my Nexus 7 using XDA Premium 4 mobile app
WiZARD7 said:
I've received my coil from ebay, and "installed" it.
It is working fine, however my battery is almost full, so I can't test now the current. I'll do it later.
Click to expand...
Click to collapse
Soooooo, how it's working?
Bought one from an Ebay U.S. seller, hope it works.
Sent from my Nexus 7 using xda app-developers seapp
tupacpsp said:
Soooooo, how it's working?
Click to expand...
Click to collapse
fine
400-450 mA charging current.
I've ordered two different kinds, one is the same as Wizard7 that purports 500 mA output and the other purports 750 mA output. I've received neither one yet although according to tracking, the 750 mA one is finally slated for delivery today. But it has a longer cable that I'll figure out how to fold or contend with.
While I fully expected qi charging to be slower, I have to admit I hoped it would be faster than PC USB at least. It would have been a decent solution if I didn't "lose" use of the usb ports but I guess as long as it charges overnight, I can't complain.
Sooo which qi chargers do you guys recommend?
I also bought the charging coil ;D
Sent from my LG-D802 using XDA Premium 4 mobile app
After installing one of these:
http://www.aliexpress.com/item/Wire...-Housing-Back-Cover-Case-T01/32357030303.html
into the back of a black leather case, I've noticed that this phone/antenna is very sensitive about where you place it on the wireless charging pad. I previously had a Galaxy S4 that I stuck a wireless charging sticker into, but that was much more forgiving about where it is placed on the charging pad.
Both pads I have are single coil. Lots of people speak highly of the Tylt Vue, probably because it has 3 coils. There are other much cheaper 3 coil versions available, and even versions with moving coils that supposedly find the sweet spot automatically.
What is the best wireless charging pad to use with this sticker?
With Tylt Vu do you have to place phone in landscape/horizontal to get it to charge?
Doesn't seem to be a lot of talk on QI Wireless Charging Pads.. What you guys using, with success?
LG has come out with a charger specifically for the G4:
http://www.amazon.com/Genuine-LG-Wireless-Charger-WCD-110/dp/B00XPTN0I2/
Looks identical to the one they had for the G3. Does anyone know if this charger (or any other charger) will allow the G4 with the Qi sticker to be easily and reliably placed vertically on the charger, so that there is no other fiddling around that is needed to find the "sweet spot" that is needed for wireless charging to connect and charge?
I grabbed 2 of these http://www.amazon.com/Itian-Wireles...437331299&sr=1-6&keywords=Qi+Wireless+Charger been great going to grab a 3rd for the living room. Phone is always charged up when I leave the house.
I just toss it on it and I have no issues
BDestroyer8418 said:
I just toss it on it and I have no issues
Click to expand...
Click to collapse
Was going to ask if vertical, but your review on the Amazon page pretty much says it all:
http://www.amazon.com/gp/customer-r.../ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B00S7IBDGW
Thanks.
wified said:
Was going to ask if vertical, but your review on the Amazon page pretty much says it all:
http://www.amazon.com/gp/customer-r.../ref=cm_cr_pr_rvw_ttl?ie=UTF8&ASIN=B00S7IBDGW
Thanks.
Click to expand...
Click to collapse
Yea I did write a review since I was happy with it for the price it is great. I grabbed it since some other reviewer said it worked with the Otterbox G3 so I figured ok this should work then with the Otterbox G4 and it did.
Lots of people are having problems with their Qi Charging of their G4s. It happens to me too, where the device will just start freaking out midway through the night. SystemUI crashes and I the desktop keeps crashing to a black screen. After a few minutes off the charger, it will recover. I am not sure why it does this though. Charging is a hardware mod. So there has to be some charging software that is freaking out. I've had my Nokia Charger for years. It charges my Nexus 7 2013 and other devices I have. The only problems I have are with the G4... and it isn't consistent. Some days are fine, others are not.
Some have said different chargers work with better results.
I am really disappointed that LG doesn't have official wireless charging backs available (and not the stupid flip case). If you sell a phone with Qi able... sell the damn Qi enabled backplates. I am unsure if maybe I have a bum Qi Sticker, if it isn't aligned 100%, or if it is just the phone itself.
It seems to get stupid when I take it off and on a few times before I go to bed. If I just plop it down and leave it alone, it seems to do better. But if I check my emails in the middle of the night a few times, it seems to be locked up in the AM.
Do people with the official LG flip case have issues with wireless charging I wonder?
What are most of using? Woild you buy it again? If not why? What other if any would you buy? If considering any one brand but price is an issue, at what price would it be reasonable?
I like the TYLT Vu because its a dock and its colors. But its pricey imo, but at $30 would you buy it? The LG dock has gone down to $30 as well.
I also found the LG pad for $20 right now. Any good, worth buying or spending a bit more on another plate or dock?
Let me know your opinions, Im looking to order one really soon. My sticker should arrive this weekend.
These are some I am considering and comparing official LG Qi
LG Electronics WCP-300 Wireless Charging Pad - Retail Packaging - Black
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LG WCD-100 Official Wireless Desktop Charger Dock for LG G3 (White)
I am looking for one but not find official wireless charging backs for G4
jack-five said:
I am looking for one but not find official wireless charging backs for G4
Click to expand...
Click to collapse
Only official charging back is circle case.
Otherwise you would need to do as others have done and buy/ install nfc/qi chip sticker.
clockcycle said:
Do people with the official LG flip case have issues with wireless charging I wonder?
Click to expand...
Click to collapse
No. I tore off the flip cover just like on my G3. QI works perfectly on my G4. I only use the Tylt Vu at home & work, & I have a QI car mount (Choe) for my car. I've never had issues with either. The car charging is slow sometimes b/c I'm always on bluetooth streaming & have my Google navigation going.
Sent from my LG-H815 using Tapatalk
EC Technology 50W 10A 5-Port Smart USB Charger with Qi-Enabled Wireless Charger $21
Missed this one last month for $10.
Slickdeals link EC Technology 50W 10A 5-Port Smart USB Charger with Qi-Enabled Wireless Charger for $20.99 AC + FSSS @ Amazon.com
http://www.amazon.com/dp/B00U27VZC8/
Code: CAZDEFC6
- This 50W/10A smart charger is the perfect combination of USB Charger & QI Wireless charger. Charges up to 6 devices at once: 5 USB Port and 1 Wireless Charging Pad(Confirm that your device is Qi-compliant).
- 5 x Smart Charging Port - Detects your device to deliver its fastest possible charge speed up to 2.4 amps per port or 10 amps overall (charge 4 iPad Airs at full speed simultaneously).
- 1 x Wireless Charging Pad: Starts the moment you place down any Qi-enabled device or device equipped with a Qi-compatible cover. No cables or USB interface required.
- Extreme compact size - Easily fits in pocket. AC 100-240V input voltage for any international or European travel, and a detachable 1.5M power cord(UK Plug) is included for easy transport.
- Certified by CE, FCC & RoHS, with protections against over-charged, over-discharged, over-voltage, over-current and short-circuit. The high quality fire-proof material ensure reliability and durability.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I got this amazing cable from Amazon and its working great with Quick Charge 2.0 Chargers. The micro USB connector can also act as Dust plug. So its prevent wear and tear on the Micro USB port.
New arrival metal magnetic cable for Micro USB,First Detachable Magnetic Micro USB 2.0 port Cable for the Android phones. Easily to snap on, reducing abrasion during inserting or pluging out the cable.Connect within 1 second, both sides can be charging. 1m of durable, flexible cord to suit a variety of everyday connection needs.Unique combination of both METAL and MAGNETIC. Improved Magnetic Power and Charging Speed . Charging Status LED light included. / Surge protection chip inside to protector your device.Lightning white reminding on charging:LED indicator for showing the working status of the cable, white light for charging. And Detachable Micro USB Connector Perfect as Dust Plug.Charging and data transmission: Both front and back side are capable for charging.Keep light of connector and front side of metal plug the same side when you want to data transmission.
http://www.amazon.com/gp/product/B01009NQGK?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00
Sent from my LG G4 H815 USA 4G LTE TMO
Interesting - thanks for sharing. Do you have a link from Amazon?
Not sure how I feel about having a piece there that's constantly sticking out, however.
Sfkn2 said:
Interesting - thanks for sharing. Do you have a link from Amazon?
Not sure how I feel about having a piece there that's constantly sticking out, however.
Click to expand...
Click to collapse
http://www.amazon.com/gp/product/B01009NQGK?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00
I like that tiny bit of piece...its act as dust plug.
Look up Znapz... it's a kickstarter that seems more elegant than this one. Hope it works out for you though.
that is awesome. Although I am curious about how well the plug will stay in compared to the pull of the magnets.
player911 said:
that is awesome. Although I am curious about how well the plug will stay in compared to the pull of the magnets.
Click to expand...
Click to collapse
Surprisingly it hold pretty well. Seem secure enough.
我從使用Tapatalk的LG G4 H815 US 4G LTE TMO發送
why dont we back this project up ?
https://www.kickstarter.com/projects/1041610927/znaps-the-9-magnetic-adapter-for-your-mobile-devic?flyingspaghettimonster=nav_search
INGfusion said:
why dont we back this project up ?
https://www.kickstarter.com/project...obile-devic?flyingspaghettimonster=nav_search
Click to expand...
Click to collapse
I backed it. Gonna be well worth it. Like it better than one in op. If you read there whole kickstarter they are well above and beyond and still going. I see this going huge.
mrcrusha829 said:
Look up Znapz... it's a kickstarter that seems more elegant than this one. Hope it works out for you though.
Click to expand...
Click to collapse
I purchased 2 similar magnetic cables by WSKEN on Amazon...$14.99 each. Looks like they are made from the same manufactures but under different names.
The micro attachment is very tight and keeps flush with the bottom of the LG G4...the magnet cable is similar to Apples magnetic charging cables. If you didn't know, you would think it was made by Apple.
I haven't got the chance to test them out since I just received them today, but so far so good.
They need to design different types of attachments, so a single magnetic cable can be utilized with several different charger types.
Overall, I think this was a good idea and should be better than a plain USB to micro cable.
dragion said:
I purchased 2 similar magnetic cables by WSKEN on Amazon...$14.99 each. Looks like they are made from the same manufactures but under different names.
The micro attachment is very tight and keeps flush with the bottom of the LG G4...the magnet cable is similar to Apples magnetic charging cables. If you didn't know, you would think it was made by Apple.
I haven't got the chance to test them out since I just received them today, but so far so good.
They need to design different types of attachments, so a single magnetic cable can be utilized with several different charger types.
Overall, I think this was a good idea and should be better than a plain USB to micro cable.
Click to expand...
Click to collapse
Kickstarter Znapz have that type you mentioned. But I can't wait for them to materialize. Never trust these kickstarters bull.
I get use to these cables and i got 2 of it with 4 Micro USB connectors. I don't really uses Qi Charging that much anymore and besides it support Quick Charge 2.0.
我從使用Tapatalk的LG G4 H815 US 4G LTE TMO發送
rogconnect said:
Kickstarter Znapz have that type you mentioned. But I can't wait for them to materialize. Never trust these kickstarters bull.
I get use to these cables and i got 2 of it with 4 Micro USB connectors. I don't really uses Qi Charging that much anymore and besides it support Quick Charge 2.0.
我從使用Tapatalk的LG G4 H815 US 4G LTE TMO發送
Click to expand...
Click to collapse
I wasn't referring to the "kickstarter" version, but the same ones you bought.
Same exact packaging , just under a different name.
I'm using both of mine...one for the car and the other for my workplace.
I prefer this over Qi charging...I was thinking of ordering the Qi chip sticker and a Qi charger to test out, but so much unreliability regarding this method.
How was your experience with Qi charging?
dragion said:
I wasn't referring to the "kickstarter" version, but the same ones you bought.
Same exact packaging , just under a different name.
I'm using both of mine...one for the car and the other for my workplace.
I prefer this over Qi charging...I was thinking of ordering the Qi chip sticker and a Qi charger to test out, but so much unreliability regarding this method.
How was your experience with Qi charging?
Click to expand...
Click to collapse
You can forget about Qi Charging honestly. Its created so much heat these day with this hot summer. And once its run hot the G4 couldn't charge efficiently. And now I suspected even if my Qi stickers are defected.
我從使用Tapatalk的LG G4 H815 US 4G LTE TMO發送
rogconnect said:
You can forget about Qi Charging honestly. Its created so much heat these day with this hot summer. And once its run hot the G4 couldn't charge efficiently. And now I suspected even if my Qi stickers are defected.
我從使用Tapatalk的LG G4 H815 US 4G LTE TMO發送
Click to expand...
Click to collapse
Thanks! :good:
Great information to know.
I'll stick with the traditional method and with these magnetic USB charging cables, it will make it a bit easier.
I am using this on a Dock and its wireless charging with QC 2.0.
rogconnect said:
You can forget about Qi Charging honestly. Its created so much heat these day with this hot summer. And once its run hot the G4 couldn't charge efficiently. And now I suspected even if my Qi stickers are defected.
Click to expand...
Click to collapse
This has the potential to replace wireless charging. Sony has been doing it for years.
Best is that it is so easy to retrofit any device
The problem with the stickers i've noticed when it came out for samsungs a year ago is that NFC does not work properly. So they make the sticker with thinner wires. Now NFC works but then the problem is it takes longer to wirelessly charge than with thicker wires. Next. you have to find a proper charger and depending on the device, if the vendor did not make it you will be lucky to get it working.
Too much hassle....
With the dual sim G4, there is no possiblity for wireless charging at all since the two pins are not even there, i don't think i will miss wireless charging.
One Twelve said:
This has the potential to replace wireless charging. Sony has been doing it for years.
Best is that it is so easy to retrofit any device
The problem with the stickers i've noticed when it came out for samsungs a year ago is that NFC does not work properly. So they make the sticker with thinner wires. Now NFC works but then the problem is it takes longer to wirelessly charge than with thicker wires. Next. you have to find a proper charger and depending on the device, if the vendor did not make it you will be lucky to get it working.
Too much hassle....
With the dual sim G4, there is no possiblity for wireless charging at all since the two pins are not even there, i don't think i will miss wireless charging.
Click to expand...
Click to collapse
I already give up Qi Charging. Now most of my devices are using this.
我從使用Tapatalk的LG G4 H815 US 4G LTE TMO發送
I'm not using wireless charging. I've got the suspicion that wireless charger (due to excessive heat) has spoilt the battery in my G3 and my S4
My question is:
Does this have any fitment issues with cases or will most cases with a large enough cutout work with these?
If anyone who has these could post the dimensions in LxWxH (in millimeters) I would greatly appreciate it.
johno86 said:
My question is:
Does this have any fitment issues with cases or will most cases with a large enough cutout work with these?
If anyone who has these could post the dimensions in LxWxH (in millimeters) I would greatly appreciate it.
Click to expand...
Click to collapse
Hope these pics help[emoji328]
Sent from my LG-H788 using Tapatalk
That looks really tight. I'm using Unicorn Beetle Supcase and it measure 1.4 cm exactly.
EDIT: Found that the cable part may require up to 16.6mm (1.66 cm)
*I was given a discount for my honest opinion and review*
First off I'm more of a wire guy. I like to know that my phone is plugged in and always charging.
I did receive the free promo wireless charger from Samsung for the Samsung pay promotion. And I have to say I barley used it. I placed it downstairs in my living room with the thought that when I'm watching TV I can place it on. Never happened lol
Now on to this fast wireless charger...
The packaging was actually very simple and very nice. Something I'm a fan of.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The charger itself was very compact, I got the black color. Comes with a rubber ring along the outside circle for grip.
Lights up green to indicate that it is charging. Here it is compared to the Samsung charger
Overall I love this charger. I actually use it everyday now. I have it set up next to my laptop, which might be the reason why the constant use. Charges the phone up really quick. As fast as the wire in my opinion.
Also for such a small surface, I always place it down and it begins charging.
I think the smaller surface leads you to place the phone down just right for a charge.
Would definitely buy from choetech again.
Sent from my SM-G935T using XDA-Developers mobile app
I purchased 2 Choetech fast wireless chargers and they both went bad after a few months. Got them when I got my Note 5. Decided to buy Samsung's OEM fast wireless charger and still works. Has a built-in fan to keep it from over heating. More expensive but better in my opinion.
Sent from my SM-G935V using Tapatalk
le0.br4zuc4 said:
I purchased 2 Choetech fast wireless chargers and they both went bad after a few months. Got them when I got my Note 5. Decided to buy Samsung's OEM fast wireless charger and still works. Has a built-in fan to keep it from over heating. More expensive but better in my opinion.
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
So far it hasn't over heated for me. I hope it stays that way
Sent from my SM-G935T using XDA-Developers mobile app
I purchased this charger and got it with the ChoeTech wall charger that's optimal for this wireless charging pad. So far, its been a horrible experience. I tried ti on my S7 Edge for a week and on 2 different S6 Edges. All with the same exact result, it charged approximately 25% an hour. I tried with and without a Spigen Neo Hybrid but I got the same results. I tried it directly plugged into the wall versus a powerbar and there was no difference. The phones and the charging pad would get extremely hot and charge very slowly. The connection was good though and I would get notification on the phone that it was "Fast Charging." Overall, very bad in my view. I got it directly from ChoeTech on Amazon.ca.
mobeast17 said:
*I was given a discount for my honest opinion and review*
First off I'm more of a wire guy. I like to know that my phone is plugged in and always charging.
I did receive the free promo wireless charger from Samsung for the Samsung pay promotion. And I have to say I barley used it. I placed it downstairs in my living room with the thought that when I'm watching TV I can place it on. Never happened lol
Now on to this fast wireless charger...
The packaging was actually very simple and very nice. Something I'm a fan of.
The charger itself was very compact, I got the black color. Comes with a rubber ring along the outside circle for grip.
Lights up green to indicate that it is charging. Here it is compared to the Samsung charger
Overall I love this charger. I actually use it everyday now. I have it set up next to my laptop, which might be the reason why the constant use. Charges the phone up really quick. As fast as the wire in my opinion.
Also for such a small surface, I always place it down and it begins charging.
I think the smaller surface leads you to place the phone down just right for a charge.
Would definitely buy from choetech again.
Sent from my SM-G935T using XDA-Developers mobile app
Click to expand...
Click to collapse
"Charges the phone up really quick. As fast as the wire in my opinion."
Thanks for the review.
One comment. When doing a review, other than obvious aesthetic judgements (e.g., does it look cool?), you should be fact based and not offer opinions on something that should be measured if you're going to report on it, like charging speed.
It's like Car and Driver saying it's their opinion that a Mustang can go 180 miles per hour. Their opinion on that isn't relevant, they need to measure the car's top speed to report on it.
Sent from my SM-G935V using Tapatalk
mobeast17 said:
*I was given a discount for my honest opinion and review*
First off I'm more of a wire guy. I like to know that my phone is plugged in and always charging.
I did receive the free promo wireless charger from Samsung for the Samsung pay promotion. And I have to say I barley used it. I placed it downstairs in my living room with the thought that when I'm watching TV I can place it on. Never happened lol
Now on to this fast wireless charger...
The packaging was actually very simple and very nice. Something I'm a fan of.
The charger itself was very compact, I got the black color. Comes with a rubber ring along the outside circle for grip.
Lights up green to indicate that it is charging. Here it is compared to the Samsung charger
Overall I love this charger. I actually use it everyday now. I have it set up next to my laptop, which might be the reason why the constant use. Charges the phone up really quick. As fast as the wire in my opinion.
Also for such a small surface, I always place it down and it begins charging.
I think the smaller surface leads you to place the phone down just right for a charge.
Would definitely buy from choetech again.
Click to expand...
Click to collapse
**This is my original review of this charger**
**This is from back when I had a Note 5 and a LG G4**
I received my charger from Choetech yesterday and tested it with my moto 360 as well as a few of my other devices.
I figured that I should post my review (from amazon) up here due to the testing on the moto 360. I have bolded that parts people here will be interested in.
http://www.amazon.com/Wireless-Char...r=1-1&keywords=choetech+fast+wireless+charger
First, this is an amazing charger. Choetech always makes good products.
I received this in 2 days and set about testing it.
I was going to make a video showing off this thing fast charging on a Samsung Galaxy Note 5 but I see that there are already 2 excellent videos up showing that. So instead I will show you the things they did not highlight as much.
OK, the quick charge 2.0 wall plug you can get with this is the best one I have ever tried. Just like the other Qualcomm certified chargers, you will get the self adjusting voltages (12v-9v-5v) to give you a super fast charge. The extra you get with this Choetech quick charge 2.0 adapter is the USB port on it is reversible! This is the first charger I have seen with this and I now think everything should have this.
Ok now to the real reason you are reading this. The charging puck itself is a nice clean looking puck.
It is defiantly thicker than the cheapo ones you get for a few dollars. It has some heft to it making it feel more premium.
It has rubber top and bottom to keep both the charger from slipping on your desk or the phone from slipping on top the charger.
It will most defiantly charge your Note 5 or other Samsung devices quickly.
It will also charge your older devices as well. I tested it on a few LG phones in addition to the Note 5.
I noticed no abnormal warmth from the charger or any of the phones I tested this with. This is a very welcome thing as most of my other qi chargers do have heat issues.
One final thing, I tested this charger on my moto 360 and it charged it flawlessly. Most qi chargers fail here and will overheat this watch, this one did not and it charged my moto 360 from 19% to full in about 35 minutes. that is about 15 minutes faster than the stock charger does.
I received this product in exchange for an honest review, this does not affect my opinion of this product.
Redflea said:
"Charges the phone up really quick. As fast as the wire in my opinion."
Thanks for the review.
One comment. When doing a review, other than obvious aesthetic judgements (e.g., does it look cool?), you should be fact based and not offer opinions on something that should be measured if you're going to report on it, like charging speed.
It's like Car and Driver saying it's their opinion that a Mustang can go 180 miles per hour. Their opinion on that isn't relevant, they need to measure the car's top speed to report on it.
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
First time doing one. Thanks for your opinion ?
Sent from my SM-G935T using XDA-Developers mobile app
0verdaflow said:
Whats the price on this ? + how much time does it take to charge ur phone ?? doe the phone heat up ?
Click to expand...
Click to collapse
I got it for about $23 after the discount. Its does make my phone warm. But so does my Samsung wireless charger. I haven't charged it from 0-100 yet. I will soon
Sent from my SM-G935T using XDA-Developers mobile app
I got this exact same charger when they made a mistake on Amazon, giving it out for free after coupon code.
I finally got to try the fast wireless charging, and it heats up even more than the regular speed wireless charger.
It pulls 10-12W from a quick charger power adapter. 9V at 1.2-1.3 amp. Normal speed Qi chargers pull about 5W.
I don't know the wireless transfer efficiency, but I'm guessing they are about the same whether they use 5V or 9V. So, more energy is being transferred but also more energy turning to heat.
I am hesitant to use it without a fan, so I have a USB fan blowing on to the pad and my phone when I use wireless charging.