I bricked my P7310 :( - Galaxy Tab 8.9 General

Hey
Last week i bricked my tablet. I wanted to update to the newest CM Version, because my Tablet had 10 hours for loading. When I entered the CWM, my device crashed. Then came the message, that is should restore the firmware via Kies, but this was impossible cause Kies couldnt identificate my tablet. Now I cant do anything, i cant enter Recovery nor Odin-Mode. I would be very nice if someone can help me.
Greeting from Switzerland
Betschi
PS: I wanted to update from CyanogenMod 10 2012-08-08 Build with ClockworkMod Recovery v5.5.0.4 Version

Related

[Q] [HELP] Error during upgrade

Hi all!
I have a rather major problem.
Today Kies told me that I have a new upgrade for the firmware of my Samsung Galay S i9000. It ran stuck rom with only a few apps installed. I said i want to upgrade so it started to check everything, done a backup of my contacts, started to download the firmware on my PC. So far everything is good.
After that the phone rebooted into an android working logo and said "Downloading..." it stayed like this for a while and after that Kies gave an error. Now the phone is stuck on this screen. Disconecting the device from the usb cable and pluging it back in does't do anything. Kies tries to connect to it but after a couple of minues gives an error that the device is not responding and I should try to rebot the device.
Any idea what to do? This is the work phone so I have to fix this.
Any help is appreciated.
EDIT: Fixed the problem with odin. I know I should get a warning for not searching first...but I panicked.

[Q] Galaxy SIII Mini bootloop - No Recovery Possible

Hey there,
First post on here so apologies if i'm posting in the wrong place or anything
My problem: My Galaxy SIII Mini was running CyanogenMod 11, which I had flashed via Odin a few months ago and it had been working perfectly. Then one morning I took my phone off charge and it would not boot up. I had not installed any apps or packages that could have caused anything to happen recently.
I can get into download mode, but NOT recovery mode.
I have had a browse on some of the forums on here and it seems like a few other users have experienced similar problems. I have tried flashing my stock ROM back onto the phone, but it just goes into a bootloop. I tried flashing both Stock Recovery and CMW Recovery, but the 3 button combo doesn't do anything and my phone just boots normally and then bootloops.
I saw on here a recommendation to install a ROM from a Russian forum that can supposedly fix this issue, but the download link won't work for me.
I also tried flashing a kernel and then recovery, but this didn't work either.
If you have any suggestions or could point me in the right direction I would be very grateful.
Cheers,
Robert

help i might of currupted /boot but download mode works

hi my name is hackmii i need some help
basicaly my samsung galaxy s (i9000) was running very slowly so i got cwm and then installed cm11 snapshot the installion said: installion aborted!: code (0)
then i restarted the phone expecting nothing to been changed then the phone came up with cyanogen(mod)
and then came up with a updated cwm then some error then it restarted and kept doing the same thing then i eventualy got into cwm and tryed restoreing it failed at /boot after that i tried to install cm11 again this time everything went smoothly but then i restarted expecting to see the cyanogenmod boot up but the phone would not get past the samsung galaxy s logo i then tried to get into recovery but it did not work after that i tried download mode that did work. so my question is can i fix my /boot with odin because right now im attempting to flash the stock firmware with odin
any help?
(fingers crossed)
Note i also have a nandroid backup from cwm on my pc on top of that my phone is a orange (carrier) GT-I9000 this is my only phone in a long time and it would really upset me if i couldnt recover it.

Huawie P9 will not take any firmware\Bootloop

Hi
I have been searching through different posts and trying different methods of flashing the correct firmware but nothing works.
Here is what happend.
I have a huawei P9 on Vodaphone in the UK
I unlocked the bootloader and rooted but i could not update to android 7 i just kept getting errors and it was a nightmare to get back to anything below that,
I finally did get back to 6 and all worked fine but it was eva-l09c900 that displayed on my phone and still not updated but i was just happy it was working again so i left it.
I decided a few days ago that i need to update but the same thing happened i got an error and now i am stuck in a boot loop.
I first tried the dload method from a sd card but all firmware i tried failed at 4 or 5%
I then tried to fastboot flash boot.img recovery,img and system.img but still in boot loop
After attempting that i no longer have touch capability
I installed twrp recovery but cant do a thing because touch no longer works
Today i have been trying the huawei update tool method through hisuite
That works right upto about 80% then hisuite crashes just as my phone gives an error.
I am now out of idea's
Please any help would be greatly appreciated
Even knowing what firmware i should be on a huawei P9 from the uk on vodaphone might help because im sure its not c900 but that what i had before i tried to update.
I have tried so many different versions now i dont know anymore .
Thank you
https://forum.xda-developers.com/p9/how-to/guide-debranding-to-c432-updating-to-t3551523
xtcislove said:
https://forum.xda-developers.com/p9/how-to/guide-debranding-to-c432-updating-to-t3551523
Click to expand...
Click to collapse
Hi
Thanks but i cannot flash that firmware it just fails at 5% so i used dc pheonix to flash it
it said flashed successfully but still wont boot it just boots to (your device has been unlocked and cant be trusted) then reboots again
is there anything else i can try from here
jy0un9 said:
Hi
Thanks but i cannot flash that firmware it just fails at 5% so i used dc pheonix to flash it
it said flashed successfully but still wont boot it just boots to (your device has been unlocked and cant be trusted) then reboots again
is there anything else i can try from here
Click to expand...
Click to collapse
Just the same as mine,my phone version is EVA-TL00(chinese cmcc version),and my current number is EVA-TL00C01B182SP01. Now I can't dload any firmware(press volume up+volume down+powerbutton or dail *#*#2846579#*#*),but when I enter ecovery mode,it can check the new version EVA-TL001B198,when connect the wifi downloading ,it update 4%,finally failed.Now I cannot find what it encounter?It is always in the TL00C01B182SP01 version.Can anybody help me solving this problem,thx.
I finally did it i just kept flashing different firmware in dc pheonix until one worked
Thanks though

my reno 4 5g stuck on recovery

Hello everyone please help fix my phone
After trying to do a factory reset, the phone is stuck in recovery mode only
USB update is not accepted
It says that the update is old even though I downloaded the latest update from the official website

Categories

Resources