Database Develop

need help write update script

hello i need your help.
i want to write an update script to make a backup of a file
here is my script, but i have a syntax error
mount("MTD", "system", "/system");
ui_print("Installing system...");
show_progress(0.100000, 0);
set_progress(1.000000);
mv /system/app/Email.apk /system/app/Email.original ;
set_perm_recursive(0, 2000, 0755, 0755, "/system/app/Email.apk");
set_perm_recursive(0, 2000, 0755, 0755, "/system/app/Email.original");
ui_print("ok");
unmount("/system");
Click to expand...
Click to collapse

[Q] CWM Status 6 error on my Rom

Ive been trying to create a rom for personal like ive done before with froyo roms
but when we switched to gingerbread it seems like were now using updater-scripts instead of update-scripts and i keep getting error Status 6 on cwm when i try to install and ive narrowed it down to being the updater script
here is my updater script if anyone could help me see what is wrong
ui print(" +=========================================+");
ui_print(" | Installing Rom..." |");
show_progress(0.200000, 5);
run_program("/sbin/mount", "/system");
run_program("/sbin/mount", "/dev/block/stl10", "/dbdata");
run_program("/sbin/mount", "/dev/block/stl11", "/cache");
run_program("/sbin/mount", "/dev/block/mmcblk0p2", "/data");
ui_print(" | Formatting system |");
delete_recursive("/system");
delete_recursive("/dbdata");
delete_recursive("/cache");
delete_recursive("/data");
package_extract_dir("updates", "/tmp");
set_perm(0, 0, 0777, "/tmp/redbend_ua");
set_perm(0, 0, 0777, "/tmp/wipe");
run_program("/tmp/wipe");
ui_print(" | Extracting apps... |");
package_extract_dir("data", "/data");
set_perm(1000, 1010, 0771, "/data/app");
show_progress(0.500000, 60);
ui_print(" | Installing system files |");
package_extract_dir("system", "/system");
ui_print(" | creating symlinks... |");
symlink("toolbox", "/system/bin/cat", "/system/bin/chmod", "/system/bin/chown", "/system/bin/cmp", "/system/bin/date", "/system/bin/dd" "/system/bin/df", "/system/bin/dmesg", "/system/bin/getevent", "/system/bin/getprop", "/system/bin/hd", "/system/bin/id" "/system/bin/ifconfig", "/system/bin/iftop", "/system/bin/insmod", "/system/bin/ioctl", "/system/bin/ionice", "/system/bin/kill" "/system/bin/ln", "/system/bin/log", "/system/bin/ls", "/system/bin/lsmod", "/system/bin/mkdir", "/system/bin/mount" "/system/bin/mv", "/system/bin/nandread", "/system/bin/netstat", "/system/bin/newfs_msdos", "/system/bin/notify" "/system/bin/printenv", "/system/bin/ps", "/system/bin/reboot", "/system/bin/renice", "/system/bin/rm", "/system/bin/rmdir" "/system/bin/rmmod", "/system/bin/route", "/system/bin/schedtop", "/system/bin/sendevent", "/system/bin/setconsole" "/system/bin/setprop", "/system/bin/sleep", "/system/bin/smd", "/system/bin/start", "/system/bin/stop", "/system/bin/sync" "/system/bin/top", "/system/bin/umount", "/system/bin/vmstat", "/system/bin/watchprops", "/system/bin/wipe");
symlink("/system/xbin/su", "/system/bin/su");
symlink("/system/bin/dumpstate", "/system/bin/dumpmesg");
symlink("/system/bin/debuggerd", "/system/bin/csview");
show_progress(0.200000, 70);
ui_print(" | setting permissions... |");
set_perm_recursive(0, 0, 0755, 0644, "/system");
set_perm_recursive(0, 2000, 0755, 0755, "/system/bin");
set_perm_recursive(0, 0, 0755, 0755, "/system/etc");
set_perm_recursive(0, 0, 0755, 0755, "/system/etc/init.d");
set_perm_recursive(1002, 1002, 0755, 0440, /system/etc/bluetooth);
set_perm_recursive(0, 2000, 0755, 0755, "/system/vendor/bin");
set_perm_recursive(0, 2000, 0755, 0644, "/system/vendor/etc");
set_perm_recursive(0, 2000, 0755, 0644, "/system/vendor/firmware");
set_perm_recursive(0, 2000, 0755, 0755, "/system/xbin");
set_perm(0, 2000, 0755, "/system/vendor");
set_perm(0, 2000, 0755, "/system/vendor/firmware");
set_perm(0, 2000, 0755, "/system/vendor/bin/launch_gps.sh");
set_perm(0, 2000, 0755, "/system/vendor/bin/gpsd");
set_perm(0, 0, 0755, "/system/etc/bluetooth");
set_perm(0, 3003, 02755, "/system/bin/netcfg");
set_perm(0, 3004, 02755, "/system/bin/ping");
set_perm(1002, 1002, 0440, "/system/etc/dbus.conf");
set_perm(1014, 2000, 0550, "/system/etc/dhcpcd/dhcpcd-run-hooks");
set_perm(0, 2000, 0550, "/system/etc/init.goldfish.sh");
set_perm(0, 0, 06755, "/system/xbin/su");
set_perm(0, 0, 06755, "/system/xbin/busybox");
set_perm(0, 0, 06755, "/system/bin/sqlite3");
ui_print(" | installing busybox.... |");
run_program("/system/xbin/busybox", "--install", "-s", "/system/xbin");
ui_print(" | Flashing modem |");
run_program("/tmp/redbend_ua", "restore", "/tmp/modem.bin", "/dev/block/bml12");
ui_print(" | Flashing kernel |");
run_program("/tmp/redbend_ua", "restore", "/tmp/zImage", "/dev/block/bml7");
ui_print(" | Finishing Install | ");
unmount("/data");
unmount("/dbdata");
unmount("/cache");
unmount("/system");
show_progress(0.200000, 0);
ui_print(" +=========================================+");

its the encoding on updater.script
something probably corrupted the encoding on your updater.script (like a Microsoft product editor or something). Change the encoding back to unix and see if that doesn't fix it.
Rob

insink71 said:
something probably corrupted the encoding on your updater.script (like a Microsoft product editor or something). Change the encoding back to unix and see if that doesn't fix it.
Rob
Click to expand...
Click to collapse
holy necro post, dude....

insink71 said:
something probably corrupted the encoding on your updater.script (like a Microsoft product editor or something). Change the encoding back to unix and see if that doesn't fix it.
Rob
Click to expand...
Click to collapse
Its been so long since i had this prob and i still get it... I have a macwhich is paet of prob but ive found a solution thanks')

howtomen said:
Its been so long since i had this prob and i still get it... I have a macwhich is paet of prob but ive found a solution thanks')
Click to expand...
Click to collapse
What was the solution, if you don't mind? I'm having the same issue.
---------- Post added at 09:18 PM ---------- Previous post was at 09:11 PM ----------
Nevermind, found the solution - http://boardreader.com/thread/update_zip_error_status_6_677jjXi0hq.html

In CMW go to "Advanced" panel and then select "Log"
Here you can see where you went wrong and it will specify even the line number so you can easily edit these mistakes.
I recommend Notepad++ for editing these scripts.

Leon1234 said:
In CMW go to "Advanced" panel and then select "Log"
Here you can see where you went wrong and it will specify even the line number so you can easily edit these mistakes.
I recommend Notepad++ for editing these scripts.
Click to expand...
Click to collapse
Haha prob solved but thanks... The issue wasnt a specific to the updater but to what i used to edit it
trolol and awayyy!! Expect typos this is my phone.

Good to hear that.,

Help making an update.zip

I'm trying to make an update.zip file for the ROM I'm working on, I'm signing it using testsign.jar and the instructions here
The updater-binary is from the OTA but I believe this doesn't matter as Safestrap ignores it anyway
The contents of the ZIP are:
Code:
.:
META-INF system
./META-INF:
com
./META-INF/com:
android google
./META-INF/com/android:
metadata
./META-INF/com/google:
android
./META-INF/com/google/android:
update-binary updater-script
./system:
app etc framework
./system/app:
VZWAPNLib.apk VzwDeviceSetup.apk VzwSecureSettings.apk
vzwapnpermission.apk VzwEntitlementService.apk VzwSettingsExt.apk
VZWAPNService.apk vzwPhoneExt.apk
VzwController.apk VzwPhoneService.apk
./system/etc:
gps.conf
./system/framework:
com.motorola.vzw.vmm.helper.jar com.vzw.android.hux.jar
com.motorola.vzw.vmm.util.jar com.vzw.android.jar
com.verizon.phone.jar com.vzw.android.smart.jar
com.vzw.android.gex.jar
The updater script is:
Code:
show_progress(0.500000, 0);
ui_print("Mounting your system...");
mount("ext3", "EMMC", "/dev/block/system", "/system");
ui_print("Starting Installation...");
package_extract_dir("system", "/system");
set_perm_recursive(0, 0, 0755, 0644, "/system");
set_perm_recursive(1002, 1002, 0755, 0440, "/system/etc/bluetooth");
set_perm(0, 0, 0755, "/system/etc/bluetooth");
set_perm(1000, 1000, 0640, "/system/etc/bluetooth/auto_pairing.conf");
set_perm(3002, 3002, 0444, "/system/etc/bluetooth/blacklist.conf");
set_perm(1002, 1002, 0440, "/system/etc/dbus.conf");
set_perm(1014, 2000, 0550, "/system/etc/dhcpcd/dhcpcd-run-hooks");
set_perm(0, 2000, 0550, "/system/etc/init.goldfish.sh");
set_perm(0, 0, 0444, "/system/etc/install-recovery.cfg");
set_perm(0, 2000, 0544, "/system/etc/install-recovery.sh");
set_perm_recursive(0, 0, 0755, 0555, "/system/etc/ppp");
set_perm_recursive(0, 2000, 0755, 0755, "/system/bin");
set_perm_recursive(0, 2000, 0755, 0755, "/system/usr/bin");
set_perm_recursive(0, 2000, 0755, 0755, "/system/vendor/bin");
set_perm_recursive(0, 2000, 0755, 0755, "/system/xbin");
run_program("/tmp/fixperm.sh");
set_perm(0, 3003, 02750, "/system/bin/netcfg");
set_perm(0, 3004, 02755, "/system/bin/ping");
set_perm(0, 1001, 04770, "/system/bin/pppd-ril");
set_perm(0, 2000, 06750, "/system/bin/run-as");
set_perm_recursive(0, 2000, 0755, 0755, "/system/xbin");
set_perm(0, 0, 06755, "/system/bin/su");
show_progress(0.200000, 0);
show_progress(0.200000, 10);
show_progress(0.200000, 10);
show_progress(0.100000, 0);
unmount("/system");
The lines in that script are terminated with LF, not CRLF.
I'm zipping it up and then signing it with: java -classpath testsign.jar testsign CDMA_Patch_V1.2.zip CDMA_Patch_V1.2_signed.zip
But flashing it in safestrap gives an error (Status 4)
Please tell me what I'm doing wrong!

Now I understand why all the threads about this error end with no response or simply "never mind I figured it out", it's because when you figure it out you feel really really stupid and don't want to admit to the error.
So here's the solution:
When you make a zip file using 7zip or similar, if you right click on the folder (say it's called MyPatch) and do "Add to MyPatch.zip", the zip file structure ends up being:
\MyPatch\META-INF
\MyPatch\System
etc.
The structure actually needs to be
\META-INF
\System
etc.
So instead you need to go into the folder, select all, right click, Add to MyPatch.zip
You can then run SignApk.jar on it and the result will be flashable!

/etc/system/snd_soc_msm/snd_soc_msm_2x_fusion3 from Stock ROM

Hi, can anyone post the captioned file from stock roms? i want to compare it with cm/fxp's and see what's the problems with 2nd mic and maybe improve the low volume.
thx!

Android 4.3 FW (10.4.B.0.569)
Go Ahead

trying to push this into cm11 build, stopped by sony ric kernel it seems... tired, try again another day.

maybe i can make this a flashable zip? but how..?

nostupidthing said:
maybe i can make this a flashable zip? but how..?
Click to expand...
Click to collapse
I think you may check This Thread

DoO37 said:
I think you may check This Thread
Click to expand...
Click to collapse
tried, but when i flash it, it says something like "cannot mount /system"... apparently the script needs to adapt...?
here is an example

nostupidthing said:
tried, but when i flash it, it says something like "cannot mount /system"... apparently the script needs to adapt...?
here is an example
Click to expand...
Click to collapse
First You need to edit the META-INF\com\google\android\ "updater-script" file with any text editor (i suggest Notepad++)
and replace the line
Code:
[COLOR="Red"]mount("yaffs2", "MTD", "system", "/system");[/COLOR]
with
Code:
[COLOR="Lime"]mount("ext4", "EMMC", "/dev/block/platform/msm_sdcc.1/by-name/system", "/system");[/COLOR]
Second you should set the right permissions for the file (as for me i don't know what is the right one for system/etc ,i would use the whole "set permission" script from Sijav flashable zip ,it will work anyway
Code:
set_perm_recursive(0, 0, 0755, 0644, "/system");
set_perm_recursive(0, 0, 0755, 0755, "/system/etc/init.d");
set_perm_recursive(0, 2000, 0755, 0755, "/system/bin");
set_perm(0, 3003, 06755, "/system/bin/ip");
set_perm(0, 3003, 02750, "/system/bin/netcfg");
set_perm(0, 3004, 02755, "/system/bin/ping");
set_perm(0, 2000, 06750, "/system/bin/run-as");
set_perm_recursive(1002, 1002, 0755, 0440, "/system/etc/bluetooth");
set_perm(0, 0, 0755, "/system/etc/bluetooth");
set_perm(1000, 1000, 0640, "/system/etc/bluetooth/auto_pair_devlist.conf");
set_perm(3002, 3002, 0444, "/system/etc/bluetooth/blacklist.conf");
set_perm(1002, 1002, 0440, "/system/etc/bluetooth/main.conf");
set_perm(1002, 1000, 0640, "/system/etc/bluetooth/auto_pairing.conf");
set_perm(1002, 1002, 0440, "/system/etc/bluetooth/audio.conf");
set_perm(3002, 3002, 0444, "/system/etc/bluetooth/bt_did.conf");
set_perm(3002, 3002, 0444, "/system/etc/bluetooth/bt_stack.conf");
set_perm(1014, 2000, 0550, "/system/etc/dhcpcd/dhcpcd-run-hooks");
set_perm(0, 0, 0755, "/system/etc/install-recovery.sh");
set_perm(0, 0, 0755, "/system/etc/init.d/99SuperSUDaemon");
set_perm(0, 0, 0755, "/system/etc/init.d");
set_perm_recursive(0, 2000, 0755, 0644, "/system/etc/firmware/wlan");
set_perm(0, 0, 0644, "/system/etc/firmware/wlan/prima/WCNSS_cfg.dat");
set_perm_recursive(0, 0, 0755, 0555, "/system/etc/ppp");
set_perm(0, 2000, 0755, "/system/vendor");
set_perm(0, 2000, 0755, "/system/vendor/camera");
set_perm_recursive(0, 2000, 0755, 0644, "/system/vendor/etc");
set_perm(0, 0, 0644, "/system/vendor/etc/audio_effects.conf");
set_perm(0, 2000, 0755, "/system/vendor/lib");
set_perm(0, 2000, 0755, "/system/vendor/lib/hw");
set_perm(0, 0, 0644, "/system/vendor/lib/libwvdrm_L3.so");
set_perm(0, 0, 0644, "/system/vendor/lib/libwvm.so");
set_perm(0, 0, 0644, "/system/vendor/lib/libWVStreamControlAPI_L3.so");
set_perm_recursive(0, 2000, 0755, 0644, "/system/vendor/lib/drm");
set_perm(0, 0, 0644, "/system/vendor/lib/drm/libdrmwvmplugin.so");
set_perm(0, 2000, 0755, "/system/vendor/firmware");
set_perm(0, 0, 0644, "/system/vendor/firmware/libpn544_fw_c2.so");
set_perm(0, 0, 0644, "/system/vendor/firmware/libpn544_fw_c3.so");
set_perm(0, 0, 0644, "/system/build.prop");
set_perm_recursive(0, 2000, 0755, 0755, "/system/xbin");
set_perm(0, 0, 06755, "/system/bin/su");
set_perm(0, 1000, 0755, "/system/xbin/busybox");
set_perm(0, 0, 0755, "/system/bin/ctrlaltdel");
Third your flashable zip only contains "etc" folder in root ,while it should be in system/etc
Anyway i made it for you ,haven't test it but it should work ,you may try flashing it and don't forget to take backup before flashing

with proper setperm.... : )
edit: handset volume seems better, but 2nd mic (e.g. video record) still work subpar, any idea to improve??

nostupidthing said:
with proper setperm.... : )
edit: handset volume seems better, but 2nd mic (e.g. video record) still work subpar, any idea to improve??
Click to expand...
Click to collapse
I wish that i could help ,but unfortunately i'm still having Locked Bootloader ,and not planning to unlock it till the end of warranty

Downgrading...
nostupidthing said:
with proper setperm.... : )
edit: handset volume seems better, but 2nd mic (e.g. video record) still work subpar, any idea to improve??
Click to expand...
Click to collapse
I had the same 2nd Mic problem with my ZR. It came with the 10.3.1.a.2.67 firmware out of the box. I went ape trying to find a solution since January. Luckily i found a post from user "nigoc" in Sonymobile forums who said downgrading the phone to 10.1.1.A.1.310 (JellyBean 4.1.2) solves the problem. I did it, and heck he was right. My camera now works as expected. All those "streaming-like" sounds in my video recordings are gone and the sound quality is very good.
I'm attaching the /etc/system/snd_soc_msm/snd_soc_msm_2x_fusion3 file from my phone. Hope it works in 4.2.2 :fingers-crossed:

il2stormo said:
I had the same 2nd Mic problem with my ZR. It came with the 10.3.1.a.2.67 firmware out of the box. I went ape trying to find a solution since January. Luckily i found a post from user "nigoc" in Sonymobile forums who said downgrading the phone to 10.1.1.A.1.310 (JellyBean 4.1.2) solves the problem. I did it, and heck he was right. My camera now works as expected. All those "streaming-like" sounds in my video recordings are gone and the sound quality is very good.
I'm attaching the /etc/system/snd_soc_msm/snd_soc_msm_2x_fusion3 file from my phone. Hope it works in 4.2.2 :fingers-crossed:
Click to expand...
Click to collapse
am not having "stream" noise in video recording... but low volume... think it's mainly 2nd mic, which in turn affect noise cancellation functionality.
i guess maybe cm/fxp devs used yuga (xperia z) config on zr, and that's causing a problem???
anyway, too tried to try now, later... later...

with soundfix (http://forum.xda-developers.com/showthread.php?p=52514028)

[HELP] Can you help me with the updater script?

I am making a rom in cwm but I always get the error status of 0 , help me fill in the updater script correctly?
This is the updater script made from cygwin:
Code:
show_progress(0.1, 0);
format("MTD", "system");
mount("MTD", "system", "/system");
format("MTD", "userdata");
package_extract_dir("system", "/system");
symlink("dumpstate", "/system/bin/dumpcrash");
symlink("debuggerd", "/system/bin/csview");
symlink("mksh", "/system/bin/sh");
symlink("toolbox", "/system/bin/touchinput");
symlink("toolbox", "/system/bin/playback");
set_perm_recursive(0, 0, 0755, 0644, "/system");
set_perm_recursive(0, 0, 0777, 0777, "/system/etc/init.d");
set_perm_recursive(0, 2000, 0755, 0755, "/system/bin");
set_perm(0, 3003, 06755, "/system/bin/ip");
set_perm(0, 3003, 02750, "/system/bin/netcfg");
set_perm(0, 3004, 02755, "/system/bin/ping");
set_perm(0, 2000, 06750, "/system/bin/run-as");
set_perm_recursive(1002, 1002, 0755, 0440, "/system/etc/bluetooth");
set_perm(0, 0, 0755, "/system/etc/bluetooth");
set_perm(1000, 1000, 0640, "/system/etc/bluetooth/auto_pairing.conf");
set_perm(3002, 3002, 0444, "/system/etc/bluetooth/blacklist.conf");
set_perm(1002, 1002, 0440, "/system/etc/dbus.conf");
set_perm(1014, 2000, 0550, "/system/etc/dhcpcd/dhcpcd-run-hooks");
set_perm(0, 2000, 0550, "/system/etc/init.goldfish.sh");
set_perm(0, 0, 0544, "/system/etc/install-recovery.sh");
set_perm_recursive(0, 0, 0755, 0555, "/system/etc/ppp");
set_perm_recursive(0, 2000, 0755, 0644, "/system/vendor");
set_perm_recursive(0, 2000, 0755, 0644, "/system/vendor/etc");
set_perm_recursive(0, 0, 0755, 0644, "/system/vendor/firmware");
set_perm(0, 2000, 0755, "/system/vendor/firmware");
set_perm(0, 2000, 0755, "/system/vendor/lib");
set_perm_recursive(0, 2000, 0755, 0755, "/system/xbin");
set_perm(0, 1000, 0755, "/system/xbin/busybox");
run_program("/system/xbin/busybox", "--install", "-s", "/system/xbin");
set_perm(0, 0, 06755, "/system/xbin/su");
symlink("/system/xbin/su", "/system/bin/su");
show_progress(0.1, 10);
show_progress(0.2, 0);
assert(package_extract_file("boot.img", "/tmp/boot.img"),
write_raw_image("/tmp/boot.img", "boot"),
delete("/tmp/boot.img"));
show_progress(0.2, 10);
unmount("/system");
Please i've got always status 0 D:

You should check /cache/recovery/last_log to debug
来自我的 C6902 上的 Tapatalk

This is the error
format("MTD", "system");
mount("MTD", "system", "/system");
format("MTD", "userdata");
and this
assert(package_extract_file("boot.img", "/tmp/boot.img"),
write_raw_image("/tmp/boot.img", "boot"),
delete("/tmp/boot.img"));