[Official Firmware] : SGH-I957 CANADA ICS firmware is live - Galaxy Tab 8.9 General

Here is the link :
SGH-I957D: Canada (Telus)
http://www.hotfile.com/dl/177070840/c205647/I957DUXLI2_I957DTLSLI2_TLS.zip.html
SGH-I957M: Canada (Bell)
http://www.hotfile.com/dl/177071050/1c85133/I957MUXLI2_I957MBMCLI2_BMC.zip.html
SGH-I957R: Canada (Rogers)
http://www.hotfile.com/dl/177100741/9172139/I957RUXLI2_I957RRWCLI2_RWC.zip.html
Note: use Odin to flash this stock firmware.
-KS

They also appeared on the Sammobile Firmware website... and I think these links are the same as those on www.sammobile.com!
What, no SGH-I957R: Canada (Rogers) firmware file?

nrapallo said:
They also appeared on the Sammobile Firmware website... and I think these links are the same as those on www.sammobile.com!
What, no SGH-I957R: Canada (Rogers) firmware file?
Click to expand...
Click to collapse
Link updated for Rogers too..
Sent from my GT-N7100 using Tapatalk 2

kunals.shah said:
Here is the link :
SGH-I957D: Canada (Telus)
http://www.hotfile.com/dl/177070840/c205647/I957DUXLI2_I957DTLSLI2_TLS.zip.html
SGH-I957M: Canada (Bell)
http://www.hotfile.com/dl/177071050/1c85133/I957MUXLI2_I957MBMCLI2_BMC.zip.html
SGH-I957R: Canada (Rogers)
http://www.hotfile.com/dl/177100741/9172139/I957RUXLI2_I957RRWCLI2_RWC.zip.html
-KS
Click to expand...
Click to collapse
Do we flash the file in Odin or in recovery?
Sent from my SGH-I957D using Tapatalk 2

These are odin flashable stock firmwares. .
Sent from my GT-N7100 using Tapatalk 2

kunals.shah said:
These are odin flashable stock firmwares. .
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
Thanks. Do you know if the firmware will come with new radio?
Sent from my SGH-I957D using Tapatalk 2

Yes. It comes with updated radio image.
Sent from my GT-N7100 using Tapatalk 2

So does that mean AT&T 8.9 4g lte will get their update?
If so it's great timing. The iPad mini is being released tomorrow.
That means I can sell this piece of 5hit Samsung AT&T delay device and get an apple.
I'm so pissed of all the delays Samsung has been doing to all their devices.

Great!
---------- Post added at 03:59 PM ---------- Previous post was at 03:47 PM ----------
4.3 said:
So does that mean AT&T 8.9 4g lte will get their update?
If so it's great timing. The iPad mini is being released tomorrow.
That means I can sell this piece of 5hit Samsung AT&T delay device and get an apple.
I'm so pissed of all the delays Samsung has been doing to all their devices.
Click to expand...
Click to collapse
Buying a Ipad? That is stupid!!!

OTA for Canadian Carriers (Telus/Bell/Rogers)
It was reported today on mobilesyrup.com that the Bell, TELUS and Rogers Samsung Galaxy Tab 8.9 LTE upgrade to Ice Cream Sandwich now available.
We know those ICS ROM's are available as per the OP's links, but some of the comments below that article indicate the Canadian Carriers have started OTA upgrades to ICS!!!
It's about time!

kunals.shah said:
Here is the link :
SGH-I957D: Canada (Telus)
http://www.hotfile.com/dl/177070840/c205647/I957DUXLI2_I957DTLSLI2_TLS.zip.html
SGH-I957M: Canada (Bell)
http://www.hotfile.com/dl/177071050/1c85133/I957MUXLI2_I957MBMCLI2_BMC.zip.html
SGH-I957R: Canada (Rogers)
http://www.hotfile.com/dl/177100741/9172139/I957RUXLI2_I957RRWCLI2_RWC.zip.html
Note: use Odin to flash this stock firmware.
-KS
Click to expand...
Click to collapse
If you look in my thread here: http://forum.xda-developers.com/showthread.php?t=1936044
A CSR at Rogers told me their update was released by devs over two weeks ago but no one seemed to be able to download it. I just checked my device and suddenly I have it available as an OTA update. Odd...

Got notic=fication this monring on my tab, and took around 15 min (download + install) get the it upgraded.
New UI, I assume maybe just me, I am too used to honeycomb, it take time for me to get used to the new UI. But I do like the browser with the "desktop view " option. And I can get Chrome on it now as well.

alextheangel said:
Got notic=fication this monring on my tab, and took around 15 min (download + install) get the it upgraded.
New UI, I assume maybe just me, I am too used to honeycomb, it take time for me to get used to the new UI. But I do like the browser with the "desktop view " option. And I can get Chrome on it now as well.
Click to expand...
Click to collapse
Are you att or the Canadian 8.9 i957d?

What about AT&T???????!!!!!!!!

How to root this?

SaHiLzZ said:
How to root this?
Click to expand...
Click to collapse
No way to root do far. And very difficult to find help.

ATT and root
ratatouille said:
No way to root do far. And very difficult to find help.
Click to expand...
Click to collapse
on my ATT ROM SGH-I957D: Canada (Telus) works fine. Working external keyboard Samsung, HDMI, SMS. Root install from TWRP using attached zip.

Hammer_NN said:
on my ATT ROM SGH-I957D: Canada (Telus) works fine. Working external keyboard Samsung, HDMI, SMS. Root install from TWRP using attached zip.
Click to expand...
Click to collapse
You my friend are my idol..... I thank you very much. Did you create that installer yourself?

Hammer_NN said:
on my ATT ROM SGH-I957D: Canada (Telus) works fine. Working external keyboard Samsung, HDMI, SMS. Root install from TWRP using attached zip.
Click to expand...
Click to collapse
Can anyone confirm this method to be a working root with i957 ICS? I just got this thing free from Rogers as yet again they messed up my account. Not concerned with the lack of ROMs as the stock firmware is pretty smooth, but would def like to debloat all the Rogers ****.
Any imput would be appreciated.

I bought ant unlocked Bell Tablet. Can I flash the Rogers original rom on it? I am with Rogers.

Related

[Q] Telstra firmware on AT&T tab?

Hi,
I'm in NY at the moment but I'm headed back to Australia later in the week. The AT&T Galaxy Tab is $649 and the Telstra version is $840. I gather that SIM unlocking either version is not a problem. I spend a fair bit of time in both places. As the Telstra version has voice enabled, I was wondering if it's possible to simply flash the Telstra firmware onto the AT&T Tab? Would this cause any issues? Would it then be essentially an identical device to the Telstra sold tab?
Thanks.
It looks like you will be the first to find out. Sorry couldn't help mate
m_hawk_1 said:
As the Telstra version has voice enabled, I was wondering if it's possible to simply flash the Telstra firmware onto the AT&T Tab? Would this cause any issues? Would it then be essentially an identical device to the Telstra sold tab?
Click to expand...
Click to collapse
Find us Telstra firmware and we can at least test that the phone works here in some way.
I posted a similar Q a while ago. I want to flash my T-mobile Tab into a generic Euro (GT-P1000). After that I would like it to work with upgrades through Kies etc.
If I just understood the risks or pro/cons I would go.
I bought the telstra tab. It is unlocked out of the box and has voice enabled. It uses the same bands as att. So I am guess ing this firmware would work fine on an att tab.
Sent from my GT-P1000T using XDA App
m_hawk_1 said:
I bought the telstra tab. It is unlocked out of the box and has voice enabled. It uses the same bands as att. So I am guess ing this firmware would work fine on an att tab.
Click to expand...
Click to collapse
It should, but please follow my backup thread and backup your existing firmware before you flash the Euro firmware. Someone, maybe even you, may need it someday.
I don't think I will need to flash any other firmware. The telstra firmware has voice calling and side loading enabled out of the box. It is also sim unlocked. I should be able to put my att sim in, change the apn and go!
Sent from my GT-P1000T using XDA App
hi do u have the back up .tar file for your p1000t that u can share with us as i have one my friend brick it some how i am unable to find any p1000t.tar firmware anywhere i needed to get this brick working again, thank u for sharing in advance.
p1000t flash file
hi dear
i need p1000t flash file .can bodey help me.my device after flash by anthoer flash file now samsung logo only.please help me.
rotohammer said:
Find us Telstra firmware and we can at least test that the phone works here in some way.
Click to expand...
Click to collapse
I woild like this to play with
I've used the roto backup from http://forum.xda-developers.com/showthread.php?p=13391743 without any problems a few times when restoring my GT-P1000T back to stock (Telstra).

[Q] to US SGN owners who bought the POLISH ver from HANDTEC

i cant seem to update to 2.3.6.
where you able to update yours? how? OTA? KIES?
can anybody please point me to instruc on how to do it?
thanksalot in advance!!!
jeraldyne c",)
I think mine was the Polish version, and the update finally came through last night - through the phones updater.
thanks for the reply! c",)
did you have the EURO (unbranded) version or the PLUS (polish network) version?
I rooted mine, then put on a custom 2.3.6 ROM (Sheep ROM 1.2)
OTA. Unbranded unit
Initially update wouldn't go through so i went ahead and flashed back to stock from rooted status and applied the update and then root it again
ph00ny said:
OTA. Unbranded unit
Initially update wouldn't go through so i went ahead and flashed back to stock from rooted status and applied the update and then root it again
Click to expand...
Click to collapse
tried OTA update again this morning. still no go.. :-(
RashaMatt said:
I rooted mine, then put on a custom 2.3.6 ROM (Sheep ROM 1.2)
Click to expand...
Click to collapse
wanna stay stock for ICS update later. am an android noob! c",)
its DEC4 now and still no OTA update to 2.3.6 for me! :-(
tanjeraldyne said:
i cant seem to update to 2.3.6.
where you able to update yours? how? OTA? KIES? . . .
Click to expand...
Click to collapse
I received mine from Handtec on November 30, got the OTA update the next day, and it installed fine. Have rooted since then, without difficulty.
It was in Polish when I started it up, but I have no idea what "Plus" version is.
My update is ready, but Im not updating till ICS, or the 1.5 4g lte working on t-mobile.
Sent from my GT-N7000 using xda premium
cushcalc said:
It was in Polish when I started it up, but I have no idea what "Plus" version is.
Click to expand...
Click to collapse
I think Plus is the name of the polish carrier these were branded for.
its DEC 5 and still no OTA update for my unbranded polish ver galaxy note from handtec. :-(
just wanna update to 2.3.6 for the battery usage issue with 2.3.5.
quick questions to the GURUS:
* can i just flash the HONG KONG ROM ZSKK1 (2.3.6) on mine?
* do i need ROOT for that?
would really appreciate the hand-holding! ;-)
getmouse said:
My update is ready, but Im not updating till ICS, or the 1.5 4g lte working on t-mobile.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
U using hot spot for your phone, to catch 4G on tmobile?
tanjeraldyne said:
its DEC 5 and still no OTA update for my unbranded polish ver galaxy note from handtec. :-(
just wanna update to 2.3.6 for the battery usage issue with 2.3.5.
quick questions to the GURUS:
* can i just flash the HONG KONG ROM ZSKK1 (2.3.6) on mine?
* do i need ROOT for that?
would really appreciate the hand-holding! ;-)
Click to expand...
Click to collapse
I used Odin and a copy of the stock ROM to do just that. I was stuck in a mode where kies kept reporting that my phone wasnt supported for upgrades and changing my code to DBT made my phone find tge upgrade, but refuse to install it. I rooted at first and bricked it during a failed upgrade, so I used Odin to drop the HK ROM on it with success.
Sent from my GT-N7000 using Tapatalk
avetny said:
U using hot spot for your phone, to catch 4G on tmobile?
Click to expand...
Click to collapse
Yeah Im using the t-mobile hotspot right now, until I can figure something out.
'Edit' thinking of cancelling or lowering the internet package on my phone and just use the hotspot for now.
My hotspot plan is 2gb for $39.99
and my phone data plan is 2gb for $20.00
Sent from my GT-N7000 using xda premium
I got mine from Handtec yesterday (Dec 6th). Polish version unbranded. I was able to update via OTA. The update notification came through as soon as I connected to wifi.

Xperia Z from Bell Canada (C6616)

Just picked up my Xperia Z from Bell - here's a little information on the device, as after searching for a while there doesn't seem to be much out there about this:
Model Number: C6616
Android Version: 4.1.2
Baseband Version: 9x15A-ACEFWMAZQ-30110041-32
Kernel Version: 3.4.0-g6df7905-02328-g70ed36a
Build: 10.1.1.A.1.319
Customization Version: 1275-6311_R2A
Also, rather unfortunately, the bootloader cannot be unlocked (according to the Service info > Configuration page).
Can you tell us if the screen is better? I saw some videos on the Bell website and it did look better. I was gonna go check out the Bell store today but didn't have time lol
Sent from my C6603 using xda app-developers app
Phat-T said:
Can you tell us if the screen is better? I saw some videos on the Bell website and it did look better. I was gonna go check out the Bell store today but didn't have time lol
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
I don't have a lot to go by in terms of better than other Xperia Z models, but compared to my SGS3 it looks much better and is actually visible in direct sunlight.
Have you tried rooting it and flashing a custom recovery?
l337krew said:
Have you tried rooting it and flashing a custom recovery?
Click to expand...
Click to collapse
Not yet - this is the first Sony device I've owned (used to Samsung devices and the various Nexus'), so I'm a little gun-shy regarding flashing things meant for different models.
Tried rooting it today and, as expected, it failed.
Use DooMLorD to root, I think it should be fine.
Would you be able to backup your rom to FTF file?
Here is the instruction to make ftf file of your rom.
http://forum.xda-developers.com/showthread.php?t=2311211
The update made the screen look a lot better but that was with 253 version already and 4.2.2 made it even somewhat better again and camera too.
Sent from my C6603 using Tapatalk 4 Beta
ngvuanh said:
Use DooMLorD to root, I think it should be fine.
Would you be able to backup your rom to FTF file?
Here is the instruction to make ftf file of your rom.
http://forum.xda-developers.com/showthread.php?t=2311211
Click to expand...
Click to collapse
Tried Doomlord's without luck, but I didn't use the new method to flash the other kernel (was fairly unsure if I would soft-brick it). I'll follow that guide and post the resulting file, though.
FTF Bundle here: http://forum.xda-developers.com/showthread.php?p=44229119
Thank you very much for the ROM.
I am downloading...
laslow said:
FTF Bundle here: http://forum.xda-developers.com/showthread.php?p=44229119
Click to expand...
Click to collapse
---------- Post added at 08:33 PM ---------- Previous post was at 07:48 PM ----------
I flashed its baseband but it didn't work unfortunately.
This Rom only has band 4 LTE also even though Bell says it has AWS and 700.
It couldn't pick up t-mo LTE too.
Sent from my C6606 using Tapatalk 4 Beta
For any other Bell users who are new to Xperia devices and unsure of flashing, I successfully flashed this 4.2.2 stock firmware using Flashtool (left FOTA, BASEBAND, and UNKNOWN unchecked). I had to add the Bell APN settings, but everything works!
Additionally, I rooted using this guide, but when I got to step 11, I reflashed the kernel from the first firmware image I linked instead.
So if I get this one, unlock it and flash standard firmware, can it be used with Rogers and its LTE?
ChrisMCP said:
So if I get this one, unlock it and flash standard firmware, can it be used with Rogers and its LTE?
Click to expand...
Click to collapse
Rogers and Bell both use the same LTE bands, so it should be good with the network unlock. Switching firmware is really only required for rooting/getting 4.2.2 at this time.
laslow said:
Rogers and Bell both use the same LTE bands, so it should be good with the network unlock. Switching firmware is really only required for rooting/getting 4.2.2 at this time.
Click to expand...
Click to collapse
So bell's firmware is standard or it's a custom one with bell's apps per-intalled (aka you have to wait for them to release a new version 2-3 weeks after everyone else gets it)?
Bell's firmware has their apps, and is subject to their release schedule, but will work with other carriers - it's just the network lock that prevents you from using another carrier. However, if you're looking to root, or don't want the extra Bell branding in your face, switching firmware is a valid option.
laslow said:
Bell's firmware has their apps, and is subject to their release schedule, but will work with other carriers - it's just the network lock that prevents you from using another carrier. However, if you're looking to root, or don't want the extra Bell branding in your face, switching firmware is a valid option.
Click to expand...
Click to collapse
Yeah I'm not a big fan of bell's branding tbh, because all my services are with rogers. But what is difference between 6606 and 6616, do you know by any chance? thx
ChrisMCP said:
Yeah I'm not a big fan of bell's branding tbh, because all my services are with rogers. But what is difference between 6606 and 6616, do you know by any chance? thx
Click to expand...
Click to collapse
Never used the 6606, or any of the other models. From the looks of things, though, it's a difference in basebands and supported frequencies.
laslow, I flashed baseband off the ftf file you posted, there is only band 4 LTE, not 700 (band 17) as stated on Bell website.
Sent from my C6606 using Tapatalk 4
I'm not running it anymore so I can't verify, but that was the firmware bundle on the phone, fresh from the store.

UK MK7 to US MK7?

I installed the UK MK7 update weeks ago and want to switch back to the US now that it's available to get Exchange previews back. What's the CSC code for the US? Kies won't update since it says I already have MK7. Is there another place to download the new ROM? Can I downgrade to an older US ROM and let Kies update that way? I would, but I can't find even the old US ROMs.
Lucent said:
I installed the UK MK7 update weeks ago and want to switch back to the US now that it's available to get Exchange previews back. What's the CSC code for the US? Kies won't update since it says I already have MK7. Is there another place to download the new ROM? Can I downgrade to an older US ROM and let Kies update that way? I would, but I can't find even the old US ROMs.
Click to expand...
Click to collapse
Yes you can downgrade, Here is the thread where you can get the USA version. (OLD)
XAR is the USA version - Last one in the list (Labled as Cellular South)
Also you can go here and get the current version, Currently the top one in the list.
almulder1092 said:
Yes you can downgrade, Here is the thread where you can get the USA version. (OLD)
XAR is the USA version - Last one in the list (Labled as Cellular South)
Also you can go here and get the current version, Currently the top one in the list.
Click to expand...
Click to collapse
Was thinking the same thing but wondering if it even makes sense to do? If the UK gets another update (which I assume will be before the US again) won't Gear Manager download it to my UK rom first?
I decided to reload the old ROM and re-upgrade not being sure if were differences. I had some wierdness after loading the old ROM which I suspect was program updates intended for the new ROM. You might want to do a reset to wipe the gear before dropping back to the old version.
Having done so, though, I used Kies to upload the new US ROM and it all went fine. I am now on the US MK7 and all seems well.
Sent from my Nexus 10 using XDA Premium 4 mobile app
jaltman said:
I decided to reload the old ROM and re-upgrade not being sure if were differences. I had some wierdness after loading the old ROM which I suspect was program updates intended for the new ROM. You might want to do a reset to wipe the gear before dropping back to the old version.
Having done so, though, I used Kies to upload the new US ROM and it all went fine. I am now on the US MK7 and all seems well.
Sent from my Nexus 10 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So, are the UK and US MK7 firmware versions identical?
Sent from my SAMSUNG-SM-N900A using xda app-developers app
I see no discernable differences on the surface. Under the hood, I can't tell. It seems unlikely to me that different versions would be left with the version number. Time will tell.
Sent from my Nexus 10 using XDA Premium 4 mobile app
How can I tell which version of the MK7 software is installed the Us or the UK. I did both on two devices and don't know if there is a way to.tell
Sent from my SM-N900P using Tapatalk
67srbell said:
So, are the UK and US MK7 firmware versions identical?
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
I did notice s voice on the great activates a lot quicker, I'm coming from uk mk7, odin'ed to us mk7. Synched to a gs3
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
almulder1092 said:
Yes you can downgrade, Here is the thread where you can get the USA version. (OLD)
XAR is the USA version - Last one in the list (Labled as Cellular South)
Also you can go here and get the current version, Currently the top one in the list.
Click to expand...
Click to collapse
Thanks for this information, as I was not sure I was on the UK or the US version, having flashed the UK rom, but then being unsure if what appeared to be an update recently actually was. I am in USA and on the XAR version now. All have been working great with Exchange and other notifications.
Same size
I opened both .tar files (XAR from USA and BTU from UK) and they have the same exact size on all their subfolders (not a single Byte more, not a single Byte less) I assume they are the same firmware. Why Sammy took too long to update USA firmware? Weird right?
danyvw said:
I opened both .tar files (XAR from USA and BTU from UK) and they have the same exact size on all their subfolders (not a single Byte more, not a single Byte less) I assume they are the same firmware. Why Sammy took too long to update USA firmware? Weird right?
Click to expand...
Click to collapse
Perhaps it was the anticipated load on their servers.
almulder1092 said:
Yes you can downgrade, Here is the thread where you can get the USA version. (OLD)
XAR is the USA version - Last one in the list (Labled as Cellular South)
Also you can go here and get the current version, Currently the top one in the list.
Click to expand...
Click to collapse
OMG, thanks for this almulder! It is not clear on Null Gear Recover pagethat all the US people are being sent to a link to download MK2 version which gives the scrunched recovery view. I'm still figuring this out, but this post makes things a lot easier.
TWRP LOOP
almulder1092 said:
Yes you can downgrade, Here is the thread where you can get the USA version. (OLD)
XAR is the USA version - Last one in the list (Labled as Cellular South)
Also you can go here and get the current version, Currently the top one in the list.
Click to expand...
Click to collapse
Hi.. Tried flashing null-19, All go's well until reboot then just reboots into TWRP all the time.. Can you help please
Rom (V700XXUAMK7)
Recovery (null_03_TWRP2.7.tar.md5)
Flashing Rom (null_ 19.zip)
Impactor_0.9.14
Thanks in advance
almulder1092 said:
Yes you can downgrade, Here is the thread where you can get the USA version. (OLD)
XAR is the USA version - Last one in the list (Labled as Cellular South)
Also you can go here and get the current version, Currently the top one in the list.
Click to expand...
Click to collapse
Omfg! Thank you so much almulder, I was finally able to upgrade my gear to mk7 thru odin, kies kept freezing on me & gear manager was no help either :-/ this is why I love the android/xda community sooooo much, people like you who are always here to help
Sent from my SM-N900T using XDA Premium 4 mobile app

anyone got an update for one ui 2.5 att?

As the title suggests, I haven't been able to find anything just tmoble
From what i understood while helping a few snapdragon users, AT&T firmware handling is done through them and not Samsung. Considering how snapdragon is a month or two slower on releases to Exynos, with AT&T you seem to get another layer of delay.
Nevertheless, you can always flash the Unlocked (SM-N960U1 XAA) firmware to it, but i would assume you'd lose a few AT&T features specific to their CSC.
Have been looking for any US based version of the update and still nothing yet. Hope we see something soon. I will be honest I want wireless DeX.
Weirdly, AT&T got 2.5 yesterday, before the unlocked one.
PlutoDelic said:
Weirdly, AT&T got 2.5 yesterday, before the unlocked one.
Click to expand...
Click to collapse
Strange I can't get it on my AT&T phone
macgyver40 said:
Strange I can't get it on my AT&T phone
Click to expand...
Click to collapse
Sprint dropped their's yesterday
ronnie498 said:
Sprint dropped their's yesterday
Click to expand...
Click to collapse
I have the sprint version downloading. Just need to remember if all US based version work for all US phones or if there are exceptions. My old brain can't remember lol.
macgyver40 said:
I have the sprint version downloading. Just need to remember if all US based version work for all US phones or if there are exceptions. My old brain can't remember lol.
Click to expand...
Click to collapse
Working on my tmo n9, yes it works on all n960u
ronnie498 said:
Working on my tmo n9, yes it works on all n960u
Click to expand...
Click to collapse
I thought so but with 2020 and now most of my time on the Tab S7 I wasn't 100% Thanks. Going to check the download and then debate doing this at midnight.
Did anyone on non rooted T mobile Note 9 get UI 2.5 official update?
roundel77 said:
Did anyone on non rooted T mobile Note 9 get UI 2.5 official update?
Click to expand...
Click to collapse
T-mobile hasn't released yet
macgyver40 said:
Strange I can't get it on my AT&T phone
Click to expand...
Click to collapse
Yep seems to be my problem also
Dr.Lost said:
Yep seems to be my problem also
Click to expand...
Click to collapse
I just flashed the sprint version at 2am lol. Got it up and running now.
macgyver40 said:
I just flashed the sprint version at 2am lol. Got it up and running now.
Click to expand...
Click to collapse
I will try that, I had trouble with forgetting to take my aim out after doing the xaa firmware so I'm stuck with art again
Just got an update here in brasil with October security patch, it's not 2.5.....
QP1A.190711.020.N9600ZHS5ETJ4
relies said:
Just got an update here in brasil with October security patch, it's not 2.5.....
QP1A.190711.020.N9600ZHS5ETJ4
Click to expand...
Click to collapse
No SM-N9600 has got One UI 2.5 yet. The latest one is TGY (Hong Kong) ETJ5, but that's still One UI 2.1. We still have to wait for a FXXX firmware.
I'm on Spectrum and this is the latest in the month I've gone without an update. Im guessing there was a bug in first build, maybe thats why the release of the 2nd and the delay?
Have just used Odin to install the Sprint firmware on my Xfinity Mobile phone, install went smooth as silk, even Good Lock wasn't knocked out.
pTeronaut said:
Have just used Odin to install the Sprint firmware on my Xfinity Mobile phone, install went smooth as silk, even Good Lock wasn't knocked out.
Click to expand...
Click to collapse
I haven't been able to find a sprint firmware could you post a link? I'm on att so I could try it and just change my csc
Dr.Lost said:
I haven't been able to find a sprint firmware could you post a link? I'm on att so I could try it and just change my csc
Click to expand...
Click to collapse
You can download it using Frija.

Categories

Resources