Database Develop

HELP! Su was in the folder but device not found!

I followed the instructions exactly but now device not found and I folowed the video exactly, su is in the folder (((
adb shell
rm -r /data/local/tmp
ln -s /data/ /data/local/tmp
exit
adb reboot
adb shell
echo 'ro.kernel.qemu=1' > /data/local.prop
exit
abd reboot
adb shell mount -o remount,rw /system
adb push su /system/xbin/su
The adverts are back on the screen, what do I do please
Its nearly 2am in the morning

device is found now, what point do I pick up the command prompts up at?
please

Rovers82517 said:
please
Click to expand...
Click to collapse
ah, man, I'm seriously lost, it fails everytime with these 2 commands,
adb shell mount -o remount,rw /system
adb push su /system/xbin/su
the su file is definately in the platform-tools folder :/

Rovers82517 said:
ah, man, I'm seriously lost, it fails everytime with these 2 commands,
adb shell mount -o remount,rw /system
adb push su /system/xbin/su
the su file is definately in the platform-tools folder :/
Click to expand...
Click to collapse
If your drivers are installed correctly now, use the root tool in development section. Then there are no mistakes. If you insist on the manual method though, you need to put the su file and superuser.apk in your folder titled carol and Start over completely

onemeila said:
If your drivers are installed correctly now, use the root tool in development section. Then there are no mistakes. If you insist on the manual method though, you need to put the su file and superuser.apk in your folder titled carol and Start over completely
Click to expand...
Click to collapse
the files are in there, I've checked and double checked.
when I can get it to see the device again the command prompt has a # instead of a $
I can't afford to brick this thing, I don't know of any other methods, can you tell me what you mean or post the link?
It's gone 2am now I could do with even a little sleep tonight
Thank you for replying
ah, my bad, I know what tool you mean cheers dude

Rovers82517 said:
the files are in there, I've checked and double checked.
when I can get it to see the device again the command prompt has a # instead of a $
I can't afford to brick this thing, I don't know of any other methods, can you tell me what you mean or post the link?
It's gone 2am now I could do with even a little sleep tonight
Thank you for replying
ah, my bad, I know what tool you mean cheers dude
Click to expand...
Click to collapse
No problem, sometimes it just takes a lot of banging your head.

still no luck
I've copied both files to 'carol' as well as platform-tools, what have I done wrong?

Fixed but I'm not sure how
It repeatedly said file not found but in the end I decided to skip to step 4 on QemuRoot and it had worked lol very strange
Think I'll leave it a while before I attempt custom roms lol
Thanks for your help peeps

Rovers82517 said:
It repeatedly said file not found but in the end I decided to skip to step 4 on QemuRoot and it had worked lol very strange
Think I'll leave it a while before I attempt custom roms lol
Thanks for your help peeps
Click to expand...
Click to collapse
From my personal experience is best way how to root kindle fire by qemu (development part of forum) its quite easy... to solve problem if your device isn't found I had to create folder .android in my “documents“ like it is when you will instantly sdk
You have to create it via command line... mkdir .android
Create there required file how it is described in qemu thread. Reinstal kindle adb drivers and try qemu once more.. that worked for me like a charm.
Tomorrow when I will be on PC I will post step by step guide
Kerbik

Root/Android JB Kindle fire 10.2.3

So for the last 7 hours i've been researching how to root/ install JB or another rom onto this brand new kindle i have running 10.2.3.
I've got ADB running and i've tried Sparkym3 and a few other root methods and i keep getting permission denied when i go to write fbmode or su
SO i'm at a loss, i'd really like to get this installed and working for my handicapped father's new kindle, its his xmas gift, and i know i'd prefer he be able to use google play and stuff.
Any help would be fantastic, this is really rattling my brain.

Unfortunately, you're out of luck with a custom ROM/Jelly Bean, but you can gain access to the play store and lose the ads with root. I tried the automated method in the link below with no success. The qemu tool just quit after step two.
Is this the method you tried?
http://forum.xda-developers.com/showthread.php?t=1893838
I just followed this video to the letter, and I was golden. HOWEVER, I was on 10.2.1. I don't know if it will work with .3. Keep me posted because my other daughter's KF2 received the update before I attempted root, and I haven't attempted root on it yet . I renamed the otacert.zip file to prevent the update on the alreay-rooted tablet.
http://forum.xda-developers.com/showthread.php?t=1891939

scubamike said:
Unfortunately, you're out of luck with a custom ROM/Jelly Bean, but you can gain access to the play store and lose the ads with root. I tried the automated method in the link below with no success. The qemu tool just quit after step two.
Is this the method you tried?
http://forum.xda-developers.com/showthread.php?t=1893838
I just followed this video to the letter, and I was golden. HOWEVER, I was on 10.2.1. I don't know if it will work with .3. Keep me posted because my other daughter's KF2 received the update before I attempted root, and I haven't attempted root on it yet . I renamed the otacert.zip file to prevent the update on the alreay-rooted tablet.
http://forum.xda-developers.com/showthread.php?t=1891939
Click to expand...
Click to collapse
The commands:
adb shell
rm -r /data/local/tmp
ln -s /data/ /data/local/tmp
exit
adb reboot
adb shell
echo 'ro.kernel.qemu=1' > /data/local.prop
exit
abd reboot
adb shell mount -o remount,rw /system
adb push su /system/xbin/su
adb shell
chown 0.0 /system/xbin/su
chmod 06755 /system/xbin/su
rm /data/local.prop
exit
adb reboot
adb install Superuser.apk
^^^ Method i tried, and failed, wont allow remount, gives me permission denied, i didnt try Qemu at all.
If i could get access to play store i'd be fine keeping it on stock, i just want my dad to be able to use this thing with standard apps.
I think this method is strictly for the kindle fire HD and i'm trying to do it on a standard Kindle Fire.

Hi there,
I,ve got the same issue with my brand new KF Gen2 FW 10.2.3. During the 1st run everythings seems fine (all commands were accepted),
but in the end I was not able to get root access by the superuser-app.
After that I decided to reset the device to factory defaults, but now I'm not able to create any file under /data (echo 'ro.kernel.qemu=1' > /data/local.prop).
Has anyone a good idea which way we have to choose to get root access on the KF2 (FW10.2.3)?
Thanks yanzz

yanzz said:
Hi there,
I,ve got the same issue with my brand new KF Gen2 FW 10.2.3. During the 1st run everythings seems fine (all commands were accepted),
but in the end I was not able to get root access by the superuser-app.
After that I decided to reset the device to factory defaults, but now I'm not able to create any file under /data (echo 'ro.kernel.qemu=1' > /data/local.prop).
Has anyone a good idea which way we have to choose to get root access on the KF2 (FW10.2.3)?
Thanks yanzz
Click to expand...
Click to collapse
My device lets me punch in the echo command but once i hit mount or push i'll get permission denied so i'm at a loss myself. I hope one of these higher end techies can help us make this happen before Christmas time or my dads kindle stays stock :crying:

I actually was able to root my 10.2.1 yesterday, but overnight it appears to have upgraded itself to 10.2.3, and now it's unrooted again.
The original technique to root fails on this step:
<code>
[email protected]:/ $ echo 'ro.kernel.qemu=1' > /data/local.prop
echo 'ro.kernel.qemu=1' > /data/local.prop
/system/bin/sh: cannot create /data/local.prop: Permission denied
</code>
Anyone have any luck?
I'd love any ideas to override the bootloader on thing, since I'm about sick and done with the stock rom.

arcymag said:
I actually was able to root my 10.2.1 yesterday, but overnight it appears to have upgraded itself to 10.2.3, and now it's unrooted again.
The original technique to root fails on this step:
<code>
[email protected]:/ $ echo 'ro.kernel.qemu=1' > /data/local.prop
echo 'ro.kernel.qemu=1' > /data/local.prop
/system/bin/sh: cannot create /data/local.prop: Permission denied
</code>
Anyone have any luck?
I'd love any ideas to override the bootloader on thing, since I'm about sick and done with the stock rom.
Click to expand...
Click to collapse
If you put the 10.2.1 rom back in the kindleupdates folder on the SDCard and go the setting to update the kindle I wonder if it will reset back to 10.2.1. Atleast you could re-root and then try to block the OTA so it wont go back to 10.2.3.

bodi524 said:
If you put the 10.2.1 rom back in the kindleupdates folder on the SDCard and go the setting to update the kindle I wonder if it will reset back to 10.2.1. Atleast you could re-root and then try to block the OTA so it wont go back to 10.2.3.
Click to expand...
Click to collapse
I tried that last night, but it didn't work for me. Does anyone know if the .bin files from Amazon are flashable through fastboot... It would definitely be worth building/buying a factory cable if we could fastboot flash back to 10.2.1, root, and block ota updates.

Not to beat a dead horse but I am having the same trouble with Kindle Fire 2. Lost Root access last night when Amazon pushed 10.2.3. I tried to down-date to 10.2.1 but the .bin file keeps getting deleted from the kindleupdates folder after I press the update button in "settings-device-about". Unfortunately I learned about disabling automatic updates a little too late. Thank you in advance for helping us out. We are not worthy.

arcymag said:
I actually was able to root my 10.2.1 yesterday, but overnight it appears to have upgraded itself to 10.2.3, and now it's unrooted again.
The original technique to root fails on this step:
<code>
[email protected]:/ $ echo 'ro.kernel.qemu=1' > /data/local.prop
echo 'ro.kernel.qemu=1' > /data/local.prop
/system/bin/sh: cannot create /data/local.prop: Permission denied
</code>
Anyone have any luck?
I'd love any ideas to override the bootloader on thing, since I'm about sick and done with the stock rom.
Click to expand...
Click to collapse
Thats exactly where it fails for me :/
Oh kindle hacking gods have mercy on us.

xiastro1ix said:
Thats exactly where it fails for me :/
Oh kindle hacking gods have mercy on us.
Click to expand...
Click to collapse
I am willing to try the hack posted for the 8.9" bootloader.
However I want to know the restore process works first.
If someone will pull the partitions to restore, zip them and post them I will try the backup on my KindleFire2.
See Here:
http://forum.xda-developers.com/showthread.php?t=2032822
Mine is bricked as of now so trying to restore it won't harm it anymore that it already is.
Once we having a working restore I will try the bootloader crack....and in an exchange with
Hashcode he said he thinks the Original KF roms will then work (WITH SOME KERNEL CHANGES)
for the KindleFire2.

this thread
http://forum.xda-developers.com/showthread.php?t=2033297
claims that they've got root working on the current version, but I tried and it doesn't even recognize my device is plugged in. Several confirmations in that thread that people have it working though.

confrmed root access on 10.2.3
http://forum.xda-developers.com/showthread.php?t=2033297
Just completed hooray!
Now to replace ROM
well it claims its rooted and it has super user installed, but i still cant get past permission denied messages when trying to go ahead and get a new rom on it.
Not sure what to do here, i want to get google aps on it and i'll be fine, but i don't know what file explorer would be good for the stock rom that i can get through the amazon store :\
I'm actually not sure if it is rooted, the first method installed SU onto the phone, but i don't actually see the second portion processing the exploit, its getting permission denied aswell, the kindle has superuser on it, but now i'm completely lost, i still cant get it to do anything....
Edit- ALL DONE YAY
Got googleplay and 1mobile installed, just had to purchase ES file explorer and play around a bit

Any idea why I can't seem to get past these root methods even seeing my kindle is plugged in? I KNOW one of the methods came bundled with some kinda drivers ... I'm just at a loss for what I'm doing wrong because I've tried all sorts of stuff from various posts and instructions...
Running Win7 x64 if that helps any.

Trendy Ideology said:
Any idea why I can't seem to get past these root methods even seeing my kindle is plugged in? I KNOW one of the methods came bundled with some kinda drivers ... I'm just at a loss for what I'm doing wrong because I've tried all sorts of stuff from various posts and instructions...
Running Win7 x64 if that helps any.
Click to expand...
Click to collapse
Step one is getting ADB hooked up and installed on your computer
if youre telling me your computer is seeing "kindle" then youre already doing it wrong. In order for these methods to work upon plugging in your kindle, device manager should say Android- ADB composite device, or something along those lines,

xiastro1ix said:
Step one is getting ADB hooked up and installed on your computer
if youre telling me your computer is seeing "kindle" then youre already doing it wrong. In order for these methods to work upon plugging in your kindle, device manager should say Android- ADB composite device, or something along those lines,
Click to expand...
Click to collapse
I was trying to use the ADB drivers found here,
http://forum.xda-developers.com/showthread.php?t=1893838
but when installed they didn't say anything like that in the final step that showed me what was installed, it said amazon kindle somethingorother.
Device manager went from showing
Portable devices
|
_ Kindle
To now
Kindle Fire
|
_ Kindle
Installing the driver manually gets me something that looks like ADB Kindle Fire but now it doesn't show up in My Computer at all, and the root with restore
http://forum.xda-developers.com/showthread.php?t=1886460
doesn't "see" my kindle...
I'm rather lost.
Here's a log of as far as I've gotten so far:
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry (thanks to Goroh_kun and tkymgr for the idea) =
= Idea for Tablet S from Fi01_IS01 =
= (22.11.2012) v17 =
======================================================================
Device type:
1) Normal
2) Special (for example: Sony Tablet S, Medion Lifetab)
x) Unroot
Make a choice: 1
Checking if i should run in Normal Mode or special Sony Mode
Please connect your device with USB-Debugging enabled now
remote object '/system/app/Backup-Restore.apk' does not exist
remote object '/system/bin/ric' does not exist
.
.
Normal Mode enabled!
.
Pushing busybox....
failed to copy 'stuff/busybox' to '/data/local/tmp/./busybox': Permission denied
Pushing su binary ....
failed to copy 'stuff/su' to '/data/local/tmp/./su': Permission denied
Pushing Superuser app
failed to copy 'stuff/Superuser.apk' to '/data/local/tmp/./Superuser.apk': Permi
ssion denied
Making busybox runable ...
Unable to chmod /data/local/tmp/busybox: No such file or directory
.
Please look at your device and click RESTORE!
If all is successful i will tell you, if not this shell will run forever.
Running ...
Successful, going to reboot your device in 10 seconds!
error: device not found
Waiting for device to show up again....
Going to copy files to it's place
/system/bin/sh: /data/local/tmp/busybox: not found
You can close all open command-prompts now!
After reboot all is done! Have fun!
Bin4ry
Press any key to continue . . .
It's only "Seeing" my kindle if I power it down, plug in the USB, and then it seems to "catch" it while it's booting up. And it remains caught until the tool lets go of it and then it goes to the lock screen as normal.
on this step
Please look at your device and click RESTORE!
If all is successful i will tell you, if not this shell will run forever.
I get no restore option, probably because my kindle is in a booting state when this is all happening.

I was able to root my Kindle Fire 2 on 10.2.3 doing a combination of:
http://forum.xda-developers.com/showthread.php?t=1891939
and
http://forum.xda-developers.com/showthread.php?t=1894717
adb shell
rm -r /data/local/tmp
ln -s /data/ /data/local/tmp
exit
adb reboot
This step in red no longer works!
adb shell
echo 'ro.kernel.qemu=1' > /data/local.prop
exit
Instead do...
4) Restore the fake "backup": adb restore fakebackup.ab Note: do not click restore on your device. Just enter the command into the command prompt on your PC and press the enter key.
5) Run the "exploit": adb shell "while ! ln -s /data/local.prop /data/data/com.android.settings/a/file99; do :; done" Note: when you enter this command, you should see your adb window flooded with errors -- this is what is supposed to happen.
6) Now that the "exploit" is running, click restore on your device.
7) Once it finishes, reboot your device: adb reboot Note: Do not try and use your device when it reboots. Running this exploit will reboot your device into emulator mode, so it will be laggy and the screen will flicker -- this is normal.
adb shell mount -o remount,rw /system
adb push su /system/xbin/su
adb shell
chown 0.0 /system/xbin/su
chmod 06755 /system/xbin/su
rm /data/local.prop
exit
adb reboot
adb install Superuser.apk

Deflection said:
I was able to root my Kindle Fire 2 on 10.2.3 doing a combination of:
http://forum.xda-developers.com/showthread.php?t=1891939
and
http://forum.xda-developers.com/showthread.php?t=1894717
adb shell
rm -r /data/local/tmp
ln -s /data/ /data/local/tmp
exit
adb reboot
This step in red no longer works!
adb shell
echo 'ro.kernel.qemu=1' > /data/local.prop
exit
Instead do...
4) Restore the fake "backup": adb restore fakebackup.ab Note: do not click restore on your device. Just enter the command into the command prompt on your PC and press the enter key.
5) Run the "exploit": adb shell "while ! ln -s /data/local.prop /data/data/com.android.settings/a/file99; do :; done" Note: when you enter this command, you should see your adb window flooded with errors -- this is what is supposed to happen.
6) Now that the "exploit" is running, click restore on your device.
7) Once it finishes, reboot your device: adb reboot Note: Do not try and use your device when it reboots. Running this exploit will reboot your device into emulator mode, so it will be laggy and the screen will flicker -- this is normal.
adb shell mount -o remount,rw /system
adb push su /system/xbin/su
adb shell
chown 0.0 /system/xbin/su
chmod 06755 /system/xbin/su
rm /data/local.prop
exit
adb reboot
adb install Superuser.apk
Click to expand...
Click to collapse
I have a new Kindle Fire (1st gen) and all your steps were perfect until I tried to install the SuperUser.apk where it says I dont have permissions to copy to /data/tmp... ans fails to install superuser.
Any ideas? Maybe chmod of /data getting in emulator mode?
Thanks

reyvaj said:
I have a new Kindle Fire (1st gen) and all your steps were perfect until I tried to install the SuperUser.apk where it says I dont have permissions to copy to /data/tmp... ans fails to install superuser.
Any ideas? Maybe chmod of /data getting in emulator mode?
Thanks
Click to expand...
Click to collapse
There is a whole forum for kf1. Kf1 runs 6.something not 10.2...

Hi, i need help, i want root my kindle fire first generation 7 on 10.2.3_user_2313820 sw version, many thanks

[Q] Can i Cancel updating?

I did something stupid, which involved not staying up to date with the news on my kindle hd 7 inch since i got comfortable with my setup and hadn't really done anything much to it lately that needed me going to the forums. Anyways, my kindle decided to download the ota update, which was like a slap in the face because 3/27 was my birthday and I was in the middle of reading manga and it rebooted then tried to update so I naturally held the power button down. Is there anyway to cancel the update via adb? I typically leave adb on as a precaution to any problem I might have. I thought maybe I could run a shell and tell it to remove the update file which I'm assuming is still in /sdcard/kindleupdates (I think thats the folder name), and maybe push the 7.2.3 update as a precaution in case it started to flash already and I didn't notice. I don't want to turn it back on until I know that I can connect to it with adb because I don't want it to update, I planned on flashing cm10 to it whenever it became stable, and I heard the latest update will break the ability for me to put a bootloader on it. Any help would be appreciated.

stunts513 said:
I did something stupid, which involved not staying up to date with the news on my kindle hd 7 inch since i got comfortable with my setup and hadn't really done anything much to it lately that needed me going to the forums. Anyways, my kindle decided to download the ota update, which was like a slap in the face because 3/27 was my birthday and I was in the middle of reading manga and it rebooted then tried to update so I naturally held the power button down. Is there anyway to cancel the update via adb? I typically leave adb on as a precaution to any problem I might have. I thought maybe I could run a shell and tell it to remove the update file which I'm assuming is still in /sdcard/kindleupdates (I think thats the folder name), and maybe push the 7.2.3 update as a precaution in case it started to flash already and I didn't notice. I don't want to turn it back on until I know that I can connect to it with adb because I don't want it to update, I planned on flashing cm10 to it whenever it became stable, and I heard the latest update will break the ability for me to put a bootloader on it. Any help would be appreciated.
Click to expand...
Click to collapse
You can find here instructions on how to disable OTA services:
Code:
adb shell su -c "busybox mount -o remount,rw /system"
adb shell su -c "mount -o rw,remount /dev/block/mmcblk0p1 /system"
adb shell su -c "pm disable 'com.amazon.dcp/.ota.OTAUpdateMessageHandler'"
adb shell su -c "pm disable 'com.amazon.dcp/.ota.InventoryUploadService'"
adb shell su -c "pm disable 'com.amazon.dcp/.ota.UpdatesLookupService'"
adb shell su -c "pm disable 'com.amazon.dcp/.ota.OTAService'"
adb shell su -c "pm disable 'com.amazon.dcp/.ota.AppStateMonitorService'"
adb shell su -c "pm disable 'com.amazon.dcp/.ota.CheckForOTAUpdatesService'"
adb shell su -c "pm disable 'com.amazon.dcp/.ota.ViewUpdateActivity'"
adb shell su -c "pm disable 'com.amazon.dcp/.ota.OTAStatusActivity'"
adb shell su -c "pm disable 'com.amazon.dcp/.ota.ResetOTAMessageHandler'"
adb shell su -c "pm disable 'com.amazon.dcp/.ota.InventoryUploadService$InventoryUploadReceiver'"
adb shell su -c "pm disable 'com.amazon.dcp/.ota.UpdatesLookupService$MountStatusChangedReceiver'"
adb shell su -c "pm disable 'com.amazon.dcp/.ota.OTAService$OTAWakeupReceiver'"
adb shell su -c "pm disable 'com.amazon.dcp/.ota.OTAService$OTADedupeReceiver'"
adb shell su -c "pm disable 'com.amazon.dcp/.ota.OTAService$OTAInstallNowReceiver'"
adb shell su -c "busybox mount -o remount,ro /system"
adb shell su -c "mount -o ro,remount /dev/block/mmcblk0p1 /system"
adb reboot
adb wait-for-device
The question is how to get access to ADB. If you boot your device normally then I guess it will be too late. Kindle OS will proceed with the update. Perhaps, you can get into recovery (if you have it) and run these commands.
Anyway, it is better if you hear a second opinion from somebody more experienced.

thanks for that, i found that script when i was browsing earlier in a sh script, and was going to ask if it worked until i noticed that the script was linked back to the xda forums, wish i had sen it before my kindle started updating, and i don't have a custom recovery installed, thats why i wanted to not install this update i had been waiting around for one to come out and i kinda forgot about it and never checked back to see that it was out. I hope someone can still help me out, or atleast tell me if i will just have to boot up and I'm assuming wait for a new root exploit, since i think they usually patch the previous one when they update. Hope to hear a reply soon because i hate reading manga on my ipod... its got a small screen compared to my kindle... (I NEED MY MANGA FIX xD) and yes i know i could read it on my pc bu ti cant lay in my bed while i do it... love the quickmanga app.

stunts513 said:
thanks for that, i found that script when i was browsing earlier in a sh script, and was going to ask if it worked until i noticed that the script was linked back to the xda forums, wish i had sen it before my kindle started updating, and i don't have a custom recovery installed, thats why i wanted to not install this update i had been waiting around for one to come out and i kinda forgot about it and never checked back to see that it was out. I hope someone can still help me out, or atleast tell me if i will just have to boot up and I'm assuming wait for a new root exploit, since i think they usually patch the previous one when they update. Hope to hear a reply soon because i hate reading manga on my ipod... its got a small screen compared to my kindle... (I NEED MY MANGA FIX xD) and yes i know i could read it on my pc bu ti cant lay in my bed while i do it... love the quickmanga app.
Click to expand...
Click to collapse
When kindle is updated to 7.3.0 you lose your root and some applications will stop working or get deleted. You can still re-root your Kindle 7.3.0 using exactly the same procedure as for 7.2.3. I just re-rooted my device yesterday. it worked without any problem. I had to reinstall Google Play and custom launcher after root.

ok well thanks, I guess I have no choice but to let it finish updating, well maybe unless they find a new bug to let us put custom recovery on it, that other project will get more attention, can't remember the name of it because I haven't been browsing around in the community much for atleast a month. Funny thing is I have to remember how I rooted my kindle... I left all my rooting utilities and scripts in a folder, but my mom has a kindle fire 1st gen that i rooted as well so the stuff is also in the folder, shouldn't be a problem though I'm a pc tech so i can sort this stuff out easily.

Unpossible ROOT please help!

Well I have Kindle Fire 7 at home and I wanted to install android on,so first I have to root it but I can not describe you how many times and solutions I have tried,Binary root,Qemu root, KF First Aide.So first two works like a charm and after "Root" is done I try to test it with ES file explorer and root is not applied.I really don't know what I can do more.
I am at version 11.3.2.5
What can I do?

duvnjak said:
Well I have Kindle Fire 7 at home and I wanted to install android on,so first I have to root it but I can not describe you how many times and solutions I have tried,Binary root,Qemu root, KF First Aide.So first two works like a charm and after "Root" is done I try to test it with ES file explorer and root is not applied.I really don't know what I can do more.
I am at version 11.3.2.5
What can I do?
Click to expand...
Click to collapse
My kindle is this model: kindle fire p48wvb4

duvnjak said:
My kindle is this model: kindle fire p48wvb4
Click to expand...
Click to collapse
BUMP Please help me

duvnjak said:
bump please help me
Click to expand...
Click to collapse
**** you everyone **** youuuuu!

mine just updated to 11.3.2.6 yesterday w/o my knowledge
ugh, I'll never get to root this guy

duvnjak said:
**** you everyone **** youuuuu!
Click to expand...
Click to collapse
No need to flame. We all saw your request.
Head over to kfsowi.com which will porbably redirect you to another site where you can find a rooting guide.

Root for "11.3.2.6_user_326002520"
It´s still possible to root 11.3.2.6 with KindleSuite with a small tweak:
1.) Get an actual version from KindleSuite: https://github.com/secretdevwork/KindleSuite/wiki
2.) Extract the archive and search in folder "/resources/tools" for the file "11325.bat" and make a backup of this file
3.) open "11325.bat" in a text editor
4.) search for the code line
Code:
adb shell chmod 755 /data/local/tmp/*
replace this line with the following code lines:
Code:
adb shell chmod 755 /data/local/tmp/su
adb shell chmod 755 /data/local/tmp/exploit
adb shell chmod 755 /data/local/tmp/rootme.sh
5.) save the edited file
6.) start KindleSuite, go to Root section and select the "11.3.2.5" entry (which leads to the edited Batch skript)
7.) start the rooting procedure as described by KindleSuite
8.) profit
This is just a small tweak to fix the chmod permission problems with the original script but I think KindleSuite will be updated in a few days.
P.S.: the KindleSuite root procedure does restore 11325-boot.img but nevermind it is binary the same as in the original 11.3.2.6_user_326002520 image included.

Calibaan said:
It´s still possible to root 11.3.2.6 with KindleSuite with a small tweak:
1.) Get an actual version from KindleSuite:
2.) Extract the archive and search in folder "/resources/tools" for the file "11325.bat" and make a backup of this file
3.) open "11325.bat" in a text editor
4.) search for the code line
Code:
adb shell chmod 755 /data/local/tmp/*
replace this line with the following code lines:
Code:
adb shell chmod 755 /data/local/tmp/su
adb shell chmod 755 /data/local/tmp/exploit
adb shell chmod 755 /data/local/tmp/rootme.sh
5.) save the edited file
6.) start KindleSuite, go to Root section and select the "11.3.2.5" entry (which leads to the edited Batch skript)
7.) start the rooting procedure as described by KindleSuite
8.) profit
This is just a small tweak to fix the chmod permission problems with the original script but I think KindleSuite will be updated in a few days.
P.S.: the KindleSuite root procedure does restore 11325-boot.img but nevermind it is binary the same as in the original 11.3.2.6_user_326002520 image included.
Click to expand...
Click to collapse
Just says waiting for device after i select 11.3.2.5

Of course you still need an ADB connection and a fastboot cable for rooting the 7" Kindle and according to the "Waiting for device..." ADB connection is not established.

Fire 7 9th gen rooting problem

So I'm trying to root my fire 7 9th gen (os ver 6.3.1.4)
And the problem is mtk-su says permission denied (sw method btw)
I'll literally follow every step correctly
And it will just say perrmission denied when I run ./mtk-su
If anyone can help me thanks in advance

Sonicfann said:
So I'm trying to root my fire 7 9th gen (os ver 6.3.1.4)
And the problem is mtk-su says permission denied (sw method btw)
I'll literally follow every step correctly
And it will just say perrmission denied when I run ./mtk-su
If anyone can help me thanks in advance
Click to expand...
Click to collapse
What directory on the kindle are you copying the mtk-su file to?
The ADB shell has the necessary access in some folders only, so the target folder matters.
/data/local/tmp worked fine for me.
For me the following worked:
(Computer) adb push mtk-su /data/local/tmp
(Computer) adb shell
(ADB shell) cd /data/local/tmp
(ADB shell) chmod 755 mtk-su
(ADB shell) ./mtk-su
I did do this on os 6.3.1.2 though. If this does not work on 6.3.1.4 anymore, you might want to downgrade to 6.3.1.2 via ADB sideload first.

Sonicfann said:
So I'm trying to root my fire 7 9th gen (os ver 6.3.1.4)
And the problem is mtk-su says permission denied (sw method btw)
I'll literally follow every step correctly
And it will just say perrmission denied when I run ./mtk-su
If anyone can help me thanks in advance
Click to expand...
Click to collapse
You can use hardware method instead: https://forum.xda-developers.com/am...ire-7-2019-mustang-unbrick-downgrade-t3944365
Follow the steps carefully.

porter.mb said:
What directory on the kindle are you copying the mtk-su file to?
The ADB shell has the necessary access in some folders only, so the target folder matters.
/data/local/tmp worked fine for me.
For me the following worked:
(Computer) adb push mtk-su /data/local/tmp
(Computer) adb shell
(ADB shell) cd /data/local/tmp
(ADB shell) chmod 755 mtk-su
(ADB shell) ./mtk-su
I did do this on os 6.3.1.2 though. If this does not work on 6.3.1.4 anymore, you might want to downgrade to 6.3.1.2 via ADB sideload first.
Click to expand...
Click to collapse
So how do I adb sideload? I can't find it in stock recovery

Sonicfann said:
So how do I adb sideload? I can't find it in stock recovery
Click to expand...
Click to collapse
I dont believe Downgrading is an option. You need to do the hardware method to unlock. ADB sideload has been removed from stock recovery. Downgrading involves brick risk also. This thread should have most of the answers you seek.
https://forum.xda-developers.com/am...ire-7-2019-mustang-unbrick-downgrade-t3944365

Sonicfann said:
So I'm trying to root my fire 7 9th gen (os ver 6.3.1.4)
And the problem is mtk-su says permission denied (sw method btw)
I'll literally follow every step correctly
And it will just say perrmission denied when I run ./mtk-su
If anyone can help me thanks in advance
Click to expand...
Click to collapse
Did you ever get it figured out? I just got one and its a TOTAL paperweight with Amazons trash layer

Sonicfann said:
So how do I adb sideload? I can't find it in stock recovery
Click to expand...
Click to collapse
trying to root my fire 6.3.1.2 to lineage 14.1 man alittle lost install linux from my thumb drive to a partion on my main hd boot up linux not sure where to put all the files on hd at this point anyone help