HTC Hero (Sprint) CDMA - Help need! No power - Hero CDMA Q&A, Help & Troubleshooting

Hello dear all,
Yesterday i installed CyanogenMod 7.2 on my HTC Hero (Sprint) CDMA. - It was awesome and worked great!
and today, i wanted to update my radio. I just found it from my folder. (It was downloaded some days ago)
I copied the file (update-hero-radio-63.18.55.06JU_6.35.09.26-signed) to SD card root and reboted my phone with recovery.
Installed from sd card and it just stucked while updating radio.
So i waited so long and nothing happens.
Then i put my battery out and inserted it.
Tried to power on the device but NO POWER ON. Even no power on LED when it connected to charger.
I just want to mention that IT WONT WORK IF I PRESS (VOL DOWN + POWER/ HOME + POWER/ MENU + POWER/ VOL DOWN + GREEN + POWER )
When i press Power button + VOL UP, it vibrates 3 times
What can i do to get my phone back to normal?
Please help me.
Thank you.
Kasun Jayarathna

truekasun said:
Hello dear all,
Yesterday i installed CyanogenMod 7.2 on my HTC Hero (Sprint) CDMA. - It was awesome and worked great!
and today, i wanted to update my radio. I just found it from my folder. (It was downloaded some days ago)
I copied the file (update-hero-radio-63.18.55.06JU_6.35.09.26-signed) to SD card root and reboted my phone with recovery.
Installed from sd card and it just stucked while updating radio.
So i waited so long and nothing happens.
Then i put my battery out and inserted it.
Tried to power on the device but NO POWER ON. Even no power on LED when it connected to charger.
When i press Power button + VOL UP, it vibrates 3 times
What can i do to get my phone back to normal?
Please help me.
Thank you.
Kasun Jayarathna
Click to expand...
Click to collapse
Hold volume button down and then press power button. This should load fastboot and allow you to either install stock image if loaded on sdcard or get into recovery menu.
Hope this helps.

jamstewonline said:
Hold volume button down and then press power button. This should load fastboot and allow you to either install stock image if loaded on sdcard or get into recovery menu.
Hope this helps.
Click to expand...
Click to collapse
No buddy, FAST BOOT or HBOOT doesn't start.. even no vibration or power up.

truekasun said:
Hello dear all,
Yesterday i installed CyanogenMod 7.2 on my HTC Hero (Sprint) CDMA. - It was awesome and worked great!
and today, i wanted to update my radio. I just found it from my folder. (It was downloaded some days ago)
I copied the file (update-hero-radio-63.18.55.06JU_6.35.09.26-signed) to SD card root and reboted my phone with recovery.
Installed from sd card and it just stucked while updating radio.
So i waited so long and nothing happens.
Then i put my battery out and inserted it.
Tried to power on the device but NO POWER ON. Even no power on LED when it connected to charger.
I just want to mention that IT WONT WORK IF I PRESS (VOL DOWN + POWER/ HOME + POWER/ MENU + POWER/ VOL DOWN + GREEN + POWER )
When i press Power button + VOL UP, it vibrates 3 times
What can i do to get my phone back to normal?
Please help me.
Thank you.
Kasun Jayarathna
Click to expand...
Click to collapse
Looks like you flashed a "hero," not a "heroc" radio? They always say the only way to really brick your hero is to mess up flashing a radio :/
Sent from my SCH-I535 using xda app-developers app

ajrty33 said:
Looks like you flashed a "hero," not a "heroc" radio? They always say the only way to really brick your hero is to mess up flashing a radio :/
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Is there any way to re-flash this?

Unfortunately not, without hand flashing equipment and a bit of engineering knowledge your phone is a brick. There is no way to recover it.
Sent from my cm_tenderloin using xda app-developers app

Shelnutt2 said:
Unfortunately not, without hand flashing equipment and a bit of engineering knowledge your phone is a brick. There is no way to recover it.
Sent from my cm_tenderloin using xda app-developers app
Click to expand...
Click to collapse
What do i need to fix this?
Let me know about it please.
Thank you.

Related

Help, choose wrong phone for ROM Manger and now stuck in Android Recovery Mode

Help guys.
I have a Samsung Galaxy S Captivate I897. Last night I installed the Clockworkmod ROM Manager in there and was messing around with it.
I choose my phone model to be the the I9000 and then I went into recovery mode to restore the previous ROM, but guess what? It went into recovery mode, the volume up and down buttons select the menu items and it asks me to hit the "OK key" to enter.
The Captivate doesn't have an OK key, it uses the power button. So the Android Recovery Mode here thinks the phone is a I9000 and I can't get it to do anything other than reboot into that mode.
I've tried using the ADB to try to get back into download mode but it's no longer reading the phone. The volume + power buttons to go into that mode has never worked for this phone either.
I'm at a loss at what to do. Is there anyway I can get out of recovery mode and into download mode or back to regular phone usage here? Would I need to take it to an android developer?
Thanks for your help.
Thanks for your help.
vancouverguy said:
Help guys.
I have a Samsung Galaxy S Captivate I897. Last night I installed the Clockworkmod ROM Manager in there and was messing around with it.
I choose my phone model to be the the I9000 and then I went into recovery mode to restore the previous ROM, but guess what? It went into recovery mode, the volume up and down buttons select the menu items and it asks me to hit the "OK key" to enter.
The Captivate doesn't have an OK key, it uses the power button. So the Android Recovery Mode here thinks the phone is a I9000 and I can't get it to do anything other than reboot into that mode.
I've tried using the ADB to try to get back into download mode but it's no longer reading the phone. The volume + power buttons to go into that mode has never worked for this phone either.
I'm at a loss at what to do. Is there anyway I can get out of recovery mode and into download mode or back to regular phone usage here? Would I need to take it to an android developer?
Thanks for your help.
Thanks for your help.
Click to expand...
Click to collapse
Shut off the phone, open up odin(DG's flash to stock one) hold the power and the menu button. Once you see the ATT screen release the power while continuing to hold the volume buttons. Once odin recognizes your device flash to stock using the utility. Once this works donate to DG for saving your ass. Also, quit using ROM manager. Just use the update.zip method everyone else uses.
+1 for just using CWM update.zip It is sooo much easier/faster.
Thanks, but it didn't work. My Galaxy S is one of those where the volume + power buttons don't work to get it into download mode.
I did try power + menu as you suggest, but that doesn't work either.
try this
1. open odin.
2. With phone unplugged remove battery
3. with battery removed plug phone into pc via USB
4. with battery still removed simultaneously hold down Vol. + / - (forget about power button just hold down the two vol buttons)
5. While holding down the vol + / - insert the battery (keep the vol buttons down and hopefully DL screen comes up)
silverslotcar said:
+1 for just using CWM update.zip It is sooo much easier/faster.
Click to expand...
Click to collapse
I cannot stress this enough.
Also, OP, if the above doesn't work, it might be USB jig time.
pwr isn't used to go into dload mode - that would turn your phone on.
Do this:
Open odin
Remove bat, sim, ext mem card
replace bat
hold vol -/+ and plug in data cable to computer
(should be download mode)
If that fails, then get yourself a jig... gotta search for the thread though - should cost a couple dollars. Then once you're back up... look up the thread to fix the 3 button combo.
You might try turning the phone off then hold VOLUME DOWN and POWER (not vol up/dwn/pwr) to get into download mode. Make sure to remove the sim and sd cards.
I bricked my phone over the weekend and had similar problem you did.the easiest way too get out in to download mode is a jig. Its easy and cheap to do.look on you tube under un brick captivate fort a tutorial.
Sent from my SAMSUNG-SGH-I897 using XDA App
Question about using update.zip to install clockwork recovery after flashing to stock (and avoiding Rom Manager):
Is rooting still required?
doreyu said:
Question about using update.zip to install clockwork recovery after flashing to stock (and avoiding Rom Manager):
Is rooting still required?
Click to expand...
Click to collapse
Nope. No root needed
mcord11758 said:
Nope. No root needed
Click to expand...
Click to collapse
Awesome, great that would be hugely faster, thanks.
doreyu said:
Awesome, great that would be hugely faster, thanks.
Click to expand...
Click to collapse
Once you learn that trick you are on stock for like 2 minutes before you flash
Yeah I'm kind of a lurk but I've been around for about a month just flashing everything, and I had no idea it could be done like this till today. Going to make my next one even faster.
Sent from my SAMSUNG-SGH-I897 using XDA App
Nothing seems to work.
I'm going to try the jig method Wednesday morning. Wish me luck!
I tried the jig and it didn't work.
What happened was that it got me back into recovery mode, not download mode. Tried it several times. So unless I'm hitting the wrong points on the phone usb plugin (other than the last two), I'm hooped.
I tried the direct resistor wire to points in usb plugin method. I didn't try the one where I cut open a mini-usb cable and use the plug as a dongle, although I think it may get the same result.
What do you guys think?

Clockworkmod Recovery Combo

Is there any combo to get in recovery after power on phone?
I remember that in Zero 2.3.4 (but im not sure), is G button + power button, but it isnt work in CM 10
Thank you.
bollix said:
Is there any combo to get in recovery after power on phone?
I remember that in Zero 2.3.4 (but im not sure), is G button + power button, but it isnt work in CM 10
Thank you.
Click to expand...
Click to collapse
Power your phone off, push and hold volume down, then hold power button as well and hold it for a few seconds. Then you ll reboot to recovery or simply boot the phone, hold the power button, choose reboot, in the next menu choose boot recovery and done.
Sent from my LG-P970 using xda app-developers app
Doesnt work for me, i need combo to get recovery without booting my system, because my CM10.1 is broken and wont boot..
try to connect to an usb cable
felipelluna said:
try to connect to an usb cable
Click to expand...
Click to collapse
doesnt work.
simple use SFT.
there is PBR (iirc, pseudo-boot recovery, button combo to enter recovery, cmiiw) on cm10. I think cm10.1 also has it.
turn on the phone, focus on led button, when it start blink for the first time press volume down + power button. You should press it at the right time to make it work. Tried it couples of time.
thank you, it works!
bollix said:
thank you, it works!
Click to expand...
Click to collapse
iI just saw that it work onjy on GB roms and cm10 cm10.1
I guess it is about bootloader, I don't know exactly!
I tried it on STOCK ICS 4.0.4 (Nemesis) and it dind't work for me.

Galaxy S Plus no recovery mode

Hi!
I've just upgraded my Galaxy S Plus to the official 2.3.6 Gingerbread. Everything seems ok, maybe a bit slow though, I'd like to do a master reset but I can't be able to access the Recovery mode by pressing Volume Up and Power, Nothing happens. It just starts up normally.
I can't find anything regarding this matter.
Hopefully someone can help me.
Thanks :cyclops:
Odp: Galaxy S Plus no recovery mode
The correct combination to activate the recovery is VolUp+Home+Power.
Sent from my GT-I9000 using xda app-developers app
Have you rooted the device?
You need to do this to get recovery - CWM
AndroidCi said:
The correct combination to activate the recovery is VolUp+Home+Power.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
no, on sgs+ the correct combination is volume up + power
catwalka said:
Hi!
I've just upgraded my Galaxy S Plus to the official 2.3.6 Gingerbread. Everything seems ok, maybe a bit slow though, I'd like to do a master reset but I can't be able to access the Recovery mode by pressing Volume Up and Power, Nothing happens. It just starts up normally.
I can't find anything regarding this matter.
Hopefully someone can help me.
Thanks :cyclops:
Click to expand...
Click to collapse
press volume up + power until you see samsung logo, wait a couple of seconds then release power and then volume up. you should see an android out of the box, press menu. you shuld be in recovery now. you don't need root to do this, and you can root your sgs+ from stock recovery (i have an sgs+)
it worked
ktulu84 said:
no, on sgs+ the correct combination is volume up + power
press volume up + power until you see samsung logo, wait a couple of seconds then release power and then volume up. you should see an android out of the box, press menu. you shuld be in recovery now. you don't need root to do this, and you can root your sgs+ from stock recovery (i have an sgs+)
Click to expand...
Click to collapse
it worked, after the logo appears (android out of the box) press the menu button not home button
thank you..

[Q] I think I bricked my phone :( :( - PLEASE help!

Hi,
I tried the regular fastboot method to load CWM recovery.
Whenever it got to the point of loading the recovering, it would just say "flashing recovery on the device...".
Then, when restarting bootloader and clicking on "recovery", it would just shut down the phone.
I decided to experiment to try fix the issue, and I came across this post:
http://forum.xda-developers.com/showthread.php?t=1928551
I downloaded the ZIP file and I ran the root.bat
It flashed some boot images and now my phone wont start
It is stuck on the "warning bootloader unlocked screen" and will not go any further.
Please help . I'm so scared that I've bricked my phone. Is there ANYTHING I can do?
Thanks in advance for the help!
The methods u used can't brick your phone
Reboot in boot loader by pressing the power button and volume - button at the same time. Just at the moment the phone shuts-down/reboot release the power button. It will boot in boot loader. After this flash cwm or twrp again and with the volume down button go to recovery. Select recovery with the volume up key and u are done. Cwm/twrp is flashed and will boot in the recovery.
In recovery I would install the ROM from Omar. It will restore your system and boot.IMG so it will work. Don't forget to wipe data.
If this doesn't work flash the home made fast boot files somewhere in the development section
Sent from my XT890 using xda app-developers app
Hazou said:
The methods u used can't brick your phone
Reboot in boot loader by pressing the power button and volume - button at the same time. Just at the moment the phone shuts-down/reboot release the power button. It will boot in boot loader.
Click to expand...
Click to collapse
Thanks - I tried that. I do let go of the buttons as soon as it starts to reboot itself, but it doesn't start the bootloader - it still just shows the screen "warning bootloader unlocked". I can not get back into the bootloader
Do u reset the phone with the 4 buttons and just when it resets does your phone reboots immediately?
Sent from my GT-P5110 using XDA Premium HD app
Hazou said:
Do u reset the phone with the 4 buttons and just when it resets does your phone reboots immediately?
Sent from my GT-P5110 using XDA Premium HD app
Click to expand...
Click to collapse
If I hold all 4 buttons, the screen goes blank, and the green light stays on. My PC then finds hardware called "MEDFIELD" but wont find drivers for it.
Does this help at all?
alkit said:
If I hold all 4 buttons, the screen goes blank, and the green light stays on. My PC then finds hardware called "MEDFIELD" but wont find drivers for it.
Does this help at all?
Click to expand...
Click to collapse
The above applies when connected with usb.
If I press all 4 buttons without USB connected, it just reboots and gets stuck on the "unlocked bootloader" message again
alkit said:
Then, when restarting bootloader and clicking on "recovery", it would just shut down the phone.
Click to expand...
Click to collapse
Just of curiosity - which button you used to select recovery - power button or vol.up button?
alkit said:
I do let go of the buttons as soon as it starts to reboot itself, but it doesn't start the bootloader
Click to expand...
Click to collapse
You should let go only of power button and hold vol.down button (at least for me)
If your PC finds hardware - can you do fastboot devices to check whether it is actually recognized properly?
And last thing - which method you used to load recovery (and were you on ICS\JB)? You were rooted and used automated methods or you unlocked bootloader and wanted to root afterwards (manually through fastboot)?
Divina Angelus said:
Just of curiosity - which button you used to select recovery - power button or vol.up button?
You should let go only of power button and hold vol.down button (at least for me)
If your PC finds hardware - can you do fastboot devices to check whether it is actually recognized properly?
And last thing - which method you used to load recovery (and were you on ICS\JB)? You were rooted and used automated methods or you unlocked bootloader and wanted to root afterwards (manually through fastboot)?
Click to expand...
Click to collapse
You are a GENIUS!!! A LIFE SAVER!!! I can't begin to tell you how grateful I am. BOTH of your points fixed the phone.
I could never get into recovery becuase I was pressing the power button. I could never get into fastboot becuase I was holding both the power and volume down button.
So, for anyone using a RAZR I... please note the following SIMPLE things:
1) In the bootloader menu, the power button does NOT select the option. The VOL UP button selects the option
2) To boot into BOOTLOADER : Hold both power and vol down buttons until the phone restarts, and then RELEASE the power button, while still HOLDING the volume down button! It will then load the bootloader.
Again, THANKS so so much for reviving my phone for me. I was going crazy without a phone!
alkit said:
You are a GENIUS!!! A LIFE SAVER!!! I can't begin to tell you how grateful I am. BOTH of your points fixed the phone.
I could never get into recovery becuase I was pressing the power button. I could never get into fastboot becuase I was holding both the power and volume down button.
So, for anyone using a RAZR I... please note the following SIMPLE things:
1) In the fastboot menu, the power button does NOT select the option. The VOL UP button selects the option
2) To boot into BOOTLOADER : Hold both power and vol down buttons until the phone restarts, and then RELEASE the power button, while still holding the volume down button! It will then load the bootloader.
Again, THANKS so so much for reviving my phone for me. I was going crazy without a phone!
Click to expand...
Click to collapse
I was going through everything you've faced yesterday. So yeah, glad I was of help to someone else as well)
This has never happened to me before but don't stress one bit because nothing ever permanently bad comes from this. You can forget about it being destroyed. These aren't iPhones, haha. You can get it going again pretty easy I hear. Just don't stress because there is no point and you WILL get help. Just listen to what these experienced dudes are saying and you should be back on track. Good luck!
- - - - - - - - - -
UPDATE: Nice! Glad to see you got the help you needed and everything's back on track!
Nice that it is solved. I gave u the solution on my first post, but nice that someone els did a better job in explaining it
There is almost no possibilities to brick your device if u only flash things like the boot, system, recovery or data partition. They can he solved very easy. If u flash the other partitions like the radio u can get a problem.
Sent from my XT890 using xda app-developers app
Hazou said:
Nice that it is solved. I gave u the solution on my first post, but nice that someone els did a better job in explaining it
There is almost no possibilities to brick your device if u only flash things like the boot, system, recovery or data partition. They can he solved very easy. If u flash the other partitions like the radio u can get a problem.
Sent from my XT890 using xda app-developers app
Click to expand...
Click to collapse
You are 100% right. I just re-read your post, and noticed that you did mention those 2 points. I must've just read over them really quickly and didn't pay attention to the details of which buttons to press. :angel:
Thanks a ton for your help! Really appreciate it! :highfive:

[Q] Booted with No OS. Can't Power off. Help Please

I installed clockwork mod recovery on my phone. Had a ROM to install, however the ROM installer package wasn't working properly. I mistakenly restarted my phone after having formatted my phone to install the ROM. So now the phone has started up to the white HTC screen and will not go any further. I cannot get it to restart into recovery or to simply power down. Do I need to just let the battery die and then restart into recovery or is there a hardware way to get it to restart without tearing the phone apart? Thanks!
Maybe try power plus volume up?
Sent from my 831C using XDA Premium 4 mobile app
JTmoney56 said:
I installed clockwork mod recovery on my phone. Had a ROM to install, however the ROM installer package wasn't working properly. I mistakenly restarted my phone after having formatted my phone to install the ROM. So now the phone has started up to the white HTC screen and will not go any further. I cannot get it to restart into recovery or to simply power down. Do I need to just let the battery die and then restart into recovery or is there a hardware way to get it to restart without tearing the phone apart? Thanks!
Click to expand...
Click to collapse
Just holding the power button for 10 seconds or so. It should power off. It is essentially the same thing as pulling the battery (on phone where you can do that).
fgr said:
Just holding the power button for 10 seconds or so. It should power off. It is essentially the same thing as pulling the battery (on phone where you can do that).
Click to expand...
Click to collapse
Volume UP plus Power for 10 seconds worked to get it to power down. Then I was able to access recovery. Thank you

Categories

Resources