Database Develop

[MOD] Fix for hardware locked phones / cant access recovery without adb.

NOTICE 10/18/2010:
I just captured the JI6 OTA update files from one of my phones and found that T-mobile is
updating the SBL with the same file found in this thread, I'm using the same method as T-mobile
to install the new SBL so the chances for a brick are the same but if you are completely
stock just wait for the OTA update and have the phone swapped under warranty in the
event of a brick.
WARNING:
INSTALLING THIS CAN BRICK YOUR PHONE
this is safer than the odin method, but when messing with the phones bootloader
there is always a chance that you could end up with a paper weight (I bricked
one phone messing with this stuff).
Updated 10-15-2010
this is the fix for hardware locked phones in update.zip form
install the phone drivers which can be found at:
http://forum.xda-developers.com/showthread.php?t=728929
put update.zip on the internal sd card (the 12 gb one)
turn on USB debugging in Settings-->Applications-->Development
reboot into recovery, use the RebootRecovery.bat in adb.zip if you dont know
how to do that.
when in recovery use the vol up and down buttons to navigate and power button to
select reinstall packages
install will take about 20-30 seconds and will pause at "writing secondary bootlader" don't panic
the phone will reboot you should be unlocked (or bricked).
update.zip md5=3b32fab99049530d2185014340840a47

I can vouch for this. It worked exactly as described.
Thanks!

Just to make sure after I do this I can flash any rom through odin without problem?

bobby915 said:
Just to make sure after I do this I can flash any rom through odin without problem?
Click to expand...
Click to collapse
I have flashed JFD, JI6, JI6 unofficial, JI6 OTA after flashing this and have had
no problem's
in general these files are written to parts of the phone that are usually never
written again after manufacturing and are responsible for getting the hardware
ready to load the kernel and then loading the kernel and booting the phone and
should not have any issues loading any ROM you care to flash.

Right now I can access download mode intermittently (maybe 1/10 times) by holding vol-up-down + power with usb plugged in. I cannot access recovery mode at all. Will this flash ruin my ability to access download mode? I feel like download mode is more important than recovery in case of a brick, but I would like the ability to go to recovery without adb or rom manager.

I've tried this 5 times, ODIN says failed everytime,EDIT Apparently 3rd times the 3rd time is the charm cause the 9th time it worked, Second Edit, The 9th time it started but its been 10 minutes so I assume it froze, Dammit.

Persanity said:
I've tried this 5 times, ODIN says failed everytime, Apparently 3rd times the 3rd time is the charm cause the 9th time it worked
Click to expand...
Click to collapse
So your recovery works now? Can you also get into download mode?

I'll add my Vibrant to the list of previously hardware locked phones, fixed by this.
I'd like to send out a HUGE thanks. Recovery and Download mode work every single time now. I can start playing around with roms safely.
Thank you so much

STEP BY STEP GUIDE
**UPDATE**10/14/10
STOCK RECOVERY VERSION OF HWLOCK FIX
untermensch has created a UPDATE.ZIP version of the fix
1) Download UPDATE.ZIP from OP or here http://www.megaupload.com/?d=2R2XOZ0X
2) Place UPDATE.ZIP in root of /sdcard not /sd
(If you have a previous UPDATE.ZIP file in root of /sdcard move it to another folder untill you have unlocked)
3) Use ADB to get into recovery
(use step posted below if you dont know how to use ADB)
(use command "adb reboot recovery")
4) Use vol down to navigate to reinstall packages press power to select
ODIN VERSION OF HWLOCK FIX
**NEW**
untermensch test file
(download from OP)
Everything you need minus drivers(or download individually in steps below)
http://www.megaupload.com/?d=66SSG9VR
step 1) go here and get the drivers and install them
http://forum.xda-developers.com/showthread.php?t=728929
step 2) download this zip file
http://forum.xda-developers.com/attachment.php?attachmentid=415810&d=1286579010
(load tar file from this zip in PDA section of odin after step 4)
step 3) go here download and follow guide to setup adb
http://forum.xda-developers.com/showthread.php?t=502010
(use "adb reboot download" to get to download mode)
step 4) go here get odin v 1.3
http://forum.xda-developers.com/showthread.php?t=790026
(run odin load tar in PDA make sure com4 or similar pops up click start)
FOR THOSE WHO NEED ADB HELP
REBOOT TO DOWNLOAD MODE WITH ADB
*must have drivers installed*
1) download androidSDK from here http://developer.android.com/sdk/index.html
2) extract the folder to root of your harddrive and rename it something short like ADB
3) on phone go to settings , applications , development and click USB debugging
then plug your phone into the computer
4) open windows command prompt and type this (hit enter after each line)
cd c:\
cd ADB\ (or whatever you renamed the folder in step 2)
cd tools\
adb reboot download
5) flash tar with odin
Sent from my SGH-T959 using XDA App

No, It did not work, The 9th time it actually started instead of saying failed immediately, But after 20 minutes nothing had changed and then odin cr5ashed and now my phone is soft-bricked/bricked whatever it is. All I know is im ****ing pissed. Can somebody point me in the direction of a complete restore thread? EDIT: Yeah I finally got it, Thank god I have never had a problem getting into download mode, When I say got it I mean restoring my phone to work not getting recovery to work, If I flash J14 first then J16 am I gonna lose the ability to go into recovery mode if the J14 update does actualy let my phone go into recovery?

untermensch said:
The leaked JI4 firmware contained the files needed to get the our phones unlocked
attached is an odin flashable tar with sbl.bin, boot.bin when flashed your phone wont ignore
the vol up + vol down + power buttons and you will be able to access recovery.
if you haven't used odin before follow AgentFour20's instructions http://forum.xda-developers.com/showpost.php?p=8541107&postcount=35
note:
1. the port wont be com4 for everyone as long as odin shows a com port you should be fine.
2. you might not need adb this method worked on my locked phone http://www.youtube.com/watch?v=rqxearzXrVY
you can flash this over any ROM or firmware and will probably never have to flash it again because boot.bin, sbl.bin are rarely included in firmware.
as usual use caution when flashing your phone, I am not sure if you can get back into download mode if this flash fails, So flash at your own risk!
for more info check out the I9000 thread:
http://forum.xda-developers.com/showthread.php?t=785201
and the original thread:
http://forum.xda-developers.com/showthread.php?t=802763&page=3
Good Luck!
md5 for tar file = d18f9d23d3060260a4e7edc1b6321941
Click to expand...
Click to collapse
Gonna put in my vote for one recommendation for you people who have a dickens of a time getting into download mode and are afraid of Odin3 leaving you stranded.
Try using Odin3 v1.30 instead of Odin3 v1.00 (it's linked in the Bible thread). My failure rate on flashing with v1.30 so far is zero. My failure rate when I was flashing with v1.00 was more to the tune of 50% of the time. I'm not hardware locked, so this is less scary for me than it is for you.
Just a safety tip...Best of luck!

sounds like solution is simple, but why did this occur on some vibrants in the first place?

SamsungVibrant said:
sounds like solution is simple, but why did this occur on some vibrants in the first place?
Click to expand...
Click to collapse
My guess would be that there are different internal JFD firmware images floating around wherever Samsung manufactures these, and one had the bugtastic sbl. We've already seen in the case of JI6 (where there were actually two versions of this firmware, with the leaked version from Kies having a nearly week older build date) that Samsung isn't necessarily consistent with their versioning.
Just a guess though..

Awesome....used odin 1.3 and this took a few seconds and worked flawlessly
if you follow the instructions in the posts above, don't see how you can go wrong
I can now access download mode and recovery...and I can sleep a lot easier knowing that if something happens I can fix it now

Yes! Masterotaku thank you so much for posting about odin3 v1.3, 1st time it work for J14 over J16, I can now boot into download and recovery mode. Sweet.

masterotaku said:
My guess would be that there are different internal JFD firmware images floating around wherever Samsung manufactures these, and one had the bugtastic sbl. We've already seen in the case of JI6 (where there were actually two versions of this firmware, with the leaked version from Kies having a nearly week older build date) that Samsung isn't necessarily consistent with their versioning.
Just a guess though..
Click to expand...
Click to collapse
hmmm interesting, seems like samsung isn't consistent with their screen tints also. They need to get quality control under quality control

Wanted to add that this worked for me as well. Thanks for the info.

Worked on first try, Odin 1.3. Thank you so much for this fix! I knew holding out on replacing my vibrant would pay off =)
Now I got into recovery by both vol + power then release power, but how do you guys get into download mode? I used to be able to get there occasionally by doing that same key combo, but with usb attached.
EDIT: Wow that was easy.
RECOVERY MODE: Hold both volume buttons and power, once vibrant logo shows up, release power.
DOWNLOAD MODE: Hold both volume buttons (no power) and plug in USB. Instant!
EDIT: Honestly I can't thank you enough. This is so amazing!

Thanks so much, this really works, my 1st time ever using odin 1.3
and finally figure out what adb is. Before even pulling the battery would
not get me into download,and the only way to get into recovery was using
clockworkmod. This really works!!! thanks you thanks you.

Everything is not as good as it seems. I managed to flash the fix all right and now I have download mode. But my friend had done the same steps as myself but odin FAILED to flash the fix. It just said:
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
And his phone is totally bricked now.
It is really dangerous to use ODIN on hardware locked phones... Too high chance of failure to flash. ((

[HOW TO] Root / Install CWM Recovery On the Galaxy Tab 2 P31XX running 4.1.1 OTA

So you just finished following RGNDI's Guide on how to install JellyBean on your Gtab2 P31XX. Looks Nice right. But now you want to root it. That's what I'm here to help you do.
I've tested this Method Over and Over on the P3113 and it works every time with CWM Recovery 6. I'm pretty sure this will also work on the other 31XX variants
What You Need:
# Odin
# Samsung Kies
# CWM Recovery Image: 3113 | 3110 | 3100
# Gtab2 JB Rooter Zip
What To Do:
- Make sure Kies is Closed
- Copy the GTab2 JB Rooter Zip to your Tab
- Disconnect the Tab from your PC
- Restart your Tab in Download Mode (Power Off Tab then Hold Volume - & Power Button)
- Open Odin and UNCHECK "Auto Reboot" only
- Click the PDA button and find the CWM Tar file and select it (DO NOT HIT START YET)
- Plug in your Tab to the PC at which point the first "ID:COM" box should turn yellow and the Message windows should read "Added"
- Now, Hit Start
- When Completed the "ID:COM" Box should turn Green and right above it it should say "Pass"
- **Now the Following 3 Steps are Crucial, so read them carefully**
- Disconnect the Tab from your PC
- Hold down THE POWER BUTTON ONLY so the Tab will Turn Off
- Restart the Tab in Recovery Mode (Hold Volume + & Power Button), this should get you into CWM
(If you see Stock Recovery, you messed up, start again)
- In CWM, Select "Install Zip from SDCard" and find the Gtab2 JB Rooter zip file and install it
- Select "Go Back+++" and then "Reboot Device"
- At this Time, CWM will ask if you want to prevent the OS from Removing CMW, "SELECT YES"
- Thats it. When your Tab Starts up, you will have SuperSU installed, Open it, Update it, whatever you want.
You have just Succesfully Rooted and Installed CWM on your Gtab2
Special Thanks to the CWM Team for the Recovery Images and Thanks to Gecko225 over at Rootzwiki for the CWM Odin tars

cant get any of the links to work :crying:
EDIT: sorry my mistake!

I can't update a binary of superSU!!

yahn77 said:
I can't update a binary of superSU!!
Click to expand...
Click to collapse
whats the error you are getting?

Side Note:
Ketut made a real nice Odin Flashable CWM that gives you Root, and everything else all in one, so You can follow my instructions above, OR, just flahs his CWM here: http://forum.xda-developers.com/showthread.php?t=1880010

I have tried this 5 times and I can not get it to work. Odin says successful...but I keep getting stock recovery upon reboot.
What am i doing wrong?
EDIT: My bad I got it!

If you plug it into a charger prior to holding the power button for a hard reboot it will shut off and start to charge. Then you can unplug it wait for screen to go black. Then do your button combo. This will help with those of you fighting the recovery overwrite on boot. Gotta catch it on first try.

Is this working with OTA Update 2 for JB 4.1.1 ( leaked SAMMobile code )?
I have CWM Recovery 6.0.1.1 installed & it is working across device reboot.
JB rooter zip installs fine as well....but after reboot....when I run SuperSU from the menu....getting error:
"There is no SU binary instaled, and SuperSU cannot install it, This is a problem!"
What could this be?

thedeamon said:
Is this working with OTA Update 2 for JB 4.1.1 ( leaked SAMMobile code )?
I have CWM Recovery 6.0.1.1 installed & it is working across device reboot.
JB rooter zip installs fine as well....but after reboot....when I run SuperSU from the menu....getting error:
"There is no SU binary instaled, and SuperSU cannot install it, This is a problem!"
What could this be?
Click to expand...
Click to collapse
this worked because the normal zips to add root kept failing with the same error pre-OTA2, ill update the zip for OTA2

I updated the P3113UECLI4, and with odin flash P3113_SAMSUNG_RECOVERY_SUPERSU-0.96_BUSYBOX-1.20.2.tar.md5.zip. Now it doesent boot at all. Black screen, tried power button y volume up and nothing happens or power botton down nothing. I plug it a my pc, the logo of charging almost appear for 2 seconds and the goes off, appear the screen of charging once again for 2 seconds. Nothing its working for me. Any help??!!!

matusai said:
I updated the P3113UECLI4, and with odin flash P3113_SAMSUNG_RECOVERY_SUPERSU-0.96_BUSYBOX-1.20.2.tar.md5.zip. Now it doesent boot at all. Black screen, tried power button y volume up and nothing happens or power botton down nothing. I plug it a my pc, the logo of charging almost appear for 2 seconds and the goes off, appear the screen of charging once again for 2 seconds. Nothing its working for me. Any help??!!!
Click to expand...
Click to collapse
I didnt create the recovery, Ketut did so please ask him because he will probably know better
but I'll try to help you anyway....
connect the table, and from the command line type "adb devices" and see if its detected.
if it is, try "adb reboot download", which should put the tablet in download mode
try flashing regular CWM following the instructions in this thread.
come back and report what happens

Running 4.1.1 JB. Installed everything according to instructions. SuperSU appears in applications but gives an error when run. Tab has no root. Can anybody advise what went wrong?
If this doesn't work, I guess I'll have to fall back on 4.0.4 :crying:

why dont you all use ketut's single file method ? so simple. you get yellow triangle which goes away with CF 's TA

RomsWell said:
If you plug it into a charger prior to holding the power button for a hard reboot it will shut off and start to charge. Then you can unplug it wait for screen to go black. Then do your button combo. This will help with those of you fighting the recovery overwrite on boot. Gotta catch it on first try.
Click to expand...
Click to collapse
fun and games but i caught it 3rd time round
all seems well for now and just flashing tsunami v1 now

Worked Perfect Thank you!

I too kept getting the "There is no SU binary installed, and SuperSU cannot install it, This is a problem!" error message, so I had to use Ketut's guide here, which worked like a charm

windwaver said:
Running 4.1.1 JB. Installed everything according to instructions. SuperSU appears in applications but gives an error when run. Tab has no root. Can anybody advise what went wrong?
If this doesn't work, I guess I'll have to fall back on 4.0.4 :crying:
Click to expand...
Click to collapse
i have 4.1.2 fw form France and rooted with here http://forum.xda-developers.com/showthread.php?t=1933542
i think, it's gonna work too on 4.1.1
---------- Post added at 02:49 PM ---------- Previous post was at 02:27 PM ----------
windwaver said:
Running 4.1.1 JB. Installed everything according to instructions. SuperSU appears in applications but gives an error when run. Tab has no root. Can anybody advise what went wrong?
If this doesn't work, I guess I'll have to fall back on 4.0.4 :crying:
Click to expand...
Click to collapse
yamani_25 said:
i have 4.1.2 fw form France and rooted with here
i think, it's gonna work too on 4.1.1
Click to expand...
Click to collapse
Edit : here the link http://forum.xda-developers.com/showthread.php?t=1957160

Binary missing ?
Your method helped me install CWM on my Tab. Though when started SU, it said binary missing.
Tried single click method. Worked for me on OTA 4.1.1.

This worked for me... 4.1.1 ota, I had to uninstall old superuser app and flash ywice. I was lucky I did the ota rooted and had the sd sdcard scripted. So smooth and the ir does work
GT-P3113 - KFHD 8.9 - XT912

Worked perfect on the 4.1.1 update, did have to flash rooter zip twice and I fixed permissions for kicks and giggles. :good:

Bricked device

I'm a newbie here and doesn't followed correctly steps for install a theme, so it's completely my fault. Now, I need somebody to help me recovering my device.
I tried to install this theme http://forum.xda-developers.com/showthread.php?t=1808013
I read this thread http://forum.xda-developers.com/showthread.php?t=1551156 I've rooted the device and applied the instructions for "ClockWorkMod Recovery 5 - for use in future custons rom or partial back-up.-" but then, here is when I do wrong, I went to boot recovery mode (not CWM) > apply patch/update and selected the theme zip. Since then, every time I boot the device, it shows me 2 errors: the status bar process has stopped - And then the screen goes black and return again with the same error. At least it loads the background and icons of the main screen.
The device doesn't ask me for the password before the errors prompt. My device has the stock rom.
Can I fix it with recovery boot > wipe data/factory reset?

kalise said:
I'm a newbie here and doesn't followed correctly steps for install a theme, so it's completely my fault. Now, I need somebody to help me recovering my device.
I tried to install this theme http://forum.xda-developers.com/showthread.php?t=1808013
I read this thread http://forum.xda-developers.com/showthread.php?t=1551156 I've rooted the device and applied the instructions for "ClockWorkMod Recovery 5 - for use in future custons rom or partial back-up.-" but then, here is when I do wrong, I went to boot recovery mode (not CWM) > apply patch/update and selected the theme zip. Since then, every time I boot the device, it shows me 2 errors: the status bar process has stopped - And then the screen goes black and return again with the same error. At least it loads the background and icons of the main screen.
The device doesn't ask me for the password before the errors prompt.
Can I fix it?
Click to expand...
Click to collapse
Yeah from what you are describing you can 100% fix it. However if you didn't make a backup of any sort then you will need to reinstall your firmware with ODIN3 v3.07. Go to the same thread that you got ClockWorkMod Recovery from and download Odin from there. Then download the latest firmware for your country/region from here (you have to change the country to your own one in the drop down menu and sign up to download files which is free).
Make sure you download firmware for S5830i ONLY whatever you do! Wipe all user data in recovery just to avoid any further hiccups. Then put your phone in Download Mode (Power + VolUP + VolDown when switched off), connect it the PC and open Odin. Use the PDA section ONLY to put the tar.md5 firmware file in. DO NOT use a PIT file and do not tick any other options than the two default ones (Auto Reboot and FReset Time I think). Just follow that to the letter and once ODIN is done, it will almost definitely be back to normal again.
By the way also make sure you run Odin as administrator and that Kies is not running because they don't agree with each other.

I've downloaded the lastest firmware for my country (s8530i, Spain, November) and now Odin looks like this: i.imgur.com /rZ76d.png (no 10 posts yet, sorry)
I've got the device connected via USB and awaiting in odin mode "product name, custom bin, current bin, etc) "Downloading..." message. Should I use the entry "Wipe data/restore factory" from the recovery boot first?
Now, is everything ok, do I press start?

Very nearly but Odin hasn't recognised your phone yet. Basically you see where it says "ID:Com" with 8 grey boxes above the writing, well when Odin has made a connection with your phone one of those boxes should light up and something like COM:1-9 (number isn't important) will be displayed inside the box.
You probably need to install Samsung Kies (search for it on Google) which comes with the USB driver needed for Odin and then it should work. But as I said just make sure you actually kill/terminate Kies from Windows Task Manager before using Odin. If you've already installed Kies sometimes it's just being a pain in the backside, unplug the phone, pull the battery out, reinsert it, put the phone back in Download mode, reboot your PC, hopefully that should do it.
Everything else in your screenshot is absolutely fine. You don't have to Wipe Data before doing it, I usually do it because sometimes it can cause issues. In the worst case you might have to do it afterwards.

Sorry, my fault. The device wasn't plugged. Now it looks like this i.imgur.com /HJz3B.png
Done, device working, thank you very much and sorry for the trouble.

No trouble just press thanks button if I helped though please.

[RECOVERY][ROOT] Samsung Galaxy S4 Mini LTE (GT-I9195)

WARNING! ONLY USE THIS ON THE GT-I9195 MODEL!
Hello all S4 Mini owners!
I'm happy to finally release ClockworkMod recovery and an insecure kernel for the GT-I9195. With these two installed on your device, obtaining root is easy.
Attached to this post is the necessary files needed for this task. Download the following files:
Odin_v3.09.zip (if you don't have it already)
recovery-clockwork-6.0.5.1-serranoltexx.tar.zip
S4Mini_RootKit_v2.zip (contains SuperSU v1.89 and BusyBox v1.21.1) ONLY FOR STOCK ROM! NOT FOR CM OR OTHER AOSP BASED ROMS!
Extract recovery-clockwork-6.0.5.1-serranoltexx.tar.zip file to your computer.
The procedure is as:
Copy the " S4Mini_RootKit_v2.zip" to your device SD card.
Turn off the phone.
Press and hold home, volume down and power. Download screen should appear.
Connect USB cable, and press volume up.
Start Odin, uncheck "F. Reset Time", and then click AP button.
Select "recovery-clockwork-6.0.5.1-serranoltexx.tar.md5" file that you previously extracted, and press Start button. The phone will reboot when finished.
After the phone resets (it vibrates) IMMEDIATELY hold volume up and home buttons to boot into recovery mode.
Select the option to install the ZIP file you have previously copied to your device and begin flashing it.
After flashing using CWM, reboot into system and enjoy your rooted device.
Optional: Flash GT-I9195_Kernel_v1.zip (Only for Android 4.2.2, not KitKat) to use a custom stock kernel, which might fix battery drain for some.
Kernel changelog: https://github.com/arco/android_kernel_samsung_msm8930-common/commits/stock
If you get warnings about applications doing not permitted actions, delete the following files from system/app, or let SuperSU fix it for you.
KNOXAgent.apk
KNOXStore.apk
ContainerAgent.apk

arco68 said:
Hello all S4 Mini owners!
I'm happy to finally release ClockworkMod recovery and an insecure kernel for the GT-I9195. With these two installed on your device, obtaining root is easy.
Attached to this post is the necessary files needed for this task. Download and extract them into the same folder. The procedure is as follows:
Turn off the phone.
Press and hold home, volume down and power. Download screen should appear.
Connect USB cable, and press volume up.
Start Odin, uncheck "F. Reset Time", and then click PDA button.
Select "GT-I9195_MF5_870901_kernel.tar.md5" file, and press Start button. The phone will reboot when finished.
After boot is finished, power off your phone and repeat step 2 and 3.
In Odin, select "recovery-clockwork-6.0.3.3-serranoltexx.tar.md5", and press Start button.
After boot is finished, power off your phone.
Press and hold home, volume up and power. Phone will boot into recovery. When you exit recovery, it will ask if you want to root the device. Select yes.
All you need to do now, is to download the Superuser app from the Play Store, and you're set!
Click to expand...
Click to collapse
Worked a charm, many thanks

Arne, great work again!
[OFF-TOPIC] What do you think about releasing a second CM9/CM10 EOL for our old Galaxy W to include the MasterKey exploit patches? I don't think it's a good idea to leave us with security risks [/OFF-TOPIC]
Just continue doing great work, I wish you the best luck porting CM10.1 to the Galaxy S4 Mini!

arco68 said:
Hello all S4 Mini owners!
I'm happy to finally release ClockworkMod recovery and an insecure kernel for the GT-I9195. With these two installed on your device, obtaining root is easy.
Click to expand...
Click to collapse
Quick question before I root it, what do you mean by "insecure"? Certainly not shy, but as in unstable or as in unsafe?

charliebigpot said:
Quick question before I root it, what do you mean by "insecure"? Certainly not shy, but as in unstable or as in unsafe?
Click to expand...
Click to collapse
Insecure is needed for rooting, not unsafe or unstable. As far as I know, it removes some security-thingies added by Samsung. For normal use, this shouldn't make a difference.
Correct me if I'm wrong please

SGWUser said:
[OFF-TOPIC] What do you think about releasing a second CM9/CM10 EOL for our old Galaxy W to include the MasterKey exploit patches? I don't think it's a good idea to leave us with security risks [/OFF-TOPIC]
Click to expand...
Click to collapse
Yes, there will be new releases of that soon. But keep that discussion to the Galaxy W forums.
charliebigpot said:
Quick question before I root it, what do you mean by "insecure"? Certainly not shy, but as in unstable or as in unsafe?
Click to expand...
Click to collapse
An insecure kernel has disabled the root prevention checks that Samsung added. Other than that it's the same as stock kernel. Although in this kernel I also made two minor changes to allow apps to read the kernel log and the full logcat.

arco68 said:
Yes, there will be new releases of that soon. But keep that discussion to the Galaxy W forums.
An insecure kernel has disabled the root prevention checks that Samsung added. Other than that it's the same as stock kernel. Although in this kernel I also made two minor changes to allow apps to read the kernel log and the full logcat.
Click to expand...
Click to collapse
Great, thanks. One last noobie-like question - is this procedure going to delete what I have on the phone right now?

charliebigpot said:
Great, thanks. One last noobie-like question - is this procedure going to delete what I have on the phone right now?
Click to expand...
Click to collapse
No, all your stuff will still be there.

Thanks for the effort! I'm building a similar package for the I9192 (the dual sim variant, a.k.a "serranods") and I was wondering if you made any serious changes to the kernel except the usual ramdisk rooting changes (ro.secure, adbd binary, su binary etc.)
I'm going to release an insecured kernel based on the dual sim stock kernel, but I'm probably going to reuse the recovery. I expect the two platforms to be very similar in terms of recovery support (drivers, libraries, recovery kernel, partition layout etc.) and I know you can't make any implicit or explicit claims that the recovery won't brick any another model or variant than the one you made the release for. However, I expect no issues whatsoever as the hardware is identical except the modem, so I'll let you guys know.
Cheers,
C.

great staff arco!
ill give it a go when i have my mini within the next month.
i cant understand why dont xda do a sub section for s4 mini.....i dont even know which forum to look for s4 mini...

Yes, hats off! Good to hear your work is here goodluck with yer device Sir!
Sent from my GT-I9500 using Tapatalk 5.0.203 Alpha
1700Mhz A15 and 1500Mhz A7 running together with 640Mhz PowerVR SGX.

thanks alot. now the fun starts give me your link for sending you a beer.

Waiting patiently.
Sent from my GT-I9192 using xda premium

fenerbuuh said:
thanks alot. now the fun starts give me your link for sending you a beer.
Click to expand...
Click to collapse
Go to sir arco's profile. And you will see the link for paypal donation. Cheers
Sent from my CM10.1 Kernel 3.4 Wonder by arco using xda premium

arco68 said:
WARNING! ONLY USE THIS ON THE GT-I9195 MODEL!
Hello all S4 Mini owners!
I'm happy to finally release ClockworkMod recovery and an insecure kernel for the GT-I9195. With these two installed on your device, obtaining root is easy.
Attached to this post is the necessary files needed for this task. Download and extract them into the same folder. The procedure is as follows:
Turn off the phone.
Press and hold home, volume down and power. Download screen should appear.
Connect USB cable, and press volume up.
Start Odin, uncheck "F. Reset Time", and then click PDA button.
Select "GT-I9195_MF5_870901_kernel.tar.md5" file, and press Start button. The phone will reboot when finished.
After boot is finished, power off your phone and repeat step 2 and 3.
In Odin, click PDA button and select "recovery-clockwork-6.0.3.3-serranoltexx.tar.md5" file, and press Start button.
After boot is finished, power off your phone.
Press and hold home, volume up and power. Phone will boot into recovery. When you exit recovery, it will ask if you want to root the device. Select yes.
All you need to do now, is to download the Superuser app from the Play Store, and you're set!
Click to expand...
Click to collapse
I follow the first steps but I always get stuck at the beginning. I only get a screen with "downloading.... Do not turn off target!!" it does not matter what buttons I push. On top it says "odin mode" in red, some product info and then it says "Wrtie protection: Enable".
Any suggestions?

@charliebigpot: That's normal. When that screen appears, connect your device and start ODIN. Then, in ODIN, your device should be detected and you can start flashing. If you still need more info, please search the forum. In any event, you don't have a problem (yet)...
Cheers,
C.

Thank You for the hard work, it work perfectly for me.
I was able to restore my Angry Birds Stars wars Backup which is a life saver for me .
One little thing, I keep getting a notification that says :
"Device Information :
The device as detected an application attempting unpermitted actions. To protect your device, it is recommended you reboot."
So I hit reboot and it reboot in "recovery mode" instead of normal boot.
So I hit reboot in recovery mode and get back on the system, but the notification comes back a few minutes later.
Can somone help me fix that ?
Frem.
PS : The only actions I did after rooting is installing "supersuer" app, then using "ES file explorer" activate root access, to copy angry birds backup, then deactivate "ES file explorer" root access

dsixda's Android Kitchen files
THANKS MATE FOR GREAT JOB!
Now, if some1 can produce dsixda's Android Kitchen files for i9195, it would be awesome!
---------- Post added at 10:06 AM ---------- Previous post was at 09:38 AM ----------
frem said:
Thank You for the hard work, it work perfectly for me.
I was able to restore my Angry Birds Stars wars Backup which is a life saver for me .
One little thing, I keep getting a notification that says :
"Device Information :
The device as detected an application attempting unpermitted actions. To protect your device, it is recommended you reboot."
So I hit reboot and it reboot in "recovery mode" instead of normal boot.
So I hit reboot in recovery mode and get back on the system, but the notification comes back a few minutes later.
Can somone help me fix that ?
Frem.
PS : The only actions I did after rooting is installing "supersuer" app, then using "ES file explorer" activate root access, to copy angry birds backup, then deactivate "ES file explorer" root access
Click to expand...
Click to collapse
Delete KNOX apps (containing KNOX in their name), I think there are 3 of them, in system/apps, that would do it. You can use ES file explorer of course with root permissions

Delete KNOX apps (containing KNOX in their name), I think there are 3 of them, in system/apps, that would do it. You can use ES file explorer of course with root permissions
Click to expand...
Click to collapse
Thank you jba.33a that worked perfectly .
One last question a friend of mine told me that "rooting my phone" will stop it from getting the samsung "official updates".
Is that true ?
If it is true, is there a easy way around it like rooting it back ?
Thanks again for the hard work arco68.

Thank you arco68 works perfectly donation coming your way!
Sent from my GT-I9195

Samsung Galaxy S5 G901F 4G+ Rooting, installing custom recovery + adding custom ROM!

WELCOME TO SUPER GUIDE on how to root and add Custom Recovery for Samsung Galaxy S5 (SM-G901F 4G+ kccat6/kccat6xx) (ONLY FOR THIS MODEL)!
~Guide By me, KiprasLT
Credits:
To @Tkkg1994 for TWRP Custom Recovery,
To The well known and Mighty @Chainfire (If I missed someone, PM me!)
IF YOU FOLLOW MY STEPS BELOW, YOU WILL MAY LOSE YOUR WARRANTY, KNOX WILL DISPLAY 0x1! I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE!
BEFORE STARTING, make sure you have your sistem backup, if somethink goes wrong.
PLEASE, follow the instructions step-by-stop to make sure you succeed!
Now, let's get started:
1. Make sure you have USB Debugging enabled on your phone. You can easily enable it by going into --> Settings, scroll down, till you see "About phone" --> Scroll down till you see "create number". Tap it 7 times and you will enable developer settings. Now go back, scroll down again, and next to "About phone" you will see "Developer Options". Click on them. Make sure they are enabled by looking at top right corner and clicking white dot. Now go down till you see "USB Debugging" Press on it and click "OK" Check if it's enabled, then your phone is prepared.
2. Go ahead and download Odin3 latest (most recent) version into your computer. (Just google "Download Odin" or "Download Odin3".
3. Create a folder on your desktop and name it whatever you wish.
4. Download CF-Autoroot-kccat6-kccat6xx-smg901f.tar.md5 by clicking here and put it into the folder you just created, or just download it and put it into the folder. This is autoroot. It will root your device.
5. Download TWRP Custom Recovery by clicking here and put it into the folder you just created, or just download it and put it into the folder. This is Custom Recovery, it's the best one yet for SM-G901F. (Thank you once again Tkkg1994 for letting us use it and have it on our S5's)
6. Make sure your phone has at least 60% of battery remaining.
7. Power off the phone while holding power button and pressing "Power off" and "OK" and wait for it to turn off.
8. Get the phone into Download mode by pressing and holding Volume Down + Power + Home buttons at once. Wait for yellow think pop up with some text. Then press Volume UP to get into Download mode.
9. Plug your phone into PC with USB cabble. Then Open Odin. If it's not installed, just install it. Then wait for odin to recognise your phone (where it says ID:COM) that little box should turn into blue color. Go to options, make sure that ONLY autoreboot and F. Reset Time are market. Then, next to AP, mark it, and then click it. Select CF-Auto-Root-kccat6-kccat6xx-smg901f.tar.md5 and click "open". Wait for it to load up.
9.1 Hit the start button and watch the magic happen. You can take a look at your phone and see that blue think is charging up fast. Just let him do his thing. After the autoroot is applied, the phone will reboot itself. Remember that only first reboot after flashing somethink new will take longer. Stay calm and chill. Btw you can close odin for now.
10. Enter the pin code if the phone asks it, then turn on wifi. SuperSU message should pop up telling to install SuperSU. Do it (You need Wi-Fi). When the SuperSU is installed, your device should be rooted. (Don't freak out if SuperSU message didn't pop up, you can allways install it from Google Play store). You can go to google play store, download root checker, open it, click on "check root" or something similar, it will ask root acess, accept it. Then it's probably going to show that this device is properly rooted. Gratz! If not, you managed to screw up somewhere :crying:
Now, it's time for Custom recovery. It's much more better than standart recovery, and it will probably be needed in future.
Sooo, step 11. Get your phone into download mode once again (Power off, then Volume down+Power+Home) and then Volume up.
11.1 Connect your phone into your computer with USB cabble.
11.2 Open Odin/Odin3. Again, wait for it to recognise your phone, then click on "options", again, make sure that only Autoreboot and F. Reset Time are market. Then, next to AP, mark it, and then click it. Select g901f-cwm-recovery-6.0.5.1(1130).tar and press "open". Wait for it to load up.
11.3 Hit the start button and once again, watch the magic happen.
12. After succesfully flashing custom recovery, your phone should reboot by itself.
Guess what folks? This is it! You should have your SM-G901F G4+ rooted and have a custom recovery applied! CONGRATULATIONS to you! If you liked the guide, please hit "Thanks" button, it helps a lot And you can also rate this Threat! If you need any help, just post your question down here in the comment section.
Just a thing: I don't suggest installing Cyanogens (CM) Custom ROM. I've had so much trouble with CM 12, with removing it, fixing my phone and fixing google apps untill I totaly reseted it. However you are free to do what you want. If you found better ROM that's working for you and may work for others, be sure to share it right here in the comment section!
Edit: I found out that this guy @Tkkg1994 posted a good guide about how to install a ROM for this device! I tested it myself and it works perfectly! Currently testing other features, but It's the best one yet for SM-G901F G4+ kccat6/kccat6xx, you can check out the guide by clicking here!

Hi! I think in the title it should be "4G+" not "G4+" and thank you for your post!

vader20 said:
Hi! I think in the title it should be "4G+" not "G4+" and thank you for your post!
Click to expand...
Click to collapse
Oh yeah thanks for correcting it! And no problem m8!

Hi thanks for this guide!
I have just one question. I'm on Android 5.0.2, can I use the same CF auto-root file you used?
On chainfire's website there is only an auto-root file for 4.4.4.

KelvinPi said:
Hi thanks for this guide!
I have just one question. I'm on Android 5.0.2, can I use the same CF auto-root file you used?
On chainfire's website there is only an auto-root file for 4.4.4.
Click to expand...
Click to collapse
Hey, no problem dude! I have Android 5.0.2 too, I use it atm and it works 100% !

Hi KiprasLT, I tried to install and root my s5 g901F, using your method, but odin simply gives me a message that "all is succeeded, one failed". I've enabled usb debugging, my phone is simfree... I have installed android 5.0.2. Can you please tell me what em I doing wrong? I tried even twp recovery, and it's the same. I thought by rooting I will solve this "failed one" problem, but unfortunately, I didn't have any success.
Thanks in advance
KiprasLT said:
WELCOME TO SUPER GUIDE on how to root and add Custom Recovery for Samsung Galaxy S5 (SM-G901F 4G+ kccat6/kccat6xx) (ONLY FOR THIS MODEL)!
~Guide By me, KiprasLT
Credits:
To The well known Mighty @Chainfire ! (If I missed someone, PM me!)
IF YOU FOLLOW MY STEPS BELOW, YOU WILL MAY LOSE YOUR WARRANTY, KNOX WILL DISPLAY 0x1! I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE!
BEFORE STARTING, make sure you have your sistem backup, if somethink goes wrong.
PLEASE, follow the instructions step-by-stop to make sure you succeed!
Now, let's get started:
1. Make sure you have USB Debugging enabled on your phone. You can easily enable it by going into --> Settings, scroll down, till you see "About phone" --> Scroll down till you see "create number". Tap it 7 times and you will enable developer settings. Now go back, scroll down again, and next to "About phone" you will see "Developer Options". Click on them. Make sure they are enabled by looking at top right corner and clicking white dot. Now go down till you see "USB Debugging" Press on it and click "OK" Check if it's enabled, then your phone is prepared.
2. Go ahead and download Odin3 latest (most recent) version into your computer. (Just google "Download Odin" or "Download Odin3".
3. Create a folder on your desktop and name it whatever you wish.
4. Download CF-Autoroot-kccat6-kccat6xx-smg901f.tar.md5 by clicking here and put it into the folder you just created, or just download it and put it into the folder. This is autoroot. It will root your device.
5. Download g901f-cwm-custom-recovery-6.0.5.1(1130).tar by clicking here and put it into the folder you just created, or just download it and put it into the folder. This is custom recovery, it's the best one yet for SM-G901F.
6. Make sure your phone has at least 60% of battery remaining.
7. Power off the phone while holding power button and pressing "Power off" and "OK" and wait for it to turn off.
8. Get the phone into Download mode by pressing and holding Volume Down + Power + Home buttons at once. Wait for yellow think pop up with some text. Then press Volume UP to get into Download mode.
9. Plug your phone into PC with USB cabble. Then Open Odin. If it's not installed, just install it. Then wait for odin to recognise your phone (where it says ID:COM) that little box should turn into blue color. Go to options, make sure that ONLY autoreboot and F. Reset Time are market. Then, next to AP, mark it, and then click it. Select CF-Auto-Root-kccat6-kccat6xx-smg901f.tar.md5 and click "open". Wait for it to load up.
9.1 Hit the start button and watch the magic happen. You can take a look at your phone and see that blue think is charging up fast. Just let him do his thing. After the autoroot is applied, the phone will reboot itself. Remember that only first reboot after flashing somethink new will take longer. Stay calm and chill. Btw you can close odin for now.
10. Enter the pin code if the phone asks it, then turn on wifi. SuperSU message should pop up telling to install SuperSU. Do it (You need Wi-Fi). When the SuperSU is installed, your device should be rooted. (Don't freak out if SuperSU message didn't pop up, you can allways install it from Google Play store). You can go to google play store, download root checker, open it, click on "check root" or something similar, it will ask root acess, accept it. Then it's probably going to show that this device is properly rooted. Gratz! If not, you managed to screw up somewhere :crying:
Now, it's time for Custom recovery. It's much more better than standart recovery, and it will probably be needed in future.
Sooo, step 11. Get your phone into download mode once again (Power off, then Volume down+Power+Home) and then Volume up.
11.1 Connect your phone into your computer with USB cabble.
11.2 Open Odin/Odin3. Again, wait for it to recognise your phone, then click on "options", again, make sure that only Autoreboot and F. Reset Time are market. Then, next to AP, mark it, and then click it. Select g901f-cwm-recovery-6.0.5.1(1130).tar and press "open". Wait for it to load up.
11.3 Hit the start button and once again, watch the magic happen.
12. After succesfully flashing custom recovery, your phone should reboot by itself.
Guess what folks? This is it! You should have your SM-G901F G4+ rooted and have a custom recovery applied! CONGRATULATIONS to you! If you liked the guide, please hit "Thanks" button, it helps a lot And you can also rate this Threat! If you need any help, just post your question down here in the comment section.
Just a thing: I don't suggest installing Cyanogens (CM) Custom ROM. I've had so much trouble with CM 12, with removing it, fixing my phone and fixing google apps untill I totaly reseted it. However you are free to do what you want. If you found better ROM that's working for you and may work for others, be sure to share it right here in the comment section!
Edit: I found out that this guy @Tkkg1994 posted a good guide about how to install a ROM for this device! I tested it myself and it works perfectly! Currently testing other features, but It's the best one yet for SM-G901F G4+ kccat6/kccat6xx, you can check out the guide by clicking here!
Click to expand...
Click to collapse

galaxy-fun122 said:
Hi KiprasLT, I tried to install and root my s5 g901F, using your method, but odin simply gives me a message that "all is succeeded, one failed". I've enabled usb debugging, my phone is simfree... I have installed android 5.0.2. Can you please tell me what em I doing wrong? I tried even twp recovery, and it's the same. I thought by rooting I will solve this "failed one" problem, but unfortunately, I didn't have any success.
Thanks in advance
Click to expand...
Click to collapse
I think I had the same problem, I just made a backup of my files and then I flashed default firmware (official post + download link + guide here) and then on top of it flash CWM Custom recovery, then the phone should reboot, and then you can try to flash the CF-Autoroot again. Please reply back to me if it worked/didn't work.
P.S. Make sure that your phone is Samsung Galaxy S5 G901F 4G+. If it isn't, please reply.

Hi KiprasLT, I already have downloaded the default android(G901FXXU1BOC4_G901FNEE1BOC4_NEE). I checked, my device is SM-G901F Lte+. I don't know if it's the same as 4g or there are some differences, that's why I wrote this message. Please tell me, if it's the
same, or it changes everything.
Wish you all the best
GF
KiprasLT said:
WELCOME TO SUPER GUIDE on how to root and add Custom Recovery for Samsung Galaxy S5 (SM-G901F 4G+ kccat6/kccat6xx) (ONLY FOR THIS MODEL)!
~Guide By me, KiprasLT
Credits:
To The well known Mighty @Chainfire ! (If I missed someone, PM me!)
IF YOU FOLLOW MY STEPS BELOW, YOU WILL MAY LOSE YOUR WARRANTY, KNOX WILL DISPLAY 0x1! I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE!
BEFORE STARTING, make sure you have your sistem backup, if somethink goes wrong.
PLEASE, follow the instructions step-by-stop to make sure you succeed!
Now, let's get started:
1. Make sure you have USB Debugging enabled on your phone. You can easily enable it by going into --> Settings, scroll down, till you see "About phone" --> Scroll down till you see "create number". Tap it 7 times and you will enable developer settings. Now go back, scroll down again, and next to "About phone" you will see "Developer Options". Click on them. Make sure they are enabled by looking at top right corner and clicking white dot. Now go down till you see "USB Debugging" Press on it and click "OK" Check if it's enabled, then your phone is prepared.
2. Go ahead and download Odin3 latest (most recent) version into your computer. (Just google "Download Odin" or "Download Odin3".
3. Create a folder on your desktop and name it whatever you wish.
4. Download CF-Autoroot-kccat6-kccat6xx-smg901f.tar.md5 by clicking here and put it into the folder you just created, or just download it and put it into the folder. This is autoroot. It will root your device.
5. Download g901f-cwm-custom-recovery-6.0.5.1(1130).tar by clicking here and put it into the folder you just created, or just download it and put it into the folder. This is custom recovery, it's the best one yet for SM-G901F.
6. Make sure your phone has at least 60% of battery remaining.
7. Power off the phone while holding power button and pressing "Power off" and "OK" and wait for it to turn off.
8. Get the phone into Download mode by pressing and holding Volume Down + Power + Home buttons at once. Wait for yellow think pop up with some text. Then press Volume UP to get into Download mode.
9. Plug your phone into PC with USB cabble. Then Open Odin. If it's not installed, just install it. Then wait for odin to recognise your phone (where it says ID:COM) that little box should turn into blue color. Go to options, make sure that ONLY autoreboot and F. Reset Time are market. Then, next to AP, mark it, and then click it. Select CF-Auto-Root-kccat6-kccat6xx-smg901f.tar.md5 and click "open". Wait for it to load up.
9.1 Hit the start button and watch the magic happen. You can take a look at your phone and see that blue think is charging up fast. Just let him do his thing. After the autoroot is applied, the phone will reboot itself. Remember that only first reboot after flashing somethink new will take longer. Stay calm and chill. Btw you can close odin for now.
10. Enter the pin code if the phone asks it, then turn on wifi. SuperSU message should pop up telling to install SuperSU. Do it (You need Wi-Fi). When the SuperSU is installed, your device should be rooted. (Don't freak out if SuperSU message didn't pop up, you can allways install it from Google Play store). You can go to google play store, download root checker, open it, click on "check root" or something similar, it will ask root acess, accept it. Then it's probably going to show that this device is properly rooted. Gratz! If not, you managed to screw up somewhere :crying:
Now, it's time for Custom recovery. It's much more better than standart recovery, and it will probably be needed in future.
Sooo, step 11. Get your phone into download mode once again (Power off, then Volume down+Power+Home) and then Volume up.
11.1 Connect your phone into your computer with USB cabble.
11.2 Open Odin/Odin3. Again, wait for it to recognise your phone, then click on "options", again, make sure that only Autoreboot and F. Reset Time are market. Then, next to AP, mark it, and then click it. Select g901f-cwm-recovery-6.0.5.1(1130).tar and press "open". Wait for it to load up.
11.3 Hit the start button and once again, watch the magic happen.
12. After succesfully flashing custom recovery, your phone should reboot by itself.
Guess what folks? This is it! You should have your SM-G901F G4+ rooted and have a custom recovery applied! CONGRATULATIONS to you! If you liked the guide, please hit "Thanks" button, it helps a lot And you can also rate this Threat! If you need any help, just post your question down here in the comment section.
Just a thing: I don't suggest installing Cyanogens (CM) Custom ROM. I've had so much trouble with CM 12, with removing it, fixing my phone and fixing google apps untill I totaly reseted it. However you are free to do what you want. If you found better ROM that's working for you and may work for others, be sure to share it right here in the comment section!
Edit: I found out that this guy @Tkkg1994 posted a good guide about how to install a ROM for this device! I tested it myself and it works perfectly! Currently testing other features, but It's the best one yet for SM-G901F G4+ kccat6/kccat6xx, you can check out the guide by clicking here!
Click to expand...
Click to collapse

galaxy-fun122 said:
Hi KiprasLT, I already have downloaded the default android(G901FXXU1BOC4_G901FNEE1BOC4_NEE). I checked, my device is SM-G901F Lte+. I don't know if it's the same as 4g or there are some differences, that's why I wrote this message. Please tell me, if it's the
same, or it changes everything.
Wish you all the best
GF
Click to expand...
Click to collapse
It's a little bit different from the 4G+, but I'm not sure if it changes anythink. You might have to google it yourself or find another guide, becouse I myself don't own the lte+ nor I have any experiance with it.

Hi again. Somehow, I rooted, and installed cw. When I tryed to install the system, it passed, but I've got a bootloop. So I restored the factory firmware. Any suggestion? Thanks in advance.

galaxy-fun122 said:
Hi again. Somehow, I rooted, and installed cw. When I tryed to install the system, it passed, but I've got a bootloop. So I restored the factory firmware. Any suggestion? Thanks in advance.
Click to expand...
Click to collapse
Yeah I think the cw doesn't work for this phone model, so just stick whit what I've provided, it's working perfectly for me for about half a year and I'm not complaining. If you have any more questions, just reply to me.

galaxy-fun122 said:
Hi again. Somehow, I rooted, and installed cw. When I tryed to install the system, it passed, but I've got a bootloop. So I restored the factory firmware. Any suggestion? Thanks in advance.
Click to expand...
Click to collapse
use phills touch or twrp for g901f
and don,t forget to do full wipe before and factory reset after

I need root for g900v bok3 build

ricosf415 said:
I need root for g900v bok3 build
Click to expand...
Click to collapse
KiprasLT said:
WELCOME TO SUPER GUIDE on how to root and add Custom Recovery for Samsung Galaxy S5 (SM-G901F 4G+ kccat6/kccat6xx) (ONLY FOR THIS MODEL)!
Click to expand...
Click to collapse

I changed the DPI of my S5 Plus to 400 instead of the default 480. Some apps now appear in smaller boxes on the screen. For me the biggest problem is that the camera now has this problem.
In other threads people bring this up for the normal s5. The solution is to use Xposed to set custom Appsettings. But the problem is that Xposed doesn't work (yet) on the S5 plus! So is there any other way to fix the camera app?
Cheers!

wich recovery CM can i use when rooting after have the official rom marshmellow PHN netherlands
6.0.1 PDA G901FXXU1CPF6 CSC G901FPHN1CPF2 from http://www.sammobile.com/firmwares/database/SM-G901F ?

Problem solved. Good guide! Root and twrp working.
Sent from my SM-G901F using XDA-Developers mobile app

andreoide said:
Problem solved. Good guide! Root and twrp working.
Sent from my SM-G901F using XDA-Developers mobile app
Click to expand...
Click to collapse
TWRP 3.0.2????

Twrp
bodyzen said:
TWRP 3.0.2????
Click to expand...
Click to collapse
TWRP_3.0.2.0-kccat.tar
Added

andreoide said:
TWRP_3.0.2.0-kccat.tar
Added
Click to expand...
Click to collapse
Thanks!?