[Q] [ROM][JB]various questions - Galaxy Tab Q&A, Help & Troubleshooting

Hi!
I have decided to test JB on my Gtab P1000 (GSM) french model. It was running previously under CM9, thanks to the very good job of all the developpers!
I have installed CM10 by cdesai but I have some troubles with the UI: the icons are below the search bar and notification bar. I have search various option without luck. Furthermore, the unlock screen (I used schema) is duplicate with still the slide unlock screen which does not deactivate.
I have then test SAPIR which exhibit the same problems.
I precise I have restocked the GTab before applying new ROM o start from a clean tab.
Humberos ROM is the one which gives the best UI but there it is not very clear to me how various tablet options are working, with some unexpected "UI has stopped" when playing with "toggle status bar" from the system menu.
Is there somewhere some kind of "how-to" for UI configuration on JB?
I have to admit that there is so many info available that I'm lost in understanding various ROM differences...
Which ROM could be considered as the most "stable" and "stock"?
Thanks for your support!

Hi,
I'm running the latest HumberOs 20121021 rom and I have to say I have no problems at all with the tablet mode.
you just select it from the options and I works fine for me.
Another possibility is to reduce the DPI to something about 132-120.
The problem is that everything gets too small for my taste.
I hope it helps.
Brgds

I'm using Alroger cm10 20121108 and it works like a charm.
Cheers
Fiber7
Sent from my GT-P1000 using xda app-developers app

Related

Looking for a good stock rom replacement (smooth, stable, daily driver)

First of all - I made it, I just completed overcome guide and got Overcome 7 Series v4.1.0 and CWM Recovery - It's ok, but my goal is to get ICS/JB or stable but pimped GB rom.
Device: Samsung Galaxy P-1000 EU, from polish orange carrier with 3G modem.
Recovery: Overcome CWM 5.1.2.6
I tried to install [ROM][CM10][JB][4.1.2][SGT7][P1000/N/L][PDroid][20121127] but just messed up with CWM and had to re-stock tab again.
What I need - because it is for my uncle:
- stable, smooth good for daily using
- working 3G, Wifi, Wifi/USB Tether, Camera & Camcorder, Bluetooth
- no major issues like battery drain or too many soft reboots.
- PL Language
I prefer JB/ICS roms but pimped GB also will be cool.
Thanks
CM10 isn't messing up your tab.
You just have to flash it 3 times coming from GB ROM.
The final round should be the one that is flashing "system" and should take the longest.
Sent from my GT-P1000 using xda app-developers app
What do You mean by saying "flash it 3 times"? Which ROM should I use?
The one you quoted, by alroger.
Flash 3 times, means you choose to install zip from sdcard or external SD card, OK it, and when finish repeat again, and again.
While doubt it please read the output, don't just assume it says finish. And don't assume it is boot looping.
First round is quick, it replace your cwm with cwm 6.
Second time it converts partition from bml to mtd.
Third round the ROM.
Sent from my GT-P1000 using xda app-developers app
Thanks, so far I got first round done
Just for myself, I've been on everything from Overcome, through cm9, and cm10 and cm10.1 variants. I've just gone back to cm9 stable by humberos and so far it's been the best for me. I'm finding streaming videos better, haven't had any reboots. Having been on cm10 of some sort since they first appeared, I'm shocked how smooth and stable I'm finding cm9 and will be sticking with it.
I'm sure others will recommend something else. But for me, who is no techie and not that adept at tweeking, this has been the easiest, out of the box, no tweaking stable rom for me.
I got a CM10, everything is working. Just one issue, status bar. Sometimes the top area of app drawer, homescreen or in any app is going hmm.. under the status bar. Only reboot helps. Should I change DPI? 160 at the moment, or how in tablet mode get shortcuts to wifi/3g/tether/plane mode etc. buttons?
Ok, one more
How to change distance between rows in appdrawer? I like mixed tablet UI (160 DPI) and even a full tablet UI @120 DPI but font is too small, when I make it bigger in system preferences icons description are being cutted.

[Q&A] Marvel ICS - Highly Customizable ROM

Let us keep the Marvel ROM development thread clean. Where everyone can post here. Even newbies.
So all Q&A will go here.
Other senior members can help answer questions are also welcome here.
Helloo...im using your great rom for few days.Its quite good...but kinda slow for me with stock kernel(i know that i can flash other kernels) Can you add strong accord kernel ?
Thx
Sorry for bad Eng.
Sent from my LG-P970 using xda app-developers app
It is possible that the ROM provides customization options within the system and not at the time of the install mode similar CM10 that are based on?
For example: clock in the center or on the side, various styles of lockscreen, clock + date style, style icons and battery etc..
Another thing would be, you can deploy LED notifications?
Sorry my English.
crystallogenesis said:
Helloo...im using your great rom for few days.Its quite good...but kinda slow for me with stock kernel(i know that i can flash other kernels) Can you add strong accord kernel ?
Thx
Sorry for bad Eng.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Ok I will add strong accord in the install options.
elderap said:
It is possible that the ROM provides customization options within the system and not at the time of the install mode similar CM10 that are based on?
For example: clock in the center or on the side, various styles of lockscreen, clock + date style, style icons and battery etc..
Another thing would be, you can deploy LED notifications?
Sorry my English.
Click to expand...
Click to collapse
Customization options within system requires a lot xml file modifications. This will take some time. For notification, have you tried LG Touch LED Notification app? Its free on play store.
I've got a question about choosing apps, can i add my apps before install/flash rom? i mean, can i add my luncher, keyboard, im using holo luncher and swift key (both are bought) and it will be nice to have only them without others lunchers/keyboard.
AW: [Q&A] Marvel ICS - Highly Customizable ROM
darth2805 said:
I've got a question about choosing apps, can i add my apps before install/flash rom? i mean, can i add my luncher, keyboard, im using holo luncher and swift key (both are bought) and it will be nice to have only them without others lunchers/keyboard.
Click to expand...
Click to collapse
No that works not. Generally speaking you need something first to change it.
Sent from my LG-P970 using xda app-developers app
I just installed this rom since about a week, had some battery drain problems. I switched to the interactive governor and this got a bit better. One big drain is wifi, for this i installed an app which disconnects wifi when screen goes off and on again when i wake my phone. Another problem is that the phone is constantly awake and never goes into deep sleep. Any solution for that?
hi ppl, here is my review, i change to hellmanor kernel. first impression that its running good, i need a lot of battery and when i set to lionheart and cfq. i manage to have a working phone over 24 hrs with low usage, around 8 short calls, about 2 hrs of wifi, no data 2/3g at all, and around 1 hr of gaming. and few minutes ago i put to recharge, battery left b4 charge - 44%
the funny thing is that i notice that my phone start to ring very late while incoming calls, i use vibrate with sound, while a call is incoming, the phone vibrate around 5 sec b4 the sound kicks in, this wasn't happening with stock kernel.
do u think that it might be the governor i chose or maybe I/O ? maybe the low cpu speed when phone in deep sleep?
thanks
sol
Lockscreen
Hi Tantrums,
first thanks for you work.Greate job I have several questions. Is it possible turn off the locksreen rotation? I hate it If i get the sms or miss call, the notification bar show me. But if i turn off this in notification, sms still like unread. I want accept it from notification, not go to the sms or dialer and tap to miss call or sms. Last is GPS. After lock the satelites, gps work normal. But if i want use it for running, walking and others, gps is not realy correct. Sport tracker show me bad way, distance and speed. I guess gps use only few satellites. Do you can change this for next version? Please! Because you ROM is awesome.
Thanks you.
I wonder how I install CWM recovery without flashing the regular v20s via SFT? I tried not to install this custom CMW ('ve had problems with it to restore roms at other times) but could not.
I await your help.
Hello!
I have not been able to sort out the issue of date & time sync with my network provider, I have to do it manually & I have to go through all the pain every time I reboot my phone.
Also, is there any app to control the extensive battery drain?
chintan.bhaidani said:
Hello!
I have not been able to sort out the issue of date & time sync with my network provider, I have to do it manually & I have to go through all the pain every time I reboot my phone.
Also, is there any app to control the extensive battery drain?
Click to expand...
Click to collapse
from the Play Store, download and install "No-frills CPU Control". Open the program and set the governor to either "performance" or "interactive". Set the scheduler to "cfq". That should help with the battery. (it should actually double it).
Not sure about the time sync. Someone else was manually having to do it too.
Have you performed a factory reset via settings or the hidden menu?
chintan.bhaidani said:
Hello!
I have not been able to sort out the issue of date & time sync with my network provider, I have to do it manually & I have to go through all the pain every time I reboot my phone.
Also, is there any app to control the extensive battery drain?
Click to expand...
Click to collapse
Did you flash v30 baseband? Coz for me it solved the problem with auto time/date sync.
sent from my smart toaster
AW: [Q&A] Marvel ICS - Highly Customizable ROM
I had the problem with wrong time sync a lot with CM10 as I used a v20 baseband. After upgrading to v30 baseband I only had it with one CM10.1 ROM.
Sent from my LG-P970 using xda app-developers app
is there any difference if its Unknown baseband or flashing a baseband?
marckjao said:
is there any difference if its Unknown baseband or flashing a baseband?
Click to expand...
Click to collapse
I used the base band from Huexxx when I updated from GB to ICS:
http://huexxxtuff.blogspot.com.es/2013/01/izs-rom-links.html
You should be able to change the base band even after you install a ROM image.
Hi, I'd like to try this ROM but I just have a few quick questions as I couldn't find a clear answer reading through all the posts in this thread and the dev. thread...
Is flashing the baseband absolutely essential to run this ROM? I currently have V20j as I'm in Canada on the Koodo (Telus) provider. I noticed the basebands (versions V30x) are for Europe and Germany etc. Would this not cause an issue as I'm in Canada? Would the language still be in English?
Also there are several baseband versions, I'm not sure which one I should use. Can anyone help me understand which one I should use (if any)?
Does this ROM contain it's one gapps version as well as it's own Kernel? (I'm currently using kernel 3.0.8)
I'm currently running Mackay 2.7.6 (JB 4.2.2) so I'm assuming just a factory/data wipe, wipe dalvik cache, wipe cache, and install the zips from SD, correct?
Can someone confirm the bluetooth works with this ROM (audio works) as well as camera works completely?
Thanks in advance.
I will try with the v30 baseband.
MEC-777 said:
Hi, I'd like to try this ROM but I just have a few quick questions as I couldn't find a clear answer reading through all the posts in this thread and the dev. thread...
Is flashing the baseband absolutely essential to run this ROM? I currently have V20j as I'm in Canada on the Koodo (Telus) provider. I noticed the basebands (versions V30x) are for Europe and Germany etc. Would this not cause an issue as I'm in Canada? Would the language still be in English?
Click to expand...
Click to collapse
No it's not essential. I don't know if it's better to stay with your baseband or flash the european open. I would first stay with the one you have and than after a few days try the v30 one, if v30 works well it's probably better. You know that some contries in europe speek English too? (Like England.)
Does this ROM contain it's one gapps version as well as it's own Kernel? (I'm currently using kernel 3.0.8)
I'm currently running Mackay 2.7.6 (JB 4.2.2)
Click to expand...
Click to collapse
Your getting something complettly wrong here, this is not CM9 based it's based on the oficiall LG v30b, so Gapps are not needed (you could say there already included, but it's more like there not removed). Marvel11 comes with aroma installer and includs 3 different kernels. Mackay is CM10.1 based, so everything is different, the kernel for sure.
Can someone confirm the bluetooth works with this ROM (audio works) as well as camera works completely?
Click to expand...
Click to collapse
Camera works, GPS didn't for me (europe) but it might for you, bluetooth I hardly ever use so I can't garantie but it works on other v30 based ROMs so I don't see why not. (As said it's not CM9 based.)
Don't make a fuss just try it, it should work. If it doesn't you probably made something wrong, than come back explain what you did and probably a few ppl can help you.
do we need to flash v30 baseband separately? doesn't it gets flashed along with the ROM?

Seeking Help regarding Vanilla Rootbox rom - Quick Tiles Toggles

hello all & @AA1973,
the rootbox rom is having issues on my note specifically with the power tile toggles.
i mean power widgets or CM toggles in the left work just fine but I cannot, I mean NOT AT ALL enable the tile toggles.
pls help.
video attached for reference.
pls dont tell me to download the latest nightly and check the download and stuff like that.
i have done all that sooooo many times I cant recall the count of it..
AND also it works perfectly on roms such as JellyBeer, JellyBam, PA and almost other CM based roms.
Only issue is with rootbox.
duno why?
pls help.
regards
http://www.youtube.com/watch?v=Um-SNrzUgFY&feature=youtu.be
PS- this post is meant for seeking help and I have no intention to point out a bug in the rom coz for others it seems to work perfectly..
Well just flashes latest stunner by neo and also big foot rom by drew garren
And the same problem persists.
What is happening.
Shot
Regrets
Some one help
Regards
Thanks for your efforts and sorry for having discredited what you were writing before. What you showed us in the video, thanks for that, is absolutely not normal.
How did you flash it? Wipe data?
Also format /system or ?/preload (although maybe unnecessary)?
Which Rom were you running prior to this?
Do you use stock kernel?
thanks for the reply Alexander.
I was running jelly beer prior to this.
I never dirty flash.
although I havea dirty habit of format everything.
even preload and emmc apart from cache data system preload etc, after the standard 3 formats and wipes.
I never change the kernel.
dunno why is it happening.
now after trying out the latest 4-5 rooms around the net I have finally flashed BB's PAC.
it's perfect now.
both the power toggles and quick tiles are working
STRANGE
anyways thanks for your time.
hopefully it gets solved in the stable release of rootbox 4 by Bajee
but maybe I might get myself a note 2 by the time.
regards
Glass you got it sorted. :thumbup: it is still strange. What you could do is to grab a logcat (lolcat™) while clicking on the icon to switch to quick tiles.
Did the sliding feature with the bottom bar didnt work out neither?
BTW my name is not #Alexander
thanks Andreas Adam, if I am not wrong.
sorry for Alexandering u....
as for the logcat i cant do it as I have reflash the rom and after the LC again reflash my current rom..
that would be sick..
anyways thanks for all the help..
regards
PS- didn't fully understand this
"Did the sliding feature with the bottom bar didnt work out neither?"
so, AA, any news whether the problem might be resolved in upcoming nightly by bajee.
if at all there is a problem with the build and not my note..
regards
I'm also having this problem

[Q] Stuck with Ginerbread 2.3.6, Slowdown. Need Help

Hi Guys,
I am a Galaxy S user. My Galaxy S was bought in Finland and still running (basically stuck with) Ginerbread 2.3.6 (I9000xxJVU). The phone's hardware is just fine (except slow GPS) but it has become paninfully slow and sometime shutting down/restarting on it's own.
Is it a good idea to reset the existing GingerBread 2.3.6 or get a different ROM?
I am a total novice and have not tried any other ROMs on it. I did some research about the alternative ROMs but there are so many options it made me really confused.
Could you guys suggest any stable and fast option for my Galaxy S i9000?
Also, if you could guide how I could migrate to that particular ROM from present Gingerbread, it would be really helpful.
Thanks in advance for your support and for this great forum.
Cheers
SKT
No reply?!
Could anyone please help?
Hi,I'm not going to be much help as I'm a noob myself but I can say I had same stock laggy gt 19000 which through like u said a lot of confusion about rooting and ROMs researching XDA and YouTube you can do it my galaxy s is like a new phone so stick with it,one tip is always stick to you model and kernel version and write things down and I hope it goes as well as it did for me. Btw I used Odin 3.1 and clockwork to root and Flashed ROM with Cm 10.1 stable.
Sent from GT-19000 CM 10.1. stable
saiko7 said:
Hi Guys,
I am a Galaxy S user. My Galaxy S was bought in Finland and still running (basically stuck with) Ginerbread 2.3.6 (I9000xxJVU). The phone's hardware is just fine (except slow GPS) but it has become paninfully slow and sometime shutting down/restarting on it's own.
Is it a good idea to reset the existing GingerBread 2.3.6 or get a different ROM?
I am a total novice and have not tried any other ROMs on it. I did some research about the alternative ROMs but there are so many options it made me really confused.
Could you guys suggest any stable and fast option for my Galaxy S i9000?
Also, if you could guide how I could migrate to that particular ROM from present Gingerbread, it would be really helpful.
Thanks in advance for your support and for this great forum.
Cheers
SKT
Click to expand...
Click to collapse
if you want to stay to 2.3.6 you can just factory reset your phone
Try this
Shut your Android Galaxy S down (Power off) or remove Battery.
Now press Volume up, Home and Power together.
If the Samsung Symbol is coming up leave the Home Button.
Then there is a boot Menu
Volume Up and Down to Navigate , Home to select the chosen option. ( factory reset )
---------------
if you want to upgrade to ICS or JB rom
root your firmware , choose the right cf-root from this thread
http://forum.xda-developers.com/showthread.php?t=788108
download ICS rom ( i suggest this one )
http://forum.xda-developers.com/showthread.php?t=1687727
install it via recovery
if you want to upgrade to JB
go to development section , chose any custom rom you want
and install via recovery
push thanks :good: if i helped you
The Tox said:
if you want to stay to 2.3.6 you can just factory reset your phone
Try this
Shut your Android Galaxy S down (Power off) or remove Battery.
Now press Volume up, Home and Power together.
If the Samsung Symbol is coming up leave the Home Button.
Then there is a boot Menu
Volume Up and Down to Navigate , Home to select the chosen option. ( factory reset )
---------------
if you want to upgrade to ICS or JB rom
root your firmware , choose the right cf-root from this thread
http://forum.xda-developers.com/showthread.php?t=788108
download ICS rom ( i suggest this one )
http://forum.xda-developers.com/showthread.php?t=1687727
install it via recovery
if you want to upgrade to JB
go to development section , chose any custom rom you want
and install via recovery
push thanks :good: if i helped you
Click to expand...
Click to collapse
Thank you mistrp74 and The Tox for the help.
I am still a bit confused, I cant seem to locate the right cf-root [Ginerbread 2.3.6 (I9000xxJVU)] from the thread you mentioned.
One more thing, how is your experience of running the Custom Roms, is it much better than the Samsung Firmware? Does all the function work fine?
I will need a bit of spoon feeding in the beginning for the update... as I have never tried it before and I am scared of bricking my phone.
So, please don't give up on me
saiko7 said:
Thank you mistrp74 and The Tox for the help.
I am still a bit confused, I cant seem to locate the right cf-root [Ginerbread 2.3.6 (I9000xxJVU)] from the thread you mentioned.
One more thing, how is your experience of running the Custom Roms, is it much better than the Samsung Firmware? Does all the function work fine?
I will need a bit of spoon feeding in the beginning for the update... as I have never tried it before and I am scared of bricking my phone.
So, please don't give up on me
Click to expand...
Click to collapse
The right CF-Root is in the seond to last post on the first page I believe- if you can fnd the one for XXJW4, the one you need is right above it
Custom ICS/JB roms are definitely smoother in many ways, although bear in mind because stock Jelly Bean don't include them, both FM Radio and 3G video calling won't work by default (two features of stock roms, I guess AllShare is another if you use it like me). Otherwise every other function is stable and rock solid. Except for the CM10.2 builds, which are still in an initial stage, the JB roms here should have everything working fine.
Sent from my GT-P7510
Thanks a lot guys!
I finally managed to do it.
I installed the CF-Root without any problem but RemICS-UX v1.3.1 (Team Remics) didn't load. It was stuck at the boot screen.
I thought I bricked my phone... but then I installed Ginerbread 2.3.6 (I9000xxJVU) using Odin and then installed plain vanilla ICS 4.0.3
Coming from Ginerbread 2.3.6 I find a lot of new things and the phone is also snappy and responsive... my old Galaxy S is acting almost like a new phone! So I am really happy.
Now that I am familiar with the process I am confident to tryout other ROMs...
I would like something simple, lightweight and fully-functional/bug-free.
So please let me know if there is any other better ROM I should try.
Thanks again guys!
saiko7 said:
Thanks a lot guys!
I finally managed to do it.
I installed the CF-Root without any problem but RemICS-UX v1.3.1 (Team Remics) didn't load. It was stuck at the boot screen.
I thought I bricked my phone... but then I installed Ginerbread 2.3.6 (I9000xxJVU) using Odin and then installed plain vanilla ICS 4.0.3
Coming from Ginerbread 2.3.6 I find a lot of new things and the phone is also snappy and responsive... my old Galaxy S is acting almost like a new phone! So I am really happy.
Now that I am familiar with the process I am confident to tryout other ROMs...
I would like something simple, lightweight and fully-functional/bug-free.
So please let me know if there is any other better ROM I should try.
Thanks again guys!
Click to expand...
Click to collapse
Go to development section and browse thread and read members feedback , and give a try for each rom until you find your best rom
The Tox said:
Go to development section and browse thread and read members feedback , and give a try for each rom until you find your best rom
Click to expand...
Click to collapse
Thanks!
Just one more question, what's your backup strategy that you guys use?
Or else it a lot of work to update each and every app... one by one... also what about the SMS, call log etc?
saiko7 said:
Thanks!
Just one more question, what's your backup strategy that you guys use?
Or else it a lot of work to update each and every app... one by one... also what about the SMS, call log etc?
Click to expand...
Click to collapse
Because I'm a person who 1.) doesn't use too many apps and 2.) tries to be as economical as possible, I don't have a large amount to backup. My contacts and calendar are always through Google, and for SMS I use SMS Backup and Restore on Play Store. Call log I don't keep, because I'm not a person who really cares for call logs. I only have one other app, Colornote, and that's cloud-synced as well.
Everything else I need is in internal storage :3
Sent from my GT-P7510
saiko7 said:
Thanks!
Just one more question, what's your backup strategy that you guys use?
Or else it a lot of work to update each and every app... one by one... also what about the SMS, call log etc?
Click to expand...
Click to collapse
I use G CLOUD BACKUP just for Sms and system settings
Sent from my GT-I9000 using xda app-developers app
More or less similar situation as TS
Hey guys,
Im in a more or less similar situation as the topic starter. My Samsung Galaxy S GT-I9000 has gotten slow and unresponsive with time.
I would like to update to a custom ROM, and got a little curious about the Slim Bean. But I feel a little unsure about how to proceed.
I'm currently running a custom Gingerbread 2.3.3 ROM, my device is rooted. I flashed this ROM from the Froyo that came with the phone about 2 years ago. It's been so long since I flashed this, I need some directions, as Im afraid I will brick my device.
When I go to recovery mode I see it runs ClockworkMod Recovery v2.5.1.3 - Voodoo lagfix.
Can I just put a Slim Bean 4.2 android version on my internal sd card and run "install zip from sdcard" in ClockwordMod? I would prefer to flash the latest stable version of Slim Bean, which would that be 4.2.2.build7-OFFICIAL?'
Any help would be greatly appreciated,
Bootism
Best way to update from gb or even older to jb is imo the way over cyanogenmod.
Follow this tutorial for 10.1: http://wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd
And then you can upgrade via cwm to the very good slim bean.
Sent from my GT-I9000 using xda app-developers app
Thanks for the answer!
I recall reading about lots of issues with the lagfix and flashing ROMs. My file storage system is in ext4 instead of standard rfs, I think I should somehow undo this if I recall correct. Is this true?
Do you have an option to unlagfix in recovery?
Sent from my GT-P3110 using xda app-developers app
Yeah, I can choose "voodoo lagfix" in recovery.
It has the following options:
- disable lagfix
- enable lagfix (default)
- /system lagfix on (default)
- /system lagfix off
- debug off (default)
- debug on
Enter disable lagfix and reboot
Sent from my GT-I9000 using xda app-developers app
Ok, so I got Cyanogenmod 10.1.0 running! so far so good
Good job. Now you can flash a zip in cwm.
Sent from my GT-I9000 using xda app-developers app
Yeah, it's a whole new world opening up. Old phone runs relatively smooth, at least way better than before thanks for helping. I will stay on this Cyanogenmod for a bit and explore. Can I just flash in any of the ROMs as .zip in CWM later? I will look for a lightweight ROM for my old phone, any suggestions?

[Q&A] [ROM][GT-I9305][KitKat][4.4.4] CyanogenMod 11.0 Official

Q&A for [ROM][GT-I9305][KitKat][4.4.4] CyanogenMod 11.0 Official
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
GT-i9305 CM11 known issues (or DONE/TODO lists)
Hi all,
I'm interested on CM11 in GT-i9305 (I own gt-i9305, I'm running running CM10 and I would have some new features included in CM11 (i.e.: LowEnergy Bluetooth). Btw I'm afraid about it because CM11 has not a stable release, maybe it will never has a stable(/RC) release... So I'd like to know what features are running and what else is not running... because I'd like to have new (CM11) features but I want my phone to not lose what is ok in CM10...
Looking at Known Issues page (wiki - Known_Issues_page_for_i9305) I see CM10.1 and CM10.2 related issues... but not CM11 ones...
There are any lists that users can see to make a conscious chose? I want to assess what features I'm going to lose upgrading to CM11 (camera was working in CM10... it doesn't work in CM11, I suppose).
I know gt-i9305 CM11 official thread... btw it's more than 100 pages, so Its not useful.
My revious phone was Motorola-Defy (MB525) and CM thread (first message) spoke about features, installing procedure, TODO list, know issues... GT-i9305 CM11 official thread doesn't include TODO (not running list)
Thanks in advance
LOW MICROPHONE VOLUME (videorec - whatsapp...)
how to fix this problem????
low volume on call
Hi,
Can anyone help with the problem of a very low speaker volume during call?
I have read here about changing the numerical values ​​somewhere to increase the volume.
in addition, ther's the problem of low microphon rec.
i run nighitly 11-20141031.
(step-by-step would be much appreciated )
Well from what I have seen. Not sure if its true just yet but maclaw who works on s3 mini and other devices is ready to clone the lollipop repo when it gets released by google
Sent from my GT-N7105 using XDA Free mobile app
---------- Post added at 08:41 AM ---------- Previous post was at 08:39 AM ----------
CNerone said:
Hi all,
I'm interested on CM11 in GT-i9305 (I own gt-i9305, I'm running running CM10 and I would have some new features included in CM11 (i.e.: LowEnergy Bluetooth). Btw I'm afraid about it because CM11 has not a stable release, maybe it will never has a stable(/RC) release... So I'd like to know what features are running and what else is not running... because I'd like to have new (CM11) features but I want my phone to not lose what is ok in CM10...
Looking at Known Issues page (wiki - Known_Issues_page_for_i9305) I see CM10.1 and CM10.2 related issues... but not CM11 ones...
There are any lists that users can see to make a conscious chose? I want to assess what features I'm going to lose upgrading to CM11 (camera was working in CM10... it doesn't work in CM11, I suppose).
I know gt-i9305 CM11 official thread... btw it's more than 100 pages, so Its not useful.
My revious phone was Motorola-Defy (MB525) and CM thread (first message) spoke about features, installing procedure, TODO list, know issues... GT-i9305 CM11 official thread doesn't include TODO (not running list)
Thanks in advance
Click to expand...
Click to collapse
I have been running cm11 since first release. And its been getting better with each release.. The latest nightly with Agni kernel is a good daily driver. I haven't found any problems.
Sent from my GT-N7105 using XDA Free mobile app
Does anybody faces problem with missing calender in latest nightly?
All I got is "missing calendar storage"
guide me
hello sir.,
help me and guide me to update kitkat 4.4.4.
i have samsung galaxy s3 I9305 LTE
AP: I9305XXUEMKC
CP: I9305CCUEMK1
CSC: I9305VDIEMK2
(in my phone i have vodafone applications may be it is vodafone carrier .i have bought in UAE ( dubai) ).
Is there any chance to update kitkat 4.4.4 germany (DBT) official update to my s3 LTE.
if i update to germany 4.4.4 kitkat .any thing will going to brick my s3 LTE.
please suggest me i am kindly waiting for your replay.....
if there is no problem to update kitkat 4.4.4 .please provide perfect procedure sir...
Has anyone started compiling cm12 for the i9305 yet???
Sent from my GT-N7105 using XDA Free mobile app
Moving on...
Just wanted to say thanks for the last years with cyanogenmod for i9305.
Im moving on to the Sony parts of XDA.
Trying to catch a burglar last week resulted in a broken samsung, and I thought I would try something new.
cm12
does anyone know when the CM12 will be available ?
thanks for this awesome rom
no future updates?
Does this mean that there will be no CM11 update for I9305?
Cm11 - any way to turn of charging led notification when screen is on
Hi, is there any way to disable charging led notification light when the screen is on? i have tried many apps from play store but none have option to disable when the screen is on. Even no xposed modules are helpful in this regard.
Secondly please guide me the way to fix led light turns green at reaching 90%, this issue was previously solved in CM10.
Thank you.
please help
please help!
noteespirit said:
Hi, is there any way to disable charging led notification light when the screen is on? i have tried many apps from play store but none have option to disable when the screen is on. Even no xposed modules are helpful in this regard.
Secondly please guide me the way to fix led light turns green at reaching 90%, this issue was previously solved in CM10.
Thank you.
Click to expand...
Click to collapse
WiFi Power Saving Mode
Is there anyway to turn off WiFi power saving mode on CM11, Beacuse i cannot connect to WiFi in any other way for some reason and when i try to it just says (saved and secured > authenticating and then it just goes back and says saved and secured)
And sorry im very new to CM11 and forums in general!
Power off charging animation stuck.
The charging animation on my phone gets stuck when I turn my phone off. Are there any fixes?
Thanks
Samsung I9305 Dock Audio with Cyanogenmod 11 fix
Since installing Cyanogenmod KitKat4.4.4, 11-20150105-NIGHTLY-i9305, the main issue I had was I could no longer use my Samsung Desktop Dock EDD-D200BE to output audio, with the help of TKMAS on the Cyanogenmod Forum, I found there was an issue with the "audio_policy.conf" file, located in system/etc, it was missing a line of text in the devices line under "audio_hw_modules" just adding to the end of the line the following
|AUDIO_DEVICE_OUT_DGTL_DOCK_HEADSET
and saving the file, rebooted my phone and audio now comes out of the dock, I found the audio_policy.conf info here https://android.googlesource.com/device/samsung/manta/+/jb-mr1-dev/audio_policy.conf
CM WiFi power saving mode
Yes. Just go to Settings->Wi-Fi and then click on Menu->Advanced. You'll find here useful options such as "Keep Wi-Fi on during sleep", "Wi-Fi optimization" and "Avoid poor connections"
RunamukOG said:
Is there anyway to turn off WiFi power saving mode on CM11, Beacuse i cannot connect to WiFi in any other way for some reason and when i try to it just says (saved and secured > authenticating and then it just goes back and says saved and secured)
And sorry im very new to CM11 and forums in general!
Click to expand...
Click to collapse
same problem here
Just had my stint with the latest two official nightlies, 0406 and 0412, and the camera is even worse when I first tried this rom in january. FCs, cant connents, even freezes up and reboots the phone, on a few days old, fresh wiped install. The so called "fix" just removed my camera as a whole, even other apps (Insta, Google camera), and full factory reset didnt work after that. I had to reflash from zip.
idk if this is the right thread to ask but...
what is this camera problem, and if there was a fix, why isnt this integrated in CM ages ago?
whats the point of compiling official CM nightlies till its camera is not working flawlessly out of the box? completely useless this way.
how come theres nothing in the developement thread, when almost every week a new compile comes out?
and foremost, who compiles these official nightlies when the OP behind it declared out of the project..???
sorry if im noob, but someone can explain this to me? CM is a huge disappointment for me, as I waited eagerly to put it up as my phone warranty expires. I never thought Id say stock TWiz is much better then this.
but im willing to give another try if someone helps who to get this working properly out of the box, because I liked the speed and simplicity. thx...
---------- Post added at 01:48 PM ---------- Previous post was at 01:41 PM ----------
chrizza710 said:
thanks for this awesome rom
Click to expand...
Click to collapse
sorry to ask, but You still use this rom? Is the camera worked OK for you? What nightly was that then, when you wrote this post, and you still use that, or updated it? thx.

Categories

Resources